[general]
definition = ultimaker_s5
name = Fast
version = 4

[metadata]
material = generic_cpe
quality_type = draft
setting_version = 21
type = quality
variant = AA 0.4
weight = -2

[values]
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
material_print_temperature = =default_material_print_temperature + 10
retraction_prime_speed = =retraction_speed
skin_overlap = 20
speed_infill = =math.ceil(speed_print * 50 / 60)
speed_print = 60
speed_topbottom = =math.ceil(speed_print * 35 / 60)
speed_wall = =math.ceil(speed_print * 45 / 60)
speed_wall_0 = =math.ceil(speed_wall * 35 / 45)