{
    "version": 2,
    "name": "Geeetech Thunder",
    "inherits": "Geeetech_Base_Single_Extruder",
    "metadata":
    {
        "visible": true,
        "machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
    },
    "overrides":
    {
        "acceleration_print": { "value": 3500 },
        "acceleration_travel": { "value": 5000 },
        "cool_fan_full_at_height":
        {
            "label": "Regular Fan Speed at Height",
            "value": "layer_height_0 +  layer_height"
        },
        "cool_fan_speed":
        {
            "maximum_value": "151",
            "value": "151 if speed_infill>=200  else 100"
        },
        "cool_fan_speed_max":
        {
            "maximum_value": "151",
            "value": "cool_fan_speed"
        },
        "cool_fan_speed_min":
        {
            "maximum_value": "151",
            "value": "cool_fan_speed"
        },
        "cool_min_layer_time": { "value": "1.3 if speed_infill>=200  else 2.5" },
        "fill_outline_gaps":
        {
            "label": "Print Thin Walls",
            "value": false
        },
        "gantry_height": { "value": 35 },
        "infill_before_walls":
        {
            "label": "Infill Before Walls",
            "value": false
        },
        "infill_overlap":
        {
            "label": "Infill Overlap Percentage",
            "value": 10.0
        },
        "infill_sparse_density":
        {
            "label": "Infill Density",
            "value": "15"
        },
        "infill_wipe_dist":
        {
            "label": "Infill Wipe Distance",
            "value": 0.0
        },
        "line_width": { "value": "1.2*machine_nozzle_size if speed_infill>=200 else machine_nozzle_size" },
        "machine_depth": { "default_value": 250 },
        "machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-20, 25],
                [20, 25],
                [20, -25],
                [-20, -25]
            ]
        },
        "machine_height": { "default_value": 260 },
        "machine_max_acceleration_e": { "value": 3500 },
        "machine_max_acceleration_x": { "value": 5000 },
        "machine_max_acceleration_y": { "value": 4000 },
        "machine_max_acceleration_z": { "value": 50 },
        "machine_max_feedrate_e": { "value": 60 },
        "machine_max_feedrate_x": { "value": 300 },
        "machine_max_jerk_e": { "value": 8 },
        "machine_max_jerk_xy": { "value": 45 },
        "machine_max_jerk_z": { "value": 0.8 },
        "machine_name": { "default_value": "Geeetech Thunder" },
        "machine_start_gcode": { "default_value": ";Official viki homepage for Thunder:https://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer  \n\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
        "machine_width": { "default_value": 250 },
        "material_flow_layer_0": { "value": 95 },
        "material_print_temperature":
        {
            "maximum_value": "250",
            "value": "200 if speed_infill <=150 else 205 if speed_infill <= 200 else 215 if speed_infill <= 260 else 220"
        },
        "material_print_temperature_layer_0":
        {
            "maximum_value_warning": 300,
            "value": "material_print_temperature"
        },
        "retraction_speed": { "value": 35 },
        "skin_overlap":
        {
            "label": "Skin Overlap Percentage",
            "value": 10.0
        },
        "small_hole_max_size": { "value": "8 if speed_infill>=200  else 0" },
        "speed_infill": { "maximum_value_warning": "300" },
        "speed_print":
        {
            "maximum_value_warning": "300",
            "value": 250
        },
        "speed_roofing": { "maximum_value_warning": "300" },
        "speed_support": { "maximum_value_warning": "200" },
        "speed_support_bottom": { "maximum_value_warning": "200" },
        "speed_support_infill": { "maximum_value_warning": "200" },
        "speed_support_interface": { "maximum_value_warning": "200" },
        "speed_support_roof": { "maximum_value_warning": "200" },
        "speed_topbottom": { "maximum_value_warning": "300" },
        "speed_travel_layer_0": { "maximum_value_warning": "200" },
        "speed_wall": { "maximum_value_warning": "300" },
        "speed_wall_0": { "maximum_value_warning": "300" },
        "speed_wall_x": { "maximum_value_warning": "300" },
        "wall_0_wipe_dist":
        {
            "label": "Outer Wall Wipe Distance",
            "value": 0.0
        },
        "zig_zaggify_infill":
        {
            "label": "Connect Infill Lines",
            "value": true
        }
    }
}