{
    "version": 2,
    "name": "Sovol SV06",
    "inherits": "sovol_base_planetary",
    "metadata":
    {
        "visible": true,
        "quality_definition": "sovol_base_planetary"
    },
    "overrides":
    {
        "gantry_height": { "value": 25 },
        "infill_pattern": { "value": "'lines'" },
        "infill_sparse_density": { "value": 15 },
        "machine_depth": { "default_value": 220 },
        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X0 Y240 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-44, 16],
                [-44, -60],
                [44, -60],
                [44, 16]
            ]
        },
        "machine_height": { "default_value": 250 },
        "machine_name": { "default_value": "SV06" },
        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\nM420 S1 ;use bed mesh, must have used G29 previously\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
        "machine_width": { "default_value": 220 },
        "retraction_hop": { "value": "2 * layer_height" },
        "retraction_hop_enabled": { "value": true },
        "skirt_brim_speed": { "value": "speed_layer_0" },
        "speed_infill": { "value": "speed_print" },
        "speed_print": { "value": 60.0 },
        "speed_travel": { "value": 200 },
        "speed_wall": { "value": "speed_print / 2" },
        "speed_wall_0": { "value": "speed_wall / 1.2" },
        "speed_wall_x": { "value": "speed_wall" },
        "wall_thickness": { "value": 1.2 },
        "z_seam_type": { "value": "'back'" }
    }
}