{
    "version": 2,
    "name": "Trimaker Cosmos II",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Trimaker",
        "manufacturer": "Trimaker",
        "file_formats": "text/x-gcode",
        "platform": "trimaker_cosmosII_platform.stl",
        "exclude_materials": [
            "dsm_arnitel2045",
            "dsm_novamid1070",
            "generic_abs",
            "generic_cpe",
            "generic_hips",
            "generic_nylon",
            "generic_pc",
            "generic_petg",
            "generic_pla",
            "generic_pva",
            "generic_tpu",
            "imade3d_petg",
            "imade3d_pla",
            "innofill_innoflex60",
            "verbatim_bvoh"
        ],
        "has_machine_quality": true,
        "has_materials": true,
        "machine_extruder_trains": { "0": "trimaker_cosmosII_extruder" },
        "platform_offset": [
            -110.5,
            -28.3,
            134
        ],
        "preferred_material": "redd_pla",
        "preferred_quality_type": "normal"
    },
    "overrides":
    {
        "adhesion_type": { "default_value": "skirt" },
        "cool_fan_enabled": { "default_value": true },
        "cool_fan_speed": { "value": "100.0 if cool_fan_enabled else 0.0" },
        "default_material_bed_temperature": { "default_value": 60 },
        "default_material_print_temperature": { "default_value": 200 },
        "gantry_height": { "value": 2 },
        "infill_pattern": { "value": "'grid'" },
        "infill_sparse_density": { "default_value": 25 },
        "infill_sparse_thickness": { "value": "resolveOrValue('layer_height')" },
        "layer_height": { "default_value": 0.2 },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 200 },
        "machine_end_gcode": { "default_value": ";CODIGO FINAL\n M107; Fan off\n G90; Set to absolute positioning\n G1 X0 Y0 Z201; Get extruder out of way\n G92 E0; Reset extruder position\n G1 E-1; Reduce filament pressure\n G92 E0; Reset extruder position again\n M140 S0; Disable heated bed\n M104 S0; Disable extruder\n M84; Turn steppers off" },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 200 },
        "machine_name": { "default_value": "Trimaker Cosmos II" },
        "machine_start_gcode": { "default_value": ";Start GCode - Cosmos II - 3.x.x_SEGcTK_1.1\n M104 S120; Comienzo a calentar extrusor\n G21; Unidades en mm\n G90; absolute positioning\n M82; set extruder to absolute mode\n M107; Apagar FAN\n G28; Home\n M190 S{material_bed_temperature_layer_0}\n G29; Senso la cama\n M500\n G1 F5000 X0.5 Y0.5\n M109 S{material_print_temperature}\n M900 K0.04\n G1 F200 Z10\n G92 E0; Defino cero en la posici\u00f3n del actual del extrusor\n G1 F200 X0.5 Y0.5 Z0.300; Posiciono antes de hacer una l\u00ednea\n G1 F900 X0.5 Y51.5 E2.56436; Hago una l\u00ednea\n " },
        "machine_width": { "default_value": 200 },
        "material_diameter": { "default_value": 1.75 },
        "material_flow": { "value": 100 },
        "retraction_amount": { "default_value": 1 },
        "retraction_enable": { "default_value": true },
        "retraction_speed": { "default_value": 45 },
        "speed_print": { "default_value": 45 },
        "speed_travel": { "value": "speed_print if magic_spiralize else 100" },
        "speed_wall_0": { "value": 35 },
        "speed_wall_x": { "value": 45 },
        "support_angle": { "default_value": 50 },
        "support_enable": { "default_value": true },
        "support_pattern": { "default_value": "zigzag" },
        "support_type": { "default_value": "everywhere" },
        "support_xy_distance": { "default_value": 0.7 },
        "support_z_distance": { "default_value": 0.17 },
        "top_bottom_thickness": { "value": "layer_height * 6" },
        "wall_thickness": { "value": "line_width * 3" },
        "xy_offset": { "default_value": 0 },
        "xy_offset_layer_0": { "value": -0.1 }
    }
}