// Copyright (c) 2017 Ultimaker B.V.
// Uranium is released under the terms of the LGPLv3 or higher.

import QtQuick 2.7
import QtQuick.Controls 1.1
import QtQuick.Controls.Styles 1.1
import QtQuick.Layouts 1.2

import UM 1.2 as UM
import Cura 1.0 as Cura

import "../Menus"

Item
{
    id: base;

    property QtObject settingVisibilityPresetsModel: CuraApplication.getSettingVisibilityPresetsModel()
    property Action configureSettings
    property bool findingSettings
    signal showTooltip(Item item, point location, string text)
    signal hideTooltip()

    Item
    {
        id: globalProfileRow
        height: UM.Theme.getSize("sidebar_setup").height
        visible: !sidebar.hideSettings

        anchors
        {
            top: parent.top
            left: parent.left
            leftMargin: Math.round(UM.Theme.getSize("sidebar_margin").width)
            right: parent.right
            rightMargin: Math.round(UM.Theme.getSize("sidebar_margin").width)
        }

        Label
        {
            id: globalProfileLabel
            text: catalog.i18nc("@label","Profile:");
            width: Math.round(parent.width * 0.45 - UM.Theme.getSize("sidebar_margin").width - 2)
            font: UM.Theme.getFont("default");
            color: UM.Theme.getColor("text");
            verticalAlignment: Text.AlignVCenter
            anchors.top: parent.top
            anchors.bottom: parent.bottom
        }

        ToolButton
        {
            id: globalProfileSelection

            text: generateActiveQualityText()
            enabled: !header.currentExtruderVisible || header.currentExtruderIndex > -1
            width: Math.round(parent.width * 0.55)
            height: UM.Theme.getSize("setting_control").height
            anchors.left: globalProfileLabel.right
            anchors.right: parent.right
            tooltip: Cura.MachineManager.activeQualityOrQualityChangesName
            style: UM.Theme.styles.sidebar_header_button
            activeFocusOnPress: true
            menu: ProfileMenu { }

            function generateActiveQualityText () {
                var result = Cura.MachineManager.activeQualityOrQualityChangesName;

                if (Cura.MachineManager.isActiveQualitySupported) {
                    if (Cura.MachineManager.activeQualityLayerHeight > 0) {
                        result += " <font color=\"" + UM.Theme.getColor("text_detail") + "\">"
                        result += " - "
                        result += Cura.MachineManager.activeQualityLayerHeight + "mm"
                        result += "</font>"
                    }
                }

                return result
            }

            UM.SimpleButton
            {
                id: customisedSettings

                visible: Cura.MachineManager.hasUserSettings
                height: Math.round(parent.height * 0.6)
                width: Math.round(parent.height * 0.6)

                anchors.verticalCenter: parent.verticalCenter
                anchors.right: parent.right
                anchors.rightMargin: Math.round(UM.Theme.getSize("setting_preferences_button_margin").width - UM.Theme.getSize("sidebar_margin").width)

                color: hovered ? UM.Theme.getColor("setting_control_button_hover") : UM.Theme.getColor("setting_control_button");
                iconSource: UM.Theme.getIcon("star");

                onClicked:
                {
                    forceActiveFocus();
                    Cura.Actions.manageProfiles.trigger()
                }
                onEntered:
                {
                    var content = catalog.i18nc("@tooltip","Some setting/override values are different from the values stored in the profile.\n\nClick to open the profile manager.")
                    base.showTooltip(globalProfileRow, Qt.point(-UM.Theme.getSize("sidebar_margin").width, 0),  content)
                }
                onExited: base.hideTooltip()
            }
        }
    }

    ToolButton
    {
        id: settingVisibilityMenu

        width: height
        height: UM.Theme.getSize("setting_control").height
        anchors
        {
            top: globalProfileRow.bottom
            topMargin: UM.Theme.getSize("sidebar_margin").height
            right: parent.right
            rightMargin: UM.Theme.getSize("sidebar_margin").width
        }
        style: ButtonStyle
        {
            background: Item {
                UM.RecolorImage {
                    anchors.verticalCenter: parent.verticalCenter
                    anchors.horizontalCenter: parent.horizontalCenter
                    width: UM.Theme.getSize("standard_arrow").width
                    height: UM.Theme.getSize("standard_arrow").height
                    sourceSize.width: width
                    sourceSize.height: width
                    color: control.enabled ? UM.Theme.getColor("setting_category_text") : UM.Theme.getColor("setting_category_disabled_text")
                    source: UM.Theme.getIcon("menu")
                }
            }
            label: Label{}
        }
        menu: SettingVisibilityPresetsMenu
        {
            onShowAllSettings:
            {
                definitionsModel.setAllVisible(true);
                filter.updateDefinitionModel();
            }
        }
    }

    Rectangle
    {
        id: filterContainer
        visible: true

        border.width: Math.round(UM.Theme.getSize("default_lining").width)
        border.color:
        {
            if(hoverMouseArea.containsMouse || clearFilterButton.containsMouse)
            {
                return UM.Theme.getColor("setting_control_border_highlight");
            }
            else
            {
                return UM.Theme.getColor("setting_control_border");
            }
        }

        color: UM.Theme.getColor("setting_control")

        anchors
        {
            top: globalProfileRow.bottom
            topMargin: UM.Theme.getSize("sidebar_margin").height
            left: parent.left
            leftMargin: UM.Theme.getSize("sidebar_margin").width
            right: settingVisibilityMenu.left
            rightMargin: Math.floor(UM.Theme.getSize("default_margin").width / 2)
        }
        height: visible ? UM.Theme.getSize("setting_control").height : 0
        Behavior on height { NumberAnimation { duration: 100 } }

        Timer
        {
            id: settingsSearchTimer
            onTriggered: filter.editingFinished()
            interval: 500
            running: false
            repeat: false
        }

        TextField
        {
            id: filter;
            height: parent.height
            anchors.left: parent.left
            anchors.right: clearFilterButton.left
            anchors.rightMargin: Math.round(UM.Theme.getSize("sidebar_margin").width)

            placeholderText: catalog.i18nc("@label:textbox", "Search...")

            style: TextFieldStyle
            {
                textColor: UM.Theme.getColor("setting_control_text");
                placeholderTextColor: UM.Theme.getColor("setting_control_text")
                font: UM.Theme.getFont("default");
                background: Item {}
            }

            property var expandedCategories
            property bool lastFindingSettings: false

            onTextChanged:
            {
                settingsSearchTimer.restart()
            }

            onEditingFinished:
            {
                definitionsModel.filter = {"i18n_label": "*" + text};
                findingSettings = (text.length > 0);
                if(findingSettings != lastFindingSettings)
                {
                    updateDefinitionModel();
                    lastFindingSettings = findingSettings;
                }
            }

            Keys.onEscapePressed:
            {
                filter.text = "";
            }

            function updateDefinitionModel()
            {
                if(findingSettings)
                {
                    expandedCategories = definitionsModel.expanded.slice();
                    definitionsModel.expanded = [""]; // keep categories closed while to prevent render while making settings visible one by one
                    definitionsModel.showAncestors = true;
                    definitionsModel.showAll = true;
                    definitionsModel.expanded = ["*"];
                }
                else
                {
                    if(expandedCategories)
                    {
                        definitionsModel.expanded = expandedCategories;
                    }
                    definitionsModel.showAncestors = false;
                    definitionsModel.showAll = false;
                }
            }
        }

        MouseArea
        {
            id: hoverMouseArea
            anchors.fill: parent
            hoverEnabled: true
            acceptedButtons: Qt.NoButton
            cursorShape: Qt.IBeamCursor
        }

        UM.SimpleButton
        {
            id: clearFilterButton
            iconSource: UM.Theme.getIcon("cross1")
            visible: findingSettings

            height: Math.round(parent.height * 0.4)
            width: visible ? height : 0

            anchors.verticalCenter: parent.verticalCenter
            anchors.right: parent.right
            anchors.rightMargin: UM.Theme.getSize("default_margin").width

            color: UM.Theme.getColor("setting_control_button")
            hoverColor: UM.Theme.getColor("setting_control_button_hover")

            onClicked:
            {
                filter.text = "";
                filter.forceActiveFocus();
            }
        }
    }

    ScrollView
    {
        anchors.top: filterContainer.bottom;
        anchors.bottom: parent.bottom;
        anchors.right: parent.right;
        anchors.left: parent.left;
        anchors.topMargin: filterContainer.visible ? UM.Theme.getSize("sidebar_margin").height : 0
        Behavior on anchors.topMargin { NumberAnimation { duration: 100 } }

        style: UM.Theme.styles.scrollview;
        flickableItem.flickableDirection: Flickable.VerticalFlick;
        __wheelAreaScrollSpeed: 75; // Scroll three lines in one scroll event

        ListView
        {
            id: contents
            spacing: Math.round(UM.Theme.getSize("default_lining").height);
            cacheBuffer: 1000000;   // Set a large cache to effectively just cache every list item.

            model: UM.SettingDefinitionsModel
            {
                id: definitionsModel;
                containerId: Cura.MachineManager.activeDefinitionId
                visibilityHandler: UM.SettingPreferenceVisibilityHandler { }
                exclude: ["machine_settings", "command_line_settings", "infill_mesh", "infill_mesh_order", "cutting_mesh", "support_mesh", "anti_overhang_mesh"] // TODO: infill_mesh settigns are excluded hardcoded, but should be based on the fact that settable_globally, settable_per_meshgroup and settable_per_extruder are false.
                expanded: CuraApplication.expandedCategories
                onExpandedChanged:
                {
                    if(!findingSettings)
                    {
                        // Do not change expandedCategories preference while filtering settings
                        // because all categories are expanded while filtering
                        CuraApplication.setExpandedCategories(expanded)
                    }
                }
                onVisibilityChanged: Cura.SettingInheritanceManager.forceUpdate()
            }

            property var indexWithFocus: -1

            delegate: Loader
            {
                id: delegate

                width: Math.round(UM.Theme.getSize("sidebar").width);
                height: provider.properties.enabled == "True" ? UM.Theme.getSize("section").height : - contents.spacing
                Behavior on height { NumberAnimation { duration: 100 } }
                opacity: provider.properties.enabled == "True" ? 1 : 0
                Behavior on opacity { NumberAnimation { duration: 100 } }
                enabled:
                {
                    if (!Cura.ExtruderManager.activeExtruderStackId && machineExtruderCount.properties.value > 1)
                    {
                        // disable all controls on the global tab, except categories
                        return model.type == "category"
                    }
                    return provider.properties.enabled == "True"
                }

                property var definition: model
                property var settingDefinitionsModel: definitionsModel
                property var propertyProvider: provider
                property var globalPropertyProvider: inheritStackProvider
                property var externalResetHandler: false

                //Qt5.4.2 and earlier has a bug where this causes a crash: https://bugreports.qt.io/browse/QTBUG-35989
                //In addition, while it works for 5.5 and higher, the ordering of the actual combo box drop down changes,
                //causing nasty issues when selecting different options. So disable asynchronous loading of enum type completely.
                asynchronous: model.type != "enum" && model.type != "extruder" && model.type != "optional_extruder"
                active: model.type != undefined

                source:
                {
                    switch(model.type)
                    {
                        case "int":
                            return "SettingTextField.qml"
                        case "[int]":
                            return "SettingTextField.qml"
                        case "float":
                            return "SettingTextField.qml"
                        case "enum":
                            return "SettingComboBox.qml"
                        case "extruder":
                            return "SettingExtruder.qml"
                        case "bool":
                            return "SettingCheckBox.qml"
                        case "str":
                            return "SettingTextField.qml"
                        case "category":
                            return "SettingCategory.qml"
                        case "optional_extruder":
                            return "SettingOptionalExtruder.qml"
                        default:
                            return "SettingUnknown.qml"
                    }
                }

                // Binding to ensure that the right containerstack ID is set for the provider.
                // This ensures that if a setting has a limit_to_extruder id (for instance; Support speed points to the
                // extruder that actually prints the support, as that is the setting we need to use to calculate the value)
                Binding
                {
                    target: provider
                    property: "containerStackId"
                    when: model.settable_per_extruder || (inheritStackProvider.properties.limit_to_extruder != null && inheritStackProvider.properties.limit_to_extruder >= 0);
                    value:
                    {
                        // associate this binding with Cura.MachineManager.activeMachineId in the beginning so this
                        // binding will be triggered when activeMachineId is changed too.
                        // Otherwise, if this value only depends on the extruderIds, it won't get updated when the
                        // machine gets changed.
                        var activeMachineId = Cura.MachineManager.activeMachineId;

                        if(!model.settable_per_extruder)
                        {
                            //Not settable per extruder or there only is global, so we must pick global.
                            return activeMachineId;
                        }
                        if(inheritStackProvider.properties.limit_to_extruder != null && inheritStackProvider.properties.limit_to_extruder >= 0)
                        {
                            //We have limit_to_extruder, so pick that stack.
                            return Cura.ExtruderManager.extruderIds[String(inheritStackProvider.properties.limit_to_extruder)];
                        }
                        if(Cura.ExtruderManager.activeExtruderStackId)
                        {
                            //We're on an extruder tab. Pick the current extruder.
                            return Cura.ExtruderManager.activeExtruderStackId;
                        }
                        //No extruder tab is selected. Pick the global stack. Shouldn't happen any more since we removed the global tab.
                        return activeMachineId;
                    }
                }

                // Specialty provider that only watches global_inherits (we cant filter on what property changed we get events
                // so we bypass that to make a dedicated provider).
                UM.SettingPropertyProvider
                {
                    id: inheritStackProvider
                    containerStackId: Cura.MachineManager.activeMachineId
                    key: model.key
                    watchedProperties: [ "limit_to_extruder" ]
                }

                UM.SettingPropertyProvider
                {
                    id: provider

                    containerStackId: Cura.MachineManager.activeMachineId
                    key: model.key ? model.key : ""
                    watchedProperties: [ "value", "enabled", "state", "validationState", "settable_per_extruder", "resolve" ]
                    storeIndex: 0
                    removeUnusedValue: model.resolve == undefined
                }

                Connections
                {
                    target: item
                    onContextMenuRequested:
                    {
                        contextMenu.key = model.key;
                        contextMenu.settingVisible = model.visible;
                        contextMenu.provider = provider
                        contextMenu.popup();
                    }
                    onShowTooltip: base.showTooltip(delegate, { x: -UM.Theme.getSize("default_arrow").width, y: Math.round(delegate.height / 2) }, text)
                    onHideTooltip: base.hideTooltip()
                    onShowAllHiddenInheritedSettings:
                    {
                        var children_with_override = Cura.SettingInheritanceManager.getChildrenKeysWithOverride(category_id)
                        for(var i = 0; i < children_with_override.length; i++)
                        {
                            definitionsModel.setVisible(children_with_override[i], true)
                        }
                        Cura.SettingInheritanceManager.manualRemoveOverride(category_id)
                    }
                    onFocusReceived:
                    {
                        contents.indexWithFocus = index;
                        animateContentY.from = contents.contentY;
                        contents.positionViewAtIndex(index, ListView.Contain);
                        animateContentY.to = contents.contentY;
                        animateContentY.running = true;
                    }
                    onSetActiveFocusToNextSetting:
                    {
                        if(forward == undefined || forward)
                        {
                            contents.currentIndex = contents.indexWithFocus + 1;
                            while(contents.currentItem && contents.currentItem.height <= 0)
                            {
                                contents.currentIndex++;
                            }
                            if(contents.currentItem)
                            {
                                contents.currentItem.item.focusItem.forceActiveFocus();
                            }
                        }
                        else
                        {
                            contents.currentIndex = contents.indexWithFocus - 1;
                            while(contents.currentItem && contents.currentItem.height <= 0)
                            {
                                contents.currentIndex--;
                            }
                            if(contents.currentItem)
                            {
                                contents.currentItem.item.focusItem.forceActiveFocus();
                            }
                        }
                    }
                }
            }

            UM.I18nCatalog { id: catalog; name: "cura"; }

            NumberAnimation {
                id: animateContentY
                target: contents
                property: "contentY"
                duration: 50
            }

            add: Transition {
                SequentialAnimation {
                    NumberAnimation { properties: "height"; from: 0; duration: 100 }
                    NumberAnimation { properties: "opacity"; from: 0; duration: 100 }
                }
            }
            remove: Transition {
                SequentialAnimation {
                    NumberAnimation { properties: "opacity"; to: 0; duration: 100 }
                    NumberAnimation { properties: "height"; to: 0; duration: 100 }
                }
            }
            addDisplaced: Transition {
                NumberAnimation { properties: "x,y"; duration: 100 }
            }
            removeDisplaced: Transition {
                SequentialAnimation {
                    PauseAnimation { duration: 100; }
                    NumberAnimation { properties: "x,y"; duration: 100 }
                }
            }

            Menu
            {
                id: contextMenu

                property string key
                property var provider
                property bool settingVisible

                MenuItem
                {
                    //: Settings context menu action
                    text: catalog.i18nc("@action:menu", "Copy value to all extruders")
                    visible: machineExtruderCount.properties.value > 1
                    enabled: contextMenu.provider != undefined && contextMenu.provider.properties.settable_per_extruder != "False"
                    onTriggered: Cura.MachineManager.copyValueToExtruders(contextMenu.key)
                }

                MenuItem
                {
                    //: Settings context menu action
                    text: catalog.i18nc("@action:menu", "Copy all changed values to all extruders")
                    visible: machineExtruderCount.properties.value > 1
                    enabled: contextMenu.provider != undefined
                    onTriggered: Cura.MachineManager.copyAllValuesToExtruders()
                }

                MenuSeparator
                {
                    visible: machineExtruderCount.properties.value > 1
                }

                Instantiator
                {
                    id: customMenuItems
                    model: Cura.SidebarCustomMenuItemsModel { }
                    MenuItem
                    {
                        text: model.name
                        iconName: model.icon_name
                        onTriggered:
                        {
                            customMenuItems.model.callMenuItemMethod(name, model.actions, {"key": contextMenu.key})
                        }
                    }
                   onObjectAdded: contextMenu.insertItem(index, object)
                   onObjectRemoved: contextMenu.removeItem(object)
                }

                MenuSeparator
                {
                    visible: customMenuItems.count > 0
                }

                MenuItem
                {
                    //: Settings context menu action
                    visible: !findingSettings
                    text: catalog.i18nc("@action:menu", "Hide this setting");
                    onTriggered:
                    {
                        definitionsModel.hide(contextMenu.key);
                        // visible settings have changed, so we're no longer showing a preset
                        if (settingVisibilityPresetsModel.activePreset != "")
                        {
                            settingVisibilityPresetsModel.setActivePreset("custom");
                        }
                    }
                }
                MenuItem
                {
                    //: Settings context menu action
                    text:
                    {
                        if (contextMenu.settingVisible)
                        {
                            return catalog.i18nc("@action:menu", "Don't show this setting");
                        }
                        else
                        {
                            return catalog.i18nc("@action:menu", "Keep this setting visible");
                        }
                    }
                    visible: findingSettings
                    onTriggered:
                    {
                        if (contextMenu.settingVisible)
                        {
                            definitionsModel.hide(contextMenu.key);
                        }
                        else
                        {
                            definitionsModel.show(contextMenu.key);
                        }
                        // visible settings have changed, so we're no longer showing a preset
                        if (settingVisibilityPresetsModel.activePreset != "")
                        {
                            settingVisibilityPresetsModel.setActivePreset("custom");
                        }
                    }
                }
                MenuItem
                {
                    //: Settings context menu action
                    text: catalog.i18nc("@action:menu", "Configure setting visibility...");

                    onTriggered: Cura.Actions.configureSettingVisibility.trigger(contextMenu);
                }
                MenuSeparator {}
                MenuItem
                {
                    text: catalog.i18nc("@action:inmenu", "Collapse All")
                    onTriggered: definitionsModel.collapseAll()
                }
                MenuItem
                {
                    text: catalog.i18nc("@action:inmenu", "Expand All")
                    onTriggered: definitionsModel.expandRecursive()
                }
            }

            UM.SettingPropertyProvider
            {
                id: machineExtruderCount

                containerStackId: Cura.MachineManager.activeMachineId
                key: "machine_extruder_count"
                watchedProperties: [ "value" ]
                storeIndex: 0
            }
        }
    }
}