# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
"POT-Creation-Date: 2021-10-20 16:43+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1615
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
msgctxt "@label"
msgid "Unknown"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
msgctxt "@label"
msgid ""
"The printer(s) below cannot be connected because they are part of a group"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
msgctxt "@label"
msgid "Available networked printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:219
msgctxt "@menuitem"
msgid "Not overridden"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
#, python-brace-format
msgctxt "@label {0} is the name of a printer that's about to be deleted."
msgid "Are you sure you wish to remove {0}? This cannot be undone!"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
msgctxt "@label"
msgid "Default"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
msgctxt "@label"
msgid "Visual"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
msgctxt "@text"
msgid ""
"The visual profile is designed to print visual prototypes and models with "
"the intent of high visual and surface quality."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
msgctxt "@label"
msgid "Engineering"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
msgctxt "@text"
msgid ""
"The engineering profile is designed to print functional prototypes and end-"
"use parts with the intent of better accuracy and for closer tolerances."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
msgctxt "@label"
msgid "Draft"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
msgctxt "@text"
msgid ""
"The draft profile is designed to print initial prototypes and concept "
"validation with the intent of significant print time reduction."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:53
msgctxt "@action:button"
msgid ""
"Please sync the material profiles with your printers before starting to "
"print."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:54
msgctxt "@action:button"
msgid "New materials installed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:61
msgctxt "@action:button"
msgid "Sync materials with printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:69
#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:80
msgctxt "@action:button"
msgid "Learn more"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:285
msgctxt "@label"
msgid "Custom Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:286
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:233
msgctxt "@label"
msgid "Custom"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:356
msgctxt "@message:text"
msgid "Could not save material archive to {}:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:357
msgctxt "@message:title"
msgid "Failed to save material archive"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
msgctxt "@label"
msgid "Custom profiles"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
#, python-brace-format
msgctxt "@item:inlistbox"
msgid "All Supported Types ({0})"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
msgctxt "@item:inlistbox"
msgid "All Files (*)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:186
msgctxt "@info:title"
msgid "Login failed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
msgctxt "@info:status"
msgid "Finding new location for objects"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
msgctxt "@info:title"
msgid "Finding Location"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:99
msgctxt "@info:status"
msgid "Unable to find a location within the build volume for all objects"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
msgctxt "@info:title"
msgid "Can't Find Location"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:115
msgctxt "@info:backup_failed"
msgid "Could not create archive from user data directory: {}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:122
#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:159
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
msgctxt "@info:title"
msgid "Backup"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
msgctxt "@info:backup_failed"
msgid "Tried to restore a Cura backup without having proper data or meta data."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:145
msgctxt "@info:backup_failed"
msgid "Tried to restore a Cura backup that is higher than the current version."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:158
msgctxt "@info:backup_failed"
msgid "The following error occurred while trying to restore a Cura backup:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
msgctxt "@info:status"
msgid ""
"The build volume height has been reduced due to the value of the \"Print "
"Sequence\" setting to prevent the gantry from colliding with printed models."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:101
msgctxt "@info:title"
msgid "Build Volume"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
msgctxt "@title:window"
msgid "Cura can't start"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
msgctxt "@label crash message"
msgid ""
"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right."
"</p></b>\n"
"                    <p>We encountered an unrecoverable error during start "
"up. It was possibly caused by some incorrect configuration files. We suggest "
"to backup and reset your configuration.</p>\n"
"                    <p>Backups can be found in the configuration folder.</"
"p>\n"
"                    <p>Please send us this Crash Report to fix the problem.</"
"p>\n"
"                "
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
msgctxt "@action:button"
msgid "Send crash report to Ultimaker"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
msgctxt "@action:button"
msgid "Show detailed crash report"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
msgctxt "@action:button"
msgid "Show configuration folder"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
msgctxt "@action:button"
msgid "Backup and Reset Configuration"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
msgctxt "@title:window"
msgid "Crash Report"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
msgctxt "@label crash message"
msgid ""
"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report "
"to fix the problem</p></b>\n"
"            <p>Please use the \"Send report\" button to post a bug report "
"automatically to our servers</p>\n"
"        "
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
msgctxt "@title:groupbox"
msgid "System information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
msgctxt "@label unknown version of Cura"
msgid "Unknown"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
msgctxt "@label Cura version number"
msgid "Cura version"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
msgctxt "@label"
msgid "Cura language"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
msgctxt "@label"
msgid "OS language"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
msgctxt "@label Type of platform"
msgid "Platform"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
msgctxt "@label"
msgid "Qt version"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
msgctxt "@label"
msgid "PyQt version"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
msgctxt "@label OpenGL version"
msgid "OpenGL"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
msgctxt "@label"
msgid "Not yet initialized<br/>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
#, python-brace-format
msgctxt "@label OpenGL version"
msgid "<li>OpenGL Version: {version}</li>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
#, python-brace-format
msgctxt "@label OpenGL vendor"
msgid "<li>OpenGL Vendor: {vendor}</li>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
#, python-brace-format
msgctxt "@label OpenGL renderer"
msgid "<li>OpenGL Renderer: {renderer}</li>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
msgctxt "@title:groupbox"
msgid "Error traceback"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
msgctxt "@title:groupbox"
msgid "Logs"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
msgctxt "@action:button"
msgid "Send report"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:529
msgctxt "@info:progress"
msgid "Loading machines..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:536
msgctxt "@info:progress"
msgid "Setting up preferences..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:674
msgctxt "@info:progress"
msgid "Initializing Active Machine..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:809
msgctxt "@info:progress"
msgid "Initializing machine manager..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:823
msgctxt "@info:progress"
msgid "Initializing build volume..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:894
msgctxt "@info:progress"
msgid "Setting up scene..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:930
msgctxt "@info:progress"
msgid "Loading interface..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:935
msgctxt "@info:progress"
msgid "Initializing engine..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1252
#, python-format
msgctxt ""
"@info 'width', 'depth' and 'height' are variable names that must NOT be "
"translated; just translate the format of ##x##x## mm."
msgid "%(width).1f x %(depth).1f x %(height).1f mm"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1805
#, python-brace-format
msgctxt "@info:status"
msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1807
#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:198
#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:258
#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
msgctxt "@info:title"
msgid "Warning"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1817
#, python-brace-format
msgctxt "@info:status"
msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1819
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:166
#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
msgctxt "@info:title"
msgid "Error"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:30
msgctxt "@info:status"
msgid "Multiplying and placing objects"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:32
msgctxt "@info:title"
msgid "Placing Objects"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:100
msgctxt "@info:title"
msgid "Placing Object"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:92
msgctxt "@message"
msgid "Could not read response."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
msgctxt "@message"
msgid "The provided state is not correct."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
msgctxt "@message"
msgid "Please give the required permissions when authorizing this application."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
msgctxt "@message"
msgid "Something unexpected happened when trying to log in, please try again."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:197
msgctxt "@info"
msgid ""
"Unable to start a new sign in process. Check if another sign in attempt is "
"still active."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:257
msgctxt "@info"
msgid "Unable to reach the Ultimaker account server."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:207
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:140
msgctxt "@title:window"
msgid "File Already Exists"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:208
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:141
#, python-brace-format
msgctxt "@label Don't translate the XML tag <filename>!"
msgid ""
"The file <filename>{0}</filename> already exists. Are you sure you want to "
"overwrite it?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:459
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:462
msgctxt "@info:status"
msgid "Invalid file URL:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid ""
"Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:163
#, python-brace-format
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid ""
"Failed to export profile to <filename>{0}</filename>: Writer plugin reported "
"failure."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:171
#, python-brace-format
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Exported profile to <filename>{0}</filename>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:173
msgctxt "@info:title"
msgid "Export succeeded"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:205
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "Failed to import profile from <filename>{0}</filename>: {1}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:209
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid ""
"Can't import profile from <filename>{0}</filename> before a printer is added."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:224
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "No custom profile to import in file <filename>{0}</filename>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:228
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "Failed to import profile from <filename>{0}</filename>:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:252
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:262
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid ""
"This profile <filename>{0}</filename> contains incorrect data, could not "
"import it."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:355
#, python-brace-format
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Failed to import profile from <filename>{0}</filename>:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:359
#, python-brace-format
msgctxt "@info:status"
msgid "Successfully imported profile {0}."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:366
#, python-brace-format
msgctxt "@info:status"
msgid "File {0} does not contain any valid profile."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:369
#, python-brace-format
msgctxt "@info:status"
msgid "Profile {0} has an unknown file type or is corrupted."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
msgctxt "@label"
msgid "Custom profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:459
msgctxt "@info:status"
msgid "Profile is missing a quality type."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
msgctxt "@info:status"
msgid "There is no active printer yet."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:469
msgctxt "@info:status"
msgid "Unable to add the profile."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:483
#, python-brace-format
msgctxt "@info:status"
msgid ""
"Quality type '{0}' is not compatible with the current active machine "
"definition '{1}'."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:488
#, python-brace-format
msgctxt "@info:status"
msgid ""
"Warning: The profile is not visible because its quality type '{0}' is not "
"available for the current configuration. Switch to a material/nozzle "
"combination that can use this quality type."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
msgctxt "@info:not supported profile"
msgid "Not supported"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
msgctxt "@info:No intent profile selected"
msgid "Default"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:713
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
msgctxt "@label"
msgid "Nozzle"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:857
msgctxt "@info:message Followed by a list of settings."
msgid ""
"Settings have been changed to match the current availability of extruders:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:859
msgctxt "@info:title"
msgid "Settings updated"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1481
msgctxt "@info:title"
msgid "Extruder(s) Disabled"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
msgctxt "@action:button"
msgid "Add"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:272
msgctxt "@action:button"
msgid "Finish"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
msgctxt "@action:button"
msgid "Cancel"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
#, python-brace-format
msgctxt "@label"
msgid "Group #{group_nr}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
msgctxt "@tooltip"
msgid "Outer Wall"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
msgctxt "@tooltip"
msgid "Inner Walls"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
msgctxt "@tooltip"
msgid "Skin"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
msgctxt "@tooltip"
msgid "Infill"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
msgctxt "@tooltip"
msgid "Support Infill"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
msgctxt "@tooltip"
msgid "Support Interface"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
msgctxt "@tooltip"
msgid "Support"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
msgctxt "@tooltip"
msgid "Skirt"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
msgctxt "@tooltip"
msgid "Prime Tower"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
msgctxt "@tooltip"
msgid "Travel"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:95
msgctxt "@tooltip"
msgid "Retractions"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:96
msgctxt "@tooltip"
msgid "Other"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:37
#: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:61
msgctxt "@text:window"
msgid "The release notes could not be opened."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:259
msgctxt "@action:button"
msgid "Next"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:268
#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:55
msgctxt "@action:button"
msgid "Skip"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:60
#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:174
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
msgctxt "@action:button"
msgid "Close"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
msgctxt "@info:title"
msgid "3D Model Assistant"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:97
#, python-brace-format
msgctxt "@info:status"
msgid ""
"<p>One or more 3D models may not print optimally due to the model size and "
"material configuration:</p>\n"
"<p>{model_names}</p>\n"
"<p>Find out how to ensure the best possible print quality and reliability.</"
"p>\n"
"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality "
"guide</a></p>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:540
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid ""
"Project file <filename>{0}</filename> contains an unknown machine type "
"<message>{1}</message>. Cannot import the machine. Models will be imported "
"instead."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:543
msgctxt "@info:title"
msgid "Open Project File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:640
#, python-brace-format
msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
msgid ""
"Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}"
"</message>."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:649
msgctxt "@info:title"
msgid "Can't Open Project File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:648
#, python-brace-format
msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
msgid ""
"Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:701
#, python-brace-format
msgctxt "@info:error Don't translate the XML tag <filename>!"
msgid ""
"Project file <filename>{0}</filename> is made using profiles that are "
"unknown to this version of Ultimaker Cura."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
msgctxt "@title:tab"
msgid "Recommended"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
msgctxt "@title:tab"
msgid "Custom"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
msgctxt "@item:inlistbox"
msgid "3MF File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
msgctxt "@error:zip"
msgid "3MF Writer plug-in is corrupt."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
msgctxt "@error:zip"
msgid "No permission to write the workspace here."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
msgctxt "@error:zip"
msgid ""
"The operating system does not allow saving a project file to this location "
"or with this file name."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
msgctxt "@error:zip"
msgid "Error writing 3mf file."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
msgctxt "@item:inlistbox"
msgid "3MF file"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
msgctxt "@item:inlistbox"
msgid "Cura Project 3MF file"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
msgctxt "@item:inlistbox"
msgid "AMF File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
msgctxt "@info:title"
msgid "Backups"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
msgctxt "@info:backup_status"
msgid "There was an error while uploading your backup."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
msgctxt "@info:backup_status"
msgid "Creating your backup..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
msgctxt "@info:backup_status"
msgid "There was an error while creating your backup."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
msgctxt "@info:backup_status"
msgid "Uploading your backup..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
msgctxt "@info:backup_status"
msgid "Your backup has finished uploading."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
msgctxt "@error:file_size"
msgid "The backup exceeds the maximum file size."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:86
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
msgctxt "@info:backup_status"
msgid "There was an error trying to restore your backup."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
msgctxt "@item:inmenu"
msgid "Manage backups"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
msgctxt "@message"
msgid ""
"Slicing failed with an unexpected error. Please consider reporting a bug on "
"our issue tracker."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
msgctxt "@message:title"
msgid "Slicing failed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
msgctxt "@message:button"
msgid "Report a bug"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
msgctxt "@message:description"
msgid "Report a bug on Ultimaker Cura's issue tracker."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
msgctxt "@info:status"
msgid ""
"Unable to slice with the current material as it is incompatible with the "
"selected machine or configuration."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
msgctxt "@info:title"
msgid "Unable to slice"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
#, python-brace-format
msgctxt "@info:status"
msgid ""
"Unable to slice with the current settings. The following settings have "
"errors: {0}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
#, python-brace-format
msgctxt "@info:status"
msgid ""
"Unable to slice due to some per-model settings. The following settings have "
"errors on one or more models: {error_labels}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
msgctxt "@info:status"
msgid ""
"Unable to slice because the prime tower or prime position(s) are invalid."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
#, python-format
msgctxt "@info:status"
msgid ""
"Unable to slice because there are objects associated with disabled Extruder "
"%s."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
msgctxt "@info:status"
msgid ""
"Please review settings and check if your models:\n"
"- Fit within the build volume\n"
"- Are assigned to an enabled extruder\n"
"- Are not all set as modifier meshes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
msgctxt "@info:status"
msgid "Processing Layers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
msgctxt "@info:title"
msgid "Information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
msgctxt "@item:inlistbox"
msgid "Cura Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
msgctxt "@info"
msgid "Could not access update information."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
#, python-brace-format
msgctxt ""
"@info Don't translate {machine_name}, since it gets replaced by a printer "
"name!"
msgid ""
"New features or bug-fixes may be available for your {machine_name}! If you "
"haven't done so already, it is recommended to update the firmware on your "
"printer to version {latest_version}."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
#, python-format
msgctxt "@info:title The %s gets replaced with the printer name."
msgid "New %s stable firmware available"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
msgctxt "@action:button"
msgid "How to update"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
msgctxt "@action"
msgid "Update Firmware"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
msgctxt "@item:inlistbox"
msgid "Compressed G-code File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
msgctxt "@error:not supported"
msgid "GCodeGzWriter does not support text mode."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
msgctxt "@item:inlistbox"
msgid "G-code File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
msgctxt "@info:status"
msgid "Parsing G-code"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
msgctxt "@info:title"
msgid "G-code Details"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
msgctxt "@info:generic"
msgid ""
"Make sure the g-code is suitable for your printer and printer configuration "
"before sending the file to it. The g-code representation may not be accurate."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
msgctxt "@item:inlistbox"
msgid "G File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
msgctxt "@error:not supported"
msgid "GCodeWriter does not support non-text mode."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
msgctxt "@warning:status"
msgid "Please prepare G-code before exporting."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
msgctxt "@item:inlistbox"
msgid "JPG Image"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
msgctxt "@item:inlistbox"
msgid "JPEG Image"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
msgctxt "@item:inlistbox"
msgid "PNG Image"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
msgctxt "@item:inlistbox"
msgid "BMP Image"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
msgctxt "@item:inlistbox"
msgid "GIF Image"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
msgctxt "@item:inlistbox"
msgid "Cura 15.04 profiles"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
msgctxt "@action"
msgid "Machine Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
msgctxt "@item:inmenu"
msgid "Monitor"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
msgctxt "@label"
msgid "Per Model Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
msgctxt "@info:tooltip"
msgid "Configure Per Model Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
msgctxt "@item:inmenu"
msgid "Post Processing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
msgctxt "@item:inmenu"
msgid "Modify G-Code"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
msgctxt "@item:inmenu"
msgid "Prepare"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
msgctxt "@item:inmenu"
msgid "Preview"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
msgctxt "@action:button Preceded by 'Ready to'."
msgid "Save to Removable Drive"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
#, python-brace-format
msgctxt "@item:inlistbox"
msgid "Save to Removable Drive {0}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
msgctxt "@info:status"
msgid "There are no file formats available to write with!"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
#, python-brace-format
msgctxt "@info:progress Don't translate the XML tags <filename>!"
msgid "Saving to Removable Drive <filename>{0}</filename>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
msgctxt "@info:title"
msgid "Saving"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
#, python-brace-format
msgctxt "@info:status Don't translate the tag {device}!"
msgid "Could not find a file name when trying to write to {device}."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
#, python-brace-format
msgctxt "@info:status"
msgid "Could not save to removable drive {0}: {1}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
#, python-brace-format
msgctxt "@info:status"
msgid "Saved to Removable Drive {0} as {1}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
msgctxt "@info:title"
msgid "File Saved"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
msgctxt "@action:button"
msgid "Eject"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
#, python-brace-format
msgctxt "@action"
msgid "Eject removable device {0}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
#, python-brace-format
msgctxt "@info:status"
msgid "Ejected {0}. You can now safely remove the drive."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
msgctxt "@info:title"
msgid "Safely Remove Hardware"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
#, python-brace-format
msgctxt "@info:status"
msgid "Failed to eject {0}. Another program may be using the drive."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
msgctxt "@item:intext"
msgid "Removable Drive"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:129
msgctxt "@info:status"
msgid "Cura does not accurately display layers when Wire Printing is enabled."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:130
msgctxt "@info:title"
msgid "Simulation View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:133
msgctxt "@info:status"
msgid "Nothing is shown because you need to slice first."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:134
msgctxt "@info:title"
msgid "No layers to show"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:136
#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:74
msgctxt "@info:option_text"
msgid "Do not show this message again"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
msgctxt "@item:inlistbox"
msgid "Layer view"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
msgctxt "@text"
msgid "Unable to read example data file."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:71
msgctxt "@info:status"
msgid ""
"The highlighted areas indicate either missing or extraneous surfaces. Fix "
"your model and open it again into Cura."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
msgctxt "@info:title"
msgid "Model Errors"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
msgctxt "@item:inmenu"
msgid "Solid view"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
msgctxt "@label"
msgid "Support Blocker"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
msgctxt "@info:tooltip"
msgid "Create a volume in which supports are not printed."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
msgctxt "@info:generic"
msgid "Do you want to sync material and software packages with your account?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95
msgctxt "@info:title"
msgid "Changes detected from your Ultimaker account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
msgctxt "@action:button"
msgid "Sync"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
msgctxt "@info:generic"
msgid "Syncing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
msgctxt "@button"
msgid "Decline"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
msgctxt "@button"
msgid "Agree"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
msgctxt "@title:window"
msgid "Plugin License Agreement"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
msgctxt "@button"
msgid "Decline and remove from account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
msgctxt "@info:generic"
msgid "You need to quit and restart {} before changes have effect."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
msgctxt "@info:generic"
msgid "{} plugins failed to download"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
msgid "Open Compressed Triangle Mesh"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
msgctxt "@item:inlistbox"
msgid "COLLADA Digital Asset Exchange"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
msgctxt "@item:inlistbox"
msgid "glTF Binary"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
msgctxt "@item:inlistbox"
msgid "glTF Embedded JSON"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
msgctxt "@item:inlistbox"
msgid "Stanford Triangle Format"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
msgctxt "@item:inlistbox"
msgid "Compressed COLLADA Digital Asset Exchange"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
msgctxt "@item:inlistbox"
msgid "Ultimaker Format Package"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:57
#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:72
#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:94
#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:149
#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:159
msgctxt "@info:error"
msgid "Can't write to UFP file:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
msgctxt "@action"
msgid "Level build plate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
msgctxt "@action"
msgid "Select upgrades"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
msgctxt "@action:button"
msgid "Print via cloud"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
msgctxt "@properties:tooltip"
msgid "Print via cloud"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
msgctxt "@info:status"
msgid "Connected via cloud"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
msgctxt "@action:button"
msgid "Monitor print"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
msgctxt "@action:tooltip"
msgid "Track the print in Ultimaker Digital Factory"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
#, python-brace-format
msgctxt "@error:send"
msgid "Unknown error code when uploading print job: {0}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:222
msgctxt "info:status"
msgid "New printer detected from your Ultimaker account"
msgid_plural "New printers detected from your Ultimaker account"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:233
#, python-brace-format
msgctxt "info:status Filled in with printer name and printer model."
msgid "Adding printer {name} ({model}) from your account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:250
#, python-brace-format
msgctxt "info:{0} gets replaced by a number of printers"
msgid "... and {0} other"
msgid_plural "... and {0} others"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
msgctxt "info:status"
msgid "Printers added from Digital Factory:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:311
msgctxt "info:status"
msgid "A cloud connection is not available for a printer"
msgid_plural "A cloud connection is not available for some printers"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:320
msgctxt "info:status"
msgid "This printer is not linked to the Digital Factory:"
msgid_plural "These printers are not linked to the Digital Factory:"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:325
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:415
msgctxt "info:name"
msgid "Ultimaker Digital Factory"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
#, python-brace-format
msgctxt "info:status"
msgid "To establish a connection, please visit the {website_link}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
msgctxt "@action:button"
msgid "Keep printer configurations"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:338
msgctxt "@action:button"
msgid "Remove printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:417
#, python-brace-format
msgctxt "@message {printer_name} is replaced with the name of the printer"
msgid "{printer_name} will be removed until the next account sync."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:418
#, python-brace-format
msgctxt "@message {printer_name} is replaced with the name of the printer"
msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
#, python-brace-format
msgctxt "@message {printer_name} is replaced with the name of the printer"
msgid "Are you sure you want to remove {printer_name} temporarily?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:456
msgctxt "@title:window"
msgid "Remove printers?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:459
#, python-brace-format
msgctxt "@label"
msgid ""
"You are about to remove {0} printer from Cura. This action cannot be "
"undone.\n"
"Are you sure you want to continue?"
msgid_plural ""
"You are about to remove {0} printers from Cura. This action cannot be "
"undone.\n"
"Are you sure you want to continue?"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:464
msgctxt "@label"
msgid ""
"You are about to remove all printers from Cura. This action cannot be "
"undone.\n"
"Are you sure you want to continue?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
#, python-brace-format
msgctxt "@info:status"
msgid ""
"Your printer <b>{printer_name}</b> could be connected via cloud.\n"
" Manage your print queue and monitor your prints from anywhere connecting "
"your printer to Digital Factory"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
msgctxt "@info:title"
msgid "Are you ready for cloud printing?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
msgctxt "@action"
msgid "Get started"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
msgctxt "@action"
msgid "Learn more"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
msgctxt "@info:status"
msgid ""
"You are attempting to connect to a printer that is not running Ultimaker "
"Connect. Please update the printer to the latest firmware."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
msgctxt "@info:title"
msgid "Update your printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
#, python-brace-format
msgctxt "@info:status"
msgid ""
"Cura has detected material profiles that were not yet installed on the host "
"printer of group {0}."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
msgctxt "@info:title"
msgid "Sending materials to printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
#, python-brace-format
msgctxt "@info:status"
msgid ""
"You are attempting to connect to {0} but it is not the host of a group. You "
"can visit the web page to configure it as a group host."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
msgctxt "@info:title"
msgid "Not a group host"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
msgctxt "@action"
msgid "Configure group"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
msgctxt "@info:status"
msgid "Please wait until the current job has been sent."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
msgctxt "@info:title"
msgid "Print error"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
msgctxt "@info:text"
msgid "Could not upload the data to the printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
msgctxt "@info:title"
msgid "Network error"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
msgctxt "@info:status"
msgid "Sending Print Job"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
msgctxt "@info:status"
msgid "Uploading print job to printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
msgctxt "@info:status"
msgid "Print job queue is full. The printer can't accept a new job."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
msgctxt "@info:title"
msgid "Queue Full"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
msgctxt "@info:status"
msgid "Print job was successfully sent to the printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
msgctxt "@info:title"
msgid "Data Sent"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
msgctxt "@action:button Preceded by 'Ready to'."
msgid "Print over network"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
msgctxt "@properties:tooltip"
msgid "Print over network"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
msgctxt "@info:status"
msgid "Connected over the network"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
msgctxt "@action"
msgid "Connect via Network"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
msgctxt "@info:status"
msgid "tomorrow"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
msgctxt "@info:status"
msgid "today"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
msgctxt "@item:inmenu"
msgid "USB printing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
msgctxt "@action:button Preceded by 'Ready to'."
msgid "Print via USB"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
msgctxt "@info:tooltip"
msgid "Print via USB"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
msgctxt "@info:status"
msgid "Connected via USB"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
msgctxt "@label"
msgid ""
"A USB print is in progress, closing Cura will stop this print. Are you sure?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
msgctxt "@message"
msgid ""
"A print is still in progress. Cura cannot start another print via USB until "
"the previous print has completed."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
msgctxt "@message"
msgid "Print in Progress"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
msgctxt "@item:inlistbox"
msgid "X3D File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
msgctxt "@item:inlistbox"
msgid "X-Ray view"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
msgctxt "@info:tooltip"
msgid ""
"Some things could be problematic in this print. Click to see tips for "
"adjustment."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
msgctxt "@title:window"
msgid "Open Project"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
msgctxt "@action:ComboBox Update/override existing profile"
msgid "Update existing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
msgctxt "@action:ComboBox Save settings in a new profile"
msgid "Create new"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
msgctxt "@action:title"
msgid "Summary - Cura Project"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
msgctxt "@action:label"
msgid "Printer settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
msgctxt "@info:tooltip"
msgid "How should the conflict in the machine be resolved?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
msgctxt "@action:label"
msgid "Type"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
msgctxt "@action:label"
msgid "Printer Group"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
msgctxt "@action:label"
msgid "Profile settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
msgctxt "@info:tooltip"
msgid "How should the conflict in the profile be resolved?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
msgctxt "@action:label"
msgid "Name"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
msgctxt "@action:label"
msgid "Intent"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
msgctxt "@action:label"
msgid "Not in profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
msgctxt "@action:label"
msgid "%1 override"
msgid_plural "%1 overrides"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
msgctxt "@action:label"
msgid "Derivative from"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
msgctxt "@action:label"
msgid "%1, %2 override"
msgid_plural "%1, %2 overrides"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
msgctxt "@action:label"
msgid "Material settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
msgctxt "@info:tooltip"
msgid "How should the conflict in the material be resolved?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
msgctxt "@action:label"
msgid "Setting visibility"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
msgctxt "@action:label"
msgid "Mode"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
msgctxt "@action:label"
msgid "Visible settings:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
msgctxt "@action:label"
msgid "%1 out of %2"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
msgctxt "@action:warning"
msgid "Loading a project will clear all models on the build plate."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
msgctxt "@action:button"
msgid "Open"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
msgctxt "@button"
msgid "Want more?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
msgctxt "@button"
msgid "Backup Now"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
msgctxt "@checkbox:description"
msgid "Auto Backup"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
msgctxt "@checkbox:description"
msgid "Automatically create a backup each day that Cura is started."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
msgctxt "@button"
msgid "Restore"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
msgctxt "@dialog:title"
msgid "Delete Backup"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
msgctxt "@dialog:info"
msgid "Are you sure you want to delete this backup? This cannot be undone."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
msgctxt "@dialog:title"
msgid "Restore Backup"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
msgctxt "@dialog:info"
msgid ""
"You will need to restart Cura before your backup is restored. Do you want to "
"close Cura now?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
msgctxt "@backuplist:label"
msgid "Cura Version"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
msgctxt "@backuplist:label"
msgid "Machines"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
msgctxt "@backuplist:label"
msgid "Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
msgctxt "@backuplist:label"
msgid "Profiles"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
msgctxt "@backuplist:label"
msgid "Plugins"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
msgctxt "@title:window"
msgid "Cura Backups"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
msgctxt "@title"
msgid "My Backups"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
msgctxt "@empty_state"
msgid ""
"You don't have any backups currently. Use the 'Backup Now' button to create "
"one."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
msgctxt "@backup_limit_info"
msgid ""
"During the preview phase, you'll be limited to 5 visible backups. Remove a "
"backup to see older ones."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
msgctxt "@description"
msgid "Backup and synchronize your Cura settings."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:53
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:225
msgctxt "@button"
msgid "Sign in"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
msgctxt "@title"
msgid "Update Firmware"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
msgctxt "@label"
msgid ""
"Firmware is the piece of software running directly on your 3D printer. This "
"firmware controls the step motors, regulates the temperature and ultimately "
"makes your printer work."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
msgctxt "@label"
msgid ""
"The firmware shipping with new printers works, but new versions tend to have "
"more features and improvements."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
msgctxt "@action:button"
msgid "Automatically upgrade Firmware"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
msgctxt "@action:button"
msgid "Upload custom Firmware"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
msgctxt "@label"
msgid ""
"Firmware can not be updated because there is no connection with the printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
msgctxt "@label"
msgid ""
"Firmware can not be updated because the connection with the printer does not "
"support upgrading firmware."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
msgctxt "@title:window"
msgid "Select custom firmware"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
msgctxt "@title:window"
msgid "Firmware Update"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
msgctxt "@label"
msgid "Updating firmware."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
msgctxt "@label"
msgid "Firmware update completed."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
msgctxt "@label"
msgid "Firmware update failed due to an unknown error."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
msgctxt "@label"
msgid "Firmware update failed due to an communication error."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
msgctxt "@label"
msgid "Firmware update failed due to an input/output error."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
msgctxt "@label"
msgid "Firmware update failed due to missing firmware."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
msgctxt "@title:window"
msgid "Convert Image..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
msgctxt "@info:tooltip"
msgid "The maximum distance of each pixel from \"Base.\""
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
msgctxt "@action:label"
msgid "Height (mm)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
msgctxt "@info:tooltip"
msgid "The base height from the build plate in millimeters."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
msgctxt "@action:label"
msgid "Base (mm)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
msgctxt "@info:tooltip"
msgid "The width in millimeters on the build plate."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
msgctxt "@action:label"
msgid "Width (mm)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
msgctxt "@info:tooltip"
msgid "The depth in millimeters on the build plate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
msgctxt "@action:label"
msgid "Depth (mm)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
msgctxt "@info:tooltip"
msgid ""
"For lithophanes dark pixels should correspond to thicker locations in order "
"to block more light coming through. For height maps lighter pixels signify "
"higher terrain, so lighter pixels should correspond to thicker locations in "
"the generated 3D model."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
msgctxt "@item:inlistbox"
msgid "Darker is higher"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
msgctxt "@item:inlistbox"
msgid "Lighter is higher"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
msgctxt "@info:tooltip"
msgid ""
"For lithophanes a simple logarithmic model for translucency is available. "
"For height maps the pixel values correspond to heights linearly."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
msgctxt "@item:inlistbox"
msgid "Linear"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
msgctxt "@item:inlistbox"
msgid "Translucency"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
msgctxt "@info:tooltip"
msgid ""
"The percentage of light penetrating a print with a thickness of 1 "
"millimeter. Lowering this value increases the contrast in dark regions and "
"decreases the contrast in light regions of the image."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
msgctxt "@action:label"
msgid "1mm Transmittance (%)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
msgctxt "@info:tooltip"
msgid "The amount of smoothing to apply to the image."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
msgctxt "@action:label"
msgid "Smoothing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
msgctxt "@action:button"
msgid "OK"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
msgctxt "@title:tab"
msgid "Printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
msgctxt "@title:label"
msgid "Nozzle Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
msgctxt "@label"
msgid "Nozzle size"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
msgctxt "@label"
msgid "mm"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
msgctxt "@label"
msgid "Compatible material diameter"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
msgctxt "@label"
msgid "Nozzle offset X"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
msgctxt "@label"
msgid "Nozzle offset Y"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
msgctxt "@label"
msgid "Cooling Fan Number"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
msgctxt "@title:label"
msgid "Extruder Start G-code"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
msgctxt "@title:label"
msgid "Extruder End G-code"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
msgctxt "@title:label"
msgid "Printer Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
msgctxt "@label"
msgid "X (Width)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
msgctxt "@label"
msgid "Y (Depth)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
msgctxt "@label"
msgid "Z (Height)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
msgctxt "@label"
msgid "Build plate shape"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
msgctxt "@label"
msgid "Origin at center"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
msgctxt "@label"
msgid "Heated bed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
msgctxt "@label"
msgid "Heated build volume"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
msgctxt "@label"
msgid "G-code flavor"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
msgctxt "@title:label"
msgid "Printhead Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
msgctxt "@label"
msgid "X min"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
msgctxt "@label"
msgid "Y min"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
msgctxt "@label"
msgid "X max"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
msgctxt "@label"
msgid "Y max"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
msgctxt "@label"
msgid "Gantry Height"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
msgctxt "@label"
msgid "Number of Extruders"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
msgctxt "@label"
msgid "Apply Extruder offsets to GCode"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
msgctxt "@title:label"
msgid "Start G-code"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
msgctxt "@title:label"
msgid "End G-code"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
msgctxt "@info"
msgid ""
"Please make sure your printer has a connection:\n"
"- Check if the printer is turned on.\n"
"- Check if the printer is connected to the network.\n"
"- Check if you are signed in to discover cloud-connected printers."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
msgctxt "@info"
msgid "Please connect your printer to the network."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
msgctxt "@label link to technical assistance"
msgid "View user manuals online"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:172
msgctxt "@info"
msgid "In order to monitor your print from Cura, please connect the printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
msgctxt "@label"
msgid "Mesh Type"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
msgctxt "@label"
msgid "Normal model"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
msgctxt "@label"
msgid "Print as support"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
msgctxt "@label"
msgid "Modify settings for overlaps"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
msgctxt "@label"
msgid "Don't support overlaps"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
msgctxt "@item:inlistbox"
msgid "Infill mesh only"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
msgctxt "@item:inlistbox"
msgid "Cutting mesh"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
msgctxt "@action:button"
msgid "Select settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
msgctxt "@title:window"
msgid "Select Settings to Customize for this model"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
msgctxt "@label:textbox"
msgid "Filter..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
msgctxt "@label:checkbox"
msgid "Show all"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
msgctxt "@title:window"
msgid "Post Processing Plugin"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
msgctxt "@label"
msgid "Post Processing Scripts"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
msgctxt "@action"
msgid "Add a script"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
msgctxt "@label"
msgid "Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
msgctxt "@info:tooltip"
msgid "Change active post-processing scripts."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
msgctxt "@info:tooltip"
msgid "The following script is active:"
msgid_plural "The following scripts are active:"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
msgctxt "@label"
msgid "Color scheme"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
msgctxt "@label:listbox"
msgid "Material Color"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
msgctxt "@label:listbox"
msgid "Line Type"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
msgctxt "@label:listbox"
msgid "Speed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
msgctxt "@label:listbox"
msgid "Layer Thickness"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
msgctxt "@label:listbox"
msgid "Line Width"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
msgctxt "@label:listbox"
msgid "Flow"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
msgctxt "@label"
msgid "Compatibility Mode"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
msgctxt "@label"
msgid "Travels"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
msgctxt "@label"
msgid "Helpers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
msgctxt "@label"
msgid "Shell"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
msgctxt "@label"
msgid "Infill"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
msgctxt "@label"
msgid "Starts"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
msgctxt "@label"
msgid "Only Show Top Layers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
msgctxt "@label"
msgid "Show 5 Detailed Layers On Top"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
msgctxt "@label"
msgid "Top / Bottom"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
msgctxt "@label"
msgid "Inner Wall"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
msgctxt "@label"
msgid "min"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
msgctxt "@label"
msgid "max"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
msgctxt "@title:window"
msgid "More information on anonymous data collection"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
msgctxt "@text:window"
msgid ""
"Ultimaker Cura collects anonymous data in order to improve the print quality "
"and user experience. Below is an example of all the data that is shared:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
msgctxt "@text:window"
msgid "I don't want to send anonymous data"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
msgctxt "@text:window"
msgid "Allow sending anonymous data"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
msgctxt "@action:button"
msgid "Back"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
msgctxt "@label"
msgid "Compatibility"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
msgctxt "@label:table_header"
msgid "Machine"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
msgctxt "@label:table_header"
msgid "Build Plate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
msgctxt "@label:table_header"
msgid "Support"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
msgctxt "@label:table_header"
msgid "Quality"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
msgctxt "@action:label"
msgid "Technical Data Sheet"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
msgctxt "@action:label"
msgid "Safety Data Sheet"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
msgctxt "@action:label"
msgid "Printing Guidelines"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
msgctxt "@action:label"
msgid "Website"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
msgctxt "@action:button"
msgid "Installed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
msgid "<a href='%1'>Log in</a> is required to install or update"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
msgid "<a href='%1'>Buy material spools</a>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
msgctxt "@action:button"
msgid "Update"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
msgctxt "@action:button"
msgid "Updating"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
msgctxt "@action:button"
msgid "Updated"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
msgctxt "@label"
msgid "Premium"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
msgctxt "@info:tooltip"
msgid "Go to Web Marketplace"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
msgctxt "@label"
msgid "Search materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
msgctxt "@info"
msgid "You will need to restart Cura before changes in packages have effect."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
msgctxt "@info:button, %1 is the application name"
msgid "Quit %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
msgctxt "@title:tab"
msgid "Plugins"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:475
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
msgctxt "@title:tab"
msgid "Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
msgctxt "@title:tab"
msgid "Installed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
msgctxt "@label"
msgid "Will install upon restarting"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
msgid "<a href='%1'>Log in</a> is required to update"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
msgctxt "@action:button"
msgid "Downgrade"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
msgctxt "@action:button"
msgid "Uninstall"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
msgctxt "@action:button"
msgid "Install"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
msgctxt "@title"
msgid "Changes from your account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
msgctxt "@button"
msgid "Dismiss"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
msgctxt "@button"
msgid "Next"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
msgctxt "@label"
msgid "The following packages will be added:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
msgctxt "@label"
msgid ""
"The following packages can not be installed because of an incompatible Cura "
"version:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
msgctxt "@title:window"
msgid "Confirm uninstall"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
msgctxt "@text:window"
msgid ""
"You are uninstalling materials and/or profiles that are still in use. "
"Confirming will reset the following materials/profiles to their defaults."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
msgctxt "@text:window"
msgid "Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
msgctxt "@text:window"
msgid "Profiles"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
msgctxt "@action:button"
msgid "Confirm"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
msgctxt "@label"
msgid "You need to accept the license to install the package"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
msgctxt "@label"
msgid "Website"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
msgctxt "@label"
msgid "Email"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
msgctxt "@label"
msgid "Version"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
msgctxt "@label"
msgid "Last updated"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
msgctxt "@label"
msgid "Brand"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
msgctxt "@label"
msgid "Downloads"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
msgctxt "@label"
msgid "Community Contributions"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
msgctxt "@label"
msgid "Community Plugins"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
msgctxt "@label"
msgid "Generic Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
msgctxt "@info"
msgid ""
"Could not connect to the Cura Package database. Please check your connection."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
msgctxt "@title:tab"
msgid "Installed plugins"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
msgctxt "@info"
msgid "No plugin has been installed."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
msgctxt "@title:tab"
msgid "Installed materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
msgctxt "@info"
msgid "No material has been installed."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
msgctxt "@title:tab"
msgid "Bundled plugins"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
msgctxt "@title:tab"
msgid "Bundled materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
msgctxt "@info"
msgid "Fetching packages..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
msgctxt "@description"
msgid ""
"Please sign in to get verified plugins and materials for Ultimaker Cura "
"Enterprise"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
msgctxt "@title"
msgid "Marketplace"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
msgctxt "@title"
msgid "Build Plate Leveling"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
msgctxt "@label"
msgid ""
"To make sure your prints will come out great, you can now adjust your "
"buildplate. When you click 'Move to Next Position' the nozzle will move to "
"the different positions that can be adjusted."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
msgctxt "@label"
msgid ""
"For every position; insert a piece of paper under the nozzle and adjust the "
"print build plate height. The print build plate height is right when the "
"paper is slightly gripped by the tip of the nozzle."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
msgctxt "@action:button"
msgid "Start Build Plate Leveling"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
msgctxt "@action:button"
msgid "Move to Next Position"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
msgctxt "@label"
msgid "Please select any upgrades made to this Ultimaker Original"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
msgctxt "@label"
msgid "Heated Build Plate (official kit or self-built)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
msgctxt "@title:window"
msgid "Connect to Networked Printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
msgctxt "@label"
msgid ""
"To print directly to your printer over the network, please make sure your "
"printer is connected to the network using a network cable or by connecting "
"your printer to your WIFI network. If you don't connect Cura with your "
"printer, you can still use a USB drive to transfer g-code files to your "
"printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
msgctxt "@label"
msgid "Select your printer from the list below:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
msgctxt "@action:button"
msgid "Edit"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
msgctxt "@action:button"
msgid "Remove"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
msgctxt "@action:button"
msgid "Refresh"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
msgctxt "@label"
msgid ""
"If your printer is not listed, read the <a href='%1'>network printing "
"troubleshooting guide</a>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
msgctxt "@label"
msgid "Type"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
msgctxt "@label"
msgid "Firmware version"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
msgctxt "@label"
msgid "Address"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
msgctxt "@label"
msgid "This printer is not set up to host a group of printers."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
msgctxt "@label"
msgid "This printer is the host for a group of %1 printers."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
msgctxt "@label"
msgid "The printer at this address has not yet responded."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
msgctxt "@action:button"
msgid "Connect"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
msgctxt "@title:window"
msgid "Invalid IP address"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
msgctxt "@text"
msgid "Please enter a valid IP address."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
msgctxt "@title:window"
msgid "Printer Address"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
msgctxt "@label"
msgid "Enter the IP address of your printer on the network."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
msgctxt "@title:window"
msgid "Configuration Changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
msgctxt "@action:button"
msgid "Override"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
msgctxt "@label"
msgid "The assigned printer, %1, requires the following configuration change:"
msgid_plural ""
"The assigned printer, %1, requires the following configuration changes:"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
msgctxt "@label"
msgid ""
"The printer %1 is assigned, but the job contains an unknown material "
"configuration."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
msgctxt "@label"
msgid "Change material %1 from %2 to %3."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
msgctxt "@label"
msgid "Load %3 as material %1 (This cannot be overridden)."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
msgctxt "@label"
msgid "Change print core %1 from %2 to %3."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
msgctxt "@label"
msgid "Change build plate to %1 (This cannot be overridden)."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
msgctxt "@label"
msgid ""
"Override will use the specified settings with the existing printer "
"configuration. This may result in a failed print."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
msgctxt "@label"
msgid "Glass"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
msgctxt "@label"
msgid "Aluminum"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
msgctxt "@label"
msgid "Move to top"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
msgctxt "@label"
msgid "Delete"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:290
msgctxt "@label"
msgid "Resume"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
msgctxt "@label"
msgid "Pausing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
msgctxt "@label"
msgid "Resuming..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:285
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:294
msgctxt "@label"
msgid "Pause"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
msgctxt "@label"
msgid "Aborting..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
msgctxt "@label"
msgid "Abort"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
msgctxt "@label %1 is the name of a print job."
msgid "Are you sure you want to move %1 to the top of the queue?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
msgctxt "@window:title"
msgid "Move print job to top"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
msgctxt "@label %1 is the name of a print job."
msgid "Are you sure you want to delete %1?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
msgctxt "@window:title"
msgid "Delete print job"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
msgctxt "@label %1 is the name of a print job."
msgid "Are you sure you want to abort %1?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:336
msgctxt "@window:title"
msgid "Abort print"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
msgctxt "@label link to Connect and Cloud interfaces"
msgid "Manage printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
msgctxt "@info"
msgid "Please update your printer's firmware to manage the queue remotely."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
msgctxt "@info"
msgid ""
"Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click "
"\"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
msgctxt "@label:status"
msgid "Loading..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
msgctxt "@label:status"
msgid "Unavailable"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
msgctxt "@label:status"
msgid "Unreachable"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
msgctxt "@label:status"
msgid "Idle"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
msgctxt "@label:status"
msgid "Preparing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
msgctxt "@label:status"
msgid "Printing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
msgctxt "@label"
msgid "Untitled"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
msgctxt "@label"
msgid "Anonymous"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
msgctxt "@label:status"
msgid "Requires configuration changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
msgctxt "@action:button"
msgid "Details"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
msgctxt "@label"
msgid "Unavailable printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
msgctxt "@label"
msgid "First available"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
msgctxt "@label:status"
msgid "Aborted"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
msgctxt "@label:status"
msgid "Finished"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
msgctxt "@label:status"
msgid "Aborting..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
msgctxt "@label:status"
msgid "Pausing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
msgctxt "@label:status"
msgid "Paused"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
msgctxt "@label:status"
msgid "Resuming..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
msgctxt "@label:status"
msgid "Action required"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
msgctxt "@label:status"
msgid "Finishes %1 at %2"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
msgctxt "@label"
msgid "Queued"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
msgctxt "@label link to connect manager"
msgid "Manage in browser"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
msgctxt "@label"
msgid "There are no print jobs in the queue. Slice and send a job to add one."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
msgctxt "@label"
msgid "Print jobs"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
msgctxt "@label"
msgid "Total print time"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
msgctxt "@label"
msgid "Waiting for"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
msgctxt "@title:window"
msgid "Print over network"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
msgctxt "@action:button"
msgid "Print"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
msgctxt "@label"
msgid "Printer selection"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
msgctxt "@action:button"
msgid "Sign in"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:20
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:64
msgctxt "@label"
msgid "Sign in to the Ultimaker platform"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:42
msgctxt "@text"
msgid ""
"- Add material profiles and plug-ins from the Marketplace\n"
"- Back-up and sync your material profiles and plug-ins\n"
"- Share ideas and get help from 48,000+ users in the Ultimaker community"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:62
msgctxt "@button"
msgid "Create a free Ultimaker account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
msgctxt "@label"
msgid "Checking..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
msgctxt "@label"
msgid "Account synced"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
msgctxt "@label"
msgid "Something went wrong..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
msgctxt "@button"
msgid "Install pending updates"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
msgctxt "@button"
msgid "Check for account updates"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:82
msgctxt "@label The argument is a timestamp"
msgid "Last update: %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:110
msgctxt "@button"
msgid "Ultimaker Account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:126
msgctxt "@button"
msgid "Sign Out"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
msgctxt "@label"
msgid "No time estimation available"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
msgctxt "@label"
msgid "No cost estimation available"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
msgctxt "@button"
msgid "Preview"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
msgctxt "@label"
msgid "Time estimation"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
msgctxt "@label"
msgid "Material estimation"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
msgctxt "@label m for meter"
msgid "%1m"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
msgctxt "@label g for grams"
msgid "%1g"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
msgctxt "@label:PrintjobStatus"
msgid "Slicing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
msgctxt "@label:PrintjobStatus"
msgid "Unable to slice"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
msgctxt "@button"
msgid "Processing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
msgctxt "@button"
msgid "Slice"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
msgctxt "@label"
msgid "Start the slicing process"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
msgctxt "@button"
msgid "Cancel"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:83
msgctxt "@action:inmenu"
msgid "Show Online Troubleshooting Guide"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:90
msgctxt "@action:inmenu"
msgid "Toggle Full Screen"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:98
msgctxt "@action:inmenu"
msgid "Exit Full Screen"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:105
msgctxt "@action:inmenu menubar:edit"
msgid "&Undo"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:115
msgctxt "@action:inmenu menubar:edit"
msgid "&Redo"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:133
msgctxt "@action:inmenu menubar:file"
msgid "&Quit"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:141
msgctxt "@action:inmenu menubar:view"
msgid "3D View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:148
msgctxt "@action:inmenu menubar:view"
msgid "Front View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:155
msgctxt "@action:inmenu menubar:view"
msgid "Top View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:162
msgctxt "@action:inmenu menubar:view"
msgid "Bottom View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:169
msgctxt "@action:inmenu menubar:view"
msgid "Left Side View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:176
msgctxt "@action:inmenu menubar:view"
msgid "Right Side View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:190
msgctxt "@action:inmenu"
msgid "Configure Cura..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:197
msgctxt "@action:inmenu menubar:printer"
msgid "&Add Printer..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:203
msgctxt "@action:inmenu menubar:printer"
msgid "Manage Pr&inters..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
msgctxt "@action:inmenu"
msgid "Manage Materials..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:218
msgctxt "@action:inmenu"
msgid "Add more materials from Marketplace"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:225
msgctxt "@action:inmenu menubar:profile"
msgid "&Update profile with current settings/overrides"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:233
msgctxt "@action:inmenu menubar:profile"
msgid "&Discard current changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:245
msgctxt "@action:inmenu menubar:profile"
msgid "&Create profile from current settings/overrides..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:251
msgctxt "@action:inmenu menubar:profile"
msgid "Manage Profiles..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:259
msgctxt "@action:inmenu menubar:help"
msgid "Show Online &Documentation"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:267
msgctxt "@action:inmenu menubar:help"
msgid "Report a &Bug"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
msgctxt "@action:inmenu menubar:help"
msgid "What's New"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:289
msgctxt "@action:inmenu menubar:help"
msgid "About..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:296
msgctxt "@action:inmenu menubar:edit"
msgid "Delete Selected"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:306
msgctxt "@action:inmenu menubar:edit"
msgid "Center Selected"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:315
msgctxt "@action:inmenu menubar:edit"
msgid "Multiply Selected"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:324
msgctxt "@action:inmenu"
msgid "Delete Model"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:332
msgctxt "@action:inmenu"
msgid "Ce&nter Model on Platform"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:338
msgctxt "@action:inmenu menubar:edit"
msgid "&Group Models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:358
msgctxt "@action:inmenu menubar:edit"
msgid "Ungroup Models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:368
msgctxt "@action:inmenu menubar:edit"
msgid "&Merge Models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:378
msgctxt "@action:inmenu"
msgid "&Multiply Model..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:385
msgctxt "@action:inmenu menubar:edit"
msgid "Select All Models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:395
msgctxt "@action:inmenu menubar:edit"
msgid "Clear Build Plate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
msgctxt "@action:inmenu menubar:file"
msgid "Reload All Models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:414
msgctxt "@action:inmenu menubar:edit"
msgid "Arrange All Models To All Build Plates"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:421
msgctxt "@action:inmenu menubar:edit"
msgid "Arrange All Models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:429
msgctxt "@action:inmenu menubar:edit"
msgid "Arrange Selection"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:436
msgctxt "@action:inmenu menubar:edit"
msgid "Reset All Model Positions"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:443
msgctxt "@action:inmenu menubar:edit"
msgid "Reset All Model Transformations"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:452
msgctxt "@action:inmenu menubar:file"
msgid "&Open File(s)..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:462
msgctxt "@action:inmenu menubar:file"
msgid "&New Project..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:469
msgctxt "@action:inmenu menubar:help"
msgid "Show Configuration Folder"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:476
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:535
msgctxt "@action:menu"
msgid "Configure setting visibility..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:483
msgctxt "@action:menu"
msgid "&Marketplace"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
msgctxt "@label:button"
msgid "My printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
msgctxt "@tooltip:button"
msgid "Monitor printers in Ultimaker Digital Factory."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
msgctxt "@tooltip:button"
msgid "Create print projects in Digital Library."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
msgctxt "@label:button"
msgid "Print jobs"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
msgctxt "@tooltip:button"
msgid "Monitor print jobs and reprint from your print history."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
msgctxt "@tooltip:button"
msgid "Extend Ultimaker Cura with plugins and material profiles."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
msgctxt "@tooltip:button"
msgid "Become a 3D printing expert with Ultimaker e-learning."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
msgctxt "@label:button"
msgid "Ultimaker support"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
msgctxt "@tooltip:button"
msgid "Learn how to get started with Ultimaker Cura."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
msgctxt "@label:button"
msgid "Ask a question"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
msgctxt "@tooltip:button"
msgid "Consult the Ultimaker Community."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
msgctxt "@label:button"
msgid "Report a bug"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
msgctxt "@tooltip:button"
msgid "Let developers know that something is going wrong."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
msgctxt "@tooltip:button"
msgid "Visit the Ultimaker website."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:257
msgctxt "@label"
msgid "This package will be installed after restarting."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:17
msgctxt "@title:tab"
msgid "General"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:471
msgctxt "@title:tab"
msgid "Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:473
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
msgctxt "@title:tab"
msgid "Printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:477
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
msgctxt "@title:tab"
msgid "Profiles"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:594
msgctxt "@title:window %1 is the application name"
msgid "Closing %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:595
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:607
msgctxt "@label %1 is the application name"
msgid "Are you sure you want to exit %1?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:645
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
msgctxt "@title:window"
msgid "Open file(s)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
msgctxt "@window:title"
msgid "Install Package"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:763
msgctxt "@title:window"
msgid "Open File(s)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:766
msgctxt "@text:window"
msgid ""
"We have found one or more G-Code files within the files you have selected. "
"You can only open one G-Code file at a time. If you want to open a G-Code "
"file, please just select only one."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:875
msgctxt "@title:window"
msgid "Add Printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:883
msgctxt "@title:window"
msgid "What's New"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
msgctxt "@title:window The argument is the application name."
msgid "About %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
msgctxt "@label"
msgid "version: %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
msgctxt "@label"
msgid "End-to-end solution for fused filament 3D printing."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
msgctxt "@info:credit"
msgid ""
"Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
"Cura proudly uses the following open source projects:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
msgctxt "@label"
msgid "Graphical user interface"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
msgctxt "@label"
msgid "Application framework"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
msgctxt "@label"
msgid "G-code generator"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
msgctxt "@label"
msgid "Interprocess communication library"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
msgctxt "@label"
msgid "Programming language"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
msgctxt "@label"
msgid "GUI framework"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
msgctxt "@label"
msgid "GUI framework bindings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
msgctxt "@label"
msgid "C/C++ Binding library"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
msgctxt "@label"
msgid "Data interchange format"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
msgctxt "@label"
msgid "Support library for scientific computing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
msgctxt "@label"
msgid "Support library for faster math"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
msgctxt "@label"
msgid "Support library for handling STL files"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
msgctxt "@label"
msgid "Support library for handling planar objects"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
msgctxt "@label"
msgid "Support library for handling triangular meshes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
msgctxt "@label"
msgid "Support library for handling 3MF files"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
msgctxt "@label"
msgid "Support library for file metadata and streaming"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
msgctxt "@label"
msgid "Serial communication library"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
msgctxt "@label"
msgid "ZeroConf discovery library"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
msgctxt "@label"
msgid "Polygon clipping library"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
msgctxt "@Label"
msgid "Static type checker for Python"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
msgctxt "@Label"
msgid "Root Certificates for validating SSL trustworthiness"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
msgctxt "@Label"
msgid "Python Error tracking library"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
msgctxt "@label"
msgid "Polygon packing library, developed by Prusa Research"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
msgctxt "@label"
msgid "Python bindings for libnest2d"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:161
msgctxt "@label"
msgid "Support library for system keyring access"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
msgctxt "@label"
msgid "Python extensions for Microsoft Windows"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
msgctxt "@label"
msgid "Font"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
msgctxt "@label"
msgid "SVG icons"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:165
msgctxt "@label"
msgid "Linux cross-distribution application deployment"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
msgctxt "@title:window"
msgid "Open project file"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
msgctxt "@text:window"
msgid ""
"This is a Cura project file. Would you like to open it as a project or "
"import the models from it?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
msgctxt "@text:window"
msgid "Remember my choice"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
msgctxt "@action:button"
msgid "Open as project"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
msgctxt "@action:button"
msgid "Import models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
msgctxt "@title:window"
msgid "Discard or Keep changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
msgctxt "@text:window, %1 is a profile name"
msgid ""
"You have customized some profile settings.\n"
"Would you like to Keep these changed settings after switching profiles?\n"
"Alternatively, you can discard the changes to load the defaults from '%1'."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
msgctxt "@title:column"
msgid "Profile settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
msgctxt "@title:column"
msgid "Current changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:755
msgctxt "@option:discardOrKeep"
msgid "Always ask me this"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
msgctxt "@option:discardOrKeep"
msgid "Discard and never ask again"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
msgctxt "@option:discardOrKeep"
msgid "Keep and never ask again"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
msgctxt "@action:button"
msgid "Discard changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
msgctxt "@action:button"
msgid "Keep changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
msgctxt "@text:window"
msgid ""
"We have found one or more project file(s) within the files you have "
"selected. You can open only one project file at a time. We suggest to only "
"import models from those files. Would you like to proceed?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
msgctxt "@action:button"
msgid "Import all as models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
msgctxt "@title:window"
msgid "Save Project"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
msgctxt "@action:label"
msgid "Extruder %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
msgctxt "@action:label"
msgid "%1 & material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
msgctxt "@action:label"
msgid "Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
msgctxt "@action:label"
msgid "Don't show project summary on save again"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
msgctxt "@action:button"
msgid "Save"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
msgctxt "@label %1 is filled in with the name of an extruder"
msgid "Print Selected Model with %1"
msgid_plural "Print Selected Models with %1"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
msgctxt "@text Print job name"
msgid "Untitled"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
msgctxt "@title:menu menubar:toplevel"
msgid "&File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
msgctxt "@title:menu menubar:toplevel"
msgid "&Edit"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
msgctxt "@title:menu menubar:toplevel"
msgid "&View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
msgctxt "@title:menu menubar:toplevel"
msgid "&Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
msgctxt "@title:menu menubar:toplevel"
msgid "E&xtensions"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
msgctxt "@title:menu menubar:toplevel"
msgid "P&references"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
msgctxt "@title:menu menubar:toplevel"
msgid "&Help"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
msgctxt "@title:window"
msgid "New project"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
msgctxt "@info:question"
msgid ""
"Are you sure you want to start a new project? This will clear the build "
"plate and any unsaved settings."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
msgctxt "@action:button"
msgid "Marketplace"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
msgctxt "@header"
msgid "Configurations"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
msgctxt "@label"
msgid ""
"This configuration is not available because %1 is not recognized. Please "
"visit %2 to download the correct material profile."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
msgctxt "@label"
msgid "Marketplace"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
msgctxt "@label"
msgid "Loading available configurations from the printer..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
msgctxt "@label"
msgid ""
"The configurations are not available because the printer is disconnected."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:140
msgctxt "@label"
msgid "Select configuration"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:251
msgctxt "@label"
msgid "Configurations"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
msgctxt "@header"
msgid "Custom"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
msgctxt "@label"
msgid "Printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
msgctxt "@label"
msgid "Enabled"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
msgctxt "@label"
msgid "Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
msgctxt "@label"
msgid "Use glue for better adhesion with this material combination."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
msgctxt "@label"
msgid "Print Selected Model With:"
msgid_plural "Print Selected Models With:"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
msgctxt "@title:window"
msgid "Multiply Selected Model"
msgid_plural "Multiply Selected Models"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
msgctxt "@label"
msgid "Number of Copies"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:41
msgctxt "@title:menu menubar:file"
msgid "&Save Project..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:74
msgctxt "@title:menu menubar:file"
msgid "&Export..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:85
msgctxt "@action:inmenu menubar:file"
msgid "Export Selection..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
msgctxt "@label:category menu label"
msgid "Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
msgctxt "@label:category menu label"
msgid "Favorites"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
msgctxt "@label:category menu label"
msgid "Generic"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
msgctxt "@title:menu menubar:file"
msgid "Open File(s)..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
msgctxt "@label:category menu label"
msgid "Network enabled printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
msgctxt "@label:category menu label"
msgid "Local printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
msgctxt "@title:menu menubar:file"
msgid "Open &Recent"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
msgctxt "@title:menu menubar:file"
msgid "Save Project..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
msgctxt "@title:menu menubar:settings"
msgid "&Printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
msgctxt "@title:menu"
msgid "&Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
msgctxt "@action:inmenu"
msgid "Set as Active Extruder"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
msgctxt "@action:inmenu"
msgid "Enable Extruder"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
msgctxt "@action:inmenu"
msgid "Disable Extruder"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
msgctxt "@action:inmenu"
msgid "Visible Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
msgctxt "@action:inmenu"
msgid "Collapse All Categories"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
msgctxt "@action:inmenu"
msgid "Manage Setting Visibility..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
msgctxt "@action:inmenu menubar:view"
msgid "&Camera position"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:45
msgctxt "@action:inmenu menubar:view"
msgid "Camera view"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:48
msgctxt "@action:inmenu menubar:view"
msgid "Perspective"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:60
msgctxt "@action:inmenu menubar:view"
msgid "Orthographic"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:81
msgctxt "@action:inmenu menubar:view"
msgid "&Build plate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
msgctxt "@label:MonitorStatus"
msgid "Not connected to a printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
msgctxt "@label:MonitorStatus"
msgid "Printer does not accept commands"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
msgctxt "@label:MonitorStatus"
msgid "In maintenance. Please check the printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
msgctxt "@label:MonitorStatus"
msgid "Lost connection with the printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
msgctxt "@label:MonitorStatus"
msgid "Printing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
msgctxt "@label:MonitorStatus"
msgid "Paused"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
msgctxt "@label:MonitorStatus"
msgid "Preparing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
msgctxt "@label:MonitorStatus"
msgid "Please remove the print"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:326
msgctxt "@label"
msgid "Abort Print"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:338
msgctxt "@label"
msgid "Are you sure you want to abort the print?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:112
msgctxt "@label"
msgid "Is printed as support."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:115
msgctxt "@label"
msgid "Other models overlapping with this model are modified."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:118
msgctxt "@label"
msgid "Infill overlapping with this model is modified."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:121
msgctxt "@label"
msgid "Overlaps with this model are not supported."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:128
msgctxt "@label %1 is the number of settings it overrides."
msgid "Overrides %1 setting."
msgid_plural "Overrides %1 settings."
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
msgctxt "@label"
msgid "Object list"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:143
msgctxt "@label"
msgid "Interface"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:215
msgctxt "@label"
msgid "Currency:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:228
msgctxt "@label"
msgid "Theme:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:273
msgctxt "@label"
msgid ""
"You will need to restart the application for these changes to have effect."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:290
msgctxt "@info:tooltip"
msgid "Slice automatically when changing settings."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:298
msgctxt "@option:check"
msgid "Slice automatically"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:312
msgctxt "@label"
msgid "Viewport behavior"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:320
msgctxt "@info:tooltip"
msgid ""
"Highlight unsupported areas of the model in red. Without support these areas "
"will not print properly."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:329
msgctxt "@option:check"
msgid "Display overhang"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:339
msgctxt "@info:tooltip"
msgid ""
"Highlight missing or extraneous surfaces of the model using warning signs. "
"The toolpaths will often be missing parts of the intended geometry."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:348
msgctxt "@option:check"
msgid "Display model errors"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:356
msgctxt "@info:tooltip"
msgid ""
"Moves the camera so the model is in the center of the view when a model is "
"selected"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:361
msgctxt "@action:button"
msgid "Center camera when item is selected"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:371
msgctxt "@info:tooltip"
msgid "Should the default zoom behavior of cura be inverted?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:376
msgctxt "@action:button"
msgid "Invert the direction of camera zoom."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:392
msgctxt "@info:tooltip"
msgid "Should zooming move in the direction of the mouse?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:392
msgctxt "@info:tooltip"
msgid ""
"Zooming towards the mouse is not supported in the orthographic perspective."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:397
msgctxt "@action:button"
msgid "Zoom toward mouse direction"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:423
msgctxt "@info:tooltip"
msgid ""
"Should models on the platform be moved so that they no longer intersect?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:428
msgctxt "@option:check"
msgid "Ensure models are kept apart"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:437
msgctxt "@info:tooltip"
msgid "Should models on the platform be moved down to touch the build plate?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:442
msgctxt "@option:check"
msgid "Automatically drop models to the build plate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
msgctxt "@info:tooltip"
msgid "Show caution message in g-code reader."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:463
msgctxt "@option:check"
msgid "Caution message in g-code reader"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:471
msgctxt "@info:tooltip"
msgid "Should layer be forced into compatibility mode?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:476
msgctxt "@option:check"
msgid "Force layer view compatibility mode (restart required)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:486
msgctxt "@info:tooltip"
msgid "Should Cura open at the location it was closed?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:491
msgctxt "@option:check"
msgid "Restore window position on start"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:501
msgctxt "@info:tooltip"
msgid "What type of camera rendering should be used?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:508
msgctxt "@window:text"
msgid "Camera rendering:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:515
msgid "Perspective"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:516
msgid "Orthographic"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:554
msgctxt "@label"
msgid "Opening and saving files"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:561
msgctxt "@info:tooltip"
msgid ""
"Should opening files from the desktop or external applications open in the "
"same instance of Cura?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:566
msgctxt "@option:check"
msgid "Use a single instance of Cura"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:576
msgctxt "@info:tooltip"
msgid ""
"Should the build plate be cleared before loading a new model in the single "
"instance of Cura?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:582
msgctxt "@option:check"
msgid "Clear buildplate before loading model into the single instance"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:592
msgctxt "@info:tooltip"
msgid "Should models be scaled to the build volume if they are too large?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:597
msgctxt "@option:check"
msgid "Scale large models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:607
msgctxt "@info:tooltip"
msgid ""
"An model may appear extremely small if its unit is for example in meters "
"rather than millimeters. Should these models be scaled up?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:612
msgctxt "@option:check"
msgid "Scale extremely small models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:622
msgctxt "@info:tooltip"
msgid "Should models be selected after they are loaded?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:627
msgctxt "@option:check"
msgid "Select models when loaded"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:637
msgctxt "@info:tooltip"
msgid ""
"Should a prefix based on the printer name be added to the print job name "
"automatically?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:642
msgctxt "@option:check"
msgid "Add machine prefix to job name"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:652
msgctxt "@info:tooltip"
msgid "Should a summary be shown when saving a project file?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:656
msgctxt "@option:check"
msgid "Show summary dialog when saving project"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:666
msgctxt "@info:tooltip"
msgid "Default behavior when opening a project file"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:674
msgctxt "@window:text"
msgid "Default behavior when opening a project file: "
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:688
msgctxt "@option:openProject"
msgid "Always ask me this"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:689
msgctxt "@option:openProject"
msgid "Always open as a project"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:690
msgctxt "@option:openProject"
msgid "Always import models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:727
msgctxt "@info:tooltip"
msgid ""
"When you have made changes to a profile and switched to a different one, a "
"dialog will be shown asking whether you want to keep your modifications or "
"not, or you can choose a default behaviour and never show that dialog again."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:736
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
msgctxt "@label"
msgid "Profiles"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:741
msgctxt "@window:text"
msgid ""
"Default behavior for changed setting values when switching to a different "
"profile: "
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:756
msgctxt "@option:discardOrKeep"
msgid "Always discard changed settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:757
msgctxt "@option:discardOrKeep"
msgid "Always transfer changed settings to new profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:791
msgctxt "@label"
msgid "Privacy"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:797
msgctxt "@info:tooltip"
msgid ""
"Should anonymous data about your print be sent to Ultimaker? Note, no "
"models, IP addresses or other personally identifiable information is sent or "
"stored."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:802
msgctxt "@option:check"
msgid "Send (anonymous) print information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:811
msgctxt "@action:button"
msgid "More information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:829
msgctxt "@label"
msgid "Updates"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:836
msgctxt "@info:tooltip"
msgid "Should Cura check for updates when the program is started?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:841
msgctxt "@option:check"
msgid "Check for updates on start"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:852
msgctxt "@info:tooltip"
msgid "When checking for updates, only check for stable releases."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:857
msgctxt "@option:radio"
msgid "Stable releases only"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:868
msgctxt "@info:tooltip"
msgid "When checking for updates, check for both stable and for beta releases."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:873
msgctxt "@option:radio"
msgid "Stable and Beta releases"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:884
msgctxt "@info:tooltip"
msgid ""
"Should an automatic check for new plugins be done every time Cura is "
"started? It is highly recommended that you do not disable this!"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:889
msgctxt "@option:check"
msgid "Get notifications for plugin updates"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
msgctxt "@action:button"
msgid "Activate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
msgctxt "@action:button"
msgid "Rename"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
msgctxt "@action:button"
msgid "Create"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
msgctxt "@action:button"
msgid "Duplicate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
msgctxt "@action:button"
msgid "Import"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
msgctxt "@action:button"
msgid "Export"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
msgctxt "@action:button Sending materials to printers"
msgid "Sync with Printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:249
msgctxt "@action:label"
msgid "Printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:313
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:277
msgctxt "@title:window"
msgid "Confirm Remove"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:316
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:278
msgctxt "@label (%1 is object name)"
msgid "Are you sure you wish to remove %1? This cannot be undone!"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:330
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
msgctxt "@title:window"
msgid "Import Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:339
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid ""
"Could not import material <filename>%1</filename>: <message>%2</message>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:343
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Successfully imported material <filename>%1</filename>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:361
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:369
msgctxt "@title:window"
msgid "Export Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:373
msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
msgid ""
"Failed to export material to <filename>%1</filename>: <message>%2</message>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:379
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Successfully exported material to <filename>%1</filename>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:389
msgctxt "@title:window"
msgid "Export All Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
msgctxt "@title"
msgid "Information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
msgctxt "@title:window"
msgid "Confirm Diameter Change"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
msgctxt "@label (%1 is a number)"
msgid ""
"The new filament diameter is set to %1 mm, which is not compatible with the "
"current extruder. Do you wish to continue?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
msgctxt "@label"
msgid "Display Name"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
msgctxt "@label"
msgid "Material Type"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
msgctxt "@label"
msgid "Color"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
msgctxt "@label"
msgid "Properties"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
msgctxt "@label"
msgid "Density"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
msgctxt "@label"
msgid "Diameter"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
msgctxt "@label"
msgid "Filament Cost"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
msgctxt "@label"
msgid "Filament weight"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
msgctxt "@label"
msgid "Filament length"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
msgctxt "@label"
msgid "Cost per Meter"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
msgctxt "@label"
msgid "This material is linked to %1 and shares some of its properties."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
msgctxt "@label"
msgid "Unlink Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
msgctxt "@label"
msgid "Description"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
msgctxt "@label"
msgid "Adhesion Information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
msgctxt "@label"
msgid "Print settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
msgctxt "@label"
msgid "Create"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
msgctxt "@label"
msgid "Duplicate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
msgctxt "@title:window"
msgid "Create Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
msgctxt "@info"
msgid "Please provide a name for this profile."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:263
msgctxt "@title:window"
msgid "Duplicate Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:294
msgctxt "@title:window"
msgid "Rename Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:307
msgctxt "@title:window"
msgid "Import Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:336
msgctxt "@title:window"
msgid "Export Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:399
msgctxt "@label %1 is printer name"
msgid "Printer: %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:557
msgctxt "@action:button"
msgid "Update profile with current settings/overrides"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:564
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
msgctxt "@action:button"
msgid "Discard current changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:583
msgctxt "@action:label"
msgid ""
"This profile uses the defaults specified by the printer, so it has no "
"settings/overrides in the list below."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:591
msgctxt "@action:label"
msgid "Your current settings match the selected profile."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:609
msgctxt "@title:tab"
msgid "Global Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
msgctxt "@info:status"
msgid "Calculated"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
msgctxt "@title:column"
msgid "Setting"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
msgctxt "@title:column"
msgid "Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
msgctxt "@title:column"
msgid "Current"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
msgctxt "@title:column"
msgid "Unit"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
msgctxt "@title:tab"
msgid "Setting Visibility"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
msgctxt "@label:textbox"
msgid "Check all"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
msgctxt "@label"
msgid "Extruder"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
msgctxt "@tooltip"
msgid ""
"The target temperature of the hotend. The hotend will heat up or cool down "
"towards this temperature. If this is 0, the hotend heating is turned off."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
msgctxt "@tooltip"
msgid "The current temperature of this hotend."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
msgctxt "@tooltip of temperature input"
msgid "The temperature to pre-heat the hotend to."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
msgctxt "@button Cancel pre-heating"
msgid "Cancel"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
msgctxt "@button"
msgid "Pre-heat"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
msgctxt "@tooltip of pre-heat"
msgid ""
"Heat the hotend in advance before printing. You can continue adjusting your "
"print while it is heating, and you won't have to wait for the hotend to heat "
"up when you're ready to print."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
msgctxt "@tooltip"
msgid "The colour of the material in this extruder."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
msgctxt "@tooltip"
msgid "The material in this extruder."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
msgctxt "@tooltip"
msgid "The nozzle inserted in this extruder."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
msgctxt "@label"
msgid "Build plate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
msgctxt "@tooltip"
msgid ""
"The target temperature of the heated bed. The bed will heat up or cool down "
"towards this temperature. If this is 0, the bed heating is turned off."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
msgctxt "@tooltip"
msgid "The current temperature of the heated bed."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
msgctxt "@tooltip of temperature input"
msgid "The temperature to pre-heat the bed to."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
msgctxt "@tooltip of pre-heat"
msgid ""
"Heat the bed in advance before printing. You can continue adjusting your "
"print while it is heating, and you won't have to wait for the bed to heat up "
"when you're ready to print."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
msgctxt "@label"
msgid "Printer control"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
msgctxt "@label"
msgid "Jog Position"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
msgctxt "@label"
msgid "X/Y"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
msgctxt "@label"
msgid "Z"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
msgctxt "@label"
msgid "Jog Distance"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
msgctxt "@label"
msgid "Send G-code"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
msgctxt "@tooltip of G-code command input"
msgid ""
"Send a custom G-code command to the connected printer. Press 'enter' to send "
"the command."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
msgctxt "@info:status"
msgid "The printer is not connected."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
msgctxt "@status"
msgid ""
"The cloud printer is offline. Please check if the printer is turned on and "
"connected to the internet."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
msgctxt "@status"
msgid ""
"This printer is not linked to your account. Please visit the Ultimaker "
"Digital Factory to establish a connection."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
msgctxt "@status"
msgid ""
"The cloud connection is currently unavailable. Please sign in to connect to "
"the cloud printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
msgctxt "@status"
msgid ""
"The cloud connection is currently unavailable. Please check your internet "
"connection."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
msgctxt "@button"
msgid "Add printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
msgctxt "@button"
msgid "Manage printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
msgctxt "@label"
msgid "Connected printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
msgctxt "@label"
msgid "Preset printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
msgctxt "@label"
msgid "Active print"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
msgctxt "@label"
msgid "Job Name"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
msgctxt "@label"
msgid "Printing Time"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
msgctxt "@label"
msgid "Estimated time left"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
msgctxt "@label"
msgid "Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
msgctxt "@tooltip"
msgid ""
"Some setting/override values are different from the values stored in the "
"profile.\n"
"\n"
"Click to open the profile manager."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
msgctxt "@label:header"
msgid "Custom profiles"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
msgctxt ""
"@label %1 is filled in with the type of a profile. %2 is filled with a list "
"of numbers (eg '1' or '1, 2')"
msgid ""
"There is no %1 profile for the configuration in extruder %2. The default "
"intent will be used instead"
msgid_plural ""
"There is no %1 profile for the configurations in extruders %2. The default "
"intent will be used instead"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
msgctxt "@label shown when we load a Gcode file"
msgid "Print setup disabled. G-code file can not be modified."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
msgctxt "@button"
msgid "Recommended"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
msgctxt "@button"
msgid "Custom"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
msgctxt "@label:Should be short"
msgid "On"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
msgctxt "@label:Should be short"
msgid "Off"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
msgctxt "@label"
msgid "Experimental"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
msgctxt "@label"
msgid "Adhesion"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
msgctxt "@label"
msgid ""
"Enable printing a brim or raft. This will add a flat area around or under "
"your object which is easy to cut off afterwards."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
msgctxt "@label"
msgid "Gradual infill"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
msgctxt "@label"
msgid ""
"Gradual infill will gradually increase the amount of infill towards the top."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
msgctxt "@tooltip"
msgid ""
"You have modified some profile settings. If you want to change these go to "
"custom mode."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
msgctxt "@label"
msgid "Support"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
msgctxt "@label"
msgid ""
"Generate structures to support parts of the model which have overhangs. "
"Without these structures, such parts would collapse during printing."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:203
msgctxt "@label"
msgid ""
"Some hidden settings use values different from their normal calculated "
"value.\n"
"\n"
"Click to make these settings visible."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
msgctxt "@label"
msgid ""
"This setting is not used because all the settings that it influences are "
"overridden."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
msgctxt "@label Header for list of settings."
msgid "Affects"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
msgctxt "@label Header for list of settings."
msgid "Affected By"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:188
msgctxt "@label"
msgid ""
"This setting is always shared between all extruders. Changing it here will "
"change the value for all extruders."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:192
msgctxt "@label"
msgid "This setting is resolved from conflicting extruder-specific values:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:232
msgctxt "@label"
msgid ""
"This setting has a value that is different from the profile.\n"
"\n"
"Click to restore the value of the profile."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:332
msgctxt "@label"
msgid ""
"This setting is normally calculated, but it currently has an absolute value "
"set.\n"
"\n"
"Click to restore the calculated value."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:51
msgctxt "@label:textbox"
msgid "Search settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:453
msgctxt "@action:menu"
msgid "Copy value to all extruders"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:462
msgctxt "@action:menu"
msgid "Copy all changed values to all extruders"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:499
msgctxt "@action:menu"
msgid "Hide this setting"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:512
msgctxt "@action:menu"
msgid "Don't show this setting"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:516
msgctxt "@action:menu"
msgid "Keep this setting visible"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
msgctxt "@info:tooltip"
msgid "3D View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
msgctxt "@info:tooltip"
msgid "Front View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
msgctxt "@info:tooltip"
msgid "Top View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
msgctxt "@info:tooltip"
msgid "Left View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
msgctxt "@info:tooltip"
msgid "Right View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
msgctxt "@label"
msgid "View type"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
msgctxt "@label"
msgid "Add a Cloud printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
msgctxt "@label"
msgid "Waiting for Cloud response"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
msgctxt "@label"
msgid "No printers found in your account?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
msgctxt "@label"
msgid "The following printers in your account have been added in Cura:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
msgctxt "@button"
msgid "Add printer manually"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
msgctxt "@label"
msgid "Manufacturer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
msgctxt "@label"
msgid "Profile author"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
msgctxt "@label"
msgid "Printer name"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
msgctxt "@text"
msgid "Please name your printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
msgctxt "@label"
msgid "Add a printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
msgctxt "@label"
msgid "Add a networked printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
msgctxt "@label"
msgid "Add a non-networked printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
msgctxt "@label"
msgid "There is no printer found over your network."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
msgctxt "@label"
msgid "Refresh"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
msgctxt "@label"
msgid "Add printer by IP"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
msgctxt "@label"
msgid "Add cloud printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
msgctxt "@label"
msgid "Troubleshooting"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
msgctxt "@label"
msgid "Add printer by IP address"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
msgctxt "@text"
msgid "Enter your printer's IP address."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
msgctxt "@button"
msgid "Add"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
msgctxt "@label"
msgid "Could not connect to device."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
msgctxt "@label"
msgid "Can't connect to your Ultimaker printer?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
msgctxt "@label"
msgid "The printer at this address has not responded yet."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
msgctxt "@label"
msgid ""
"This printer cannot be added because it's an unknown printer or it's not the "
"host of a group."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
msgctxt "@button"
msgid "Back"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
msgctxt "@button"
msgid "Connect"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
msgctxt "@label"
msgid "Release Notes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:124
msgctxt "@text"
msgid "Add material settings and plugins from the Marketplace"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:154
msgctxt "@text"
msgid "Backup and sync your material settings and plugins"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:184
msgctxt "@text"
msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:202
msgctxt "@button"
msgid "Skip"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:214
msgctxt "@text"
msgid "Create a free Ultimaker Account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
msgctxt "@label"
msgid "Help us to improve Ultimaker Cura"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
msgctxt "@text"
msgid ""
"Ultimaker Cura collects anonymous data to improve print quality and user "
"experience, including:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
msgctxt "@text"
msgid "Machine types"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
msgctxt "@text"
msgid "Material usage"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
msgctxt "@text"
msgid "Number of slices"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
msgctxt "@text"
msgid "Print settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
msgctxt "@text"
msgid ""
"Data collected by Ultimaker Cura will not contain any personal information."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
msgctxt "@text"
msgid "More information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
msgctxt "@label"
msgid "Empty"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
msgctxt "@label"
msgid "User Agreement"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
msgctxt "@button"
msgid "Decline and close"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
msgctxt "@label"
msgid "Welcome to Ultimaker Cura"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
msgctxt "@text"
msgid ""
"Please follow these steps to set up Ultimaker Cura. This will only take a "
"few moments."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
msgctxt "@button"
msgid "Get started"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
msgctxt "@label"
msgid "What's New"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Widgets/ComboBox.qml:18
msgctxt "@label"
msgid "No items to select from"
msgstr ""

#: ModelChecker/plugin.json
msgctxt "description"
msgid ""
"Checks models and print configuration for possible printing issues and give "
"suggestions."
msgstr ""

#: ModelChecker/plugin.json
msgctxt "name"
msgid "Model Checker"
msgstr ""

#: 3MFReader/plugin.json
msgctxt "description"
msgid "Provides support for reading 3MF files."
msgstr ""

#: 3MFReader/plugin.json
msgctxt "name"
msgid "3MF Reader"
msgstr ""

#: 3MFWriter/plugin.json
msgctxt "description"
msgid "Provides support for writing 3MF files."
msgstr ""

#: 3MFWriter/plugin.json
msgctxt "name"
msgid "3MF Writer"
msgstr ""

#: AMFReader/plugin.json
msgctxt "description"
msgid "Provides support for reading AMF files."
msgstr ""

#: AMFReader/plugin.json
msgctxt "name"
msgid "AMF Reader"
msgstr ""

#: CuraDrive/plugin.json
msgctxt "description"
msgid "Backup and restore your configuration."
msgstr ""

#: CuraDrive/plugin.json
msgctxt "name"
msgid "Cura Backups"
msgstr ""

#: CuraEngineBackend/plugin.json
msgctxt "description"
msgid "Provides the link to the CuraEngine slicing backend."
msgstr ""

#: CuraEngineBackend/plugin.json
msgctxt "name"
msgid "CuraEngine Backend"
msgstr ""

#: CuraProfileReader/plugin.json
msgctxt "description"
msgid "Provides support for importing Cura profiles."
msgstr ""

#: CuraProfileReader/plugin.json
msgctxt "name"
msgid "Cura Profile Reader"
msgstr ""

#: CuraProfileWriter/plugin.json
msgctxt "description"
msgid "Provides support for exporting Cura profiles."
msgstr ""

#: CuraProfileWriter/plugin.json
msgctxt "name"
msgid "Cura Profile Writer"
msgstr ""

#: DigitalLibrary/plugin.json
msgctxt "description"
msgid ""
"Connects to the Digital Library, allowing Cura to open files from and save "
"files to the Digital Library."
msgstr ""

#: DigitalLibrary/plugin.json
msgctxt "name"
msgid "Ultimaker Digital Library"
msgstr ""

#: FirmwareUpdateChecker/plugin.json
msgctxt "description"
msgid "Checks for firmware updates."
msgstr ""

#: FirmwareUpdateChecker/plugin.json
msgctxt "name"
msgid "Firmware Update Checker"
msgstr ""

#: FirmwareUpdater/plugin.json
msgctxt "description"
msgid "Provides a machine actions for updating firmware."
msgstr ""

#: FirmwareUpdater/plugin.json
msgctxt "name"
msgid "Firmware Updater"
msgstr ""

#: GCodeGzReader/plugin.json
msgctxt "description"
msgid "Reads g-code from a compressed archive."
msgstr ""

#: GCodeGzReader/plugin.json
msgctxt "name"
msgid "Compressed G-code Reader"
msgstr ""

#: GCodeGzWriter/plugin.json
msgctxt "description"
msgid "Writes g-code to a compressed archive."
msgstr ""

#: GCodeGzWriter/plugin.json
msgctxt "name"
msgid "Compressed G-code Writer"
msgstr ""

#: GCodeProfileReader/plugin.json
msgctxt "description"
msgid "Provides support for importing profiles from g-code files."
msgstr ""

#: GCodeProfileReader/plugin.json
msgctxt "name"
msgid "G-code Profile Reader"
msgstr ""

#: GCodeReader/plugin.json
msgctxt "description"
msgid "Allows loading and displaying G-code files."
msgstr ""

#: GCodeReader/plugin.json
msgctxt "name"
msgid "G-code Reader"
msgstr ""

#: GCodeWriter/plugin.json
msgctxt "description"
msgid "Writes g-code to a file."
msgstr ""

#: GCodeWriter/plugin.json
msgctxt "name"
msgid "G-code Writer"
msgstr ""

#: ImageReader/plugin.json
msgctxt "description"
msgid "Enables ability to generate printable geometry from 2D image files."
msgstr ""

#: ImageReader/plugin.json
msgctxt "name"
msgid "Image Reader"
msgstr ""

#: LegacyProfileReader/plugin.json
msgctxt "description"
msgid "Provides support for importing profiles from legacy Cura versions."
msgstr ""

#: LegacyProfileReader/plugin.json
msgctxt "name"
msgid "Legacy Cura Profile Reader"
msgstr ""

#: MachineSettingsAction/plugin.json
msgctxt "description"
msgid ""
"Provides a way to change machine settings (such as build volume, nozzle "
"size, etc.)."
msgstr ""

#: MachineSettingsAction/plugin.json
msgctxt "name"
msgid "Machine Settings Action"
msgstr ""

#: MonitorStage/plugin.json
msgctxt "description"
msgid "Provides a monitor stage in Cura."
msgstr ""

#: MonitorStage/plugin.json
msgctxt "name"
msgid "Monitor Stage"
msgstr ""

#: PerObjectSettingsTool/plugin.json
msgctxt "description"
msgid "Provides the Per Model Settings."
msgstr ""

#: PerObjectSettingsTool/plugin.json
msgctxt "name"
msgid "Per Model Settings Tool"
msgstr ""

#: PostProcessingPlugin/plugin.json
msgctxt "description"
msgid "Extension that allows for user created scripts for post processing"
msgstr ""

#: PostProcessingPlugin/plugin.json
msgctxt "name"
msgid "Post Processing"
msgstr ""

#: PrepareStage/plugin.json
msgctxt "description"
msgid "Provides a prepare stage in Cura."
msgstr ""

#: PrepareStage/plugin.json
msgctxt "name"
msgid "Prepare Stage"
msgstr ""

#: PreviewStage/plugin.json
msgctxt "description"
msgid "Provides a preview stage in Cura."
msgstr ""

#: PreviewStage/plugin.json
msgctxt "name"
msgid "Preview Stage"
msgstr ""

#: RemovableDriveOutputDevice/plugin.json
msgctxt "description"
msgid "Provides removable drive hotplugging and writing support."
msgstr ""

#: RemovableDriveOutputDevice/plugin.json
msgctxt "name"
msgid "Removable Drive Output Device Plugin"
msgstr ""

#: SentryLogger/plugin.json
msgctxt "description"
msgid "Logs certain events so that they can be used by the crash reporter"
msgstr ""

#: SentryLogger/plugin.json
msgctxt "name"
msgid "Sentry Logger"
msgstr ""

#: SimulationView/plugin.json
msgctxt "description"
msgid "Provides the Simulation view."
msgstr ""

#: SimulationView/plugin.json
msgctxt "name"
msgid "Simulation View"
msgstr ""

#: SliceInfoPlugin/plugin.json
msgctxt "description"
msgid "Submits anonymous slice info. Can be disabled through preferences."
msgstr ""

#: SliceInfoPlugin/plugin.json
msgctxt "name"
msgid "Slice info"
msgstr ""

#: SolidView/plugin.json
msgctxt "description"
msgid "Provides a normal solid mesh view."
msgstr ""

#: SolidView/plugin.json
msgctxt "name"
msgid "Solid View"
msgstr ""

#: SupportEraser/plugin.json
msgctxt "description"
msgid ""
"Creates an eraser mesh to block the printing of support in certain places"
msgstr ""

#: SupportEraser/plugin.json
msgctxt "name"
msgid "Support Eraser"
msgstr ""

#: Toolbox/plugin.json
msgctxt "description"
msgid "Find, manage and install new Cura packages."
msgstr ""

#: Toolbox/plugin.json
msgctxt "name"
msgid "Toolbox"
msgstr ""

#: TrimeshReader/plugin.json
msgctxt "description"
msgid "Provides support for reading model files."
msgstr ""

#: TrimeshReader/plugin.json
msgctxt "name"
msgid "Trimesh Reader"
msgstr ""

#: UFPReader/plugin.json
msgctxt "description"
msgid "Provides support for reading Ultimaker Format Packages."
msgstr ""

#: UFPReader/plugin.json
msgctxt "name"
msgid "UFP Reader"
msgstr ""

#: UFPWriter/plugin.json
msgctxt "description"
msgid "Provides support for writing Ultimaker Format Packages."
msgstr ""

#: UFPWriter/plugin.json
msgctxt "name"
msgid "UFP Writer"
msgstr ""

#: UltimakerMachineActions/plugin.json
msgctxt "description"
msgid ""
"Provides machine actions for Ultimaker machines (such as bed leveling "
"wizard, selecting upgrades, etc.)."
msgstr ""

#: UltimakerMachineActions/plugin.json
msgctxt "name"
msgid "Ultimaker machine actions"
msgstr ""

#: UM3NetworkPrinting/plugin.json
msgctxt "description"
msgid "Manages network connections to Ultimaker networked printers."
msgstr ""

#: UM3NetworkPrinting/plugin.json
msgctxt "name"
msgid "Ultimaker Network Connection"
msgstr ""

#: USBPrinting/plugin.json
msgctxt "description"
msgid ""
"Accepts G-Code and sends them to a printer. Plugin can also update firmware."
msgstr ""

#: USBPrinting/plugin.json
msgctxt "name"
msgid "USB printing"
msgstr ""

#: VersionUpgrade/VersionUpgrade21to22/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
msgstr ""

#: VersionUpgrade/VersionUpgrade21to22/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.1 to 2.2"
msgstr ""

#: VersionUpgrade/VersionUpgrade22to24/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
msgstr ""

#: VersionUpgrade/VersionUpgrade22to24/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.2 to 2.4"
msgstr ""

#: VersionUpgrade/VersionUpgrade25to26/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
msgstr ""

#: VersionUpgrade/VersionUpgrade25to26/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.5 to 2.6"
msgstr ""

#: VersionUpgrade/VersionUpgrade26to27/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
msgstr ""

#: VersionUpgrade/VersionUpgrade26to27/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.6 to 2.7"
msgstr ""

#: VersionUpgrade/VersionUpgrade27to30/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
msgstr ""

#: VersionUpgrade/VersionUpgrade27to30/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.7 to 3.0"
msgstr ""

#: VersionUpgrade/VersionUpgrade30to31/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
msgstr ""

#: VersionUpgrade/VersionUpgrade30to31/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.0 to 3.1"
msgstr ""

#: VersionUpgrade/VersionUpgrade32to33/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
msgstr ""

#: VersionUpgrade/VersionUpgrade32to33/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.2 to 3.3"
msgstr ""

#: VersionUpgrade/VersionUpgrade33to34/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
msgstr ""

#: VersionUpgrade/VersionUpgrade33to34/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.3 to 3.4"
msgstr ""

#: VersionUpgrade/VersionUpgrade34to35/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
msgstr ""

#: VersionUpgrade/VersionUpgrade34to35/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.4 to 3.5"
msgstr ""

#: VersionUpgrade/VersionUpgrade35to40/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
msgstr ""

#: VersionUpgrade/VersionUpgrade35to40/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.5 to 4.0"
msgstr ""

#: VersionUpgrade/VersionUpgrade40to41/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
msgstr ""

#: VersionUpgrade/VersionUpgrade40to41/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.0 to 4.1"
msgstr ""

#: VersionUpgrade/VersionUpgrade411to412/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.11 to Cura 4.12."
msgstr ""

#: VersionUpgrade/VersionUpgrade411to412/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.11 to 4.12"
msgstr ""

#: VersionUpgrade/VersionUpgrade41to42/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
msgstr ""

#: VersionUpgrade/VersionUpgrade41to42/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.1 to 4.2"
msgstr ""

#: VersionUpgrade/VersionUpgrade42to43/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
msgstr ""

#: VersionUpgrade/VersionUpgrade42to43/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.2 to 4.3"
msgstr ""

#: VersionUpgrade/VersionUpgrade43to44/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
msgstr ""

#: VersionUpgrade/VersionUpgrade43to44/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.3 to 4.4"
msgstr ""

#: VersionUpgrade/VersionUpgrade44to45/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
msgstr ""

#: VersionUpgrade/VersionUpgrade44to45/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.4 to 4.5"
msgstr ""

#: VersionUpgrade/VersionUpgrade45to46/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
msgstr ""

#: VersionUpgrade/VersionUpgrade45to46/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.5 to 4.6"
msgstr ""

#: VersionUpgrade/VersionUpgrade460to462/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
msgstr ""

#: VersionUpgrade/VersionUpgrade460to462/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.6.0 to 4.6.2"
msgstr ""

#: VersionUpgrade/VersionUpgrade462to47/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
msgstr ""

#: VersionUpgrade/VersionUpgrade462to47/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.6.2 to 4.7"
msgstr ""

#: VersionUpgrade/VersionUpgrade47to48/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
msgstr ""

#: VersionUpgrade/VersionUpgrade47to48/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.7 to 4.8"
msgstr ""

#: VersionUpgrade/VersionUpgrade48to49/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
msgstr ""

#: VersionUpgrade/VersionUpgrade48to49/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.8 to 4.9"
msgstr ""

#: VersionUpgrade/VersionUpgrade49to410/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
msgstr ""

#: VersionUpgrade/VersionUpgrade49to410/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.9 to 4.10"
msgstr ""

#: X3DReader/plugin.json
msgctxt "description"
msgid "Provides support for reading X3D files."
msgstr ""

#: X3DReader/plugin.json
msgctxt "name"
msgid "X3D Reader"
msgstr ""

#: XmlMaterialProfile/plugin.json
msgctxt "description"
msgid "Provides capabilities to read and write XML-based material profiles."
msgstr ""

#: XmlMaterialProfile/plugin.json
msgctxt "name"
msgid "Material Profiles"
msgstr ""

#: XRayView/plugin.json
msgctxt "description"
msgid "Provides the X-Ray view."
msgstr ""

#: XRayView/plugin.json
msgctxt "name"
msgid "X-Ray View"
msgstr ""