{
    "id": "bq_hephestos",
    "version": 1, 
    "name": "BQ Prusa i3 Hephestos",
    "manufacturer": "Other",
    "author": "BQ",
    "platform": "bq_hephestos_platform.stl",
    "file_formats": "text/x-gcode",
    "inherits": "fdmprinter.json",

    "machine_settings": {
        "machine_start_gcode": {
            "default": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z15.0 F1200          ;move Z to position 15.0 mm\nG92 E0                  ;zero the extruded length\nG1 E20 F200             ;extrude 20mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F7200                ;set feedrate to 120 mm/sec\n; -- end of START GCODE --"
        },
        "machine_end_gcode": {
            "default": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nG91                     ;set to relative positioning\nG1 E-20 F300            ;retract the filament a bit to release some of the pressure\nG1 Z10                  ;move extruder up 10 mm\nG90                     ;set to absolute positioning\nG1 X0 Y180 F1200        ;expose the platform\nM84                     ;turn off steppers\n; -- end of END GCODE --"
        },
        "machine_width": {
            "default": 215
        },
        "machine_depth": {
            "default": 210
        },
        "machine_height": {
            "default": 180
        },
        "machine_heated_bed": {
            "default": false
        },
        "machine_center_is_zero": {
            "default": false
        },
        "machine_gcode_flavor": {
            "default": "RepRap"
        },
        "machine_platform_offset": {
            "default": [0, -82, 0]
        }
    },
    "overrides": {
        "layer_height": { "default": 0.2 },
        "layer_height_0": { "default": 0.2, "visible": false },
        "shell_thickness": { "default": 1.0 },
        "wall_thickness": { "default": 1.0, "visible": false },
        "top_bottom_thickness": { "default": 1.0, "visible": false},
        "bottom_thickness": { "default": 1.0, "visible": false },
        "material_print_temperature": { "default": 220, "visible": true },
        "material_bed_temperature": { "default": 0, "visible": false },
        "material_diameter": { "default": 1.75, "visible": true },
        "speed_print": { "default": 40.0},
        "speed_infill": { "default": 40.0, "visible": true },
        "speed_wall": { "default": 35.0, "visible": true},
        "speed_topbottom": { "default": 35.0, "visible": true },
        "speed_travel": { "default": 120.0 },
        "speed_layer_0": { "default": 20.0, "visible": false },
        "retraction_speed": { "default": 30.0, "visible": false},
        "retraction_amount": { "default": 2.0, "visible": false },
        "retraction_hop": { "default": 0.075, "visible": false },
        "support_enable": { "default": true }
    }
}