{
    "version": 2,
    "name": "WEEFUN TINA2S",
    "inherits": "weedo_base",
    "metadata":
    {
        "visible": true,
        "author": "WEEFUN",
        "manufacturer": "WEEFUN",
        "file_formats": "text/x-gcode",
        "platform_offset": [
            0,
            0,
            0
        ]
    },
    "overrides":
    {
        "gantry_height": { "value": 20 },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 120 },
        "machine_end_gcode": { "default_value": ";(**** end.gcode for tina2s****)\nM203 Z15 ;Move Z axis up 5mm\nM104 S0 ;Turn off extruder heating\nM140 S0 ;Turn off bed heating\nM107 ;Turn Fans off\nG92 E0 ;(Reset after prime)\nG0 E-1 F300 ;Retract Fillament 1mm\nG28 Z F300 ;Park Hotend up\nG28 X0 Y0 ;Park Hotend\nG1 Y90 F1000 ;Present finished model\nG0 E-2 F300 ;Retract Fillament 2mm\nM82 ;absolute extrusion mode\nM104 S0 ;Ensure hotend is off\nM117 Print Complete" },
        "machine_extruder_count": { "default_value": 1 },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 100 },
        "machine_name": { "default_value": "WEEFUN TINA2S" },
        "machine_start_gcode": { "default_value": ";MachineType:TINA2S\n;FilamentType:{material_type}\n;Layer height:{layer_height}\n;Extruder0Temperature:{material_print_temperature}\n;BedTemperature:{material_bed_temperature}\n;InfillDensity:{infill_sparse_density}\n;(**** start.gcode for tina2s****)\nM203 Z5 ;Move Z axis up 5mm\nM117 Homing axes\nG28 Z; Home extruder axis Z\nG28 X Y; Home extruder axis X Y\nM117 Start Warm Up\nM140 S{material_bed_temperature} ;start heating the bed to what is set in Cura\nM104 S130 ;start heating E to 130 for preheat\nM190 S{material_bed_temperature} ;Wait for Bed Temperature\nM117 Levling the build plate\nG29\nG1 Z1.0 F3000 ;Move Z Axis up to 1mm\nG1 X0.5 Y1 ;Move hotend to starting position\nM117 Heating Hotend\nM104 S{material_initial_print_temperature} T0 ;start heating T0 to what is set in Cura\nM109 S{material_initial_print_temperature} T0 ;Wait for Hotend Temperature\nG92 E0 ;Reset Extruder\nM117 Purging and cleaning nozzle\nG1 X1.1 Y10 Z0.28 F1000.0 ;Move to start position\nG1 X1.1 Y90.0 Z0.28 F2000.0 E15 ;Draw the first line\nG1 X1.4 Y90.0 Z0.23 F5000.0 ;Move to side a little\nG1 X1.4 Y10 Z0.20 F2000.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X1 Y5 Z0.2 F5000.0 ;Move over to prevent blob squish\nM117 Printing..." },
        "machine_width": { "default_value": 100 },
        "retraction_amount": { "default_value": 3 },
        "speed_infill": { "value": 40.0 },
        "speed_print_layer_0": { "value": 22.0 },
        "speed_roofing": { "value": 25.0 },
        "speed_support_bottom": { "dvalue": 30.0 },
        "speed_support_infill": { "value": 45.0 },
        "speed_support_roof": { "value": 30.0 },
        "speed_topbottom": { "value": 30.0 },
        "speed_travel_layer_0": { "value": 60 },
        "speed_wall_0": { "value": 20.0 },
        "speed_wall_x": { "value": 25.0 }
    }
}