{
    "version": 2,
    "name": "Eazao Zero",
    "inherits": "fdmprinter",
    "metadata": 
  {
        "visible": true,
        "author": "Eazao",
        "manufacturer": "Eazao",
        "file_formats": "text/x-gcode",
        "has_materials": true,
        "has_machine_quality": false,
        "preferred_quality_type": "normal",
        "preferred_material": "generic_pla",
    
        "machine_extruder_trains":
        {
            "0": "eazao_zero_extruder_0"
        }  
  },
  "overrides":
    {
        "machine_name":
        {
            "default_value": "EAZAO Zero"
        },
        "machine_heated_bed":
        {
            "default_value": false
        },
        "machine_width":
        {
            "default_value": 150
        },
        "machine_depth":
        {
            "default_value": 150
        },
        "machine_height":
        {
            "default_value": 240
        },
        "machine_center_is_zero":
        {
            "default_value": false
        },
        "machine_gcode_flavor":
        {
            "default_value": "Marlin (Marlin/Sprinter)"
        },
        "machine_start_gcode":
        {
            "default_value": "G21 \nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 ;Home \nG1 Z15.0 F1500 ;move the platform down 15mm\nG92 E0 \nG1 F300 E10\nG92 E0\nM302\nM163 S0 P0.9; Set Mix Factor\nM163 S1 P0.1; Set Mix Factor\nM164 S0\n"
        },
        "machine_end_gcode":
        {
            "default_value": "G92 E10\nG1 E-10 F300\nG28 X0 Y0 ;move X Y to min endstops\nM82\nM84 ;steppers off\n"
        },
        "machine_max_feedrate_x": { "value": 100 },
        "machine_max_feedrate_y": { "value": 100 },
        "machine_max_feedrate_z": { "value": 5 },
        "machine_max_feedrate_e": { "value": 25 },

        "machine_max_acceleration_x": { "value": 500 },
        "machine_max_acceleration_y": { "value": 500 },
        "machine_max_acceleration_z": { "value": 50 },
        "machine_max_acceleration_e": { "value": 500 },
        "machine_acceleration": { "value": 300 },
        "acceleration_print": { "value": 300 },
        "acceleration_travel": { "value": 300 },
        "acceleration_enabled": { "value": false },

        "machine_max_jerk_xy": { "value": 10 },
        "machine_max_jerk_z": { "value": 0.3 },
        "machine_max_jerk_e": { "value": 5 },
        "jerk_print": { "value": 10 },
        "jerk_travel": { "value": "jerk_print" },
        "jerk_travel_layer_0": { "value": "jerk_travel" },
        "jerk_enabled": { "value": false },

        "layer_height": {"value":1.0},
        "layer_height_0": {"value":1.0},
        "line_width": {"value":3.0},
        
        "wall_thickness": {"value":3.0},
        "optimize_wall_printing_order": { "value": "True" },
        "travel_compensate_overlapping_walls_enabled": { "value": false},
        
        "top_bottom_thickness": {"value":0},
        "bottom_layers":{"value":2},
        "initial_bottom_layers":{"value":2},

        "infill_sparse_density": {"value":0},

        "material_print_temperature": { "value": "0" },
        "material_print_temperature_layer_0": { "value": "0" },
        "material_initial_print_temperature": { "value": "0" },
        "material_final_print_temperature": { "value": "0" },

        "speed_print": { "value": 20.0 },
        "speed_wall": { "value": 20.0 },
        "speed_wall_0": { "value": 20.0 },
        "speed_wall_x": { "value": 20.0 },
        "speed_travel": { "value": 20.0 },
        "speed_z_hop": { "value": "machine_max_feedrate_z" },
             
        "retraction_hop_enabled": { "value": false },
        "retraction_hop": { "value": 0.2 },
        "retraction_combing": { "value": "'noskin'" },
        "retraction_combing_max_distance": { "value": 0 },

        "travel_avoid_other_parts": { "value": true },
        "travel_avoid_supports": { "value": false },
        "travel_retract_before_outer_wall": { "value": false },

        "retraction_enable": { "value": false },
        "retraction_speed": { "value": 25 },
        "retraction_amount": { "value": 7 },
        "retraction_count_max": { "value": 100 },
        "retraction_extrusion_window": { "value": 10 },
        
        "cool_fan_enabled": { "value": false },
        
        "adhesion_type": { "default_value": "none" }

    }
}