[general]
version = 2
name = Verydraft Print
definition = ultimaker3

[metadata]
type = quality
quality_type = verydraft
material = generic_pla_ultimaker3_AA_0.8
weight = 1

[values]
brim_line_count = =math.ceil(brim_width / skirt_brim_line_width)
cool_fan_speed_max = =cool_fan_speed
cool_min_speed = 2
gradual_infill_step_height = =3 * layer_height
gradual_infill_steps = 4
infill_line_width = =round(line_width * 0.535 / 0.75, 2)
infill_sparse_density = 80
layer_height = 0.3
line_width = =machine_nozzle_size * 0.9375
machine_nozzle_heat_up_speed = 1.6
material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
material_print_temperature = =default_material_print_temperature + 10
material_standby_temperature = 100
ooze_shield_angle = 60
raft_acceleration = =acceleration_print
raft_jerk = =jerk_print
raft_margin = 15
switch_extruder_prime_speed = =switch_extruder_retraction_speeds
top_bottom_thickness = =layer_height * 4
wall_line_width = =round(line_width * 0.75 / 0.75, 2)
wall_thickness = =wall_line_width_0 + wall_line_width_x