{
    "version": 2,
    "name": "Lotmaxx Shark",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "lotmaxx.com",
        "manufacturer": "Lotmaxx",
        "platform": "lotmaxx_sc_10_20_platform.3mf",
        "has_materials": true,
        "machine_extruder_trains":
        {
            "0": "lotmaxx_sc60_extruder_left",
            "1": "lotmaxx_sc60_extruder_right"
        },
        "preferred_quality_type": "normal"
    },
    "overrides":
    {
        "acceleration_print": { "value": 1000 },
        "acceleration_travel": { "value": 1000 },
        "acceleration_travel_layer_0": { "value": 1000.0 },
        "adhesion_type": { "default_value": "skirt" },
        "expand_skins_expand_distance": { "value": 0.8 },
        "fill_outline_gaps": { "default_value": false },
        "gantry_height": { "value": 29 },
        "infill_sparse_density": { "value": 15 },
        "machine_depth": { "default_value": 235 },
        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-50.7, 16.8],
                [-50.7, -29.5],
                [46.9, -29.5],
                [49.9, 16.8]
            ]
        },
        "machine_heated_bed": { "value": true },
        "machine_height": { "default_value": 265 },
        "machine_name": { "default_value": "Lotmaxx Shark" },
        "machine_start_gcode": { "default_value": "G28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
        "machine_width": { "default_value": 235 },
        "meshfix_maximum_resolution": { "value": 0.25 },
        "optimize_wall_printing_order": { "value": true },
        "prime_tower_min_volume": { "value": 30 },
        "prime_tower_mode": { "value": "'normal'" },
        "retract_at_layer_change": { "value": false },
        "retraction_amount": { "value": 4.5 },
        "roofing_layer_count": { "value": 1 },
        "skin_preshrink": { "value": 0.8 },
        "speed_layer_0": { "value": 30 },
        "speed_print": { "value": 45 },
        "speed_roofing": { "value": 35 },
        "speed_topbottom": { "value": 35 },
        "speed_travel": { "value": 80 },
        "speed_wall_0": { "value": 32 },
        "speed_wall_x": { "value": 32 },
        "support_infill_rate": { "value": 5 },
        "support_pattern": { "default_value": "lines" },
        "switch_extruder_retraction_amount": { "value": 100 },
        "switch_extruder_retraction_speeds": { "value": 60 },
        "wall_overhang_speed_factor": { "value": 50 },
        "z_seam_corner": { "default_value": "z_seam_corner_any" },
        "z_seam_relative": { "value": true },
        "z_seam_type": { "default_value": "sharpest_corner" },
        "zig_zaggify_infill": { "value": true }
    }
}