# Cura # Copyright (C) 2022 UltiMaker. # This file is distributed under the same license as the Cura package. # Ultimaker , 2022. # msgid "" msgstr "" "Project-Id-Version: Cura 5.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: 2022-07-15 10:53+0200\n" "Last-Translator: Bothof \n" "Language-Team: Finnish\n" "Language: fi_FI\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Poedit 3.1.1\n" #: cura/API/Account.py:199 msgctxt "@info:title" msgid "Login failed" msgstr "" #: cura/Arranging/ArrangeObjectsJob.py:25 msgctxt "@info:status" msgid "Finding new location for objects" msgstr "Uusien paikkojen etsiminen kappaleille" #: cura/Arranging/ArrangeObjectsJob.py:29 msgctxt "@info:title" msgid "Finding Location" msgstr "Etsitään paikkaa" #: cura/Arranging/ArrangeObjectsJob.py:42 cura/MultiplyObjectsJob.py:99 msgctxt "@info:status" msgid "Unable to find a location within the build volume for all objects" msgstr "Kaikille kappaleille ei löydy paikkaa tulostustilavuudessa" #: cura/Arranging/ArrangeObjectsJob.py:43 msgctxt "@info:title" msgid "Can't Find Location" msgstr "Paikkaa ei löydy" #: cura/Backups/Backup.py:115 msgctxt "@info:backup_failed" msgid "Could not create archive from user data directory: {}" msgstr "" #: cura/Backups/Backup.py:122 cura/Backups/Backup.py:159 #: plugins/CuraDrive/src/DrivePluginExtension.py:118 #: plugins/CuraDrive/src/DrivePluginExtension.py:126 msgctxt "@info:title" msgid "Backup" msgstr "" #: cura/Backups/Backup.py:134 msgctxt "@info:backup_failed" msgid "Tried to restore a Cura backup without having proper data or meta data." msgstr "" #: cura/Backups/Backup.py:145 msgctxt "@info:backup_failed" msgid "Tried to restore a Cura backup that is higher than the current version." msgstr "" #: cura/Backups/Backup.py:158 msgctxt "@info:backup_failed" msgid "The following error occurred while trying to restore a Cura backup:" msgstr "" #: cura/BuildVolume.py:100 msgctxt "@info:status" msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models." msgstr "Tulostustilavuuden korkeutta on vähennetty tulostusjärjestysasetuksen vuoksi, jotta koroke ei osuisi tulostettuihin malleihin." #: cura/BuildVolume.py:103 msgctxt "@info:title" msgid "Build Volume" msgstr "Tulostustilavuus" #: cura/CrashHandler.py:107 msgctxt "@title:window" msgid "Cura can't start" msgstr "" #: cura/CrashHandler.py:113 msgctxt "@label crash message" msgid "" "

Oops, UltiMaker Cura has encountered something that doesn't seem right.

\n" "

We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.

\n" "

Backups can be found in the configuration folder.

\n" "

Please send us this Crash Report to fix the problem.

\n" " " msgstr "" #: cura/CrashHandler.py:122 msgctxt "@action:button" msgid "Send crash report to UltiMaker" msgstr "" #: cura/CrashHandler.py:125 msgctxt "@action:button" msgid "Show detailed crash report" msgstr "" #: cura/CrashHandler.py:129 msgctxt "@action:button" msgid "Show configuration folder" msgstr "" #: cura/CrashHandler.py:140 msgctxt "@action:button" msgid "Backup and Reset Configuration" msgstr "" #: cura/CrashHandler.py:171 msgctxt "@title:window" msgid "Crash Report" msgstr "Kaatumisraportti" #: cura/CrashHandler.py:190 msgctxt "@label crash message" msgid "" "

A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem

\n" "

Please use the \"Send report\" button to post a bug report automatically to our servers

\n" " " msgstr "" #: cura/CrashHandler.py:198 msgctxt "@title:groupbox" msgid "System information" msgstr "" #: cura/CrashHandler.py:207 msgctxt "@label unknown version of Cura" msgid "Unknown" msgstr "" #: cura/CrashHandler.py:228 msgctxt "@label Cura version number" msgid "Cura version" msgstr "" #: cura/CrashHandler.py:229 msgctxt "@label" msgid "Cura language" msgstr "" #: cura/CrashHandler.py:230 msgctxt "@label" msgid "OS language" msgstr "" #: cura/CrashHandler.py:231 msgctxt "@label Type of platform" msgid "Platform" msgstr "" #: cura/CrashHandler.py:232 msgctxt "@label" msgid "Qt version" msgstr "" #: cura/CrashHandler.py:233 msgctxt "@label" msgid "PyQt version" msgstr "" #: cura/CrashHandler.py:234 msgctxt "@label OpenGL version" msgid "OpenGL" msgstr "" #: cura/CrashHandler.py:264 msgctxt "@label" msgid "Not yet initialized" msgstr "" #: cura/CrashHandler.py:267 #, python-brace-format msgctxt "@label OpenGL version" msgid "
  • OpenGL Version: {version}
    • " msgstr "" #: cura/CrashHandler.py:268 #, python-brace-format msgctxt "@label OpenGL vendor" msgid "
  • OpenGL Vendor: {vendor}
    • " msgstr "" #: cura/CrashHandler.py:269 #, python-brace-format msgctxt "@label OpenGL renderer" msgid "
  • OpenGL Renderer: {renderer}
    • " msgstr "" #: cura/CrashHandler.py:304 msgctxt "@title:groupbox" msgid "Error traceback" msgstr "" #: cura/CrashHandler.py:390 msgctxt "@title:groupbox" msgid "Logs" msgstr "" #: cura/CrashHandler.py:418 msgctxt "@action:button" msgid "Send report" msgstr "" #: cura/CuraApplication.py:540 msgctxt "@info:progress" msgid "Loading machines..." msgstr "Ladataan laitteita..." #: cura/CuraApplication.py:547 msgctxt "@info:progress" msgid "Setting up preferences..." msgstr "" #: cura/CuraApplication.py:692 msgctxt "@info:progress" msgid "Initializing Active Machine..." msgstr "" #: cura/CuraApplication.py:839 msgctxt "@info:progress" msgid "Initializing machine manager..." msgstr "" #: cura/CuraApplication.py:853 msgctxt "@info:progress" msgid "Initializing build volume..." msgstr "" #: cura/CuraApplication.py:921 msgctxt "@info:progress" msgid "Setting up scene..." msgstr "Asetetaan näkymää..." #: cura/CuraApplication.py:957 msgctxt "@info:progress" msgid "Loading interface..." msgstr "Ladataan käyttöliittymää..." #: cura/CuraApplication.py:962 msgctxt "@info:progress" msgid "Initializing engine..." msgstr "" #: cura/CuraApplication.py:1290 #, python-format msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm." msgid "%(width).1f x %(depth).1f x %(height).1f mm" msgstr "%(width).1f x %(depth).1f x %(height).1f mm" #: cura/CuraApplication.py:1816 #, python-brace-format msgctxt "@info:status" msgid "Only one G-code file can be loaded at a time. Skipped importing {0}" msgstr "Vain yksi G-code-tiedosto voidaan ladata kerralla. Tiedoston {0} tuonti ohitettiin." #: cura/CuraApplication.py:1818 cura/OAuth2/AuthorizationService.py:217 #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:189 msgctxt "@info:title" msgid "Warning" msgstr "Varoitus" #: cura/CuraApplication.py:1828 #, python-brace-format msgctxt "@info:status" msgid "Can't open any other file if G-code is loading. Skipped importing {0}" msgstr "Muita tiedostoja ei voida ladata, kun G-code latautuu. Tiedoston {0} tuonti ohitettiin." #: cura/CuraApplication.py:1830 cura/Settings/CuraContainerRegistry.py:156 #: cura/Settings/CuraContainerRegistry.py:166 #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173 msgctxt "@info:title" msgid "Error" msgstr "Virhe" #: cura/Machines/Models/DiscoveredPrintersModel.py:83 msgctxt "@label" msgid "Unknown" msgstr "Tuntematon" #: cura/Machines/Models/DiscoveredPrintersModel.py:113 msgctxt "@label" msgid "The printer(s) below cannot be connected because they are part of a group" msgstr "" #: cura/Machines/Models/DiscoveredPrintersModel.py:115 msgctxt "@label" msgid "Available networked printers" msgstr "" #: cura/Machines/Models/ExtrudersModel.py:219 msgctxt "@menuitem" msgid "Not overridden" msgstr "" #: cura/Machines/Models/GlobalStacksModel.py:160 #: resources/qml/PrinterSelector/MachineSelectorList.qml:28 msgctxt "@label" msgid "Connected printers" msgstr "" #: cura/Machines/Models/GlobalStacksModel.py:160 msgctxt "@label" msgid "Preset printers" msgstr "" #: cura/Machines/Models/GlobalStacksModel.py:165 #, python-brace-format msgctxt "@label {0} is the name of a printer that's about to be deleted." msgid "Are you sure you wish to remove {0}? This cannot be undone!" msgstr "" #: cura/Machines/Models/IntentCategoryModel.py:42 #: cura/Machines/Models/IntentSelectionModel.py:61 #: cura/Machines/Models/IntentTranslations.py:11 #: cura/Machines/Models/QualityManagementModel.py:347 msgctxt "@label" msgid "Default" msgstr "" #: cura/Machines/Models/IntentCategoryModel.py:45 #: cura/Machines/Models/IntentSelectionModel.py:65 #: cura/Machines/Models/IntentTranslations.py:14 msgctxt "@label" msgid "Visual" msgstr "" #: cura/Machines/Models/IntentCategoryModel.py:46 #: cura/Machines/Models/IntentSelectionModel.py:66 #: cura/Machines/Models/IntentTranslations.py:15 msgctxt "@text" msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality." msgstr "" #: cura/Machines/Models/IntentCategoryModel.py:49 #: cura/Machines/Models/IntentSelectionModel.py:70 #: cura/Machines/Models/IntentTranslations.py:18 msgctxt "@label" msgid "Engineering" msgstr "" #: cura/Machines/Models/IntentCategoryModel.py:50 #: cura/Machines/Models/IntentSelectionModel.py:71 #: cura/Machines/Models/IntentTranslations.py:19 msgctxt "@text" msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances." msgstr "" #: cura/Machines/Models/IntentCategoryModel.py:53 #: cura/Machines/Models/IntentSelectionModel.py:75 #: cura/Machines/Models/IntentTranslations.py:22 msgctxt "@label" msgid "Draft" msgstr "" #: cura/Machines/Models/IntentCategoryModel.py:54 #: cura/Machines/Models/IntentSelectionModel.py:76 #: cura/Machines/Models/IntentTranslations.py:23 msgctxt "@text" msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction." msgstr "" #: cura/Machines/Models/MaterialManagementModel.py:232 msgctxt "@label" msgid "Custom Material" msgstr "Mukautettu materiaali" #: cura/Machines/Models/MaterialManagementModel.py:233 #: resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:340 msgctxt "@label" msgid "Custom" msgstr "Mukautettu" #: cura/Machines/Models/QualityManagementModel.py:400 msgctxt "@label" msgid "Custom profiles" msgstr "Mukautetut profiilit" #: cura/Machines/Models/QualityManagementModel.py:435 #, python-brace-format msgctxt "@item:inlistbox" msgid "All Supported Types ({0})" msgstr "" #: cura/Machines/Models/QualityManagementModel.py:436 msgctxt "@item:inlistbox" msgid "All Files (*)" msgstr "" #: cura/Machines/Models/QualitySettingsModel.py:182 msgctxt "@info:status" msgid "Calculated" msgstr "Laskettu" #: cura/MultiplyObjectsJob.py:30 msgctxt "@info:status" msgid "Multiplying and placing objects" msgstr "Kappaleiden kertominen ja sijoittelu" #: cura/MultiplyObjectsJob.py:32 msgctxt "@info:title" msgid "Placing Objects" msgstr "" #: cura/MultiplyObjectsJob.py:100 msgctxt "@info:title" msgid "Placing Object" msgstr "Sijoitetaan kappaletta" #: cura/OAuth2/AuthorizationHelpers.py:89 msgctxt "@message" msgid "Could not read response." msgstr "" #: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "" #: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "" #: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "" #: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "" #: cura/OAuth2/AuthorizationService.py:216 msgctxt "@info" msgid "Unable to start a new sign in process. Check if another sign in attempt is still active." msgstr "" #: cura/OAuth2/AuthorizationService.py:277 msgctxt "@info" msgid "Unable to reach the UltiMaker account server." msgstr "" #: cura/OAuth2/AuthorizationService.py:278 msgctxt "@info:title" msgid "Log-in failed" msgstr "" #: cura/PrinterOutput/UploadMaterialsJob.py:104 msgctxt "@text:error" msgid "Failed to create archive of materials to sync with printers." msgstr "" #: cura/PrinterOutput/UploadMaterialsJob.py:111 #: cura/PrinterOutput/UploadMaterialsJob.py:165 msgctxt "@text:error" msgid "Failed to load the archive of materials to sync it with printers." msgstr "" #: cura/PrinterOutput/UploadMaterialsJob.py:143 msgctxt "@text:error" msgid "The response from Digital Factory appears to be corrupted." msgstr "" #: cura/PrinterOutput/UploadMaterialsJob.py:147 #: cura/PrinterOutput/UploadMaterialsJob.py:151 #: cura/PrinterOutput/UploadMaterialsJob.py:155 msgctxt "@text:error" msgid "The response from Digital Factory is missing important information." msgstr "" #: cura/PrinterOutput/UploadMaterialsJob.py:218 msgctxt "@text:error" msgid "Failed to connect to Digital Factory to sync materials with some of the printers." msgstr "" #: cura/PrinterOutput/UploadMaterialsJob.py:232 msgctxt "@text:error" msgid "Failed to connect to Digital Factory." msgstr "" #: cura/Settings/ActiveQuality.py:43 msgctxt "@label" msgid "Experimental" msgstr "" #: cura/Settings/ContainerManager.py:207 #: cura/Settings/CuraContainerRegistry.py:140 msgctxt "@title:window" msgid "File Already Exists" msgstr "Tiedosto on jo olemassa" #: cura/Settings/ContainerManager.py:208 #: cura/Settings/CuraContainerRegistry.py:141 #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" msgstr "Tiedosto {0} on jo olemassa. Haluatko varmasti kirjoittaa sen päälle?" #: cura/Settings/ContainerManager.py:459 cura/Settings/ContainerManager.py:462 msgctxt "@info:status" msgid "Invalid file URL:" msgstr "" #: cura/Settings/CuraContainerRegistry.py:153 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to export profile to {0}: {1}" msgstr "Profiilin vienti epäonnistui tiedostoon {0}: {1}" #: cura/Settings/CuraContainerRegistry.py:163 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to export profile to {0}: Writer plugin reported failure." msgstr "Profiilin vienti epäonnistui tiedostoon {0}: Kirjoitin-lisäosa ilmoitti virheestä." #: cura/Settings/CuraContainerRegistry.py:171 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Exported profile to {0}" msgstr "Profiili viety tiedostoon {0}" #: cura/Settings/CuraContainerRegistry.py:173 msgctxt "@info:title" msgid "Export succeeded" msgstr "" #: cura/Settings/CuraContainerRegistry.py:205 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}: {1}" msgstr "" #: cura/Settings/CuraContainerRegistry.py:209 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Can't import profile from {0} before a printer is added." msgstr "" #: cura/Settings/CuraContainerRegistry.py:224 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "No custom profile to import in file {0}" msgstr "" #: cura/Settings/CuraContainerRegistry.py:228 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}:" msgstr "" #: cura/Settings/CuraContainerRegistry.py:252 #: cura/Settings/CuraContainerRegistry.py:262 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "This profile {0} contains incorrect data, could not import it." msgstr "" #: cura/Settings/CuraContainerRegistry.py:355 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to import profile from {0}:" msgstr "" #: cura/Settings/CuraContainerRegistry.py:359 #, python-brace-format msgctxt "@info:status" msgid "Successfully imported profile {0}." msgstr "" #: cura/Settings/CuraContainerRegistry.py:366 #, python-brace-format msgctxt "@info:status" msgid "File {0} does not contain any valid profile." msgstr "" #: cura/Settings/CuraContainerRegistry.py:369 #, python-brace-format msgctxt "@info:status" msgid "Profile {0} has an unknown file type or is corrupted." msgstr "Profiililla {0} on tuntematon tiedostotyyppi tai se on vioittunut." #: cura/Settings/CuraContainerRegistry.py:443 msgctxt "@label" msgid "Custom profile" msgstr "Mukautettu profiili" #: cura/Settings/CuraContainerRegistry.py:459 msgctxt "@info:status" msgid "Profile is missing a quality type." msgstr "Profiilista puuttuu laatutyyppi." #: cura/Settings/CuraContainerRegistry.py:463 msgctxt "@info:status" msgid "There is no active printer yet." msgstr "" #: cura/Settings/CuraContainerRegistry.py:469 msgctxt "@info:status" msgid "Unable to add the profile." msgstr "" #: cura/Settings/CuraContainerRegistry.py:483 #, python-brace-format msgctxt "@info:status" msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'." msgstr "" #: cura/Settings/CuraContainerRegistry.py:488 #, python-brace-format msgctxt "@info:status" msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type." msgstr "" #: cura/Settings/MachineManager.py:746 #: plugins/3MFReader/ThreeMFWorkspaceReader.py:221 msgctxt "@label" msgid "Nozzle" msgstr "Suutin" #: cura/Settings/MachineManager.py:890 msgctxt "@info:message Followed by a list of settings." msgid "Settings have been changed to match the current availability of extruders:" msgstr "" #: cura/Settings/MachineManager.py:891 msgctxt "@info:title" msgid "Settings updated" msgstr "" #: cura/Settings/MachineManager.py:1514 msgctxt "@info:title" msgid "Extruder(s) Disabled" msgstr "" #: cura/Settings/cura_empty_instance_containers.py:36 msgctxt "@info:not supported profile" msgid "Not supported" msgstr "" #: cura/Settings/cura_empty_instance_containers.py:55 msgctxt "@info:No intent profile selected" msgid "Default" msgstr "" #: cura/UI/AddPrinterPagesModel.py:17 #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61 msgctxt "@action:button" msgid "Add" msgstr "Lisää" #: cura/UI/AddPrinterPagesModel.py:26 cura/UI/WelcomePagesModel.py:290 msgctxt "@action:button" msgid "Finish" msgstr "" #: cura/UI/AddPrinterPagesModel.py:33 plugins/3MFReader/WorkspaceDialog.qml:386 #: plugins/ImageReader/ConfigUI.qml:323 #: plugins/SliceInfoPlugin/MoreInfoWindow.qml:147 #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27 #: plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43 #: resources/qml/ColorDialog.qml:143 #: resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59 #: resources/qml/Dialogs/RenameDialog.qml:103 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293 msgctxt "@action:button" msgid "Cancel" msgstr "Peruuta" #: cura/UI/ObjectsModel.py:69 #, python-brace-format msgctxt "@label" msgid "Group #{group_nr}" msgstr "" #: cura/UI/PrintInformation.py:87 msgctxt "@tooltip" msgid "Outer Wall" msgstr "Ulkoseinämä" #: cura/UI/PrintInformation.py:88 msgctxt "@tooltip" msgid "Inner Walls" msgstr "Sisäseinämät" #: cura/UI/PrintInformation.py:89 msgctxt "@tooltip" msgid "Skin" msgstr "Pintakalvo" #: cura/UI/PrintInformation.py:90 msgctxt "@tooltip" msgid "Infill" msgstr "Täyttö" #: cura/UI/PrintInformation.py:91 msgctxt "@tooltip" msgid "Support Infill" msgstr "Tuen täyttö" #: cura/UI/PrintInformation.py:92 msgctxt "@tooltip" msgid "Support Interface" msgstr "Tukiliittymä" #: cura/UI/PrintInformation.py:93 msgctxt "@tooltip" msgid "Support" msgstr "Tuki" #: cura/UI/PrintInformation.py:94 msgctxt "@tooltip" msgid "Skirt" msgstr "Helma" #: cura/UI/PrintInformation.py:95 msgctxt "@tooltip" msgid "Prime Tower" msgstr "" #: cura/UI/PrintInformation.py:96 msgctxt "@tooltip" msgid "Travel" msgstr "Siirtoliike" #: cura/UI/PrintInformation.py:97 msgctxt "@tooltip" msgid "Retractions" msgstr "Takaisinvedot" #: cura/UI/PrintInformation.py:98 msgctxt "@tooltip" msgid "Other" msgstr "Muu" #: cura/UI/TextManager.py:37 cura/UI/TextManager.py:63 msgctxt "@text:window" msgid "The release notes could not be opened." msgstr "" #: cura/UI/WelcomePagesModel.py:57 cura/UI/WelcomePagesModel.py:277 msgctxt "@action:button" msgid "Next" msgstr "" #: cura/UI/WelcomePagesModel.py:286 cura/UI/WhatsNewPagesModel.py:68 msgctxt "@action:button" msgid "Skip" msgstr "" #: cura/UI/WhatsNewPagesModel.py:76 #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:175 #: plugins/PerObjectSettingsTool/SettingPickDialog.qml:135 #: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:444 #: resources/qml/Dialogs/AboutDialog.qml:188 msgctxt "@action:button" msgid "Close" msgstr "Sulje" #: cura/UltimakerCloud/CloudMaterialSync.py:66 msgctxt "@action:button" msgid "Please sync the material profiles with your printers before starting to print." msgstr "" #: cura/UltimakerCloud/CloudMaterialSync.py:67 msgctxt "@action:button" msgid "New materials installed" msgstr "" #: cura/UltimakerCloud/CloudMaterialSync.py:74 msgctxt "@action:button" msgid "Sync materials" msgstr "" #: cura/UltimakerCloud/CloudMaterialSync.py:82 #: plugins/3MFReader/WorkspaceDialog.py:418 plugins/SolidView/SolidView.py:80 msgctxt "@action:button" msgid "Learn more" msgstr "" #: cura/UltimakerCloud/CloudMaterialSync.py:135 msgctxt "@message:text" msgid "Could not save material archive to {}:" msgstr "" #: cura/UltimakerCloud/CloudMaterialSync.py:136 msgctxt "@message:title" msgid "Failed to save material archive" msgstr "" #: cura/UltimakerCloud/CloudMaterialSync.py:188 msgctxt "@text" msgid "Unknown error." msgstr "" #: plugins/3MFReader/ThreeMFWorkspaceReader.py:558 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Project file {0} contains an unknown machine type {1}. Cannot import the machine. Models will be imported instead." msgstr "" #: plugins/3MFReader/ThreeMFWorkspaceReader.py:561 msgctxt "@info:title" msgid "Open Project File" msgstr "" #: plugins/3MFReader/ThreeMFWorkspaceReader.py:642 #: plugins/3MFReader/WorkspaceDialog.qml:99 #: plugins/3MFReader/WorkspaceDialog.qml:127 #: plugins/3MFReader/WorkspaceDialog.qml:134 msgctxt "@button" msgid "Create new" msgstr "Luo uusi" #: plugins/3MFReader/ThreeMFWorkspaceReader.py:692 #, python-brace-format msgctxt "@info:error Don't translate the XML tags or !" msgid "Project file {0} is suddenly inaccessible: {1}." msgstr "" #: plugins/3MFReader/ThreeMFWorkspaceReader.py:693 #: plugins/3MFReader/ThreeMFWorkspaceReader.py:701 #: plugins/3MFReader/ThreeMFWorkspaceReader.py:720 msgctxt "@info:title" msgid "Can't Open Project File" msgstr "" #: plugins/3MFReader/ThreeMFWorkspaceReader.py:700 #: plugins/3MFReader/ThreeMFWorkspaceReader.py:718 #, python-brace-format msgctxt "@info:error Don't translate the XML tags or !" msgid "Project file {0} is corrupt: {1}." msgstr "" #: plugins/3MFReader/ThreeMFWorkspaceReader.py:765 #, python-brace-format msgctxt "@info:error Don't translate the XML tag !" msgid "Project file {0} is made using profiles that are unknown to this version of UltiMaker Cura." msgstr "" #: plugins/3MFReader/WorkspaceDialog.py:233 msgctxt "@title:tab" msgid "Recommended" msgstr "Suositeltu" #: plugins/3MFReader/WorkspaceDialog.py:235 msgctxt "@title:tab" msgid "Custom" msgstr "Mukautettu" #: plugins/3MFReader/WorkspaceDialog.py:411 msgctxt "@info:status" msgid "The material used in this project relies on some material definitions not available in Cura, this might produce undesirable print results. We highly recommend installing the full material package from the Marketplace." msgstr "" #: plugins/3MFReader/WorkspaceDialog.py:413 msgctxt "@info:title" msgid "Material profiles not installed" msgstr "" #: plugins/3MFReader/WorkspaceDialog.py:426 msgctxt "@action:button" msgid "Install Materials" msgstr "" #: plugins/3MFReader/WorkspaceDialog.qml:15 msgctxt "@title:window" msgid "Open Project" msgstr "Avaa projekti" #: plugins/3MFReader/WorkspaceDialog.qml:31 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:61 msgctxt "@action:title" msgid "Summary - Cura Project" msgstr "Yhteenveto – Cura-projekti" #: plugins/3MFReader/WorkspaceDialog.qml:65 msgctxt "@action:ComboBox Update/override existing profile" msgid "Update existing" msgstr "" #: plugins/3MFReader/WorkspaceDialog.qml:66 msgctxt "@action:ComboBox Save settings in a new profile" msgid "Create new" msgstr "" #: plugins/3MFReader/WorkspaceDialog.qml:83 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97 msgctxt "@action:label" msgid "Printer settings" msgstr "Tulostimen asetukset" #: plugins/3MFReader/WorkspaceDialog.qml:92 #: plugins/3MFReader/WorkspaceRow.qml:23 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:106 msgctxt "@action:label" msgid "Type" msgstr "Tyyppi" #: plugins/3MFReader/WorkspaceDialog.qml:98 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121 msgctxt "@action:label" msgid "Printer Group" msgstr "" #: plugins/3MFReader/WorkspaceDialog.qml:103 msgctxt "@action:label" msgid "Open With" msgstr "" #: plugins/3MFReader/WorkspaceDialog.qml:104 msgctxt "@info:tooltip" msgid "Printer settings will be updated to match the settings saved with the project." msgstr "" #: plugins/3MFReader/WorkspaceDialog.qml:156 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:222 msgctxt "@action:label" msgid "Profile settings" msgstr "Profiilin asetukset" #: plugins/3MFReader/WorkspaceDialog.qml:166 #: plugins/3MFReader/WorkspaceDialog.qml:238 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:246 msgctxt "@action:label" msgid "Name" msgstr "Nimi" #: plugins/3MFReader/WorkspaceDialog.qml:172 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:263 msgctxt "@action:label" msgid "Intent" msgstr "" #: plugins/3MFReader/WorkspaceDialog.qml:178 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:230 msgctxt "@action:label" msgid "Not in profile" msgstr "Ei profiilissa" #: plugins/3MFReader/WorkspaceDialog.qml:179 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:235 msgctxt "@action:label" msgid "%1 override" msgid_plural "%1 overrides" msgstr[0] "%1 ohitus" msgstr[1] "%1 ohitusta" #: plugins/3MFReader/WorkspaceDialog.qml:185 msgctxt "@action:label" msgid "Derivative from" msgstr "Johdettu seuraavista" #: plugins/3MFReader/WorkspaceDialog.qml:186 msgctxt "@action:label" msgid "%1, %2 override" msgid_plural "%1, %2 overrides" msgstr[0] "%1, %2 ohitus" msgstr[1] "%1, %2 ohitusta" #: plugins/3MFReader/WorkspaceDialog.qml:226 msgctxt "@action:label" msgid "Material settings" msgstr "Materiaaliasetukset" #: plugins/3MFReader/WorkspaceDialog.qml:280 msgctxt "@action:label" msgid "Setting visibility" msgstr "Asetusten näkyvyys" #: plugins/3MFReader/WorkspaceDialog.qml:290 msgctxt "@action:label" msgid "Mode" msgstr "Tila" #: plugins/3MFReader/WorkspaceDialog.qml:296 msgctxt "@action:label" msgid "%1 out of %2" msgstr "%1/%2" #: plugins/3MFReader/WorkspaceDialog.qml:321 msgctxt "@action:warning" msgid "Loading a project will clear all models on the build plate." msgstr "" #: plugins/3MFReader/WorkspaceDialog.qml:367 msgctxt "@label" msgid "The material used in this project is currently not installed in Cura.
    Install the material profile and reopen the project." msgstr "" #: plugins/3MFReader/WorkspaceDialog.qml:392 msgctxt "@action:button" msgid "Open" msgstr "Avaa" #: plugins/3MFReader/WorkspaceDialog.qml:398 msgctxt "@action:button" msgid "Open project anyway" msgstr "" #: plugins/3MFReader/WorkspaceDialog.qml:407 msgctxt "@action:button" msgid "Install missing material" msgstr "" #: plugins/3MFReader/__init__.py:27 plugins/3MFReader/__init__.py:33 msgctxt "@item:inlistbox" msgid "3MF File" msgstr "3MF-tiedosto" #: plugins/3MFReader/plugin.json msgctxt "name" msgid "3MF Reader" msgstr "3MF-lukija" #: plugins/3MFReader/plugin.json msgctxt "description" msgid "Provides support for reading 3MF files." msgstr "Tukee 3MF-tiedostojen lukemista." #: plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31 msgctxt "@error:zip" msgid "3MF Writer plug-in is corrupt." msgstr "" #: plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37 msgctxt "@error" msgid "There is no workspace yet to write. Please add a printer first." msgstr "" #: plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64 #: plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97 msgctxt "@error:zip" msgid "No permission to write the workspace here." msgstr "" #: plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101 msgctxt "@error:zip" msgid "The operating system does not allow saving a project file to this location or with this file name." msgstr "" #: plugins/3MFWriter/ThreeMFWriter.py:240 msgctxt "@error:zip" msgid "Error writing 3mf file." msgstr "" #: plugins/3MFWriter/__init__.py:28 msgctxt "@item:inlistbox" msgid "3MF file" msgstr "3MF-tiedosto" #: plugins/3MFWriter/__init__.py:36 msgctxt "@item:inlistbox" msgid "Cura Project 3MF file" msgstr "Cura-projektin 3MF-tiedosto" #: plugins/3MFWriter/plugin.json msgctxt "name" msgid "3MF Writer" msgstr "3MF-kirjoitin" #: plugins/3MFWriter/plugin.json msgctxt "description" msgid "Provides support for writing 3MF files." msgstr "Tukee 3MF-tiedostojen kirjoittamista." #: plugins/AMFReader/__init__.py:15 msgctxt "@item:inlistbox" msgid "AMF File" msgstr "" #: plugins/AMFReader/plugin.json msgctxt "name" msgid "AMF Reader" msgstr "" #: plugins/AMFReader/plugin.json msgctxt "description" msgid "Provides support for reading AMF files." msgstr "" #: plugins/CuraDrive/plugin.json msgctxt "description" msgid "Backup and restore your configuration." msgstr "" #: plugins/CuraDrive/plugin.json msgctxt "name" msgid "Cura Backups" msgstr "" #: plugins/CuraDrive/src/CreateBackupJob.py:25 msgctxt "@info:title" msgid "Backups" msgstr "" #: plugins/CuraDrive/src/CreateBackupJob.py:26 msgctxt "@info:backup_status" msgid "There was an error while uploading your backup." msgstr "" #: plugins/CuraDrive/src/CreateBackupJob.py:46 msgctxt "@info:backup_status" msgid "Creating your backup..." msgstr "" #: plugins/CuraDrive/src/CreateBackupJob.py:55 msgctxt "@info:backup_status" msgid "There was an error while creating your backup." msgstr "" #: plugins/CuraDrive/src/CreateBackupJob.py:59 msgctxt "@info:backup_status" msgid "Uploading your backup..." msgstr "" #: plugins/CuraDrive/src/CreateBackupJob.py:69 msgctxt "@info:backup_status" msgid "Your backup has finished uploading." msgstr "" #: plugins/CuraDrive/src/CreateBackupJob.py:103 msgctxt "@error:file_size" msgid "The backup exceeds the maximum file size." msgstr "" #: plugins/CuraDrive/src/DriveApiService.py:86 #: plugins/CuraDrive/src/RestoreBackupJob.py:26 msgctxt "@info:backup_status" msgid "There was an error trying to restore your backup." msgstr "" #: plugins/CuraDrive/src/DrivePluginExtension.py:69 msgctxt "@item:inmenu" msgid "Manage backups" msgstr "" #: plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22 msgctxt "@button" msgid "Want more?" msgstr "" #: plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31 msgctxt "@button" msgid "Backup Now" msgstr "" #: plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43 msgctxt "@checkbox:description" msgid "Auto Backup" msgstr "" #: plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44 msgctxt "@checkbox:description" msgid "Automatically create a backup each day that Cura is started." msgstr "" #: plugins/CuraDrive/src/qml/components/BackupListItem.qml:64 msgctxt "@button" msgid "Restore" msgstr "" #: plugins/CuraDrive/src/qml/components/BackupListItem.qml:93 msgctxt "@dialog:title" msgid "Delete Backup" msgstr "" #: plugins/CuraDrive/src/qml/components/BackupListItem.qml:94 msgctxt "@dialog:info" msgid "Are you sure you want to delete this backup? This cannot be undone." msgstr "" #: plugins/CuraDrive/src/qml/components/BackupListItem.qml:102 msgctxt "@dialog:title" msgid "Restore Backup" msgstr "" #: plugins/CuraDrive/src/qml/components/BackupListItem.qml:103 msgctxt "@dialog:info" msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?" msgstr "" #: plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21 msgctxt "@backuplist:label" msgid "Cura Version" msgstr "" #: plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29 msgctxt "@backuplist:label" msgid "Machines" msgstr "" #: plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37 msgctxt "@backuplist:label" msgid "Materials" msgstr "" #: plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45 msgctxt "@backuplist:label" msgid "Profiles" msgstr "" #: plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53 msgctxt "@backuplist:label" msgid "Plugins" msgstr "" #: plugins/CuraDrive/src/qml/main.qml:25 msgctxt "@title:window" msgid "Cura Backups" msgstr "" #: plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28 msgctxt "@title" msgid "My Backups" msgstr "" #: plugins/CuraDrive/src/qml/pages/BackupsPage.qml:36 msgctxt "@empty_state" msgid "You don't have any backups currently. Use the 'Backup Now' button to create one." msgstr "" #: plugins/CuraDrive/src/qml/pages/BackupsPage.qml:55 msgctxt "@backup_limit_info" msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones." msgstr "" #: plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34 msgctxt "@description" msgid "Backup and synchronize your Cura settings." msgstr "" #: plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47 #: plugins/Marketplace/resources/qml/Marketplace.qml:312 #: resources/qml/Account/GeneralOperations.qml:49 #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:180 #: resources/qml/WelcomePages/CloudContent.qml:212 msgctxt "@button" msgid "Sign in" msgstr "" #: plugins/CuraEngineBackend/CuraEngineBackend.py:162 msgctxt "@message" msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker." msgstr "" #: plugins/CuraEngineBackend/CuraEngineBackend.py:163 msgctxt "@message:title" msgid "Slicing failed" msgstr "" #: plugins/CuraEngineBackend/CuraEngineBackend.py:168 msgctxt "@message:button" msgid "Report a bug" msgstr "" #: plugins/CuraEngineBackend/CuraEngineBackend.py:169 msgctxt "@message:description" msgid "Report a bug on UltiMaker Cura's issue tracker." msgstr "" #: plugins/CuraEngineBackend/CuraEngineBackend.py:416 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." msgstr "Viipalointi ei onnistu nykyisellä materiaalilla, sillä se ei sovellu käytettäväksi valitun laitteen tai kokoonpanon kanssa." #: plugins/CuraEngineBackend/CuraEngineBackend.py:417 #: plugins/CuraEngineBackend/CuraEngineBackend.py:450 #: plugins/CuraEngineBackend/CuraEngineBackend.py:477 #: plugins/CuraEngineBackend/CuraEngineBackend.py:489 #: plugins/CuraEngineBackend/CuraEngineBackend.py:501 #: plugins/CuraEngineBackend/CuraEngineBackend.py:514 msgctxt "@info:title" msgid "Unable to slice" msgstr "Viipalointi ei onnistu" #: plugins/CuraEngineBackend/CuraEngineBackend.py:449 #, python-brace-format msgctxt "@info:status" msgid "Unable to slice with the current settings. The following settings have errors: {0}" msgstr "Viipalointi ei onnistu nykyisten asetuksien ollessa voimassa. Seuraavissa asetuksissa on virheitä: {0}" #: plugins/CuraEngineBackend/CuraEngineBackend.py:476 #, python-brace-format msgctxt "@info:status" msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}" msgstr "" #: plugins/CuraEngineBackend/CuraEngineBackend.py:488 msgctxt "@info:status" msgid "Unable to slice because the prime tower or prime position(s) are invalid." msgstr "Viipalointi ei onnistu, koska esitäyttötorni tai esitäytön sijainti tai sijainnit eivät kelpaa." #: plugins/CuraEngineBackend/CuraEngineBackend.py:500 #, python-format msgctxt "@info:status" msgid "Unable to slice because there are objects associated with disabled Extruder %s." msgstr "" #: plugins/CuraEngineBackend/CuraEngineBackend.py:510 msgctxt "@info:status" msgid "" "Please review settings and check if your models:\n" "- Fit within the build volume\n" "- Are assigned to an enabled extruder\n" "- Are not all set as modifier meshes" msgstr "" #: plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 #: plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 msgctxt "@info:status" msgid "Processing Layers" msgstr "Käsitellään kerroksia" #: plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261 msgctxt "@info:title" msgid "Information" msgstr "Tiedot" #: plugins/CuraEngineBackend/plugin.json msgctxt "name" msgid "CuraEngine Backend" msgstr "CuraEngine-taustaosa" #: plugins/CuraEngineBackend/plugin.json msgctxt "description" msgid "Provides the link to the CuraEngine slicing backend." msgstr "Linkki CuraEngine-viipalointiin taustalla." #: plugins/CuraProfileReader/__init__.py:14 #: plugins/CuraProfileWriter/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura Profile" msgstr "Cura-profiili" #: plugins/CuraProfileReader/plugin.json msgctxt "name" msgid "Cura Profile Reader" msgstr "Cura-profiilin lukija" #: plugins/CuraProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing Cura profiles." msgstr "Tukee Cura-profiilien tuontia." #: plugins/CuraProfileWriter/plugin.json msgctxt "name" msgid "Cura Profile Writer" msgstr "Cura-profiilin kirjoitin" #: plugins/CuraProfileWriter/plugin.json msgctxt "description" msgid "Provides support for exporting Cura profiles." msgstr "Tukee Cura-profiilien vientiä." #: plugins/DigitalLibrary/plugin.json msgctxt "description" msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library." msgstr "" #: plugins/DigitalLibrary/plugin.json msgctxt "name" msgid "Ultimaker Digital Library" msgstr "" #: plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:216 msgctxt "@option" msgid "Save Cura project and print file" msgstr "" #: plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:217 msgctxt "@option" msgid "Save Cura project" msgstr "" #: plugins/DigitalLibrary/src/DigitalFactoryProjectResponse.py:19 msgctxt "@text Placeholder for the username if it has been deleted" msgid "deleted user" msgstr "" #: plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127 msgctxt "@info" msgid "Could not access update information." msgstr "Päivitystietoja ei löytynyt." #: plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17 #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}." msgstr "" #: plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s stable firmware available" msgstr "" #: plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28 msgctxt "@action:button" msgid "How to update" msgstr "" #: plugins/FirmwareUpdateChecker/plugin.json msgctxt "description" msgid "Checks for firmware updates." msgstr "Tarkistaa laiteohjelmistopäivitykset." #: plugins/FirmwareUpdateChecker/plugin.json msgctxt "name" msgid "Firmware Update Checker" msgstr "Laiteohjelmiston päivitysten tarkistus" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27 msgctxt "@action" msgid "Update Firmware" msgstr "" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31 msgctxt "@title" msgid "Update Firmware" msgstr "" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37 msgctxt "@label" msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work." msgstr "Laiteohjelmisto on suoraan 3D-tulostimessa toimiva ohjelma. Laiteohjelmisto ohjaa askelmoottoreita, säätää lämpötilaa ja saa tulostimen toimimaan." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43 msgctxt "@label" msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements." msgstr "Uusien tulostimien mukana toimitettava laiteohjelmisto toimii, mutta uusissa versioissa on yleensä enemmän toimintoja ja parannuksia." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55 msgctxt "@action:button" msgid "Automatically upgrade Firmware" msgstr "Päivitä laiteohjelmisto automaattisesti" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66 msgctxt "@action:button" msgid "Upload custom Firmware" msgstr "Lataa mukautettu laiteohjelmisto" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79 msgctxt "@label" msgid "Firmware can not be updated because there is no connection with the printer." msgstr "" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86 msgctxt "@label" msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware." msgstr "" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93 msgctxt "@title:window" msgid "Select custom firmware" msgstr "Valitse mukautettu laiteohjelmisto" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:113 msgctxt "@title:window" msgid "Firmware Update" msgstr "Laiteohjelmiston päivitys" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:137 msgctxt "@label" msgid "Updating firmware." msgstr "Päivitetään laiteohjelmistoa." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:139 msgctxt "@label" msgid "Firmware update completed." msgstr "Laiteohjelmiston päivitys suoritettu." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:141 msgctxt "@label" msgid "Firmware update failed due to an unknown error." msgstr "Laiteohjelmiston päivitys epäonnistui tuntemattoman virheen takia." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143 msgctxt "@label" msgid "Firmware update failed due to an communication error." msgstr "Laiteohjelmiston päivitys epäonnistui tietoliikennevirheen takia." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145 msgctxt "@label" msgid "Firmware update failed due to an input/output error." msgstr "Laiteohjelmiston päivitys epäonnistui tiedoston lukemiseen tai kirjoittamiseen liittyvän virheen takia." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147 msgctxt "@label" msgid "Firmware update failed due to missing firmware." msgstr "Laiteohjelmiston päivitys epäonnistui puuttuvan laiteohjelmiston takia." #: plugins/FirmwareUpdater/plugin.json msgctxt "name" msgid "Firmware Updater" msgstr "" #: plugins/FirmwareUpdater/plugin.json msgctxt "description" msgid "Provides a machine actions for updating firmware." msgstr "" #: plugins/GCodeGzReader/__init__.py:17 plugins/GCodeGzWriter/__init__.py:17 msgctxt "@item:inlistbox" msgid "Compressed G-code File" msgstr "" #: plugins/GCodeGzReader/plugin.json msgctxt "name" msgid "Compressed G-code Reader" msgstr "" #: plugins/GCodeGzReader/plugin.json msgctxt "description" msgid "Reads g-code from a compressed archive." msgstr "" #: plugins/GCodeGzWriter/GCodeGzWriter.py:43 msgctxt "@error:not supported" msgid "GCodeGzWriter does not support text mode." msgstr "" #: plugins/GCodeGzWriter/plugin.json msgctxt "name" msgid "Compressed G-code Writer" msgstr "" #: plugins/GCodeGzWriter/plugin.json msgctxt "description" msgid "Writes g-code to a compressed archive." msgstr "" #: plugins/GCodeProfileReader/__init__.py:14 plugins/GCodeReader/__init__.py:14 #: plugins/GCodeWriter/__init__.py:16 msgctxt "@item:inlistbox" msgid "G-code File" msgstr "GCode-tiedosto" #: plugins/GCodeProfileReader/plugin.json msgctxt "name" msgid "G-code Profile Reader" msgstr "" #: plugins/GCodeProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing profiles from g-code files." msgstr "Tukee profiilien tuontia GCode-tiedostoista." #: plugins/GCodeReader/FlavorParser.py:359 msgctxt "@info:status" msgid "Parsing G-code" msgstr "G-coden jäsennys" #: plugins/GCodeReader/FlavorParser.py:361 #: plugins/GCodeReader/FlavorParser.py:515 msgctxt "@info:title" msgid "G-code Details" msgstr "G-coden tiedot" #: plugins/GCodeReader/FlavorParser.py:513 msgctxt "@info:generic" msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate." msgstr "Varmista, että G-code on tulostimelle ja sen tulostusasetuksille soveltuva, ennen kuin lähetät tiedoston siihen. G-coden esitys ei välttämättä ole tarkka." #: plugins/GCodeReader/__init__.py:18 msgctxt "@item:inlistbox" msgid "G File" msgstr "G File -tiedosto" #: plugins/GCodeReader/plugin.json msgctxt "description" msgid "Allows loading and displaying G-code files." msgstr "Mahdollistaa GCode-tiedostojen lataamisen ja näyttämisen." #: plugins/GCodeReader/plugin.json msgctxt "name" msgid "G-code Reader" msgstr "GCode-lukija" #: plugins/GCodeWriter/GCodeWriter.py:75 msgctxt "@error:not supported" msgid "GCodeWriter does not support non-text mode." msgstr "" #: plugins/GCodeWriter/GCodeWriter.py:81 plugins/GCodeWriter/GCodeWriter.py:97 msgctxt "@warning:status" msgid "Please prepare G-code before exporting." msgstr "" #: plugins/GCodeWriter/plugin.json msgctxt "name" msgid "G-code Writer" msgstr "" #: plugins/GCodeWriter/plugin.json msgctxt "description" msgid "Writes g-code to a file." msgstr "" #: plugins/ImageReader/ConfigUI.qml:14 msgctxt "@title:window" msgid "Convert Image" msgstr "" #: plugins/ImageReader/ConfigUI.qml:33 msgctxt "@action:label" msgid "Height (mm)" msgstr "Korkeus (mm)" #: plugins/ImageReader/ConfigUI.qml:56 msgctxt "@info:tooltip" msgid "The maximum distance of each pixel from \"Base.\"" msgstr "Kunkin pikselin suurin etäisyys \"Pohja\"-arvosta." #: plugins/ImageReader/ConfigUI.qml:66 msgctxt "@action:label" msgid "Base (mm)" msgstr "Pohja (mm)" #: plugins/ImageReader/ConfigUI.qml:90 msgctxt "@info:tooltip" msgid "The base height from the build plate in millimeters." msgstr "Pohjan korkeus alustasta millimetreinä." #: plugins/ImageReader/ConfigUI.qml:100 msgctxt "@action:label" msgid "Width (mm)" msgstr "Leveys (mm)" #: plugins/ImageReader/ConfigUI.qml:124 msgctxt "@info:tooltip" msgid "The width in millimeters on the build plate" msgstr "" #: plugins/ImageReader/ConfigUI.qml:134 msgctxt "@action:label" msgid "Depth (mm)" msgstr "Syvyys (mm)" #: plugins/ImageReader/ConfigUI.qml:158 msgctxt "@info:tooltip" msgid "The depth in millimeters on the build plate" msgstr "Syvyys millimetreinä alustalla" #: plugins/ImageReader/ConfigUI.qml:187 msgctxt "@item:inlistbox" msgid "Darker is higher" msgstr "Tummempi on korkeampi" #: plugins/ImageReader/ConfigUI.qml:188 msgctxt "@item:inlistbox" msgid "Lighter is higher" msgstr "Vaaleampi on korkeampi" #: plugins/ImageReader/ConfigUI.qml:195 msgctxt "@info:tooltip" msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model." msgstr "" #: plugins/ImageReader/ConfigUI.qml:205 msgctxt "@action:label" msgid "Color Model" msgstr "" #: plugins/ImageReader/ConfigUI.qml:224 msgctxt "@item:inlistbox" msgid "Linear" msgstr "" #: plugins/ImageReader/ConfigUI.qml:225 msgctxt "@item:inlistbox" msgid "Translucency" msgstr "" #: plugins/ImageReader/ConfigUI.qml:232 msgctxt "@info:tooltip" msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly." msgstr "" #: plugins/ImageReader/ConfigUI.qml:242 msgctxt "@action:label" msgid "1mm Transmittance (%)" msgstr "" #: plugins/ImageReader/ConfigUI.qml:263 msgctxt "@info:tooltip" msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image." msgstr "" #: plugins/ImageReader/ConfigUI.qml:274 msgctxt "@action:label" msgid "Smoothing" msgstr "Tasoitus" #: plugins/ImageReader/ConfigUI.qml:298 msgctxt "@info:tooltip" msgid "The amount of smoothing to apply to the image." msgstr "Kuvassa käytettävän tasoituksen määrä." #: plugins/ImageReader/ConfigUI.qml:329 #: plugins/SliceInfoPlugin/MoreInfoWindow.qml:136 #: resources/qml/ColorDialog.qml:148 resources/qml/Dialogs/RenameDialog.qml:25 msgctxt "@action:button" msgid "OK" msgstr "OK" #: plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "JPG Image" msgstr "JPG-kuva" #: plugins/ImageReader/__init__.py:18 msgctxt "@item:inlistbox" msgid "JPEG Image" msgstr "JPEG-kuva" #: plugins/ImageReader/__init__.py:22 msgctxt "@item:inlistbox" msgid "PNG Image" msgstr "PNG-kuva" #: plugins/ImageReader/__init__.py:26 msgctxt "@item:inlistbox" msgid "BMP Image" msgstr "BMP-kuva" #: plugins/ImageReader/__init__.py:30 msgctxt "@item:inlistbox" msgid "GIF Image" msgstr "GIF-kuva" #: plugins/ImageReader/plugin.json msgctxt "description" msgid "Enables ability to generate printable geometry from 2D image files." msgstr "Mahdollistaa tulostettavien geometrioiden luomisen 2D-kuvatiedostoista." #: plugins/ImageReader/plugin.json msgctxt "name" msgid "Image Reader" msgstr "Kuvanlukija" #: plugins/LegacyProfileReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura 15.04 profiles" msgstr "Cura 15.04 -profiilit" #: plugins/LegacyProfileReader/plugin.json msgctxt "name" msgid "Legacy Cura Profile Reader" msgstr "Aikaisempien Cura-profiilien lukija" #: plugins/LegacyProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing profiles from legacy Cura versions." msgstr "Tukee profiilien tuontia aikaisemmista Cura-versioista." #: plugins/MachineSettingsAction/MachineSettingsAction.py:32 msgctxt "@action" msgid "Machine Settings" msgstr "Laitteen asetukset" #: plugins/MachineSettingsAction/MachineSettingsAction.qml:42 msgctxt "@title:tab" msgid "Printer" msgstr "Tulostin" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63 msgctxt "@title:label" msgid "Nozzle Settings" msgstr "" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:74 msgctxt "@label" msgid "Nozzle size" msgstr "Suuttimen koko" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:78 #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:92 #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:108 #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:123 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:72 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:87 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:102 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279 #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:85 #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:99 msgctxt "@label" msgid "mm" msgstr "mm" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:88 msgctxt "@label" msgid "Compatible material diameter" msgstr "" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:104 msgctxt "@label" msgid "Nozzle offset X" msgstr "Suuttimen X-siirtymä" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:119 msgctxt "@label" msgid "Nozzle offset Y" msgstr "Suuttimen Y-siirtymä" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:134 msgctxt "@label" msgid "Cooling Fan Number" msgstr "" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162 msgctxt "@title:label" msgid "Extruder Start G-code" msgstr "" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176 msgctxt "@title:label" msgid "Extruder End G-code" msgstr "" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56 msgctxt "@title:label" msgid "Printer Settings" msgstr "" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:68 msgctxt "@label" msgid "X (Width)" msgstr "X (leveys)" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:83 msgctxt "@label" msgid "Y (Depth)" msgstr "Y (syvyys)" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:98 msgctxt "@label" msgid "Z (Height)" msgstr "Z (korkeus)" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:112 msgctxt "@label" msgid "Build plate shape" msgstr "Alustan muoto" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:125 msgctxt "@label" msgid "Origin at center" msgstr "" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:137 msgctxt "@label" msgid "Heated bed" msgstr "" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:149 msgctxt "@label" msgid "Heated build volume" msgstr "" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:161 msgctxt "@label" msgid "G-code flavor" msgstr "" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:185 msgctxt "@title:label" msgid "Printhead Settings" msgstr "" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:197 msgctxt "@label" msgid "X min" msgstr "X väh" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:217 msgctxt "@label" msgid "Y min" msgstr "Y väh" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:237 msgctxt "@label" msgid "X max" msgstr "X enint" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:257 msgctxt "@label" msgid "Y max" msgstr "Y enint" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:275 msgctxt "@label" msgid "Gantry Height" msgstr "" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:289 msgctxt "@label" msgid "Number of Extruders" msgstr "Suulakkeiden määrä" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:342 msgctxt "@label" msgid "Apply Extruder offsets to GCode" msgstr "" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:390 msgctxt "@title:label" msgid "Start G-code" msgstr "" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:401 msgctxt "@title:label" msgid "End G-code" msgstr "" #: plugins/MachineSettingsAction/plugin.json msgctxt "name" msgid "Machine Settings Action" msgstr "" #: plugins/MachineSettingsAction/plugin.json msgctxt "description" msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)." msgstr "" #: plugins/Marketplace/CloudSync/CloudPackageChecker.py:144 msgctxt "@info:generic" msgid "Do you want to sync material and software packages with your account?" msgstr "" #: plugins/Marketplace/CloudSync/CloudPackageChecker.py:145 #: plugins/Marketplace/CloudSync/DownloadPresenter.py:95 msgctxt "@info:title" msgid "Changes detected from your UltiMaker account" msgstr "" #: plugins/Marketplace/CloudSync/CloudPackageChecker.py:147 msgctxt "@action:button" msgid "Sync" msgstr "" #: plugins/Marketplace/CloudSync/DownloadPresenter.py:91 msgctxt "@info:generic" msgid "Syncing..." msgstr "" #: plugins/Marketplace/CloudSync/LicenseModel.py:12 #: plugins/Marketplace/resources/qml/LicenseDialog.qml:79 msgctxt "@button" msgid "Decline" msgstr "" #: plugins/Marketplace/CloudSync/LicenseModel.py:13 #: resources/qml/WelcomePages/UserAgreementContent.qml:53 msgctxt "@button" msgid "Agree" msgstr "" #: plugins/Marketplace/CloudSync/LicenseModel.py:77 msgctxt "@title:window" msgid "Plugin License Agreement" msgstr "Lisäosan lisenssisopimus" #: plugins/Marketplace/CloudSync/LicensePresenter.py:42 msgctxt "@button" msgid "Decline and remove from account" msgstr "" #: plugins/Marketplace/CloudSync/RestartApplicationPresenter.py:22 msgctxt "@info:generic" msgid "You need to quit and restart {} before changes have effect." msgstr "" #: plugins/Marketplace/CloudSync/SyncOrchestrator.py:79 msgctxt "@info:generic" msgid "{} plugins failed to download" msgstr "" #: plugins/Marketplace/LocalPackageList.py:28 msgctxt "@label" msgid "Installed Plugins" msgstr "" #: plugins/Marketplace/LocalPackageList.py:29 msgctxt "@label" msgid "Installed Materials" msgstr "" #: plugins/Marketplace/LocalPackageList.py:33 msgctxt "@label" msgid "Bundled Plugins" msgstr "" #: plugins/Marketplace/LocalPackageList.py:34 msgctxt "@label" msgid "Bundled Materials" msgstr "" #: plugins/Marketplace/PackageModel.py:43 msgctxt "@label:property" msgid "Unknown Package" msgstr "" #: plugins/Marketplace/PackageModel.py:66 msgctxt "@label:property" msgid "Unknown Author" msgstr "" #: plugins/Marketplace/PackageModel.py:95 msgctxt "@label:label Ultimaker Marketplace is a brand name, don't translate" msgid "The material package associated with the Cura project could not be found on the Ultimaker Marketplace. Use the partial material profile definition stored in the Cura project file at your own risk." msgstr "" #: plugins/Marketplace/RemotePackageList.py:117 msgctxt "@info:error" msgid "Could not interpret the server's response." msgstr "" #: plugins/Marketplace/RemotePackageList.py:148 msgctxt "@info:error" msgid "Could not reach Marketplace." msgstr "" #: plugins/Marketplace/plugin.json msgctxt "description" msgid "Manages extensions to the application and allows browsing extensions from the UltiMaker website." msgstr "" #: plugins/Marketplace/plugin.json msgctxt "name" msgid "Marketplace" msgstr "" #: plugins/Marketplace/resources/qml/CompatibilityDialog.qml:15 msgctxt "@title" msgid "Changes from your account" msgstr "" #: plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24 msgctxt "@button" msgid "Dismiss" msgstr "" #: plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24 #: resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:76 #: resources/qml/WelcomePages/WhatsNewContent.qml:175 msgctxt "@button" msgid "Next" msgstr "" #: plugins/Marketplace/resources/qml/CompatibilityDialog.qml:52 msgctxt "@label" msgid "The following packages will be added:" msgstr "" #: plugins/Marketplace/resources/qml/CompatibilityDialog.qml:94 msgctxt "@label" msgid "The following packages can not be installed because of an incompatible Cura version:" msgstr "" #: plugins/Marketplace/resources/qml/InstallMissingPackagesDialog.qml:15 msgctxt "@title" msgid "Install missing Materials" msgstr "" #: plugins/Marketplace/resources/qml/LicenseDialog.qml:15 msgctxt "@button" msgid "Plugin license agreement" msgstr "" #: plugins/Marketplace/resources/qml/LicenseDialog.qml:47 msgctxt "@text" msgid "Please read and agree with the plugin licence." msgstr "" #: plugins/Marketplace/resources/qml/LicenseDialog.qml:70 msgctxt "@button" msgid "Accept" msgstr "" #: plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32 msgctxt "@info:tooltip" msgid "Manage packages" msgstr "" #: plugins/Marketplace/resources/qml/ManagedPackages.qml:12 msgctxt "@header" msgid "Manage packages" msgstr "" #: plugins/Marketplace/resources/qml/ManagedPackages.qml:16 msgctxt "@text" msgid "Manage your UltiMaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly." msgstr "" #: plugins/Marketplace/resources/qml/Marketplace.qml:87 msgctxt "@title" msgid "Loading..." msgstr "" #: plugins/Marketplace/resources/qml/Marketplace.qml:148 msgctxt "@button" msgid "Plugins" msgstr "" #: plugins/Marketplace/resources/qml/Marketplace.qml:156 msgctxt "@button" msgid "Materials" msgstr "" #: plugins/Marketplace/resources/qml/Marketplace.qml:193 msgctxt "@info" msgid "Search in the browser" msgstr "" #: plugins/Marketplace/resources/qml/Marketplace.qml:271 msgctxt "@button" msgid "In order to use the package you will need to restart Cura" msgstr "" #: plugins/Marketplace/resources/qml/Marketplace.qml:279 msgctxt "@info:button, %1 is the application name" msgid "Quit %1" msgstr "" #: plugins/Marketplace/resources/qml/Marketplace.qml:300 msgctxt "@description" msgid "Please sign in to get verified plugins and materials for UltiMaker Cura Enterprise" msgstr "" #: plugins/Marketplace/resources/qml/Materials.qml:8 #: plugins/Marketplace/resources/qml/MissingPackages.qml:8 msgctxt "@header" msgid "Install Materials" msgstr "" #: plugins/Marketplace/resources/qml/Materials.qml:12 msgctxt "@text" msgid "Select and install material profiles optimised for your UltiMaker 3D printers." msgstr "" #: plugins/Marketplace/resources/qml/MultipleLicenseDialog.qml:35 msgctxt "@label" msgid "You need to accept the license to install the package" msgstr "" #: plugins/Marketplace/resources/qml/OnboardBanner.qml:101 #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:205 msgctxt "@button:label" msgid "Learn More" msgstr "" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:170 msgctxt "@label Is followed by the name of an author" msgid "By" msgstr "" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:224 msgctxt "@button" msgid "Disable" msgstr "" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:224 msgctxt "@button" msgid "Enable" msgstr "" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:242 msgctxt "@button" msgid "Downgrading..." msgstr "" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:243 msgctxt "@button" msgid "Downgrade" msgstr "" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:247 msgctxt "@button" msgid "Installing..." msgstr "" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:248 msgctxt "@button" msgid "Install" msgstr "" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:252 msgctxt "@button" msgid "Uninstall" msgstr "" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:267 msgctxt "@button" msgid "Update" msgstr "" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:267 msgctxt "@button" msgid "Updating..." msgstr "" #: plugins/Marketplace/resources/qml/PackageDetails.qml:15 msgctxt "@header" msgid "Package details" msgstr "" #: plugins/Marketplace/resources/qml/PackageDetails.qml:40 msgctxt "@button:tooltip" msgid "Back" msgstr "" #: plugins/Marketplace/resources/qml/PackagePage.qml:81 msgctxt "@header" msgid "Description" msgstr "" #: plugins/Marketplace/resources/qml/PackagePage.qml:110 msgctxt "@header" msgid "Compatible printers" msgstr "" #: plugins/Marketplace/resources/qml/PackagePage.qml:134 msgctxt "@info" msgid "No compatibility information" msgstr "" #: plugins/Marketplace/resources/qml/PackagePage.qml:152 msgctxt "@header" msgid "Compatible support materials" msgstr "" #: plugins/Marketplace/resources/qml/PackagePage.qml:176 msgctxt "@info No materials" msgid "None" msgstr "" #: plugins/Marketplace/resources/qml/PackagePage.qml:193 msgctxt "@header" msgid "Compatible with Material Station" msgstr "" #: plugins/Marketplace/resources/qml/PackagePage.qml:202 #: plugins/Marketplace/resources/qml/PackagePage.qml:228 msgctxt "@info" msgid "No" msgstr "" #: plugins/Marketplace/resources/qml/PackagePage.qml:202 #: plugins/Marketplace/resources/qml/PackagePage.qml:228 msgctxt "@info" msgid "Yes" msgstr "" #: plugins/Marketplace/resources/qml/PackagePage.qml:219 msgctxt "@header" msgid "Optimized for Air Manager" msgstr "" #: plugins/Marketplace/resources/qml/PackagePage.qml:243 msgctxt "@button" msgid "Visit plug-in website" msgstr "" #: plugins/Marketplace/resources/qml/PackagePage.qml:243 msgctxt "@button" msgid "Website" msgstr "" #: plugins/Marketplace/resources/qml/PackagePage.qml:252 msgctxt "@button" msgid "Buy spool" msgstr "" #: plugins/Marketplace/resources/qml/PackagePage.qml:261 msgctxt "@button" msgid "Safety datasheet" msgstr "" #: plugins/Marketplace/resources/qml/PackagePage.qml:270 msgctxt "@button" msgid "Technical datasheet" msgstr "" #: plugins/Marketplace/resources/qml/Packages.qml:151 msgctxt "@button" msgid "Failed to load packages:" msgstr "" #: plugins/Marketplace/resources/qml/Packages.qml:151 msgctxt "@button" msgid "Retry?" msgstr "" #: plugins/Marketplace/resources/qml/Packages.qml:167 msgctxt "@button" msgid "Loading" msgstr "" #: plugins/Marketplace/resources/qml/Packages.qml:183 msgctxt "@message" msgid "No more results to load" msgstr "" #: plugins/Marketplace/resources/qml/Packages.qml:183 msgctxt "@message" msgid "No results found with current filter" msgstr "" #: plugins/Marketplace/resources/qml/Packages.qml:226 msgctxt "@button" msgid "Load more" msgstr "" #: plugins/Marketplace/resources/qml/Plugins.qml:8 msgctxt "@header" msgid "Install Plugins" msgstr "" #: plugins/Marketplace/resources/qml/Plugins.qml:12 msgctxt "@text" msgid "Streamline your workflow and customize your UltiMaker Cura experience with plugins contributed by our amazing community of users." msgstr "" #: plugins/Marketplace/resources/qml/VerifiedIcon.qml:21 msgctxt "@info" msgid "UltiMaker Verified Plug-in" msgstr "" #: plugins/Marketplace/resources/qml/VerifiedIcon.qml:22 msgctxt "@info" msgid "UltiMaker Certified Material" msgstr "" #: plugins/Marketplace/resources/qml/VerifiedIcon.qml:23 msgctxt "@info" msgid "UltiMaker Verified Package" msgstr "" #: plugins/ModelChecker/ModelChecker.py:31 msgctxt "@info:title" msgid "3D Model Assistant" msgstr "" #: plugins/ModelChecker/ModelChecker.py:97 #, python-brace-format msgctxt "@info:status" msgid "" "

    One or more 3D models may not print optimally due to the model size and material configuration:

    \n" "

    {model_names}

    \n" "

    Find out how to ensure the best possible print quality and reliability.

    \n" "

    View print quality guide

    " msgstr "" #: plugins/ModelChecker/plugin.json msgctxt "description" msgid "Checks models and print configuration for possible printing issues and give suggestions." msgstr "" #: plugins/ModelChecker/plugin.json msgctxt "name" msgid "Model Checker" msgstr "" #: plugins/MonitorStage/MonitorMain.qml:100 msgctxt "@info" msgid "" "Please make sure your printer has a connection:\n" "- Check if the printer is turned on.\n" "- Check if the printer is connected to the network.\n" "- Check if you are signed in to discover cloud-connected printers." msgstr "" #: plugins/MonitorStage/MonitorMain.qml:113 msgctxt "@info" msgid "Please connect your printer to the network." msgstr "" #: plugins/MonitorStage/MonitorMain.qml:148 msgctxt "@label link to technical assistance" msgid "View user manuals online" msgstr "" #: plugins/MonitorStage/MonitorMain.qml:164 msgctxt "@info" msgid "In order to monitor your print from Cura, please connect the printer." msgstr "" #: plugins/MonitorStage/__init__.py:14 msgctxt "@item:inmenu" msgid "Monitor" msgstr "" #: plugins/MonitorStage/plugin.json msgctxt "name" msgid "Monitor Stage" msgstr "" #: plugins/MonitorStage/plugin.json msgctxt "description" msgid "Provides a monitor stage in Cura." msgstr "" #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41 msgctxt "@label" msgid "Mesh Type" msgstr "" #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81 msgctxt "@label" msgid "Normal model" msgstr "" #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96 msgctxt "@label" msgid "Print as support" msgstr "" #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111 msgctxt "@label" msgid "Modify settings for overlaps" msgstr "" #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126 msgctxt "@label" msgid "Don't support overlaps" msgstr "" #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160 msgctxt "@item:inlistbox" msgid "Infill mesh only" msgstr "" #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:161 msgctxt "@item:inlistbox" msgid "Cutting mesh" msgstr "" #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:386 msgctxt "@action:button" msgid "Select settings" msgstr "Valitse asetukset" #: plugins/PerObjectSettingsTool/SettingPickDialog.qml:17 msgctxt "@title:window" msgid "Select Settings to Customize for this model" msgstr "Valitse tätä mallia varten mukautettavat asetukset" #: plugins/PerObjectSettingsTool/SettingPickDialog.qml:61 #: resources/qml/Preferences/SettingVisibilityPage.qml:102 msgctxt "@label:textbox" msgid "Filter..." msgstr "Suodatin..." #: plugins/PerObjectSettingsTool/SettingPickDialog.qml:75 msgctxt "@label:checkbox" msgid "Show all" msgstr "Näytä kaikki" #: plugins/PerObjectSettingsTool/__init__.py:14 msgctxt "@label" msgid "Per Model Settings" msgstr "Mallikohtaiset asetukset" #: plugins/PerObjectSettingsTool/__init__.py:15 msgctxt "@info:tooltip" msgid "Configure Per Model Settings" msgstr "Määritä mallikohtaiset asetukset" #: plugins/PerObjectSettingsTool/plugin.json msgctxt "name" msgid "Per Model Settings Tool" msgstr "Mallikohtaisten asetusten työkalu" #: plugins/PerObjectSettingsTool/plugin.json msgctxt "description" msgid "Provides the Per Model Settings." msgstr "Mallikohtaisten asetusten muokkaus." #: plugins/PostProcessingPlugin/PostProcessingPlugin.py:35 msgctxt "@item:inmenu" msgid "Post Processing" msgstr "" #: plugins/PostProcessingPlugin/PostProcessingPlugin.py:36 msgctxt "@item:inmenu" msgid "Modify G-Code" msgstr "" #: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17 msgctxt "@title:window" msgid "Post Processing Plugin" msgstr "Jälkikäsittelylisäosa" #: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57 msgctxt "@label" msgid "Post Processing Scripts" msgstr "Jälkikäsittelykomentosarjat" #: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:215 msgctxt "@action" msgid "Add a script" msgstr "Lisää komentosarja" #: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:251 msgctxt "@label" msgid "Settings" msgstr "Asetukset" #: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:460 msgctxt "@info:tooltip" msgid "Change active post-processing scripts." msgstr "" #: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:464 msgctxt "@info:tooltip" msgid "The following script is active:" msgid_plural "The following scripts are active:" msgstr[0] "" msgstr[1] "" #: plugins/PostProcessingPlugin/plugin.json msgctxt "description" msgid "Extension that allows for user created scripts for post processing" msgstr "Lisäosa, jonka avulla käyttäjät voivat luoda komentosarjoja jälkikäsittelyä varten" #: plugins/PostProcessingPlugin/plugin.json msgctxt "name" msgid "Post Processing" msgstr "Jälkikäsittely" #: plugins/PrepareStage/PrepareMenu.qml:74 msgctxt "@button" msgid "Add printer" msgstr "" #: plugins/PrepareStage/PrepareMenu.qml:90 msgctxt "@button" msgid "Manage printers" msgstr "" #: plugins/PrepareStage/__init__.py:12 msgctxt "@item:inmenu" msgid "Prepare" msgstr "" #: plugins/PrepareStage/plugin.json msgctxt "name" msgid "Prepare Stage" msgstr "" #: plugins/PrepareStage/plugin.json msgctxt "description" msgid "Provides a prepare stage in Cura." msgstr "" #: plugins/PreviewStage/__init__.py:13 msgctxt "@item:inmenu" msgid "Preview" msgstr "" #: plugins/PreviewStage/plugin.json msgctxt "name" msgid "Preview Stage" msgstr "" #: plugins/PreviewStage/plugin.json msgctxt "description" msgid "Provides a preview stage in Cura." msgstr "" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." msgid "Save to Removable Drive" msgstr "Tallenna siirrettävälle asemalle" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24 #, python-brace-format msgctxt "@item:inlistbox" msgid "Save to Removable Drive {0}" msgstr "Tallenna siirrettävälle asemalle {0}" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 #: plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118 msgctxt "@info:status" msgid "There are no file formats available to write with!" msgstr "" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109 #, python-brace-format msgctxt "@info:progress Don't translate the XML tags !" msgid "Saving to Removable Drive {0}" msgstr "Tallennetaan siirrettävälle asemalle {0}" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:110 msgctxt "@info:title" msgid "Saving" msgstr "Tallennetaan" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:120 #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" msgstr "Ei voitu tallentaa tiedostoon {0}: {1}" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." msgstr "Ei löydetty tiedostonimeä yritettäessä kirjoittaa laitteeseen {device}." #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:152 #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:171 #, python-brace-format msgctxt "@info:status" msgid "Could not save to removable drive {0}: {1}" msgstr "Ei voitu tallentaa siirrettävälle asemalle {0}: {1}" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:162 #, python-brace-format msgctxt "@info:status" msgid "Saved to Removable Drive {0} as {1}" msgstr "Tallennettu siirrettävälle asemalle {0} nimellä {1}" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163 msgctxt "@info:title" msgid "File Saved" msgstr "Tiedosto tallennettu" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 msgctxt "@action:button" msgid "Eject" msgstr "Poista" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 #, python-brace-format msgctxt "@action" msgid "Eject removable device {0}" msgstr "Poista siirrettävä asema {0}" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:184 #, python-brace-format msgctxt "@info:status" msgid "Ejected {0}. You can now safely remove the drive." msgstr "Poistettu {0}. Voit nyt poistaa aseman turvallisesti." #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:185 msgctxt "@info:title" msgid "Safely Remove Hardware" msgstr "Poista laite turvallisesti" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:188 #, python-brace-format msgctxt "@info:status" msgid "Failed to eject {0}. Another program may be using the drive." msgstr "Kohteen {0} poistaminen epäonnistui. Asema saattaa olla toisen ohjelman käytössä." #: plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76 msgctxt "@item:intext" msgid "Removable Drive" msgstr "Siirrettävä asema" #: plugins/RemovableDriveOutputDevice/plugin.json msgctxt "description" msgid "Provides removable drive hotplugging and writing support." msgstr "Tukee irrotettavan aseman kytkemistä lennossa ja sille kirjoittamista." #: plugins/RemovableDriveOutputDevice/plugin.json msgctxt "name" msgid "Removable Drive Output Device Plugin" msgstr "Irrotettavan aseman tulostusvälineen laajennus" #: plugins/SentryLogger/plugin.json msgctxt "description" msgid "Logs certain events so that they can be used by the crash reporter" msgstr "" #: plugins/SentryLogger/plugin.json msgctxt "name" msgid "Sentry Logger" msgstr "" #: plugins/SimulationView/SimulationView.py:129 msgctxt "@info:status" msgid "Nothing is shown because you need to slice first." msgstr "" #: plugins/SimulationView/SimulationView.py:130 msgctxt "@info:title" msgid "No layers to show" msgstr "" #: plugins/SimulationView/SimulationView.py:132 #: plugins/SolidView/SolidView.py:74 msgctxt "@info:option_text" msgid "Do not show this message again" msgstr "" #: plugins/SimulationView/SimulationViewMenuComponent.qml:18 #: plugins/SimulationView/SimulationViewMenuComponent.qml:47 msgctxt "@label" msgid "Color scheme" msgstr "Värimalli" #: plugins/SimulationView/SimulationViewMenuComponent.qml:104 msgctxt "@label:listbox" msgid "Material Color" msgstr "Materiaalin väri" #: plugins/SimulationView/SimulationViewMenuComponent.qml:108 msgctxt "@label:listbox" msgid "Line Type" msgstr "Linjojen tyyppi" #: plugins/SimulationView/SimulationViewMenuComponent.qml:112 msgctxt "@label:listbox" msgid "Speed" msgstr "" #: plugins/SimulationView/SimulationViewMenuComponent.qml:116 msgctxt "@label:listbox" msgid "Layer Thickness" msgstr "" #: plugins/SimulationView/SimulationViewMenuComponent.qml:120 msgctxt "@label:listbox" msgid "Line Width" msgstr "" #: plugins/SimulationView/SimulationViewMenuComponent.qml:124 msgctxt "@label:listbox" msgid "Flow" msgstr "" #: plugins/SimulationView/SimulationViewMenuComponent.qml:164 msgctxt "@label" msgid "Compatibility Mode" msgstr "Yhteensopivuustila" #: plugins/SimulationView/SimulationViewMenuComponent.qml:231 msgctxt "@label" msgid "Travels" msgstr "" #: plugins/SimulationView/SimulationViewMenuComponent.qml:237 msgctxt "@label" msgid "Helpers" msgstr "" #: plugins/SimulationView/SimulationViewMenuComponent.qml:243 msgctxt "@label" msgid "Shell" msgstr "" #: plugins/SimulationView/SimulationViewMenuComponent.qml:249 msgctxt "@label" msgid "Infill" msgstr "Täyttö" #: plugins/SimulationView/SimulationViewMenuComponent.qml:257 msgctxt "@label" msgid "Starts" msgstr "" #: plugins/SimulationView/SimulationViewMenuComponent.qml:304 msgctxt "@label" msgid "Only Show Top Layers" msgstr "Näytä vain yläkerrokset" #: plugins/SimulationView/SimulationViewMenuComponent.qml:313 msgctxt "@label" msgid "Show 5 Detailed Layers On Top" msgstr "Näytä 5 yksityiskohtaista kerrosta ylhäällä" #: plugins/SimulationView/SimulationViewMenuComponent.qml:326 msgctxt "@label" msgid "Top / Bottom" msgstr "Yläosa/alaosa" #: plugins/SimulationView/SimulationViewMenuComponent.qml:330 msgctxt "@label" msgid "Inner Wall" msgstr "Sisäseinämä" #: plugins/SimulationView/SimulationViewMenuComponent.qml:397 msgctxt "@label" msgid "min" msgstr "" #: plugins/SimulationView/SimulationViewMenuComponent.qml:462 msgctxt "@label" msgid "max" msgstr "" #: plugins/SimulationView/__init__.py:15 msgctxt "@item:inlistbox" msgid "Layer view" msgstr "Kerrosnäkymä" #: plugins/SimulationView/plugin.json msgctxt "description" msgid "Provides the preview of sliced layerdata." msgstr "" #: plugins/SimulationView/plugin.json msgctxt "name" msgid "Simulation View" msgstr "" #: plugins/SliceInfoPlugin/MoreInfoWindow.qml:16 msgctxt "@title:window" msgid "More information on anonymous data collection" msgstr "" #: plugins/SliceInfoPlugin/MoreInfoWindow.qml:73 msgctxt "@text:window" msgid "UltiMaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:" msgstr "" #: plugins/SliceInfoPlugin/MoreInfoWindow.qml:107 msgctxt "@text:window" msgid "I don't want to send anonymous data" msgstr "" #: plugins/SliceInfoPlugin/MoreInfoWindow.qml:116 msgctxt "@text:window" msgid "Allow sending anonymous data" msgstr "" #: plugins/SliceInfoPlugin/SliceInfo.py:95 msgctxt "@text" msgid "Unable to read example data file." msgstr "" #: plugins/SliceInfoPlugin/plugin.json msgctxt "name" msgid "Slice info" msgstr "Viipalointitiedot" #: plugins/SliceInfoPlugin/plugin.json msgctxt "description" msgid "Submits anonymous slice info. Can be disabled through preferences." msgstr "Lähettää anonyymiä viipalointitietoa. Voidaan lisäasetuksista kytkeä pois käytöstä." #: plugins/SolidView/SolidView.py:71 msgctxt "@info:status" msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura." msgstr "" #: plugins/SolidView/SolidView.py:73 msgctxt "@info:title" msgid "Model Errors" msgstr "" #: plugins/SolidView/__init__.py:12 msgctxt "@item:inmenu" msgid "Solid view" msgstr "Kiinteä näkymä" #: plugins/SolidView/plugin.json msgctxt "description" msgid "Provides a normal solid mesh view." msgstr "Näyttää normaalin kiinteän verkkonäkymän." #: plugins/SolidView/plugin.json msgctxt "name" msgid "Solid View" msgstr "Kiinteä näkymä" #: plugins/SupportEraser/__init__.py:12 msgctxt "@label" msgid "Support Blocker" msgstr "" #: plugins/SupportEraser/__init__.py:13 msgctxt "@info:tooltip" msgid "Create a volume in which supports are not printed." msgstr "" #: plugins/SupportEraser/plugin.json msgctxt "description" msgid "Creates an eraser mesh to block the printing of support in certain places" msgstr "" #: plugins/SupportEraser/plugin.json msgctxt "name" msgid "Support Eraser" msgstr "" #: plugins/TrimeshReader/__init__.py:15 msgctxt "@item:inlistbox 'Open' is part of the name of this file format." msgid "Open Compressed Triangle Mesh" msgstr "" #: plugins/TrimeshReader/__init__.py:19 msgctxt "@item:inlistbox" msgid "COLLADA Digital Asset Exchange" msgstr "" #: plugins/TrimeshReader/__init__.py:23 msgctxt "@item:inlistbox" msgid "glTF Binary" msgstr "" #: plugins/TrimeshReader/__init__.py:27 msgctxt "@item:inlistbox" msgid "glTF Embedded JSON" msgstr "" #: plugins/TrimeshReader/__init__.py:36 msgctxt "@item:inlistbox" msgid "Stanford Triangle Format" msgstr "" #: plugins/TrimeshReader/__init__.py:40 msgctxt "@item:inlistbox" msgid "Compressed COLLADA Digital Asset Exchange" msgstr "" #: plugins/TrimeshReader/plugin.json msgctxt "description" msgid "Provides support for reading model files." msgstr "" #: plugins/TrimeshReader/plugin.json msgctxt "name" msgid "Trimesh Reader" msgstr "" #: plugins/UFPReader/__init__.py:22 plugins/UFPWriter/__init__.py:28 msgctxt "@item:inlistbox" msgid "UltiMaker Format Package" msgstr "" #: plugins/UFPReader/plugin.json msgctxt "description" msgid "Provides support for reading Ultimaker Format Packages." msgstr "" #: plugins/UFPReader/plugin.json msgctxt "name" msgid "UFP Reader" msgstr "" #: plugins/UFPWriter/UFPWriter.py:64 plugins/UFPWriter/UFPWriter.py:80 #: plugins/UFPWriter/UFPWriter.py:93 plugins/UFPWriter/UFPWriter.py:115 #: plugins/UFPWriter/UFPWriter.py:170 plugins/UFPWriter/UFPWriter.py:180 msgctxt "@info:error" msgid "Can't write to UFP file:" msgstr "" #: plugins/UFPWriter/plugin.json msgctxt "description" msgid "Provides support for writing Ultimaker Format Packages." msgstr "" #: plugins/UFPWriter/plugin.json msgctxt "name" msgid "UFP Writer" msgstr "" #: plugins/UM3NetworkPrinting/plugin.json msgctxt "description" msgid "Manages network connections to UltiMaker networked printers." msgstr "" #: plugins/UM3NetworkPrinting/plugin.json msgctxt "name" msgid "UltiMaker Network Connection" msgstr "UltiMaker-verkkoyhteys" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44 msgctxt "@title:window" msgid "Connect to Networked Printer" msgstr "Yhdistä verkkotulostimeen" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51 msgctxt "@label" msgid "Select your printer from the list below:" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51 msgctxt "@label" msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71 msgctxt "@action:button" msgid "Edit" msgstr "Muokkaa" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82 #: resources/qml/Preferences/MachinesPage.qml:153 #: resources/qml/Preferences/Materials/MaterialsPage.qml:186 #: resources/qml/Preferences/ProfilesPage.qml:321 msgctxt "@action:button" msgid "Remove" msgstr "Poista" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90 msgctxt "@action:button" msgid "Refresh" msgstr "Päivitä" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161 msgctxt "@label" msgid "If your printer is not listed, read the network printing troubleshooting guide" msgstr "Jos tulostinta ei ole luettelossa, lue verkkotulostuksen vianetsintäopas" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186 #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:247 msgctxt "@label" msgid "Type" msgstr "Tyyppi" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202 #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:256 msgctxt "@label" msgid "Firmware version" msgstr "Laiteohjelmistoversio" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212 #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:266 msgctxt "@label" msgid "Address" msgstr "Osoite" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232 msgctxt "@label" msgid "This printer is not set up to host a group of printers." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236 msgctxt "@label" msgid "This printer is the host for a group of %1 printers." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245 msgctxt "@label" msgid "The printer at this address has not yet responded." msgstr "Tämän osoitteen tulostin ei ole vielä vastannut." #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250 msgctxt "@action:button" msgid "Connect" msgstr "Yhdistä" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261 msgctxt "@title:window" msgid "Invalid IP address" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262 #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:141 msgctxt "@text" msgid "Please enter a valid IP address." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272 msgctxt "@title:window" msgid "Printer Address" msgstr "Tulostimen osoite" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:97 msgctxt "@label" msgid "Enter the IP address of your printer on the network." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20 msgctxt "@title:window" msgid "Configuration Changes" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36 msgctxt "@action:button" msgid "Override" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83 msgctxt "@label" msgid "The assigned printer, %1, requires the following configuration change:" msgid_plural "The assigned printer, %1, requires the following configuration changes:" msgstr[0] "" msgstr[1] "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87 msgctxt "@label" msgid "The printer %1 is assigned, but the job contains an unknown material configuration." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97 msgctxt "@label" msgid "Change material %1 from %2 to %3." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100 msgctxt "@label" msgid "Load %3 as material %1 (This cannot be overridden)." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103 msgctxt "@label" msgid "Change print core %1 from %2 to %3." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:110 msgctxt "@label" msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144 msgctxt "@label" msgid "Move to top" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:155 msgctxt "@label" msgid "Delete" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:186 #: resources/qml/MonitorButton.qml:284 msgctxt "@label" msgid "Resume" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:188 msgctxt "@label" msgid "Pausing..." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:190 msgctxt "@label" msgid "Resuming..." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:192 #: resources/qml/MonitorButton.qml:279 resources/qml/MonitorButton.qml:288 msgctxt "@label" msgid "Pause" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:206 msgctxt "@label" msgid "Abort" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:206 msgctxt "@label" msgid "Aborting..." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:218 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to move %1 to the top of the queue?" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:219 msgctxt "@window:title" msgid "Move print job to top" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:227 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to delete %1?" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:228 msgctxt "@window:title" msgid "Delete print job" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:236 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to abort %1?" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:237 #: resources/qml/MonitorButton.qml:326 msgctxt "@window:title" msgid "Abort print" msgstr "Keskeytä tulostus" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126 msgctxt "@label" msgid "Unavailable printer" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128 msgctxt "@label" msgid "First available" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:242 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:246 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:472 msgctxt "@info" msgid "Please update your printer's firmware to manage the queue remotely." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 msgctxt "@label:status" msgid "Aborted" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74 msgctxt "@label:status" msgid "Finished" msgstr "Valmis" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356 msgctxt "@label:status" msgid "Preparing..." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 msgctxt "@label:status" msgid "Aborting..." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 msgctxt "@label:status" msgid "Failed" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98 msgctxt "@label:status" msgid "Pausing..." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100 msgctxt "@label:status" msgid "Paused" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102 msgctxt "@label:status" msgid "Resuming..." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104 msgctxt "@label:status" msgid "Action required" msgstr "Vaatii toimenpiteitä" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106 msgctxt "@label:status" msgid "Finishes %1 at %2" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148 msgctxt "@label link to Connect and Cloud interfaces" msgid "Manage printer" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:280 msgctxt "@info" msgid "Webcam feeds for cloud printers cannot be viewed from UltiMaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:340 msgctxt "@label:status" msgid "Loading..." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:344 msgctxt "@label:status" msgid "Unavailable" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348 msgctxt "@label:status" msgid "Unreachable" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352 msgctxt "@label:status" msgid "Idle" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:361 msgctxt "@label:status" msgid "Printing" msgstr "Tulostetaan" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:402 msgctxt "@label" msgid "Untitled" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:417 msgctxt "@label" msgid "Anonymous" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:438 msgctxt "@label:status" msgid "Requires configuration changes" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:452 msgctxt "@action:button" msgid "Details" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29 msgctxt "@label" msgid "Queued" msgstr "Jonossa" #: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:64 msgctxt "@label link to connect manager" msgid "Manage in browser" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:91 msgctxt "@label" msgid "There are no print jobs in the queue. Slice and send a job to add one." msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99 msgctxt "@label" msgid "Print jobs" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:108 msgctxt "@label" msgid "Total print time" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:117 msgctxt "@label" msgid "Waiting for" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorStage.qml:117 msgctxt "@info" msgid "Monitor your printers from everywhere using Ultimaker Digital Factory" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/MonitorStage.qml:129 msgctxt "@button" msgid "View printers in Digital Factory" msgstr "" #: plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12 msgctxt "@title:window" msgid "Print over network" msgstr "Tulosta verkon kautta" #: plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53 msgctxt "@action:button" msgid "Print" msgstr "Tulosta" #: plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81 msgctxt "@label" msgid "Printer selection" msgstr "" #: plugins/UM3NetworkPrinting/src/Cloud/AbstractCloudOutputDevice.py:80 #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:162 msgctxt "@action:button" msgid "Print via cloud" msgstr "" #: plugins/UM3NetworkPrinting/src/Cloud/AbstractCloudOutputDevice.py:81 #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:163 msgctxt "@properties:tooltip" msgid "Print via cloud" msgstr "" #: plugins/UM3NetworkPrinting/src/Cloud/AbstractCloudOutputDevice.py:82 #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:164 msgctxt "@info:status" msgid "Connected via cloud" msgstr "" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:276 msgctxt "@action:button" msgid "Monitor print" msgstr "" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:278 msgctxt "@action:tooltip" msgid "Track the print in Ultimaker Digital Factory" msgstr "" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:298 #, python-brace-format msgctxt "@error:send" msgid "Unknown error code when uploading print job: {0}" msgstr "" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422 #: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:23 msgctxt "info:name" msgid "Ultimaker Digital Factory" msgstr "" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:425 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "{printer_name} will be removed until the next account sync." msgstr "" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:426 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "To remove {printer_name} permanently, visit {digital_factory_link}" msgstr "" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:427 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "Are you sure you want to remove {printer_name} temporarily?" msgstr "" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:474 msgctxt "@title:window" msgid "Remove printers?" msgstr "" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:477 #, python-brace-format msgctxt "@label" msgid "" "You are about to remove {0} printer from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgid_plural "" "You are about to remove {0} printers from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgstr[0] "" msgstr[1] "" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:484 msgctxt "@label" msgid "" "You are about to remove all printers from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25 #, python-brace-format msgctxt "@info:status" msgid "" "Your printer {printer_name} could be connected via cloud.\n" " Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26 msgctxt "@info:title" msgid "Are you ready for cloud printing?" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30 msgctxt "@action" msgid "Get started" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31 #: plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:24 msgctxt "@action" msgid "Learn more" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18 msgctxt "@info:status" msgid "You are attempting to connect to a printer that is not running UltiMaker Connect. Please update the printer to the latest firmware." msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21 msgctxt "@info:title" msgid "Update your printer" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24 #, python-brace-format msgctxt "@info:status" msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}." msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26 msgctxt "@info:title" msgid "Sending materials to printer" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:13 msgctxt "info:status" msgid "New printer detected from your Ultimaker account" msgid_plural "New printers detected from your Ultimaker account" msgstr[0] "" msgstr[1] "" #: plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:29 #, python-brace-format msgctxt "info:status Filled in with printer name and printer model." msgid "Adding printer {name} ({model}) from your account" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:48 #, python-brace-format msgctxt "info:{0} gets replaced by a number of printers" msgid "... and {0} other" msgid_plural "... and {0} others" msgstr[0] "" msgstr[1] "" #: plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:57 msgctxt "info:status" msgid "Printers added from Digital Factory:" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27 #, python-brace-format msgctxt "@info:status" msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host." msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30 msgctxt "@info:title" msgid "Not a group host" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36 msgctxt "@action" msgid "Configure group" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:18 msgctxt "@info:status" msgid "You will receive a confirmation via email when the print job is approved" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:19 msgctxt "@info:title" msgid "The print job was successfully submitted" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:22 msgctxt "@action" msgid "Manage print jobs" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15 msgctxt "@info:status" msgid "Please wait until the current job has been sent." msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16 msgctxt "@info:title" msgid "Print error" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15 msgctxt "@info:text" msgid "Could not upload the data to the printer." msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16 msgctxt "@info:title" msgid "Network error" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15 msgctxt "@info:status" msgid "Sending Print Job" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16 msgctxt "@info:status" msgid "Uploading print job to printer." msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16 msgctxt "@info:status" msgid "Print job queue is full. The printer can't accept a new job." msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17 msgctxt "@info:title" msgid "Queue Full" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15 msgctxt "@info:status" msgid "Print job was successfully sent to the printer." msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16 msgctxt "@info:title" msgid "Data Sent" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:17 msgctxt "info:status" msgid "This printer is not linked to the Digital Factory:" msgid_plural "These printers are not linked to the Digital Factory:" msgstr[0] "" msgstr[1] "" #: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:29 #, python-brace-format msgctxt "info:status" msgid "To establish a connection, please visit the {website_link}" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:33 msgctxt "info:status" msgid "A cloud connection is not available for a printer" msgid_plural "A cloud connection is not available for some printers" msgstr[0] "" msgstr[1] "" #: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:41 msgctxt "@action:button" msgid "Keep printer configurations" msgstr "" #: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:46 msgctxt "@action:button" msgid "Remove printers" msgstr "" #: plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:62 msgctxt "@action:button Preceded by 'Ready to'." msgid "Print over network" msgstr "Tulosta verkon kautta" #: plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:63 msgctxt "@properties:tooltip" msgid "Print over network" msgstr "Tulosta verkon kautta" #: plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:64 msgctxt "@info:status" msgid "Connected over the network" msgstr "" #: plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28 msgctxt "@action" msgid "Connect via Network" msgstr "Yhdistä verkon kautta" #: plugins/UM3NetworkPrinting/src/Utils.py:27 msgctxt "@info:status" msgid "tomorrow" msgstr "" #: plugins/UM3NetworkPrinting/src/Utils.py:30 msgctxt "@info:status" msgid "today" msgstr "" #: plugins/USBPrinting/USBPrinterOutputDevice.py:42 msgctxt "@item:inmenu" msgid "USB printing" msgstr "USB-tulostus" #: plugins/USBPrinting/USBPrinterOutputDevice.py:43 msgctxt "@action:button Preceded by 'Ready to'." msgid "Print via USB" msgstr "Tulosta USB:n kautta" #: plugins/USBPrinting/USBPrinterOutputDevice.py:44 msgctxt "@info:tooltip" msgid "Print via USB" msgstr "Tulosta USB:n kautta" #: plugins/USBPrinting/USBPrinterOutputDevice.py:80 msgctxt "@info:status" msgid "Connected via USB" msgstr "Yhdistetty USB:n kautta" #: plugins/USBPrinting/USBPrinterOutputDevice.py:110 msgctxt "@label" msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?" msgstr "" #: plugins/USBPrinting/USBPrinterOutputDevice.py:135 msgctxt "@message" msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed." msgstr "" #: plugins/USBPrinting/USBPrinterOutputDevice.py:136 msgctxt "@message" msgid "Print in Progress" msgstr "" #: plugins/USBPrinting/plugin.json msgctxt "description" msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware." msgstr "Hyväksyy GCode-määrittelyt ja lähettää ne tulostimeen. Lisäosa voi myös päivittää laiteohjelmiston." #: plugins/USBPrinting/plugin.json msgctxt "name" msgid "USB printing" msgstr "USB-tulostus" #: plugins/UltimakerMachineActions/BedLevelMachineAction.py:24 msgctxt "@action" msgid "Level build plate" msgstr "Tasaa alusta" #: plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30 msgctxt "@title" msgid "Build Plate Leveling" msgstr "Alustan tasaaminen" #: plugins/UltimakerMachineActions/BedLevelMachineAction.qml:42 msgctxt "@label" msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted." msgstr "Voit säätää alustaa, jotta tulosteista tulisi hyviä. Kun napsautat \"Siirry seuraavaan positioon\", suutin siirtyy eri positioihin, joita voidaan säätää." #: plugins/UltimakerMachineActions/BedLevelMachineAction.qml:52 msgctxt "@label" msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle." msgstr "Laita paperinpala kussakin positiossa suuttimen alle ja säädä tulostusalustan korkeus. Tulostusalustan korkeus on oikea, kun suuttimen kärki juuri ja juuri osuu paperiin." #: plugins/UltimakerMachineActions/BedLevelMachineAction.qml:67 msgctxt "@action:button" msgid "Start Build Plate Leveling" msgstr "Aloita alustan tasaaminen" #: plugins/UltimakerMachineActions/BedLevelMachineAction.qml:79 msgctxt "@action:button" msgid "Move to Next Position" msgstr "Siirry seuraavaan positioon" #: plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21 msgctxt "@action" msgid "Select upgrades" msgstr "Valitse päivitykset" #: plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30 msgctxt "@label" msgid "Please select any upgrades made to this UltiMaker Original" msgstr "Valitse tähän UltiMaker Original -laitteeseen tehdyt päivitykset" #: plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:39 msgctxt "@label" msgid "Heated Build Plate (official kit or self-built)" msgstr "Lämmitettävä alusta (virallinen sarja tai itse rakennettu)" #: plugins/UltimakerMachineActions/plugin.json msgctxt "description" msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)." msgstr "UltiMaker-laitteiden toimintojen käyttö (esim. pöydän tasaaminen, päivitysten valinta yms.)" #: plugins/UltimakerMachineActions/plugin.json msgctxt "name" msgid "UltiMaker machine actions" msgstr "" #: plugins/VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." msgstr "Päivittää kokoonpanon versiosta Cura 2.1 versioon Cura 2.2." #: plugins/VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "name" msgid "Version Upgrade 2.1 to 2.2" msgstr "Päivitys versiosta 2.1 versioon 2.2" #: plugins/VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.2 to Cura 2.4." msgstr "Päivittää kokoonpanon versiosta Cura 2.2 versioon Cura 2.4." #: plugins/VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "name" msgid "Version Upgrade 2.2 to 2.4" msgstr "Päivitys versiosta 2.2 versioon 2.4" #: plugins/VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." msgstr "Päivittää kokoonpanon versiosta Cura 2.5 versioon Cura 2.6." #: plugins/VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "name" msgid "Version Upgrade 2.5 to 2.6" msgstr "Päivitys versiosta 2.5 versioon 2.6" #: plugins/VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.6 to Cura 2.7." msgstr "Päivittää kokoonpanon versiosta Cura 2.6 versioon Cura 2.7." #: plugins/VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "name" msgid "Version Upgrade 2.6 to 2.7" msgstr "Päivitys versiosta 2.6 versioon 2.7" #: plugins/VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." msgstr "Päivittää kokoonpanon versiosta Cura 2.7 versioon Cura 3.0." #: plugins/VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" msgid "Version Upgrade 2.7 to 3.0" msgstr "Päivitys versiosta 2.7 versioon 3.0" #: plugins/VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.0 to Cura 3.1." msgstr "Päivittää kokoonpanon versiosta Cura 3.0 versioon Cura 3.1." #: plugins/VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "name" msgid "Version Upgrade 3.0 to 3.1" msgstr "Päivitys versiosta 3.0 versioon 3.1" #: plugins/VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.2 to Cura 3.3." msgstr "Päivittää kokoonpanon versiosta Cura 3.2 versioon Cura 3.3." #: plugins/VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "name" msgid "Version Upgrade 3.2 to 3.3" msgstr "Päivitys versiosta 3.2 versioon 3.3" #: plugins/VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.3 to Cura 3.4." msgstr "Päivittää kokoonpanon versiosta Cura 3.3 versioon Cura 3.4." #: plugins/VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "name" msgid "Version Upgrade 3.3 to 3.4" msgstr "Päivitys versiosta 3.3 versioon 3.4" #: plugins/VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.4 to Cura 3.5." msgstr "Päivittää kokoonpanon versiosta Cura 3.4 versioon Cura 3.5." #: plugins/VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "name" msgid "Version Upgrade 3.4 to 3.5" msgstr "Päivitys versiosta 3.4 versioon 3.5" #: plugins/VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.5 to Cura 4.0." msgstr "Päivittää kokoonpanon versiosta Cura 3.5 versioon Cura 4.0." #: plugins/VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "name" msgid "Version Upgrade 3.5 to 4.0" msgstr "Päivitys versiosta 3.5 versioon 4.0" #: plugins/VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.0 to Cura 4.1." msgstr "Päivittää kokoonpanon versiosta Cura 4.0 versioon Cura 4.1." #: plugins/VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "name" msgid "Version Upgrade 4.0 to 4.1" msgstr "Päivitys versiosta 4.0 versioon 4.1" #: plugins/VersionUpgrade/VersionUpgrade411to412/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.11 to Cura 4.12." msgstr "Päivittää kokoonpanon versiosta Cura 4.11 versioon Cura 4.12." #: plugins/VersionUpgrade/VersionUpgrade411to412/plugin.json msgctxt "name" msgid "Version Upgrade 4.11 to 4.12" msgstr "Päivitys versiosta 4.11 versioon 4.12" #: plugins/VersionUpgrade/VersionUpgrade413to50/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.13 to Cura 5.0." msgstr "Päivittää kokoonpanon versiosta Cura 4.13 versioon Cura 5.0." #: plugins/VersionUpgrade/VersionUpgrade413to50/plugin.json msgctxt "name" msgid "Version Upgrade 4.13 to 5.0" msgstr "Päivitys versiosta 4.13 versioon 5.0" #: plugins/VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.1 to Cura 4.2." msgstr "Päivittää kokoonpanon versiosta Cura 4.1 versioon Cura 4.2." #: plugins/VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "name" msgid "Version Upgrade 4.1 to 4.2" msgstr "Päivitys versiosta 4.1 versioon 4.2" #: plugins/VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.2 to Cura 4.3." msgstr "Päivittää kokoonpanon versiosta Cura 4.2 versioon Cura 4.3." #: plugins/VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "name" msgid "Version Upgrade 4.2 to 4.3" msgstr "Päivitys versiosta 4.2 versioon 4.3" #: plugins/VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.3 to Cura 4.4." msgstr "Päivittää kokoonpanon versiosta Cura 4.3 versioon Cura 4.4." #: plugins/VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "name" msgid "Version Upgrade 4.3 to 4.4" msgstr "Päivitys versiosta 4.3 versioon 4.4" #: plugins/VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.4 to Cura 4.5." msgstr "Päivittää kokoonpanon versiosta Cura 4.4 versioon Cura 4.5." #: plugins/VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "name" msgid "Version Upgrade 4.4 to 4.5" msgstr "Päivitys versiosta 4.4 versioon 4.5" #: plugins/VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.5 to Cura 4.6." msgstr "Päivittää kokoonpanon versiosta Cura 4.5 versioon Cura 4.6." #: plugins/VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "name" msgid "Version Upgrade 4.5 to 4.6" msgstr "Päivitys versiosta 4.5 versioon 4.6" #: plugins/VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2." msgstr "Päivittää kokoonpanon versiosta Cura 4.6.0 versioon Cura 4.6.2." #: plugins/VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "name" msgid "Version Upgrade 4.6.0 to 4.6.2" msgstr "Päivitys versiosta 4.6.0 versioon 4.6.2" #: plugins/VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7." msgstr "Päivittää kokoonpanon versiosta Cura 4.6.2 versioon Cura 4.7." #: plugins/VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "name" msgid "Version Upgrade 4.6.2 to 4.7" msgstr "Päivitys versiosta 4.6.2 versioon 4.7" #: plugins/VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.7 to Cura 4.8." msgstr "Päivittää kokoonpanon versiosta Cura 4.7 versioon Cura 4.8." #: plugins/VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "name" msgid "Version Upgrade 4.7 to 4.8" msgstr "Päivitys versiosta 4.7 versioon 4.8" #: plugins/VersionUpgrade/VersionUpgrade48to49/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.8 to Cura 4.9." msgstr "Päivittää kokoonpanon versiosta Cura 4.8 versioon Cura 4.9." #: plugins/VersionUpgrade/VersionUpgrade48to49/plugin.json msgctxt "name" msgid "Version Upgrade 4.8 to 4.9" msgstr "Päivitys versiosta 4.8 versioon 4.9" #: plugins/VersionUpgrade/VersionUpgrade49to410/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.9 to Cura 4.10." msgstr "Päivittää kokoonpanon versiosta Cura 4.9 versioon Cura 4.10." #: plugins/VersionUpgrade/VersionUpgrade49to410/plugin.json msgctxt "name" msgid "Version Upgrade 4.9 to 4.10" msgstr "Päivitys versiosta 4.9 versioon 4.10" #: plugins/VersionUpgrade/VersionUpgrade52to53/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 5.2 to Cura 5.3." msgstr "Päivittää kokoonpanon versiosta Cura 5.2 versioon Cura 5.3." #: plugins/VersionUpgrade/VersionUpgrade52to53/plugin.json msgctxt "name" msgid "Version Upgrade 5.2 to 5.3" msgstr "Päivitys versiosta 5.2 versioon 5.4" #: plugins/VersionUpgrade/VersionUpgrade53to54/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 5.3 to Cura 5.4." msgstr "" #: plugins/VersionUpgrade/VersionUpgrade53to54/plugin.json msgctxt "name" msgid "Version Upgrade 5.3 to 5.4" msgstr "" #: plugins/X3DReader/__init__.py:13 msgctxt "@item:inlistbox" msgid "X3D File" msgstr "X3D-tiedosto" #: plugins/X3DReader/plugin.json msgctxt "description" msgid "Provides support for reading X3D files." msgstr "Tukee X3D-tiedostojen lukemista." #: plugins/X3DReader/plugin.json msgctxt "name" msgid "X3D Reader" msgstr "X3D-lukija" #: plugins/XRayView/__init__.py:12 msgctxt "@item:inlistbox" msgid "X-Ray view" msgstr "Kerrosnäkymä" #: plugins/XRayView/plugin.json msgctxt "description" msgid "Provides the X-Ray view." msgstr "Näyttää kerrosnäkymän." #: plugins/XRayView/plugin.json msgctxt "name" msgid "X-Ray View" msgstr "Kerrosnäkymä" #: plugins/XmlMaterialProfile/plugin.json msgctxt "name" msgid "Material Profiles" msgstr "Materiaaliprofiilit" #: plugins/XmlMaterialProfile/plugin.json msgctxt "description" msgid "Provides capabilities to read and write XML-based material profiles." msgstr "Mahdollistaa XML-pohjaisten materiaaliprofiilien lukemisen ja kirjoittamisen." #: resources/qml/Account/AccountWidget.qml:24 msgctxt "@action:button" msgid "Sign in" msgstr "" #: resources/qml/Account/GeneralOperations.qml:19 #: resources/qml/WelcomePages/CloudContent.qml:64 msgctxt "@label" msgid "Sign in to the UltiMaker platform" msgstr "" #: resources/qml/Account/GeneralOperations.qml:39 msgctxt "@text" msgid "" "- Add material profiles and plug-ins from the Marketplace\n" "- Back-up and sync your material profiles and plug-ins\n" "- Share ideas and get help from 48,000+ users in the UltiMaker community" msgstr "" #: resources/qml/Account/GeneralOperations.qml:58 msgctxt "@button" msgid "Create a free UltiMaker account" msgstr "" #: resources/qml/Account/SyncState.qml:35 msgctxt "@label" msgid "Checking..." msgstr "" #: resources/qml/Account/SyncState.qml:42 msgctxt "@label" msgid "Account synced" msgstr "" #: resources/qml/Account/SyncState.qml:49 msgctxt "@label" msgid "Something went wrong..." msgstr "" #: resources/qml/Account/SyncState.qml:102 msgctxt "@button" msgid "Install pending updates" msgstr "" #: resources/qml/Account/SyncState.qml:123 msgctxt "@button" msgid "Check for account updates" msgstr "" #: resources/qml/Account/UserOperations.qml:78 msgctxt "@label The argument is a timestamp" msgid "Last update: %1" msgstr "" #: resources/qml/Account/UserOperations.qml:107 msgctxt "@button" msgid "UltiMaker Account" msgstr "" #: resources/qml/Account/UserOperations.qml:126 msgctxt "@button" msgid "Sign Out" msgstr "" #: resources/qml/ActionPanel/OutputProcessWidget.qml:59 msgctxt "@label" msgid "No time estimation available" msgstr "" #: resources/qml/ActionPanel/OutputProcessWidget.qml:77 msgctxt "@label" msgid "No cost estimation available" msgstr "" #: resources/qml/ActionPanel/OutputProcessWidget.qml:127 msgctxt "@button" msgid "Preview" msgstr "" #: resources/qml/ActionPanel/PrintJobInformation.qml:31 msgctxt "@label" msgid "Time estimation" msgstr "" #: resources/qml/ActionPanel/PrintJobInformation.qml:107 msgctxt "@label" msgid "Material estimation" msgstr "" #: resources/qml/ActionPanel/PrintJobInformation.qml:156 msgctxt "@label m for meter" msgid "%1m" msgstr "" #: resources/qml/ActionPanel/PrintJobInformation.qml:157 msgctxt "@label g for grams" msgid "%1g" msgstr "" #: resources/qml/ActionPanel/SliceProcessWidget.qml:54 msgctxt "@label:PrintjobStatus" msgid "Slicing..." msgstr "Viipaloidaan..." #: resources/qml/ActionPanel/SliceProcessWidget.qml:78 msgctxt "@label:PrintjobStatus" msgid "Unable to slice" msgstr "" #: resources/qml/ActionPanel/SliceProcessWidget.qml:114 msgctxt "@button" msgid "Processing" msgstr "" #: resources/qml/ActionPanel/SliceProcessWidget.qml:114 msgctxt "@button" msgid "Slice" msgstr "" #: resources/qml/ActionPanel/SliceProcessWidget.qml:115 msgctxt "@label" msgid "Start the slicing process" msgstr "" #: resources/qml/ActionPanel/SliceProcessWidget.qml:132 msgctxt "@button" msgid "Cancel" msgstr "" #: resources/qml/Actions.qml:81 msgctxt "@action:inmenu" msgid "Show Online Troubleshooting" msgstr "" #: resources/qml/Actions.qml:88 msgctxt "@action:inmenu" msgid "Toggle Full Screen" msgstr "Vaihda koko näyttöön" #: resources/qml/Actions.qml:96 msgctxt "@action:inmenu" msgid "Exit Full Screen" msgstr "" #: resources/qml/Actions.qml:103 msgctxt "@action:inmenu menubar:edit" msgid "&Undo" msgstr "&Kumoa" #: resources/qml/Actions.qml:113 msgctxt "@action:inmenu menubar:edit" msgid "&Redo" msgstr "Tee &uudelleen" #: resources/qml/Actions.qml:131 msgctxt "@action:inmenu menubar:file" msgid "&Quit" msgstr "&Lopeta" #: resources/qml/Actions.qml:139 msgctxt "@action:inmenu menubar:view" msgid "3D View" msgstr "" #: resources/qml/Actions.qml:146 msgctxt "@action:inmenu menubar:view" msgid "Front View" msgstr "" #: resources/qml/Actions.qml:153 msgctxt "@action:inmenu menubar:view" msgid "Top View" msgstr "" #: resources/qml/Actions.qml:160 msgctxt "@action:inmenu menubar:view" msgid "Bottom View" msgstr "" #: resources/qml/Actions.qml:167 msgctxt "@action:inmenu menubar:view" msgid "Left Side View" msgstr "" #: resources/qml/Actions.qml:174 msgctxt "@action:inmenu menubar:view" msgid "Right Side View" msgstr "" #: resources/qml/Actions.qml:188 msgctxt "@action:inmenu" msgid "Configure Cura..." msgstr "Määritä Curan asetukset..." #: resources/qml/Actions.qml:197 msgctxt "@action:inmenu menubar:printer" msgid "&Add Printer..." msgstr "L&isää tulostin..." #: resources/qml/Actions.qml:203 msgctxt "@action:inmenu menubar:printer" msgid "Manage Pr&inters..." msgstr "Tulostinten &hallinta..." #: resources/qml/Actions.qml:210 msgctxt "@action:inmenu" msgid "Manage Materials..." msgstr "Hallitse materiaaleja..." #: resources/qml/Actions.qml:218 msgctxt "@action:inmenu Marketplace is a brand name of UltiMaker's, so don't translate." msgid "Add more materials from Marketplace" msgstr "" #: resources/qml/Actions.qml:225 msgctxt "@action:inmenu menubar:profile" msgid "&Update profile with current settings/overrides" msgstr "&Päivitä nykyiset asetukset tai ohitukset profiiliin" #: resources/qml/Actions.qml:233 msgctxt "@action:inmenu menubar:profile" msgid "&Discard current changes" msgstr "&Hylkää tehdyt muutokset" #: resources/qml/Actions.qml:245 msgctxt "@action:inmenu menubar:profile" msgid "&Create profile from current settings/overrides..." msgstr "&Luo profiili nykyisten asetusten tai ohitusten perusteella..." #: resources/qml/Actions.qml:251 msgctxt "@action:inmenu menubar:profile" msgid "Manage Profiles..." msgstr "Profiilien hallinta..." #: resources/qml/Actions.qml:259 msgctxt "@action:inmenu menubar:help" msgid "Show Online &Documentation" msgstr "Näytä sähköinen &dokumentaatio" #: resources/qml/Actions.qml:267 msgctxt "@action:inmenu menubar:help" msgid "Report a &Bug" msgstr "Ilmoita &virheestä" #: resources/qml/Actions.qml:275 msgctxt "@action:inmenu menubar:help" msgid "What's New" msgstr "" #: resources/qml/Actions.qml:289 msgctxt "@action:inmenu menubar:help" msgid "About..." msgstr "Tietoja..." #: resources/qml/Actions.qml:296 msgctxt "@action:inmenu menubar:edit" msgid "Delete Selected" msgstr "" #: resources/qml/Actions.qml:306 msgctxt "@action:inmenu menubar:edit" msgid "Center Selected" msgstr "" #: resources/qml/Actions.qml:315 msgctxt "@action:inmenu menubar:edit" msgid "Multiply Selected" msgstr "" #: resources/qml/Actions.qml:324 msgctxt "@action:inmenu" msgid "Delete Model" msgstr "Poista malli" #: resources/qml/Actions.qml:332 msgctxt "@action:inmenu" msgid "Ce&nter Model on Platform" msgstr "Ke&skitä malli alustalle" #: resources/qml/Actions.qml:338 msgctxt "@action:inmenu menubar:edit" msgid "&Group Models" msgstr "&Ryhmittele mallit" #: resources/qml/Actions.qml:358 msgctxt "@action:inmenu menubar:edit" msgid "Ungroup Models" msgstr "Poista mallien ryhmitys" #: resources/qml/Actions.qml:368 msgctxt "@action:inmenu menubar:edit" msgid "&Merge Models" msgstr "&Yhdistä mallit" #: resources/qml/Actions.qml:378 msgctxt "@action:inmenu" msgid "&Multiply Model..." msgstr "&Kerro malli..." #: resources/qml/Actions.qml:385 msgctxt "@action:inmenu menubar:edit" msgid "Select All Models" msgstr "Valitse kaikki mallit" #: resources/qml/Actions.qml:395 msgctxt "@action:inmenu menubar:edit" msgid "Clear Build Plate" msgstr "Tyhjennä tulostusalusta" #: resources/qml/Actions.qml:405 msgctxt "@action:inmenu menubar:file" msgid "Reload All Models" msgstr "Lataa kaikki mallit uudelleen" #: resources/qml/Actions.qml:414 msgctxt "@action:inmenu menubar:edit" msgid "Arrange All Models" msgstr "Järjestä kaikki mallit" #: resources/qml/Actions.qml:422 msgctxt "@action:inmenu menubar:edit" msgid "Arrange Selection" msgstr "Järjestä valinta" #: resources/qml/Actions.qml:429 msgctxt "@action:inmenu menubar:edit" msgid "Reset All Model Positions" msgstr "Määritä kaikkien mallien positiot uudelleen" #: resources/qml/Actions.qml:436 msgctxt "@action:inmenu menubar:edit" msgid "Reset All Model Transformations" msgstr "Määritä kaikkien mallien muutokset uudelleen" #: resources/qml/Actions.qml:445 msgctxt "@action:inmenu menubar:file" msgid "&Open File(s)..." msgstr "&Avaa tiedosto(t)..." #: resources/qml/Actions.qml:455 msgctxt "@action:inmenu menubar:file" msgid "&New Project..." msgstr "&Uusi projekti..." #: resources/qml/Actions.qml:462 msgctxt "@action:inmenu menubar:help" msgid "Show Configuration Folder" msgstr "Näytä määrityskansio" #: resources/qml/Actions.qml:469 resources/qml/Settings/SettingView.qml:476 msgctxt "@action:menu" msgid "Configure setting visibility..." msgstr "Määritä asetusten näkyvyys..." #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32 msgctxt "@label:button" msgid "My printers" msgstr "" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34 msgctxt "@tooltip:button" msgid "Monitor printers in Ultimaker Digital Factory." msgstr "" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41 msgctxt "@tooltip:button" msgid "Create print projects in Digital Library." msgstr "" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46 msgctxt "@label:button" msgid "Print jobs" msgstr "" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48 msgctxt "@tooltip:button" msgid "Monitor print jobs and reprint from your print history." msgstr "" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55 msgctxt "@tooltip:button" msgid "Extend UltiMaker Cura with plugins and material profiles." msgstr "" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62 msgctxt "@tooltip:button" msgid "Become a 3D printing expert with UltiMaker e-learning." msgstr "" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67 msgctxt "@label:button" msgid "UltiMaker support" msgstr "" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69 msgctxt "@tooltip:button" msgid "Learn how to get started with UltiMaker Cura." msgstr "" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74 msgctxt "@label:button" msgid "Ask a question" msgstr "" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76 msgctxt "@tooltip:button" msgid "Consult the UltiMaker Community." msgstr "" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81 msgctxt "@label:button" msgid "Report a bug" msgstr "" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83 msgctxt "@tooltip:button" msgid "Let developers know that something is going wrong." msgstr "" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90 msgctxt "@tooltip:button" msgid "Visit the UltiMaker website." msgstr "" #: resources/qml/ColorDialog.qml:110 msgctxt "@label" msgid "Hex" msgstr "" #: resources/qml/Cura.qml:256 msgctxt "@label" msgid "This package will be installed after restarting." msgstr "" #: resources/qml/Cura.qml:467 resources/qml/Preferences/GeneralPage.qml:14 msgctxt "@title:tab" msgid "General" msgstr "Yleiset" #: resources/qml/Cura.qml:470 msgctxt "@title:tab" msgid "Settings" msgstr "Asetukset" #: resources/qml/Cura.qml:472 resources/qml/Preferences/MachinesPage.qml:17 msgctxt "@title:tab" msgid "Printers" msgstr "Tulostimet" #: resources/qml/Cura.qml:474 #: resources/qml/Preferences/Materials/MaterialsPage.qml:70 msgctxt "@title:tab" msgid "Materials" msgstr "Materiaalit" #: resources/qml/Cura.qml:476 resources/qml/Preferences/ProfilesPage.qml:57 msgctxt "@title:tab" msgid "Profiles" msgstr "Profiilit" #: resources/qml/Cura.qml:581 msgctxt "@title:window %1 is the application name" msgid "Closing %1" msgstr "" #: resources/qml/Cura.qml:582 resources/qml/Cura.qml:591 msgctxt "@label %1 is the application name" msgid "Are you sure you want to exit %1?" msgstr "" #: resources/qml/Cura.qml:629 #: resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16 msgctxt "@title:window" msgid "Open file(s)" msgstr "Avaa tiedosto(t)" #: resources/qml/Cura.qml:734 msgctxt "@window:title" msgid "Install Package" msgstr "" #: resources/qml/Cura.qml:741 msgctxt "@title:window" msgid "Open File(s)" msgstr "Avaa tiedosto(t)" #: resources/qml/Cura.qml:743 msgctxt "@text:window" msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one." msgstr "Löysimme vähintään yhden Gcode-tiedoston valitsemiesi tiedostojen joukosta. Voit avata vain yhden Gcode-tiedoston kerrallaan. Jos haluat avata Gcode-tiedoston, valitse vain yksi." #: resources/qml/Cura.qml:828 msgctxt "@title:window" msgid "Add Printer" msgstr "Lisää tulostin" #: resources/qml/Cura.qml:836 msgctxt "@title:window" msgid "What's New" msgstr "" #: resources/qml/Cura.qml:890 msgctxt "@title:window" msgid "Save Custom Profile" msgstr "" #: resources/qml/Cura.qml:891 msgctxt "@textfield:placeholder" msgid "New Custom Profile" msgstr "" #: resources/qml/Cura.qml:892 msgctxt "@info" msgid "Custom profile name:" msgstr "" #: resources/qml/Cura.qml:909 msgctxt "@label %i will be replaced with a profile name" msgid "Only user changed settings will be saved in the custom profile.
    For materials that support it, the new custom profile will inherit properties from %1." msgstr "" #: resources/qml/Cura.qml:917 msgctxt "@action:button" msgid "Learn more about Cura print profiles" msgstr "" #: resources/qml/Cura.qml:926 msgctxt "@button" msgid "Save new profile" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:15 msgctxt "@title:window The argument is the application name." msgid "About %1" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:59 msgctxt "@label" msgid "version: %1" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:74 msgctxt "@label" msgid "End-to-end solution for fused filament 3D printing." msgstr "Kokonaisvaltainen sulatettavan tulostuslangan 3D-tulostusratkaisu." #: resources/qml/Dialogs/AboutDialog.qml:87 msgctxt "@info:credit" msgid "" "Cura is developed by UltiMaker in cooperation with the community.\n" "Cura proudly uses the following open source projects:" msgstr "" "Cura-ohjelman on kehittänyt Ultimaker B.V. yhteistyössä käyttäjäyhteisön kanssa.\n" "Cura hyödyntää seuraavia avoimeen lähdekoodiin perustuvia projekteja:" #: resources/qml/Dialogs/AboutDialog.qml:138 msgctxt "@label Description for application component" msgid "Graphical user interface" msgstr "Graafinen käyttöliittymä" #: resources/qml/Dialogs/AboutDialog.qml:139 msgctxt "@label Description for application component" msgid "Application framework" msgstr "Sovelluskehys" #: resources/qml/Dialogs/AboutDialog.qml:140 msgctxt "@label Description for application component" msgid "G-code generator" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:141 msgctxt "@label Description for application component" msgid "Interprocess communication library" msgstr "Prosessien välinen tietoliikennekirjasto" #: resources/qml/Dialogs/AboutDialog.qml:142 msgctxt "@label Description for application component" msgid "Python bindings for libnest2d" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:143 msgctxt "@label Description for application component" msgid "Polygon packing library, developed by Prusa Research" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:144 msgctxt "@label Description for application component" msgid "Support library for handling 3MF files" msgstr "Tukikirjasto 3MF-tiedostojen käsittelyyn" #: resources/qml/Dialogs/AboutDialog.qml:145 msgctxt "@label Description for application component" msgid "Support library for file metadata and streaming" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:148 msgctxt "@label Description for application dependency" msgid "Programming language" msgstr "Ohjelmointikieli" #: resources/qml/Dialogs/AboutDialog.qml:149 msgctxt "@label Description for application dependency" msgid "GUI framework" msgstr "GUI-kehys" #: resources/qml/Dialogs/AboutDialog.qml:150 msgctxt "@label Description for application dependency" msgid "GUI framework bindings" msgstr "GUI-kehyksen sidonnat" #: resources/qml/Dialogs/AboutDialog.qml:151 msgctxt "@label Description for application dependency" msgid "C/C++ Binding library" msgstr "C/C++ -sidontakirjasto" #: resources/qml/Dialogs/AboutDialog.qml:152 msgctxt "@label Description for application dependency" msgid "Data interchange format" msgstr "Data Interchange Format" #: resources/qml/Dialogs/AboutDialog.qml:153 msgctxt "@label" msgid "Font" msgstr "Fontti" #: resources/qml/Dialogs/AboutDialog.qml:156 msgctxt "@label Description for application dependency" msgid "Polygon clipping library" msgstr "Monikulmion leikkauskirjasto" #: resources/qml/Dialogs/AboutDialog.qml:157 msgctxt "@label Description for application dependency" msgid "JSON parser" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:158 msgctxt "@label Description for application dependency" msgid "Utility functions, including an image loader" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:159 msgctxt "@label Description for application dependency" msgid "Utility library, including Voronoi generation" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:162 #: resources/qml/Dialogs/AboutDialog.qml:163 msgctxt "@label Description for application dependency" msgid "Root Certificates for validating SSL trustworthiness" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:164 msgctxt "@label Description for application dependency" msgid "Compatibility between Python 2 and 3" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:165 msgctxt "@label Description for application dependency" msgid "Support library for system keyring access" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:166 msgctxt "@label Description for application dependency" msgid "Support library for faster math" msgstr "Nopeamman laskennan tukikirjasto" #: resources/qml/Dialogs/AboutDialog.qml:167 msgctxt "@label Description for application dependency" msgid "Support library for handling STL files" msgstr "STL-tiedostojen käsittelyn tukikirjasto" #: resources/qml/Dialogs/AboutDialog.qml:168 msgctxt "@label Description for application dependency" msgid "Python bindings for Clipper" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:169 msgctxt "@label Description for application dependency" msgid "Serial communication library" msgstr "Sarjatietoliikennekirjasto" #: resources/qml/Dialogs/AboutDialog.qml:170 msgctxt "@label Description for application dependency" msgid "Support library for scientific computing" msgstr "Tieteellisen laskennan tukikirjasto" #: resources/qml/Dialogs/AboutDialog.qml:171 msgctxt "@Label Description for application dependency" msgid "Python Error tracking library" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:172 msgctxt "@label Description for application dependency" msgid "Support library for handling triangular meshes" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:173 msgctxt "@label Description for application dependency" msgid "ZeroConf discovery library" msgstr "ZeroConf-etsintäkirjasto" #: resources/qml/Dialogs/AboutDialog.qml:176 msgctxt "@label Description for development tool" msgid "Universal build system configuration" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:177 msgctxt "@label Description for development tool" msgid "Dependency and package manager" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:178 msgctxt "@label Description for development tool" msgid "Packaging Python-applications" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:179 msgctxt "@label Description for development tool" msgid "Linux cross-distribution application deployment" msgstr "" #: resources/qml/Dialogs/AboutDialog.qml:180 msgctxt "@label Description for development tool" msgid "Generating Windows installers" msgstr "" #: resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17 msgctxt "@title:window" msgid "Open project file" msgstr "Avaa projektitiedosto" #: resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:84 msgctxt "@text:window" msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?" msgstr "Tämä on Cura-projektitiedosto. Haluatko avata sen projektina vai tuoda siinä olevat mallit?" #: resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91 msgctxt "@text:window" msgid "Remember my choice" msgstr "Muista valintani" #: resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105 msgctxt "@action:button" msgid "Open as project" msgstr "Avaa projektina" #: resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110 msgctxt "@action:button" msgid "Import models" msgstr "Tuo mallit" #: resources/qml/Dialogs/ChoosePrinterDialog.qml:17 msgctxt "@title:window" msgid "Select Printer" msgstr "" #: resources/qml/Dialogs/ChoosePrinterDialog.qml:54 msgctxt "@title:label" msgid "Compatible Printers" msgstr "" #: resources/qml/Dialogs/ChoosePrinterDialog.qml:110 msgctxt "@description" msgid "No compatible printers, that are currently online, were found." msgstr "" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:13 msgctxt "@title:window" msgid "Discard or Keep changes" msgstr "Hylkää tai säilytä muutokset" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:64 msgctxt "@text:window, %1 is a profile name" msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'." msgstr "" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:90 msgctxt "@title:column" msgid "Profile settings" msgstr "Profiilin asetukset" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:92 msgctxt "@title:column" msgid "Current changes" msgstr "" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:123 #: resources/qml/Preferences/GeneralPage.qml:820 msgctxt "@option:discardOrKeep" msgid "Always ask me this" msgstr "Kysy aina" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:124 msgctxt "@option:discardOrKeep" msgid "Discard and never ask again" msgstr "Hylkää äläkä kysy uudelleen" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125 msgctxt "@option:discardOrKeep" msgid "Keep and never ask again" msgstr "Säilytä äläkä kysy uudelleen" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:157 msgctxt "@action:button" msgid "Discard changes" msgstr "" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:164 msgctxt "@action:button" msgid "Keep changes" msgstr "" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:171 msgctxt "@action:button" msgid "Save as new custom profile" msgstr "" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:178 msgctxt "@action:button" msgid "Save changes" msgstr "" #: resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47 msgctxt "@text:window" msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?" msgstr "Löysimme vähintään yhden projektitiedoston valitsemiesi tiedostojen joukosta. Voit avata vain yhden projektitiedoston kerrallaan. Suosittelemme, että tuot vain malleja niistä tiedostoista. Haluatko jatkaa?" #: resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64 msgctxt "@action:button" msgid "Import all as models" msgstr "Tuo kaikki malleina" #: resources/qml/Dialogs/RenameDialog.qml:23 msgctxt "@title:window" msgid "Rename" msgstr "" #: resources/qml/Dialogs/RenameDialog.qml:24 msgctxt "@info" msgid "Please provide a new name." msgstr "" #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14 msgctxt "@title:window" msgid "Save Project" msgstr "Tallenna projekti" #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:177 msgctxt "@action:label" msgid "Extruder %1" msgstr "Suulake %1" #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193 msgctxt "@action:label" msgid "%1 & material" msgstr "%1 & materiaali" #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:195 msgctxt "@action:label" msgid "Material" msgstr "" #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284 msgctxt "@action:label" msgid "Don't show project summary on save again" msgstr "Älä näytä projektin yhteenvetoa tallennettaessa" #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:298 msgctxt "@action:button" msgid "Save" msgstr "Tallenna" #: resources/qml/JobSpecs.qml:93 msgctxt "@text Print job name" msgid "Untitled" msgstr "" #: resources/qml/MainWindow/ApplicationMenu.qml:63 #: resources/qml/Menus/SettingsMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&Settings" msgstr "" #: resources/qml/MainWindow/ApplicationMenu.qml:87 msgctxt "@title:window" msgid "New project" msgstr "Uusi projekti" #: resources/qml/MainWindow/ApplicationMenu.qml:88 msgctxt "@info:question" msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings." msgstr "Haluatko varmasti aloittaa uuden projektin? Se tyhjentää alustan ja kaikki tallentamattomat asetukset." #: resources/qml/MainWindow/MainWindowHeader.qml:135 msgctxt "@action:button" msgid "Marketplace" msgstr "" #: resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18 msgctxt "@header" msgid "Configurations" msgstr "" #: resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137 msgctxt "@label" msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile." msgstr "" #: resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138 msgctxt "@label" msgid "Marketplace" msgstr "" #: resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52 msgctxt "@label" msgid "Loading available configurations from the printer..." msgstr "" #: resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53 msgctxt "@label" msgid "The configurations are not available because the printer is disconnected." msgstr "" #: resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106 msgctxt "@tooltip" msgid "The configuration of this extruder is not allowed, and prohibits slicing." msgstr "" #: resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:110 msgctxt "@tooltip" msgid "There are no profiles matching the configuration of this extruder." msgstr "" #: resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:250 msgctxt "@label" msgid "Select configuration" msgstr "" #: resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:358 msgctxt "@label" msgid "Configurations" msgstr "" #: resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27 msgctxt "@header" msgid "Custom" msgstr "" #: resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:173 msgctxt "@label" msgid "Enabled" msgstr "" #: resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:222 msgctxt "@label" msgid "Material" msgstr "Materiaali" #: resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:348 msgctxt "@label" msgid "Use glue for better adhesion with this material combination." msgstr "" #: resources/qml/Menus/ContextMenu.qml:29 msgctxt "@label" msgid "Print Selected Model With:" msgid_plural "Print Selected Models With:" msgstr[0] "Tulosta valittu malli asetuksella:" msgstr[1] "Tulosta valitut mallit asetuksella:" #: resources/qml/Menus/ContextMenu.qml:92 msgctxt "@title:window" msgid "Multiply Selected Model" msgid_plural "Multiply Selected Models" msgstr[0] "Kerro valittu malli" msgstr[1] "Kerro valitut mallit" #: resources/qml/Menus/ContextMenu.qml:123 msgctxt "@label" msgid "Number of Copies" msgstr "Kopioiden määrä" #: resources/qml/Menus/EditMenu.qml:12 msgctxt "@title:menu menubar:toplevel" msgid "&Edit" msgstr "&Muokkaa" #: resources/qml/Menus/ExtensionMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "E&xtensions" msgstr "Laa&jennukset" #: resources/qml/Menus/FileMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&File" msgstr "Tie&dosto" #: resources/qml/Menus/FileMenu.qml:45 msgctxt "@title:menu menubar:file" msgid "&Save Project..." msgstr "" #: resources/qml/Menus/FileMenu.qml:78 msgctxt "@title:menu menubar:file" msgid "&Export..." msgstr "" #: resources/qml/Menus/FileMenu.qml:89 msgctxt "@action:inmenu menubar:file" msgid "Export Selection..." msgstr "" #: resources/qml/Menus/HelpMenu.qml:14 msgctxt "@title:menu menubar:toplevel" msgid "&Help" msgstr "&Ohje" #: resources/qml/Menus/MaterialMenu.qml:13 msgctxt "@label:category menu label" msgid "Material" msgstr "" #: resources/qml/Menus/MaterialMenu.qml:53 msgctxt "@label:category menu label" msgid "Favorites" msgstr "" #: resources/qml/Menus/MaterialMenu.qml:78 msgctxt "@label:category menu label" msgid "Generic" msgstr "" #: resources/qml/Menus/OpenFilesMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Open File(s)..." msgstr "" #: resources/qml/Menus/PreferencesMenu.qml:21 msgctxt "@title:menu menubar:toplevel" msgid "P&references" msgstr "L&isäasetukset" #: resources/qml/Menus/PrinterMenu.qml:13 msgctxt "@title:menu menubar:settings" msgid "&Printer" msgstr "&Tulostin" #: resources/qml/Menus/PrinterMenu.qml:17 msgctxt "@label:category menu label" msgid "Network enabled printers" msgstr "" #: resources/qml/Menus/PrinterMenu.qml:50 msgctxt "@label:category menu label" msgid "Local printers" msgstr "" #: resources/qml/Menus/RecentFilesMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Open &Recent" msgstr "Avaa &viimeisin" #: resources/qml/Menus/SaveProjectMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Save Project..." msgstr "" #: resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16 msgctxt "@action:inmenu" msgid "Visible Settings" msgstr "" #: resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42 msgctxt "@action:inmenu" msgid "Collapse All Categories" msgstr "" #: resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51 msgctxt "@action:inmenu" msgid "Manage Setting Visibility..." msgstr "" #: resources/qml/Menus/SettingsMenu.qml:34 msgctxt "@title:menu" msgid "&Material" msgstr "&Materiaali" #: resources/qml/Menus/SettingsMenu.qml:49 msgctxt "@action:inmenu" msgid "Set as Active Extruder" msgstr "Aseta aktiiviseksi suulakepuristimeksi" #: resources/qml/Menus/SettingsMenu.qml:55 msgctxt "@action:inmenu" msgid "Enable Extruder" msgstr "" #: resources/qml/Menus/SettingsMenu.qml:63 msgctxt "@action:inmenu" msgid "Disable Extruder" msgstr "" #: resources/qml/Menus/ViewMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&View" msgstr "&Näytä" #: resources/qml/Menus/ViewMenu.qml:17 msgctxt "@action:inmenu menubar:view" msgid "&Camera position" msgstr "" #: resources/qml/Menus/ViewMenu.qml:30 msgctxt "@action:inmenu menubar:view" msgid "Camera view" msgstr "" #: resources/qml/Menus/ViewMenu.qml:48 msgctxt "@action:inmenu menubar:view" msgid "Perspective" msgstr "" #: resources/qml/Menus/ViewMenu.qml:59 msgctxt "@action:inmenu menubar:view" msgid "Orthographic" msgstr "" #: resources/qml/MonitorButton.qml:115 msgctxt "@label:MonitorStatus" msgid "Not connected to a printer" msgstr "Ei yhteyttä tulostimeen" #: resources/qml/MonitorButton.qml:119 msgctxt "@label:MonitorStatus" msgid "Printer does not accept commands" msgstr "Tulostin ei hyväksy komentoja" #: resources/qml/MonitorButton.qml:129 msgctxt "@label:MonitorStatus" msgid "In maintenance. Please check the printer" msgstr "Huolletaan. Tarkista tulostin" #: resources/qml/MonitorButton.qml:140 msgctxt "@label:MonitorStatus" msgid "Lost connection with the printer" msgstr "Yhteys tulostimeen menetetty" #: resources/qml/MonitorButton.qml:142 msgctxt "@label:MonitorStatus" msgid "Printing..." msgstr "Tulostetaan..." #: resources/qml/MonitorButton.qml:145 msgctxt "@label:MonitorStatus" msgid "Paused" msgstr "Keskeytetty" #: resources/qml/MonitorButton.qml:148 msgctxt "@label:MonitorStatus" msgid "Preparing..." msgstr "Valmistellaan..." #: resources/qml/MonitorButton.qml:150 msgctxt "@label:MonitorStatus" msgid "Please remove the print" msgstr "Poista tuloste" #: resources/qml/MonitorButton.qml:318 msgctxt "@label" msgid "Abort Print" msgstr "" #: resources/qml/MonitorButton.qml:327 msgctxt "@label" msgid "Are you sure you want to abort the print?" msgstr "Haluatko varmasti keskeyttää tulostuksen?" #: resources/qml/ObjectItemButton.qml:109 msgctxt "@label" msgid "Is printed as support." msgstr "" #: resources/qml/ObjectItemButton.qml:112 msgctxt "@label" msgid "Other models overlapping with this model are modified." msgstr "" #: resources/qml/ObjectItemButton.qml:115 msgctxt "@label" msgid "Infill overlapping with this model is modified." msgstr "" #: resources/qml/ObjectItemButton.qml:118 msgctxt "@label" msgid "Overlaps with this model are not supported." msgstr "" #: resources/qml/ObjectItemButton.qml:125 msgctxt "@label %1 is the number of settings it overrides." msgid "Overrides %1 setting." msgid_plural "Overrides %1 settings." msgstr[0] "" msgstr[1] "" #: resources/qml/ObjectSelector.qml:59 msgctxt "@label" msgid "Object list" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:134 #: resources/qml/Preferences/SettingVisibilityPage.qml:24 msgctxt "@action:button" msgid "Defaults" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:172 msgctxt "@label" msgid "Interface" msgstr "Käyttöliittymä" #: resources/qml/Preferences/GeneralPage.qml:215 msgctxt "@heading" msgid "-- incomplete --" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:261 msgctxt "@label" msgid "Currency:" msgstr "Valuutta:" #: resources/qml/Preferences/GeneralPage.qml:277 msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed." msgid "Theme*:" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:323 msgctxt "@info:tooltip" msgid "Slice automatically when changing settings." msgstr "Viipaloi automaattisesti, kun asetuksia muutetaan." #: resources/qml/Preferences/GeneralPage.qml:331 msgctxt "@option:check" msgid "Slice automatically" msgstr "Viipaloi automaattisesti" #: resources/qml/Preferences/GeneralPage.qml:340 msgctxt "@info:tooltip" msgid "Show an icon and notifications in the system notification area." msgstr "" #: resources/qml/Preferences/GeneralPage.qml:348 msgctxt "@option:check" msgid "Add icon to system tray *" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:357 msgctxt "@label" msgid "*You will need to restart the application for these changes to have effect." msgstr "" #: resources/qml/Preferences/GeneralPage.qml:373 msgctxt "@label" msgid "Viewport behavior" msgstr "Näyttöikkunan käyttäytyminen" #: resources/qml/Preferences/GeneralPage.qml:381 msgctxt "@info:tooltip" msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly." msgstr "Korosta mallin vailla tukea olevat alueet punaisella. Ilman tukea nämä alueet eivät tulostu kunnolla." #: resources/qml/Preferences/GeneralPage.qml:390 msgctxt "@option:check" msgid "Display overhang" msgstr "Näytä uloke" #: resources/qml/Preferences/GeneralPage.qml:400 msgctxt "@info:tooltip" msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry." msgstr "" #: resources/qml/Preferences/GeneralPage.qml:409 msgctxt "@option:check" msgid "Display model errors" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:417 msgctxt "@info:tooltip" msgid "Moves the camera so the model is in the center of the view when a model is selected" msgstr "Siirtää kameraa siten, että valittuna oleva malli on näkymän keskellä" #: resources/qml/Preferences/GeneralPage.qml:422 msgctxt "@action:button" msgid "Center camera when item is selected" msgstr "Keskitä kamera kun kohde on valittu" #: resources/qml/Preferences/GeneralPage.qml:432 msgctxt "@info:tooltip" msgid "Should the default zoom behavior of cura be inverted?" msgstr "Pitääkö Curan oletusarvoinen zoom-toimintatapa muuttaa päinvastaiseksi?" #: resources/qml/Preferences/GeneralPage.qml:437 msgctxt "@action:button" msgid "Invert the direction of camera zoom." msgstr "Käännä kameran zoomin suunta päinvastaiseksi." #: resources/qml/Preferences/GeneralPage.qml:453 msgctxt "@info:tooltip" msgid "Should zooming move in the direction of the mouse?" msgstr "Tuleeko zoomauksen siirtyä hiiren suuntaan?" #: resources/qml/Preferences/GeneralPage.qml:453 msgctxt "@info:tooltip" msgid "Zooming towards the mouse is not supported in the orthographic perspective." msgstr "" #: resources/qml/Preferences/GeneralPage.qml:458 msgctxt "@action:button" msgid "Zoom toward mouse direction" msgstr "Zoomaa hiiren suuntaan" #: resources/qml/Preferences/GeneralPage.qml:484 msgctxt "@info:tooltip" msgid "Should models on the platform be moved so that they no longer intersect?" msgstr "Pitäisikö alustalla olevia malleja siirtää niin, etteivät ne enää leikkaa toisiaan?" #: resources/qml/Preferences/GeneralPage.qml:489 msgctxt "@option:check" msgid "Ensure models are kept apart" msgstr "Varmista, että mallit ovat erillään" #: resources/qml/Preferences/GeneralPage.qml:498 msgctxt "@info:tooltip" msgid "Should models on the platform be moved down to touch the build plate?" msgstr "Pitäisikö tulostusalueella olevia malleja siirtää alas niin, että ne koskettavat tulostusalustaa?" #: resources/qml/Preferences/GeneralPage.qml:503 msgctxt "@option:check" msgid "Automatically drop models to the build plate" msgstr "Pudota mallit automaattisesti alustalle" #: resources/qml/Preferences/GeneralPage.qml:515 msgctxt "@info:tooltip" msgid "Show caution message in g-code reader." msgstr "" #: resources/qml/Preferences/GeneralPage.qml:524 msgctxt "@option:check" msgid "Caution message in g-code reader" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:532 msgctxt "@info:tooltip" msgid "Should layer be forced into compatibility mode?" msgstr "Pakotetaanko kerros yhteensopivuustilaan?" #: resources/qml/Preferences/GeneralPage.qml:537 msgctxt "@option:check" msgid "Force layer view compatibility mode (restart required)" msgstr "Pakota kerrosnäkymän yhteensopivuustila (vaatii uudelleenkäynnistyksen)" #: resources/qml/Preferences/GeneralPage.qml:547 msgctxt "@info:tooltip" msgid "Should Cura open at the location it was closed?" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:552 msgctxt "@option:check" msgid "Restore window position on start" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:562 msgctxt "@info:tooltip" msgid "What type of camera rendering should be used?" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:569 msgctxt "@window:text" msgid "Camera rendering:" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:576 msgid "Perspective" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:577 msgid "Orthographic" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:617 msgctxt "@label" msgid "Opening and saving files" msgstr "Tiedostojen avaaminen ja tallentaminen" #: resources/qml/Preferences/GeneralPage.qml:624 msgctxt "@info:tooltip" msgid "Should opening files from the desktop or external applications open in the same instance of Cura?" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:629 msgctxt "@option:check" msgid "Use a single instance of Cura" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:640 msgctxt "@info:tooltip" msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:646 msgctxt "@option:check" msgid "Clear buildplate before loading model into the single instance" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:656 msgctxt "@info:tooltip" msgid "Should models be scaled to the build volume if they are too large?" msgstr "Pitäisikö mallit skaalata tulostustilavuuteen, jos ne ovat liian isoja?" #: resources/qml/Preferences/GeneralPage.qml:661 msgctxt "@option:check" msgid "Scale large models" msgstr "Skaalaa suuret mallit" #: resources/qml/Preferences/GeneralPage.qml:671 msgctxt "@info:tooltip" msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?" msgstr "Malli voi vaikuttaa erittäin pieneltä, jos sen koko on ilmoitettu esimerkiksi metreissä eikä millimetreissä. Pitäisikö nämä mallit suurentaa?" #: resources/qml/Preferences/GeneralPage.qml:676 msgctxt "@option:check" msgid "Scale extremely small models" msgstr "Skaalaa erittäin pienet mallit" #: resources/qml/Preferences/GeneralPage.qml:686 msgctxt "@info:tooltip" msgid "Should models be selected after they are loaded?" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:691 msgctxt "@option:check" msgid "Select models when loaded" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:701 msgctxt "@info:tooltip" msgid "Should a prefix based on the printer name be added to the print job name automatically?" msgstr "Pitäisikö tulostustyön nimeen lisätä automaattisesti tulostimen nimeen perustuva etuliite?" #: resources/qml/Preferences/GeneralPage.qml:706 msgctxt "@option:check" msgid "Add machine prefix to job name" msgstr "Lisää laitteen etuliite työn nimeen" #: resources/qml/Preferences/GeneralPage.qml:716 msgctxt "@info:tooltip" msgid "Should a summary be shown when saving a project file?" msgstr "Näytetäänkö yhteenveto, kun projektitiedosto tallennetaan?" #: resources/qml/Preferences/GeneralPage.qml:720 msgctxt "@option:check" msgid "Show summary dialog when saving project" msgstr "Näytä yhteenvetoikkuna, kun projekti tallennetaan" #: resources/qml/Preferences/GeneralPage.qml:730 msgctxt "@info:tooltip" msgid "Default behavior when opening a project file" msgstr "Projektitiedoston avaamisen oletustoimintatapa" #: resources/qml/Preferences/GeneralPage.qml:738 msgctxt "@window:text" msgid "Default behavior when opening a project file: " msgstr "Projektitiedoston avaamisen oletustoimintatapa: " #: resources/qml/Preferences/GeneralPage.qml:753 msgctxt "@option:openProject" msgid "Always ask me this" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:754 msgctxt "@option:openProject" msgid "Always open as a project" msgstr "Avaa aina projektina" #: resources/qml/Preferences/GeneralPage.qml:755 msgctxt "@option:openProject" msgid "Always import models" msgstr "Tuo mallit aina" #: resources/qml/Preferences/GeneralPage.qml:792 msgctxt "@info:tooltip" msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again." msgstr "Kun olet tehnyt muutokset profiiliin ja vaihtanut toiseen, näytetään valintaikkuna, jossa kysytään, haluatko säilyttää vai hylätä muutokset. Tässä voit myös valita oletuskäytöksen, jolloin valintaikkunaa ei näytetä uudelleen." #: resources/qml/Preferences/GeneralPage.qml:801 #: resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:46 msgctxt "@label" msgid "Profiles" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:806 msgctxt "@window:text" msgid "Default behavior for changed setting values when switching to a different profile: " msgstr "" #: resources/qml/Preferences/GeneralPage.qml:821 msgctxt "@option:discardOrKeep" msgid "Always discard changed settings" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:822 msgctxt "@option:discardOrKeep" msgid "Always transfer changed settings to new profile" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:856 msgctxt "@label" msgid "Privacy" msgstr "Tietosuoja" #: resources/qml/Preferences/GeneralPage.qml:862 msgctxt "@info:tooltip" msgid "Should anonymous data about your print be sent to UltiMaker? Note, no models, IP addresses or other personally identifiable information is sent or stored." msgstr "Pitäisikö anonyymejä tietoja tulosteesta lähettää UltiMakerille? Huomaa, että malleja, IP-osoitteita tai muita henkilökohtaisia tietoja ei lähetetä eikä tallenneta." #: resources/qml/Preferences/GeneralPage.qml:867 msgctxt "@option:check" msgid "Send (anonymous) print information" msgstr "Lähetä (anonyymit) tulostustiedot" #: resources/qml/Preferences/GeneralPage.qml:897 msgctxt "@label" msgid "Updates" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:904 msgctxt "@info:tooltip" msgid "Should Cura check for updates when the program is started?" msgstr "Pitäisikö Curan tarkistaa saatavilla olevat päivitykset, kun ohjelma käynnistetään?" #: resources/qml/Preferences/GeneralPage.qml:909 msgctxt "@option:check" msgid "Check for updates on start" msgstr "Tarkista päivitykset käynnistettäessä" #: resources/qml/Preferences/GeneralPage.qml:925 msgctxt "@info:tooltip" msgid "When checking for updates, only check for stable releases." msgstr "" #: resources/qml/Preferences/GeneralPage.qml:931 msgctxt "@option:radio" msgid "Stable releases only" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:941 msgctxt "@info:tooltip" msgid "When checking for updates, check for both stable and for beta releases." msgstr "" #: resources/qml/Preferences/GeneralPage.qml:947 msgctxt "@option:radio" msgid "Stable and Beta releases" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:957 msgctxt "@info:tooltip" msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!" msgstr "" #: resources/qml/Preferences/GeneralPage.qml:962 msgctxt "@option:check" msgid "Get notifications for plugin updates" msgstr "" #: resources/qml/Preferences/MachinesPage.qml:50 msgctxt "@action:button" msgid "Add New" msgstr "" #: resources/qml/Preferences/MachinesPage.qml:147 #: resources/qml/Preferences/Materials/MaterialsPage.qml:160 #: resources/qml/Preferences/ProfilesPage.qml:294 msgctxt "@action:button" msgid "Activate" msgstr "Aktivoi" #: resources/qml/Preferences/MachinesPage.qml:159 #: resources/qml/Preferences/ProfilesPage.qml:331 msgctxt "@action:button" msgid "Rename" msgstr "Nimeä uudelleen" #: resources/qml/Preferences/Materials/MaterialsPage.qml:72 msgctxt "@label" msgid "Materials compatible with active printer:" msgstr "" #: resources/qml/Preferences/Materials/MaterialsPage.qml:78 #: resources/qml/Preferences/ProfilesPage.qml:94 msgctxt "@action:button" msgid "Create new" msgstr "" #: resources/qml/Preferences/Materials/MaterialsPage.qml:90 #: resources/qml/Preferences/ProfilesPage.qml:88 msgctxt "@action:button" msgid "Import" msgstr "Tuo" #: resources/qml/Preferences/Materials/MaterialsPage.qml:101 msgctxt "@action:button" msgid "Sync with Printers" msgstr "" #: resources/qml/Preferences/Materials/MaterialsPage.qml:174 #: resources/qml/Preferences/ProfilesPage.qml:311 msgctxt "@action:button" msgid "Duplicate" msgstr "Jäljennös" #: resources/qml/Preferences/Materials/MaterialsPage.qml:198 #: resources/qml/Preferences/ProfilesPage.qml:342 msgctxt "@action:button" msgid "Export" msgstr "Vie" #: resources/qml/Preferences/Materials/MaterialsPage.qml:212 #: resources/qml/Preferences/ProfilesPage.qml:392 msgctxt "@title:window" msgid "Confirm Remove" msgstr "" #: resources/qml/Preferences/Materials/MaterialsPage.qml:215 #: resources/qml/Preferences/ProfilesPage.qml:393 msgctxt "@label (%1 is object name)" msgid "Are you sure you wish to remove %1? This cannot be undone!" msgstr "" #: resources/qml/Preferences/Materials/MaterialsPage.qml:228 #: resources/qml/Preferences/Materials/MaterialsPage.qml:238 msgctxt "@title:window" msgid "Import Material" msgstr "Tuo materiaali" #: resources/qml/Preferences/Materials/MaterialsPage.qml:242 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" msgstr "Materiaalin tuominen onnistui: %1" #: resources/qml/Preferences/Materials/MaterialsPage.qml:245 msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not import material %1: %2" msgstr "Materiaalin tuominen epäonnistui: %1: %2" #: resources/qml/Preferences/Materials/MaterialsPage.qml:256 #: resources/qml/Preferences/Materials/MaterialsPage.qml:267 msgctxt "@title:window" msgid "Export Material" msgstr "Vie materiaali" #: resources/qml/Preferences/Materials/MaterialsPage.qml:272 msgctxt "@info:status Don't translate the XML tags and !" msgid "Failed to export material to %1: %2" msgstr "Materiaalin vieminen epäonnistui kohteeseen %1: %2" #: resources/qml/Preferences/Materials/MaterialsPage.qml:275 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully exported material to %1" msgstr "Materiaalin vieminen onnistui kohteeseen %1" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:18 msgctxt "@title:window" msgid "Sync materials with printers" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:49 msgctxt "@title:header" msgid "Sync materials with printers" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:55 msgctxt "@text" msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers." msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77 msgctxt "@button" msgid "Why do I need to sync material profiles?" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:86 msgctxt "@button" msgid "Start" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:144 msgctxt "@title:header" msgid "Sign in" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:150 msgctxt "@text" msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura." msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:174 #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:462 #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:602 msgctxt "@button" msgid "Sync materials with USB" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207 msgctxt "@title:header" msgid "The following printers will receive the new material profiles:" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214 msgctxt "@title:header" msgid "Something went wrong when sending the materials to the printers." msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:221 msgctxt "@title:header" msgid "Material profiles successfully synced with the following printers:" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:258 #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:445 msgctxt "@button" msgid "Troubleshooting" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:422 msgctxt "@text Asking the user whether printers are missing in a list." msgid "Printers missing?" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:424 msgctxt "@text" msgid "Make sure all your printers are turned ON and connected to Digital Factory." msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:433 msgctxt "@button" msgid "Refresh List" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:473 msgctxt "@button" msgid "Try again" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:477 #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:712 msgctxt "@button" msgid "Done" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:479 #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:622 msgctxt "@button" msgid "Sync" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:535 msgctxt "@button" msgid "Syncing" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:553 msgctxt "@title:header" msgid "No printers found" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:574 msgctxt "@text" msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware." msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:585 msgctxt "@button" msgid "Learn how to connect your printer to Digital Factory" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:613 msgctxt "@button" msgid "Refresh" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:642 msgctxt "@title:header" msgid "Sync material profiles via USB" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:648 msgctxt "@text In the UI this is followed by a list of steps the user needs to take." msgid "Follow the following steps to load the new material profiles to your printer." msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679 msgctxt "@text" msgid "Click the export material archive button." msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680 msgctxt "@text" msgid "Save the .umm file on a USB stick." msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681 msgctxt "@text" msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles." msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689 msgctxt "@button" msgid "How to load new material profiles to my printer" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:703 #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:299 msgctxt "@button" msgid "Back" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:712 msgctxt "@button" msgid "Export material archive" msgstr "" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:747 msgctxt "@title:window" msgid "Export All Materials" msgstr "" #: resources/qml/Preferences/Materials/MaterialsView.qml:121 msgctxt "@title:window" msgid "Confirm Diameter Change" msgstr "" #: resources/qml/Preferences/Materials/MaterialsView.qml:122 msgctxt "@label (%1 is a number)" msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?" msgstr "" #: resources/qml/Preferences/Materials/MaterialsView.qml:152 msgctxt "@label" msgid "Display Name" msgstr "Näytä nimi" #: resources/qml/Preferences/Materials/MaterialsView.qml:171 msgctxt "@label" msgid "Brand" msgstr "Merkki" #: resources/qml/Preferences/Materials/MaterialsView.qml:190 msgctxt "@label" msgid "Material Type" msgstr "Materiaalin tyyppi" #: resources/qml/Preferences/Materials/MaterialsView.qml:210 msgctxt "@label" msgid "Color" msgstr "Väri" #: resources/qml/Preferences/Materials/MaterialsView.qml:262 msgctxt "@title" msgid "Material color picker" msgstr "" #: resources/qml/Preferences/Materials/MaterialsView.qml:275 msgctxt "@label" msgid "Properties" msgstr "Ominaisuudet" #: resources/qml/Preferences/Materials/MaterialsView.qml:286 msgctxt "@label" msgid "Density" msgstr "Tiheys" #: resources/qml/Preferences/Materials/MaterialsView.qml:319 msgctxt "@label" msgid "Diameter" msgstr "Läpimitta" #: resources/qml/Preferences/Materials/MaterialsView.qml:369 msgctxt "@label" msgid "Filament Cost" msgstr "Tulostuslangan hinta" #: resources/qml/Preferences/Materials/MaterialsView.qml:401 msgctxt "@label" msgid "Filament weight" msgstr "Tulostuslangan paino" #: resources/qml/Preferences/Materials/MaterialsView.qml:433 msgctxt "@label" msgid "Filament length" msgstr "Tulostuslangan pituus" #: resources/qml/Preferences/Materials/MaterialsView.qml:451 msgctxt "@label" msgid "Cost per Meter" msgstr "Hinta metriä kohden" #: resources/qml/Preferences/Materials/MaterialsView.qml:465 msgctxt "@label" msgid "This material is linked to %1 and shares some of its properties." msgstr "Materiaali on linkitetty kohteeseen %1 ja niillä on joitain samoja ominaisuuksia." #: resources/qml/Preferences/Materials/MaterialsView.qml:472 msgctxt "@label" msgid "Unlink Material" msgstr "Poista materiaalin linkitys" #: resources/qml/Preferences/Materials/MaterialsView.qml:485 msgctxt "@label" msgid "Description" msgstr "Kuvaus" #: resources/qml/Preferences/Materials/MaterialsView.qml:503 msgctxt "@label" msgid "Adhesion Information" msgstr "Tarttuvuustiedot" #: resources/qml/Preferences/Materials/MaterialsView.qml:642 msgctxt "@title" msgid "Information" msgstr "Tiedot" #: resources/qml/Preferences/Materials/MaterialsView.qml:647 #: resources/qml/PrintSetupSelector/PrintSetupSelector.qml:18 msgctxt "@label" msgid "Print settings" msgstr "Tulostusasetukset" #: resources/qml/Preferences/ProfilesPage.qml:59 msgctxt "@label" msgid "Profiles compatible with active printer:" msgstr "" #: resources/qml/Preferences/ProfilesPage.qml:98 msgctxt "@action:tooltip" msgid "Create new profile from current settings/overrides" msgstr "" #: resources/qml/Preferences/ProfilesPage.qml:125 msgctxt "@action:label" msgid "Some settings from current profile were overwritten." msgstr "" #: resources/qml/Preferences/ProfilesPage.qml:140 msgctxt "@action:button" msgid "Update profile." msgstr "" #: resources/qml/Preferences/ProfilesPage.qml:143 msgctxt "@action:tooltip" msgid "Update profile with current settings/overrides" msgstr "" #: resources/qml/Preferences/ProfilesPage.qml:148 msgctxt "@action:button" msgid "Discard current changes" msgstr "Hylkää tehdyt muutokset" #: resources/qml/Preferences/ProfilesPage.qml:158 msgctxt "@action:label" msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below." msgstr "Tässä profiilissa käytetään tulostimen oletusarvoja, joten siinä ei ole alla olevan listan asetuksia tai ohituksia." #: resources/qml/Preferences/ProfilesPage.qml:165 msgctxt "@action:label" msgid "Your current settings match the selected profile." msgstr "Nykyiset asetukset vastaavat valittua profiilia." #: resources/qml/Preferences/ProfilesPage.qml:175 msgctxt "@title:tab" msgid "Global Settings" msgstr "Yleiset asetukset" #: resources/qml/Preferences/ProfilesPage.qml:278 msgctxt "@title:window" msgid "Create Profile" msgstr "Luo profiili" #: resources/qml/Preferences/ProfilesPage.qml:280 msgctxt "@info" msgid "Please provide a name for this profile." msgstr "" #: resources/qml/Preferences/ProfilesPage.qml:352 #: resources/qml/Preferences/ProfilesPage.qml:368 msgctxt "@title:window" msgid "Export Profile" msgstr "Profiilin vienti" #: resources/qml/Preferences/ProfilesPage.qml:382 msgctxt "@title:window" msgid "Duplicate Profile" msgstr "Monista profiili" #: resources/qml/Preferences/ProfilesPage.qml:409 msgctxt "@title:window" msgid "Rename Profile" msgstr "Nimeä profiili uudelleen" #: resources/qml/Preferences/ProfilesPage.qml:422 #: resources/qml/Preferences/ProfilesPage.qml:429 msgctxt "@title:window" msgid "Import Profile" msgstr "Profiilin tuonti" #: resources/qml/Preferences/SettingVisibilityItem.qml:56 msgctxt "@item:tooltip" msgid "This setting has been hidden by the active machine and will not be visible." msgstr "" #: resources/qml/Preferences/SettingVisibilityItem.qml:73 msgctxt "@item:tooltip %1 is list of setting names" msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible." msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible." msgstr[0] "" msgstr[1] "" #: resources/qml/Preferences/SettingVisibilityPage.qml:13 msgctxt "@title:tab" msgid "Setting Visibility" msgstr "Näkyvyyden asettaminen" #: resources/qml/Preferences/SettingVisibilityPage.qml:55 msgctxt "@label:textbox" msgid "Check all" msgstr "Tarkista kaikki" #: resources/qml/PrintMonitor.qml:156 msgctxt "@label" msgid "Active print" msgstr "Aktiivinen tulostustyö" #: resources/qml/PrintMonitor.qml:164 msgctxt "@label" msgid "Job Name" msgstr "Työn nimi" #: resources/qml/PrintMonitor.qml:172 msgctxt "@label" msgid "Printing Time" msgstr "Tulostusaika" #: resources/qml/PrintMonitor.qml:180 msgctxt "@label" msgid "Estimated time left" msgstr "Aikaa jäljellä arviolta" #: resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46 msgctxt "@label" msgid "Profile" msgstr "" #: resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:136 msgctxt "@tooltip" msgid "" "Some setting/override values are different from the values stored in the profile.\n" "\n" "Click to open the profile manager." msgstr "" "Jotkut asetusten ja ohitusten arvot eroavat profiiliin tallennetuista arvoista.\n" "\n" "Avaa profiilin hallinta napsauttamalla." #: resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158 msgctxt "@label:header" msgid "Custom profiles" msgstr "" #: resources/qml/PrintSetupSelector/PrintSetupSelector.qml:20 msgctxt "@label shown when we load a Gcode file" msgid "Print setup disabled. G-code file can not be modified." msgstr "" #: resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:179 msgctxt "@button" msgid "Recommended" msgstr "" #: resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13 msgctxt "@label:Should be short" msgid "On" msgstr "" #: resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14 msgctxt "@label:Should be short" msgid "Off" msgstr "" #: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:65 msgctxt "@info, %1 is the name of the custom profile" msgid "%1 custom profile is active and you overwrote some settings." msgstr "" #: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:78 msgctxt "@info, %1 is the name of the custom profile" msgid "%1 custom profile is overriding some settings." msgstr "" #: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:92 msgctxt "@info %1 is the name of a profile" msgid "Recommended settings (for %1) were altered." msgstr "" #: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:106 msgctxt "@info %1 is the name of a profile" msgid "Some setting-values defined in %1 were overridden." msgstr "" #: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:137 msgctxt "@info" msgid "Reset to defaults." msgstr "" #: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:178 msgctxt "@info" msgid "Compare and save." msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:15 msgctxt "@label" msgid "Adhesion" msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:20 msgctxt "@label" msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards." msgstr "Ota reunuksen tai pohjaristikon tulostus käyttöön. Tämä lisää kappaleen ympärille tai alle tasaisen alueen, joka on helppo leikata pois myöhemmin." #: resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:102 msgctxt "@label" msgid "Recommended print settings" msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:111 msgctxt "@button" msgid "Show Custom" msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedResolutionSelector.qml:27 msgctxt "@label" msgid "Resolution" msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:16 msgctxt "@label" msgid "Strength" msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:20 msgctxt "@label" msgid "The following settings define the strength of your part." msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:34 msgctxt "infill_sparse_density description" msgid "Infill Density" msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:35 msgctxt "@label" msgid "Adjusts the density of infill of the print." msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:54 msgctxt "@action:label" msgid "Infill Pattern" msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:56 msgctxt "@label" msgid "" "The pattern of the infill material of the print:\n" "\n" "For quick prints of non functional model choose line, zig zag or lightning infill.\n" "\n" "For functional part not subjected to a lot of stress we recommend grid or triangle or tri hexagon.\n" "\n" "For functional 3D prints which require high strength in multiple directions use cubic, cubic subdivision, quarter cubic, octet, and gyroid." msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:67 msgctxt "@action:label" msgid "Shell Thickness" msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:68 msgctxt "@label" msgid "Defines the thickness of your part side walls, roof and floor." msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:16 msgctxt "@label" msgid "Support" msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:21 msgctxt "@label" msgid "Generate structures to support parts of the model which have overhangs. Without these structures, these parts would collapse during printing." msgstr "Muodosta rakenteita, jotka tukevat mallin ulokkeita sisältäviä osia. Ilman tukirakenteita kyseiset osat luhistuvat tulostuksen aikana." #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:40 msgctxt "@action:label" msgid "Support Type" msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:41 msgctxt "@label" msgid "" "Chooses between the techniques available to generate support. \n" "\n" "\"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \n" "\n" "\"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible." msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:53 msgctxt "@action:label" msgid "Print with" msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:54 msgctxt "@label" msgid "The extruder train to use for printing the support. This is used in multi-extrusion." msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:67 msgctxt "@action:label" msgid "Placement" msgstr "" #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:68 msgctxt "support_type description" msgid "Adjusts the placement of the support structures. The placement can be set to touching build plate or everywhere. When set to everywhere the support structures will also be printed on the model." msgstr "" #: resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:31 msgctxt "@error" msgid "Configuration not supported" msgstr "" #: resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:39 msgctxt "@message:text %1 is the name the printer uses for 'nozzle'." msgid "No profiles are available for the selected material/%1 configuration. Please change your configuration." msgstr "" #: resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:47 msgctxt "@button:label" msgid "Learn more" msgstr "" #: resources/qml/PrinterOutput/ExtruderBox.qml:40 msgctxt "@label" msgid "Extruder" msgstr "Suulake" #: resources/qml/PrinterOutput/ExtruderBox.qml:70 msgctxt "@tooltip" msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." msgstr "Kuuman pään kohdelämpötila. Kuuma pää lämpenee tai viilenee kohti tätä lämpötilaa. Jos asetus on 0, kuuman pään lämmitys sammutetaan." #: resources/qml/PrinterOutput/ExtruderBox.qml:105 msgctxt "@tooltip" msgid "The current temperature of this hotend." msgstr "" #: resources/qml/PrinterOutput/ExtruderBox.qml:182 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the hotend to." msgstr "" #: resources/qml/PrinterOutput/ExtruderBox.qml:271 #: resources/qml/PrinterOutput/HeatedBedBox.qml:259 msgctxt "@button Cancel pre-heating" msgid "Cancel" msgstr "Peruuta" #: resources/qml/PrinterOutput/ExtruderBox.qml:274 #: resources/qml/PrinterOutput/HeatedBedBox.qml:263 msgctxt "@button" msgid "Pre-heat" msgstr "Esilämmitä" #: resources/qml/PrinterOutput/ExtruderBox.qml:297 msgctxt "@tooltip of pre-heat" msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print." msgstr "" #: resources/qml/PrinterOutput/ExtruderBox.qml:335 msgctxt "@tooltip" msgid "The colour of the material in this extruder." msgstr "Tämän suulakkeen materiaalin väri." #: resources/qml/PrinterOutput/ExtruderBox.qml:367 msgctxt "@tooltip" msgid "The material in this extruder." msgstr "Tämän suulakkeen materiaali." #: resources/qml/PrinterOutput/ExtruderBox.qml:400 msgctxt "@tooltip" msgid "The nozzle inserted in this extruder." msgstr "Tähän suulakkeeseen liitetty suutin." #: resources/qml/PrinterOutput/HeatedBedBox.qml:25 msgctxt "@label" msgid "Build plate" msgstr "Alusta" #: resources/qml/PrinterOutput/HeatedBedBox.qml:55 msgctxt "@tooltip" msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off." msgstr "Lämmitettävän pöydän kohdelämpötila. Pöytä lämpenee tai viilenee kohti tätä lämpötilaa. Jos asetus on 0, pöydän lämmitys sammutetaan." #: resources/qml/PrinterOutput/HeatedBedBox.qml:88 msgctxt "@tooltip" msgid "The current temperature of the heated bed." msgstr "Lämmitettävän pöydän nykyinen lämpötila." #: resources/qml/PrinterOutput/HeatedBedBox.qml:162 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the bed to." msgstr "Lämmitettävän pöydän esilämmityslämpötila." #: resources/qml/PrinterOutput/HeatedBedBox.qml:286 msgctxt "@tooltip of pre-heat" msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print." msgstr "Lämmitä pöytä ennen tulostusta. Voit edelleen säätää tulostinta sen lämmitessä, eikä sinun tarvitse odottaa pöydän lämpiämistä, kun olet valmis tulostamaan." #: resources/qml/PrinterOutput/ManualPrinterControl.qml:51 msgctxt "@label" msgid "Printer control" msgstr "" #: resources/qml/PrinterOutput/ManualPrinterControl.qml:66 msgctxt "@label" msgid "Jog Position" msgstr "" #: resources/qml/PrinterOutput/ManualPrinterControl.qml:82 msgctxt "@label" msgid "X/Y" msgstr "" #: resources/qml/PrinterOutput/ManualPrinterControl.qml:162 msgctxt "@label" msgid "Z" msgstr "" #: resources/qml/PrinterOutput/ManualPrinterControl.qml:217 msgctxt "@label" msgid "Jog Distance" msgstr "" #: resources/qml/PrinterOutput/ManualPrinterControl.qml:257 msgctxt "@label" msgid "Send G-code" msgstr "" #: resources/qml/PrinterOutput/ManualPrinterControl.qml:319 msgctxt "@tooltip of G-code command input" msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command." msgstr "" #: resources/qml/PrinterOutput/OutputDeviceHeader.qml:55 msgctxt "@info:status" msgid "The printer is not connected." msgstr "Tulostinta ei ole yhdistetty." #: resources/qml/PrinterSelector/MachineListButton.qml:34 msgctxt "@label" msgid "Hide all connected printers" msgstr "" #: resources/qml/PrinterSelector/MachineListButton.qml:47 msgctxt "@label" msgid "Show all connected printers" msgstr "" #: resources/qml/PrinterSelector/MachineSelector.qml:64 msgctxt "@status" msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet." msgstr "" #: resources/qml/PrinterSelector/MachineSelector.qml:68 msgctxt "@status" msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection." msgstr "" #: resources/qml/PrinterSelector/MachineSelector.qml:73 msgctxt "@status" msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer." msgstr "" #: resources/qml/PrinterSelector/MachineSelector.qml:78 msgctxt "@status" msgid "The cloud connection is currently unavailable. Please check your internet connection." msgstr "" #: resources/qml/PrinterSelector/MachineSelectorList.qml:30 #: resources/qml/PrinterSelector/MachineSelectorList.qml:32 msgctxt "@label" msgid "Other printers" msgstr "" #: resources/qml/ProfileOverview.qml:36 msgctxt "@title:column" msgid "Setting" msgstr "Asetus" #: resources/qml/ProfileOverview.qml:37 msgctxt "@title:column" msgid "Profile" msgstr "Profiili" #: resources/qml/ProfileOverview.qml:38 msgctxt "@title:column" msgid "Current" msgstr "Nykyinen" #: resources/qml/ProfileOverview.qml:39 msgctxt "@title:column Unit of measurement" msgid "Unit" msgstr "" #: resources/qml/SearchBar.qml:17 msgctxt "@placeholder" msgid "Search" msgstr "" #: resources/qml/Settings/SettingCategory.qml:115 msgctxt "@label" msgid "" "Some hidden settings use values different from their normal calculated value.\n" "\n" "Click to make these settings visible." msgstr "" "Jotkin piilotetut asetukset käyttävät arvoja, jotka eroavat normaaleista lasketuista arvoista.\n" "\n" "Tee asetuksista näkyviä napsauttamalla." #: resources/qml/Settings/SettingItem.qml:84 msgctxt "@label" msgid "This setting is not used because all the settings that it influences are overridden." msgstr "" #: resources/qml/Settings/SettingItem.qml:89 msgctxt "@label Header for list of settings." msgid "Affects" msgstr "Koskee seuraavia" #: resources/qml/Settings/SettingItem.qml:94 msgctxt "@label Header for list of settings." msgid "Affected By" msgstr "Riippuu seuraavista" #: resources/qml/Settings/SettingItem.qml:196 msgctxt "@label" msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders." msgstr "" #: resources/qml/Settings/SettingItem.qml:200 msgctxt "@label" msgid "This setting is resolved from conflicting extruder-specific values:" msgstr "" #: resources/qml/Settings/SettingItem.qml:240 msgctxt "@label" msgid "" "This setting has a value that is different from the profile.\n" "\n" "Click to restore the value of the profile." msgstr "" "Tämän asetuksen arvo eroaa profiilin arvosta.\n" "\n" "Palauta profiilin arvo napsauttamalla." #: resources/qml/Settings/SettingItem.qml:340 msgctxt "@label" msgid "" "This setting is normally calculated, but it currently has an absolute value set.\n" "\n" "Click to restore the calculated value." msgstr "" "Tämä asetus on normaalisti laskettu, mutta sillä on tällä hetkellä absoluuttinen arvo.\n" "\n" "Palauta laskettu arvo napsauttamalla." #: resources/qml/Settings/SettingView.qml:48 msgctxt "@label:textbox" msgid "Search settings" msgstr "" #: resources/qml/Settings/SettingView.qml:395 msgctxt "@action:menu" msgid "Copy value to all extruders" msgstr "Kopioi arvo kaikkiin suulakepuristimiin" #: resources/qml/Settings/SettingView.qml:404 msgctxt "@action:menu" msgid "Copy all changed values to all extruders" msgstr "" #: resources/qml/Settings/SettingView.qml:440 msgctxt "@action:menu" msgid "Hide this setting" msgstr "Piilota tämä asetus" #: resources/qml/Settings/SettingView.qml:453 msgctxt "@action:menu" msgid "Don't show this setting" msgstr "Älä näytä tätä asetusta" #: resources/qml/Settings/SettingView.qml:457 msgctxt "@action:menu" msgid "Keep this setting visible" msgstr "Pidä tämä asetus näkyvissä" #: resources/qml/Toolbar.qml:142 msgctxt "@label %1 is filled in with the name of an extruder" msgid "Print Selected Model with %1" msgid_plural "Print Selected Models with %1" msgstr[0] "Tulosta valittu malli asetuksella %1" msgstr[1] "Tulosta valitut mallit asetuksella %1" #: resources/qml/ViewOrientationControls.qml:25 msgctxt "@info:tooltip" msgid "3D View" msgstr "" #: resources/qml/ViewOrientationControls.qml:38 msgctxt "@info:tooltip" msgid "Front View" msgstr "" #: resources/qml/ViewOrientationControls.qml:51 msgctxt "@info:tooltip" msgid "Top View" msgstr "" #: resources/qml/ViewOrientationControls.qml:64 msgctxt "@info:tooltip" msgid "Left View" msgstr "" #: resources/qml/ViewOrientationControls.qml:77 msgctxt "@info:tooltip" msgid "Right View" msgstr "" #: resources/qml/ViewsSelector.qml:50 msgctxt "@label" msgid "View type" msgstr "" #: resources/qml/WelcomePages/AddCloudPrintersView.qml:47 msgctxt "@label" msgid "Add a Cloud printer" msgstr "" #: resources/qml/WelcomePages/AddCloudPrintersView.qml:73 msgctxt "@label" msgid "Waiting for Cloud response" msgstr "" #: resources/qml/WelcomePages/AddCloudPrintersView.qml:83 msgctxt "@label" msgid "No printers found in your account?" msgstr "" #: resources/qml/WelcomePages/AddCloudPrintersView.qml:117 msgctxt "@label" msgid "The following printers in your account have been added in Cura:" msgstr "" #: resources/qml/WelcomePages/AddCloudPrintersView.qml:186 msgctxt "@button" msgid "Add printer manually" msgstr "" #: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "" #: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "" #: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "" #: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "" #: resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43 msgctxt "@label" msgid "There is no printer found over your network." msgstr "" #: resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162 msgctxt "@label" msgid "Refresh" msgstr "" #: resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173 msgctxt "@label" msgid "Add printer by IP" msgstr "" #: resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:205 msgctxt "@label" msgid "Troubleshooting" msgstr "" #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:70 msgctxt "@label" msgid "Add printer by IP address" msgstr "" #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:128 msgctxt "@text" msgid "Enter your printer's IP address." msgstr "" #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:150 msgctxt "@button" msgid "Add" msgstr "" #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:195 msgctxt "@label" msgid "Could not connect to device." msgstr "" #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:196 #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:201 msgctxt "@label" msgid "Can't connect to your UltiMaker printer?" msgstr "" #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:200 msgctxt "@label" msgid "The printer at this address has not responded yet." msgstr "" #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:231 msgctxt "@label" msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group." msgstr "" #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:312 msgctxt "@button" msgid "Connect" msgstr "" #: resources/qml/WelcomePages/AddThirdPartyPrinter.qml:29 msgctxt "@label" msgid "Add a networked printer" msgstr "" #: resources/qml/WelcomePages/AddThirdPartyPrinter.qml:78 msgctxt "@label" msgid "Add a non-networked printer" msgstr "" #: resources/qml/WelcomePages/AddThirdPartyPrinter.qml:102 msgctxt "@button" msgid "Add UltiMaker printer via Digital Factory" msgstr "" #: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinter.qml:29 msgctxt "@label" msgid "In order to start using Cura you will need to configure a printer." msgstr "" #: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinter.qml:36 msgctxt "@label" msgid "What printer would you like to setup?" msgstr "" #: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinter.qml:55 msgctxt "@button" msgid "UltiMaker printer" msgstr "" #: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinter.qml:64 msgctxt "@button" msgid "Non UltiMaker printer" msgstr "" #: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinter.qml:73 msgctxt "@button" msgid "Learn more about adding printers to Cura" msgstr "" #: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinterStack.qml:29 msgctxt "@label" msgid "Add printer" msgstr "Lisää tulostin" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:33 msgctxt "@label" msgid "New UltiMaker printers can be connected to Digital Factory and monitored remotely." msgstr "" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:70 msgctxt "@label" msgid "If you are trying to add a new UltiMaker printer to Cura" msgstr "" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:80 msgctxt "@info" msgid "Sign in into UltiMaker Digital Factory" msgstr "" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:81 msgctxt "@info" msgid "Follow the procedure to add a new printer" msgstr "" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:82 msgctxt "@info" msgid "Your new printer will automatically appear in Cura" msgstr "" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:100 msgctxt "@button" msgid "Learn more" msgstr "" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:121 msgctxt "@button" msgid "Add local printer" msgstr "" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:129 msgctxt "@button" msgid "Sign in to Digital Factory" msgstr "" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:133 msgctxt "@button" msgid "Waiting for new printers" msgstr "" #: resources/qml/WelcomePages/ChangelogContent.qml:24 msgctxt "@label" msgid "Release Notes" msgstr "" #: resources/qml/WelcomePages/CloudContent.qml:123 msgctxt "@text" msgid "Add material settings and plugins from the Marketplace" msgstr "" #: resources/qml/WelcomePages/CloudContent.qml:149 msgctxt "@text" msgid "Backup and sync your material settings and plugins" msgstr "" #: resources/qml/WelcomePages/CloudContent.qml:175 msgctxt "@text" msgid "Share ideas and get help from 48,000+ users in the UltiMaker Community" msgstr "" #: resources/qml/WelcomePages/CloudContent.qml:189 msgctxt "@button" msgid "Skip" msgstr "" #: resources/qml/WelcomePages/CloudContent.qml:201 msgctxt "@text" msgid "Create a free UltiMaker Account" msgstr "" #: resources/qml/WelcomePages/DropDownWidget.qml:93 msgctxt "@label" msgid "Empty" msgstr "" #: resources/qml/WelcomePages/UserAgreementContent.qml:23 msgctxt "@label" msgid "User Agreement" msgstr "" #: resources/qml/WelcomePages/UserAgreementContent.qml:67 msgctxt "@button" msgid "Decline and close" msgstr "" #: resources/qml/WelcomePages/WhatsNewContent.qml:28 msgctxt "@label" msgid "What's New" msgstr "" #: resources/qml/Widgets/ComboBox.qml:18 msgctxt "@label" msgid "No items to select from" msgstr ""