# Cura # Copyright (C) 2021 Ultimaker B.V. # This file is distributed under the same license as the Cura package. # msgid "" msgstr "" "Project-Id-Version: Cura 4.13\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2022-04-13 10:49+0200\n" "PO-Revision-Date: 2020-03-24 09:36+0100\n" "Last-Translator: Nagy Attila \n" "Language-Team: ATI-SZOFT\n" "Language: hu_HU\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Poedit 2.2.4\n" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12 msgctxt "@item:inmenu" msgid "Prepare" msgstr "Előkészítés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura Profile" msgstr "Cura Profil" #: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15 msgctxt "@item:inlistbox 'Open' is part of the name of this file format." msgid "Open Compressed Triangle Mesh" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19 msgctxt "@item:inlistbox" msgid "COLLADA Digital Asset Exchange" msgstr "COLLADA digitális eszközcsere" #: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23 msgctxt "@item:inlistbox" msgid "glTF Binary" msgstr "glTF Bináris" #: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27 msgctxt "@item:inlistbox" msgid "glTF Embedded JSON" msgstr "glTF beágyazott JSON" #: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36 msgctxt "@item:inlistbox" msgid "Stanford Triangle Format" msgstr "Stanford háromszög formátum" #: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40 msgctxt "@item:inlistbox" msgid "Compressed COLLADA Digital Asset Exchange" msgstr "Tömörített COLLADA digitális eszközcsere" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127 msgctxt "@info" msgid "Could not access update information." msgstr "Nem sikerült elérni a frissítési információkat." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17 #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s stable firmware available" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28 msgctxt "@action:button" msgid "How to update" msgstr "Hogyan frissíts" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14 msgctxt "@item:inmenu" msgid "Monitor" msgstr "Monitor" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." msgid "Save to Removable Drive" msgstr "Mentés külső meghajtóra" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24 #, python-brace-format msgctxt "@item:inlistbox" msgid "Save to Removable Drive {0}" msgstr "Mentés külső meghajtóra {0}" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118 msgctxt "@info:status" msgid "There are no file formats available to write with!" msgstr "Nincsenek elérhető fájlformátumok az íráshoz!" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97 #, python-brace-format msgctxt "@info:progress Don't translate the XML tags !" msgid "Saving to Removable Drive {0}" msgstr "Mentés külső meghajóra {0}" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98 msgctxt "@info:title" msgid "Saving" msgstr "Mentés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108 #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" msgstr "Sikertelen mentés {0}: {1}" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." msgstr "Nem található a fájlnév {device} -on az írási művelethez." #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159 #, python-brace-format msgctxt "@info:status" msgid "Could not save to removable drive {0}: {1}" msgstr "Sikertelen mentés a {0}: {1} meghajtóra." #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141 #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161 #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166 msgctxt "@info:title" msgid "Error" msgstr "Hiba" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150 #, python-brace-format msgctxt "@info:status" msgid "Saved to Removable Drive {0} as {1}" msgstr "Mentve a {0} meghajtóra, mint {1}" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151 msgctxt "@info:title" msgid "File Saved" msgstr "Fájl Mentve" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 msgctxt "@action:button" msgid "Eject" msgstr "Leválaszt" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 #, python-brace-format msgctxt "@action" msgid "Eject removable device {0}" msgstr "{0} meghajtó leválasztása" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172 #, python-brace-format msgctxt "@info:status" msgid "Ejected {0}. You can now safely remove the drive." msgstr "{0} leválasztva. Eltávolíthatod az adathordozót." #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173 msgctxt "@info:title" msgid "Safely Remove Hardware" msgstr "Hardver biztonságos eltávolítása" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176 #, python-brace-format msgctxt "@info:status" msgid "Failed to eject {0}. Another program may be using the drive." msgstr "{0} leválasztása sikertelen. A meghajtó használatban van." #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177 #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770 #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217 msgctxt "@info:title" msgid "Warning" msgstr "Figyelem" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76 msgctxt "@item:intext" msgid "Removable Drive" msgstr "Cserélhető meghajtó" #: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15 msgctxt "@item:inlistbox" msgid "AMF File" msgstr "AMF fájl" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28 msgctxt "@item:inlistbox" msgid "Ultimaker Format Package" msgstr "Ultimaker formátumcsomag" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14 msgctxt "@label" msgid "Per Model Settings" msgstr "Modellenkénti beállítások" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15 msgctxt "@info:tooltip" msgid "Configure Per Model Settings" msgstr "Modellenkénti beállítások konfigurálása" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27 msgctxt "@action" msgid "Update Firmware" msgstr "Firmware frissítés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24 #, python-brace-format msgctxt "@info:status" msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}." msgstr "A Cura olyan anyagprofilt észlel, amelyet még nem telepítettek a(z) {0} csoport gazdanyomtatójára." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26 msgctxt "@info:title" msgid "Sending materials to printer" msgstr "Anyagok küldése a nyomtatóra" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27 #, python-brace-format msgctxt "@info:status" msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host." msgstr "Megpróbált csatlakozni a (z) {0} -hez, de a gép nem része a csoportnak.Látogasson el a weboldalra, és konfigurálhatja azt csoporttagnak." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30 msgctxt "@info:title" msgid "Not a group host" msgstr "Nem csoport" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36 msgctxt "@action" msgid "Configure group" msgstr "Csoport konfiguráció" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15 msgctxt "@info:status" msgid "Sending Print Job" msgstr "Nyomtatási feladat küldése" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16 msgctxt "@info:status" msgid "Uploading print job to printer." msgstr "A nyomtatási feladat feltöltése a nyomtatóra." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16 msgctxt "@info:status" msgid "Print job queue is full. The printer can't accept a new job." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17 msgctxt "@info:title" msgid "Queue Full" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15 msgctxt "@info:status" msgid "Please wait until the current job has been sent." msgstr "Várja meg, amíg az aktuális feladat elküldésre kerül." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16 msgctxt "@info:title" msgid "Print error" msgstr "Nyomtatási hiba" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15 msgctxt "@info:status" msgid "Print job was successfully sent to the printer." msgstr "A nyomtatási feladat sikeresen elküldésre került a nyomtatóra." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16 msgctxt "@info:title" msgid "Data Sent" msgstr "Adatok elküldve" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25 #, python-brace-format msgctxt "@info:status" msgid "" "Your printer {printer_name} could be connected via cloud.\n" " Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26 msgctxt "@info:title" msgid "Are you ready for cloud printing?" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30 msgctxt "@action" msgid "Get started" msgstr "Kezdjük el" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31 msgctxt "@action" msgid "Learn more" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18 msgctxt "@info:status" msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware." msgstr "Olyan nyomtatóval próbál csatlakozni, amelyen nem fut az Ultimaker Connect. Kérjük, frissítse a nyomtatón a firmware-t." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21 msgctxt "@info:title" msgid "Update your printer" msgstr "Frissítse a nyomtatót" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15 msgctxt "@info:text" msgid "Could not upload the data to the printer." msgstr "Nem sikerült feltölteni az adatokat a nyomtatóra." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16 msgctxt "@info:title" msgid "Network error" msgstr "Hálózati hiba" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58 msgctxt "@action:button Preceded by 'Ready to'." msgid "Print over network" msgstr "Hálózati nyomtatás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59 msgctxt "@properties:tooltip" msgid "Print over network" msgstr "Hálózati nyomtatás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60 msgctxt "@info:status" msgid "Connected over the network" msgstr "Csatlakozva hálózaton keresztül" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27 msgctxt "@info:status" msgid "tomorrow" msgstr "holnap" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30 msgctxt "@info:status" msgid "today" msgstr "ma" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28 msgctxt "@action" msgid "Connect via Network" msgstr "Hálózati csatlakozás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229 msgctxt "info:status" msgid "New printer detected from your Ultimaker account" msgid_plural "New printers detected from your Ultimaker account" msgstr[0] "" msgstr[1] "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240 #, python-brace-format msgctxt "info:status Filled in with printer name and printer model." msgid "Adding printer {name} ({model}) from your account" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257 #, python-brace-format msgctxt "info:{0} gets replaced by a number of printers" msgid "... and {0} other" msgid_plural "... and {0} others" msgstr[0] "" msgstr[1] "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262 msgctxt "info:status" msgid "Printers added from Digital Factory:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328 msgctxt "info:status" msgid "A cloud connection is not available for a printer" msgid_plural "A cloud connection is not available for some printers" msgstr[0] "" msgstr[1] "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337 msgctxt "info:status" msgid "This printer is not linked to the Digital Factory:" msgid_plural "These printers are not linked to the Digital Factory:" msgstr[0] "" msgstr[1] "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432 msgctxt "info:name" msgid "Ultimaker Digital Factory" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346 #, python-brace-format msgctxt "info:status" msgid "To establish a connection, please visit the {website_link}" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350 msgctxt "@action:button" msgid "Keep printer configurations" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355 msgctxt "@action:button" msgid "Remove printers" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "{printer_name} will be removed until the next account sync." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "To remove {printer_name} permanently, visit {digital_factory_link}" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "Are you sure you want to remove {printer_name} temporarily?" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473 msgctxt "@title:window" msgid "Remove printers?" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476 #, python-brace-format msgctxt "@label" msgid "" "You are about to remove {0} printer from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgid_plural "" "You are about to remove {0} printers from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgstr[0] "" msgstr[1] "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481 msgctxt "@label" msgid "" "You are about to remove all printers from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154 msgctxt "@action:button" msgid "Print via cloud" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155 msgctxt "@properties:tooltip" msgid "Print via cloud" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156 msgctxt "@info:status" msgid "Connected via cloud" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261 msgctxt "@action:button" msgid "Monitor print" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263 msgctxt "@action:tooltip" msgid "Track the print in Ultimaker Digital Factory" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279 #, python-brace-format msgctxt "@error:send" msgid "Unknown error code when uploading print job: {0}" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31 msgctxt "@info:title" msgid "3D Model Assistant" msgstr "3D-s modellsegéd" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97 #, python-brace-format msgctxt "@info:status" msgid "" "

One or more 3D models may not print optimally due to the model size and material configuration:

\n" "

{model_names}

\n" "

Find out how to ensure the best possible print quality and reliability.

\n" "

View print quality guide

" msgstr "" "

Lehetséges, hogy egy vagy több 3D-s modellt nem lehet optimálisan kinyomtatni a modell mérete és az anyagkonfiguráció miatt:

\n" "

{model_names}

\n" "

Itt Megtudhatja, hogyan lehet a lehető legjobb nyomtatási minőséget és megbízhatóságot biztosítani.

\n" "

View print quality guide

" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129 msgctxt "@info:status" msgid "Cura does not accurately display layers when Wire Printing is enabled." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130 msgctxt "@info:title" msgid "Simulation View" msgstr "Szimuláció nézet" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133 msgctxt "@info:status" msgid "Nothing is shown because you need to slice first." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134 msgctxt "@info:title" msgid "No layers to show" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136 #: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74 msgctxt "@info:option_text" msgid "Do not show this message again" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15 msgctxt "@item:inlistbox" msgid "Layer view" msgstr "Réteg nézet" #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74 msgctxt "@error:not supported" msgid "GCodeWriter does not support non-text mode." msgstr "A GCodeWriter nem támogatja a szöveges nélüli módot." #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80 #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96 msgctxt "@warning:status" msgid "Please prepare G-code before exporting." msgstr "Készítse elő a G-kódot az exportálás előtt." #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16 #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14 #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "G-code File" msgstr "G-code Fájl" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226 msgctxt "@error:zip" msgid "Error writing 3mf file." msgstr "Hiba a 3mf fájl írásakor." #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31 msgctxt "@error:zip" msgid "3MF Writer plug-in is corrupt." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37 msgctxt "@error" msgid "There is no workspace yet to write. Please add a printer first." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64 #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97 msgctxt "@error:zip" msgid "No permission to write the workspace here." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101 msgctxt "@error:zip" msgid "The operating system does not allow saving a project file to this location or with this file name." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26 msgctxt "@item:inlistbox" msgid "3MF file" msgstr "3MF fájl" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34 msgctxt "@item:inlistbox" msgid "Cura Project 3MF file" msgstr "Cura projekt 3MF fájl" #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17 #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17 msgctxt "@item:inlistbox" msgid "Compressed G-code File" msgstr "Tömörített G-kód fájl" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161 msgctxt "@message" msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162 msgctxt "@message:title" msgid "Slicing failed" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167 msgctxt "@message:button" msgid "Report a bug" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168 msgctxt "@message:description" msgid "Report a bug on Ultimaker Cura's issue tracker." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." msgstr "Nem lehet szeletelni a jelenlegi alapanyaggal, mert nem kompatibilis a kiválasztott nyomtatóval, vagy a beállításaival." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493 msgctxt "@info:title" msgid "Unable to slice" msgstr "Nem lehet szeletelni" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428 #, python-brace-format msgctxt "@info:status" msgid "Unable to slice with the current settings. The following settings have errors: {0}" msgstr "Nem lehet szeletelni ezekkel a beállításokkal. Ezek a beállítások okoznak hibát: {0}" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455 #, python-brace-format msgctxt "@info:status" msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}" msgstr "Nem lehet szeletelni pár modell beállítás miatt. A következő beállításokokoznak hibát egy vagy több modellnél: {error_labels}" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467 msgctxt "@info:status" msgid "Unable to slice because the prime tower or prime position(s) are invalid." msgstr "Nem lehet szeletelni, mert az elsődleges torony, vagy az elsődleges pozíció érvénytelen." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479 #, python-format msgctxt "@info:status" msgid "Unable to slice because there are objects associated with disabled Extruder %s." msgstr "Nem lehet szeletelni, mert vannak olyan objektumok, amelyek a letiltott Extruderhez vannak társítva.%s." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489 msgctxt "@info:status" msgid "" "Please review settings and check if your models:\n" "- Fit within the build volume\n" "- Are assigned to an enabled extruder\n" "- Are not all set as modifier meshes" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 msgctxt "@info:status" msgid "Processing Layers" msgstr "Réteg feldolgozás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261 msgctxt "@info:title" msgid "Information" msgstr "Információ" #: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13 msgctxt "@item:inlistbox" msgid "X3D File" msgstr "X3D Fájl" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "JPG Image" msgstr "JPG kép" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18 msgctxt "@item:inlistbox" msgid "JPEG Image" msgstr "JPEG kép" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22 msgctxt "@item:inlistbox" msgid "PNG Image" msgstr "PNG kép" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26 msgctxt "@item:inlistbox" msgid "BMP Image" msgstr "BMP kép" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30 msgctxt "@item:inlistbox" msgid "GIF Image" msgstr "GIF kép" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713 msgctxt "@label" msgid "Nozzle" msgstr "Fúvóka" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Project file {0} contains an unknown machine type {1}. Cannot import the machine. Models will be imported instead." msgstr "A projekt fájl {0} egy ismeretlen {1} géptípust tartalmaz.Gépet nem lehet importálni. Importálj helyette modelleket." #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547 msgctxt "@info:title" msgid "Open Project File" msgstr "Projekt fájl megnyitása" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644 #, python-brace-format msgctxt "@info:error Don't translate the XML tags or !" msgid "Project file {0} is suddenly inaccessible: {1}." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645 #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653 msgctxt "@info:title" msgid "Can't Open Project File" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652 #, python-brace-format msgctxt "@info:error Don't translate the XML tags or !" msgid "Project file {0} is corrupt: {1}." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705 #, python-brace-format msgctxt "@info:error Don't translate the XML tag !" msgid "Project file {0} is made using profiles that are unknown to this version of Ultimaker Cura." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203 msgctxt "@title:tab" msgid "Recommended" msgstr "Ajánlott" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205 msgctxt "@title:tab" msgid "Custom" msgstr "Egyedi" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27 #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33 msgctxt "@item:inlistbox" msgid "3MF File" msgstr "3MF fájl" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159 msgctxt "@info:error" msgid "Can't write to UFP file:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura 15.04 profiles" msgstr "Cura 15.04 profil" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25 msgctxt "@info:title" msgid "Backups" msgstr "Biztonsági mentések" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26 msgctxt "@info:backup_status" msgid "There was an error while uploading your backup." msgstr "Hiba történt a biztonsági mentés feltöltése közben." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46 msgctxt "@info:backup_status" msgid "Creating your backup..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55 msgctxt "@info:backup_status" msgid "There was an error while creating your backup." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59 msgctxt "@info:backup_status" msgid "Uploading your backup..." msgstr "A biztonsági mentés feltöltése ..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69 msgctxt "@info:backup_status" msgid "Your backup has finished uploading." msgstr "A biztonsági mentés feltöltése befejeződött." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103 msgctxt "@error:file_size" msgid "The backup exceeds the maximum file size." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69 msgctxt "@item:inmenu" msgid "Manage backups" msgstr "Bitonsági mentések kezelése" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126 #: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122 #: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159 msgctxt "@info:title" msgid "Backup" msgstr "Biztonsági mentés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 msgctxt "@info:backup_status" msgid "There was an error trying to restore your backup." msgstr "Hiba történt a biztonsági másolat visszaállításakor." #: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95 msgctxt "@text" msgid "Unable to read example data file." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43 msgctxt "@error:not supported" msgid "GCodeGzWriter does not support text mode." msgstr "A GCodeGzWriter nem támogatja a nem szöveges módot." #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35 msgctxt "@item:inmenu" msgid "Post Processing" msgstr "Utólagos műveletek" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36 msgctxt "@item:inmenu" msgid "Modify G-Code" msgstr "G-kód módosítás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12 msgctxt "@label" msgid "Support Blocker" msgstr "Támasz blokkoló" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13 msgctxt "@info:tooltip" msgid "Create a volume in which supports are not printed." msgstr "Hozzon létre egy kötetet, amelyben a támaszok nem kerülnek nyomtatásra." #: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13 msgctxt "@item:inmenu" msgid "Preview" msgstr "Előnézet" #: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12 msgctxt "@item:inlistbox" msgid "X-Ray view" msgstr "Röntgen nézet" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24 msgctxt "@action" msgid "Level build plate" msgstr "Tárgyasztal szint" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21 msgctxt "@action" msgid "Select upgrades" msgstr "Válassz frissítést" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43 msgctxt "@label:property" msgid "Unknown Package" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66 msgctxt "@label:property" msgid "Unknown Author" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116 msgctxt "@info:error" msgid "Could not interpret the server's response." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146 msgctxt "@info:error" msgid "Could not reach Marketplace." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28 msgctxt "@label" msgid "Installed Plugins" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29 msgctxt "@label" msgid "Installed Materials" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33 msgctxt "@label" msgid "Bundled Plugins" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34 msgctxt "@label" msgid "Bundled Materials" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71 msgctxt "@info:status" msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73 msgctxt "@info:title" msgid "Model Errors" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71 #: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82 msgctxt "@action:button" msgid "Learn more" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12 msgctxt "@item:inmenu" msgid "Solid view" msgstr "Felület nézet" #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350 msgctxt "@info:status" msgid "Parsing G-code" msgstr "G-kód elemzés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352 #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506 msgctxt "@info:title" msgid "G-code Details" msgstr "G-kód részletek" #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504 msgctxt "@info:generic" msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate." msgstr "Győződj meg róla, hogy a G-kód igazodik a nyomtatódhoz és beállításaihoz, mielőtt elküldöd a fájlt. A G-kód ábrázolása nem biztos, hogy pontos." #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18 msgctxt "@item:inlistbox" msgid "G File" msgstr "G fájl" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32 msgctxt "@action" msgid "Machine Settings" msgstr "Gép beállítások" #: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42 msgctxt "@item:inmenu" msgid "USB printing" msgstr "USB nyomtatás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43 msgctxt "@action:button Preceded by 'Ready to'." msgid "Print via USB" msgstr "Nyomtatás USB-ről" #: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44 msgctxt "@info:tooltip" msgid "Print via USB" msgstr "Nyomtatás USB-ről" #: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80 msgctxt "@info:status" msgid "Connected via USB" msgstr "Csatlakozás USB-n" #: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110 msgctxt "@label" msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?" msgstr "USB nyomtatás folyamatban van, a Cura bezárása leállítja ezt a nyomtatást. Biztos vagy ebben?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135 msgctxt "@message" msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed." msgstr "A nyomtatás még folyamatban van. A Cura nem indíthat új nyomtatást USB-n keresztül, amíg az előző nyomtatás be nem fejeződött." #: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136 msgctxt "@message" msgid "Print in Progress" msgstr "Nyomtatás folyamatban" #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529 msgctxt "@info:progress" msgid "Loading machines..." msgstr "Gépek betöltése ..." #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536 msgctxt "@info:progress" msgid "Setting up preferences..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678 msgctxt "@info:progress" msgid "Initializing Active Machine..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802 msgctxt "@info:progress" msgid "Initializing machine manager..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816 msgctxt "@info:progress" msgid "Initializing build volume..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884 msgctxt "@info:progress" msgid "Setting up scene..." msgstr "Felület beállítása..." #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920 msgctxt "@info:progress" msgid "Loading interface..." msgstr "Interfészek betöltése..." #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925 msgctxt "@info:progress" msgid "Initializing engine..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242 #, python-format msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm." msgid "%(width).1f x %(depth).1f x %(height).1f mm" msgstr "%(width).1f x %(depth).1f x %(height).1f mm" #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768 #, python-brace-format msgctxt "@info:status" msgid "Only one G-code file can be loaded at a time. Skipped importing {0}" msgstr "Egyszerre csak egy G-kód fájlt lehet betölteni. Az importálás kihagyva {0}" #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780 #, python-brace-format msgctxt "@info:status" msgid "Can't open any other file if G-code is loading. Skipped importing {0}" msgstr "Nem nyitható meg más fájl, ha a G-kód betöltődik. Az importálás kihagyva {0}" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11 msgctxt "@label" msgid "Default" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14 msgctxt "@label" msgid "Visual" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15 msgctxt "@text" msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18 msgctxt "@label" msgid "Engineering" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19 msgctxt "@text" msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22 msgctxt "@label" msgid "Draft" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23 msgctxt "@text" msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219 msgctxt "@menuitem" msgid "Not overridden" msgstr "Nincs felülírva" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143 #, python-brace-format msgctxt "@label {0} is the name of a printer that's about to be deleted." msgid "Are you sure you wish to remove {0}? This cannot be undone!" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614 msgctxt "@label" msgid "Unknown" msgstr "Ismeretlen" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113 msgctxt "@label" msgid "The printer(s) below cannot be connected because they are part of a group" msgstr "Az alábbi nyomtató (k) nem csatlakoztathatók, mert egy csoporthoz tartoznak" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115 msgctxt "@label" msgid "Available networked printers" msgstr "Elérhető hálózati nyomtatók" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182 msgctxt "@info:status" msgid "Calculated" msgstr "Számított" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55 #: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66 msgctxt "@action:button" msgid "Please sync the material profiles with your printers before starting to print." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56 #: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67 msgctxt "@action:button" msgid "New materials installed" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63 #: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74 msgctxt "@action:button" msgid "Sync materials" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288 msgctxt "@label" msgid "Custom Material" msgstr "Egyedi anyag" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336 msgctxt "@label" msgid "Custom" msgstr "Egyedi" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390 msgctxt "@label" msgid "Custom profiles" msgstr "Egyéni profil" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425 #, python-brace-format msgctxt "@item:inlistbox" msgid "All Supported Types ({0})" msgstr "Összes támasz típus ({0})" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426 msgctxt "@item:inlistbox" msgid "All Files (*)" msgstr "Minden fájl (*)" #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104 msgctxt "@text:error" msgid "Failed to create archive of materials to sync with printers." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111 #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165 msgctxt "@text:error" msgid "Failed to load the archive of materials to sync it with printers." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143 msgctxt "@text:error" msgid "The response from Digital Factory appears to be corrupted." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147 #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151 #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155 msgctxt "@text:error" msgid "The response from Digital Factory is missing important information." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218 msgctxt "@text:error" msgid "Failed to connect to Digital Factory to sync materials with some of the printers." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232 msgctxt "@text:error" msgid "Failed to connect to Digital Factory." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115 msgctxt "@info:backup_failed" msgid "Could not create archive from user data directory: {}" msgstr "Nem sikerült archívumot létrehozni a felhasználói adatkönyvtárból: {}" #: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134 msgctxt "@info:backup_failed" msgid "Tried to restore a Cura backup without having proper data or meta data." msgstr "Megpróbált visszaállítani egy Cura biztonsági másolatot anélkül, hogy megfelelő adatok vagy meta adatok lennének." #: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145 msgctxt "@info:backup_failed" msgid "Tried to restore a Cura backup that is higher than the current version." msgstr "Egy olyan Cura biztonsági mentést próbált visszaállítani, amelyiknek a verziója magasabb a jelenlegitől." #: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158 msgctxt "@info:backup_failed" msgid "The following error occurred while trying to restore a Cura backup:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24 msgctxt "@info:status" msgid "Finding new location for objects" msgstr "Új hely keresése az objektumokhoz" #: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28 msgctxt "@info:title" msgid "Finding Location" msgstr "Hely keresés" #: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41 #: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99 msgctxt "@info:status" msgid "Unable to find a location within the build volume for all objects" msgstr "Nincs elég hely az összes objektum építési térfogatához" #: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42 msgctxt "@info:title" msgid "Can't Find Location" msgstr "Nem találok helyet" #: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190 msgctxt "@info:title" msgid "Login failed" msgstr "Sikertelen bejelentkezés" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85 msgctxt "@tooltip" msgid "Outer Wall" msgstr "Külső fal" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86 msgctxt "@tooltip" msgid "Inner Walls" msgstr "Belső falak" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87 msgctxt "@tooltip" msgid "Skin" msgstr "Héj" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88 msgctxt "@tooltip" msgid "Infill" msgstr "Kitöltés" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89 msgctxt "@tooltip" msgid "Support Infill" msgstr "Támasz kitöltés" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90 msgctxt "@tooltip" msgid "Support Interface" msgstr "Támasz interface" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91 msgctxt "@tooltip" msgid "Support" msgstr "Támasz" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92 msgctxt "@tooltip" msgid "Skirt" msgstr "Szoknya" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93 msgctxt "@tooltip" msgid "Prime Tower" msgstr "Elsődleges torony" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94 msgctxt "@tooltip" msgid "Travel" msgstr "Átmozgás" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95 msgctxt "@tooltip" msgid "Retractions" msgstr "Visszahúzás" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96 msgctxt "@tooltip" msgid "Other" msgstr "Egyéb" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69 #, python-brace-format msgctxt "@label" msgid "Group #{group_nr}" msgstr "Csoport #{group_nr}" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37 #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63 msgctxt "@text:window" msgid "The release notes could not be opened." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67 #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286 msgctxt "@action:button" msgid "Skip" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72 #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135 #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178 #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172 msgctxt "@action:button" msgid "Close" msgstr "Bezár" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61 msgctxt "@action:button" msgid "Add" msgstr "Hozzáad" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26 #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290 msgctxt "@action:button" msgid "Finish" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43 #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323 #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451 #: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136 msgctxt "@action:button" msgid "Cancel" msgstr "Elvet" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57 #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277 msgctxt "@action:button" msgid "Next" msgstr "Következő" #: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100 msgctxt "@info:status" msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models." msgstr "Az nyomtatási szint csökken a \"Nyomtatási sorrend\" beállítása miatt, ez megakadályozza, hogy a mechanika beleütközzön a nyomtatott tárgyba." #: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103 msgctxt "@info:title" msgid "Build Volume" msgstr "Építési térfogat" #: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135 msgctxt "@message:text" msgid "Could not save material archive to {}:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136 msgctxt "@message:title" msgid "Failed to save material archive" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188 msgctxt "@text" msgid "Unknown error." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140 msgctxt "@title:window" msgid "File Already Exists" msgstr "A fájl már létezik" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141 #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" msgstr "A {0} fájl már létezik. Biztosan szeretnéd, hogy felülírjuk?" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462 msgctxt "@info:status" msgid "Invalid file URL:" msgstr "Érvénytelen fájl URL:" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36 msgctxt "@info:not supported profile" msgid "Not supported" msgstr "Nem támogatott" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55 msgctxt "@info:No intent profile selected" msgid "Default" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857 msgctxt "@info:message Followed by a list of settings." msgid "Settings have been changed to match the current availability of extruders:" msgstr "A beállításokat megváltoztattuk, hogy azok megfeleljenek az jelenleg elérhető extrudereknek:" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858 msgctxt "@info:title" msgid "Settings updated" msgstr "Beállítások frissítve" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480 msgctxt "@info:title" msgid "Extruder(s) Disabled" msgstr "Extruder(ek) kikapcsolva" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to export profile to {0}: {1}" msgstr "A profil exportálása nem sikerült {0}: {1}" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to export profile to {0}: Writer plugin reported failure." msgstr "A profil exportálása nem sikerült {0}:Az író beépülő modul hibát jelez." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Exported profile to {0}" msgstr "Profil exportálva ide: {0}" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173 msgctxt "@info:title" msgid "Export succeeded" msgstr "Sikeres export" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}: {1}" msgstr "Sikertelen profil importálás {0}: {1} -ból" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Can't import profile from {0} before a printer is added." msgstr "Nem importálható a profil {0} -ból, mielőtt hozzá nem adunk egy nyomtatót." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "No custom profile to import in file {0}" msgstr "Nincs egyéni profil a {0} fájlban, amelyet importálni lehetne" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}:" msgstr "A profil importálása nem sikerült {0}:" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "This profile {0} contains incorrect data, could not import it." msgstr "Ez a {0} profil helytelen adatokat tartamaz, ezért nem importálható." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to import profile from {0}:" msgstr "Nem importálható a profil {0}:" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359 #, python-brace-format msgctxt "@info:status" msgid "Successfully imported profile {0}." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366 #, python-brace-format msgctxt "@info:status" msgid "File {0} does not contain any valid profile." msgstr "A {0} fájl nem tartalmaz érvényes profilt." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369 #, python-brace-format msgctxt "@info:status" msgid "Profile {0} has an unknown file type or is corrupted." msgstr "A(z) {0} profil ismeretlen fájltípusú vagy sérült." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443 msgctxt "@label" msgid "Custom profile" msgstr "Egyedi profil" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459 msgctxt "@info:status" msgid "Profile is missing a quality type." msgstr "Hiányzik a profil minőségi típusa." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463 msgctxt "@info:status" msgid "There is no active printer yet." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469 msgctxt "@info:status" msgid "Unable to add the profile." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483 #, python-brace-format msgctxt "@info:status" msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488 #, python-brace-format msgctxt "@info:status" msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30 msgctxt "@info:status" msgid "Multiplying and placing objects" msgstr "Tárgyak többszörözése és elhelyezése" #: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32 msgctxt "@info:title" msgid "Placing Objects" msgstr "Tárgyak elhelyezése" #: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100 msgctxt "@info:title" msgid "Placing Object" msgstr "Tárgy elhelyezése" #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216 msgctxt "@info" msgid "Unable to start a new sign in process. Check if another sign in attempt is still active." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277 msgctxt "@info" msgid "Unable to reach the Ultimaker account server." msgstr "Az Ultimaker fiókkiszolgáló elérhetetlen." #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278 msgctxt "@info:title" msgid "Log-in failed" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89 msgctxt "@message" msgid "Could not read response." msgstr "Nincs olvasható válasz." #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75 msgctxt "@message" msgid "The provided state is not correct." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Kérjük, adja meg a szükséges jogosultságokat az alkalmazás engedélyezéséhez." #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Valami váratlan esemény történt a bejelentkezéskor, próbálkozzon újra." #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107 msgctxt "@title:window" msgid "Cura can't start" msgstr "A Cura nem tud elindulni" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113 msgctxt "@label crash message" msgid "" "

Oops, Ultimaker Cura has encountered something that doesn't seem right.

\n" "

We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.

\n" "

Backups can be found in the configuration folder.

\n" "

Please send us this Crash Report to fix the problem.

\n" " " msgstr "" "

Hoppá, az Ultimaker Cura olyan dolgokkal találkozott, amelyek hibásnak tűnnek.

\n" "

Az indítás során helyrehozhatatlan hibát tapasztaltunkEzt valószínűleg néhány helytelen konfigurációs fájl okozta. Javasoljuk, hogy biztonsági másolatból állítsa vissza a konfigurációt.

\n" "

A biztonsági mentések a konfigurációs mappában találhatók.

\n" "

Kérjük, küldje el nekünk ezt a hibajelentést a probléma megoldásához.

\n" " " #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122 msgctxt "@action:button" msgid "Send crash report to Ultimaker" msgstr "Hibajelentés küldése az Ultimaker -nek" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125 msgctxt "@action:button" msgid "Show detailed crash report" msgstr "Hibajelentés részletei" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129 msgctxt "@action:button" msgid "Show configuration folder" msgstr "Konfigurációs mappa megnyitása" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140 msgctxt "@action:button" msgid "Backup and Reset Configuration" msgstr "Konfiguráció biztonsági mentés és visszaállítás" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171 msgctxt "@title:window" msgid "Crash Report" msgstr "Összeomlás jelentés" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190 msgctxt "@label crash message" msgid "" "

A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem

\n" "

Please use the \"Send report\" button to post a bug report automatically to our servers

\n" " " msgstr "" "

Végzetes hiba történt Cura-ban. Kérjük, küld el nekünk az összeomlás jelentését, hogy javítani tudjuk a hibát.

\n" "

Kérjük használd a \"Jelentés küldés\" gombot a hibajelentés postázásához, így az automatikusan a szerverünkre kerül.

\n" " " #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198 msgctxt "@title:groupbox" msgid "System information" msgstr "Rendszer információ" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207 msgctxt "@label unknown version of Cura" msgid "Unknown" msgstr "Ismeretlen" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228 msgctxt "@label Cura version number" msgid "Cura version" msgstr "Cura verzió" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229 msgctxt "@label" msgid "Cura language" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230 msgctxt "@label" msgid "OS language" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231 msgctxt "@label Type of platform" msgid "Platform" msgstr "Felület" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232 msgctxt "@label" msgid "Qt version" msgstr "Qt verzió" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233 msgctxt "@label" msgid "PyQt version" msgstr "PyQt verzió" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234 msgctxt "@label OpenGL version" msgid "OpenGL" msgstr "OpenGL" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264 msgctxt "@label" msgid "Not yet initialized
" msgstr "Még nincs inicializálva
" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267 #, python-brace-format msgctxt "@label OpenGL version" msgid "
  • OpenGL Version: {version}
    • " msgstr "
  • OpenGL Verzió: {version}
    • " #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268 #, python-brace-format msgctxt "@label OpenGL vendor" msgid "
  • OpenGL Vendor: {vendor}
    • " msgstr "
  • OpenGL terjesztő: {vendor}
    • " #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269 #, python-brace-format msgctxt "@label OpenGL renderer" msgid "
  • OpenGL Renderer: {renderer}
    • " msgstr "
  • OpenGL Renderer: {renderer}
    • " #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303 msgctxt "@title:groupbox" msgid "Error traceback" msgstr "Hibakövetés" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389 msgctxt "@title:groupbox" msgid "Logs" msgstr "Naplók" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417 msgctxt "@action:button" msgid "Send report" msgstr "Jelentés küldés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100 msgctxt "@info" msgid "" "Please make sure your printer has a connection:\n" "- Check if the printer is turned on.\n" "- Check if the printer is connected to the network.\n" "- Check if you are signed in to discover cloud-connected printers." msgstr "" "Győződj meg, hogy a nyomtató csatlakozása rendben van:\n" "- Ellenőrizd, hogy a nyomtató be van-e kapcsolva.\n" "- Ellenőrizd, hogy a nyomtató csatlakozik a hálózathoz\n" "- Ellenőrizd, hogy fel vagy-e jelentkezve a felhőbe." #: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113 msgctxt "@info" msgid "Please connect your printer to the network." msgstr "Csatlakoztasd a nyomtatót a hálózathoz." #: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146 msgctxt "@label link to technical assistance" msgid "View user manuals online" msgstr "Nézd meg az online felhasználói kézikönyvet" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163 msgctxt "@info" msgid "In order to monitor your print from Cura, please connect the printer." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17 msgctxt "@title:window" msgid "Select Settings to Customize for this model" msgstr "A modellek egyéni beállításainak kiválasztása" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100 msgctxt "@label:textbox" msgid "Filter..." msgstr "Szűrés..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75 msgctxt "@label:checkbox" msgid "Show all" msgstr "Mindent mutat" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41 msgctxt "@label" msgid "Mesh Type" msgstr "Háló típus" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81 msgctxt "@label" msgid "Normal model" msgstr "Normál mód" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96 msgctxt "@label" msgid "Print as support" msgstr "Támaszként nyomtassa" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111 msgctxt "@label" msgid "Modify settings for overlaps" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126 msgctxt "@label" msgid "Don't support overlaps" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159 msgctxt "@item:inlistbox" msgid "Infill mesh only" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160 msgctxt "@item:inlistbox" msgid "Cutting mesh" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385 msgctxt "@action:button" msgid "Select settings" msgstr "Beállítások kiválasztása" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31 msgctxt "@title" msgid "Update Firmware" msgstr "Firmware frissítés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37 msgctxt "@label" msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work." msgstr "A firmware egy szoftver, ami közvetlenül a nyomtatón fut. Ez vezérli a léptető motorokat, szabályozza a hőmérsékleteket, és az egész nyomtató működését." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43 msgctxt "@label" msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements." msgstr "A firmware a nyomtató része, így a használatba vételkor már a gépen található.Azonban készülnek belőle újabb verziók, amik esetleges hibákat szüntetnek meg, illetve egyéb új funkciókat biztosíthatnak." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55 msgctxt "@action:button" msgid "Automatically upgrade Firmware" msgstr "Automatikus firmware frissítés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66 msgctxt "@action:button" msgid "Upload custom Firmware" msgstr "Egyedi firmware feltöltése" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79 msgctxt "@label" msgid "Firmware can not be updated because there is no connection with the printer." msgstr "A firmware feltöltés nem lehetséges, mert nincs a nyomtatóval kapcsolat." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86 msgctxt "@label" msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware." msgstr "A firmware feltöltés nem lehetséges, mert ugyan a nyomtató kapcsolódik, de az nem támogatja a firmware frissítést." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93 msgctxt "@title:window" msgid "Select custom firmware" msgstr "Egyedi firmware kiválasztása" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114 msgctxt "@title:window" msgid "Firmware Update" msgstr "Firmware frissítés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138 msgctxt "@label" msgid "Updating firmware." msgstr "A firmware frissítése." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140 msgctxt "@label" msgid "Firmware update completed." msgstr "Firmware frissítés kész." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142 msgctxt "@label" msgid "Firmware update failed due to an unknown error." msgstr "A firmware frissítés meghiúsult ismeretlen hiba miatt." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144 msgctxt "@label" msgid "Firmware update failed due to an communication error." msgstr "A firmware frissítés meghiúsult kommunikációs hiba miatt." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146 msgctxt "@label" msgid "Firmware update failed due to an input/output error." msgstr "A firmware frissítés meghiúsult input/output hiba miatt." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148 msgctxt "@label" msgid "Firmware update failed due to missing firmware." msgstr "A firmware frissítés meghiúsult, mert nem található a firmware." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 msgctxt "@label:status" msgid "Aborted" msgstr "Megszakítva" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74 msgctxt "@label:status" msgid "Finished" msgstr "Befejezve" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351 msgctxt "@label:status" msgid "Preparing..." msgstr "Előkészítés..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 msgctxt "@label:status" msgid "Aborting..." msgstr "Megszakítás..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 msgctxt "@label:status" msgid "Failed" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98 msgctxt "@label:status" msgid "Pausing..." msgstr "Várakozás..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100 msgctxt "@label:status" msgid "Paused" msgstr "Várakozás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102 msgctxt "@label:status" msgid "Resuming..." msgstr "Folytatás..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104 msgctxt "@label:status" msgid "Action required" msgstr "Beavatkozás szükséges" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106 msgctxt "@label:status" msgid "Finishes %1 at %2" msgstr "Befejezve %1 a %2 -ből" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148 msgctxt "@label link to Connect and Cloud interfaces" msgid "Manage printer" msgstr "Nyomtató kezelés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175 msgctxt "@label" msgid "Glass" msgstr "Üveg" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239 msgctxt "@info" msgid "Please update your printer's firmware to manage the queue remotely." msgstr "A távoli nyomtatásisor kezeléshez kérjük frissítse a firmware-t." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275 msgctxt "@info" msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335 msgctxt "@label:status" msgid "Loading..." msgstr "Betöltés..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339 msgctxt "@label:status" msgid "Unavailable" msgstr "Elérhetetlen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343 msgctxt "@label:status" msgid "Unreachable" msgstr "Elérhetetlen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347 msgctxt "@label:status" msgid "Idle" msgstr "Készenlét" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356 msgctxt "@label:status" msgid "Printing" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397 msgctxt "@label" msgid "Untitled" msgstr "Felirat nélküli" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412 msgctxt "@label" msgid "Anonymous" msgstr "Névtelen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433 msgctxt "@label:status" msgid "Requires configuration changes" msgstr "A konfiguráció változtatásokat igényel" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447 msgctxt "@action:button" msgid "Details" msgstr "Részletek" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20 msgctxt "@title:window" msgid "Configuration Changes" msgstr "Konfiguráció változások" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36 msgctxt "@action:button" msgid "Override" msgstr "Felülírás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83 msgctxt "@label" msgid "The assigned printer, %1, requires the following configuration change:" msgid_plural "The assigned printer, %1, requires the following configuration changes:" msgstr[0] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatás szükséges:" msgstr[1] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatások szükségesek:" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87 msgctxt "@label" msgid "The printer %1 is assigned, but the job contains an unknown material configuration." msgstr "A %1 nyomtató hozzá van rendelve a feladathoz, azonban az ismeretlen anyagot tartalmaz." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97 msgctxt "@label" msgid "Change material %1 from %2 to %3." msgstr "Változtasd meg az %1 anyagot %2 -ről %3 -ra." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100 msgctxt "@label" msgid "Load %3 as material %1 (This cannot be overridden)." msgstr "Töltsd be %3 -at %1 anyagként. (Ez nem felülbírálható)." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103 msgctxt "@label" msgid "Change print core %1 from %2 to %3." msgstr "Cseréld a nyomtató magot %1 -ről %2 -re, %3 -hoz." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106 msgctxt "@label" msgid "Change build plate to %1 (This cannot be overridden)." msgstr "Változtasd meg a tálcát %1 -re (Ez nem felülbírálható)." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113 msgctxt "@label" msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print." msgstr "A felülbírálás a megadott beállításokat fogja használni a meglévő nyomtató konfigurációval, azonban ez eredménytelen nyomtatáshoz vezethet." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154 msgctxt "@label" msgid "Aluminum" msgstr "Alumínium" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12 msgctxt "@title:window" msgid "Print over network" msgstr "Nyomtatás hálózaton" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53 msgctxt "@action:button" msgid "Print" msgstr "Nyomtatás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81 msgctxt "@label" msgid "Printer selection" msgstr "Nyomtató kiválasztás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44 msgctxt "@title:window" msgid "Connect to Networked Printer" msgstr "Csatlakozás hálózati nyomtatóhoz" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51 msgctxt "@label" msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer." msgstr "Ha hálózaton keresztül szeretnél közvetlenül nyomtatni, akkor győződj meg arról, hogy a nyomtató csatlakozik vezetékes, vagy vezeték nélküli hálózathoz. Ha nincs elérhető hálózat, akkor közvetlenül USB kapcsolaton keresztül is tudsz nyomtatni." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51 msgctxt "@label" msgid "Select your printer from the list below:" msgstr "Válaszd ki a nyomtatódat az alábbi listából:" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71 msgctxt "@action:button" msgid "Edit" msgstr "Szerkeszt" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320 msgctxt "@action:button" msgid "Remove" msgstr "Eltávolít" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90 msgctxt "@action:button" msgid "Refresh" msgstr "Frissít" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161 msgctxt "@label" msgid "If your printer is not listed, read the network printing troubleshooting guide" msgstr "Ha a nyomtatód nincs a listában, olvasd el a hálózati nyomtatás hibaelhárítási útmutatót" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263 msgctxt "@label" msgid "Type" msgstr "Típus" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279 msgctxt "@label" msgid "Firmware version" msgstr "Frimware verzió" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295 msgctxt "@label" msgid "Address" msgstr "Cím" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232 msgctxt "@label" msgid "This printer is not set up to host a group of printers." msgstr "Ez a nyomtató nem úgy van beállítva, hogy nyomtatócsoportot üzemeltessen." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236 msgctxt "@label" msgid "This printer is the host for a group of %1 printers." msgstr "Ez a nyomtató gazdagépe a %1 nyomtatócsoportnak." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245 msgctxt "@label" msgid "The printer at this address has not yet responded." msgstr "A címen található nyomtató még nem válaszolt." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250 msgctxt "@action:button" msgid "Connect" msgstr "Csatlakozás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261 msgctxt "@title:window" msgid "Invalid IP address" msgstr "Hibás IP cím" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146 msgctxt "@text" msgid "Please enter a valid IP address." msgstr "Kérlek adj meg egy érvényes IP címet." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272 msgctxt "@title:window" msgid "Printer Address" msgstr "Nyomtató cím" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102 msgctxt "@label" msgid "Enter the IP address of your printer on the network." msgstr "Írd be a nyomtató hálózati IP címét." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126 msgctxt "@label" msgid "Unavailable printer" msgstr "Elérhetetlen nyomtató" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128 msgctxt "@label" msgid "First available" msgstr "Az első elérhető" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54 msgctxt "@label" msgid "Move to top" msgstr "Lépj a tetjére" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70 msgctxt "@label" msgid "Delete" msgstr "Törlés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284 msgctxt "@label" msgid "Resume" msgstr "Folytat" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102 msgctxt "@label" msgid "Pausing..." msgstr "Várakozás..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104 msgctxt "@label" msgid "Resuming..." msgstr "Folytatás..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288 msgctxt "@label" msgid "Pause" msgstr "Várakozás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 msgctxt "@label" msgid "Aborting..." msgstr "Megszakítás..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 msgctxt "@label" msgid "Abort" msgstr "Megszakít" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to move %1 to the top of the queue?" msgstr "Biztos, hogy a %1 a nyomtatási sor elejére akarod mozgatni?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143 msgctxt "@window:title" msgid "Move print job to top" msgstr "Tedd a nyomtatási sor elejére" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to delete %1?" msgstr "Biztos, hogy törölni szeretnéd %1?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152 msgctxt "@window:title" msgid "Delete print job" msgstr "Nyomtatási feladat törlés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to abort %1?" msgstr "Biztosan meg akarod szakítani %1?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326 msgctxt "@window:title" msgid "Abort print" msgstr "Nyomtatás megszakítás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29 msgctxt "@label" msgid "Queued" msgstr "Nyomtatási Sor" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63 msgctxt "@label link to connect manager" msgid "Manage in browser" msgstr "Kezelés a böngészőben" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90 msgctxt "@label" msgid "There are no print jobs in the queue. Slice and send a job to add one." msgstr "Nincs a sorban nyomtatási feladat. Szeletelj és adj hozzá egy feladatot." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98 msgctxt "@label" msgid "Print jobs" msgstr "Nyomtatások" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107 msgctxt "@label" msgid "Total print time" msgstr "Teljes nyomtatási idő" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116 msgctxt "@label" msgid "Waiting for" msgstr "Várakozom" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19 #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48 msgctxt "@label" msgid "Color scheme" msgstr "Szín séma" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105 msgctxt "@label:listbox" msgid "Material Color" msgstr "Alapanyag szín" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109 msgctxt "@label:listbox" msgid "Line Type" msgstr "Vonal típus" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113 msgctxt "@label:listbox" msgid "Speed" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117 msgctxt "@label:listbox" msgid "Layer Thickness" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121 msgctxt "@label:listbox" msgid "Line Width" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125 msgctxt "@label:listbox" msgid "Flow" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165 msgctxt "@label" msgid "Compatibility Mode" msgstr "Kompatibilis mód" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232 msgctxt "@label" msgid "Travels" msgstr "Átmozgás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238 msgctxt "@label" msgid "Helpers" msgstr "Segítők" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244 msgctxt "@label" msgid "Shell" msgstr "Héj" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64 msgctxt "@label" msgid "Infill" msgstr "Kitöltés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258 msgctxt "@label" msgid "Starts" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307 msgctxt "@label" msgid "Only Show Top Layers" msgstr "Csak a felső rétegek megjelenítése" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316 msgctxt "@label" msgid "Show 5 Detailed Layers On Top" msgstr "Mutasson 5 felső réteget részletesen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329 msgctxt "@label" msgid "Top / Bottom" msgstr "Felső / Alsó" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333 msgctxt "@label" msgid "Inner Wall" msgstr "Belső fal" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400 msgctxt "@label" msgid "min" msgstr "min" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465 msgctxt "@label" msgid "max" msgstr "max" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14 msgctxt "@title:window" msgid "Convert Image" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33 msgctxt "@action:label" msgid "Height (mm)" msgstr "Magasság (mm)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56 msgctxt "@info:tooltip" msgid "The maximum distance of each pixel from \"Base.\"" msgstr "Az egyes pixelek legnagyobb távolsága \"Base.\"" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66 msgctxt "@action:label" msgid "Base (mm)" msgstr "Alap (mm)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90 msgctxt "@info:tooltip" msgid "The base height from the build plate in millimeters." msgstr "Az alap magassága a tárgyasztaltól mm -ben." #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100 msgctxt "@action:label" msgid "Width (mm)" msgstr "Szélesség (mm)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124 msgctxt "@info:tooltip" msgid "The width in millimeters on the build plate" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134 msgctxt "@action:label" msgid "Depth (mm)" msgstr "Mélység (mm)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158 msgctxt "@info:tooltip" msgid "The depth in millimeters on the build plate" msgstr "A mélység mm-ben a tárgyasztalon" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187 msgctxt "@item:inlistbox" msgid "Darker is higher" msgstr "A sötétebb a magasabb" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188 msgctxt "@item:inlistbox" msgid "Lighter is higher" msgstr "A világosabb a magasabb" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195 msgctxt "@info:tooltip" msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model." msgstr "A litofánok esetében a sötét képpontoknak a vastagabb helyek felelnek meg.Ez azért van így, mert minél vastagabb a hely, annál kevesebb fényt enged át.A magassági térképeknél a világosabb képpontok magasabb szintnek felelnek meg, tehát a generált 3D modellnél ezeket figyelembe kell venni.Ez azt is jelenti, hogy általában a generált modell a tényleges kép negatívja kell, hogy legyen." #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205 msgctxt "@action:label" msgid "Color Model" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224 msgctxt "@item:inlistbox" msgid "Linear" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225 msgctxt "@item:inlistbox" msgid "Translucency" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232 msgctxt "@info:tooltip" msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242 msgctxt "@action:label" msgid "1mm Transmittance (%)" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263 msgctxt "@info:tooltip" msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274 msgctxt "@action:label" msgid "Smoothing" msgstr "Simítás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298 msgctxt "@info:tooltip" msgid "The amount of smoothing to apply to the image." msgstr "A kép simításának mértéke." #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329 #: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140 msgctxt "@action:button" msgid "OK" msgstr "OK" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15 msgctxt "@title:window" msgid "Open Project" msgstr "Projekt megnyitása" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55 msgctxt "@action:ComboBox Update/override existing profile" msgid "Update existing" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56 msgctxt "@action:ComboBox Save settings in a new profile" msgid "Create new" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52 msgctxt "@action:title" msgid "Summary - Cura Project" msgstr "Összegzés - Cura Project" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100 msgctxt "@info:tooltip" msgid "How should the conflict in the machine be resolved?" msgstr "Hogyan lehet megoldani a gépet érintő konfliktust?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88 msgctxt "@action:label" msgid "Printer settings" msgstr "Nyomtató beállítások" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97 msgctxt "@action:label" msgid "Type" msgstr "Típus" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112 msgctxt "@action:label" msgid "Printer Group" msgstr "Nyomtató csoport" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209 msgctxt "@info:tooltip" msgid "How should the conflict in the profile be resolved?" msgstr "Hogyan lehet megoldani a profilt érintő konfliktust?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213 msgctxt "@action:label" msgid "Profile settings" msgstr "Profil beállítások" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237 msgctxt "@action:label" msgid "Name" msgstr "Név" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254 msgctxt "@action:label" msgid "Intent" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221 msgctxt "@action:label" msgid "Not in profile" msgstr "Nincs a profilban" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226 msgctxt "@action:label" msgid "%1 override" msgid_plural "%1 overrides" msgstr[0] "%1 felülírás" msgstr[1] "%1 felülírás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297 msgctxt "@action:label" msgid "Derivative from" msgstr "Származék" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303 msgctxt "@action:label" msgid "%1, %2 override" msgid_plural "%1, %2 overrides" msgstr[0] "%1, %2 felülírás" msgstr[1] "%1, %2 felülírás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325 msgctxt "@info:tooltip" msgid "How should the conflict in the material be resolved?" msgstr "Hogyan lehet megoldani az alapanyaggal kapcsolatos konfliktust?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352 msgctxt "@action:label" msgid "Material settings" msgstr "Alapanyag beállítások" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388 msgctxt "@action:label" msgid "Setting visibility" msgstr "Beállítások láthatósága" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397 msgctxt "@action:label" msgid "Mode" msgstr "Mód" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413 msgctxt "@action:label" msgid "Visible settings:" msgstr "Látható beállítások:" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418 msgctxt "@action:label" msgid "%1 out of %2" msgstr "%1 %2 -ből" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439 msgctxt "@action:warning" msgid "Loading a project will clear all models on the build plate." msgstr "A projekt betöltésekor minden modell törlődik a tárgyasztalról." #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456 msgctxt "@action:button" msgid "Open" msgstr "Megnyitás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22 msgctxt "@button" msgid "Want more?" msgstr "Többet szeretnél?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31 msgctxt "@button" msgid "Backup Now" msgstr "Biztonsági mentés most" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43 msgctxt "@checkbox:description" msgid "Auto Backup" msgstr "Automatikus biztonsági mentés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44 msgctxt "@checkbox:description" msgid "Automatically create a backup each day that Cura is started." msgstr "Automatikusan létrehoz egy biztonsági mentést minden egyes nap, mikor a Cura indítva van." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21 msgctxt "@backuplist:label" msgid "Cura Version" msgstr "Cura verzió" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29 msgctxt "@backuplist:label" msgid "Machines" msgstr "Gépek" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37 msgctxt "@backuplist:label" msgid "Materials" msgstr "Alapanyagok" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45 msgctxt "@backuplist:label" msgid "Profiles" msgstr "Profilok" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53 msgctxt "@backuplist:label" msgid "Plugins" msgstr "Beépülők" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64 msgctxt "@button" msgid "Restore" msgstr "Visszaállítás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93 msgctxt "@dialog:title" msgid "Delete Backup" msgstr "Biztonsági mentés törlés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94 msgctxt "@dialog:info" msgid "Are you sure you want to delete this backup? This cannot be undone." msgstr "Biztosan szeretnéd törölni a biztonsági mentést? Ez nem vonható vissza." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102 msgctxt "@dialog:title" msgid "Restore Backup" msgstr "Helyreállítás biztonsági mentésből" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103 msgctxt "@dialog:info" msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?" msgstr "A biztonsági mentés helyreállítás előtt a Cura -t újra kell indítani.Bezárjuk most a Cura-t?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34 msgctxt "@description" msgid "Backup and synchronize your Cura settings." msgstr "A Cura beállítások biztonsági mentése és szinkronizálása." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225 msgctxt "@button" msgid "Sign in" msgstr "Bejelentkezés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28 msgctxt "@title" msgid "My Backups" msgstr "Biztonsági mentéseim" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38 msgctxt "@empty_state" msgid "You don't have any backups currently. Use the 'Backup Now' button to create one." msgstr "Nincs egyetlen biztonsági mentésed sem. Használd a 'Biztonsági mentés' gombot, hogy létrehozz egyet." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60 msgctxt "@backup_limit_info" msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones." msgstr "Az előnézeti szakaszban a látható biztonsági mentések száma 5 lehet.Ha szeretné látni a régebbieket, távolítson el egyet a láthatóak közül." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25 msgctxt "@title:window" msgid "Cura Backups" msgstr "Cura biztonsági mentések" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17 msgctxt "@title:window" msgid "More information on anonymous data collection" msgstr "További információ a névtelen adatgyűjtésről" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74 msgctxt "@text:window" msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:" msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javítása érdekében. Az alábbiakban található egy példa az összes megosztott adatra:" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110 msgctxt "@text:window" msgid "I don't want to send anonymous data" msgstr "Nem szeretnék részt venni az adatgyűjtésben" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119 msgctxt "@text:window" msgid "Allow sending anonymous data" msgstr "Anonim adatok küldésének engedélyezése" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17 msgctxt "@title:window" msgid "Post Processing Plugin" msgstr "Utó művelet beépülő" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57 msgctxt "@label" msgid "Post Processing Scripts" msgstr "Utó művelet szkript" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221 msgctxt "@action" msgid "Add a script" msgstr "Adjon hozzá egy szkriptet" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257 msgctxt "@label" msgid "Settings" msgstr "Beállítások" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466 msgctxt "@info:tooltip" msgid "Change active post-processing scripts." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470 msgctxt "@info:tooltip" msgid "The following script is active:" msgid_plural "The following scripts are active:" msgstr[0] "" msgstr[1] "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30 msgctxt "@label" msgid "Please select any upgrades made to this Ultimaker Original" msgstr "Kérjük, válassza ki az Ultimaker Original eredeti frissítéseit" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41 msgctxt "@label" msgid "Heated Build Plate (official kit or self-built)" msgstr "Fűthető tárgyasztal (eredeti vagy utólag épített)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30 msgctxt "@title" msgid "Build Plate Leveling" msgstr "Tálca szintezés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44 msgctxt "@label" msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted." msgstr "Azért, hogy nyomtattandó testek megfelelően letapadjanak, lehetőség van beállítani a nyomtatótálcát. Ha rákattint a 'Mozgás a következő pozícióba' gombra, a fej átmozgatható a különböző beállítási helyzetekbe." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57 msgctxt "@label" msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle." msgstr "Minden helyzetben helyezzen be egy darab papírt (A4) a fúvóka alá, és állítsa be a fej magasságát.A nyomtató tálca magassága akkor megfelelő, ha a papírt kissé megfogja a fúvóka vége." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75 msgctxt "@action:button" msgid "Start Build Plate Leveling" msgstr "Tálca szintezés indítása" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87 msgctxt "@action:button" msgid "Move to Next Position" msgstr "Mozgás a következő pozícióba" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21 msgctxt "@info" msgid "Ultimaker Verified Plug-in" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22 msgctxt "@info" msgid "Ultimaker Certified Material" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23 msgctxt "@info" msgid "Ultimaker Verified Package" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84 msgctxt "@title" msgid "Loading..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143 msgctxt "@button" msgid "Plugins" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151 msgctxt "@button" msgid "Materials" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188 msgctxt "@info" msgid "Search in the browser" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266 msgctxt "@button" msgid "In order to use the package you will need to restart Cura" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274 msgctxt "@info:button, %1 is the application name" msgid "Quit %1" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165 msgctxt "@label" msgid "By" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199 msgctxt "@button" msgid "Enable" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199 msgctxt "@button" msgid "Disable" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217 msgctxt "@button" msgid "Downgrading..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218 msgctxt "@button" msgid "Downgrade" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222 msgctxt "@button" msgid "Installing..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223 msgctxt "@button" msgid "Install" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227 msgctxt "@button" msgid "Uninstall" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242 msgctxt "@button" msgid "Updating..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242 msgctxt "@button" msgid "Update" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8 msgctxt "@header" msgid "Install Plugins" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12 msgctxt "@text" msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32 msgctxt "@info:tooltip" msgid "Manage packages" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85 msgctxt "@header" msgid "Description" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117 msgctxt "@header" msgid "Compatible printers" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143 msgctxt "@info" msgid "No compatibility information" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162 msgctxt "@header" msgid "Compatible support materials" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188 msgctxt "@info No materials" msgid "None" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206 msgctxt "@header" msgid "Compatible with Material Station" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216 #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244 msgctxt "@info" msgid "Yes" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216 #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244 msgctxt "@info" msgid "No" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234 msgctxt "@header" msgid "Optimized for Air Manager" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260 msgctxt "@button" msgid "Visit plug-in website" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260 msgctxt "@button" msgid "Website" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269 msgctxt "@button" msgid "Buy spool" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278 msgctxt "@button" msgid "Safety datasheet" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287 msgctxt "@button" msgid "Technical datasheet" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15 msgctxt "@header" msgid "Package details" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40 msgctxt "@button:tooltip" msgid "Back" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16 msgctxt "@button" msgid "Plugin license agreement" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48 msgctxt "@text" msgid "Please read and agree with the plugin licence." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74 msgctxt "@button" msgid "Accept" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83 msgctxt "@button" msgid "Decline" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164 msgctxt "@button" msgid "Failed to load packages:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164 msgctxt "@button" msgid "Retry?" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180 msgctxt "@button" msgid "Loading" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196 msgctxt "@message" msgid "No more results to load" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196 msgctxt "@message" msgid "No results found with current filter" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239 msgctxt "@button" msgid "Load more" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11 msgctxt "@header" msgid "Manage packages" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15 msgctxt "@text" msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8 msgctxt "@header" msgid "Install Materials" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12 msgctxt "@text" msgid "Select and install material profiles optimised for your Ultimaker 3D printers." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42 msgctxt "@title:tab" msgid "Printer" msgstr "Nyomtató" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63 msgctxt "@title:label" msgid "Nozzle Settings" msgstr "Fűvóka beállítások" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75 msgctxt "@label" msgid "Nozzle size" msgstr "Fúvóka méret" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 msgctxt "@label" msgid "mm" msgstr "mm" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89 msgctxt "@label" msgid "Compatible material diameter" msgstr "Nyomtatószál átmérő" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105 msgctxt "@label" msgid "Nozzle offset X" msgstr "Fúvóka X eltolás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120 msgctxt "@label" msgid "Nozzle offset Y" msgstr "Fúvóka Y eltolás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135 msgctxt "@label" msgid "Cooling Fan Number" msgstr "Hűtőventilátorok száma" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163 msgctxt "@title:label" msgid "Extruder Start G-code" msgstr "Extruder G-kód kezdés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177 msgctxt "@title:label" msgid "Extruder End G-code" msgstr "Extruder G-kód zárás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56 msgctxt "@title:label" msgid "Printer Settings" msgstr "Nyomtató beállítás" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70 msgctxt "@label" msgid "X (Width)" msgstr "X (Szélesség)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85 msgctxt "@label" msgid "Y (Depth)" msgstr "Y (Mélység)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100 msgctxt "@label" msgid "Z (Height)" msgstr "Z (Magasság)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114 msgctxt "@label" msgid "Build plate shape" msgstr "Tárgyasztal alakja" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127 msgctxt "@label" msgid "Origin at center" msgstr "Origó középen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139 msgctxt "@label" msgid "Heated bed" msgstr "Fűtött asztal" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151 msgctxt "@label" msgid "Heated build volume" msgstr "Fűtött nyomtatási tér" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163 msgctxt "@label" msgid "G-code flavor" msgstr "G-kód illesztés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187 msgctxt "@title:label" msgid "Printhead Settings" msgstr "Nyomtatófej beállítások" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201 msgctxt "@label" msgid "X min" msgstr "X min" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221 msgctxt "@label" msgid "Y min" msgstr "Y min" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241 msgctxt "@label" msgid "X max" msgstr "X max" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261 msgctxt "@label" msgid "Y max" msgstr "Y max" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279 msgctxt "@label" msgid "Gantry Height" msgstr "Szán magasság" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293 msgctxt "@label" msgid "Number of Extruders" msgstr "Extruderek száma" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345 msgctxt "@label" msgid "Apply Extruder offsets to GCode" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393 msgctxt "@title:label" msgid "Start G-code" msgstr "G-kód kezdés" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404 msgctxt "@title:label" msgid "End G-code" msgstr "G-kód zárás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32 msgctxt "@label:button" msgid "My printers" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34 msgctxt "@tooltip:button" msgid "Monitor printers in Ultimaker Digital Factory." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41 msgctxt "@tooltip:button" msgid "Create print projects in Digital Library." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46 msgctxt "@label:button" msgid "Print jobs" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48 msgctxt "@tooltip:button" msgid "Monitor print jobs and reprint from your print history." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55 msgctxt "@tooltip:button" msgid "Extend Ultimaker Cura with plugins and material profiles." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62 msgctxt "@tooltip:button" msgid "Become a 3D printing expert with Ultimaker e-learning." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67 msgctxt "@label:button" msgid "Ultimaker support" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69 msgctxt "@tooltip:button" msgid "Learn how to get started with Ultimaker Cura." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74 msgctxt "@label:button" msgid "Ask a question" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76 msgctxt "@tooltip:button" msgid "Consult the Ultimaker Community." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81 msgctxt "@label:button" msgid "Report a bug" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83 msgctxt "@tooltip:button" msgid "Let developers know that something is going wrong." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90 msgctxt "@tooltip:button" msgid "Visit the Ultimaker website." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16 msgctxt "@label %1 is filled in with the name of an extruder" msgid "Print Selected Model with %1" msgid_plural "Print Selected Models with %1" msgstr[0] "Kiválasztott modell nyomtatása %1" msgstr[1] "Kiválasztott modellek nyomtatása %1" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&Settings" msgstr "&Beállítások" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87 msgctxt "@title:window" msgid "New project" msgstr "Új projekt" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88 msgctxt "@info:question" msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings." msgstr "Biztos benne, hogy új projektet akar kezdeni? Ez törli az alapsíkot és az összes nem mentett beállítást." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135 msgctxt "@action:button" msgid "Marketplace" msgstr "Piactér" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25 msgctxt "@label" msgid "Build plate" msgstr "Tárgyasztal" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55 msgctxt "@tooltip" msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off." msgstr "A fűthető ágy beállítható célhőmérséklete. Ha beállítjuk ezt az értéket a tálca elkezd erre a hőmérsékletre melegedni, vagy éppen lehűlni. Ha az érték 0 a tálcafűtés kikapcsol." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88 msgctxt "@tooltip" msgid "The current temperature of the heated bed." msgstr "A fűthető ágy aktuális hőmérséklete." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the bed to." msgstr "A tálca előmelegítési hőmérséklete." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271 msgctxt "@button Cancel pre-heating" msgid "Cancel" msgstr "Elvet" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274 msgctxt "@button" msgid "Pre-heat" msgstr "Előfűtés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286 msgctxt "@tooltip of pre-heat" msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print." msgstr "A fűthető tálcát, a nyomtatás előtt előre felmelegíti. Ez alatt az idő alatt tudod folytatni a nyomtatás beállítását, esetleg a szeletelést, s mire ezekkel a műveletekkel elkészülsz, a nyomtató már készen fog állni a nyomtatásra.Így nem kell majd várnod a gép felmelegedésére." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56 msgctxt "@info:status" msgid "The printer is not connected." msgstr "A nyomtató nincs csatlakoztatva." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51 msgctxt "@label" msgid "Printer control" msgstr "Nyomtató vezérlés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66 msgctxt "@label" msgid "Jog Position" msgstr "Léptetőgomb pozíció" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82 msgctxt "@label" msgid "X/Y" msgstr "X/Y" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162 msgctxt "@label" msgid "Z" msgstr "Z" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217 msgctxt "@label" msgid "Jog Distance" msgstr "Léptetőgomb távolság" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257 msgctxt "@label" msgid "Send G-code" msgstr "G-kód küldés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319 msgctxt "@tooltip of G-code command input" msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command." msgstr "Küldjön egy egyéni G-kód parancsot a csatlakoztatott nyomtatóra. A parancs elküldéséhez nyomja meg az 'enter' gombot." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40 msgctxt "@label" msgid "Extruder" msgstr "Extruder" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70 msgctxt "@tooltip" msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." msgstr "A nyomtatófej célhőmérséklete. A fűtőblokk hőmérséklete a beállított értékre fog melegedni, vagy éppen hűlni. Ha ez az érték 0, akkor a fejfűtés ki fog kapcsolni." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105 msgctxt "@tooltip" msgid "The current temperature of this hotend." msgstr "Ennek a fejnek a jelenlegi hőmérséklete." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the hotend to." msgstr "A nyomtatófej előmelegítési hőmérséklete." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297 msgctxt "@tooltip of pre-heat" msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print." msgstr "A nyomtatófejet a nyomtatás előtt előre felmelegíti. Ez alatt az idő alatt tudod folytatni a nyomtatás beállítását, esetleg a szeletelést, s mire ezekkel a műveletekkel elkészülsz, a nyomtató már készen fog állni a nyomtatásra.Így nem kell majd várnod a gép felmelegedésére." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335 msgctxt "@tooltip" msgid "The colour of the material in this extruder." msgstr "Az alapanyag színe ennél az extrudernél." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367 msgctxt "@tooltip" msgid "The material in this extruder." msgstr "Az alapanyag ebben az extruderben." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400 msgctxt "@tooltip" msgid "The nozzle inserted in this extruder." msgstr "A fúvóka be van építve az extruderbe." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17 msgctxt "@title:window" msgid "Open project file" msgstr "Projekt fájl megnyitása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83 msgctxt "@text:window" msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?" msgstr "Ez egy Cura projekt fájl. Szeretné projektként megnyitni, vagy importálni a modelleket?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91 msgctxt "@text:window" msgid "Remember my choice" msgstr "Emlékezzen a választásra" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105 msgctxt "@action:button" msgid "Open as project" msgstr "Megnyitás projektként" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110 msgctxt "@action:button" msgid "Import models" msgstr "Modellek importálása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14 msgctxt "@title:window" msgid "Save Project" msgstr "Projekt mentése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168 msgctxt "@action:label" msgid "Extruder %1" msgstr "Extruder %1" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184 msgctxt "@action:label" msgid "%1 & material" msgstr "%1 & alapanyag" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186 msgctxt "@action:label" msgid "Material" msgstr "Alapanyag" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275 msgctxt "@action:label" msgid "Don't show project summary on save again" msgstr "Ne mutassa újra a projekt összegzését mentés közben" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289 msgctxt "@action:button" msgid "Save" msgstr "Mentés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637 msgctxt "@title:window" msgid "Open file(s)" msgstr "Fájl(ok) megnyitása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47 msgctxt "@text:window" msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?" msgstr "Egy vagy több projekt fájlt találtunk a kiválasztott fájlokban.Egyszerre csak egy projekt fájlt nyithat meg. Javasoljuk, hogy csak a modelleket importálja ezekből a fájlokból. Szeretné folytatni?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64 msgctxt "@action:button" msgid "Import all as models" msgstr "Importáljunk mindent modellekként" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15 msgctxt "@title:window The argument is the application name." msgid "About %1" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57 msgctxt "@label" msgid "version: %1" msgstr "verzió: %1" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72 msgctxt "@label" msgid "End-to-end solution for fused filament 3D printing." msgstr "Teljes körű megoldás az olvadószálas 3D-s nyomtatáshoz." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85 msgctxt "@info:credit" msgid "" "Cura is developed by Ultimaker B.V. in cooperation with the community.\n" "Cura proudly uses the following open source projects:" msgstr "A Cura-t az Ultimaker B.V fejlesztette ki a közösséggel együttműködésben. A Cura büszkén használja a következő nyílt forráskódú projekteket:" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134 msgctxt "@label" msgid "Graphical user interface" msgstr "Grafikai felhasználói interfész" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135 msgctxt "@label" msgid "Application framework" msgstr "Alkalmazás keretrendszer" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136 msgctxt "@label" msgid "G-code generator" msgstr "G-kód generátor" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137 msgctxt "@label" msgid "Interprocess communication library" msgstr "Folyamatközi kommunikációs könyvtár" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139 msgctxt "@label" msgid "Programming language" msgstr "Programozási nyelv" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140 msgctxt "@label" msgid "GUI framework" msgstr "GUI keretrendszer" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141 msgctxt "@label" msgid "GUI framework bindings" msgstr "GUI keretrendszer függőségek" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142 msgctxt "@label" msgid "C/C++ Binding library" msgstr "C/C++ függőségek könyvtár" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143 msgctxt "@label" msgid "Data interchange format" msgstr "Adat csere formátum" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144 msgctxt "@label" msgid "Support library for scientific computing" msgstr "Támogató könyvtár a tudományos számítások számára" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145 msgctxt "@label" msgid "Support library for faster math" msgstr "Támogató könyvtár a gyorsabb matematikához" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146 msgctxt "@label" msgid "Support library for handling STL files" msgstr "Támogató könyvtár az STL fájlok kezeléséhez" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147 msgctxt "@label" msgid "Support library for handling triangular meshes" msgstr "Támogató könyvtár a háromszög hálók kezeléséhez" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148 msgctxt "@label" msgid "Support library for handling 3MF files" msgstr "Támogató könyvtár a 3MF fájlok kezeléséhez" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149 msgctxt "@label" msgid "Support library for file metadata and streaming" msgstr "Támogató könyvtár a fájl metaadatokhoz és továbbításához" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150 msgctxt "@label" msgid "Serial communication library" msgstr "Soros kommunikációs könyvtár" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151 msgctxt "@label" msgid "ZeroConf discovery library" msgstr "ZeroConf felderítő könyvtár" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152 msgctxt "@label" msgid "Polygon clipping library" msgstr "Poligon daraboló könyvtár" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153 msgctxt "@label" msgid "Python bindings for Clipper" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154 msgctxt "@Label" msgid "Static type checker for Python" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156 msgctxt "@Label" msgid "Root Certificates for validating SSL trustworthiness" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157 msgctxt "@Label" msgid "Python Error tracking library" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158 msgctxt "@label" msgid "Polygon packing library, developed by Prusa Research" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159 msgctxt "@label" msgid "Python bindings for libnest2d" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160 msgctxt "@label" msgid "Support library for system keyring access" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161 msgctxt "@label" msgid "Python extensions for Microsoft Windows" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162 msgctxt "@label" msgid "Font" msgstr "Betűtípus" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163 msgctxt "@label" msgid "SVG icons" msgstr "SVG ikonok" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164 msgctxt "@label" msgid "Linux cross-distribution application deployment" msgstr "Linux kereszt-disztribúciós alkalmazás telepítése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14 msgctxt "@title:window" msgid "Discard or Keep changes" msgstr "Változtatások megtartása vagy eldobása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50 msgctxt "@text:window, %1 is a profile name" msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76 msgctxt "@title:column" msgid "Profile settings" msgstr "Profil beállítások" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78 msgctxt "@title:column" msgid "Current changes" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798 msgctxt "@option:discardOrKeep" msgid "Always ask me this" msgstr "Mindig kérdezz" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108 msgctxt "@option:discardOrKeep" msgid "Discard and never ask again" msgstr "Eldobás és ne kérdezze újra" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109 msgctxt "@option:discardOrKeep" msgid "Keep and never ask again" msgstr "Megtartás és ne kérdezze újra" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139 msgctxt "@action:button" msgid "Discard changes" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145 msgctxt "@action:button" msgid "Keep changes" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18 msgctxt "@label" msgid "No items to select from" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Open File(s)..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Open &Recent" msgstr "Legutóbbi fájlok" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16 msgctxt "@action:inmenu" msgid "Visible Settings" msgstr "Láthatósági beállítások" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45 msgctxt "@action:inmenu" msgid "Collapse All Categories" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54 msgctxt "@action:inmenu" msgid "Manage Setting Visibility..." msgstr "Beállítások láthatóságának kezelése..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34 msgctxt "@title:menu" msgid "&Material" msgstr "&Alapanyag" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49 msgctxt "@action:inmenu" msgid "Set as Active Extruder" msgstr "Beállítva aktív extruderként" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55 msgctxt "@action:inmenu" msgid "Enable Extruder" msgstr "Extruder engedélyezése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63 msgctxt "@action:inmenu" msgid "Disable Extruder" msgstr "Extruder letiltása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13 msgctxt "@label:category menu label" msgid "Material" msgstr "Alapanyag" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53 msgctxt "@label:category menu label" msgid "Favorites" msgstr "Kedvencek" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78 msgctxt "@label:category menu label" msgid "Generic" msgstr "Generikus" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14 msgctxt "@title:menu menubar:toplevel" msgid "&Help" msgstr "&Segítség" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&File" msgstr "&Fájl" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44 msgctxt "@title:menu menubar:file" msgid "&Save Project..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77 msgctxt "@title:menu menubar:file" msgid "&Export..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88 msgctxt "@action:inmenu menubar:file" msgid "Export Selection..." msgstr "Kiválasztás exportálása..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21 msgctxt "@title:menu menubar:toplevel" msgid "P&references" msgstr "P&referenciák" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12 msgctxt "@title:menu menubar:toplevel" msgid "&Edit" msgstr "S&zerkesztés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13 msgctxt "@title:menu menubar:settings" msgid "&Printer" msgstr "&Nyomtató" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17 msgctxt "@label:category menu label" msgid "Network enabled printers" msgstr "Hálózati nyomtatók" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50 msgctxt "@label:category menu label" msgid "Local printers" msgstr "Helyi nyomtatók" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "E&xtensions" msgstr "K&iterjesztések" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18 msgctxt "@header" msgid "Configurations" msgstr "Konfigurációk" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52 msgctxt "@label" msgid "Loading available configurations from the printer..." msgstr "Az elérhető konfigurációk betöltése a nyomtatóról..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53 msgctxt "@label" msgid "The configurations are not available because the printer is disconnected." msgstr "A konfiguráció nem elérhető, mert nincs kapcsolat a a nyomtatóval." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137 msgctxt "@label" msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile." msgstr "Ez a konfiguráció nem érhető el, mert a(z) %1 nem azonosítható. Kérjük, látogasson el a %2 webhelyre a megfelelő anyagprofil letöltéséhez." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138 msgctxt "@label" msgid "Marketplace" msgstr "Piactér" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101 msgctxt "@tooltip" msgid "The configuration of this extruder is not allowed, and prohibits slicing." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105 msgctxt "@tooltip" msgid "There are no profiles matching the configuration of this extruder." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245 msgctxt "@label" msgid "Select configuration" msgstr "Konfiguráció kiválasztása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354 msgctxt "@label" msgid "Configurations" msgstr "Konfigurációk" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27 msgctxt "@header" msgid "Custom" msgstr "Egyéni" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62 msgctxt "@label" msgid "Printer" msgstr "Nyomtató" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214 msgctxt "@label" msgid "Enabled" msgstr "Bekapcsolt" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263 msgctxt "@label" msgid "Material" msgstr "Alapanyag" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391 msgctxt "@label" msgid "Use glue for better adhesion with this material combination." msgstr "Használj ragasztót a jobb tapadás érdekében, ennél az alapanyag kombinációnál." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29 msgctxt "@label" msgid "Print Selected Model With:" msgid_plural "Print Selected Models With:" msgstr[0] "Kiválasztott modell nyomtatása:" msgstr[1] "Kiválasztott modellek nyomtatása:" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92 msgctxt "@title:window" msgid "Multiply Selected Model" msgid_plural "Multiply Selected Models" msgstr[0] "Kiválasztott modell sokszorozása" msgstr[1] "Kiválasztott modellek sokszorozása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123 msgctxt "@label" msgid "Number of Copies" msgstr "Másolatok száma" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Save Project..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&View" msgstr "&Nézet" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17 msgctxt "@action:inmenu menubar:view" msgid "&Camera position" msgstr "&Kamera helyzet" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30 msgctxt "@action:inmenu menubar:view" msgid "Camera view" msgstr "Kamera nézet" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48 msgctxt "@action:inmenu menubar:view" msgid "Perspective" msgstr "Perspektívikus" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59 msgctxt "@action:inmenu menubar:view" msgid "Orthographic" msgstr "Merőleges" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50 msgctxt "@label" msgid "View type" msgstr "Nézet típus" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64 msgctxt "@label" msgid "Sign in to the Ultimaker platform" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39 msgctxt "@text" msgid "" "- Add material profiles and plug-ins from the Marketplace\n" "- Back-up and sync your material profiles and plug-ins\n" "- Share ideas and get help from 48,000+ users in the Ultimaker community" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58 msgctxt "@button" msgid "Create a free Ultimaker account" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24 msgctxt "@action:button" msgid "Sign in" msgstr "Bejelentkezés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77 msgctxt "@label The argument is a timestamp" msgid "Last update: %1" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104 msgctxt "@button" msgid "Ultimaker Account" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120 msgctxt "@button" msgid "Sign Out" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28 msgctxt "@label" msgid "Checking..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35 msgctxt "@label" msgid "Account synced" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42 msgctxt "@label" msgid "Something went wrong..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95 msgctxt "@button" msgid "Install pending updates" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116 msgctxt "@button" msgid "Check for account updates" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54 msgctxt "@label:PrintjobStatus" msgid "Slicing..." msgstr "Szeletelés..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81 msgctxt "@label:PrintjobStatus" msgid "Unable to slice" msgstr "Nem szeletelhető" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120 msgctxt "@button" msgid "Processing" msgstr "Feldolgozás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120 msgctxt "@button" msgid "Slice" msgstr "Szeletelés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121 msgctxt "@label" msgid "Start the slicing process" msgstr "Szeletelés indítása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137 msgctxt "@button" msgid "Cancel" msgstr "Elvet" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31 msgctxt "@label" msgid "Time estimation" msgstr "Időbecslés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114 msgctxt "@label" msgid "Material estimation" msgstr "Anyag becslés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164 msgctxt "@label m for meter" msgid "%1m" msgstr "%1m" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165 msgctxt "@label g for grams" msgid "%1g" msgstr "%1g" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59 msgctxt "@label" msgid "No time estimation available" msgstr "Nincs időbecslés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77 msgctxt "@label" msgid "No cost estimation available" msgstr "Nincs költségbecslés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127 msgctxt "@button" msgid "Preview" msgstr "Előnézet" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253 msgctxt "@label" msgid "This package will be installed after restarting." msgstr "Ez a csomag újraindítás után fog települni." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14 msgctxt "@title:tab" msgid "General" msgstr "Általános" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466 msgctxt "@title:tab" msgid "Settings" msgstr "Beállítások" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16 msgctxt "@title:tab" msgid "Printers" msgstr "Nyomtatók" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70 msgctxt "@title:tab" msgid "Materials" msgstr "Alapanyagok" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56 msgctxt "@title:tab" msgid "Profiles" msgstr "Profilok" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589 msgctxt "@title:window %1 is the application name" msgid "Closing %1" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599 msgctxt "@label %1 is the application name" msgid "Are you sure you want to exit %1?" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747 msgctxt "@window:title" msgid "Install Package" msgstr "Csomag telepítése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754 msgctxt "@title:window" msgid "Open File(s)" msgstr "Fájl(ok) megnyitása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756 msgctxt "@text:window" msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one." msgstr "A kiválasztott fájlok között több G-kód fájl is található.Egyszerre csak egy G-kód fájlt nyithat meg, ezért csak egy ilyen fájlt válasszon ki." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836 msgctxt "@title:window" msgid "Add Printer" msgstr "Nyomtató hozzáadása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844 msgctxt "@title:window" msgid "What's New" msgstr "Újdonságok" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13 msgctxt "@label:Should be short" msgid "On" msgstr "Be" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14 msgctxt "@label:Should be short" msgid "Off" msgstr "Ki" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34 msgctxt "@label" msgid "Experimental" msgstr "Tapasztalati" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642 msgctxt "@label" msgid "Print settings" msgstr "Nyomtatási beállítások" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21 msgctxt "@label shown when we load a Gcode file" msgid "Print setup disabled. G-code file can not be modified." msgstr "A nyomtatás beállítása letiltva. A G-kód fájl nem módosítható." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144 msgctxt "@button" msgid "Recommended" msgstr "Ajánlott" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158 msgctxt "@button" msgid "Custom" msgstr "Egyéni" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')" msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead" msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead" msgstr[0] "" msgstr[1] "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195 msgctxt "@label" msgid "Gradual infill" msgstr "Fokozatos kitöltés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233 msgctxt "@label" msgid "Gradual infill will gradually increase the amount of infill towards the top." msgstr "A fokozatos kitöltés folyamatosan növeli a kitöltés mennyiségét, ahogy közeledik a tárgy teteje felé." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28 msgctxt "@label" msgid "Support" msgstr "Támasz" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69 msgctxt "@label" msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing." msgstr "A támasz létrehozása segíti a modell kinyúló részeinek hibátlan nyomatását. Támasz nélkül, ezek a részek összeomlanak, és nem lehetséges a hibátlan nyomtatás." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779 msgctxt "@label" msgid "Profiles" msgstr "Profilok" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80 msgctxt "@tooltip" msgid "You have modified some profile settings. If you want to change these go to custom mode." msgstr "Megváltoztattál néhány profilbeállítást. Ha ezeket szeretnéd folyamatosan megtartani, akkor válaszd az 'Egyéni mód' -ot." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27 msgctxt "@label" msgid "Adhesion" msgstr "Letapadás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72 msgctxt "@label" msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards." msgstr "Engedélyezze a peremet, vagy az aláúsztatást. Ez létre fog hozni a test szélén illetve az alján egy olyan részt, ami segíti a letapadást, viszont nyomtatás után ezek könnyen eltávolíthatóak a testről." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158 msgctxt "@label:header" msgid "Custom profiles" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147 msgctxt "@action:button" msgid "Discard current changes" msgstr "A jelenlegi változások elvetése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46 msgctxt "@label" msgid "Profile" msgstr "Profil" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157 msgctxt "@tooltip" msgid "" "Some setting/override values are different from the values stored in the profile.\n" "\n" "Click to open the profile manager." msgstr "" "Néhány beállított vagy felülbírált érték eltérő, a profilban tárolt értéktől. \n" "\n" "Kattints, hogy megnyisd a profil menedzsert." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37 msgctxt "@title:column" msgid "Setting" msgstr "Beállítás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38 msgctxt "@title:column" msgid "Profile" msgstr "Profil" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39 msgctxt "@title:column" msgid "Current" msgstr "Jelenlegi" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40 msgctxt "@title:column Unit of measurement" msgid "Unit" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22 msgctxt "@title:window" msgid "Rename" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23 msgctxt "@info" msgid "Please provide a new name." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56 msgctxt "@item:tooltip" msgid "This setting has been hidden by the active machine and will not be visible." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73 msgctxt "@item:tooltip %1 is list of setting names" msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible." msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible." msgstr[0] "" msgstr[1] "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13 msgctxt "@title:tab" msgid "Setting Visibility" msgstr "Láthatóság beállítása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131 msgctxt "@action:button" msgid "Defaults" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53 msgctxt "@label:textbox" msgid "Check all" msgstr "Mindent ellenőrizni" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49 msgctxt "@action:button" msgid "Add New" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293 msgctxt "@action:button" msgid "Activate" msgstr "Aktivál" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330 msgctxt "@action:button" msgid "Rename" msgstr "Átnevezés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121 msgctxt "@title:window" msgid "Confirm Diameter Change" msgstr "Új átmérő megerősítése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122 msgctxt "@label (%1 is a number)" msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?" msgstr "Az új nyomtatószál átmérő %1 mm -re lett beállítva. Ez nem kompatibilis a jelenlegi extruderrel. Biztos, hogy így folytatod?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152 msgctxt "@label" msgid "Display Name" msgstr "Megjelenítendő név" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171 msgctxt "@label" msgid "Brand" msgstr "Márka" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190 msgctxt "@label" msgid "Material Type" msgstr "Alapanyag típus" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209 msgctxt "@label" msgid "Color" msgstr "Szín" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261 msgctxt "@title" msgid "Material color picker" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274 msgctxt "@label" msgid "Properties" msgstr "Tulajdonságok" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285 msgctxt "@label" msgid "Density" msgstr "Sűrűség" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318 msgctxt "@label" msgid "Diameter" msgstr "Átmérő" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368 msgctxt "@label" msgid "Filament Cost" msgstr "Nyomtatószál költség" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400 msgctxt "@label" msgid "Filament weight" msgstr "Nyomtatószál súly" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432 msgctxt "@label" msgid "Filament length" msgstr "Nyomtatószál hossz" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450 msgctxt "@label" msgid "Cost per Meter" msgstr "Költség / méter" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464 msgctxt "@label" msgid "This material is linked to %1 and shares some of its properties." msgstr "Ez az anyag kapcsolódik% 1 -hez és osztja néhány tulajdonságát." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471 msgctxt "@label" msgid "Unlink Material" msgstr "Alapanyag leválasztása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484 msgctxt "@label" msgid "Description" msgstr "Leírás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502 msgctxt "@label" msgid "Adhesion Information" msgstr "Tapadási információ" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637 msgctxt "@title" msgid "Information" msgstr "Információ" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17 msgctxt "@title:window" msgid "Sync materials with printers" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48 msgctxt "@title:header" msgid "Sync materials with printers" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54 msgctxt "@text" msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76 msgctxt "@button" msgid "Why do I need to sync material profiles?" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85 msgctxt "@button" msgid "Start" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127 msgctxt "@title:header" msgid "Sign in" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133 msgctxt "@text" msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587 msgctxt "@button" msgid "Sync materials with USB" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190 msgctxt "@title:header" msgid "The following printers will receive the new material profiles:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197 msgctxt "@title:header" msgid "Something went wrong when sending the materials to the printers." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204 msgctxt "@title:header" msgid "Material profiles successfully synced with the following printers:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429 msgctxt "@button" msgid "Troubleshooting" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406 msgctxt "@text Asking the user whether printers are missing in a list." msgid "Printers missing?" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408 msgctxt "@text" msgid "Make sure all your printers are turned ON and connected to Digital Factory." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417 msgctxt "@button" msgid "Refresh List" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457 msgctxt "@button" msgid "Try again" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698 msgctxt "@button" msgid "Done" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607 msgctxt "@button" msgid "Sync" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519 msgctxt "@button" msgid "Syncing" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537 msgctxt "@title:header" msgid "No printers found" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558 msgctxt "@text" msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570 msgctxt "@button" msgid "Learn how to connect your printer to Digital Factory" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598 msgctxt "@button" msgid "Refresh" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627 msgctxt "@title:header" msgid "Sync material profiles via USB" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633 msgctxt "@text In the UI this is followed by a list of steps the user needs to take." msgid "Follow the following steps to load the new material profiles to your printer." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665 msgctxt "@text" msgid "Click the export material archive button." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666 msgctxt "@text" msgid "Save the .umm file on a USB stick." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667 msgctxt "@text" msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675 msgctxt "@button" msgid "How to load new material profiles to my printer" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334 msgctxt "@button" msgid "Back" msgstr "Vissza" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698 msgctxt "@button" msgid "Export material archive" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733 msgctxt "@title:window" msgid "Export All Materials" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72 msgctxt "@label" msgid "Materials compatible with active printer:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93 msgctxt "@action:button" msgid "Create new" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87 msgctxt "@action:button" msgid "Import" msgstr "Import" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101 msgctxt "@action:button" msgid "Sync with Printers" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310 msgctxt "@action:button" msgid "Duplicate" msgstr "Másolat" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341 msgctxt "@action:button" msgid "Export" msgstr "Export" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386 msgctxt "@title:window" msgid "Confirm Remove" msgstr "Eltávolítás megerősítése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387 msgctxt "@label (%1 is object name)" msgid "Are you sure you wish to remove %1? This cannot be undone!" msgstr "Biztosan el akarod távolítani %1 -et? Ez nem vonható vissza!" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238 msgctxt "@title:window" msgid "Import Material" msgstr "Alapanyag importálás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" msgstr "Sikeres alapanyag import %1" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245 msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not import material %1: %2" msgstr "Nem sikerült importálni az alapanyagot %1: %2" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265 msgctxt "@title:window" msgid "Export Material" msgstr "Alapanyag export" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270 msgctxt "@info:status Don't translate the XML tags and !" msgid "Failed to export material to %1: %2" msgstr "Sikertelen alapanyag export %1: %2" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully exported material to %1" msgstr "Sikeres alapanyag export %1 -ba" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58 msgctxt "@label" msgid "Profiles compatible with active printer:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97 msgctxt "@action:tooltip" msgid "Create new profile from current settings/overrides" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124 msgctxt "@action:label" msgid "Some settings from current profile were overwritten." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139 msgctxt "@action:button" msgid "Update profile." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142 msgctxt "@action:tooltip" msgid "Update profile with current settings/overrides" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157 msgctxt "@action:label" msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below." msgstr "Ez a profil a nyomtató által megadott alapértelmezéseket használja, tehát az alábbi listában nincs egyetlen beállítás módosítás sem." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164 msgctxt "@action:label" msgid "Your current settings match the selected profile." msgstr "Az Ön aktuális beállításai megegyeznek a kiválasztott profillal." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174 msgctxt "@title:tab" msgid "Global Settings" msgstr "Általános beállítások" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277 msgctxt "@title:window" msgid "Create Profile" msgstr "Profil készítés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279 msgctxt "@info" msgid "Please provide a name for this profile." msgstr "Adjon nevet ehhez a profilhoz." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362 msgctxt "@title:window" msgid "Export Profile" msgstr "Profil exportálás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376 msgctxt "@title:window" msgid "Duplicate Profile" msgstr "Profil másolása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403 msgctxt "@title:window" msgid "Rename Profile" msgstr "Profil átnevezés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423 msgctxt "@title:window" msgid "Import Profile" msgstr "Profil importálás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169 msgctxt "@label" msgid "Interface" msgstr "Interfész" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213 msgctxt "@heading" msgid "-- incomplete --" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258 msgctxt "@label" msgid "Currency:" msgstr "Pénznem:" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273 msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed." msgid "Theme*:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319 msgctxt "@info:tooltip" msgid "Slice automatically when changing settings." msgstr "Automatikus újraszeletelés, ha a beállítások megváltoznak." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327 msgctxt "@option:check" msgid "Slice automatically" msgstr "Automatikus szeletelés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336 msgctxt "@label" msgid "*You will need to restart the application for these changes to have effect." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351 msgctxt "@label" msgid "Viewport behavior" msgstr "A nézetablak viselkedése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359 msgctxt "@info:tooltip" msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly." msgstr "Jelölje meg pirossal azokat a területeket, amiket szükséges alátámasztani.Ha ezeket a részeket nem támasztjuk alá, a nyomtatás nem lesz hibátlan." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368 msgctxt "@option:check" msgid "Display overhang" msgstr "Túlnyúlás kijelzése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378 msgctxt "@info:tooltip" msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387 msgctxt "@option:check" msgid "Display model errors" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395 msgctxt "@info:tooltip" msgid "Moves the camera so the model is in the center of the view when a model is selected" msgstr "A kamerát úgy mozgatja, hogy a modell kiválasztásakor, az a nézet középpontjában legyen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400 msgctxt "@action:button" msgid "Center camera when item is selected" msgstr "Kamera középre, mikor az elem ki van választva" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410 msgctxt "@info:tooltip" msgid "Should the default zoom behavior of cura be inverted?" msgstr "Megfordítsuk-e az alapértelmezett Zoom viselkedését?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415 msgctxt "@action:button" msgid "Invert the direction of camera zoom." msgstr "Fordítsa meg a kamera zoom irányát." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431 msgctxt "@info:tooltip" msgid "Should zooming move in the direction of the mouse?" msgstr "A nagyítás az egér mozgatásának irányában mozogjon?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431 msgctxt "@info:tooltip" msgid "Zooming towards the mouse is not supported in the orthographic perspective." msgstr "Az egér felé történő nagyítás ortográfiai szempontból nem támogatott." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436 msgctxt "@action:button" msgid "Zoom toward mouse direction" msgstr "Nagyítás az egér mozgás irányában" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462 msgctxt "@info:tooltip" msgid "Should models on the platform be moved so that they no longer intersect?" msgstr "Az alapsíkon lévő modelleket elmozgassuk úgy, hogy ne keresztezzék egymást?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467 msgctxt "@option:check" msgid "Ensure models are kept apart" msgstr "A modellek egymástól való távtartásának biztosítása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476 msgctxt "@info:tooltip" msgid "Should models on the platform be moved down to touch the build plate?" msgstr "A modelleket mozgatni kell lefelé, hogy érintsék a tárgyasztalt?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481 msgctxt "@option:check" msgid "Automatically drop models to the build plate" msgstr "Modellek automatikus tárgyasztalra illesztése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493 msgctxt "@info:tooltip" msgid "Show caution message in g-code reader." msgstr "Figyelmeztető üzenet megjelenítése g-kód olvasóban." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502 msgctxt "@option:check" msgid "Caution message in g-code reader" msgstr "Figyelmeztető üzenet a g-code olvasóban" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510 msgctxt "@info:tooltip" msgid "Should layer be forced into compatibility mode?" msgstr "Kényszerítsük a réteget kompatibilitási módba ?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515 msgctxt "@option:check" msgid "Force layer view compatibility mode (restart required)" msgstr "A rétegnézet kompatibilis módjának kényszerítése (újraindítás szükséges)" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525 msgctxt "@info:tooltip" msgid "Should Cura open at the location it was closed?" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530 msgctxt "@option:check" msgid "Restore window position on start" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540 msgctxt "@info:tooltip" msgid "What type of camera rendering should be used?" msgstr "Milyen fípusú fényképezőgépet használunk?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547 msgctxt "@window:text" msgid "Camera rendering:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554 msgid "Perspective" msgstr "Perspetívikus" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555 msgid "Orthographic" msgstr "Merőleges" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595 msgctxt "@label" msgid "Opening and saving files" msgstr "Fájlok megnyitása és mentése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602 msgctxt "@info:tooltip" msgid "Should opening files from the desktop or external applications open in the same instance of Cura?" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607 msgctxt "@option:check" msgid "Use a single instance of Cura" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618 msgctxt "@info:tooltip" msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624 msgctxt "@option:check" msgid "Clear buildplate before loading model into the single instance" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634 msgctxt "@info:tooltip" msgid "Should models be scaled to the build volume if they are too large?" msgstr "A modelleket átméretezzük a maximális építési méretre, ha azok túl nagyok?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639 msgctxt "@option:check" msgid "Scale large models" msgstr "Nagy modellek átméretezése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649 msgctxt "@info:tooltip" msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?" msgstr "Egy adott modell rendkívül kicsinek tűnhet, ha mértékegysége például méterben van, nem pedig milliméterben. Ezeket a modelleket átméretezzük?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654 msgctxt "@option:check" msgid "Scale extremely small models" msgstr "Extrém kicsi modellek átméretezése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664 msgctxt "@info:tooltip" msgid "Should models be selected after they are loaded?" msgstr "Betöltés után a modellek legyenek kiválasztva?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669 msgctxt "@option:check" msgid "Select models when loaded" msgstr "Modell kiválasztása betöltés után" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679 msgctxt "@info:tooltip" msgid "Should a prefix based on the printer name be added to the print job name automatically?" msgstr "A nyomtató nevét, mint előtagot, hozzáadjuk a nyomtatási feladat nevéhez?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684 msgctxt "@option:check" msgid "Add machine prefix to job name" msgstr "Gépnév előtagként a feladatnévben" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694 msgctxt "@info:tooltip" msgid "Should a summary be shown when saving a project file?" msgstr "Mutassuk az összegzést a projekt mentésekor?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698 msgctxt "@option:check" msgid "Show summary dialog when saving project" msgstr "Összegzés megjelenítése projekt mentésekor" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708 msgctxt "@info:tooltip" msgid "Default behavior when opening a project file" msgstr "Alapértelmezett viselkedés a projektfájl megnyitásakor" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716 msgctxt "@window:text" msgid "Default behavior when opening a project file: " msgstr "Alapértelmezett viselkedés a projektfájl megnyitásakor: " #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731 msgctxt "@option:openProject" msgid "Always ask me this" msgstr "Mindig kérdezz" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732 msgctxt "@option:openProject" msgid "Always open as a project" msgstr "Projektként való megnyitás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733 msgctxt "@option:openProject" msgid "Always import models" msgstr "Importálja a modelleket" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770 msgctxt "@info:tooltip" msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again." msgstr "Ha módosított egy profilt, és váltott egy másikra, akkor megjelenik egy párbeszédpanel, amelyben megkérdezi, hogy meg kívánja-e tartani a módosításokat, vagy nem. Vagy választhat egy alapértelmezett viselkedést, és soha többé nem jeleníti meg ezt a párbeszédablakot." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784 msgctxt "@window:text" msgid "Default behavior for changed setting values when switching to a different profile: " msgstr "Alapértelmezett viselkedés a megváltozott beállítási értékeknél, ha másik profilra vált: " #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799 msgctxt "@option:discardOrKeep" msgid "Always discard changed settings" msgstr "Megváltozott beállítások elvetése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800 msgctxt "@option:discardOrKeep" msgid "Always transfer changed settings to new profile" msgstr "Megváltozott beállítások alkalmazása az új profilba" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834 msgctxt "@label" msgid "Privacy" msgstr "Magán" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840 msgctxt "@info:tooltip" msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored." msgstr "Elküldjük a nyomtatott adatokat név nélkül az Ultimaker-nek?Semmilyen személyes infromáció, IP cím vagy azonosító nem kerül elküldésre." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845 msgctxt "@option:check" msgid "Send (anonymous) print information" msgstr "Név nélküli információ küldés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875 msgctxt "@label" msgid "Updates" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882 msgctxt "@info:tooltip" msgid "Should Cura check for updates when the program is started?" msgstr "A Cura-nak ellenőriznie kell-e a frissítéseket a program indításakor?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887 msgctxt "@option:check" msgid "Check for updates on start" msgstr "Keressen frissítéseket az induláskor" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903 msgctxt "@info:tooltip" msgid "When checking for updates, only check for stable releases." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909 msgctxt "@option:radio" msgid "Stable releases only" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919 msgctxt "@info:tooltip" msgid "When checking for updates, check for both stable and for beta releases." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925 msgctxt "@option:radio" msgid "Stable and Beta releases" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935 msgctxt "@info:tooltip" msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940 msgctxt "@option:check" msgid "Get notifications for plugin updates" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70 msgctxt "@label" msgid "Add printer by IP address" msgstr "Nyomtató hozzáadása IP címmel" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133 msgctxt "@text" msgid "Enter your printer's IP address." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158 msgctxt "@button" msgid "Add" msgstr "Hozzáad" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206 msgctxt "@label" msgid "Could not connect to device." msgstr "Nem sikerült csatlakozni az eszközhöz." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212 msgctxt "@label" msgid "Can't connect to your Ultimaker printer?" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211 msgctxt "@label" msgid "The printer at this address has not responded yet." msgstr "Az ezen a címen található nyomtató még nem válaszolt." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245 msgctxt "@label" msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group." msgstr "Ezt a nyomtatót nem lehet hozzáadni, mert ismeretlen a nyomtató vagy nem egy csoport tagja." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347 msgctxt "@button" msgid "Connect" msgstr "Csatlakozás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24 msgctxt "@label" msgid "Release Notes" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23 msgctxt "@label" msgid "User Agreement" msgstr "Felhasználói Szerződés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53 msgctxt "@button" msgid "Agree" msgstr "Elfogadás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67 msgctxt "@button" msgid "Decline and close" msgstr "Elutasítás és bezárás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29 msgctxt "@label" msgid "What's New" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 msgctxt "@button" msgid "Next" msgstr "Következő" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47 msgctxt "@label" msgid "Add a Cloud printer" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74 msgctxt "@label" msgid "Waiting for Cloud response" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86 msgctxt "@label" msgid "No printers found in your account?" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121 msgctxt "@label" msgid "The following printers in your account have been added in Cura:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194 msgctxt "@button" msgid "Add printer manually" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124 msgctxt "@text" msgid "Add material settings and plugins from the Marketplace" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154 msgctxt "@text" msgid "Backup and sync your material settings and plugins" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184 msgctxt "@text" msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202 msgctxt "@button" msgid "Skip" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214 msgctxt "@text" msgid "Create a free Ultimaker Account" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56 msgctxt "@label" msgid "Welcome to Ultimaker Cura" msgstr "Üdvözöljük az Ultimaker Cura-ban" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68 msgctxt "@text" msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86 msgctxt "@button" msgid "Get started" msgstr "Kezdj hozzá" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93 msgctxt "@label" msgid "Empty" msgstr "Üres" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206 msgctxt "@label" msgid "Manufacturer" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217 msgctxt "@label" msgid "Profile author" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229 msgctxt "@label" msgid "Printer name" msgstr "Nyomtató név" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@text" msgid "Please name your printer" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24 msgctxt "@label" msgid "Add a printer" msgstr "Nyomtató hozzáadása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39 msgctxt "@label" msgid "Add a networked printer" msgstr "Hálózati nyomtató hozzáadása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88 msgctxt "@label" msgid "Add a non-networked printer" msgstr "Helyi nyomtató hozzáadása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43 msgctxt "@label" msgid "There is no printer found over your network." msgstr "A hálózaton nem található nyomtató." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162 msgctxt "@label" msgid "Refresh" msgstr "Frissítés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173 msgctxt "@label" msgid "Add printer by IP" msgstr "Nyomtató hozzáadása IP címmel" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184 msgctxt "@label" msgid "Add cloud printer" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221 msgctxt "@label" msgid "Troubleshooting" msgstr "Hibaelhárítás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24 msgctxt "@label" msgid "Help us to improve Ultimaker Cura" msgstr "Segítsen nekünk az Ultimaker Cura fejlesztésében" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57 msgctxt "@text" msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:" msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javításának érdekében, ideértve:" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71 msgctxt "@text" msgid "Machine types" msgstr "Géptípusok" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77 msgctxt "@text" msgid "Material usage" msgstr "Anyagfelhasználás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83 msgctxt "@text" msgid "Number of slices" msgstr "Szeletek száma" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89 msgctxt "@text" msgid "Print settings" msgstr "Nyomtatási beállítások" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102 msgctxt "@text" msgid "Data collected by Ultimaker Cura will not contain any personal information." msgstr "Az Ultimaker Cura által gyűjtött adatok nem tartalmaznak személyes információt." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103 msgctxt "@text" msgid "More information" msgstr "Több információ" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59 msgctxt "@label" msgid "Object list" msgstr "Objektum lista" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109 msgctxt "@label" msgid "Is printed as support." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112 msgctxt "@label" msgid "Other models overlapping with this model are modified." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115 msgctxt "@label" msgid "Infill overlapping with this model is modified." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118 msgctxt "@label" msgid "Overlaps with this model are not supported." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125 msgctxt "@label %1 is the number of settings it overrides." msgid "Overrides %1 setting." msgid_plural "Overrides %1 settings." msgstr[0] "" msgstr[1] "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24 msgctxt "@label" msgid "Connected printers" msgstr "Csatlakoztatott nyomtatók" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24 msgctxt "@label" msgid "Preset printers" msgstr "Előre beállított nyomtatók" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47 msgctxt "@status" msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51 msgctxt "@status" msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56 msgctxt "@status" msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60 msgctxt "@status" msgid "The cloud connection is currently unavailable. Please check your internet connection." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236 msgctxt "@button" msgid "Add printer" msgstr "Nyomtató hozzáadása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253 msgctxt "@button" msgid "Manage printers" msgstr "Nyomtatók kezelése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17 msgctxt "@placeholder" msgid "Search" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93 msgctxt "@text Print job name" msgid "Untitled" msgstr "Névtelen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115 msgctxt "@label:MonitorStatus" msgid "Not connected to a printer" msgstr "Nincs nyomtatóhoz csatlakoztatva" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119 msgctxt "@label:MonitorStatus" msgid "Printer does not accept commands" msgstr "A nyomtató nem fogadja a parancsokat" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129 msgctxt "@label:MonitorStatus" msgid "In maintenance. Please check the printer" msgstr "Karbantartás alatt. Ellenőrizze a nyomtatót" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140 msgctxt "@label:MonitorStatus" msgid "Lost connection with the printer" msgstr "Elveszett a kapcsolat a nyomtatóval" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142 msgctxt "@label:MonitorStatus" msgid "Printing..." msgstr "Nyomtatás..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145 msgctxt "@label:MonitorStatus" msgid "Paused" msgstr "Felfüggsztve" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148 msgctxt "@label:MonitorStatus" msgid "Preparing..." msgstr "Előkészítés..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150 msgctxt "@label:MonitorStatus" msgid "Please remove the print" msgstr "Távolítsa el a tárgyat" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318 msgctxt "@label" msgid "Abort Print" msgstr "Nyomtatás megszakítás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327 msgctxt "@label" msgid "Are you sure you want to abort the print?" msgstr "Biztosan meg akarod szakítani a nyomtatást?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115 msgctxt "@label" msgid "" "Some hidden settings use values different from their normal calculated value.\n" "\n" "Click to make these settings visible." msgstr "" "Egyes beállítások eltérő értéken vannak a normál, kalkulált értékektől.\n" "\n" "Kattints, hogy ezek a beállítások láthatók legyenek." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47 msgctxt "@label:textbox" msgid "Search settings" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428 msgctxt "@action:menu" msgid "Copy value to all extruders" msgstr "Értékek másolása minden extruderre" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437 msgctxt "@action:menu" msgid "Copy all changed values to all extruders" msgstr "Minden változott érték másolása minden extruderre" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473 msgctxt "@action:menu" msgid "Hide this setting" msgstr "Beállítás elrejtése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486 msgctxt "@action:menu" msgid "Don't show this setting" msgstr "Ne jelenítsd meg ezt a beállítást" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490 msgctxt "@action:menu" msgid "Keep this setting visible" msgstr "Beállítás látható marad" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467 msgctxt "@action:menu" msgid "Configure setting visibility..." msgstr "Beállítások láthatóságának beállítása..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78 msgctxt "@label" msgid "This setting is not used because all the settings that it influences are overridden." msgstr "Ezt a beállítást nem használjuk, mert minden ezen beállítással befolyásolt egyéb beállítás értéke felül van bírálva." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83 msgctxt "@label Header for list of settings." msgid "Affects" msgstr "Befolyásolások" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88 msgctxt "@label Header for list of settings." msgid "Affected By" msgstr "Befolyásolja" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185 msgctxt "@label" msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders." msgstr "Ezt a beállítást megoszta az összes extruder között. Az itt megváltoztatott értékek az összes extrudernél meg fognak változni." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189 msgctxt "@label" msgid "This setting is resolved from conflicting extruder-specific values:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229 msgctxt "@label" msgid "" "This setting has a value that is different from the profile.\n" "\n" "Click to restore the value of the profile." msgstr "" "Ennek a beállításnak az értéke eltér a profilban megadottól.\n" "\n" "Kattintson a profil értékének visszaállításához." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329 msgctxt "@label" msgid "" "This setting is normally calculated, but it currently has an absolute value set.\n" "\n" "Click to restore the calculated value." msgstr "" "Ez az érték általában kalulálva van, de jelenleg abszolút értékre van beállítva \n" "\n" "Kattintson, hogy visszaállítsuk a kalkulált értéket." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104 msgctxt "@label" msgid "Hex" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156 msgctxt "@label" msgid "Active print" msgstr "Aktív nyomtatás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164 msgctxt "@label" msgid "Job Name" msgstr "Feladat név" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172 msgctxt "@label" msgid "Printing Time" msgstr "Nyomtatási idő" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180 msgctxt "@label" msgid "Estimated time left" msgstr "Becsült hátralévő idő" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81 msgctxt "@action:inmenu" msgid "Show Online Troubleshooting" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88 msgctxt "@action:inmenu" msgid "Toggle Full Screen" msgstr "Teljes képernyőre váltás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96 msgctxt "@action:inmenu" msgid "Exit Full Screen" msgstr "Kilépés a teljes képernyőn" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103 msgctxt "@action:inmenu menubar:edit" msgid "&Undo" msgstr "&Visszavon" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113 msgctxt "@action:inmenu menubar:edit" msgid "&Redo" msgstr "&Újra" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131 msgctxt "@action:inmenu menubar:file" msgid "&Quit" msgstr "Kilép" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139 msgctxt "@action:inmenu menubar:view" msgid "3D View" msgstr "3D nézet" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146 msgctxt "@action:inmenu menubar:view" msgid "Front View" msgstr "Előlnézet" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153 msgctxt "@action:inmenu menubar:view" msgid "Top View" msgstr "Felülnézet" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160 msgctxt "@action:inmenu menubar:view" msgid "Bottom View" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167 msgctxt "@action:inmenu menubar:view" msgid "Left Side View" msgstr "Bal oldalnézet" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174 msgctxt "@action:inmenu menubar:view" msgid "Right Side View" msgstr "Jobb oldalnézet" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188 msgctxt "@action:inmenu" msgid "Configure Cura..." msgstr "Cura beállítása..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195 msgctxt "@action:inmenu menubar:printer" msgid "&Add Printer..." msgstr "&Nyomtató hozzáadása..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201 msgctxt "@action:inmenu menubar:printer" msgid "Manage Pr&inters..." msgstr "Nyomtatók kezelése..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208 msgctxt "@action:inmenu" msgid "Manage Materials..." msgstr "Anyagok kezelése..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216 msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate." msgid "Add more materials from Marketplace" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223 msgctxt "@action:inmenu menubar:profile" msgid "&Update profile with current settings/overrides" msgstr "Profil &frissítése a jelenlegi beállításokkal/felülírásokkal" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231 msgctxt "@action:inmenu menubar:profile" msgid "&Discard current changes" msgstr "&Jelenlegi változtatások eldobása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243 msgctxt "@action:inmenu menubar:profile" msgid "&Create profile from current settings/overrides..." msgstr "Profil &létrehozása a jelenlegi beállításokkal/felülírásokkal..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249 msgctxt "@action:inmenu menubar:profile" msgid "Manage Profiles..." msgstr "Profilok kezelése..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257 msgctxt "@action:inmenu menubar:help" msgid "Show Online &Documentation" msgstr "Online &Dokumentumok megjelenítése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265 msgctxt "@action:inmenu menubar:help" msgid "Report a &Bug" msgstr "Hibajelentés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273 msgctxt "@action:inmenu menubar:help" msgid "What's New" msgstr "Újdonságok" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287 msgctxt "@action:inmenu menubar:help" msgid "About..." msgstr "Rólunk..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294 msgctxt "@action:inmenu menubar:edit" msgid "Delete Selected" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304 msgctxt "@action:inmenu menubar:edit" msgid "Center Selected" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313 msgctxt "@action:inmenu menubar:edit" msgid "Multiply Selected" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322 msgctxt "@action:inmenu" msgid "Delete Model" msgstr "Modell törlés" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330 msgctxt "@action:inmenu" msgid "Ce&nter Model on Platform" msgstr "&Középső modell a platformon" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336 msgctxt "@action:inmenu menubar:edit" msgid "&Group Models" msgstr "&Csoportosítás" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356 msgctxt "@action:inmenu menubar:edit" msgid "Ungroup Models" msgstr "Csoport bontása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366 msgctxt "@action:inmenu menubar:edit" msgid "&Merge Models" msgstr "&Modellek keverése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376 msgctxt "@action:inmenu" msgid "&Multiply Model..." msgstr "&Modell többszörözés..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383 msgctxt "@action:inmenu menubar:edit" msgid "Select All Models" msgstr "Mindent kijelöl" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393 msgctxt "@action:inmenu menubar:edit" msgid "Clear Build Plate" msgstr "Tárgyasztal törlése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403 msgctxt "@action:inmenu menubar:file" msgid "Reload All Models" msgstr "Mindent újratölt" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412 msgctxt "@action:inmenu menubar:edit" msgid "Arrange All Models" msgstr "Minden modell rendezése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420 msgctxt "@action:inmenu menubar:edit" msgid "Arrange Selection" msgstr "Kijelöltek rendezése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427 msgctxt "@action:inmenu menubar:edit" msgid "Reset All Model Positions" msgstr "Minden modellpozíció visszaállítása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434 msgctxt "@action:inmenu menubar:edit" msgid "Reset All Model Transformations" msgstr "Minden modelltranszformáció visszaállítása" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443 msgctxt "@action:inmenu menubar:file" msgid "&Open File(s)..." msgstr "Fájl(ok) megnyitása..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453 msgctxt "@action:inmenu menubar:file" msgid "&New Project..." msgstr "Új projekt..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460 msgctxt "@action:inmenu menubar:help" msgid "Show Configuration Folder" msgstr "Konfigurációs mappa megjelenítése" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25 msgctxt "@info:tooltip" msgid "3D View" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38 msgctxt "@info:tooltip" msgid "Front View" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51 msgctxt "@info:tooltip" msgid "Top View" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64 msgctxt "@info:tooltip" msgid "Left View" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77 msgctxt "@info:tooltip" msgid "Right View" msgstr "" #: PrepareStage/plugin.json msgctxt "description" msgid "Provides a prepare stage in Cura." msgstr "Biztosítja az előkészítés nézetet a Cura-ban." #: PrepareStage/plugin.json msgctxt "name" msgid "Prepare Stage" msgstr "Előkészítés nézet" #: CuraProfileWriter/plugin.json msgctxt "description" msgid "Provides support for exporting Cura profiles." msgstr "Támogatást nyújt a Cura profilok exportálásához." #: CuraProfileWriter/plugin.json msgctxt "name" msgid "Cura Profile Writer" msgstr "Cura profil író" #: TrimeshReader/plugin.json msgctxt "description" msgid "Provides support for reading model files." msgstr "Támogatást nyújt a modellfájlok olvasásához." #: TrimeshReader/plugin.json msgctxt "name" msgid "Trimesh Reader" msgstr "Trimesh olvasó" #: FirmwareUpdateChecker/plugin.json msgctxt "description" msgid "Checks for firmware updates." msgstr "Ellenőrzi a firmware frissítéseket." #: FirmwareUpdateChecker/plugin.json msgctxt "name" msgid "Firmware Update Checker" msgstr "Frimrware frissítés ellenőrző" #: SentryLogger/plugin.json msgctxt "description" msgid "Logs certain events so that they can be used by the crash reporter" msgstr "" #: SentryLogger/plugin.json msgctxt "name" msgid "Sentry Logger" msgstr "" #: MonitorStage/plugin.json msgctxt "description" msgid "Provides a monitor stage in Cura." msgstr "Monitor nézetet biztosít a Cura -ban." #: MonitorStage/plugin.json msgctxt "name" msgid "Monitor Stage" msgstr "Monitor nézet" #: RemovableDriveOutputDevice/plugin.json msgctxt "description" msgid "Provides removable drive hotplugging and writing support." msgstr "Támogatás a cserélhető meghajtók üzem közbeni cseréjét és írását." #: RemovableDriveOutputDevice/plugin.json msgctxt "name" msgid "Removable Drive Output Device Plugin" msgstr "Cserélhető meghajtók kimeneti beépülője" #: AMFReader/plugin.json msgctxt "description" msgid "Provides support for reading AMF files." msgstr "Támogatást nyújt az AMF fájlok olvasásához." #: AMFReader/plugin.json msgctxt "name" msgid "AMF Reader" msgstr "AMF Olvasó" #: UFPReader/plugin.json msgctxt "description" msgid "Provides support for reading Ultimaker Format Packages." msgstr "Támogatást nyújt az Ultimaker formátumú csomagok olvasásához." #: UFPReader/plugin.json msgctxt "name" msgid "UFP Reader" msgstr "UFP Olvasó" #: DigitalLibrary/plugin.json msgctxt "description" msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library." msgstr "" #: DigitalLibrary/plugin.json msgctxt "name" msgid "Ultimaker Digital Library" msgstr "" #: PerObjectSettingsTool/plugin.json msgctxt "description" msgid "Provides the Per Model Settings." msgstr "Biztosítja a modellenkénti beállításokat." #: PerObjectSettingsTool/plugin.json msgctxt "name" msgid "Per Model Settings Tool" msgstr "Modellenkénti beállítás-eszköz" #: FirmwareUpdater/plugin.json msgctxt "description" msgid "Provides a machine actions for updating firmware." msgstr "Gépi funkciókat biztosít a firmware frissítéséhez." #: FirmwareUpdater/plugin.json msgctxt "name" msgid "Firmware Updater" msgstr "Firmware frissítő" #: UM3NetworkPrinting/plugin.json msgctxt "description" msgid "Manages network connections to Ultimaker networked printers." msgstr "Kezeli a hálózati csatlakozásokat az Ultimaker hálózati nyomtatókhoz." #: UM3NetworkPrinting/plugin.json msgctxt "name" msgid "Ultimaker Network Connection" msgstr "Ultimaker hálózati kapcsolat" #: ModelChecker/plugin.json msgctxt "description" msgid "Checks models and print configuration for possible printing issues and give suggestions." msgstr "Ellenőrzi a modelleket és a nyomtatási konfigurációt a lehetséges nyomtatási problémákra vonatkozóan, és javaslatokat ad." #: ModelChecker/plugin.json msgctxt "name" msgid "Model Checker" msgstr "Modell-ellenőrző" #: SimulationView/plugin.json msgctxt "description" msgid "Provides the preview of sliced layerdata." msgstr "" #: SimulationView/plugin.json msgctxt "name" msgid "Simulation View" msgstr "Szimulációs nézet" #: GCodeWriter/plugin.json msgctxt "description" msgid "Writes g-code to a file." msgstr "G-kódot ír fájlba." #: GCodeWriter/plugin.json msgctxt "name" msgid "G-code Writer" msgstr "G-kódot író" #: 3MFWriter/plugin.json msgctxt "description" msgid "Provides support for writing 3MF files." msgstr "Támogatást nyújt a 3MF fájlok írásához." #: 3MFWriter/plugin.json msgctxt "name" msgid "3MF Writer" msgstr "3MF író" #: GCodeGzReader/plugin.json msgctxt "description" msgid "Reads g-code from a compressed archive." msgstr "Olvassa be a g-kódot egy tömörített archívumból." #: GCodeGzReader/plugin.json msgctxt "name" msgid "Compressed G-code Reader" msgstr "Tömörített G-kód olvasó" #: XmlMaterialProfile/plugin.json msgctxt "description" msgid "Provides capabilities to read and write XML-based material profiles." msgstr "Lehetővé teszi az XML-alapú anyagprofilok olvasását és írását." #: XmlMaterialProfile/plugin.json msgctxt "name" msgid "Material Profiles" msgstr "Alapanyag profilok" #: CuraEngineBackend/plugin.json msgctxt "description" msgid "Provides the link to the CuraEngine slicing backend." msgstr "Biztosítja a kapcsolatot a CuraEngine szeletelő motorhoz." #: CuraEngineBackend/plugin.json msgctxt "name" msgid "CuraEngine Backend" msgstr "CuraEngine motor" #: X3DReader/plugin.json msgctxt "description" msgid "Provides support for reading X3D files." msgstr "Támogatást nyújt az X3D fájlok olvasásához." #: X3DReader/plugin.json msgctxt "name" msgid "X3D Reader" msgstr "X3D Olvasó" #: ImageReader/plugin.json msgctxt "description" msgid "Enables ability to generate printable geometry from 2D image files." msgstr "Lehetővé teszi a nyomtatható geometria létrehozását 2D-képfájlokból." #: ImageReader/plugin.json msgctxt "name" msgid "Image Reader" msgstr "Kép olvasó" #: 3MFReader/plugin.json msgctxt "description" msgid "Provides support for reading 3MF files." msgstr "Támogatást nyújt a 3MF fájlok olvasásához." #: 3MFReader/plugin.json msgctxt "name" msgid "3MF Reader" msgstr "3MF olvasó" #: UFPWriter/plugin.json msgctxt "description" msgid "Provides support for writing Ultimaker Format Packages." msgstr "Támogatást nyújt az Ultimaker formátumú csomagok írásához." #: UFPWriter/plugin.json msgctxt "name" msgid "UFP Writer" msgstr "UFP Író" #: LegacyProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing profiles from legacy Cura versions." msgstr "Támogatást nyújt a profilok importálásához a régi Cura verziókból." #: LegacyProfileReader/plugin.json msgctxt "name" msgid "Legacy Cura Profile Reader" msgstr "Örökölt Cura profil olvasó" #: VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.3 to Cura 4.4." msgstr "" #: VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "name" msgid "Version Upgrade 4.3 to 4.4" msgstr "" #: VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." msgstr "A konfigurációk frissítése Cura 2.1-ről Cura 2.2-re." #: VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "name" msgid "Version Upgrade 2.1 to 2.2" msgstr "A 2.1-es verzió frissítése 2.2-re" #: VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.1 to Cura 4.2." msgstr "A konfigurációk frissítése Cura 4.1-ről Cura 4.2-re." #: VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "name" msgid "Version Upgrade 4.1 to 4.2" msgstr "A 4.1-es verzió frissítése 4.2-re" #: VersionUpgrade/VersionUpgrade413to50/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.13 to Cura 5.0." msgstr "" #: VersionUpgrade/VersionUpgrade413to50/plugin.json msgctxt "name" msgid "Version Upgrade 4.13 to 5.0" msgstr "" #: VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.5 to Cura 4.6." msgstr "" #: VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "name" msgid "Version Upgrade 4.5 to 4.6" msgstr "" #: VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.3 to Cura 3.4." msgstr "A konfigurációk frissítése Cura 3.3-ról Cura 3.4-re." #: VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "name" msgid "Version Upgrade 3.3 to 3.4" msgstr "A 3.3-as verzió frissítése 3.4-re" #: VersionUpgrade/VersionUpgrade48to49/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.8 to Cura 4.9." msgstr "" #: VersionUpgrade/VersionUpgrade48to49/plugin.json msgctxt "name" msgid "Version Upgrade 4.8 to 4.9" msgstr "" #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." msgstr "A konfigurációk frissítése Cura 2.7-ről Cura 3.0-ra." #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" msgid "Version Upgrade 2.7 to 3.0" msgstr "A 2.7-es verzió frissítése 3.0-ra" #: VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.4 to Cura 4.5." msgstr "" #: VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "name" msgid "Version Upgrade 4.4 to 4.5" msgstr "" #: VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.0 to Cura 3.1." msgstr "A konfigurációk frissítése Cura 3.0-ról Cura 3.1-re." #: VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "name" msgid "Version Upgrade 3.0 to 3.1" msgstr "A 3.0-s verzió frissítése 3.1-re" #: VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2." msgstr "" #: VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "name" msgid "Version Upgrade 4.6.0 to 4.6.2" msgstr "" #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.6 to Cura 2.7." msgstr "A konfigurációk frissítése Cura 2.6-ról Cura 2.7-re." #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "name" msgid "Version Upgrade 2.6 to 2.7" msgstr "A 2.6-os verzió frissítése 2.7-re" #: VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.2 to Cura 4.3." msgstr "A konfigurációk frissítése Cura 4.2-ről Cura 4.3-ra." #: VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "name" msgid "Version Upgrade 4.2 to 4.3" msgstr "A 4.2-es verzió frissítése 4.3-ra" #: VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.0 to Cura 4.1." msgstr "A konfigurációt Cura 4.0-ról Cura 4.1-re frissíti." #: VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "name" msgid "Version Upgrade 4.0 to 4.1" msgstr "A 4.0-s verzió frissítése 4.1-re" #: VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7." msgstr "" #: VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "name" msgid "Version Upgrade 4.6.2 to 4.7" msgstr "" #: VersionUpgrade/VersionUpgrade49to410/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.9 to Cura 4.10." msgstr "" #: VersionUpgrade/VersionUpgrade49to410/plugin.json msgctxt "name" msgid "Version Upgrade 4.9 to 4.10" msgstr "" #: VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.2 to Cura 2.4." msgstr "A konfigurációk frissítése Cura 2.2-ről Cura 2.4-re." #: VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "name" msgid "Version Upgrade 2.2 to 2.4" msgstr "A 2.2-es verzió frissítése 2.4-ig" #: VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.2 to Cura 3.3." msgstr "A konfigurációk frissítése Cura 3.2-ről Cura 3.3-ra." #: VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "name" msgid "Version Upgrade 3.2 to 3.3" msgstr "A 3.2-es verzió frissítése 3.3-ra" #: VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." msgstr "Frissíti a konfigurációt Cura 2.5-ről Cura 2.6-ra." #: VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "name" msgid "Version Upgrade 2.5 to 2.6" msgstr "A 2.5-es verzió frissítése 2.6-ra" #: VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.5 to Cura 4.0." msgstr "A konfigurációk frissítése Cura 3.5-ről Cura 4.0-ra." #: VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "name" msgid "Version Upgrade 3.5 to 4.0" msgstr "A 3.5-es verzió frissítése 4.0-ra" #: VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.4 to Cura 3.5." msgstr "A konfigurációt Cura 3.4-ről Cura 3.5-re frissíti." #: VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "name" msgid "Version Upgrade 3.4 to 3.5" msgstr "A 3.4-es verzió frissítése 3.5-re" #: VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.7 to Cura 4.8." msgstr "" #: VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "name" msgid "Version Upgrade 4.7 to 4.8" msgstr "" #: VersionUpgrade/VersionUpgrade411to412/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.11 to Cura 4.12." msgstr "" #: VersionUpgrade/VersionUpgrade411to412/plugin.json msgctxt "name" msgid "Version Upgrade 4.11 to 4.12" msgstr "" #: CuraDrive/plugin.json msgctxt "description" msgid "Backup and restore your configuration." msgstr "Konfiguráció biztonsági másolat készítése és visszaállítása." #: CuraDrive/plugin.json msgctxt "name" msgid "Cura Backups" msgstr "Cura biztonsági mentések" #: CuraProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing Cura profiles." msgstr "Támogatást nyújt a Cura profilok importálásához." #: CuraProfileReader/plugin.json msgctxt "name" msgid "Cura Profile Reader" msgstr "Cura profil olvasó" #: SliceInfoPlugin/plugin.json msgctxt "description" msgid "Submits anonymous slice info. Can be disabled through preferences." msgstr "Névtelen szelet-információt nyújt be. A beállítások révén letiltható." #: SliceInfoPlugin/plugin.json msgctxt "name" msgid "Slice info" msgstr "Szeletelési infó" #: GCodeProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing profiles from g-code files." msgstr "Támogatást nyújt a profilok g-kód fájlokból történő importálásához." #: GCodeProfileReader/plugin.json msgctxt "name" msgid "G-code Profile Reader" msgstr "G-kód profil olvasó" #: GCodeGzWriter/plugin.json msgctxt "description" msgid "Writes g-code to a compressed archive." msgstr "G-kódot ír egy tömörített archívumba." #: GCodeGzWriter/plugin.json msgctxt "name" msgid "Compressed G-code Writer" msgstr "Tömörített G-kód író" #: PostProcessingPlugin/plugin.json msgctxt "description" msgid "Extension that allows for user created scripts for post processing" msgstr "Bővítmény, amely lehetővé teszi a felhasználó által létrehozott szkriptek utófeldolgozást" #: PostProcessingPlugin/plugin.json msgctxt "name" msgid "Post Processing" msgstr "Utólagos feldolgozás" #: SupportEraser/plugin.json msgctxt "description" msgid "Creates an eraser mesh to block the printing of support in certain places" msgstr "Törlő hálót hoz létre, hogy bizonyos helyeken blokkolja a támasz nyomtatását" #: SupportEraser/plugin.json msgctxt "name" msgid "Support Eraser" msgstr "Támasz törlő" #: PreviewStage/plugin.json msgctxt "description" msgid "Provides a preview stage in Cura." msgstr "Előnézet biztosítása a Cura -ban." #: PreviewStage/plugin.json msgctxt "name" msgid "Preview Stage" msgstr "Előnézet" #: XRayView/plugin.json msgctxt "description" msgid "Provides the X-Ray view." msgstr "Röntgen nézetet biztosít." #: XRayView/plugin.json msgctxt "name" msgid "X-Ray View" msgstr "Röntgen nézet" #: UltimakerMachineActions/plugin.json msgctxt "description" msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)." msgstr "Gépi funkciók biztosítása az Ultimaker nyomtatók számára.(pl.: ágyszintezés varázsló, frissítések kiválasztása.)" #: UltimakerMachineActions/plugin.json msgctxt "name" msgid "Ultimaker machine actions" msgstr "Ultimaker gépi funkciók" #: Marketplace/plugin.json msgctxt "description" msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website." msgstr "" #: Marketplace/plugin.json msgctxt "name" msgid "Marketplace" msgstr "" #: SolidView/plugin.json msgctxt "description" msgid "Provides a normal solid mesh view." msgstr "Felületi háló nézetet biztosít." #: SolidView/plugin.json msgctxt "name" msgid "Solid View" msgstr "Felület nézet" #: GCodeReader/plugin.json msgctxt "description" msgid "Allows loading and displaying G-code files." msgstr "Lehetővé teszi a G-kód fájlok betöltését és megjelenítését." #: GCodeReader/plugin.json msgctxt "name" msgid "G-code Reader" msgstr "G-kód olvasó" #: MachineSettingsAction/plugin.json msgctxt "description" msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)." msgstr "A géoi beállítások megváltoztatásának lehetőségét biztosítja.(például a építési méret, fúvóka méret, stb.)" #: MachineSettingsAction/plugin.json msgctxt "name" msgid "Machine Settings Action" msgstr "" #: USBPrinting/plugin.json msgctxt "description" msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware." msgstr "Elfogadja a G-kódot és elküldi őket egy nyomtatóra. A plugin a firmware-t is frissítheti." #: USBPrinting/plugin.json msgctxt "name" msgid "USB printing" msgstr "USB nyomtatás" #~ msgctxt "@title:window" #~ msgid "Plugin License Agreement" #~ msgstr "Kiegészítő licencszerződés" #~ msgctxt "@title:window" #~ msgid "Convert Image..." #~ msgstr "Kép konvertálás..." #~ msgctxt "@info:tooltip" #~ msgid "The width in millimeters on the build plate." #~ msgstr "A szélesség mm -ben a tárgyasztalon." #~ msgctxt "@title" #~ msgid "Marketplace" #~ msgstr "Áruház" #~ msgctxt "@info" #~ msgid "You will need to restart Cura before changes in packages have effect." #~ msgstr "A csomagok változásainak érvénybe lépése előtt újra kell indítania a Cura-t." #~ msgctxt "@action:button" #~ msgid "Install" #~ msgstr "Telepítés" #~ msgctxt "@action:button" #~ msgid "Installed" #~ msgstr "Telepítve" #~ msgctxt "@label" #~ msgid "Compatibility" #~ msgstr "Kompatibilitás" #~ msgctxt "@label:table_header" #~ msgid "Machine" #~ msgstr "Gép" #~ msgctxt "@label:table_header" #~ msgid "Build Plate" #~ msgstr "Tárgyasztal" #~ msgctxt "@label:table_header" #~ msgid "Support" #~ msgstr "Támasz" #~ msgctxt "@label:table_header" #~ msgid "Quality" #~ msgstr "Minőség" #~ msgctxt "@action:label" #~ msgid "Technical Data Sheet" #~ msgstr "Technikai adatlap" #~ msgctxt "@action:label" #~ msgid "Safety Data Sheet" #~ msgstr "Biztonsági adatlap" #~ msgctxt "@action:label" #~ msgid "Printing Guidelines" #~ msgstr "Nyomtatási útmutató" #~ msgctxt "@action:label" #~ msgid "Website" #~ msgstr "Weboldal" #~ msgctxt "@label:The string between and is the highlighted link" #~ msgid "Log in is required to install or update" #~ msgstr "Bejelentkezés szükséges a telepítéshez vagy frissítéshez" #~ msgctxt "@label:The string between and is the highlighted link" #~ msgid "Buy material spools" #~ msgstr "Anyagtekercsek vásárlása" #~ msgctxt "@action:button" #~ msgid "Update" #~ msgstr "Frissítés" #~ msgctxt "@action:button" #~ msgid "Updating" #~ msgstr "Frissítés" #~ msgctxt "@action:button" #~ msgid "Updated" #~ msgstr "Frissítve" #~ msgctxt "@action:button" #~ msgid "Back" #~ msgstr "Vissza" #~ msgctxt "@title:tab" #~ msgid "Plugins" #~ msgstr "Kiegészítők" #~ msgctxt "@title:tab" #~ msgid "Installed" #~ msgstr "Telepítve" #~ msgctxt "@label" #~ msgid "Will install upon restarting" #~ msgstr "Telepítés után újraindul" #~ msgctxt "@label:The string between and is the highlighted link" #~ msgid "Log in is required to update" #~ msgstr "Bejelentkezés szükséges a frissítéshez" #~ msgctxt "@action:button" #~ msgid "Downgrade" #~ msgstr "Leminősítés" #~ msgctxt "@action:button" #~ msgid "Uninstall" #~ msgstr "Eltávolítás" #~ msgctxt "@label" #~ msgid "Community Contributions" #~ msgstr "Közösségi hozzájárulások" #~ msgctxt "@label" #~ msgid "Community Plugins" #~ msgstr "Közösségi bővítmények" #~ msgctxt "@label" #~ msgid "Generic Materials" #~ msgstr "Általános anyagok" #~ msgctxt "@info" #~ msgid "Fetching packages..." #~ msgstr "Csomagok beolvasása..." #~ msgctxt "@label" #~ msgid "Website" #~ msgstr "Weboldal" #~ msgctxt "@label" #~ msgid "Email" #~ msgstr "Email" #~ msgctxt "@label" #~ msgid "Version" #~ msgstr "Verzió" #~ msgctxt "@label" #~ msgid "Last updated" #~ msgstr "Utosó frissítés" #~ msgctxt "@label" #~ msgid "Downloads" #~ msgstr "Letöltések" #~ msgctxt "@info" #~ msgid "Could not connect to the Cura Package database. Please check your connection." #~ msgstr "Nem sikerült csatlakozni a Cura Package adatbázishoz. Kérjük, ellenőrizze a kapcsolatot." #~ msgctxt "@title:window" #~ msgid "Confirm uninstall" #~ msgstr "Eltávolítás jóváhagyása" #~ msgctxt "@text:window" #~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults." #~ msgstr "Távolítsd el a még használatban lévő anyagokat és / vagy profilokat.A megerősítés visszaállítja az alapanyagokat / profilokat alapértelmezett értékükre." #~ msgctxt "@text:window" #~ msgid "Materials" #~ msgstr "Alapanyagok" #~ msgctxt "@text:window" #~ msgid "Profiles" #~ msgstr "Profilok" #~ msgctxt "@action:button" #~ msgid "Confirm" #~ msgstr "Jóváhagy" #~ msgctxt "@info:tooltip" #~ msgid "Some things could be problematic in this print. Click to see tips for adjustment." #~ msgstr "Néhány dolog problémát jelenthet ebben a nyomtatásban.Kattintson ide a beállítási tippek megtekintéséhez." #~ msgctxt "@label" #~ msgid "Support library for handling planar objects" #~ msgstr "Támogató könyvtár a sík objektumok kezeléséhez" #~ msgctxt "@action:inmenu menubar:view" #~ msgid "&Build plate" #~ msgstr "&Tárgyasztal" #~ msgctxt "@label" #~ msgid "Create" #~ msgstr "Létrehozás" #~ msgctxt "@label" #~ msgid "Duplicate" #~ msgstr "Másolás" #~ msgctxt "@label %1 is printer name" #~ msgid "Printer: %1" #~ msgstr "Nyomtató: %1" #~ msgctxt "@action:button" #~ msgid "Update profile with current settings/overrides" #~ msgstr "Frissítse a profilt az aktuális beállításokkal/felülbírálásokkal" #~ msgctxt "@label" #~ msgid "Theme:" #~ msgstr "Téma:" #~ msgctxt "@label" #~ msgid "You will need to restart the application for these changes to have effect." #~ msgstr "A módosítások érvénybe lépéséhez újra kell indítania az alkalmazást." #~ msgctxt "@action:button" #~ msgid "More information" #~ msgstr "Több információ" #~ msgctxt "@action:button" #~ msgid "Create" #~ msgstr "Létrehoz" #~ msgctxt "@action:label" #~ msgid "Printer" #~ msgstr "Nyomtató" #~ msgctxt "@title:column" #~ msgid "Unit" #~ msgstr "Egység" #~ msgctxt "@action:inmenu" #~ msgid "Show Online Troubleshooting Guide" #~ msgstr "Mutassa az online hibaelhárítási útmutatót" #~ msgctxt "@action:inmenu menubar:edit" #~ msgid "Arrange All Models To All Build Plates" #~ msgstr "Minden modell elrendezése a tárgyasztalon" #~ msgctxt "@action:menu" #~ msgid "&Marketplace" #~ msgstr "&Piactér" #~ msgctxt "description" #~ msgid "Find, manage and install new Cura packages." #~ msgstr "Keressen, kezeljen és telepítsen új Cura csomagokat." #~ msgctxt "name" #~ msgid "Toolbox" #~ msgstr "Eszköztár" #~ msgctxt "description" #~ msgid "Provides the Simulation view." #~ msgstr "Szimulációs nézetet biztosít." #~ msgctxt "@info:status" #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account." #~ msgstr "Küldjön és felügyeljen nyomtatási feladatokat bárhonnan az Ultimaker fiókjával." #~ msgctxt "@info:title The %s gets replaced with the printer name." #~ msgid "New %s firmware available" #~ msgstr "Új %s firmware elérhető" #~ msgctxt "@label:listbox" #~ msgid "Layer thickness" #~ msgstr "Réteg vastagság" #~ msgctxt "@button" #~ msgid "Create account" #~ msgstr "Fiók létrehozása" #~ msgctxt "@action:inmenu menubar:edit" #~ msgid "Delete Selected Model" #~ msgid_plural "Delete Selected Models" #~ msgstr[0] "Kiválasztott modell törlése" #~ msgstr[1] "Kiválasztott modellek törlése" #~ msgctxt "@action:inmenu menubar:edit" #~ msgid "Center Selected Model" #~ msgid_plural "Center Selected Models" #~ msgstr[0] "A kijelölt modellt középre" #~ msgstr[1] "A kijelölt modelleket középre" #~ msgctxt "@action:inmenu menubar:edit" #~ msgid "Multiply Selected Model" #~ msgid_plural "Multiply Selected Models" #~ msgstr[0] "A kijelölt modell többszörözése" #~ msgstr[1] "A kijelölt modellek többszörözése" #~ msgctxt "@button" #~ msgid "Finish" #~ msgstr "Befejezés" #~ msgctxt "@text" #~ msgid "" #~ "Please follow these steps to set up\n" #~ "Ultimaker Cura. This will only take a few moments." #~ msgstr "" #~ "Kéjük, kövesd a következő lépéseket\n" #~ "az Ultimaker Cura beállításához. Pár pillanat az egész." #~ msgctxt "@label" #~ msgid "What's new in Ultimaker Cura" #~ msgstr "Újdonságok az Ultimaker Cura-ban" #~ msgctxt "@info:status" #~ msgid "The selected model was too small to load." #~ msgstr "A kiválasztott tárgy túl kicsi volt a betöltéshez." #~ msgctxt "@info:status" #~ msgid "Successfully imported profile {0}" #~ msgstr "Sikeres profil importálás {0}" #~ msgctxt "@info:status" #~ msgid "Could not find a quality type {0} for the current configuration." #~ msgstr "Nem található a (z) {0} minőségi típus az aktuális konfigurációhoz." #~ msgctxt "@action:ComboBox option" #~ msgid "Update" #~ msgstr "Frissítés" #~ msgctxt "@action:ComboBox option" #~ msgid "Create new" #~ msgstr "Új létrehozása" #~ msgctxt "@info" #~ msgid "The webcam is not available because you are monitoring a cloud printer." #~ msgstr "A webkamera nem érhető el, mert felhőben lévő nyomtatót szeretne figyelni." #~ msgctxt "@text" #~ msgid "Please give your printer a name" #~ msgstr "Adja meg a nyomtató nevét" #~ msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" #~ msgid "New features are available for your {machine_name}! It is recommended to update the firmware on your printer." #~ msgstr "Új funkciók érhetők el a (z) {machine_name} készülékken! Javasoljuk, hogy frissítse a nyomtató firmware-jét." #~ msgctxt "@action:button" #~ msgid "Print via Cloud" #~ msgstr "Nyomtatás felhőn keresztül" #~ msgctxt "@properties:tooltip" #~ msgid "Print via Cloud" #~ msgstr "Nyomtatás felhőn keresztül" #~ msgctxt "@info:status" #~ msgid "Connected via Cloud" #~ msgstr "Csatlakozás felhőn keresztül" #~ msgctxt "@info:status Ultimaker Cloud should not be translated." #~ msgid "Connect to Ultimaker Cloud" #~ msgstr "Csatlakozás az Ultimaker felhőhöz" #~ msgctxt "@label" #~ msgid "You need to install the package before you can rate" #~ msgstr "Mielőtt értékelni tudná, telepítenie kell a csomagot" #~ msgctxt "@label" #~ msgid "ratings" #~ msgstr "értékelés" #~ msgctxt "@label" #~ msgid "Featured" #~ msgstr "Kiemelt" #~ msgctxt "@label" #~ msgid "Your rating" #~ msgstr "Értékelésed" #~ msgctxt "@label" #~ msgid "Author" #~ msgstr "Szerző" #~ msgctxt "@label The argument is a username." #~ msgid "Hi %1" #~ msgstr "Szia %1" #~ msgctxt "@button" #~ msgid "Ultimaker account" #~ msgstr "Ultimaker fiók" #~ msgctxt "@button" #~ msgid "Sign out" #~ msgstr "Kijelentkezés" #~ msgctxt "@label" #~ msgid "Support library for analysis of complex networks" #~ msgstr "Támogató könyvtár a komplex hálózatok elemzéséhez" #~ msgctxt "@Label" #~ msgid "Python HTTP library" #~ msgstr "Python HTTP könyvtár" #~ msgctxt "@text:window" #~ msgid "" #~ "You have customized some profile settings.\n" #~ "Would you like to keep or discard those settings?" #~ msgstr "" #~ "Van néhány testreszabott beállításod a profilban. \n" #~ "Szeretnéd ezeket megtartani, vagy eldobod őket?" #~ msgctxt "@title:column" #~ msgid "Default" #~ msgstr "Alapértelmezett" #~ msgctxt "@title:column" #~ msgid "Customized" #~ msgstr "Testreszabott" #~ msgctxt "@action:button" #~ msgid "Discard" #~ msgstr "Eldob" #~ msgctxt "@action:button" #~ msgid "Keep" #~ msgstr "Megtart" #~ msgctxt "@action:button" #~ msgid "Create New Profile" #~ msgstr "Új profil létrehozás" #~ msgctxt "@title:menu menubar:file" #~ msgid "&Save..." #~ msgstr "Mentés..." #~ msgctxt "@text" #~ msgid "Place enter your printer's IP address." #~ msgstr "Írja be a nyomtató IP címét." #~ msgctxt "@button" #~ msgid "Create an account" #~ msgstr "Fiók létrehozása" #~ msgctxt "@item:inmenu" #~ msgid "Flatten active settings" #~ msgstr "Aktív beállítások simítása" #~ msgctxt "@info:status" #~ msgid "Profile has been flattened & activated." #~ msgstr "A profil simítva és aktiválva." #~ msgctxt "X3g Writer Plugin Description" #~ msgid "Writes X3g to files" #~ msgstr "Írás X3g fájlba" #~ msgctxt "X3g Writer File Description" #~ msgid "X3g File" #~ msgstr "X3g fájl" #~ msgctxt "X3G Writer File Description" #~ msgid "X3G File" #~ msgstr "X3g fájl" #~ msgctxt "@info:status" #~ msgid "Cura does not accurately display layers when Wire Printing is enabled" #~ msgstr "A Cura nem jeleníti meg pontosan a rétegeket, ha a huzalnyomtatás engedélyezve van" #~ msgctxt "@item:inlistbox" #~ msgid "Open Compressed Triangle Mesh" #~ msgstr "Tömörített háromszög háló megnyitása" #~ msgctxt "@info:status" #~ msgid "Nothing to slice because none of the models fit the build volume or are assigned to a disabled extruder. Please scale or rotate models to fit, or enable an extruder." #~ msgstr "Nem lehet szeletelni, mert egyik modell sem érintkezik az alapsíkkal, vagy a modell letiltott extruderhez van hozzárendelve. Kérjük, méretezze vagy forgassa el a modelleket, hogy illeszkedjenek az alapsíkra, vagy engedélyezz egy extrudert." #~ msgctxt "@info:backup_status" #~ msgid "There was an error listing your backups." #~ msgstr "Hiba történt a biztonsági mentések listázásánál." #~ msgctxt "@item:inmenu" #~ msgid "Profile Assistant" #~ msgstr "Profil segéd" #~ msgctxt "@item:inlistbox" #~ msgid "Profile Assistant" #~ msgstr "Profil segéd" #~ msgctxt "@label" #~ msgid "Pre-sliced file {0}" #~ msgstr "Elő szeletelt fájl {0}" #~ msgctxt "@action:button" #~ msgid "Retry" #~ msgstr "Újra" #~ msgctxt "@title:groupbox" #~ msgid "User description (Note: Developers may not speak your language, please use English if possible)" #~ msgstr "Felhasználói leírás (Megjegyzés: Lehet, hogy a fejlesztők nem beszélnek az Ön nyelvén,ezért kérjük, használja az Angol nyelvet, ha lehetséges.)" #~ msgctxt "@label" #~ msgid "Confirm" #~ msgstr "Jóváhagy" #~ msgctxt "@info:button" #~ msgid "Quit Cura" #~ msgstr "Kilépés a Cura-ból" #~ msgctxt "@label" #~ msgid "" #~ "This plugin contains a license.\n" #~ "You need to accept this license to install this plugin.\n" #~ "Do you agree with the terms below?" #~ msgstr "" #~ "A bővítmény telepítéséhez el kell fogadnia ezt a licencet. \n" #~ "Egyetért az alábbi feltételekkel?" #~ msgctxt "@action:button" #~ msgid "Accept" #~ msgstr "Elfogad" #~ msgctxt "@action:button" #~ msgid "Decline" #~ msgstr "Elutasít" #~ msgctxt "@label:table_header" #~ msgid "Print Core" #~ msgstr "Nyomtató motor" #~ msgctxt "@label:listbox" #~ msgid "Feedrate" #~ msgstr "Előtolás" #~ msgctxt "@info:tooltip" #~ msgid "Change active post-processing scripts" #~ msgstr "Állítsd aktívra az utó művelet szkriptet" #~ msgctxt "@label" #~ msgid "Don't support overlap with other models" #~ msgstr "Nem támogatott az egyéb modellekkel való átfedés" #~ msgctxt "@label" #~ msgid "Modify settings for overlap with other models" #~ msgstr "Módosítsa az egyéb modellekkel való átfedés beállítását" #~ msgctxt "@label" #~ msgid "Modify settings for infill of other models" #~ msgstr "Módosítsa a többi modell kitöltés beállításait" #~ msgctxt "@action:ComboBox option" #~ msgid "Update existing" #~ msgstr "Meglévő frissítése" #~ msgctxt "@label" #~ msgid "Not supported" #~ msgstr "Nem támogatott" #~ msgctxt "@action:button" #~ msgid "Previous" #~ msgstr "Előző" #~ msgctxt "@label" #~ msgid "Tip" #~ msgstr "Tipp" #~ msgctxt "@label" #~ msgid "Print experiment" #~ msgstr "Nyomtatási kísérlet" #~ msgctxt "@label" #~ msgid "Checklist" #~ msgstr "Ellenőrző lista" #~ msgctxt "@label" #~ msgid "Please select any upgrades made to this Ultimaker 2." #~ msgstr "Kérjük, válassza ki az Ultimaker 2 frissítéseit." #~ msgctxt "@label" #~ msgid "Olsson Block" #~ msgstr "Olsson blokk" #~ msgctxt "@label" #~ msgid "Language:" #~ msgstr "Nyelv:" #~ msgctxt "@window:text" #~ msgid "Camera rendering: " #~ msgstr "Kamera megjelenítés: " #~ msgctxt "@info:tooltip" #~ msgid "Use multi build plate functionality" #~ msgstr "Többrétegű tárgyasztal használata" #~ msgctxt "@option:check" #~ msgid "Use multi build plate functionality (restart required)" #~ msgstr "Többrétegű tárgyasztal használata (újraindítás szükséges)" #~ msgctxt "@label" #~ msgid "Default profiles" #~ msgstr "Alapértelemezett profil" #~ msgctxt "@label:textbox" #~ msgid "search settings" #~ msgstr "keresési beállítások" #~ msgctxt "@label" #~ msgid "The value is resolved from per-extruder values " #~ msgstr "Az értékek meghatározása az extruderek értékei alapján történik " #~ msgctxt "@label" #~ msgid "Layer Height" #~ msgstr "Réteg magasság" #~ msgctxt "@tooltip" #~ msgid "This quality profile is not available for your current material and nozzle configuration. Please change these to enable this quality profile." #~ msgstr "Ez a minőségi profil nem áll rendelkezésre a jelenlegi anyag- és fúvóka-konfigurációhoz. Kérjük, módosítsa ezeket a minőségprofil engedélyezéséhez." #~ msgctxt "@tooltip" #~ msgid "A custom profile is currently active. To enable the quality slider, choose a default quality profile in Custom tab" #~ msgstr "Az egyéni profil jelenleg aktív. A minőségi csúszka engedélyezéséhez válassza az alapértelmezett minőségi profilt az Egyéni lapon" #~ msgctxt "@title:menu" #~ msgid "&Build plate" #~ msgstr "&Tárgyasztal" #~ msgctxt "@title:settings" #~ msgid "&Profile" #~ msgstr "&Profil" #~ msgctxt "@action:inmenu" #~ msgid "Show All Settings" #~ msgstr "Minden beállítást mutat" #~ msgctxt "@title:menu menubar:file" #~ msgid "Export..." #~ msgstr "&Exportál..." #~ msgctxt "@label" #~ msgid "The next generation 3D printing workflow" #~ msgstr "A következő generációs 3D nyomtatási munkafolyamat" #~ msgctxt "@text" #~ msgid "" #~ "- Send print jobs to Ultimaker printers outside your local network\n" #~ "- Store your Ultimaker Cura settings in the cloud for use anywhere\n" #~ "- Get exclusive access to print profiles from leading brands" #~ msgstr "" #~ "- Nyomtatási feladatok küldése Ultimaker nyomtatóknak helyi hálózaton kívülről\n" #~ "- Tárolja az Ultimaker Cura beállításait felhőben, így az bárhonnan elérhető lesz\n" #~ "- Exklúzív hozzáférés a vezető nyomtató márkák nyomtatási profiljaikhoz" #~ msgctxt "@title:window" #~ msgid "Ultimaker Cura" #~ msgstr "Ultimaker Cura" #~ msgctxt "@title:window" #~ msgid "Closing Cura" #~ msgstr "Cura bezárása" #~ msgctxt "@label" #~ msgid "Are you sure you want to exit Cura?" #~ msgstr "Biztos, hogy kilépsz a Cura -ból?" #~ msgctxt "@title:window" #~ msgid "About Cura" #~ msgstr "A Cura -ról" #~ msgctxt "@action:label" #~ msgid "Build plate" #~ msgstr "Tárgyasztal" #~ msgctxt "@label" #~ msgid "Ultimaker Cloud" #~ msgstr "Ultimaker felhő" #~ msgctxt "@text" #~ msgid "The next generation 3D printing workflow" #~ msgstr "Következő generációs 3D nyomtatási munkafolyamat" #~ msgctxt "@text" #~ msgid "- Send print jobs to Ultimaker printers outside your local network" #~ msgstr "- Küldjön nyomtatási feladatokat az Ultimaker nyomtatóknak a helyi hálózaton kívülről" #~ msgctxt "@text" #~ msgid "- Store your Ultimaker Cura settings in the cloud for use anywhere" #~ msgstr "- Tárolja az Ultimaker Cura beállításait a felhőben így azok bárhol használhatóak" #~ msgctxt "@text" #~ msgid "- Get exclusive access to print profiles from leading brands" #~ msgstr "- Exkluzív hozzáférés a vezető márkák nyomtatási profiljaihoz" #~ msgctxt "name" #~ msgid "Machine Settings action" #~ msgstr "Gépbeállítások művelete" #~ msgctxt "description" #~ msgid "Dump the contents of all settings to a HTML file." #~ msgstr "Az összes beállítás tartalmát HTML-fájlba teheti." #~ msgctxt "name" #~ msgid "God Mode" #~ msgstr "Isten mód" #~ msgctxt "description" #~ msgid "Create a flattened quality changes profile." #~ msgstr "Hozzon létre egy simított tulajdonságú profilt." #~ msgctxt "name" #~ msgid "Profile Flattener" #~ msgstr "Profil simító" #~ msgctxt "description" #~ msgid "Allows material manufacturers to create new material and quality profiles using a drop-in UI." #~ msgstr "Lehetővé teszi az anyaggyártók számára, hogy új anyag- és minőségi profilokat hozzanak létre egy beépülő felhasználói felület használatával." #~ msgctxt "name" #~ msgid "Print Profile Assistant" #~ msgstr "Nyomtatási profil-asszisztens"