{ "version": 2, "name": "Strateo3D", "inherits": "fdmprinter", "metadata": { "author": "eMotionTech", "manufacturer": "eMotionTech", "visible": true, "file_formats": "text/x-gcode", "has_machine_quality": true, "has_materials": true, "has_variants": true, "preferred_variant_name": "Standard 0.6", "preferred_material": "emotiontech_pla", "preferred_quality_type": "c", "variants_name": "Print Head", "machine_extruder_trains": { "0": "strateo3d_right_extruder", "1": "strateo3d_left_extruder" } }, "overrides": { "machine_name": { "default_value": "Strateo3D" }, "machine_width": { "default_value": 600 }, "machine_depth": { "default_value": 420 }, "machine_height": { "default_value": 495 }, "machine_heated_bed": { "default_value": true }, "machine_heated_build_volume": { "default_value": true }, "machine_center_is_zero": { "default_value": false }, "machine_head_with_fans_polygon": { "default_value": [ [ -76, -51.8 ] , [ 25, -51.8 ] , [ 25, 38.2 ] , [ -76, 38.2 ] ] }, "gantry_height": { "value": "40" }, "machine_extruder_count": { "default_value": 2 }, "machine_gcode_flavor": { "default_value": "Marlin" }, "machine_start_gcode": { "default_value": "G28 \nG90 G1 X300 Y210 Z15 F6000 \nG92 E0" }, "machine_end_gcode": { "default_value": "T1 \nM104 S0 \nT0 \nM104 S0 \nM140 S0 \nM141 S0 \nG91 \nG0 z1 \nG90 \nG28 \nM801.0 \nM84 \nM192" }, "extruder_prime_pos_y": {"minimum_value": "0", "maximum_value": "machine_depth"}, "extruder_prime_pos_x": {"minimum_value": "0", "maximum_value": "machine_width"}, "machine_heat_zone_length": { "default_value": 7 }, "default_material_print_temperature": { "maximum_value_warning": "350" }, "material_print_temperature": { "maximum_value_warning": "350" }, "material_print_temperature_layer_0": { "maximum_value_warning": "350" }, "material_bed_temperature": { "maximum_value": "130" }, "material_bed_temperature_layer_0": { "maximum_value": "130" }, "extruder_prime_pos_abs": { "default_value": true }, "machine_acceleration": { "default_value": 1500 }, "acceleration_enabled": { "value": false }, "acceleration_print": { "value": "machine_acceleration" }, "acceleration_wall": { "value": "math.ceil(acceleration_print * 1250 / acceleration_print)" }, "acceleration_wall_0": { "value": "math.ceil(acceleration_print * 1000 / acceleration_print)" }, "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1250 / acceleration_print)" }, "acceleration_support": { "value": "acceleration_print" }, "acceleration_support_interface": { "value": "acceleration_topbottom" }, "acceleration_travel": { "value": "acceleration_print" }, "acceleration_layer_0": { "value": "acceleration_topbottom" }, "adaptive_layer_height_variation": { "default_value": 0.1 }, "adaptive_layer_height_variation_step": { "default_value": 0.05 }, "adhesion_type": { "default_value": "skirt" }, "expand_skins_expand_distance": { "value": "wall_line_width_0 + wall_line_count * wall_line_width_x" }, "gradual_infill_step_height": { "value": "layer_height*10" }, "gradual_support_infill_step_height": { "value": "layer_height*7" }, "infill_before_walls": { "default_value": false }, "infill_overlap": { "value": "0" }, "infill_wipe_dist": { "value": "0" }, "jerk_enabled": { "value": "False" }, "jerk_layer_0": { "value": "jerk_topbottom" }, "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" }, "jerk_print": { "value": "25" }, "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" }, "jerk_support_interface": { "value": "jerk_topbottom" }, "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" }, "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" }, "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" }, "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, "machine_min_cool_heat_time_window": { "value": "15" }, "machine_nozzle_cool_down_speed": { "default_value": 0.50 }, "machine_nozzle_heat_up_speed": { "default_value": 2.25 }, "material_final_print_temperature": { "value": "material_print_temperature - 10" }, "material_flow": { "default_value": 93 }, "material_flow_layer_0": { "value": "math.ceil(material_flow*1)" }, "material_initial_print_temperature": { "value": "material_print_temperature - 5" }, "meshfix_maximum_resolution": { "value": "0.5" }, "meshfix_maximum_deviation": { "default_value": 0.04 }, "optimize_wall_printing_order": { "value": "True" }, "prime_blob_enable": { "enabled": false, "default_value": false }, "prime_tower_min_volume": { "default_value": 35 }, "prime_tower_position_x": { "value": "machine_width/2 - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" }, "prime_tower_position_y": { "value": "machine_depth - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" }, "retraction_amount": { "default_value": 1.5 }, "retraction_combing": { "default_value": "all" }, "retraction_combing_max_distance": { "default_value": 5 }, "retraction_count_max": { "default_value": 15 }, "retraction_hop": { "value": "2" }, "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, "retraction_hop_only_when_collides": { "value": "True" }, "retraction_min_travel": { "value": "3*line_width" }, "retraction_prime_speed": { "value": "retraction_speed-10" }, "retraction_speed": { "default_value": 25 }, "skin_overlap": { "value": "10" }, "skirt_brim_minimal_length": { "default_value": 333 }, "speed_layer_0": { "value": "20" }, "speed_travel_layer_0": { "value": "100" }, "speed_prime_tower": { "value": "speed_topbottom" }, "speed_print": { "value": "50" }, "speed_support": { "value": "speed_wall" }, "speed_support_interface": { "value": "speed_topbottom" }, "speed_topbottom": { "value": "math.ceil(speed_print * 20/35)" }, "speed_travel": { "value": "150" }, "speed_wall": { "value": "math.ceil(speed_print * 3/4)" }, "speed_wall_0": { "value": "math.ceil(speed_wall * 2/3)" }, "speed_wall_x": { "value": "speed_wall" }, "support_angle": { "value": "50" }, "support_bottom_distance": {"value": "extruderValue(support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr, 'support_z_distance/2') if support_type == 'everywhere' else 0", "maximum_value_warning": "machine_nozzle_size*1.5" }, "support_interface_enable": { "default_value": true }, "support_interface_height": { "value": "layer_height*3" }, "support_interface_offset": { "value": "support_offset" }, "support_top_distance": {"value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance')", "maximum_value_warning": "machine_nozzle_size*1.5" }, "support_use_towers": { "default_value": true }, "support_xy_distance": { "value": "line_width * 1.7" }, "support_xy_distance_overhang": { "value": "wall_line_width_0" }, "support_z_distance": { "value": "layer_height*2", "maximum_value_warning": "machine_nozzle_size*1.5" }, "switch_extruder_prime_speed": { "value": "retraction_prime_speed" }, "switch_extruder_retraction_amount": { "value": "7" }, "switch_extruder_retraction_speeds": {"value": "retraction_retract_speed"}, "top_bottom_thickness": { "value": "3*layer_height", "minimum_value_warning": "layer_height*2" }, "top_thickness": { "value": "top_bottom_thickness" }, "top_layers": { "value": "0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))"}, "bottom_thickness": { "value": "top_bottom_thickness-2*layer_height+layer_height_0" }, "bottom_layers": { "value": "999999 if infill_sparse_density == 100 else math.ceil(round(((bottom_thickness-resolveOrValue('layer_height_0')) / resolveOrValue('layer_height'))+1, 4))"}, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, "wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" } } }