# msgid "" msgstr "" "Project-Id-Version: Uranium json setting files\n" "Report-Msgid-Bugs-To: plugins@ultimaker.com\n" "POT-Creation-Date: 2023-04-28 10:03+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: fdmprinter.def.json msgctxt "machine_settings label" msgid "Machine" msgstr "" #: fdmprinter.def.json msgctxt "machine_settings description" msgid "Machine specific settings" msgstr "" #: fdmprinter.def.json msgctxt "machine_name label" msgid "Machine Type" msgstr "" #: fdmprinter.def.json msgctxt "machine_name description" msgid "The name of your 3D printer model." msgstr "" #: fdmprinter.def.json msgctxt "machine_show_variants label" msgid "Show Machine Variants" msgstr "" #: fdmprinter.def.json msgctxt "machine_show_variants description" msgid "Whether to show the different variants of this machine, which are described in separate json files." msgstr "" #: fdmprinter.def.json msgctxt "machine_start_gcode label" msgid "Start G-code" msgstr "" #: fdmprinter.def.json msgctxt "machine_start_gcode description" msgid "G-code commands to be executed at the very start - separated by \n." msgstr "" #: fdmprinter.def.json msgctxt "machine_end_gcode label" msgid "End G-code" msgstr "" #: fdmprinter.def.json msgctxt "machine_end_gcode description" msgid "G-code commands to be executed at the very end - separated by \n." msgstr "" #: fdmprinter.def.json msgctxt "material_guid label" msgid "Material GUID" msgstr "" #: fdmprinter.def.json msgctxt "material_guid description" msgid "GUID of the material. This is set automatically." msgstr "" #: fdmprinter.def.json msgctxt "material_diameter label" msgid "Diameter" msgstr "" #: fdmprinter.def.json msgctxt "material_diameter description" msgid "Adjusts the diameter of the filament used. Match this value with the diameter of the used filament." msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temp_wait label" msgid "Wait for Build Plate Heatup" msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temp_wait description" msgid "Whether to insert a command to wait until the build plate temperature is reached at the start." msgstr "" #: fdmprinter.def.json msgctxt "material_print_temp_wait label" msgid "Wait for Nozzle Heatup" msgstr "" #: fdmprinter.def.json msgctxt "material_print_temp_wait description" msgid "Whether to wait until the nozzle temperature is reached at the start." msgstr "" #: fdmprinter.def.json msgctxt "material_print_temp_prepend label" msgid "Include Material Temperatures" msgstr "" #: fdmprinter.def.json msgctxt "material_print_temp_prepend description" msgid "Whether to include nozzle temperature commands at the start of the gcode. When the start_gcode already contains nozzle temperature commands Cura frontend will automatically disable this setting." msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temp_prepend label" msgid "Include Build Plate Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temp_prepend description" msgid "Whether to include build plate temperature commands at the start of the gcode. When the start_gcode already contains build plate temperature commands Cura frontend will automatically disable this setting." msgstr "" #: fdmprinter.def.json msgctxt "machine_width label" msgid "Machine Width" msgstr "" #: fdmprinter.def.json msgctxt "machine_width description" msgid "The width (X-direction) of the printable area." msgstr "" #: fdmprinter.def.json msgctxt "machine_depth label" msgid "Machine Depth" msgstr "" #: fdmprinter.def.json msgctxt "machine_depth description" msgid "The depth (Y-direction) of the printable area." msgstr "" #: fdmprinter.def.json msgctxt "machine_height label" msgid "Machine Height" msgstr "" #: fdmprinter.def.json msgctxt "machine_height description" msgid "The height (Z-direction) of the printable area." msgstr "" #: fdmprinter.def.json msgctxt "machine_shape label" msgid "Build Plate Shape" msgstr "" #: fdmprinter.def.json msgctxt "machine_shape description" msgid "The shape of the build plate without taking unprintable areas into account." msgstr "" #: fdmprinter.def.json msgctxt "machine_shape option rectangular" msgid "Rectangular" msgstr "" #: fdmprinter.def.json msgctxt "machine_shape option elliptic" msgid "Elliptic" msgstr "" #: fdmprinter.def.json msgctxt "machine_buildplate_type label" msgid "Build Plate Material" msgstr "" #: fdmprinter.def.json msgctxt "machine_buildplate_type description" msgid "The material of the build plate installed on the printer." msgstr "" #: fdmprinter.def.json msgctxt "machine_buildplate_type option glass" msgid "Glass" msgstr "" #: fdmprinter.def.json msgctxt "machine_buildplate_type option aluminum" msgid "Aluminum" msgstr "" #: fdmprinter.def.json msgctxt "machine_heated_bed label" msgid "Has Heated Build Plate" msgstr "" #: fdmprinter.def.json msgctxt "machine_heated_bed description" msgid "Whether the machine has a heated build plate present." msgstr "" #: fdmprinter.def.json msgctxt "machine_heated_build_volume label" msgid "Has Build Volume Temperature Stabilization" msgstr "" #: fdmprinter.def.json msgctxt "machine_heated_build_volume description" msgid "Whether the machine is able to stabilize the build volume temperature." msgstr "" #: fdmprinter.def.json msgctxt "machine_always_write_active_tool label" msgid "Always Write Active Tool" msgstr "" #: fdmprinter.def.json msgctxt "machine_always_write_active_tool description" msgid "Write active tool after sending temp commands to inactive tool. Required for Dual Extruder printing with Smoothie or other firmware with modal tool commands." msgstr "" #: fdmprinter.def.json msgctxt "machine_center_is_zero label" msgid "Is Center Origin" msgstr "" #: fdmprinter.def.json msgctxt "machine_center_is_zero description" msgid "Whether the X/Y coordinates of the zero position of the printer is at the center of the printable area." msgstr "" #: fdmprinter.def.json msgctxt "machine_extruder_count label" msgid "Number of Extruders" msgstr "" #: fdmprinter.def.json msgctxt "machine_extruder_count description" msgid "Number of extruder trains. An extruder train is the combination of a feeder, bowden tube, and nozzle." msgstr "" #: fdmprinter.def.json msgctxt "extruders_enabled_count label" msgid "Number of Extruders That Are Enabled" msgstr "" #: fdmprinter.def.json msgctxt "extruders_enabled_count description" msgid "Number of extruder trains that are enabled; automatically set in software" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_tip_outer_diameter label" msgid "Outer Nozzle Diameter" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_tip_outer_diameter description" msgid "The outer diameter of the tip of the nozzle." msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_head_distance label" msgid "Nozzle Length" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_head_distance description" msgid "The height difference between the tip of the nozzle and the lowest part of the print head." msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_expansion_angle label" msgid "Nozzle Angle" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_expansion_angle description" msgid "The angle between the horizontal plane and the conical part right above the tip of the nozzle." msgstr "" #: fdmprinter.def.json msgctxt "machine_heat_zone_length label" msgid "Heat Zone Length" msgstr "" #: fdmprinter.def.json msgctxt "machine_heat_zone_length description" msgid "The distance from the tip of the nozzle in which heat from the nozzle is transferred to the filament." msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_temp_enabled label" msgid "Enable Nozzle Temperature Control" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_temp_enabled description" msgid "Whether to control temperature from Cura. Turn this off to control nozzle temperature from outside of Cura." msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_heat_up_speed label" msgid "Heat Up Speed" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_heat_up_speed description" msgid "The speed (°C/s) by which the nozzle heats up averaged over the window of normal printing temperatures and the standby temperature." msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_cool_down_speed label" msgid "Cool Down Speed" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_cool_down_speed description" msgid "The speed (°C/s) by which the nozzle cools down averaged over the window of normal printing temperatures and the standby temperature." msgstr "" #: fdmprinter.def.json msgctxt "machine_min_cool_heat_time_window label" msgid "Minimal Time Standby Temperature" msgstr "" #: fdmprinter.def.json msgctxt "machine_min_cool_heat_time_window description" msgid "The minimal time an extruder has to be inactive before the nozzle is cooled. Only when an extruder is not used for longer than this time will it be allowed to cool down to the standby temperature." msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor label" msgid "G-code Flavor" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor description" msgid "The type of g-code to be generated." msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option RepRap (Marlin/Sprinter)" msgid "Marlin" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option RepRap (Volumetric)" msgid "Marlin (Volumetric)" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option RepRap (RepRap)" msgid "RepRap" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option UltiGCode" msgid "Ultimaker 2" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option Griffin" msgid "Griffin" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option Makerbot" msgid "Makerbot" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option BFB" msgid "Bits from Bytes" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option MACH3" msgid "Mach3" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option Repetier" msgid "Repetier" msgstr "" #: fdmprinter.def.json msgctxt "machine_firmware_retract label" msgid "Firmware Retraction" msgstr "" #: fdmprinter.def.json msgctxt "machine_firmware_retract description" msgid "Whether to use firmware retract commands (G10/G11) instead of using the E property in G1 commands to retract the material." msgstr "" #: fdmprinter.def.json msgctxt "machine_extruders_share_heater label" msgid "Extruders Share Heater" msgstr "" #: fdmprinter.def.json msgctxt "machine_extruders_share_heater description" msgid "Whether the extruders share a single heater rather than each extruder having its own heater." msgstr "" #: fdmprinter.def.json msgctxt "machine_extruders_share_nozzle label" msgid "Extruders Share Nozzle" msgstr "" #: fdmprinter.def.json msgctxt "machine_extruders_share_nozzle description" msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter." msgstr "" #: fdmprinter.def.json msgctxt "machine_extruders_shared_nozzle_initial_retraction label" msgid "Shared Nozzle Initial Retraction" msgstr "" #: fdmprinter.def.json msgctxt "machine_extruders_shared_nozzle_initial_retraction description" msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts." msgstr "" #: fdmprinter.def.json msgctxt "machine_disallowed_areas label" msgid "Disallowed Areas" msgstr "" #: fdmprinter.def.json msgctxt "machine_disallowed_areas description" msgid "A list of polygons with areas the print head is not allowed to enter." msgstr "" #: fdmprinter.def.json msgctxt "nozzle_disallowed_areas label" msgid "Nozzle Disallowed Areas" msgstr "" #: fdmprinter.def.json msgctxt "nozzle_disallowed_areas description" msgid "A list of polygons with areas the nozzle is not allowed to enter." msgstr "" #: fdmprinter.def.json msgctxt "machine_head_with_fans_polygon label" msgid "Machine Head & Fan Polygon" msgstr "" #: fdmprinter.def.json msgctxt "machine_head_with_fans_polygon description" msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates." msgstr "" #: fdmprinter.def.json msgctxt "gantry_height label" msgid "Gantry Height" msgstr "" #: fdmprinter.def.json msgctxt "gantry_height description" msgid "The height difference between the tip of the nozzle and the gantry system (X and Y axes)." msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_id label" msgid "Nozzle ID" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_id description" msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"." msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_size label" msgid "Nozzle Diameter" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_size description" msgid "The inner diameter of the nozzle. Change this setting when using a non-standard nozzle size." msgstr "" #: fdmprinter.def.json msgctxt "machine_use_extruder_offset_to_offset_coords label" msgid "Offset with Extruder" msgstr "" #: fdmprinter.def.json msgctxt "machine_use_extruder_offset_to_offset_coords description" msgid "Apply the extruder offset to the coordinate system. Affects all extruders." msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_z label" msgid "Extruder Prime Z Position" msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_z description" msgid "The Z coordinate of the position where the nozzle primes at the start of printing." msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_abs label" msgid "Absolute Extruder Prime Position" msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_abs description" msgid "Make the extruder prime position absolute rather than relative to the last-known location of the head." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_x label" msgid "Maximum Speed X" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_x description" msgid "The maximum speed for the motor of the X-direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_y label" msgid "Maximum Speed Y" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_y description" msgid "The maximum speed for the motor of the Y-direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_z label" msgid "Maximum Speed Z" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_z description" msgid "The maximum speed for the motor of the Z-direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_e label" msgid "Maximum Speed E" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_e description" msgid "The maximum speed of the filament." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_x label" msgid "Maximum Acceleration X" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_x description" msgid "Maximum acceleration for the motor of the X-direction" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_y label" msgid "Maximum Acceleration Y" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_y description" msgid "Maximum acceleration for the motor of the Y-direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_z label" msgid "Maximum Acceleration Z" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_z description" msgid "Maximum acceleration for the motor of the Z-direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_e label" msgid "Maximum Filament Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_e description" msgid "Maximum acceleration for the motor of the filament." msgstr "" #: fdmprinter.def.json msgctxt "machine_acceleration label" msgid "Default Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "machine_acceleration description" msgid "The default acceleration of print head movement." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_jerk_xy label" msgid "Default X-Y Jerk" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_jerk_xy description" msgid "Default jerk for movement in the horizontal plane." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_jerk_z label" msgid "Default Z Jerk" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_jerk_z description" msgid "Default jerk for the motor of the Z-direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_jerk_e label" msgid "Default Filament Jerk" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_jerk_e description" msgid "Default jerk for the motor of the filament." msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_x label" msgid "Steps per Millimeter (X)" msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_x description" msgid "How many steps of the stepper motor will result in one millimeter of movement in the X direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_y label" msgid "Steps per Millimeter (Y)" msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_y description" msgid "How many steps of the stepper motor will result in one millimeter of movement in the Y direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_z label" msgid "Steps per Millimeter (Z)" msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_z description" msgid "How many steps of the stepper motor will result in one millimeter of movement in the Z direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_e label" msgid "Steps per Millimeter (E)" msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_e description" msgid "How many steps of the stepper motors will result in moving the feeder wheel by one millimeter around its circumference." msgstr "" #: fdmprinter.def.json msgctxt "machine_endstop_positive_direction_x label" msgid "X Endstop in Positive Direction" msgstr "" #: fdmprinter.def.json msgctxt "machine_endstop_positive_direction_x description" msgid "Whether the endstop of the X axis is in the positive direction (high X coordinate) or negative (low X coordinate)." msgstr "" #: fdmprinter.def.json msgctxt "machine_endstop_positive_direction_y label" msgid "Y Endstop in Positive Direction" msgstr "" #: fdmprinter.def.json msgctxt "machine_endstop_positive_direction_y description" msgid "Whether the endstop of the Y axis is in the positive direction (high Y coordinate) or negative (low Y coordinate)." msgstr "" #: fdmprinter.def.json msgctxt "machine_endstop_positive_direction_z label" msgid "Z Endstop in Positive Direction" msgstr "" #: fdmprinter.def.json msgctxt "machine_endstop_positive_direction_z description" msgid "Whether the endstop of the Z axis is in the positive direction (high Z coordinate) or negative (low Z coordinate)." msgstr "" #: fdmprinter.def.json msgctxt "machine_minimum_feedrate label" msgid "Minimum Feedrate" msgstr "" #: fdmprinter.def.json msgctxt "machine_minimum_feedrate description" msgid "The minimal movement speed of the print head." msgstr "" #: fdmprinter.def.json msgctxt "machine_feeder_wheel_diameter label" msgid "Feeder Wheel Diameter" msgstr "" #: fdmprinter.def.json msgctxt "machine_feeder_wheel_diameter description" msgid "The diameter of the wheel that drives the material in the feeder." msgstr "" #: fdmprinter.def.json msgctxt "machine_scale_fan_speed_zero_to_one label" msgid "Scale Fan Speed To 0-1" msgstr "" #: fdmprinter.def.json msgctxt "machine_scale_fan_speed_zero_to_one description" msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256." msgstr "" #: fdmprinter.def.json msgctxt "resolution label" msgid "Quality" msgstr "" #: fdmprinter.def.json msgctxt "resolution description" msgid "All settings that influence the resolution of the print. These settings have a large impact on the quality (and print time)" msgstr "" #: fdmprinter.def.json msgctxt "layer_height label" msgid "Layer Height" msgstr "" #: fdmprinter.def.json msgctxt "layer_height description" msgid "The height of each layer in mm. Higher values produce faster prints in lower resolution, lower values produce slower prints in higher resolution." msgstr "" #: fdmprinter.def.json msgctxt "layer_height_0 label" msgid "Initial Layer Height" msgstr "" #: fdmprinter.def.json msgctxt "layer_height_0 description" msgid "The height of the initial layer in mm. A thicker initial layer makes adhesion to the build plate easier." msgstr "" #: fdmprinter.def.json msgctxt "line_width label" msgid "Line Width" msgstr "" #: fdmprinter.def.json msgctxt "line_width description" msgid "Width of a single line. Generally, the width of each line should correspond to the width of the nozzle. However, slightly reducing this value could produce better prints." msgstr "" #: fdmprinter.def.json msgctxt "wall_line_width label" msgid "Wall Line Width" msgstr "" #: fdmprinter.def.json msgctxt "wall_line_width description" msgid "Width of a single wall line." msgstr "" #: fdmprinter.def.json msgctxt "wall_line_width_0 label" msgid "Outer Wall Line Width" msgstr "" #: fdmprinter.def.json msgctxt "wall_line_width_0 description" msgid "Width of the outermost wall line. By lowering this value, higher levels of detail can be printed." msgstr "" #: fdmprinter.def.json msgctxt "wall_line_width_x label" msgid "Inner Wall(s) Line Width" msgstr "" #: fdmprinter.def.json msgctxt "wall_line_width_x description" msgid "Width of a single wall line for all wall lines except the outermost one." msgstr "" #: fdmprinter.def.json msgctxt "skin_line_width label" msgid "Top/Bottom Line Width" msgstr "" #: fdmprinter.def.json msgctxt "skin_line_width description" msgid "Width of a single top/bottom line." msgstr "" #: fdmprinter.def.json msgctxt "infill_line_width label" msgid "Infill Line Width" msgstr "" #: fdmprinter.def.json msgctxt "infill_line_width description" msgid "Width of a single infill line." msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_line_width label" msgid "Skirt/Brim Line Width" msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_line_width description" msgid "Width of a single skirt or brim line." msgstr "" #: fdmprinter.def.json msgctxt "support_line_width label" msgid "Support Line Width" msgstr "" #: fdmprinter.def.json msgctxt "support_line_width description" msgid "Width of a single support structure line." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_line_width label" msgid "Support Interface Line Width" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_line_width description" msgid "Width of a single line of support roof or floor." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_line_width label" msgid "Support Roof Line Width" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_line_width description" msgid "Width of a single support roof line." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_line_width label" msgid "Support Floor Line Width" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_line_width description" msgid "Width of a single support floor line." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_line_width label" msgid "Prime Tower Line Width" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_line_width description" msgid "Width of a single prime tower line." msgstr "" #: fdmprinter.def.json msgctxt "initial_layer_line_width_factor label" msgid "Initial Layer Line Width" msgstr "" #: fdmprinter.def.json msgctxt "initial_layer_line_width_factor description" msgid "Multiplier of the line width on the first layer. Increasing this could improve bed adhesion." msgstr "" #: fdmprinter.def.json msgctxt "shell label" msgid "Walls" msgstr "" #: fdmprinter.def.json msgctxt "shell description" msgid "Shell" msgstr "" #: fdmprinter.def.json msgctxt "wall_extruder_nr label" msgid "Wall Extruder" msgstr "" #: fdmprinter.def.json msgctxt "wall_extruder_nr description" msgid "The extruder train used for printing the walls. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "wall_0_extruder_nr label" msgid "Outer Wall Extruder" msgstr "" #: fdmprinter.def.json msgctxt "wall_0_extruder_nr description" msgid "The extruder train used for printing the outer wall. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "wall_x_extruder_nr label" msgid "Inner Wall Extruder" msgstr "" #: fdmprinter.def.json msgctxt "wall_x_extruder_nr description" msgid "The extruder train used for printing the inner walls. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "wall_thickness label" msgid "Wall Thickness" msgstr "" #: fdmprinter.def.json msgctxt "wall_thickness description" msgid "The thickness of the walls in the horizontal direction. This value divided by the wall line width defines the number of walls." msgstr "" #: fdmprinter.def.json msgctxt "wall_line_count label" msgid "Wall Line Count" msgstr "" #: fdmprinter.def.json msgctxt "wall_line_count description" msgid "The number of walls. When calculated by the wall thickness, this value is rounded to a whole number." msgstr "" #: fdmprinter.def.json msgctxt "wall_transition_length label" msgid "Wall Transition Length" msgstr "" #: fdmprinter.def.json msgctxt "wall_transition_length description" msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines." msgstr "" #: fdmprinter.def.json msgctxt "wall_distribution_count label" msgid "Wall Distribution Count" msgstr "" #: fdmprinter.def.json msgctxt "wall_distribution_count description" msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width." msgstr "" #: fdmprinter.def.json msgctxt "wall_transition_angle label" msgid "Wall Transitioning Threshold Angle" msgstr "" #: fdmprinter.def.json msgctxt "wall_transition_angle description" msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude." msgstr "" #: fdmprinter.def.json msgctxt "wall_transition_filter_distance label" msgid "Wall Transitioning Filter Distance" msgstr "" #: fdmprinter.def.json msgctxt "wall_transition_filter_distance description" msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance." msgstr "" #: fdmprinter.def.json msgctxt "wall_transition_filter_deviation label" msgid "Wall Transitioning Filter Margin" msgstr "" #: fdmprinter.def.json msgctxt "wall_transition_filter_deviation description" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems." msgstr "" #: fdmprinter.def.json msgctxt "wall_0_wipe_dist label" msgid "Outer Wall Wipe Distance" msgstr "" #: fdmprinter.def.json msgctxt "wall_0_wipe_dist description" msgid "Distance of a travel move inserted after the outer wall, to hide the Z seam better." msgstr "" #: fdmprinter.def.json msgctxt "wall_0_inset label" msgid "Outer Wall Inset" msgstr "" #: fdmprinter.def.json msgctxt "wall_0_inset description" msgid "Inset applied to the path of the outer wall. If the outer wall is smaller than the nozzle, and printed after the inner walls, use this offset to get the hole in the nozzle to overlap with the inner walls instead of the outside of the model." msgstr "" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" msgstr "" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order description" msgid "Optimize the order in which walls are printed so as to reduce the number of retractions and the distance travelled. Most parts will benefit from this being enabled but some may actually take longer so please compare the print time estimates with and without optimization. First layer is not optimized when choosing brim as build plate adhesion type." msgstr "" #: fdmprinter.def.json msgctxt "inset_direction label" msgid "Wall Ordering" msgstr "" #: fdmprinter.def.json msgctxt "inset_direction description" msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed. When there is an uneven amount of total innner walls, the 'center last line' is always printed last." msgstr "" #: fdmprinter.def.json msgctxt "inset_direction option inside_out" msgid "Inside To Outside" msgstr "" #: fdmprinter.def.json msgctxt "inset_direction option outside_in" msgid "Outside To Inside" msgstr "" #: fdmprinter.def.json msgctxt "alternate_extra_perimeter label" msgid "Alternate Extra Wall" msgstr "" #: fdmprinter.def.json msgctxt "alternate_extra_perimeter description" msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints." msgstr "" #: fdmprinter.def.json msgctxt "min_wall_line_width label" msgid "Minimum Wall Line Width" msgstr "" #: fdmprinter.def.json msgctxt "min_wall_line_width description" msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width." msgstr "" #: fdmprinter.def.json msgctxt "min_even_wall_line_width label" msgid "Minimum Even Wall Line Width" msgstr "" #: fdmprinter.def.json msgctxt "min_even_wall_line_width description" msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width." msgstr "" #: fdmprinter.def.json msgctxt "min_odd_wall_line_width label" msgid "Minimum Odd Wall Line Width" msgstr "" #: fdmprinter.def.json msgctxt "min_odd_wall_line_width description" msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width." msgstr "" #: fdmprinter.def.json msgctxt "fill_outline_gaps label" msgid "Print Thin Walls" msgstr "" #: fdmprinter.def.json msgctxt "fill_outline_gaps description" msgid "Print pieces of the model which are horizontally thinner than the nozzle size." msgstr "" #: fdmprinter.def.json msgctxt "min_feature_size label" msgid "Minimum Feature Size" msgstr "" #: fdmprinter.def.json msgctxt "min_feature_size description" msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width." msgstr "" #: fdmprinter.def.json msgctxt "min_bead_width label" msgid "Minimum Thin Wall Line Width" msgstr "" #: fdmprinter.def.json msgctxt "min_bead_width description" msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself." msgstr "" #: fdmprinter.def.json msgctxt "xy_offset label" msgid "Horizontal Expansion" msgstr "" #: fdmprinter.def.json msgctxt "xy_offset description" msgid "Amount of offset applied to all polygons in each layer. Positive values can compensate for too big holes; negative values can compensate for too small holes." msgstr "" #: fdmprinter.def.json msgctxt "xy_offset_layer_0 label" msgid "Initial Layer Horizontal Expansion" msgstr "" #: fdmprinter.def.json msgctxt "xy_offset_layer_0 description" msgid "Amount of offset applied to all polygons in the first layer. A negative value can compensate for squishing of the first layer known as \"elephant's foot\"." msgstr "" #: fdmprinter.def.json msgctxt "hole_xy_offset label" msgid "Hole Horizontal Expansion" msgstr "" #: fdmprinter.def.json msgctxt "hole_xy_offset description" msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes." msgstr "" #: fdmprinter.def.json msgctxt "hole_xy_offset_max_diameter label" msgid "Hole Horizontal Expansion Max Diameter" msgstr "" #: fdmprinter.def.json msgctxt "hole_xy_offset_max_diameter description" msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded." msgstr "" #: fdmprinter.def.json msgctxt "z_seam_type label" msgid "Z Seam Alignment" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_type description" msgid "Starting point of each path in a layer. When paths in consecutive layers start at the same point a vertical seam may show on the print. When aligning these near a user specified location, the seam is easiest to remove. When placed randomly the inaccuracies at the paths' start will be less noticeable. When taking the shortest path the print will be quicker." msgstr "" #: fdmprinter.def.json msgctxt "z_seam_type option back" msgid "User Specified" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_type option shortest" msgid "Shortest" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_type option random" msgid "Random" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_type option sharpest_corner" msgid "Sharpest Corner" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position label" msgid "Z Seam Position" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position description" msgid "The position near where to start printing each part in a layer." msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option backleft" msgid "Back Left" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option back" msgid "Back" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option backright" msgid "Back Right" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option right" msgid "Right" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option frontright" msgid "Front Right" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option front" msgid "Front" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option frontleft" msgid "Front Left" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option left" msgid "Left" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_x label" msgid "Z Seam X" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_x description" msgid "The X coordinate of the position near where to start printing each part in a layer." msgstr "" #: fdmprinter.def.json msgctxt "z_seam_y label" msgid "Z Seam Y" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_y description" msgid "The Y coordinate of the position near where to start printing each part in a layer." msgstr "" #: fdmprinter.def.json msgctxt "z_seam_corner label" msgid "Seam Corner Preference" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_corner description" msgid "Control whether corners on the model outline influence the position of the seam. None means that corners have no influence on the seam position. Hide Seam makes the seam more likely to occur on an inside corner. Expose Seam makes the seam more likely to occur on an outside corner. Hide or Expose Seam makes the seam more likely to occur at an inside or outside corner. Smart Hiding allows both inside and outside corners, but chooses inside corners more frequently, if appropriate." msgstr "" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_none" msgid "None" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_inner" msgid "Hide Seam" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_outer" msgid "Expose Seam" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_any" msgid "Hide or Expose Seam" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_weighted" msgid "Smart Hiding" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_relative label" msgid "Z Seam Relative" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_relative description" msgid "When enabled, the z seam coordinates are relative to each part's centre. When disabled, the coordinates define an absolute position on the build plate." msgstr "" #: fdmprinter.def.json msgctxt "top_bottom label" msgid "Top/Bottom" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom description" msgid "Top/Bottom" msgstr "" #: fdmprinter.def.json msgctxt "roofing_extruder_nr label" msgid "Top Surface Skin Extruder" msgstr "" #: fdmprinter.def.json msgctxt "roofing_extruder_nr description" msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "roofing_layer_count label" msgid "Top Surface Skin Layers" msgstr "" #: fdmprinter.def.json msgctxt "roofing_layer_count description" msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces." msgstr "" #: fdmprinter.def.json msgctxt "roofing_line_width label" msgid "Top Surface Skin Line Width" msgstr "" #: fdmprinter.def.json msgctxt "roofing_line_width description" msgid "Width of a single line of the areas at the top of the print." msgstr "" #: fdmprinter.def.json msgctxt "roofing_pattern label" msgid "Top Surface Skin Pattern" msgstr "" #: fdmprinter.def.json msgctxt "roofing_pattern description" msgid "The pattern of the top most layers." msgstr "" #: fdmprinter.def.json msgctxt "roofing_pattern option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "roofing_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "roofing_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "roofing_monotonic label" msgid "Monotonic Top Surface Order" msgstr "" #: fdmprinter.def.json msgctxt "roofing_monotonic description" msgid "Print top surface lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent." msgstr "" #: fdmprinter.def.json msgctxt "roofing_angles label" msgid "Top Surface Skin Line Directions" msgstr "" #: fdmprinter.def.json msgctxt "roofing_angles description" msgid "A list of integer line directions to use when the top surface skin layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)." msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_extruder_nr label" msgid "Top/Bottom Extruder" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_extruder_nr description" msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_thickness label" msgid "Top/Bottom Thickness" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_thickness description" msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers." msgstr "" #: fdmprinter.def.json msgctxt "top_thickness label" msgid "Top Thickness" msgstr "" #: fdmprinter.def.json msgctxt "top_thickness description" msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers." msgstr "" #: fdmprinter.def.json msgctxt "top_layers label" msgid "Top Layers" msgstr "" #: fdmprinter.def.json msgctxt "top_layers description" msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number." msgstr "" #: fdmprinter.def.json msgctxt "bottom_thickness label" msgid "Bottom Thickness" msgstr "" #: fdmprinter.def.json msgctxt "bottom_thickness description" msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers." msgstr "" #: fdmprinter.def.json msgctxt "bottom_layers label" msgid "Bottom Layers" msgstr "" #: fdmprinter.def.json msgctxt "bottom_layers description" msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number." msgstr "" #: fdmprinter.def.json msgctxt "initial_bottom_layers label" msgid "Initial Bottom Layers" msgstr "" #: fdmprinter.def.json msgctxt "initial_bottom_layers description" msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number." msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern label" msgid "Top/Bottom Pattern" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern description" msgid "The pattern of the top/bottom layers." msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern_0 label" msgid "Bottom Pattern Initial Layer" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern_0 description" msgid "The pattern on the bottom of the print on the first layer." msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern_0 option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern_0 option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern_0 option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "connect_skin_polygons label" msgid "Connect Top/Bottom Polygons" msgstr "" #: fdmprinter.def.json msgctxt "connect_skin_polygons description" msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality." msgstr "" #: fdmprinter.def.json msgctxt "skin_monotonic label" msgid "Monotonic Top/Bottom Order" msgstr "" #: fdmprinter.def.json msgctxt "skin_monotonic description" msgid "Print top/bottom lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent." msgstr "" #: fdmprinter.def.json msgctxt "skin_angles label" msgid "Top/Bottom Line Directions" msgstr "" #: fdmprinter.def.json msgctxt "skin_angles description" msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)." msgstr "" #: fdmprinter.def.json msgctxt "small_skin_width label" msgid "Small Top/Bottom Width" msgstr "" #: fdmprinter.def.json msgctxt "small_skin_width description" msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions." msgstr "" #: fdmprinter.def.json msgctxt "skin_no_small_gaps_heuristic label" msgid "No Skin in Z Gaps" msgstr "" #: fdmprinter.def.json msgctxt "skin_no_small_gaps_heuristic description" msgid "When the model has small vertical gaps of only a few layers, there should normally be skin around those layers in the narrow space. Enable this setting to not generate skin if the vertical gap is very small. This improves printing time and slicing time, but technically leaves infill exposed to the air." msgstr "" #: fdmprinter.def.json msgctxt "skin_outline_count label" msgid "Extra Skin Wall Count" msgstr "" #: fdmprinter.def.json msgctxt "skin_outline_count description" msgid "Replaces the outermost part of the top/bottom pattern with a number of concentric lines. Using one or two lines improves roofs that start on infill material." msgstr "" #: fdmprinter.def.json msgctxt "ironing_enabled label" msgid "Enable Ironing" msgstr "" #: fdmprinter.def.json msgctxt "ironing_enabled description" msgid "Go over the top surface one additional time, but this time extruding very little material. This is meant to melt the plastic on top further, creating a smoother surface. The pressure in the nozzle chamber is kept high so that the creases in the surface are filled with material." msgstr "" #: fdmprinter.def.json msgctxt "ironing_only_highest_layer label" msgid "Iron Only Highest Layer" msgstr "" #: fdmprinter.def.json msgctxt "ironing_only_highest_layer description" msgid "Only perform ironing on the very last layer of the mesh. This saves time if the lower layers don't need a smooth surface finish." msgstr "" #: fdmprinter.def.json msgctxt "ironing_pattern label" msgid "Ironing Pattern" msgstr "" #: fdmprinter.def.json msgctxt "ironing_pattern description" msgid "The pattern to use for ironing top surfaces." msgstr "" #: fdmprinter.def.json msgctxt "ironing_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "ironing_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "ironing_monotonic label" msgid "Monotonic Ironing Order" msgstr "" #: fdmprinter.def.json msgctxt "ironing_monotonic description" msgid "Print ironing lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent." msgstr "" #: fdmprinter.def.json msgctxt "ironing_line_spacing label" msgid "Ironing Line Spacing" msgstr "" #: fdmprinter.def.json msgctxt "ironing_line_spacing description" msgid "The distance between the lines of ironing." msgstr "" #: fdmprinter.def.json msgctxt "ironing_flow label" msgid "Ironing Flow" msgstr "" #: fdmprinter.def.json msgctxt "ironing_flow description" msgid "The amount of material, relative to a normal skin line, to extrude during ironing. Keeping the nozzle filled helps filling some of the crevices of the top surface, but too much results in overextrusion and blips on the side of the surface." msgstr "" #: fdmprinter.def.json msgctxt "ironing_inset label" msgid "Ironing Inset" msgstr "" #: fdmprinter.def.json msgctxt "ironing_inset description" msgid "A distance to keep from the edges of the model. Ironing all the way to the edge of the mesh may result in a jagged edge on your print." msgstr "" #: fdmprinter.def.json msgctxt "speed_ironing label" msgid "Ironing Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_ironing description" msgid "The speed at which to pass over the top surface." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_ironing label" msgid "Ironing Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_ironing description" msgid "The acceleration with which ironing is performed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_ironing label" msgid "Ironing Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_ironing description" msgid "The maximum instantaneous velocity change while performing ironing." msgstr "" #: fdmprinter.def.json msgctxt "skin_overlap label" msgid "Skin Overlap Percentage" msgstr "" #: fdmprinter.def.json msgctxt "skin_overlap description" msgid "Adjust the amount of overlap between the walls and (the endpoints of) the skin-centerlines, as a percentage of the line widths of the skin lines and the innermost wall. A slight overlap allows the walls to connect firmly to the skin. Note that, given an equal skin and wall line-width, any percentage over 50% may already cause any skin to go past the wall, because at that point the position of the nozzle of the skin-extruder may already reach past the middle of the wall." msgstr "" #: fdmprinter.def.json msgctxt "skin_overlap_mm label" msgid "Skin Overlap" msgstr "" #: fdmprinter.def.json msgctxt "skin_overlap_mm description" msgid "Adjust the amount of overlap between the walls and (the endpoints of) the skin-centerlines. A slight overlap allows the walls to connect firmly to the skin. Note that, given an equal skin and wall line-width, any value over half the width of the wall may already cause any skin to go past the wall, because at that point the position of the nozzle of the skin-extruder may already reach past the middle of the wall." msgstr "" #: fdmprinter.def.json msgctxt "skin_preshrink label" msgid "Skin Removal Width" msgstr "" #: fdmprinter.def.json msgctxt "skin_preshrink description" msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model." msgstr "" #: fdmprinter.def.json msgctxt "top_skin_preshrink label" msgid "Top Skin Removal Width" msgstr "" #: fdmprinter.def.json msgctxt "top_skin_preshrink description" msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model." msgstr "" #: fdmprinter.def.json msgctxt "bottom_skin_preshrink label" msgid "Bottom Skin Removal Width" msgstr "" #: fdmprinter.def.json msgctxt "bottom_skin_preshrink description" msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model." msgstr "" #: fdmprinter.def.json msgctxt "expand_skins_expand_distance label" msgid "Skin Expand Distance" msgstr "" #: fdmprinter.def.json msgctxt "expand_skins_expand_distance description" msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used." msgstr "" #: fdmprinter.def.json msgctxt "top_skin_expand_distance label" msgid "Top Skin Expand Distance" msgstr "" #: fdmprinter.def.json msgctxt "top_skin_expand_distance description" msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used." msgstr "" #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance label" msgid "Bottom Skin Expand Distance" msgstr "" #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance description" msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used." msgstr "" #: fdmprinter.def.json msgctxt "max_skin_angle_for_expansion label" msgid "Maximum Skin Angle for Expansion" msgstr "" #: fdmprinter.def.json msgctxt "max_skin_angle_for_expansion description" msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded." msgstr "" #: fdmprinter.def.json msgctxt "min_skin_width_for_expansion label" msgid "Minimum Skin Width for Expansion" msgstr "" #: fdmprinter.def.json msgctxt "min_skin_width_for_expansion description" msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical." msgstr "" #: fdmprinter.def.json msgctxt "infill label" msgid "Infill" msgstr "" #: fdmprinter.def.json msgctxt "infill description" msgid "Infill" msgstr "" #: fdmprinter.def.json msgctxt "infill_extruder_nr label" msgid "Infill Extruder" msgstr "" #: fdmprinter.def.json msgctxt "infill_extruder_nr description" msgid "The extruder train used for printing infill. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "infill_sparse_density label" msgid "Infill Density" msgstr "" #: fdmprinter.def.json msgctxt "infill_sparse_density description" msgid "Adjusts the density of infill of the print." msgstr "" #: fdmprinter.def.json msgctxt "infill_line_distance label" msgid "Infill Line Distance" msgstr "" #: fdmprinter.def.json msgctxt "infill_line_distance description" msgid "Distance between the printed infill lines. This setting is calculated by the infill density and the infill line width." msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern label" msgid "Infill Pattern" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern description" msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric patterns are fully printed every layer. Gyroid, cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction. Lightning infill tries to minimize the infill, by only supporting the ceiling of the object." msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option grid" msgid "Grid" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option triangles" msgid "Triangles" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option trihexagon" msgid "Tri-Hexagon" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option cubic" msgid "Cubic" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option cubicsubdiv" msgid "Cubic Subdivision" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option tetrahedral" msgid "Octet" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option quarter_cubic" msgid "Quarter Cubic" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option cross" msgid "Cross" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option cross_3d" msgid "Cross 3D" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option gyroid" msgid "Gyroid" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option lightning" msgid "Lightning" msgstr "" #: fdmprinter.def.json msgctxt "zig_zaggify_infill label" msgid "Connect Infill Lines" msgstr "" #: fdmprinter.def.json msgctxt "zig_zaggify_infill description" msgid "Connect the ends where the infill pattern meets the inner wall using a line which follows the shape of the inner wall. Enabling this setting can make the infill adhere to the walls better and reduce the effects of infill on the quality of vertical surfaces. Disabling this setting reduces the amount of material used." msgstr "" #: fdmprinter.def.json msgctxt "connect_infill_polygons label" msgid "Connect Infill Polygons" msgstr "" #: fdmprinter.def.json msgctxt "connect_infill_polygons description" msgid "Connect infill paths where they run next to each other. For infill patterns which consist of several closed polygons, enabling this setting greatly reduces the travel time." msgstr "" #: fdmprinter.def.json msgctxt "infill_angles label" msgid "Infill Line Directions" msgstr "" #: fdmprinter.def.json msgctxt "infill_angles description" msgid "A list of integer line directions to use. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees for the lines and zig zag patterns and 45 degrees for all other patterns)." msgstr "" #: fdmprinter.def.json msgctxt "infill_offset_x label" msgid "Infill X Offset" msgstr "" #: fdmprinter.def.json msgctxt "infill_offset_x description" msgid "The infill pattern is moved this distance along the X axis." msgstr "" #: fdmprinter.def.json msgctxt "infill_offset_y label" msgid "Infill Y Offset" msgstr "" #: fdmprinter.def.json msgctxt "infill_offset_y description" msgid "The infill pattern is moved this distance along the Y axis." msgstr "" #: fdmprinter.def.json msgctxt "infill_randomize_start_location label" msgid "Randomize Infill Start" msgstr "" #: fdmprinter.def.json msgctxt "infill_randomize_start_location description" msgid "Randomize which infill line is printed first. This prevents one segment becoming the strongest, but it does so at the cost of an additional travel move." msgstr "" #: fdmprinter.def.json msgctxt "infill_multiplier label" msgid "Infill Line Multiplier" msgstr "" #: fdmprinter.def.json msgctxt "infill_multiplier description" msgid "Convert each infill line to this many lines. The extra lines do not cross over each other, but avoid each other. This makes the infill stiffer, but increases print time and material usage." msgstr "" #: fdmprinter.def.json msgctxt "infill_wall_line_count label" msgid "Extra Infill Wall Count" msgstr "" #: fdmprinter.def.json msgctxt "infill_wall_line_count description" msgid "Add extra walls around the infill area. Such walls can make top/bottom skin lines sag down less which means you need less top/bottom skin layers for the same quality at the cost of some extra material.\nThis feature can combine with the Connect Infill Polygons to connect all the infill into a single extrusion path without the need for travels or retractions if configured right." msgstr "" #: fdmprinter.def.json msgctxt "sub_div_rad_add label" msgid "Cubic Subdivision Shell" msgstr "" #: fdmprinter.def.json msgctxt "sub_div_rad_add description" msgid "An addition to the radius from the center of each cube to check for the boundary of the model, as to decide whether this cube should be subdivided. Larger values lead to a thicker shell of small cubes near the boundary of the model." msgstr "" #: fdmprinter.def.json msgctxt "infill_overlap label" msgid "Infill Overlap Percentage" msgstr "" #: fdmprinter.def.json msgctxt "infill_overlap description" msgid "The amount of overlap between the infill and the walls as a percentage of the infill line width. A slight overlap allows the walls to connect firmly to the infill." msgstr "" #: fdmprinter.def.json msgctxt "infill_overlap_mm label" msgid "Infill Overlap" msgstr "" #: fdmprinter.def.json msgctxt "infill_overlap_mm description" msgid "The amount of overlap between the infill and the walls. A slight overlap allows the walls to connect firmly to the infill." msgstr "" #: fdmprinter.def.json msgctxt "infill_wipe_dist label" msgid "Infill Wipe Distance" msgstr "" #: fdmprinter.def.json msgctxt "infill_wipe_dist description" msgid "Distance of a travel move inserted after every infill line, to make the infill stick to the walls better. This option is similar to infill overlap, but without extrusion and only on one end of the infill line." msgstr "" #: fdmprinter.def.json msgctxt "infill_sparse_thickness label" msgid "Infill Layer Thickness" msgstr "" #: fdmprinter.def.json msgctxt "infill_sparse_thickness description" msgid "The thickness per layer of infill material. This value should always be a multiple of the layer height and is otherwise rounded." msgstr "" #: fdmprinter.def.json msgctxt "gradual_infill_steps label" msgid "Gradual Infill Steps" msgstr "" #: fdmprinter.def.json msgctxt "gradual_infill_steps description" msgid "Number of times to reduce the infill density by half when getting further below top surfaces. Areas which are closer to top surfaces get a higher density, up to the Infill Density." msgstr "" #: fdmprinter.def.json msgctxt "gradual_infill_step_height label" msgid "Gradual Infill Step Height" msgstr "" #: fdmprinter.def.json msgctxt "gradual_infill_step_height description" msgid "The height of infill of a given density before switching to half the density." msgstr "" #: fdmprinter.def.json msgctxt "infill_before_walls label" msgid "Infill Before Walls" msgstr "" #: fdmprinter.def.json msgctxt "infill_before_walls description" msgid "Print the infill before printing the walls. Printing the walls first may lead to more accurate walls, but overhangs print worse. Printing the infill first leads to sturdier walls, but the infill pattern might sometimes show through the surface." msgstr "" #: fdmprinter.def.json msgctxt "min_infill_area label" msgid "Minimum Infill Area" msgstr "" #: fdmprinter.def.json msgctxt "min_infill_area description" msgid "Don't generate areas of infill smaller than this (use skin instead)." msgstr "" #: fdmprinter.def.json msgctxt "infill_support_enabled label" msgid "Infill Support" msgstr "" #: fdmprinter.def.json msgctxt "infill_support_enabled description" msgid "Print infill structures only where tops of the model should be supported. Enabling this reduces print time and material usage, but leads to ununiform object strength." msgstr "" #: fdmprinter.def.json msgctxt "infill_support_angle label" msgid "Infill Overhang Angle" msgstr "" #: fdmprinter.def.json msgctxt "infill_support_angle description" msgid "The minimum angle of internal overhangs for which infill is added. At a value of 0° objects are totally filled with infill, 90° will not provide any infill." msgstr "" #: fdmprinter.def.json msgctxt "skin_edge_support_thickness label" msgid "Skin Edge Support Thickness" msgstr "" #: fdmprinter.def.json msgctxt "skin_edge_support_thickness description" msgid "The thickness of the extra infill that supports skin edges." msgstr "" #: fdmprinter.def.json msgctxt "skin_edge_support_layers label" msgid "Skin Edge Support Layers" msgstr "" #: fdmprinter.def.json msgctxt "skin_edge_support_layers description" msgid "The number of infill layers that supports skin edges." msgstr "" #: fdmprinter.def.json msgctxt "lightning_infill_support_angle label" msgid "Lightning Infill Support Angle" msgstr "" #: fdmprinter.def.json msgctxt "lightning_infill_support_angle description" msgid "Determines when a lightning infill layer has to support anything above it. Measured in the angle given the thickness of a layer." msgstr "" #: fdmprinter.def.json msgctxt "lightning_infill_overhang_angle label" msgid "Lightning Infill Overhang Angle" msgstr "" #: fdmprinter.def.json msgctxt "lightning_infill_overhang_angle description" msgid "Determines when a lightning infill layer has to support the model above it. Measured in the angle given the thickness." msgstr "" #: fdmprinter.def.json msgctxt "lightning_infill_prune_angle label" msgid "Lightning Infill Prune Angle" msgstr "" #: fdmprinter.def.json msgctxt "lightning_infill_prune_angle description" msgid "The endpoints of infill lines are shortened to save on material. This setting is the angle of overhang of the endpoints of these lines." msgstr "" #: fdmprinter.def.json msgctxt "lightning_infill_straightening_angle label" msgid "Lightning Infill Straightening Angle" msgstr "" #: fdmprinter.def.json msgctxt "lightning_infill_straightening_angle description" msgid "The infill lines are straightened out to save on printing time. This is the maximum angle of overhang allowed across the length of the infill line." msgstr "" #: fdmprinter.def.json msgctxt "material label" msgid "Material" msgstr "" #: fdmprinter.def.json msgctxt "material description" msgid "Material" msgstr "" #: fdmprinter.def.json msgctxt "default_material_print_temperature label" msgid "Default Printing Temperature" msgstr "" #: fdmprinter.def.json msgctxt "default_material_print_temperature description" msgid "The default temperature used for printing. This should be the \"base\" temperature of a material. All other print temperatures should use offsets based on this value" msgstr "" #: fdmprinter.def.json msgctxt "build_volume_temperature label" msgid "Build Volume Temperature" msgstr "" #: fdmprinter.def.json msgctxt "build_volume_temperature description" msgid "The temperature of the environment to print in. If this is 0, the build volume temperature will not be adjusted." msgstr "" #: fdmprinter.def.json msgctxt "material_print_temperature label" msgid "Printing Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_print_temperature description" msgid "The temperature used for printing." msgstr "" #: fdmprinter.def.json msgctxt "material_print_temperature_layer_0 label" msgid "Printing Temperature Initial Layer" msgstr "" #: fdmprinter.def.json msgctxt "material_print_temperature_layer_0 description" msgid "The temperature used for printing the first layer. Set at 0 to disable special handling of the initial layer." msgstr "" #: fdmprinter.def.json msgctxt "material_initial_print_temperature label" msgid "Initial Printing Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_initial_print_temperature description" msgid "The minimal temperature while heating up to the Printing Temperature at which printing can already start." msgstr "" #: fdmprinter.def.json msgctxt "material_final_print_temperature label" msgid "Final Printing Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_final_print_temperature description" msgid "The temperature to which to already start cooling down just before the end of printing." msgstr "" #: fdmprinter.def.json msgctxt "material_extrusion_cool_down_speed label" msgid "Extrusion Cool Down Speed Modifier" msgstr "" #: fdmprinter.def.json msgctxt "material_extrusion_cool_down_speed description" msgid "The extra speed by which the nozzle cools while extruding. The same value is used to signify the heat up speed lost when heating up while extruding." msgstr "" #: fdmprinter.def.json msgctxt "default_material_bed_temperature label" msgid "Default Build Plate Temperature" msgstr "" #: fdmprinter.def.json msgctxt "default_material_bed_temperature description" msgid "The default temperature used for the heated build plate. This should be the \"base\" temperature of a build plate. All other print temperatures should use offsets based on this value" msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temperature label" msgid "Build Plate Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temperature description" msgid "The temperature used for the heated build plate. If this is 0, the build plate is left unheated." msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temperature_layer_0 label" msgid "Build Plate Temperature Initial Layer" msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temperature_layer_0 description" msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer." msgstr "" #: fdmprinter.def.json msgctxt "material_adhesion_tendency label" msgid "Adhesion Tendency" msgstr "" #: fdmprinter.def.json msgctxt "material_adhesion_tendency description" msgid "Surface adhesion tendency." msgstr "" #: fdmprinter.def.json msgctxt "material_surface_energy label" msgid "Surface Energy" msgstr "" #: fdmprinter.def.json msgctxt "material_surface_energy description" msgid "Surface energy." msgstr "" #: fdmprinter.def.json msgctxt "material_shrinkage_percentage label" msgid "Scaling Factor Shrinkage Compensation" msgstr "" #: fdmprinter.def.json msgctxt "material_shrinkage_percentage description" msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor." msgstr "" #: fdmprinter.def.json msgctxt "material_shrinkage_percentage_xy label" msgid "Horizontal Scaling Factor Shrinkage Compensation" msgstr "" #: fdmprinter.def.json msgctxt "material_shrinkage_percentage_xy description" msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)." msgstr "" #: fdmprinter.def.json msgctxt "material_shrinkage_percentage_z label" msgid "Vertical Scaling Factor Shrinkage Compensation" msgstr "" #: fdmprinter.def.json msgctxt "material_shrinkage_percentage_z description" msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)." msgstr "" #: fdmprinter.def.json msgctxt "material_crystallinity label" msgid "Crystalline Material" msgstr "" #: fdmprinter.def.json msgctxt "material_crystallinity description" msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?" msgstr "" #: fdmprinter.def.json msgctxt "material_anti_ooze_retracted_position label" msgid "Anti-ooze Retracted Position" msgstr "" #: fdmprinter.def.json msgctxt "material_anti_ooze_retracted_position description" msgid "How far the material needs to be retracted before it stops oozing." msgstr "" #: fdmprinter.def.json msgctxt "material_anti_ooze_retraction_speed label" msgid "Anti-ooze Retraction Speed" msgstr "" #: fdmprinter.def.json msgctxt "material_anti_ooze_retraction_speed description" msgid "How fast the material needs to be retracted during a filament switch to prevent oozing." msgstr "" #: fdmprinter.def.json msgctxt "material_break_preparation_retracted_position label" msgid "Break Preparation Retracted Position" msgstr "" #: fdmprinter.def.json msgctxt "material_break_preparation_retracted_position description" msgid "How far the filament can be stretched before it breaks, while heated." msgstr "" #: fdmprinter.def.json msgctxt "material_break_preparation_speed label" msgid "Break Preparation Retraction Speed" msgstr "" #: fdmprinter.def.json msgctxt "material_break_preparation_speed description" msgid "How fast the filament needs to be retracted just before breaking it off in a retraction." msgstr "" #: fdmprinter.def.json msgctxt "material_break_preparation_temperature label" msgid "Break Preparation Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_break_preparation_temperature description" msgid "The temperature used to purge material, should be roughly equal to the highest possible printing temperature." msgstr "" #: fdmprinter.def.json msgctxt "material_break_retracted_position label" msgid "Break Retracted Position" msgstr "" #: fdmprinter.def.json msgctxt "material_break_retracted_position description" msgid "How far to retract the filament in order to break it cleanly." msgstr "" #: fdmprinter.def.json msgctxt "material_break_speed label" msgid "Break Retraction Speed" msgstr "" #: fdmprinter.def.json msgctxt "material_break_speed description" msgid "The speed at which to retract the filament in order to break it cleanly." msgstr "" #: fdmprinter.def.json msgctxt "material_break_temperature label" msgid "Break Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_break_temperature description" msgid "The temperature at which the filament is broken for a clean break." msgstr "" #: fdmprinter.def.json msgctxt "material_flush_purge_speed label" msgid "Flush Purge Speed" msgstr "" #: fdmprinter.def.json msgctxt "material_flush_purge_speed description" msgid "How fast to prime the material after switching to a different material." msgstr "" #: fdmprinter.def.json msgctxt "material_flush_purge_length label" msgid "Flush Purge Length" msgstr "" #: fdmprinter.def.json msgctxt "material_flush_purge_length description" msgid "How much material to use to purge the previous material out of the nozzle (in length of filament) when switching to a different material." msgstr "" #: fdmprinter.def.json msgctxt "material_end_of_filament_purge_speed label" msgid "End of Filament Purge Speed" msgstr "" #: fdmprinter.def.json msgctxt "material_end_of_filament_purge_speed description" msgid "How fast to prime the material after replacing an empty spool with a fresh spool of the same material." msgstr "" #: fdmprinter.def.json msgctxt "material_end_of_filament_purge_length label" msgid "End of Filament Purge Length" msgstr "" #: fdmprinter.def.json msgctxt "material_end_of_filament_purge_length description" msgid "How much material to use to purge the previous material out of the nozzle (in length of filament) when replacing an empty spool with a fresh spool of the same material." msgstr "" #: fdmprinter.def.json msgctxt "material_maximum_park_duration label" msgid "Maximum Park Duration" msgstr "" #: fdmprinter.def.json msgctxt "material_maximum_park_duration description" msgid "How long the material can be kept out of dry storage safely." msgstr "" #: fdmprinter.def.json msgctxt "material_no_load_move_factor label" msgid "No Load Move Factor" msgstr "" #: fdmprinter.def.json msgctxt "material_no_load_move_factor description" msgid "A factor indicating how much the filament gets compressed between the feeder and the nozzle chamber, used to determine how far to move the material for a filament switch." msgstr "" #: fdmprinter.def.json msgctxt "material_flow label" msgid "Flow" msgstr "" #: fdmprinter.def.json msgctxt "material_flow description" msgid "Flow compensation: the amount of material extruded is multiplied by this value." msgstr "" #: fdmprinter.def.json msgctxt "wall_material_flow label" msgid "Wall Flow" msgstr "" #: fdmprinter.def.json msgctxt "wall_material_flow description" msgid "Flow compensation on wall lines." msgstr "" #: fdmprinter.def.json msgctxt "wall_0_material_flow label" msgid "Outer Wall Flow" msgstr "" #: fdmprinter.def.json msgctxt "wall_0_material_flow description" msgid "Flow compensation on the outermost wall line." msgstr "" #: fdmprinter.def.json msgctxt "wall_x_material_flow label" msgid "Inner Wall(s) Flow" msgstr "" #: fdmprinter.def.json msgctxt "wall_x_material_flow description" msgid "Flow compensation on wall lines for all wall lines except the outermost one." msgstr "" #: fdmprinter.def.json msgctxt "skin_material_flow label" msgid "Top/Bottom Flow" msgstr "" #: fdmprinter.def.json msgctxt "skin_material_flow description" msgid "Flow compensation on top/bottom lines." msgstr "" #: fdmprinter.def.json msgctxt "roofing_material_flow label" msgid "Top Surface Skin Flow" msgstr "" #: fdmprinter.def.json msgctxt "roofing_material_flow description" msgid "Flow compensation on lines of the areas at the top of the print." msgstr "" #: fdmprinter.def.json msgctxt "infill_material_flow label" msgid "Infill Flow" msgstr "" #: fdmprinter.def.json msgctxt "infill_material_flow description" msgid "Flow compensation on infill lines." msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_material_flow label" msgid "Skirt/Brim Flow" msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_material_flow description" msgid "Flow compensation on skirt or brim lines." msgstr "" #: fdmprinter.def.json msgctxt "support_material_flow label" msgid "Support Flow" msgstr "" #: fdmprinter.def.json msgctxt "support_material_flow description" msgid "Flow compensation on support structure lines." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_material_flow label" msgid "Support Interface Flow" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_material_flow description" msgid "Flow compensation on lines of support roof or floor." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_material_flow label" msgid "Support Roof Flow" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_material_flow description" msgid "Flow compensation on support roof lines." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_material_flow label" msgid "Support Floor Flow" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_material_flow description" msgid "Flow compensation on support floor lines." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_flow label" msgid "Prime Tower Flow" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_flow description" msgid "Flow compensation on prime tower lines." msgstr "" #: fdmprinter.def.json msgctxt "material_flow_layer_0 label" msgid "Initial Layer Flow" msgstr "" #: fdmprinter.def.json msgctxt "material_flow_layer_0 description" msgid "Flow compensation for the first layer: the amount of material extruded on the initial layer is multiplied by this value." msgstr "" #: fdmprinter.def.json msgctxt "wall_x_material_flow_layer_0 label" msgid "Initial Layer Inner Wall Flow" msgstr "" #: fdmprinter.def.json msgctxt "wall_x_material_flow_layer_0 description" msgid "Flow compensation on wall lines for all wall lines except the outermost one, but only for the first layer" msgstr "" #: fdmprinter.def.json msgctxt "wall_0_material_flow_layer_0 label" msgid "Initial Layer Outer Wall Flow" msgstr "" #: fdmprinter.def.json msgctxt "wall_0_material_flow_layer_0 description" msgid "Flow compensation on the outermost wall line of the first layer." msgstr "" #: fdmprinter.def.json msgctxt "skin_material_flow_layer_0 label" msgid "Initial Layer Bottom Flow" msgstr "" #: fdmprinter.def.json msgctxt "skin_material_flow_layer_0 description" msgid "Flow compensation on bottom lines of the first layer" msgstr "" #: fdmprinter.def.json msgctxt "material_standby_temperature label" msgid "Standby Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_standby_temperature description" msgid "The temperature of the nozzle when another nozzle is currently used for printing." msgstr "" #: fdmprinter.def.json msgctxt "speed label" msgid "Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed description" msgid "Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_print label" msgid "Print Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_print description" msgid "The speed at which printing happens." msgstr "" #: fdmprinter.def.json msgctxt "speed_infill label" msgid "Infill Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_infill description" msgid "The speed at which infill is printed." msgstr "" #: fdmprinter.def.json msgctxt "speed_wall label" msgid "Wall Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_wall description" msgid "The speed at which the walls are printed." msgstr "" #: fdmprinter.def.json msgctxt "speed_wall_0 label" msgid "Outer Wall Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_wall_0 description" msgid "The speed at which the outermost walls are printed. Printing the outer wall at a lower speed improves the final skin quality. However, having a large difference between the inner wall speed and the outer wall speed will affect quality in a negative way." msgstr "" #: fdmprinter.def.json msgctxt "speed_wall_x label" msgid "Inner Wall Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_wall_x description" msgid "The speed at which all inner walls are printed. Printing the inner wall faster than the outer wall will reduce printing time. It works well to set this in between the outer wall speed and the infill speed." msgstr "" #: fdmprinter.def.json msgctxt "speed_roofing label" msgid "Top Surface Skin Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_roofing description" msgid "The speed at which top surface skin layers are printed." msgstr "" #: fdmprinter.def.json msgctxt "speed_topbottom label" msgid "Top/Bottom Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_topbottom description" msgid "The speed at which top/bottom layers are printed." msgstr "" #: fdmprinter.def.json msgctxt "speed_support label" msgid "Support Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_support description" msgid "The speed at which the support structure is printed. Printing support at higher speeds can greatly reduce printing time. The surface quality of the support structure is not important since it is removed after printing." msgstr "" #: fdmprinter.def.json msgctxt "speed_support_infill label" msgid "Support Infill Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_support_infill description" msgid "The speed at which the infill of support is printed. Printing the infill at lower speeds improves stability." msgstr "" #: fdmprinter.def.json msgctxt "speed_support_interface label" msgid "Support Interface Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_support_interface description" msgid "The speed at which the roofs and floors of support are printed. Printing them at lower speeds can improve overhang quality." msgstr "" #: fdmprinter.def.json msgctxt "speed_support_roof label" msgid "Support Roof Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_support_roof description" msgid "The speed at which the roofs of support are printed. Printing them at lower speeds can improve overhang quality." msgstr "" #: fdmprinter.def.json msgctxt "speed_support_bottom label" msgid "Support Floor Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_support_bottom description" msgid "The speed at which the floor of support is printed. Printing it at lower speed can improve adhesion of support on top of your model." msgstr "" #: fdmprinter.def.json msgctxt "speed_prime_tower label" msgid "Prime Tower Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_prime_tower description" msgid "The speed at which the prime tower is printed. Printing the prime tower slower can make it more stable when the adhesion between the different filaments is suboptimal." msgstr "" #: fdmprinter.def.json msgctxt "speed_travel label" msgid "Travel Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_travel description" msgid "The speed at which travel moves are made." msgstr "" #: fdmprinter.def.json msgctxt "speed_layer_0 label" msgid "Initial Layer Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_layer_0 description" msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft." msgstr "" #: fdmprinter.def.json msgctxt "speed_print_layer_0 label" msgid "Initial Layer Print Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_print_layer_0 description" msgid "The speed of printing for the initial layer. A lower value is advised to improve adhesion to the build plate." msgstr "" #: fdmprinter.def.json msgctxt "speed_travel_layer_0 label" msgid "Initial Layer Travel Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_travel_layer_0 description" msgid "The speed of travel moves in the initial layer. A lower value is advised to prevent pulling previously printed parts away from the build plate. The value of this setting can automatically be calculated from the ratio between the Travel Speed and the Print Speed." msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_speed label" msgid "Skirt/Brim Speed" msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_speed description" msgid "The speed at which the skirt and brim are printed. Normally this is done at the initial layer speed, but sometimes you might want to print the skirt or brim at a different speed." msgstr "" #: fdmprinter.def.json msgctxt "speed_z_hop label" msgid "Z Hop Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_z_hop description" msgid "The speed at which the vertical Z movement is made for Z Hops. This is typically lower than the print speed since the build plate or machine's gantry is harder to move." msgstr "" #: fdmprinter.def.json msgctxt "speed_slowdown_layers label" msgid "Number of Slower Layers" msgstr "" #: fdmprinter.def.json msgctxt "speed_slowdown_layers description" msgid "The first few layers are printed slower than the rest of the model, to get better adhesion to the build plate and improve the overall success rate of prints. The speed is gradually increased over these layers." msgstr "" #: fdmprinter.def.json msgctxt "speed_equalize_flow_width_factor label" msgid "Flow Equalization Ratio" msgstr "" #: fdmprinter.def.json msgctxt "speed_equalize_flow_width_factor description" msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_enabled label" msgid "Enable Acceleration Control" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_enabled description" msgid "Enables adjusting the print head acceleration. Increasing the accelerations can reduce printing time at the cost of print quality." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_travel_enabled label" msgid "Enable Travel Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_travel_enabled description" msgid "Use a separate acceleration rate for travel moves. If disabled, travel moves will use the acceleration value of the printed line at their destination." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_print label" msgid "Print Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_print description" msgid "The acceleration with which printing happens." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_infill label" msgid "Infill Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_infill description" msgid "The acceleration with which infill is printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_wall label" msgid "Wall Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_wall description" msgid "The acceleration with which the walls are printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_wall_0 label" msgid "Outer Wall Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_wall_0 description" msgid "The acceleration with which the outermost walls are printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_wall_x label" msgid "Inner Wall Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_wall_x description" msgid "The acceleration with which all inner walls are printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_roofing label" msgid "Top Surface Skin Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_roofing description" msgid "The acceleration with which top surface skin layers are printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_topbottom label" msgid "Top/Bottom Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_topbottom description" msgid "The acceleration with which top/bottom layers are printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support label" msgid "Support Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support description" msgid "The acceleration with which the support structure is printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_infill label" msgid "Support Infill Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_infill description" msgid "The acceleration with which the infill of support is printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_interface label" msgid "Support Interface Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_interface description" msgid "The acceleration with which the roofs and floors of support are printed. Printing them at lower acceleration can improve overhang quality." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_roof label" msgid "Support Roof Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_roof description" msgid "The acceleration with which the roofs of support are printed. Printing them at lower acceleration can improve overhang quality." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_bottom label" msgid "Support Floor Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_bottom description" msgid "The acceleration with which the floors of support are printed. Printing them at lower acceleration can improve adhesion of support on top of your model." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_prime_tower label" msgid "Prime Tower Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_prime_tower description" msgid "The acceleration with which the prime tower is printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_travel label" msgid "Travel Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_travel description" msgid "The acceleration with which travel moves are made." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_layer_0 label" msgid "Initial Layer Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_layer_0 description" msgid "The acceleration for the initial layer." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_print_layer_0 label" msgid "Initial Layer Print Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_print_layer_0 description" msgid "The acceleration during the printing of the initial layer." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_travel_layer_0 label" msgid "Initial Layer Travel Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_travel_layer_0 description" msgid "The acceleration for travel moves in the initial layer." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_skirt_brim label" msgid "Skirt/Brim Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_skirt_brim description" msgid "The acceleration with which the skirt and brim are printed. Normally this is done with the initial layer acceleration, but sometimes you might want to print the skirt or brim at a different acceleration." msgstr "" #: fdmprinter.def.json msgctxt "jerk_enabled label" msgid "Enable Jerk Control" msgstr "" #: fdmprinter.def.json msgctxt "jerk_enabled description" msgid "Enables adjusting the jerk of print head when the velocity in the X or Y axis changes. Increasing the jerk can reduce printing time at the cost of print quality." msgstr "" #: fdmprinter.def.json msgctxt "jerk_travel_enabled label" msgid "Enable Travel Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_travel_enabled description" msgid "Use a separate jerk rate for travel moves. If disabled, travel moves will use the jerk value of the printed line at their destination." msgstr "" #: fdmprinter.def.json msgctxt "jerk_print label" msgid "Print Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_print description" msgid "The maximum instantaneous velocity change of the print head." msgstr "" #: fdmprinter.def.json msgctxt "jerk_infill label" msgid "Infill Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_infill description" msgid "The maximum instantaneous velocity change with which infill is printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_wall label" msgid "Wall Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_wall description" msgid "The maximum instantaneous velocity change with which the walls are printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_wall_0 label" msgid "Outer Wall Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_wall_0 description" msgid "The maximum instantaneous velocity change with which the outermost walls are printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_wall_x label" msgid "Inner Wall Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_wall_x description" msgid "The maximum instantaneous velocity change with which all inner walls are printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_roofing label" msgid "Top Surface Skin Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_roofing description" msgid "The maximum instantaneous velocity change with which top surface skin layers are printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_topbottom label" msgid "Top/Bottom Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_topbottom description" msgid "The maximum instantaneous velocity change with which top/bottom layers are printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_support label" msgid "Support Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_support description" msgid "The maximum instantaneous velocity change with which the support structure is printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_infill label" msgid "Support Infill Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_infill description" msgid "The maximum instantaneous velocity change with which the infill of support is printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_interface label" msgid "Support Interface Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_interface description" msgid "The maximum instantaneous velocity change with which the roofs and floors of support are printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_roof label" msgid "Support Roof Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_roof description" msgid "The maximum instantaneous velocity change with which the roofs of support are printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_bottom label" msgid "Support Floor Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_bottom description" msgid "The maximum instantaneous velocity change with which the floors of support are printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_prime_tower label" msgid "Prime Tower Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_prime_tower description" msgid "The maximum instantaneous velocity change with which the prime tower is printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_travel label" msgid "Travel Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_travel description" msgid "The maximum instantaneous velocity change with which travel moves are made." msgstr "" #: fdmprinter.def.json msgctxt "jerk_layer_0 label" msgid "Initial Layer Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_layer_0 description" msgid "The print maximum instantaneous velocity change for the initial layer." msgstr "" #: fdmprinter.def.json msgctxt "jerk_print_layer_0 label" msgid "Initial Layer Print Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_print_layer_0 description" msgid "The maximum instantaneous velocity change during the printing of the initial layer." msgstr "" #: fdmprinter.def.json msgctxt "jerk_travel_layer_0 label" msgid "Initial Layer Travel Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_travel_layer_0 description" msgid "The acceleration for travel moves in the initial layer." msgstr "" #: fdmprinter.def.json msgctxt "jerk_skirt_brim label" msgid "Skirt/Brim Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_skirt_brim description" msgid "The maximum instantaneous velocity change with which the skirt and brim are printed." msgstr "" #: fdmprinter.def.json msgctxt "travel label" msgid "Travel" msgstr "" #: fdmprinter.def.json msgctxt "travel description" msgid "travel" msgstr "" #: fdmprinter.def.json msgctxt "retraction_enable label" msgid "Enable Retraction" msgstr "" #: fdmprinter.def.json msgctxt "retraction_enable description" msgid "Retract the filament when the nozzle is moving over a non-printed area." msgstr "" #: fdmprinter.def.json msgctxt "retract_at_layer_change label" msgid "Retract at Layer Change" msgstr "" #: fdmprinter.def.json msgctxt "retract_at_layer_change description" msgid "Retract the filament when the nozzle is moving to the next layer." msgstr "" #: fdmprinter.def.json msgctxt "retraction_amount label" msgid "Retraction Distance" msgstr "" #: fdmprinter.def.json msgctxt "retraction_amount description" msgid "The length of material retracted during a retraction move." msgstr "" #: fdmprinter.def.json msgctxt "retraction_speed label" msgid "Retraction Speed" msgstr "" #: fdmprinter.def.json msgctxt "retraction_speed description" msgid "The speed at which the filament is retracted and primed during a retraction move." msgstr "" #: fdmprinter.def.json msgctxt "retraction_retract_speed label" msgid "Retraction Retract Speed" msgstr "" #: fdmprinter.def.json msgctxt "retraction_retract_speed description" msgid "The speed at which the filament is retracted during a retraction move." msgstr "" #: fdmprinter.def.json msgctxt "retraction_prime_speed label" msgid "Retraction Prime Speed" msgstr "" #: fdmprinter.def.json msgctxt "retraction_prime_speed description" msgid "The speed at which the filament is primed during a retraction move." msgstr "" #: fdmprinter.def.json msgctxt "retraction_extra_prime_amount label" msgid "Retraction Extra Prime Amount" msgstr "" #: fdmprinter.def.json msgctxt "retraction_extra_prime_amount description" msgid "Some material can ooze away during a travel move, which can be compensated for here." msgstr "" #: fdmprinter.def.json msgctxt "retraction_min_travel label" msgid "Retraction Minimum Travel" msgstr "" #: fdmprinter.def.json msgctxt "retraction_min_travel description" msgid "The minimum distance of travel needed for a retraction to happen at all. This helps to get fewer retractions in a small area." msgstr "" #: fdmprinter.def.json msgctxt "retraction_count_max label" msgid "Maximum Retraction Count" msgstr "" #: fdmprinter.def.json msgctxt "retraction_count_max description" msgid "This setting limits the number of retractions occurring within the minimum extrusion distance window. Further retractions within this window will be ignored. This avoids retracting repeatedly on the same piece of filament, as that can flatten the filament and cause grinding issues." msgstr "" #: fdmprinter.def.json msgctxt "retraction_extrusion_window label" msgid "Minimum Extrusion Distance Window" msgstr "" #: fdmprinter.def.json msgctxt "retraction_extrusion_window description" msgid "The window in which the maximum retraction count is enforced. This value should be approximately the same as the retraction distance, so that effectively the number of times a retraction passes the same patch of material is limited." msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing label" msgid "Combing Mode" msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing description" msgid "Combing keeps the nozzle within already printed areas when traveling. This results in slightly longer travel moves but reduces the need for retractions. If combing is off, the material will retract and the nozzle moves in a straight line to the next point. It is also possible to avoid combing over top/bottom skin areas or to only comb within the infill." msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing option off" msgid "Off" msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing option all" msgid "All" msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing option no_outer_surfaces" msgid "Not on Outer Surface" msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing option noskin" msgid "Not in Skin" msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing option infill" msgid "Within Infill" msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing_max_distance label" msgid "Max Comb Distance With No Retract" msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing_max_distance description" msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction." msgstr "" #: fdmprinter.def.json msgctxt "travel_retract_before_outer_wall label" msgid "Retract Before Outer Wall" msgstr "" #: fdmprinter.def.json msgctxt "travel_retract_before_outer_wall description" msgid "Always retract when moving to start an outer wall." msgstr "" #: fdmprinter.def.json msgctxt "travel_avoid_other_parts label" msgid "Avoid Printed Parts When Traveling" msgstr "" #: fdmprinter.def.json msgctxt "travel_avoid_other_parts description" msgid "The nozzle avoids already printed parts when traveling. This option is only available when combing is enabled." msgstr "" #: fdmprinter.def.json msgctxt "travel_avoid_supports label" msgid "Avoid Supports When Traveling" msgstr "" #: fdmprinter.def.json msgctxt "travel_avoid_supports description" msgid "The nozzle avoids already printed supports when traveling. This option is only available when combing is enabled." msgstr "" #: fdmprinter.def.json msgctxt "travel_avoid_distance label" msgid "Travel Avoid Distance" msgstr "" #: fdmprinter.def.json msgctxt "travel_avoid_distance description" msgid "The distance between the nozzle and already printed parts when avoiding during travel moves." msgstr "" #: fdmprinter.def.json msgctxt "layer_start_x label" msgid "Layer Start X" msgstr "" #: fdmprinter.def.json msgctxt "layer_start_x description" msgid "The X coordinate of the position near where to find the part to start printing each layer." msgstr "" #: fdmprinter.def.json msgctxt "layer_start_y label" msgid "Layer Start Y" msgstr "" #: fdmprinter.def.json msgctxt "layer_start_y description" msgid "The Y coordinate of the position near where to find the part to start printing each layer." msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_enabled label" msgid "Z Hop When Retracted" msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_enabled description" msgid "Whenever a retraction is done, the build plate is lowered to create clearance between the nozzle and the print. It prevents the nozzle from hitting the print during travel moves, reducing the chance to knock the print from the build plate." msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_only_when_collides label" msgid "Z Hop Only Over Printed Parts" msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_only_when_collides description" msgid "Only perform a Z Hop when moving over printed parts which cannot be avoided by horizontal motion by Avoid Printed Parts when Traveling." msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop label" msgid "Z Hop Height" msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop description" msgid "The height difference when performing a Z Hop." msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_after_extruder_switch label" msgid "Z Hop After Extruder Switch" msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_after_extruder_switch description" msgid "After the machine switched from one extruder to the other, the build plate is lowered to create clearance between the nozzle and the print. This prevents the nozzle from leaving oozed material on the outside of a print." msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_after_extruder_switch_height label" msgid "Z Hop After Extruder Switch Height" msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_after_extruder_switch_height description" msgid "The height difference when performing a Z Hop after extruder switch." msgstr "" #: fdmprinter.def.json msgctxt "cooling label" msgid "Cooling" msgstr "" #: fdmprinter.def.json msgctxt "cooling description" msgid "Cooling" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_enabled label" msgid "Enable Print Cooling" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_enabled description" msgid "Enables the print cooling fans while printing. The fans improve print quality on layers with short layer times and bridging / overhangs." msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed label" msgid "Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed description" msgid "The speed at which the print cooling fans spin." msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed_min label" msgid "Regular Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed_min description" msgid "The speed at which the fans spin before hitting the threshold. When a layer prints faster than the threshold, the fan speed gradually inclines towards the maximum fan speed." msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed_max label" msgid "Maximum Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed_max description" msgid "The speed at which the fans spin on the minimum layer time. The fan speed gradually increases between the regular fan speed and maximum fan speed when the threshold is hit." msgstr "" #: fdmprinter.def.json msgctxt "cool_min_layer_time_fan_speed_max label" msgid "Regular/Maximum Fan Speed Threshold" msgstr "" #: fdmprinter.def.json msgctxt "cool_min_layer_time_fan_speed_max description" msgid "The layer time which sets the threshold between regular fan speed and maximum fan speed. Layers that print slower than this time use regular fan speed. For faster layers the fan speed gradually increases towards the maximum fan speed." msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed_0 label" msgid "Initial Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed_0 description" msgid "The speed at which the fans spin at the start of the print. In subsequent layers the fan speed is gradually increased up to the layer corresponding to Regular Fan Speed at Height." msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_full_at_height label" msgid "Regular Fan Speed at Height" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_full_at_height description" msgid "The height at which the fans spin on regular fan speed. At the layers below the fan speed gradually increases from Initial Fan Speed to Regular Fan Speed." msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_full_layer label" msgid "Regular Fan Speed at Layer" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_full_layer description" msgid "The layer at which the fans spin on regular fan speed. If regular fan speed at height is set, this value is calculated and rounded to a whole number." msgstr "" #: fdmprinter.def.json msgctxt "cool_min_layer_time label" msgid "Minimum Layer Time" msgstr "" #: fdmprinter.def.json msgctxt "cool_min_layer_time description" msgid "The minimum time spent in a layer. This forces the printer to slow down, to at least spend the time set here in one layer. This allows the printed material to cool down properly before printing the next layer. Layers may still take shorter than the minimal layer time if Lift Head is disabled and if the Minimum Speed would otherwise be violated." msgstr "" #: fdmprinter.def.json msgctxt "cool_min_speed label" msgid "Minimum Speed" msgstr "" #: fdmprinter.def.json msgctxt "cool_min_speed description" msgid "The minimum print speed, despite slowing down due to the minimum layer time. When the printer would slow down too much, the pressure in the nozzle would be too low and result in bad print quality." msgstr "" #: fdmprinter.def.json msgctxt "cool_lift_head label" msgid "Lift Head" msgstr "" #: fdmprinter.def.json msgctxt "cool_lift_head description" msgid "When the minimum speed is hit because of minimum layer time, lift the head away from the print and wait the extra time until the minimum layer time is reached." msgstr "" #: fdmprinter.def.json msgctxt "cool_min_temperature label" msgid "Small Layer Printing Temperature" msgstr "" #: fdmprinter.def.json msgctxt "cool_min_temperature description" msgid "Gradually reduce to this temperature when printing at reduced speeds because of minimum layer time." msgstr "" #: fdmprinter.def.json msgctxt "support label" msgid "Support" msgstr "" #: fdmprinter.def.json msgctxt "support description" msgid "Support" msgstr "" #: fdmprinter.def.json msgctxt "support_enable label" msgid "Generate Support" msgstr "" #: fdmprinter.def.json msgctxt "support_enable description" msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing." msgstr "" #: fdmprinter.def.json msgctxt "support_extruder_nr label" msgid "Support Extruder" msgstr "" #: fdmprinter.def.json msgctxt "support_extruder_nr description" msgid "The extruder train to use for printing the support. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "support_infill_extruder_nr label" msgid "Support Infill Extruder" msgstr "" #: fdmprinter.def.json msgctxt "support_infill_extruder_nr description" msgid "The extruder train to use for printing the infill of the support. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "support_extruder_nr_layer_0 label" msgid "First Layer Support Extruder" msgstr "" #: fdmprinter.def.json msgctxt "support_extruder_nr_layer_0 description" msgid "The extruder train to use for printing the first layer of support infill. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_extruder_nr label" msgid "Support Interface Extruder" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_extruder_nr description" msgid "The extruder train to use for printing the roofs and floors of the support. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_extruder_nr label" msgid "Support Roof Extruder" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_extruder_nr description" msgid "The extruder train to use for printing the roofs of the support. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_extruder_nr label" msgid "Support Floor Extruder" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_extruder_nr description" msgid "The extruder train to use for printing the floors of the support. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "support_structure label" msgid "Support Structure" msgstr "" #: fdmprinter.def.json msgctxt "support_structure description" msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible." msgstr "" #: fdmprinter.def.json msgctxt "support_structure option normal" msgid "Normal" msgstr "" #: fdmprinter.def.json msgctxt "support_structure option tree" msgid "Tree" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_angle label" msgid "Maximum Branch Angle" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_angle description" msgid "The maximum angle of the branches while they grow around the model. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach." msgstr "" #: fdmprinter.def.json msgctxt "support_tree_branch_diameter label" msgid "Branch Diameter" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_branch_diameter description" msgid "The diameter of the thinnest branches of tree support. Thicker branches are more sturdy. Branches towards the base will be thicker than this." msgstr "" #: fdmprinter.def.json msgctxt "support_tree_max_diameter label" msgid "Trunk Diameter" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_max_diameter description" msgid "The diameter of the widest branches of tree support. A thicker trunk is more sturdy; a thinner trunk takes up less space on the build plate." msgstr "" #: fdmprinter.def.json msgctxt "support_tree_branch_diameter_angle label" msgid "Branch Diameter Angle" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_branch_diameter_angle description" msgid "The angle of the branches' diameter as they gradually become thicker towards the bottom. An angle of 0 will cause the branches to have uniform thickness over their length. A bit of an angle can increase stability of the tree support." msgstr "" #: fdmprinter.def.json msgctxt "support_type label" msgid "Support Placement" msgstr "" #: fdmprinter.def.json msgctxt "support_type description" msgid "Adjusts the placement of the support structures. The placement can be set to touching build plate or everywhere. When set to everywhere the support structures will also be printed on the model." msgstr "" #: fdmprinter.def.json msgctxt "support_type option buildplate" msgid "Touching Buildplate" msgstr "" #: fdmprinter.def.json msgctxt "support_type option everywhere" msgid "Everywhere" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_angle_slow label" msgid "Preferred Branch Angle" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_angle_slow description" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." msgstr "" #: fdmprinter.def.json msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model label" msgid "Diameter Increase To Model" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model description" msgid "The most the diameter of a branch that has to connect to the model may increase by merging with branches that could reach the buildplate. Increasing this reduces print time, but increases the area of support that rests on model" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_min_height_to_model label" msgid "Minimum Height To Model" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_min_height_to_model description" msgid "How tall a branch has to be if it is placed on the model. Prevents small blobs of support. This setting is ignored when a branch is supporting a support roof." msgstr "" #: fdmprinter.def.json msgctxt "support_tree_bp_diameter label" msgid "Initial Layer Diameter" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_bp_diameter description" msgid "Diameter every branch tries to achieve when reaching the buildplate. Improves bed adhesion." msgstr "" #: fdmprinter.def.json msgctxt "support_tree_top_rate label" msgid "Branch Density" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_top_rate description" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs, but the supports are harder to remove. Use Support Roof for very high values or ensure support density is similarly high at the top." msgstr "" #: fdmprinter.def.json msgctxt "support_tree_tip_diameter label" msgid "Tip Diameter" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_tip_diameter description" msgid "The diameter of the top of the tip of the branches of tree support." msgstr "" #: fdmprinter.def.json msgctxt "support_tree_limit_branch_reach label" msgid "Limit Branch Reach" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_limit_branch_reach description" msgid "Limit how far each branch should travel from the point it supports. This can make the support more sturdy, but will increase the amount of branches (and because of that material usage/print time)" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_branch_reach_limit label" msgid "Optimal Branch Range" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_branch_reach_limit description" msgid "A recomendation to how far branches can move from the points they support. Branches can violate this value to reach their destination (buildplate or a flat part of the model). Lowering this value will make the support more sturdy, but increase the amount of branches (and because of that material usage/print time) " msgstr "" #: fdmprinter.def.json msgctxt "support_tree_rest_preference label" msgid "Rest Preference" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_rest_preference description" msgid "The preferred placement of the support structures. If structures can't be placed at the preferred location, they will be place elsewhere, even if that means placing them on the model." msgstr "" #: fdmprinter.def.json msgctxt "support_tree_rest_preference option buildplate" msgid "Force Only Buildplate" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_rest_preference option graceful" msgid "On Model If Necessary" msgstr "" #: fdmprinter.def.json msgctxt "support_angle label" msgid "Support Overhang Angle" msgstr "" #: fdmprinter.def.json msgctxt "support_angle description" msgid "The minimum angle of overhangs for which support is added. At a value of 0° all overhangs are supported, 90° will not provide any support." msgstr "" #: fdmprinter.def.json msgctxt "support_pattern label" msgid "Support Pattern" msgstr "" #: fdmprinter.def.json msgctxt "support_pattern description" msgid "The pattern of the support structures of the print. The different options available result in sturdy or easy to remove support." msgstr "" #: fdmprinter.def.json msgctxt "support_pattern option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "support_pattern option grid" msgid "Grid" msgstr "" #: fdmprinter.def.json msgctxt "support_pattern option triangles" msgid "Triangles" msgstr "" #: fdmprinter.def.json msgctxt "support_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "support_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "support_pattern option cross" msgid "Cross" msgstr "" #: fdmprinter.def.json msgctxt "support_pattern option gyroid" msgid "Gyroid" msgstr "" #: fdmprinter.def.json msgctxt "support_wall_count label" msgid "Support Wall Line Count" msgstr "" #: fdmprinter.def.json msgctxt "support_wall_count description" msgid "The number of walls with which to surround support infill. Adding a wall can make support print more reliably and can support overhangs better, but increases print time and material used." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_wall_count label" msgid "Support Interface Wall Line Count" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_wall_count description" msgid "The number of walls with which to surround support interface. Adding a wall can make support print more reliably and can support overhangs better, but increases print time and material used." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_wall_count label" msgid "Support Roof Wall Line Count" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_wall_count description" msgid "The number of walls with which to surround support interface roof. Adding a wall can make support print more reliably and can support overhangs better, but increases print time and material used." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_wall_count label" msgid "Support Bottom Wall Line Count" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_wall_count description" msgid "The number of walls with which to surround support interface floor. Adding a wall can make support print more reliably and can support overhangs better, but increases print time and material used." msgstr "" #: fdmprinter.def.json msgctxt "zig_zaggify_support label" msgid "Connect Support Lines" msgstr "" #: fdmprinter.def.json msgctxt "zig_zaggify_support description" msgid "Connect the ends of the support lines together. Enabling this setting can make your support more sturdy and reduce underextrusion, but it will cost more material." msgstr "" #: fdmprinter.def.json msgctxt "support_connect_zigzags label" msgid "Connect Support ZigZags" msgstr "" #: fdmprinter.def.json msgctxt "support_connect_zigzags description" msgid "Connect the ZigZags. This will increase the strength of the zig zag support structure." msgstr "" #: fdmprinter.def.json msgctxt "support_infill_rate label" msgid "Support Density" msgstr "" #: fdmprinter.def.json msgctxt "support_infill_rate description" msgid "Adjusts the density of the support structure. A higher value results in better overhangs, but the supports are harder to remove." msgstr "" #: fdmprinter.def.json msgctxt "support_line_distance label" msgid "Support Line Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_line_distance description" msgid "Distance between the printed support structure lines. This setting is calculated by the support density." msgstr "" #: fdmprinter.def.json msgctxt "support_initial_layer_line_distance label" msgid "Initial Layer Support Line Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_initial_layer_line_distance description" msgid "Distance between the printed initial layer support structure lines. This setting is calculated by the support density." msgstr "" #: fdmprinter.def.json msgctxt "support_infill_angles label" msgid "Support Infill Line Directions" msgstr "" #: fdmprinter.def.json msgctxt "support_infill_angles description" msgid "A list of integer line directions to use. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the default angle 0 degrees." msgstr "" #: fdmprinter.def.json msgctxt "support_brim_enable label" msgid "Enable Support Brim" msgstr "" #: fdmprinter.def.json msgctxt "support_brim_enable description" msgid "Generate a brim within the support infill regions of the first layer. This brim is printed underneath the support, not around it. Enabling this setting increases the adhesion of support to the build plate." msgstr "" #: fdmprinter.def.json msgctxt "support_brim_width label" msgid "Support Brim Width" msgstr "" #: fdmprinter.def.json msgctxt "support_brim_width description" msgid "The width of the brim to print underneath the support. A larger brim enhances adhesion to the build plate, at the cost of some extra material." msgstr "" #: fdmprinter.def.json msgctxt "support_brim_line_count label" msgid "Support Brim Line Count" msgstr "" #: fdmprinter.def.json msgctxt "support_brim_line_count description" msgid "The number of lines used for the support brim. More brim lines enhance adhesion to the build plate, at the cost of some extra material." msgstr "" #: fdmprinter.def.json msgctxt "support_z_distance label" msgid "Support Z Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_z_distance description" msgid "Distance from the top/bottom of the support structure to the print. This gap provides clearance to remove the supports after the model is printed. This value is rounded up to a multiple of the layer height." msgstr "" #: fdmprinter.def.json msgctxt "support_top_distance label" msgid "Support Top Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_top_distance description" msgid "Distance from the top of the support to the print." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_distance label" msgid "Support Bottom Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_distance description" msgid "Distance from the print to the bottom of the support." msgstr "" #: fdmprinter.def.json msgctxt "support_xy_distance label" msgid "Support X/Y Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_xy_distance description" msgid "Distance of the support structure from the print in the X/Y directions." msgstr "" #: fdmprinter.def.json msgctxt "support_xy_overrides_z label" msgid "Support Distance Priority" msgstr "" #: fdmprinter.def.json msgctxt "support_xy_overrides_z description" msgid "Whether the Support X/Y Distance overrides the Support Z Distance or vice versa. When X/Y overrides Z the X/Y distance can push away the support from the model, influencing the actual Z distance to the overhang. We can disable this by not applying the X/Y distance around overhangs." msgstr "" #: fdmprinter.def.json msgctxt "support_xy_overrides_z option xy_overrides_z" msgid "X/Y overrides Z" msgstr "" #: fdmprinter.def.json msgctxt "support_xy_overrides_z option z_overrides_xy" msgid "Z overrides X/Y" msgstr "" #: fdmprinter.def.json msgctxt "support_xy_distance_overhang label" msgid "Minimum Support X/Y Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_xy_distance_overhang description" msgid "Distance of the support structure from the overhang in the X/Y directions." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_stair_step_height label" msgid "Support Stair Step Height" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_stair_step_height description" msgid "The height of the steps of the stair-like bottom of support resting on the model. A low value makes the support harder to remove, but too high values can lead to unstable support structures. Set to zero to turn off the stair-like behaviour." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_stair_step_width label" msgid "Support Stair Step Maximum Width" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_stair_step_width description" msgid "The maximum width of the steps of the stair-like bottom of support resting on the model. A low value makes the support harder to remove, but too high values can lead to unstable support structures." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_stair_step_min_slope label" msgid "Support Stair Step Minimum Slope Angle" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_stair_step_min_slope description" msgid "The minimum slope of the area for stair-stepping to take effect. Low values should make support easier to remove on shallower slopes, but really low values may result in some very counter-intuitive results on other parts of the model." msgstr "" #: fdmprinter.def.json msgctxt "support_join_distance label" msgid "Support Join Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_join_distance description" msgid "The maximum distance between support structures in the X/Y directions. When separate structures are closer together than this value, the structures merge into one." msgstr "" #: fdmprinter.def.json msgctxt "support_offset label" msgid "Support Horizontal Expansion" msgstr "" #: fdmprinter.def.json msgctxt "support_offset description" msgid "Amount of offset applied to all support polygons in each layer. Positive values can smooth out the support areas and result in more sturdy support." msgstr "" #: fdmprinter.def.json msgctxt "support_infill_sparse_thickness label" msgid "Support Infill Layer Thickness" msgstr "" #: fdmprinter.def.json msgctxt "support_infill_sparse_thickness description" msgid "The thickness per layer of support infill material. This value should always be a multiple of the layer height and is otherwise rounded." msgstr "" #: fdmprinter.def.json msgctxt "gradual_support_infill_steps label" msgid "Gradual Support Infill Steps" msgstr "" #: fdmprinter.def.json msgctxt "gradual_support_infill_steps description" msgid "Number of times to reduce the support infill density by half when getting further below top surfaces. Areas which are closer to top surfaces get a higher density, up to the Support Infill Density." msgstr "" #: fdmprinter.def.json msgctxt "gradual_support_infill_step_height label" msgid "Gradual Support Infill Step Height" msgstr "" #: fdmprinter.def.json msgctxt "gradual_support_infill_step_height description" msgid "The height of support infill of a given density before switching to half the density." msgstr "" #: fdmprinter.def.json msgctxt "minimum_support_area label" msgid "Minimum Support Area" msgstr "" #: fdmprinter.def.json msgctxt "minimum_support_area description" msgid "Minimum area size for support polygons. Polygons which have an area smaller than this value will not be generated." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_enable label" msgid "Enable Support Interface" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_enable description" msgid "Generate a dense interface between the model and the support. This will create a skin at the top of the support on which the model is printed and at the bottom of the support, where it rests on the model." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_enable label" msgid "Enable Support Roof" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_enable description" msgid "Generate a dense slab of material between the top of support and the model. This will create a skin between the model and support." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_enable label" msgid "Enable Support Floor" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_enable description" msgid "Generate a dense slab of material between the bottom of the support and the model. This will create a skin between the model and support." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_height label" msgid "Support Interface Thickness" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_height description" msgid "The thickness of the interface of the support where it touches with the model on the bottom or the top." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_height label" msgid "Support Roof Thickness" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_height description" msgid "The thickness of the support roofs. This controls the amount of dense layers at the top of the support on which the model rests." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_height label" msgid "Support Floor Thickness" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_height description" msgid "The thickness of the support floors. This controls the number of dense layers that are printed on top of places of a model on which support rests." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_skip_height label" msgid "Support Interface Resolution" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_skip_height description" msgid "When checking where there's model above and below the support, take steps of the given height. Lower values will slice slower, while higher values may cause normal support to be printed in some places where there should have been support interface." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_density label" msgid "Support Interface Density" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_density description" msgid "Adjusts the density of the roofs and floors of the support structure. A higher value results in better overhangs, but the supports are harder to remove." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_density label" msgid "Support Roof Density" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_density description" msgid "The density of the roofs of the support structure. A higher value results in better overhangs, but the supports are harder to remove." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_line_distance label" msgid "Support Roof Line Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_line_distance description" msgid "Distance between the printed support roof lines. This setting is calculated by the Support Roof Density, but can be adjusted separately." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_density label" msgid "Support Floor Density" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_density description" msgid "The density of the floors of the support structure. A higher value results in better adhesion of the support on top of the model." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_line_distance label" msgid "Support Floor Line Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_line_distance description" msgid "Distance between the printed support floor lines. This setting is calculated by the Support Floor Density, but can be adjusted separately." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_pattern label" msgid "Support Interface Pattern" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_pattern description" msgid "The pattern with which the interface of the support with the model is printed." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_pattern option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_pattern option grid" msgid "Grid" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_pattern option triangles" msgid "Triangles" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_pattern label" msgid "Support Roof Pattern" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_pattern description" msgid "The pattern with which the roofs of the support are printed." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_pattern option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_pattern option grid" msgid "Grid" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_pattern option triangles" msgid "Triangles" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_pattern label" msgid "Support Floor Pattern" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_pattern description" msgid "The pattern with which the floors of the support are printed." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_pattern option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_pattern option grid" msgid "Grid" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_pattern option triangles" msgid "Triangles" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "minimum_interface_area label" msgid "Minimum Support Interface Area" msgstr "" #: fdmprinter.def.json msgctxt "minimum_interface_area description" msgid "Minimum area size for support interface polygons. Polygons which have an area smaller than this value will be printed as normal support." msgstr "" #: fdmprinter.def.json msgctxt "minimum_roof_area label" msgid "Minimum Support Roof Area" msgstr "" #: fdmprinter.def.json msgctxt "minimum_roof_area description" msgid "Minimum area size for the roofs of the support. Polygons which have an area smaller than this value will be printed as normal support." msgstr "" #: fdmprinter.def.json msgctxt "minimum_bottom_area label" msgid "Minimum Support Floor Area" msgstr "" #: fdmprinter.def.json msgctxt "minimum_bottom_area description" msgid "Minimum area size for the floors of the support. Polygons which have an area smaller than this value will be printed as normal support." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_offset label" msgid "Support Interface Horizontal Expansion" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_offset description" msgid "Amount of offset applied to the support interface polygons." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_offset label" msgid "Support Roof Horizontal Expansion" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_offset description" msgid "Amount of offset applied to the roofs of the support." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_offset label" msgid "Support Floor Horizontal Expansion" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_offset description" msgid "Amount of offset applied to the floors of the support." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_priority label" msgid "Support Interface Priority" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_priority description" msgid "How support interface and support will interact when they overlap. Currently only implemented for support roof." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_priority option support_area_overwrite_interface_area" msgid "Support preferred" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_priority option interface_area_overwrite_support_area" msgid "Interface preferred" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_priority option support_lines_overwrite_interface_area" msgid "Support lines preferred" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_priority option interface_lines_overwrite_support_area" msgid "Interface lines preferred" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_priority option nothing" msgid "Both overlap" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_angles label" msgid "Support Interface Line Directions" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_angles description" msgid "A list of integer line directions to use. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the default angles (alternates between 45 and 135 degrees if interfaces are quite thick or 90 degrees)." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_angles label" msgid "Support Roof Line Directions" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_angles description" msgid "A list of integer line directions to use. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the default angles (alternates between 45 and 135 degrees if interfaces are quite thick or 90 degrees)." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_angles label" msgid "Support Floor Line Directions" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_angles description" msgid "A list of integer line directions to use. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the default angles (alternates between 45 and 135 degrees if interfaces are quite thick or 90 degrees)." msgstr "" #: fdmprinter.def.json msgctxt "support_fan_enable label" msgid "Fan Speed Override" msgstr "" #: fdmprinter.def.json msgctxt "support_fan_enable description" msgid "When enabled, the print cooling fan speed is altered for the skin regions immediately above the support." msgstr "" #: fdmprinter.def.json msgctxt "support_supported_skin_fan_speed label" msgid "Supported Skin Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "support_supported_skin_fan_speed description" msgid "Percentage fan speed to use when printing the skin regions immediately above the support. Using a high fan speed can make the support easier to remove." msgstr "" #: fdmprinter.def.json msgctxt "support_use_towers label" msgid "Use Towers" msgstr "" #: fdmprinter.def.json msgctxt "support_use_towers description" msgid "Use specialized towers to support tiny overhang areas. These towers have a larger diameter than the region they support. Near the overhang the towers' diameter decreases, forming a roof." msgstr "" #: fdmprinter.def.json msgctxt "support_tower_diameter label" msgid "Tower Diameter" msgstr "" #: fdmprinter.def.json msgctxt "support_tower_diameter description" msgid "The diameter of a special tower." msgstr "" #: fdmprinter.def.json msgctxt "support_tower_maximum_supported_diameter label" msgid "Maximum Tower-Supported Diameter" msgstr "" #: fdmprinter.def.json msgctxt "support_tower_maximum_supported_diameter description" msgid "Maximum diameter in the X/Y directions of a small area which is to be supported by a specialized support tower." msgstr "" #: fdmprinter.def.json msgctxt "support_tower_roof_angle label" msgid "Tower Roof Angle" msgstr "" #: fdmprinter.def.json msgctxt "support_tower_roof_angle description" msgid "The angle of a rooftop of a tower. A higher value results in pointed tower roofs, a lower value results in flattened tower roofs." msgstr "" #: fdmprinter.def.json msgctxt "support_mesh_drop_down label" msgid "Drop Down Support Mesh" msgstr "" #: fdmprinter.def.json msgctxt "support_mesh_drop_down description" msgid "Make support everywhere below the support mesh, so that there's no overhang in the support mesh." msgstr "" #: fdmprinter.def.json msgctxt "support_meshes_present label" msgid "Scene Has Support Meshes" msgstr "" #: fdmprinter.def.json msgctxt "support_meshes_present description" msgid "There are support meshes present in the scene. This setting is controlled by Cura." msgstr "" #: fdmprinter.def.json msgctxt "platform_adhesion label" msgid "Build Plate Adhesion" msgstr "" #: fdmprinter.def.json msgctxt "platform_adhesion description" msgid "Adhesion" msgstr "" #: fdmprinter.def.json msgctxt "prime_blob_enable label" msgid "Enable Prime Blob" msgstr "" #: fdmprinter.def.json msgctxt "prime_blob_enable description" msgid "Whether to prime the filament with a blob before printing. Turning this setting on will ensure that the extruder will have material ready at the nozzle before printing. Printing Brim or Skirt can act like priming too, in which case turning this setting off saves some time." msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_x label" msgid "Extruder Prime X Position" msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_x description" msgid "The X coordinate of the position where the nozzle primes at the start of printing." msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_y label" msgid "Extruder Prime Y Position" msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_y description" msgid "The Y coordinate of the position where the nozzle primes at the start of printing." msgstr "" #: fdmprinter.def.json msgctxt "adhesion_type label" msgid "Build Plate Adhesion Type" msgstr "" #: fdmprinter.def.json msgctxt "adhesion_type description" msgid "Different options that help to improve both priming your extrusion and adhesion to the build plate. Brim adds a single layer flat area around the base of your model to prevent warping. Raft adds a thick grid with a roof below the model. Skirt is a line printed around the model, but not connected to the model." msgstr "" #: fdmprinter.def.json msgctxt "adhesion_type option skirt" msgid "Skirt" msgstr "" #: fdmprinter.def.json msgctxt "adhesion_type option brim" msgid "Brim" msgstr "" #: fdmprinter.def.json msgctxt "adhesion_type option raft" msgid "Raft" msgstr "" #: fdmprinter.def.json msgctxt "adhesion_type option none" msgid "None" msgstr "" #: fdmprinter.def.json msgctxt "adhesion_extruder_nr label" msgid "Build Plate Adhesion Extruder" msgstr "" #: fdmprinter.def.json msgctxt "adhesion_extruder_nr description" msgid "The extruder train to use for printing the skirt/brim/raft. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_extruder_nr label" msgid "Skirt/Brim Extruder" msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_extruder_nr description" msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_extruder_nr label" msgid "Raft Base Extruder" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_extruder_nr description" msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_extruder_nr label" msgid "Raft Middle Extruder" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_extruder_nr description" msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_extruder_nr label" msgid "Raft Top Extruder" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_extruder_nr description" msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "skirt_line_count label" msgid "Skirt Line Count" msgstr "" #: fdmprinter.def.json msgctxt "skirt_line_count description" msgid "Multiple skirt lines help to prime your extrusion better for small models. Setting this to 0 will disable the skirt." msgstr "" #: fdmprinter.def.json msgctxt "skirt_height label" msgid "Skirt Height" msgstr "" #: fdmprinter.def.json msgctxt "skirt_height description" msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt." msgstr "" #: fdmprinter.def.json msgctxt "skirt_gap label" msgid "Skirt Distance" msgstr "" #: fdmprinter.def.json msgctxt "skirt_gap description" msgid "The horizontal distance between the skirt and the first layer of the print.\nThis is the minimum distance. Multiple skirt lines will extend outwards from this distance." msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_minimal_length label" msgid "Skirt/Brim Minimum Length" msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_minimal_length description" msgid "The minimum length of the skirt or brim. If this length is not reached by all skirt or brim lines together, more skirt or brim lines will be added until the minimum length is reached. Note: If the line count is set to 0 this is ignored." msgstr "" #: fdmprinter.def.json msgctxt "brim_width label" msgid "Brim Width" msgstr "" #: fdmprinter.def.json msgctxt "brim_width description" msgid "The distance from the model to the outermost brim line. A larger brim enhances adhesion to the build plate, but also reduces the effective print area." msgstr "" #: fdmprinter.def.json msgctxt "brim_line_count label" msgid "Brim Line Count" msgstr "" #: fdmprinter.def.json msgctxt "brim_line_count description" msgid "The number of lines used for a brim. More brim lines enhance adhesion to the build plate, but also reduces the effective print area." msgstr "" #: fdmprinter.def.json msgctxt "brim_gap label" msgid "Brim Distance" msgstr "" #: fdmprinter.def.json msgctxt "brim_gap description" msgid "The horizontal distance between the first brim line and the outline of the first layer of the print. A small gap can make the brim easier to remove while still providing the thermal benefits." msgstr "" #: fdmprinter.def.json msgctxt "brim_replaces_support label" msgid "Brim Replaces Support" msgstr "" #: fdmprinter.def.json msgctxt "brim_replaces_support description" msgid "Enforce brim to be printed around the model even if that space would otherwise be occupied by support. This replaces some regions of the first layer of support by brim regions." msgstr "" #: fdmprinter.def.json msgctxt "brim_outside_only label" msgid "Brim Only on Outside" msgstr "" #: fdmprinter.def.json msgctxt "brim_outside_only description" msgid "Only print the brim on the outside of the model. This reduces the amount of brim you need to remove afterwards, while it doesn't reduce the bed adhesion that much." msgstr "" #: fdmprinter.def.json msgctxt "brim_inside_margin label" msgid "Brim Inside Avoid Margin" msgstr "" #: fdmprinter.def.json msgctxt "brim_inside_margin description" msgid "A part fully enclosed inside another part can generate an outer brim that touches the inside of the other part. This removes all brim within this distance from internal holes." msgstr "" #: fdmprinter.def.json msgctxt "brim_smart_ordering label" msgid "Smart Brim" msgstr "" #: fdmprinter.def.json msgctxt "brim_smart_ordering description" msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal." msgstr "" #: fdmprinter.def.json msgctxt "raft_margin label" msgid "Raft Extra Margin" msgstr "" #: fdmprinter.def.json msgctxt "raft_margin description" msgid "If the raft is enabled, this is the extra raft area around the model which is also given a raft. Increasing this margin will create a stronger raft while using more material and leaving less area for your print." msgstr "" #: fdmprinter.def.json msgctxt "raft_smoothing label" msgid "Raft Smoothing" msgstr "" #: fdmprinter.def.json msgctxt "raft_smoothing description" msgid "This setting controls how much inner corners in the raft outline are rounded. Inward corners are rounded to a semi circle with a radius equal to the value given here. This setting also removes holes in the raft outline which are smaller than such a circle." msgstr "" #: fdmprinter.def.json msgctxt "raft_airgap label" msgid "Raft Air Gap" msgstr "" #: fdmprinter.def.json msgctxt "raft_airgap description" msgid "The gap between the final raft layer and the first layer of the model. Only the first layer is raised by this amount to lower the bonding between the raft layer and the model. Makes it easier to peel off the raft." msgstr "" #: fdmprinter.def.json msgctxt "layer_0_z_overlap label" msgid "Initial Layer Z Overlap" msgstr "" #: fdmprinter.def.json msgctxt "layer_0_z_overlap description" msgid "Make the first and second layer of the model overlap in the Z direction to compensate for the filament lost in the airgap. All models above the first model layer will be shifted down by this amount." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_layers label" msgid "Raft Top Layers" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_layers description" msgid "The number of top layers on top of the 2nd raft layer. These are fully filled layers that the model sits on. 2 layers result in a smoother top surface than 1." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_thickness label" msgid "Raft Top Layer Thickness" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_thickness description" msgid "Layer thickness of the top raft layers." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_line_width label" msgid "Raft Top Line Width" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_line_width description" msgid "Width of the lines in the top surface of the raft. These can be thin lines so that the top of the raft becomes smooth." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_line_spacing label" msgid "Raft Top Spacing" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_line_spacing description" msgid "The distance between the raft lines for the top raft layers. The spacing should be equal to the line width, so that the surface is solid." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_layers label" msgid "Raft Middle Layers" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_layers description" msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_thickness label" msgid "Raft Middle Thickness" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_thickness description" msgid "Layer thickness of the middle raft layer." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_line_width label" msgid "Raft Middle Line Width" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_line_width description" msgid "Width of the lines in the middle raft layer. Making the second layer extrude more causes the lines to stick to the build plate." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_line_spacing label" msgid "Raft Middle Spacing" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_line_spacing description" msgid "The distance between the raft lines for the middle raft layer. The spacing of the middle should be quite wide, while being dense enough to support the top raft layers." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_thickness label" msgid "Raft Base Thickness" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_thickness description" msgid "Layer thickness of the base raft layer. This should be a thick layer which sticks firmly to the printer build plate." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_line_width label" msgid "Raft Base Line Width" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_line_width description" msgid "Width of the lines in the base raft layer. These should be thick lines to assist in build plate adhesion." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_line_spacing label" msgid "Raft Base Line Spacing" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_line_spacing description" msgid "The distance between the raft lines for the base raft layer. Wide spacing makes for easy removal of the raft from the build plate." msgstr "" #: fdmprinter.def.json msgctxt "raft_speed label" msgid "Raft Print Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_speed description" msgid "The speed at which the raft is printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_speed label" msgid "Raft Top Print Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_speed description" msgid "The speed at which the top raft layers are printed. These should be printed a bit slower, so that the nozzle can slowly smooth out adjacent surface lines." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_speed label" msgid "Raft Middle Print Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_speed description" msgid "The speed at which the middle raft layer is printed. This should be printed quite slowly, as the volume of material coming out of the nozzle is quite high." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_speed label" msgid "Raft Base Print Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_speed description" msgid "The speed at which the base raft layer is printed. This should be printed quite slowly, as the volume of material coming out of the nozzle is quite high." msgstr "" #: fdmprinter.def.json msgctxt "raft_acceleration label" msgid "Raft Print Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "raft_acceleration description" msgid "The acceleration with which the raft is printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_acceleration label" msgid "Raft Top Print Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_acceleration description" msgid "The acceleration with which the top raft layers are printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_acceleration label" msgid "Raft Middle Print Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_acceleration description" msgid "The acceleration with which the middle raft layer is printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_acceleration label" msgid "Raft Base Print Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_acceleration description" msgid "The acceleration with which the base raft layer is printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_jerk label" msgid "Raft Print Jerk" msgstr "" #: fdmprinter.def.json msgctxt "raft_jerk description" msgid "The jerk with which the raft is printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_jerk label" msgid "Raft Top Print Jerk" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_jerk description" msgid "The jerk with which the top raft layers are printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_jerk label" msgid "Raft Middle Print Jerk" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_jerk description" msgid "The jerk with which the middle raft layer is printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_jerk label" msgid "Raft Base Print Jerk" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_jerk description" msgid "The jerk with which the base raft layer is printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_fan_speed label" msgid "Raft Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_fan_speed description" msgid "The fan speed for the raft." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_fan_speed label" msgid "Raft Top Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_fan_speed description" msgid "The fan speed for the top raft layers." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_fan_speed label" msgid "Raft Middle Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_fan_speed description" msgid "The fan speed for the middle raft layer." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_fan_speed label" msgid "Raft Base Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_fan_speed description" msgid "The fan speed for the base raft layer." msgstr "" #: fdmprinter.def.json msgctxt "dual label" msgid "Dual Extrusion" msgstr "" #: fdmprinter.def.json msgctxt "dual description" msgid "Settings used for printing with multiple extruders." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_enable label" msgid "Enable Prime Tower" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_enable description" msgid "Print a tower next to the print which serves to prime the material after each nozzle switch." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_size label" msgid "Prime Tower Size" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_size description" msgid "The width of the prime tower." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_min_volume label" msgid "Prime Tower Minimum Volume" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_min_volume description" msgid "The minimum volume for each layer of the prime tower in order to purge enough material." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_position_x label" msgid "Prime Tower X Position" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_position_x description" msgid "The x coordinate of the position of the prime tower." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_position_y label" msgid "Prime Tower Y Position" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_position_y description" msgid "The y coordinate of the position of the prime tower." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_wipe_enabled label" msgid "Wipe Inactive Nozzle on Prime Tower" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_wipe_enabled description" msgid "After printing the prime tower with one nozzle, wipe the oozed material from the other nozzle off on the prime tower." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_brim_enable label" msgid "Prime Tower Brim" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_brim_enable description" msgid "Prime-towers might need the extra adhesion afforded by a brim even if the model doesn't. Presently can't be used with the 'Raft' adhesion-type." msgstr "" #: fdmprinter.def.json msgctxt "ooze_shield_enabled label" msgid "Enable Ooze Shield" msgstr "" #: fdmprinter.def.json msgctxt "ooze_shield_enabled description" msgid "Enable exterior ooze shield. This will create a shell around the model which is likely to wipe a second nozzle if it's at the same height as the first nozzle." msgstr "" #: fdmprinter.def.json msgctxt "ooze_shield_angle label" msgid "Ooze Shield Angle" msgstr "" #: fdmprinter.def.json msgctxt "ooze_shield_angle description" msgid "The maximum angle a part in the ooze shield will have. With 0 degrees being vertical, and 90 degrees being horizontal. A smaller angle leads to less failed ooze shields, but more material." msgstr "" #: fdmprinter.def.json msgctxt "ooze_shield_dist label" msgid "Ooze Shield Distance" msgstr "" #: fdmprinter.def.json msgctxt "ooze_shield_dist description" msgid "Distance of the ooze shield from the print, in the X/Y directions." msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_retraction_amount label" msgid "Nozzle Switch Retraction Distance" msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_retraction_amount description" msgid "The amount of retraction when switching extruders. Set to 0 for no retraction at all. This should generally be the same as the length of the heat zone." msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_retraction_speeds label" msgid "Nozzle Switch Retraction Speed" msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_retraction_speeds description" msgid "The speed at which the filament is retracted. A higher retraction speed works better, but a very high retraction speed can lead to filament grinding." msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_retraction_speed label" msgid "Nozzle Switch Retract Speed" msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_retraction_speed description" msgid "The speed at which the filament is retracted during a nozzle switch retract." msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_prime_speed label" msgid "Nozzle Switch Prime Speed" msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_prime_speed description" msgid "The speed at which the filament is pushed back after a nozzle switch retraction." msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_extra_prime_amount label" msgid "Nozzle Switch Extra Prime Amount" msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_extra_prime_amount description" msgid "Extra material to prime after nozzle switching." msgstr "" #: fdmprinter.def.json msgctxt "meshfix label" msgid "Mesh Fixes" msgstr "" #: fdmprinter.def.json msgctxt "meshfix description" msgid "Make the meshes more suited for 3D printing." msgstr "" #: fdmprinter.def.json msgctxt "meshfix_union_all label" msgid "Union Overlapping Volumes" msgstr "" #: fdmprinter.def.json msgctxt "meshfix_union_all description" msgid "Ignore the internal geometry arising from overlapping volumes within a mesh and print the volumes as one. This may cause unintended internal cavities to disappear." msgstr "" #: fdmprinter.def.json msgctxt "meshfix_union_all_remove_holes label" msgid "Remove All Holes" msgstr "" #: fdmprinter.def.json msgctxt "meshfix_union_all_remove_holes description" msgid "Remove the holes in each layer and keep only the outside shape. This will ignore any invisible internal geometry. However, it also ignores layer holes which can be viewed from above or below." msgstr "" #: fdmprinter.def.json msgctxt "meshfix_extensive_stitching label" msgid "Extensive Stitching" msgstr "" #: fdmprinter.def.json msgctxt "meshfix_extensive_stitching description" msgid "Extensive stitching tries to stitch up open holes in the mesh by closing the hole with touching polygons. This option can introduce a lot of processing time." msgstr "" #: fdmprinter.def.json msgctxt "meshfix_keep_open_polygons label" msgid "Keep Disconnected Faces" msgstr "" #: fdmprinter.def.json msgctxt "meshfix_keep_open_polygons description" msgid "Normally Cura tries to stitch up small holes in the mesh and remove parts of a layer with big holes. Enabling this option keeps those parts which cannot be stitched. This option should be used as a last resort option when everything else fails to produce proper g-code." msgstr "" #: fdmprinter.def.json msgctxt "multiple_mesh_overlap label" msgid "Merged Meshes Overlap" msgstr "" #: fdmprinter.def.json msgctxt "multiple_mesh_overlap description" msgid "Make meshes which are touching each other overlap a bit. This makes them bond together better." msgstr "" #: fdmprinter.def.json msgctxt "carve_multiple_volumes label" msgid "Remove Mesh Intersection" msgstr "" #: fdmprinter.def.json msgctxt "carve_multiple_volumes description" msgid "Remove areas where multiple meshes are overlapping with each other. This may be used if merged dual material objects overlap with each other." msgstr "" #: fdmprinter.def.json msgctxt "alternate_carve_order label" msgid "Alternate Mesh Removal" msgstr "" #: fdmprinter.def.json msgctxt "alternate_carve_order description" msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes." msgstr "" #: fdmprinter.def.json msgctxt "remove_empty_first_layers label" msgid "Remove Empty First Layers" msgstr "" #: fdmprinter.def.json msgctxt "remove_empty_first_layers description" msgid "Remove empty layers beneath the first printed layer if they are present. Disabling this setting can cause empty first layers if the Slicing Tolerance setting is set to Exclusive or Middle." msgstr "" #: fdmprinter.def.json msgctxt "meshfix_maximum_resolution label" msgid "Maximum Resolution" msgstr "" #: fdmprinter.def.json msgctxt "meshfix_maximum_resolution description" msgid "The minimum size of a line segment after slicing. If you increase this, the mesh will have a lower resolution. This may allow the printer to keep up with the speed it has to process g-code and will increase slice speed by removing details of the mesh that it can't process anyway." msgstr "" #: fdmprinter.def.json msgctxt "meshfix_maximum_travel_resolution label" msgid "Maximum Travel Resolution" msgstr "" #: fdmprinter.def.json msgctxt "meshfix_maximum_travel_resolution description" msgid "The minimum size of a travel line segment after slicing. If you increase this, the travel moves will have less smooth corners. This may allow the printer to keep up with the speed it has to process g-code, but it may cause model avoidance to become less accurate." msgstr "" #: fdmprinter.def.json msgctxt "meshfix_maximum_deviation label" msgid "Maximum Deviation" msgstr "" #: fdmprinter.def.json msgctxt "meshfix_maximum_deviation description" msgid "The maximum deviation allowed when reducing the resolution for the Maximum Resolution setting. If you increase this, the print will be less accurate, but the g-code will be smaller. Maximum Deviation is a limit for Maximum Resolution, so if the two conflict the Maximum Deviation will always be held true." msgstr "" #: fdmprinter.def.json msgctxt "meshfix_maximum_extrusion_area_deviation label" msgid "Maximum Extrusion Area Deviation" msgstr "" #: fdmprinter.def.json msgctxt "meshfix_maximum_extrusion_area_deviation description" msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller." msgstr "" #: fdmprinter.def.json msgctxt "blackmagic label" msgid "Special Modes" msgstr "" #: fdmprinter.def.json msgctxt "blackmagic description" msgid "Non-traditional ways to print your models." msgstr "" #: fdmprinter.def.json msgctxt "print_sequence label" msgid "Print Sequence" msgstr "" #: fdmprinter.def.json msgctxt "print_sequence description" msgid "Whether to print all models one layer at a time or to wait for one model to finish, before moving on to the next. One at a time mode is possible if a) only one extruder is enabled and b) all models are separated in such a way that the whole print head can move in between and all models are lower than the distance between the nozzle and the X/Y axes." msgstr "" #: fdmprinter.def.json msgctxt "print_sequence option all_at_once" msgid "All at Once" msgstr "" #: fdmprinter.def.json msgctxt "print_sequence option one_at_a_time" msgid "One at a Time" msgstr "" #: fdmprinter.def.json msgctxt "infill_mesh label" msgid "Infill Mesh" msgstr "" #: fdmprinter.def.json msgctxt "infill_mesh description" msgid "Use this mesh to modify the infill of other meshes with which it overlaps. Replaces infill regions of other meshes with regions for this mesh. It's suggested to only print one Wall and no Top/Bottom Skin for this mesh." msgstr "" #: fdmprinter.def.json msgctxt "infill_mesh_order label" msgid "Mesh Processing Rank" msgstr "" #: fdmprinter.def.json msgctxt "infill_mesh_order description" msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes." msgstr "" #: fdmprinter.def.json msgctxt "cutting_mesh label" msgid "Cutting Mesh" msgstr "" #: fdmprinter.def.json msgctxt "cutting_mesh description" msgid "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder." msgstr "" #: fdmprinter.def.json msgctxt "mold_enabled label" msgid "Mold" msgstr "" #: fdmprinter.def.json msgctxt "mold_enabled description" msgid "Print models as a mold, which can be cast in order to get a model which resembles the models on the build plate." msgstr "" #: fdmprinter.def.json msgctxt "mold_width label" msgid "Minimal Mold Width" msgstr "" #: fdmprinter.def.json msgctxt "mold_width description" msgid "The minimal distance between the outside of the mold and the outside of the model." msgstr "" #: fdmprinter.def.json msgctxt "mold_roof_height label" msgid "Mold Roof Height" msgstr "" #: fdmprinter.def.json msgctxt "mold_roof_height description" msgid "The height above horizontal parts in your model which to print mold." msgstr "" #: fdmprinter.def.json msgctxt "mold_angle label" msgid "Mold Angle" msgstr "" #: fdmprinter.def.json msgctxt "mold_angle description" msgid "The angle of overhang of the outer walls created for the mold. 0° will make the outer shell of the mold vertical, while 90° will make the outside of the model follow the contour of the model." msgstr "" #: fdmprinter.def.json msgctxt "support_mesh label" msgid "Support Mesh" msgstr "" #: fdmprinter.def.json msgctxt "support_mesh description" msgid "Use this mesh to specify support areas. This can be used to generate support structure." msgstr "" #: fdmprinter.def.json msgctxt "anti_overhang_mesh label" msgid "Anti Overhang Mesh" msgstr "" #: fdmprinter.def.json msgctxt "anti_overhang_mesh description" msgid "Use this mesh to specify where no part of the model should be detected as overhang. This can be used to remove unwanted support structure." msgstr "" #: fdmprinter.def.json msgctxt "magic_mesh_surface_mode label" msgid "Surface Mode" msgstr "" #: fdmprinter.def.json msgctxt "magic_mesh_surface_mode description" msgid "Treat the model as a surface only, a volume, or volumes with loose surfaces. The normal print mode only prints enclosed volumes. \"Surface\" prints a single wall tracing the mesh surface with no infill and no top/bottom skin. \"Both\" prints enclosed volumes like normal and any remaining polygons as surfaces." msgstr "" #: fdmprinter.def.json msgctxt "magic_mesh_surface_mode option normal" msgid "Normal" msgstr "" #: fdmprinter.def.json msgctxt "magic_mesh_surface_mode option surface" msgid "Surface" msgstr "" #: fdmprinter.def.json msgctxt "magic_mesh_surface_mode option both" msgid "Both" msgstr "" #: fdmprinter.def.json msgctxt "magic_spiralize label" msgid "Spiralize Outer Contour" msgstr "" #: fdmprinter.def.json msgctxt "magic_spiralize description" msgid "Spiralize smooths out the Z move of the outer edge. This will create a steady Z increase over the whole print. This feature turns a solid model into a single walled print with a solid bottom. This feature should only be enabled when each layer only contains a single part." msgstr "" #: fdmprinter.def.json msgctxt "smooth_spiralized_contours label" msgid "Smooth Spiralized Contours" msgstr "" #: fdmprinter.def.json msgctxt "smooth_spiralized_contours description" msgid "Smooth the spiralized contours to reduce the visibility of the Z seam (the Z seam should be barely visible on the print but will still be visible in the layer view). Note that smoothing will tend to blur fine surface details." msgstr "" #: fdmprinter.def.json msgctxt "relative_extrusion label" msgid "Relative Extrusion" msgstr "" #: fdmprinter.def.json msgctxt "relative_extrusion description" msgid "Use relative extrusion rather than absolute extrusion. Using relative E-steps makes for easier post-processing of the g-code. However, it's not supported by all printers and it may produce very slight deviations in the amount of deposited material compared to absolute E-steps. Irrespective of this setting, the extrusion mode will always be set to absolute before any g-code script is output." msgstr "" #: fdmprinter.def.json msgctxt "experimental label" msgid "Experimental" msgstr "" #: fdmprinter.def.json msgctxt "experimental description" msgid "Features that haven't completely been fleshed out yet." msgstr "" #: fdmprinter.def.json msgctxt "slicing_tolerance label" msgid "Slicing Tolerance" msgstr "" #: fdmprinter.def.json msgctxt "slicing_tolerance description" msgid "Vertical tolerance in the sliced layers. The contours of a layer are normally generated by taking cross sections through the middle of each layer's thickness (Middle). Alternatively each layer can have the areas which fall inside of the volume throughout the entire thickness of the layer (Exclusive) or a layer has the areas which fall inside anywhere within the layer (Inclusive). Inclusive retains the most details, Exclusive makes for the best fit and Middle stays closest to the original surface." msgstr "" #: fdmprinter.def.json msgctxt "slicing_tolerance option middle" msgid "Middle" msgstr "" #: fdmprinter.def.json msgctxt "slicing_tolerance option exclusive" msgid "Exclusive" msgstr "" #: fdmprinter.def.json msgctxt "slicing_tolerance option inclusive" msgid "Inclusive" msgstr "" #: fdmprinter.def.json msgctxt "infill_enable_travel_optimization label" msgid "Infill Travel Optimization" msgstr "" #: fdmprinter.def.json msgctxt "infill_enable_travel_optimization description" msgid "When enabled, the order in which the infill lines are printed is optimized to reduce the distance travelled. The reduction in travel time achieved very much depends on the model being sliced, infill pattern, density, etc. Note that, for some models that have many small areas of infill, the time to slice the model may be greatly increased." msgstr "" #: fdmprinter.def.json msgctxt "material_flow_temp_graph label" msgid "Flow Temperature Graph" msgstr "" #: fdmprinter.def.json msgctxt "material_flow_temp_graph description" msgid "Data linking material flow (in mm3 per second) to temperature (degrees Celsius)." msgstr "" #: fdmprinter.def.json msgctxt "minimum_polygon_circumference label" msgid "Minimum Polygon Circumference" msgstr "" #: fdmprinter.def.json msgctxt "minimum_polygon_circumference description" msgid "Polygons in sliced layers that have a circumference smaller than this amount will be filtered out. Lower values lead to higher resolution mesh at the cost of slicing time. It is meant mostly for high resolution SLA printers and very tiny 3D models with a lot of details." msgstr "" #: fdmprinter.def.json msgctxt "interlocking_enable label" msgid "Generate Interlocking Structure" msgstr "" #: fdmprinter.def.json msgctxt "interlocking_enable description" msgid "At the locations where models touch, generate an interlocking beam structure. This improves the adhesion between models, especially models printed in different materials." msgstr "" #: fdmprinter.def.json msgctxt "interlocking_beam_width label" msgid "Interlocking Beam Width" msgstr "" #: fdmprinter.def.json msgctxt "interlocking_beam_width description" msgid "The width of the interlocking structure beams." msgstr "" #: fdmprinter.def.json msgctxt "interlocking_orientation label" msgid "Interlocking Structure Orientation" msgstr "" #: fdmprinter.def.json msgctxt "interlocking_orientation description" msgid "The height of the beams of the interlocking structure, measured in number of layers. Less layers is stronger, but more prone to defects." msgstr "" #: fdmprinter.def.json msgctxt "interlocking_beam_layer_count label" msgid "Interlocking Beam Layer Count" msgstr "" #: fdmprinter.def.json msgctxt "interlocking_beam_layer_count description" msgid "The height of the beams of the interlocking structure, measured in number of layers. Less layers is stronger, but more prone to defects." msgstr "" #: fdmprinter.def.json msgctxt "interlocking_depth label" msgid "Interlocking Depth" msgstr "" #: fdmprinter.def.json msgctxt "interlocking_depth description" msgid "The distance from the boundary between models to generate interlocking structure, measured in cells. Too few cells will result in poor adhesion." msgstr "" #: fdmprinter.def.json msgctxt "interlocking_boundary_avoidance label" msgid "Interlocking Boundary Avoidance" msgstr "" #: fdmprinter.def.json msgctxt "interlocking_boundary_avoidance description" msgid "The distance from the outside of a model where interlocking structures will not be generated, measured in cells." msgstr "" #: fdmprinter.def.json msgctxt "support_skip_some_zags label" msgid "Break Up Support In Chunks" msgstr "" #: fdmprinter.def.json msgctxt "support_skip_some_zags description" msgid "Skip some support line connections to make the support structure easier to break away. This setting is applicable to the Zig Zag support infill pattern." msgstr "" #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm label" msgid "Support Chunk Size" msgstr "" #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm description" msgid "Leave out a connection between support lines once every N millimeter to make the support structure easier to break away." msgstr "" #: fdmprinter.def.json msgctxt "support_zag_skip_count label" msgid "Support Chunk Line Count" msgstr "" #: fdmprinter.def.json msgctxt "support_zag_skip_count description" msgid "Skip one in every N connection lines to make the support structure easier to break away." msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_enabled label" msgid "Enable Draft Shield" msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_enabled description" msgid "This will create a wall around the model, which traps (hot) air and shields against exterior airflow. Especially useful for materials which warp easily." msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_dist label" msgid "Draft Shield X/Y Distance" msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_dist description" msgid "Distance of the draft shield from the print, in the X/Y directions." msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_height_limitation label" msgid "Draft Shield Limitation" msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_height_limitation description" msgid "Set the height of the draft shield. Choose to print the draft shield at the full height of the model or at a limited height." msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_height_limitation option full" msgid "Full" msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_height_limitation option limited" msgid "Limited" msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_height label" msgid "Draft Shield Height" msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_height description" msgid "Height limitation of the draft shield. Above this height no draft shield will be printed." msgstr "" #: fdmprinter.def.json msgctxt "conical_overhang_enabled label" msgid "Make Overhang Printable" msgstr "" #: fdmprinter.def.json msgctxt "conical_overhang_enabled description" msgid "Change the geometry of the printed model such that minimal support is required. Steep overhangs will become shallow overhangs. Overhanging areas will drop down to become more vertical." msgstr "" #: fdmprinter.def.json msgctxt "conical_overhang_angle label" msgid "Maximum Model Angle" msgstr "" #: fdmprinter.def.json msgctxt "conical_overhang_angle description" msgid "The maximum angle of overhangs after the they have been made printable. At a value of 0° all overhangs are replaced by a piece of model connected to the build plate, 90° will not change the model in any way." msgstr "" #: fdmprinter.def.json msgctxt "conical_overhang_hole_size label" msgid "Maximum Overhang Hole Area" msgstr "" #: fdmprinter.def.json msgctxt "conical_overhang_hole_size description" msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable. Holes smaller than this will be retained. A value of 0 mm² will fill all holes in the models base." msgstr "" #: fdmprinter.def.json msgctxt "coasting_enable label" msgid "Enable Coasting" msgstr "" #: fdmprinter.def.json msgctxt "coasting_enable description" msgid "Coasting replaces the last part of an extrusion path with a travel path. The oozed material is used to print the last piece of the extrusion path in order to reduce stringing." msgstr "" #: fdmprinter.def.json msgctxt "coasting_volume label" msgid "Coasting Volume" msgstr "" #: fdmprinter.def.json msgctxt "coasting_volume description" msgid "The volume otherwise oozed. This value should generally be close to the nozzle diameter cubed." msgstr "" #: fdmprinter.def.json msgctxt "coasting_min_volume label" msgid "Minimum Volume Before Coasting" msgstr "" #: fdmprinter.def.json msgctxt "coasting_min_volume description" msgid "The smallest volume an extrusion path should have before allowing coasting. For smaller extrusion paths, less pressure has been built up in the bowden tube and so the coasted volume is scaled linearly. This value should always be larger than the Coasting Volume." msgstr "" #: fdmprinter.def.json msgctxt "coasting_speed label" msgid "Coasting Speed" msgstr "" #: fdmprinter.def.json msgctxt "coasting_speed description" msgid "The speed by which to move during coasting, relative to the speed of the extrusion path. A value slightly under 100% is advised, since during the coasting move the pressure in the bowden tube drops." msgstr "" #: fdmprinter.def.json msgctxt "cross_infill_pocket_size label" msgid "Cross 3D Pocket Size" msgstr "" #: fdmprinter.def.json msgctxt "cross_infill_pocket_size description" msgid "The size of pockets at four-way crossings in the cross 3D pattern at heights where the pattern is touching itself." msgstr "" #: fdmprinter.def.json msgctxt "cross_infill_density_image label" msgid "Cross Infill Density Image" msgstr "" #: fdmprinter.def.json msgctxt "cross_infill_density_image description" msgid "The file location of an image of which the brightness values determine the minimal density at the corresponding location in the infill of the print." msgstr "" #: fdmprinter.def.json msgctxt "cross_support_density_image label" msgid "Cross Fill Density Image for Support" msgstr "" #: fdmprinter.def.json msgctxt "cross_support_density_image description" msgid "The file location of an image of which the brightness values determine the minimal density at the corresponding location in the support." msgstr "" #: fdmprinter.def.json msgctxt "support_conical_enabled label" msgid "Enable Conical Support" msgstr "" #: fdmprinter.def.json msgctxt "support_conical_enabled description" msgid "Make support areas smaller at the bottom than at the overhang." msgstr "" #: fdmprinter.def.json msgctxt "support_conical_angle label" msgid "Conical Support Angle" msgstr "" #: fdmprinter.def.json msgctxt "support_conical_angle description" msgid "The angle of the tilt of conical support. With 0 degrees being vertical, and 90 degrees being horizontal. Smaller angles cause the support to be more sturdy, but consist of more material. Negative angles cause the base of the support to be wider than the top." msgstr "" #: fdmprinter.def.json msgctxt "support_conical_min_width label" msgid "Conical Support Minimum Width" msgstr "" #: fdmprinter.def.json msgctxt "support_conical_min_width description" msgid "Minimum width to which the base of the conical support area is reduced. Small widths can lead to unstable support structures." msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_enabled label" msgid "Fuzzy Skin" msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_enabled description" msgid "Randomly jitter while printing the outer wall, so that the surface has a rough and fuzzy look." msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_outside_only label" msgid "Fuzzy Skin Outside Only" msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_outside_only description" msgid "Jitter only the parts' outlines and not the parts' holes." msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_thickness label" msgid "Fuzzy Skin Thickness" msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_thickness description" msgid "The width within which to jitter. It's advised to keep this below the outer wall width, since the inner walls are unaltered." msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_point_density label" msgid "Fuzzy Skin Density" msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_point_density description" msgid "The average density of points introduced on each polygon in a layer. Note that the original points of the polygon are discarded, so a low density results in a reduction of the resolution." msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_point_dist label" msgid "Fuzzy Skin Point Distance" msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_point_dist description" msgid "The average distance between the random points introduced on each line segment. Note that the original points of the polygon are discarded, so a high smoothness results in a reduction of the resolution. This value must be higher than half the Fuzzy Skin Thickness." msgstr "" #: fdmprinter.def.json msgctxt "flow_rate_max_extrusion_offset label" msgid "Flow Rate Compensation Max Extrusion Offset" msgstr "" #: fdmprinter.def.json msgctxt "flow_rate_max_extrusion_offset description" msgid "The maximum distance in mm to move the filament to compensate for changes in flow rate." msgstr "" #: fdmprinter.def.json msgctxt "flow_rate_extrusion_offset_factor label" msgid "Flow Rate Compensation Factor" msgstr "" #: fdmprinter.def.json msgctxt "flow_rate_extrusion_offset_factor description" msgid "How far to move the filament in order to compensate for changes in flow rate, as a percentage of how far the filament would move in one second of extrusion." msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_enabled label" msgid "Use Adaptive Layers" msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_enabled description" msgid "Adaptive layers computes the layer heights depending on the shape of the model." msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_variation label" msgid "Adaptive Layers Maximum Variation" msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_variation description" msgid "The maximum allowed height different from the base layer height." msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_variation_step label" msgid "Adaptive Layers Variation Step Size" msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_variation_step description" msgid "The difference in height of the next layer height compared to the previous one." msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_threshold label" msgid "Adaptive Layers Topography Size" msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_threshold description" msgid "Target horizontal distance between two adjacent layers. Reducing this setting causes thinner layers to be used to bring the edges of the layers closer together." msgstr "" #: fdmprinter.def.json msgctxt "wall_overhang_angle label" msgid "Overhanging Wall Angle" msgstr "" #: fdmprinter.def.json msgctxt "wall_overhang_angle description" msgid "Walls that overhang more than this angle will be printed using overhanging wall settings. When the value is 90, no walls will be treated as overhanging. Overhang that gets supported by support will not be treated as overhang either." msgstr "" #: fdmprinter.def.json msgctxt "wall_overhang_speed_factor label" msgid "Overhanging Wall Speed" msgstr "" #: fdmprinter.def.json msgctxt "wall_overhang_speed_factor description" msgid "Overhanging walls will be printed at this percentage of their normal print speed." msgstr "" #: fdmprinter.def.json msgctxt "bridge_settings_enabled label" msgid "Enable Bridge Settings" msgstr "" #: fdmprinter.def.json msgctxt "bridge_settings_enabled description" msgid "Detect bridges and modify print speed, flow and fan settings while bridges are printed." msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_min_length label" msgid "Minimum Bridge Wall Length" msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_min_length description" msgid "Unsupported walls shorter than this will be printed using the normal wall settings. Longer unsupported walls will be printed using the bridge wall settings." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_support_threshold label" msgid "Bridge Skin Support Threshold" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_support_threshold description" msgid "If a skin region is supported for less than this percentage of its area, print it using the bridge settings. Otherwise it is printed using the normal skin settings." msgstr "" #: fdmprinter.def.json msgctxt "bridge_sparse_infill_max_density label" msgid "Bridge Sparse Infill Max Density" msgstr "" #: fdmprinter.def.json msgctxt "bridge_sparse_infill_max_density description" msgid "Maximum density of infill considered to be sparse. Skin over sparse infill is considered to be unsupported and so may be treated as a bridge skin." msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_coast label" msgid "Bridge Wall Coasting" msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_coast description" msgid "This controls the distance the extruder should coast immediately before a bridge wall begins. Coasting before the bridge starts can reduce the pressure in the nozzle and may produce a flatter bridge." msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_speed label" msgid "Bridge Wall Speed" msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_speed description" msgid "The speed at which the bridge walls are printed." msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_material_flow label" msgid "Bridge Wall Flow" msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_material_flow description" msgid "When printing bridge walls, the amount of material extruded is multiplied by this value." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_speed label" msgid "Bridge Skin Speed" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_speed description" msgid "The speed at which bridge skin regions are printed." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_material_flow label" msgid "Bridge Skin Flow" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_material_flow description" msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_density label" msgid "Bridge Skin Density" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_density description" msgid "The density of the bridge skin layer. Values less than 100 will increase the gaps between the skin lines." msgstr "" #: fdmprinter.def.json msgctxt "bridge_fan_speed label" msgid "Bridge Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "bridge_fan_speed description" msgid "Percentage fan speed to use when printing bridge walls and skin." msgstr "" #: fdmprinter.def.json msgctxt "bridge_enable_more_layers label" msgid "Bridge Has Multiple Layers" msgstr "" #: fdmprinter.def.json msgctxt "bridge_enable_more_layers description" msgid "If enabled, the second and third layers above the air are printed using the following settings. Otherwise, those layers are printed using the normal settings." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_speed_2 label" msgid "Bridge Second Skin Speed" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_speed_2 description" msgid "Print speed to use when printing the second bridge skin layer." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_material_flow_2 label" msgid "Bridge Second Skin Flow" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_material_flow_2 description" msgid "When printing the second bridge skin layer, the amount of material extruded is multiplied by this value." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_density_2 label" msgid "Bridge Second Skin Density" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_density_2 description" msgid "The density of the second bridge skin layer. Values less than 100 will increase the gaps between the skin lines." msgstr "" #: fdmprinter.def.json msgctxt "bridge_fan_speed_2 label" msgid "Bridge Second Skin Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "bridge_fan_speed_2 description" msgid "Percentage fan speed to use when printing the second bridge skin layer." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_speed_3 label" msgid "Bridge Third Skin Speed" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_speed_3 description" msgid "Print speed to use when printing the third bridge skin layer." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_material_flow_3 label" msgid "Bridge Third Skin Flow" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_material_flow_3 description" msgid "When printing the third bridge skin layer, the amount of material extruded is multiplied by this value." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_density_3 label" msgid "Bridge Third Skin Density" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_density_3 description" msgid "The density of the third bridge skin layer. Values less than 100 will increase the gaps between the skin lines." msgstr "" #: fdmprinter.def.json msgctxt "bridge_fan_speed_3 label" msgid "Bridge Third Skin Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "bridge_fan_speed_3 description" msgid "Percentage fan speed to use when printing the third bridge skin layer." msgstr "" #: fdmprinter.def.json msgctxt "clean_between_layers label" msgid "Wipe Nozzle Between Layers" msgstr "" #: fdmprinter.def.json msgctxt "clean_between_layers description" msgid "Whether to include nozzle wipe G-Code between layers (maximum 1 per layer). Enabling this setting could influence behavior of retract at layer change. Please use Wipe Retraction settings to control retraction at layers where the wipe script will be working." msgstr "" #: fdmprinter.def.json msgctxt "max_extrusion_before_wipe label" msgid "Material Volume Between Wipes" msgstr "" #: fdmprinter.def.json msgctxt "max_extrusion_before_wipe description" msgid "Maximum material that can be extruded before another nozzle wipe is initiated. If this value is less than the volume of material required in a layer, the setting has no effect in this layer, i.e. it is limited to one wipe per layer." msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_enable label" msgid "Wipe Retraction Enable" msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_enable description" msgid "Retract the filament when the nozzle is moving over a non-printed area." msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_amount label" msgid "Wipe Retraction Distance" msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_amount description" msgid "Amount to retract the filament so it does not ooze during the wipe sequence." msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_extra_prime_amount label" msgid "Wipe Retraction Extra Prime Amount" msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_extra_prime_amount description" msgid "Some material can ooze away during a wipe travel moves, which can be compensated for here." msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_speed label" msgid "Wipe Retraction Speed" msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_speed description" msgid "The speed at which the filament is retracted and primed during a wipe retraction move." msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_retract_speed label" msgid "Wipe Retraction Retract Speed" msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_retract_speed description" msgid "The speed at which the filament is retracted during a wipe retraction move." msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_prime_speed label" msgid "Wipe Retraction Prime Speed" msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_prime_speed description" msgid "The speed at which the filament is primed during a wipe retraction move." msgstr "" #: fdmprinter.def.json msgctxt "wipe_pause label" msgid "Wipe Pause" msgstr "" #: fdmprinter.def.json msgctxt "wipe_pause description" msgid "Pause after the unretract." msgstr "" #: fdmprinter.def.json msgctxt "wipe_hop_enable label" msgid "Wipe Z Hop" msgstr "" #: fdmprinter.def.json msgctxt "wipe_hop_enable description" msgid "When wiping, the build plate is lowered to create clearance between the nozzle and the print. It prevents the nozzle from hitting the print during travel moves, reducing the chance to knock the print from the build plate." msgstr "" #: fdmprinter.def.json msgctxt "wipe_hop_amount label" msgid "Wipe Z Hop Height" msgstr "" #: fdmprinter.def.json msgctxt "wipe_hop_amount description" msgid "The height difference when performing a Z Hop." msgstr "" #: fdmprinter.def.json msgctxt "wipe_hop_speed label" msgid "Wipe Hop Speed" msgstr "" #: fdmprinter.def.json msgctxt "wipe_hop_speed description" msgid "Speed to move the z-axis during the hop." msgstr "" #: fdmprinter.def.json msgctxt "wipe_brush_pos_x label" msgid "Wipe Brush X Position" msgstr "" #: fdmprinter.def.json msgctxt "wipe_brush_pos_x description" msgid "X location where wipe script will start." msgstr "" #: fdmprinter.def.json msgctxt "wipe_repeat_count label" msgid "Wipe Repeat Count" msgstr "" #: fdmprinter.def.json msgctxt "wipe_repeat_count description" msgid "Number of times to move the nozzle across the brush." msgstr "" #: fdmprinter.def.json msgctxt "wipe_move_distance label" msgid "Wipe Move Distance" msgstr "" #: fdmprinter.def.json msgctxt "wipe_move_distance description" msgid "The distance to move the head back and forth across the brush." msgstr "" #: fdmprinter.def.json msgctxt "small_hole_max_size label" msgid "Small Hole Max Size" msgstr "" #: fdmprinter.def.json msgctxt "small_hole_max_size description" msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed." msgstr "" #: fdmprinter.def.json msgctxt "small_feature_max_length label" msgid "Small Feature Max Length" msgstr "" #: fdmprinter.def.json msgctxt "small_feature_max_length description" msgid "Feature outlines that are shorter than this length will be printed using Small Feature Speed." msgstr "" #: fdmprinter.def.json msgctxt "small_feature_speed_factor label" msgid "Small Feature Speed" msgstr "" #: fdmprinter.def.json msgctxt "small_feature_speed_factor description" msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy." msgstr "" #: fdmprinter.def.json msgctxt "small_feature_speed_factor_0 label" msgid "Small Feature Initial Layer Speed" msgstr "" #: fdmprinter.def.json msgctxt "small_feature_speed_factor_0 description" msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy." msgstr "" #: fdmprinter.def.json msgctxt "material_alternate_walls label" msgid "Alternate Wall Directions" msgstr "" #: fdmprinter.def.json msgctxt "material_alternate_walls description" msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing." msgstr "" #: fdmprinter.def.json msgctxt "raft_remove_inside_corners label" msgid "Remove Raft Inside Corners" msgstr "" #: fdmprinter.def.json msgctxt "raft_remove_inside_corners description" msgid "Remove inside corners from the raft, causing the raft to become convex." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_wall_count label" msgid "Raft Base Wall Count" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_wall_count description" msgid "The number of contours to print around the linear pattern in the base layer of the raft." msgstr "" #: fdmprinter.def.json msgctxt "command_line_settings label" msgid "Command Line Settings" msgstr "" #: fdmprinter.def.json msgctxt "command_line_settings description" msgid "Settings which are only used if CuraEngine isn't called from the Cura frontend." msgstr "" #: fdmprinter.def.json msgctxt "center_object label" msgid "Center Object" msgstr "" #: fdmprinter.def.json msgctxt "center_object description" msgid "Whether to center the object on the middle of the build platform (0,0), instead of using the coordinate system in which the object was saved." msgstr "" #: fdmprinter.def.json msgctxt "mesh_position_x label" msgid "Mesh Position X" msgstr "" #: fdmprinter.def.json msgctxt "mesh_position_x description" msgid "Offset applied to the object in the x direction." msgstr "" #: fdmprinter.def.json msgctxt "mesh_position_y label" msgid "Mesh Position Y" msgstr "" #: fdmprinter.def.json msgctxt "mesh_position_y description" msgid "Offset applied to the object in the y direction." msgstr "" #: fdmprinter.def.json msgctxt "mesh_position_z label" msgid "Mesh Position Z" msgstr "" #: fdmprinter.def.json msgctxt "mesh_position_z description" msgid "Offset applied to the object in the z direction. With this you can perform what was used to be called 'Object Sink'." msgstr "" #: fdmprinter.def.json msgctxt "mesh_rotation_matrix label" msgid "Mesh Rotation Matrix" msgstr "" #: fdmprinter.def.json msgctxt "mesh_rotation_matrix description" msgid "Transformation matrix to be applied to the model when loading it from file." msgstr ""