[general] definition = gmax15plus_dual name = gMax 1.5+ Dual Very Thick Layers version = 4 [metadata] global_quality = True quality_type = extra_course setting_version = 23 type = quality weight = -3 [values] acceleration_enabled = True acceleration_print = 400 acceleration_travel = 700 adhesion_type = skirt bottom_layers = 2 coasting_enable = False coasting_volume = 0.0625 cool_fan_speed = 70 cool_fan_speed_max = 85 infill_before_walls = False infill_overlap = 20 infill_pattern = grid layer_height = 0.32 material_flow = 98 material_standby_temperature = =material_print_temperature - 10 ooze_shield_angle = 20 ooze_shield_dist = 4 ooze_shield_enabled = True prime_tower_enable = False retraction_amount = 0.75 retraction_combing = off retraction_speed = 70 skin_overlap = 10 skirt_gap = 2 speed_infill = =math.ceil(speed_print * 0.85) speed_layer_0 = =math.ceil(speed_print * 0.45) speed_print = 40 speed_slowdown_layers = 1 speed_topbottom = =math.ceil(speed_print * 0.75) speed_wall = =math.ceil(speed_print * 0.5) speed_wall_x = =math.ceil(speed_print * 0.7) support_interface_enable = True support_interface_pattern = lines support_join_distance = 10 support_use_towers = False support_xy_distance = 1.5 support_z_distance = 0.2 switch_extruder_retraction_amount = 6 switch_extruder_retraction_speeds = 60 top_bottom_pattern = lines top_layers = 3 top_thickness = 1 wall_line_count = 2 z_seam_corner = z_seam_corner_none