{
    "version": 2,
    "name": "Renkforce RF100 XL",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Simon Peter (based on RF100.ini by Conrad Electronic SE)",
        "manufacturer": "Renkforce",
        "file_formats": "text/x-gcode",
        "machine_extruder_trains": { "0": "renkforce_rf100_xl_extruder_0" }
    },
    "overrides":
    {
        "adhesion_type": { "default_value": "skirt" },
        "bottom_thickness": { "value": 0.6 },
        "brim_width": { "value": 3.0 },
        "cool_fan_enabled": { "value": true },
        "cool_fan_full_at_height": { "value": 0.5 },
        "cool_fan_speed_max": { "value": 100.0 },
        "cool_fan_speed_min": { "value": 100.0 },
        "cool_lift_head": { "value": true },
        "cool_min_layer_time": { "value": 1.0 },
        "cool_min_speed": { "value": 5.0 },
        "infill_before_walls": { "value": true },
        "infill_line_width": { "value": 0.6 },
        "infill_overlap": { "value": 15.0 },
        "infill_sparse_density": { "value": 26.0 },
        "ironing_enabled": { "value": true },
        "layer_0_z_overlap": { "value": 0.11 },
        "layer_height_0": { "value": 0.3 },
        "machine_depth": { "value": 200 },
        "machine_end_gcode": { "default_value": ";End GCode\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-4 F300 ;move Z up a bit and retract filament even more\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG0 Z{machine_height} F1800 ;move the platform all the way down\nG28 X0 Y0 F1800 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nM117 Done" },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "value": 200 },
        "machine_name": { "default_value": "Renkforce RF100 XL" },
        "machine_start_gcode": { "default_value": ";Sliced at: {day} {date} {time}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG1 Z5.0 F1800 ;move Z to 5mm\nG28 X0 Y0 F1800 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstop\nG92 E0 ;zero the extruded length\nG1 F200 E6.0 ;extrude 6.0mm of feed stock to build pressure\nG1 Z5.0 F300 ;move the platform down 5mm\nG92 E0 ;zero the extruded length again\nG1 F1800\n;Put printing message on LCD screen\nM117 Printing..." },
        "machine_width": { "value": 200 },
        "material_bed_temperature": { "value": 70 },
        "ooze_shield_enabled": { "value": true },
        "raft_airgap": { "value": 0.33 },
        "raft_base_line_spacing": { "value": 3.0 },
        "raft_base_line_width": { "value": 1.0 },
        "raft_base_thickness": { "value": 0.3 },
        "raft_interface_line_spacing": { "value": 3.0 },
        "raft_interface_line_width": { "value": 0.4 },
        "raft_interface_thickness": { "value": 0.27 },
        "raft_margin": { "value": 6.0 },
        "raft_speed": { "value": 20.0 },
        "raft_surface_layers": { "value": 2 },
        "raft_surface_line_spacing": { "value": 0.4 },
        "raft_surface_line_width": { "value": 0.4 },
        "raft_surface_thickness": { "value": 0.1 },
        "retraction_amount": { "value": 5.0 },
        "retraction_combing": { "value": "all" },
        "retraction_enable": { "value": true },
        "retraction_min_travel": { "value": 1.5 },
        "skin_overlap": { "value": 15.0 },
        "skirt_brim_minimal_length": { "value": 150.0 },
        "skirt_gap": { "value": 3.0 },
        "skirt_line_count": { "value": 3 },
        "speed_infill": { "value": 50.0 },
        "speed_layer_0": { "value": 15.0 },
        "speed_print": { "value": 50.0 },
        "speed_topbottom": { "value": 30.0 },
        "speed_travel": { "value": 50.0 },
        "speed_wall_0": { "value": 25.0 },
        "speed_wall_x": { "value": 35.0 },
        "support_angle": { "value": 60.0 },
        "support_enable": { "value": false },
        "support_infill_rate": { "value": "15 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 15" },
        "support_line_width": { "value": 0.6 },
        "support_pattern": { "default_value": "lines" },
        "support_type": { "default_value": "everywhere" },
        "support_xy_distance": { "value": 0.7 },
        "support_z_distance": { "value": 0.35 },
        "top_bottom_thickness": { "value": 0.8 },
        "wall_thickness": { "value": 0.8 }
    }
}