{
    "version": 2,
    "name": "Neptune 2",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Toylerrr",
        "manufacturer": "Elegoo",
        "file_formats": "text/x-gcode",
        "platform": "elegoo_neptune_2.stl",
        "has_machine_quality": true,
        "machine_extruder_trains": { "0": "elegoo_neptune2_extruder_0" },
        "platform_offset": [
            0,
            0,
            0
        ],
        "preferred_quality_type": "normal"
    },
    "overrides":
    {
        "adhesion_type": { "default_value": "skirt" },
        "brim_width": { "default_value": 5 },
        "gantry_height": { "value": 30 },
        "machine_depth": { "default_value": 235 },
        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F1600 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z" },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_head_with_fans_polygon":
        {
            "value": [
                [-30, 35],
                [-30, -10],
                [25, 35],
                [25, -10]
            ]
        },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 260 },
        "machine_name": { "default_value": "ELEGOO Neptune 2" },
        "machine_start_gcode": { "default_value": ";simage\n;gimage\nG28 ;home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X1.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X1.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X1.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X1.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up" },
        "machine_width": { "default_value": 235 },
        "material_diameter": { "default_value": 1.75 },
        "material_standby_temperature":
        {
            "default_value": 200,
            "settable_per_extruder": false
        },
        "raft_airgap": { "default_value": 0.25 },
        "raft_margin": { "default_value": 5 },
        "retraction_amount": { "default_value": 5 },
        "retraction_enable": { "default_value": true },
        "retraction_speed": { "default_value": 70 },
        "skin_angles":
        {
            "default_value": [45, 135]
        },
        "speed_print": { "value": 60.0 },
        "z_seam_corner": { "default_value": "z_seam_corner_weighted" },
        "z_seam_type": { "default_value": "back" }
    }
}