{
    "version": 2,
    "name": "Kupido",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Kupido",
        "manufacturer": "Kati Hal ARGE",
        "file_formats": "text/x-gcode",
        "exclude_materials": [
            "dsm_arnitel2045",
            "dsm_novamid1070",
            "generic_cpe",
            "generic_hips",
            "generic_nylon",
            "generic_pc",
            "generic_petg",
            "generic_pva",
            "generic_tpu",
            "innofill_innoflex60",
            "verbatim_bvoh"
        ],
        "has_machine_quality": true,
        "has_materials": true,
        "has_variants": false,
        "machine_extruder_trains": { "0": "kupido_extruder_0" },
        "platform_offset": [
            0,
            0,
            0
        ],
        "preferred_material": "generic_pla",
        "supports_usb_connection": false
    },
    "overrides":
    {
        "adhesion_type":
        {
            "default_value": "raft",
            "options":
            {
                "brim": "Brim",
                "none": "None",
                "raft": "Raft"
            }
        },
        "gantry_height": { "value": "55" },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 195 },
        "machine_end_gcode": { "default_value": ";End GCode\nM104 S0 ;extruder heater off \nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}" },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [75, 18],
                [18, 18],
                [18, 35],
                [75, 35]
            ]
        },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 190 },
        "machine_name": { "default_value": "KUPIDO" },
        "machine_start_gcode": { "default_value": ";Sliced at: {day} {date} {time} \n ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} \n ;Print time: {print_time} \n ;Filament used: {filament_amount}m {filament_weight}g \n ;Filament cost: {filament_cost} \n G28 X0 Y0  ;move X Y to endstops \n G28 Z0     ;move Z to endstops \n M190 S{material_bed_temperature} ;bed temp \n M107 ; switch fan off \n M109 S{material_print_temperature} ;extruder temp set \n G1 F3000 \n G1 Z10 \n G92 E0                  ;zero the extruded length \n G1 F200 E1 ;extrude 1mm of feed stock \n G92 E0 ;zero the extruded length again \n  G4 P7000 ; wait 7000ms \n M117 Printing... ;Put printing message on LCD screen" },
        "machine_width": { "default_value": 195 },
        "retraction_amount": { "default_value": 1 },
        "support_enable": { "default_value": true }
    }
}