# Cura # Copyright (C) 2022 UltiMaker. # This file is distributed under the same license as the Cura package. # Ultimaker , 2022. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: nl_NL\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" #: cura/API/Account.py:199 msgctxt "@info:title" msgid "Login failed" msgstr "Inloggen mislukt" #: cura/Arranging/ArrangeObjectsJob.py:25 msgctxt "@info:status" msgid "Finding new location for objects" msgstr "Nieuwe locatie vinden voor objecten" #: cura/Arranging/ArrangeObjectsJob.py:29 msgctxt "@info:title" msgid "Finding Location" msgstr "Locatie vinden" #: cura/Arranging/ArrangeObjectsJob.py:42 cura/MultiplyObjectsJob.py:99 msgctxt "@info:status" msgid "Unable to find a location within the build volume for all objects" msgstr "Kan binnen het werkvolume niet voor alle objecten een locatie vinden" #: cura/Arranging/ArrangeObjectsJob.py:43 msgctxt "@info:title" msgid "Can't Find Location" msgstr "Kan locatie niet vinden" #: cura/Backups/Backup.py:115 msgctxt "@info:backup_failed" msgid "Could not create archive from user data directory: {}" msgstr "Kan geen archief maken van gegevensmap van gebruiker: {}" #: cura/Backups/Backup.py:122 cura/Backups/Backup.py:159 #: plugins/CuraDrive/src/DrivePluginExtension.py:118 #: plugins/CuraDrive/src/DrivePluginExtension.py:126 msgctxt "@info:title" msgid "Backup" msgstr "Back-up" #: cura/Backups/Backup.py:134 msgctxt "@info:backup_failed" msgid "Tried to restore a Cura backup without having proper data or meta data." msgstr "Geprobeerd een Cura-back-up te herstellen zonder correcte gegevens of metadata." #: cura/Backups/Backup.py:145 msgctxt "@info:backup_failed" msgid "Tried to restore a Cura backup that is higher than the current version." msgstr "Geprobeerd een Cura-back-up te herstellen van een versie die hoger is dan de huidige versie." #: cura/Backups/Backup.py:158 msgctxt "@info:backup_failed" msgid "The following error occurred while trying to restore a Cura backup:" msgstr "De volgende fout is opgetreden bij het herstellen van een Cura-backup:" #: cura/BuildVolume.py:100 msgctxt "@info:status" msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models." msgstr "De hoogte van het bouwvolume is verminderd wegens de waarde van de instelling \"Printvolgorde\", om te voorkomen dat de rijbrug tegen geprinte modellen botst." #: cura/BuildVolume.py:103 msgctxt "@info:title" msgid "Build Volume" msgstr "Werkvolume" #: cura/CrashHandler.py:107 msgctxt "@title:window" msgid "Cura can't start" msgstr "Cura kan niet worden gestart" #: cura/CrashHandler.py:113 msgctxt "@label crash message" msgid "" "

Oops, UltiMaker Cura has encountered something that doesn't seem right.

\n" "

We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.

\n" "

Backups can be found in the configuration folder.

\n" "

Please send us this Crash Report to fix the problem.

\n" " " msgstr "" "

Oeps, UltiMaker Cura heeft een probleem gedetecteerd.

\n" "

Tijdens het opstarten is een onherstelbare fout opgetreden. Deze fout is mogelijk veroorzaakt door enkele onjuiste configuratiebestanden. Het wordt aanbevolen een back-up te maken en de standaardinstelling van uw configuratie te herstellen.

\n" "

Back-ups bevinden zich in de configuratiemap.

\n" "

Stuur ons dit crashrapport om het probleem op te lossen.

\n" " " #: cura/CrashHandler.py:122 msgctxt "@action:button" msgid "Send crash report to UltiMaker" msgstr "Het crashrapport naar UltiMaker verzenden" #: cura/CrashHandler.py:125 msgctxt "@action:button" msgid "Show detailed crash report" msgstr "Gedetailleerd crashrapport weergeven" #: cura/CrashHandler.py:129 msgctxt "@action:button" msgid "Show configuration folder" msgstr "Open Configuratiemap" #: cura/CrashHandler.py:140 msgctxt "@action:button" msgid "Backup and Reset Configuration" msgstr "Back-up maken en herstellen van configuratie" #: cura/CrashHandler.py:171 msgctxt "@title:window" msgid "Crash Report" msgstr "Crashrapport" #: cura/CrashHandler.py:190 msgctxt "@label crash message" msgid "" "

A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem

\n" "

Please use the \"Send report\" button to post a bug report automatically to our servers

\n" " " msgstr "" "

Er is een fatale fout opgetreden in Cura. Stuur ons het crashrapport om het probleem op te lossen

\n" "

Druk op de knop "Rapport verzenden" om het foutenrapport automatisch naar onze servers te verzenden

\n" " " #: cura/CrashHandler.py:198 msgctxt "@title:groupbox" msgid "System information" msgstr "Systeeminformatie" #: cura/CrashHandler.py:207 msgctxt "@label unknown version of Cura" msgid "Unknown" msgstr "Onbekend" #: cura/CrashHandler.py:228 msgctxt "@label Cura version number" msgid "Cura version" msgstr "Cura-versie" #: cura/CrashHandler.py:229 msgctxt "@label" msgid "Cura language" msgstr "Taal van Cura" #: cura/CrashHandler.py:230 msgctxt "@label" msgid "OS language" msgstr "Taal van besturingssysteem" #: cura/CrashHandler.py:231 msgctxt "@label Type of platform" msgid "Platform" msgstr "Platform" #: cura/CrashHandler.py:232 msgctxt "@label" msgid "Qt version" msgstr "Qt version" #: cura/CrashHandler.py:233 msgctxt "@label" msgid "PyQt version" msgstr "PyQt version" #: cura/CrashHandler.py:234 msgctxt "@label OpenGL version" msgid "OpenGL" msgstr "OpenGL" #: cura/CrashHandler.py:264 msgctxt "@label" msgid "Not yet initialized" msgstr "Nog niet geïnitialiseerd" #: cura/CrashHandler.py:267 #, python-brace-format msgctxt "@label OpenGL version" msgid "
  • OpenGL Version: {version}
    • " msgstr "
  • OpenGL-versie: {version}
    • " #: cura/CrashHandler.py:268 #, python-brace-format msgctxt "@label OpenGL vendor" msgid "
  • OpenGL Vendor: {vendor}
    • " msgstr "
  • OpenGL-leverancier: {vendor}
    • " #: cura/CrashHandler.py:269 #, python-brace-format msgctxt "@label OpenGL renderer" msgid "
  • OpenGL Renderer: {renderer}
    • " msgstr "
  • OpenGL-renderer: {renderer}
    • " #: cura/CrashHandler.py:304 msgctxt "@title:groupbox" msgid "Error traceback" msgstr "Traceback van fout" #: cura/CrashHandler.py:390 msgctxt "@title:groupbox" msgid "Logs" msgstr "Logboeken" #: cura/CrashHandler.py:418 msgctxt "@action:button" msgid "Send report" msgstr "Rapport verzenden" #: cura/CuraApplication.py:540 msgctxt "@info:progress" msgid "Loading machines..." msgstr "Machines laden..." #: cura/CuraApplication.py:547 msgctxt "@info:progress" msgid "Setting up preferences..." msgstr "Voorkeuren instellen..." #: cura/CuraApplication.py:692 msgctxt "@info:progress" msgid "Initializing Active Machine..." msgstr "Actieve machine initialiseren ..." #: cura/CuraApplication.py:839 msgctxt "@info:progress" msgid "Initializing machine manager..." msgstr "Machinebeheer initialiseren ..." #: cura/CuraApplication.py:853 msgctxt "@info:progress" msgid "Initializing build volume..." msgstr "Werkvolume initialiseren ..." #: cura/CuraApplication.py:921 msgctxt "@info:progress" msgid "Setting up scene..." msgstr "Scene instellen..." #: cura/CuraApplication.py:957 msgctxt "@info:progress" msgid "Loading interface..." msgstr "Interface laden..." #: cura/CuraApplication.py:962 msgctxt "@info:progress" msgid "Initializing engine..." msgstr "Engine initialiseren ..." #: cura/CuraApplication.py:1290 #, python-format msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm." msgid "%(width).1f x %(depth).1f x %(height).1f mm" msgstr "%(width).1f x %(depth).1f x %(height).1f mm" #: cura/CuraApplication.py:1816 #, python-brace-format msgctxt "@info:status" msgid "Only one G-code file can be loaded at a time. Skipped importing {0}" msgstr "Er kan slechts één G-code-bestand tegelijkertijd worden geladen. Het importeren van {0} is overgeslagen" #: cura/CuraApplication.py:1818 cura/OAuth2/AuthorizationService.py:217 #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:189 msgctxt "@info:title" msgid "Warning" msgstr "Waarschuwing" #: cura/CuraApplication.py:1828 #, python-brace-format msgctxt "@info:status" msgid "Can't open any other file if G-code is loading. Skipped importing {0}" msgstr "Kan geen ander bestand openen als G-code wordt geladen. Het importeren van {0} is overgeslagen" #: cura/CuraApplication.py:1830 cura/Settings/CuraContainerRegistry.py:156 #: cura/Settings/CuraContainerRegistry.py:166 #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173 msgctxt "@info:title" msgid "Error" msgstr "Fout" #: cura/Machines/Models/DiscoveredPrintersModel.py:83 msgctxt "@label" msgid "Unknown" msgstr "Onbekend" #: cura/Machines/Models/DiscoveredPrintersModel.py:113 msgctxt "@label" msgid "The printer(s) below cannot be connected because they are part of a group" msgstr "Kan de onderstaande printer(s) niet verbinden omdat deze deel uitmaakt/uitmaken van een groep" #: cura/Machines/Models/DiscoveredPrintersModel.py:115 msgctxt "@label" msgid "Available networked printers" msgstr "Beschikbare netwerkprinters" #: cura/Machines/Models/ExtrudersModel.py:219 msgctxt "@menuitem" msgid "Not overridden" msgstr "Niet overschreven" #: cura/Machines/Models/GlobalStacksModel.py:160 #: resources/qml/PrinterSelector/MachineSelectorList.qml:28 msgctxt "@label" msgid "Connected printers" msgstr "Verbonden printers" #: cura/Machines/Models/GlobalStacksModel.py:160 msgctxt "@label" msgid "Preset printers" msgstr "Vooraf ingestelde printers" #: cura/Machines/Models/GlobalStacksModel.py:165 #, python-brace-format msgctxt "@label {0} is the name of a printer that's about to be deleted." msgid "Are you sure you wish to remove {0}? This cannot be undone!" msgstr "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!" #: cura/Machines/Models/IntentCategoryModel.py:42 #: cura/Machines/Models/IntentSelectionModel.py:61 #: cura/Machines/Models/IntentTranslations.py:11 #: cura/Machines/Models/QualityManagementModel.py:347 msgctxt "@label" msgid "Default" msgstr "Default" #: cura/Machines/Models/IntentCategoryModel.py:45 #: cura/Machines/Models/IntentSelectionModel.py:65 #: cura/Machines/Models/IntentTranslations.py:14 msgctxt "@label" msgid "Visual" msgstr "Visueel" #: cura/Machines/Models/IntentCategoryModel.py:46 #: cura/Machines/Models/IntentSelectionModel.py:66 #: cura/Machines/Models/IntentTranslations.py:15 msgctxt "@text" msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality." msgstr "Het visuele profiel is ontworpen om visuele prototypen en modellen te printen met als doel een hoge visuele en oppervlaktekwaliteit te creëren." #: cura/Machines/Models/IntentCategoryModel.py:49 #: cura/Machines/Models/IntentSelectionModel.py:70 #: cura/Machines/Models/IntentTranslations.py:18 msgctxt "@label" msgid "Engineering" msgstr "Engineering" #: cura/Machines/Models/IntentCategoryModel.py:50 #: cura/Machines/Models/IntentSelectionModel.py:71 #: cura/Machines/Models/IntentTranslations.py:19 msgctxt "@text" msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances." msgstr "Het engineeringprofiel is ontworpen om functionele prototypen en onderdelen voor eindgebruik te printen met als doel een grotere precisie en nauwere toleranties." #: cura/Machines/Models/IntentCategoryModel.py:53 #: cura/Machines/Models/IntentSelectionModel.py:75 #: cura/Machines/Models/IntentTranslations.py:22 msgctxt "@label" msgid "Draft" msgstr "Ontwerp" #: cura/Machines/Models/IntentCategoryModel.py:54 #: cura/Machines/Models/IntentSelectionModel.py:76 #: cura/Machines/Models/IntentTranslations.py:23 msgctxt "@text" msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction." msgstr "Het ontwerpprofiel is ontworpen om initiële prototypen en conceptvalidatie te printen met als doel de printtijd aanzienlijk te verkorten." #: cura/Machines/Models/MaterialManagementModel.py:232 msgctxt "@label" msgid "Custom Material" msgstr "Aangepast materiaal" #: cura/Machines/Models/MaterialManagementModel.py:233 #: resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:340 msgctxt "@label" msgid "Custom" msgstr "Aangepast" #: cura/Machines/Models/QualityManagementModel.py:400 msgctxt "@label" msgid "Custom profiles" msgstr "Aangepaste profielen" #: cura/Machines/Models/QualityManagementModel.py:435 #, python-brace-format msgctxt "@item:inlistbox" msgid "All Supported Types ({0})" msgstr "Alle Ondersteunde Typen ({0})" #: cura/Machines/Models/QualityManagementModel.py:436 msgctxt "@item:inlistbox" msgid "All Files (*)" msgstr "Alle Bestanden (*)" #: cura/Machines/Models/QualitySettingsModel.py:182 msgctxt "@info:status" msgid "Calculated" msgstr "Berekend" #: cura/MultiplyObjectsJob.py:30 msgctxt "@info:status" msgid "Multiplying and placing objects" msgstr "Objecten verveelvoudigen en plaatsen" #: cura/MultiplyObjectsJob.py:32 msgctxt "@info:title" msgid "Placing Objects" msgstr "Objecten plaatsen" #: cura/MultiplyObjectsJob.py:100 msgctxt "@info:title" msgid "Placing Object" msgstr "Object plaatsen" #: cura/OAuth2/AuthorizationHelpers.py:89 msgctxt "@message" msgid "Could not read response." msgstr "Kan het antwoord niet lezen." #: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "De opgegeven status is niet juist." #: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "Time-out tijdens verificatie bij de accountserver." #: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Verleen de vereiste toestemmingen toe bij het autoriseren van deze toepassing." #: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Er heeft een onverwachte gebeurtenis plaatsgevonden bij het aanmelden. Probeer het opnieuw." #: cura/OAuth2/AuthorizationService.py:216 msgctxt "@info" msgid "Unable to start a new sign in process. Check if another sign in attempt is still active." msgstr "Er kan geen nieuw aanmeldingsproces worden gestart. Controleer of een andere aanmeldingspoging nog actief is." #: cura/OAuth2/AuthorizationService.py:277 msgctxt "@info" msgid "Unable to reach the UltiMaker account server." msgstr "Kan de UltiMaker-accountserver niet bereiken." #: cura/OAuth2/AuthorizationService.py:278 msgctxt "@info:title" msgid "Log-in failed" msgstr "Aanmelden mislukt" #: cura/PrinterOutput/UploadMaterialsJob.py:104 msgctxt "@text:error" msgid "Failed to create archive of materials to sync with printers." msgstr "Kan geen materiaalarchief maken voor synchronisatie met printers." #: cura/PrinterOutput/UploadMaterialsJob.py:111 #: cura/PrinterOutput/UploadMaterialsJob.py:165 msgctxt "@text:error" msgid "Failed to load the archive of materials to sync it with printers." msgstr "Kan het materiaalarchief niet laden voor synchronisatie met printers." #: cura/PrinterOutput/UploadMaterialsJob.py:143 msgctxt "@text:error" msgid "The response from Digital Factory appears to be corrupted." msgstr "Antwoord van Digital Factor is mogelijk beschadigd." #: cura/PrinterOutput/UploadMaterialsJob.py:147 #: cura/PrinterOutput/UploadMaterialsJob.py:151 #: cura/PrinterOutput/UploadMaterialsJob.py:155 msgctxt "@text:error" msgid "The response from Digital Factory is missing important information." msgstr "In het antwoord van Digital Factory ontbreekt belangrijke informatie." #: cura/PrinterOutput/UploadMaterialsJob.py:218 msgctxt "@text:error" msgid "Failed to connect to Digital Factory to sync materials with some of the printers." msgstr "Kan geen verbinding maken met Digital Factory voor de synchronisatie van materialen met enkele printers." #: cura/PrinterOutput/UploadMaterialsJob.py:232 msgctxt "@text:error" msgid "Failed to connect to Digital Factory." msgstr "Kan geen verbinding maken met Digital Factory." #: cura/Settings/ActiveQuality.py:43 msgctxt "@label" msgid "Experimental" msgstr "Experimenteel" #: cura/Settings/ContainerManager.py:207 #: cura/Settings/CuraContainerRegistry.py:140 msgctxt "@title:window" msgid "File Already Exists" msgstr "Het Bestand Bestaat Al" #: cura/Settings/ContainerManager.py:208 #: cura/Settings/CuraContainerRegistry.py:141 #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" msgstr "Het bestand {0} bestaat al. Weet u zeker dat u dit bestand wilt overschrijven?" #: cura/Settings/ContainerManager.py:459 cura/Settings/ContainerManager.py:462 msgctxt "@info:status" msgid "Invalid file URL:" msgstr "Ongeldige bestands-URL:" #: cura/Settings/CuraContainerRegistry.py:153 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to export profile to {0}: {1}" msgstr "Kan het profiel niet exporteren als {0}: {1}" #: cura/Settings/CuraContainerRegistry.py:163 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to export profile to {0}: Writer plugin reported failure." msgstr "Kan het profiel niet exporteren als {0}: Plug-in voor de schrijver heeft een fout gerapporteerd." #: cura/Settings/CuraContainerRegistry.py:171 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Exported profile to {0}" msgstr "Het profiel is geëxporteerd als {0}" #: cura/Settings/CuraContainerRegistry.py:173 msgctxt "@info:title" msgid "Export succeeded" msgstr "De export is voltooid" #: cura/Settings/CuraContainerRegistry.py:205 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}: {1}" msgstr "Kan het profiel niet importeren uit {0}: {1}" #: cura/Settings/CuraContainerRegistry.py:209 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Can't import profile from {0} before a printer is added." msgstr "Kan het profiel niet importeren uit {0} voordat een printer toegevoegd is." #: cura/Settings/CuraContainerRegistry.py:224 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "No custom profile to import in file {0}" msgstr "Er is geen aangepast profiel om in het bestand {0} te importeren" #: cura/Settings/CuraContainerRegistry.py:228 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}:" msgstr "Kan het profiel niet importeren uit {0}:" #: cura/Settings/CuraContainerRegistry.py:252 #: cura/Settings/CuraContainerRegistry.py:262 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "This profile {0} contains incorrect data, could not import it." msgstr "Dit profiel {0} bevat incorrecte gegevens. Kan het profiel niet importeren." #: cura/Settings/CuraContainerRegistry.py:355 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to import profile from {0}:" msgstr "Kan het profiel niet importeren uit {0}:" #: cura/Settings/CuraContainerRegistry.py:359 #, python-brace-format msgctxt "@info:status" msgid "Successfully imported profile {0}." msgstr "Het profiel {0} is geïmporteerd." #: cura/Settings/CuraContainerRegistry.py:366 #, python-brace-format msgctxt "@info:status" msgid "File {0} does not contain any valid profile." msgstr "Het bestand {0} bevat geen geldig profiel." #: cura/Settings/CuraContainerRegistry.py:369 #, python-brace-format msgctxt "@info:status" msgid "Profile {0} has an unknown file type or is corrupted." msgstr "Het profiel {0} heeft een onbekend bestandstype of is beschadigd." #: cura/Settings/CuraContainerRegistry.py:443 msgctxt "@label" msgid "Custom profile" msgstr "Aangepast profiel" #: cura/Settings/CuraContainerRegistry.py:459 msgctxt "@info:status" msgid "Profile is missing a quality type." msgstr "Er ontbreekt een kwaliteitstype in het profiel." #: cura/Settings/CuraContainerRegistry.py:463 msgctxt "@info:status" msgid "There is no active printer yet." msgstr "Er is nog geen actieve printer." #: cura/Settings/CuraContainerRegistry.py:469 msgctxt "@info:status" msgid "Unable to add the profile." msgstr "Kan het profiel niet toevoegen." #: cura/Settings/CuraContainerRegistry.py:483 #, python-brace-format msgctxt "@info:status" msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'." msgstr "Kwaliteitstype '{0}' is niet compatibel met de huidige actieve machinedefinitie '{1}'." #: cura/Settings/CuraContainerRegistry.py:488 #, python-brace-format msgctxt "@info:status" msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type." msgstr "Waarschuwing: het profiel is niet zichtbaar omdat het kwaliteitstype '{0}' van het profiel niet beschikbaar is voor de huidige configuratie. Schakel naar een materiaal-nozzle-combinatie waarvoor dit kwaliteitstype geschikt is." #: cura/Settings/MachineManager.py:746 #: plugins/3MFReader/ThreeMFWorkspaceReader.py:221 msgctxt "@label" msgid "Nozzle" msgstr "" #: cura/Settings/MachineManager.py:890 msgctxt "@info:message Followed by a list of settings." msgid "Settings have been changed to match the current availability of extruders:" msgstr "De instellingen zijn gewijzigd zodat deze overeenkomen met de huidige beschikbaarheid van extruders:" #: cura/Settings/MachineManager.py:891 msgctxt "@info:title" msgid "Settings updated" msgstr "De instellingen zijn bijgewerkt" #: cura/Settings/MachineManager.py:1514 msgctxt "@info:title" msgid "Extruder(s) Disabled" msgstr "Extruder(s) uitgeschakeld" #: cura/Settings/cura_empty_instance_containers.py:36 msgctxt "@info:not supported profile" msgid "Not supported" msgstr "Niet ondersteund" #: cura/Settings/cura_empty_instance_containers.py:55 msgctxt "@info:No intent profile selected" msgid "Default" msgstr "Default" #: cura/UI/AddPrinterPagesModel.py:17 #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61 msgctxt "@action:button" msgid "Add" msgstr "Toevoegen" #: cura/UI/AddPrinterPagesModel.py:26 cura/UI/WelcomePagesModel.py:290 msgctxt "@action:button" msgid "Finish" msgstr "Voltooien" #: cura/UI/AddPrinterPagesModel.py:33 plugins/3MFReader/WorkspaceDialog.qml:386 #: plugins/ImageReader/ConfigUI.qml:323 #: plugins/SliceInfoPlugin/MoreInfoWindow.qml:147 #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27 #: plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43 #: resources/qml/ColorDialog.qml:143 #: resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59 #: resources/qml/Dialogs/RenameDialog.qml:103 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293 msgctxt "@action:button" msgid "Cancel" msgstr "Annuleren" #: cura/UI/ObjectsModel.py:69 #, python-brace-format msgctxt "@label" msgid "Group #{group_nr}" msgstr "Groepsnummer #{group_nr}" #: cura/UI/PrintInformation.py:87 msgctxt "@tooltip" msgid "Outer Wall" msgstr "Buitenwand" #: cura/UI/PrintInformation.py:88 msgctxt "@tooltip" msgid "Inner Walls" msgstr "Binnenwanden" #: cura/UI/PrintInformation.py:89 msgctxt "@tooltip" msgid "Skin" msgstr "" #: cura/UI/PrintInformation.py:90 msgctxt "@tooltip" msgid "Infill" msgstr "Vulling" #: cura/UI/PrintInformation.py:91 msgctxt "@tooltip" msgid "Support Infill" msgstr "Supportvulling" #: cura/UI/PrintInformation.py:92 msgctxt "@tooltip" msgid "Support Interface" msgstr "Verbindingsstructuur" #: cura/UI/PrintInformation.py:93 msgctxt "@tooltip" msgid "Support" msgstr "Supportstructuur" #: cura/UI/PrintInformation.py:94 msgctxt "@tooltip" msgid "Skirt" msgstr "" #: cura/UI/PrintInformation.py:95 msgctxt "@tooltip" msgid "Prime Tower" msgstr "Primepijler" #: cura/UI/PrintInformation.py:96 msgctxt "@tooltip" msgid "Travel" msgstr "Beweging" #: cura/UI/PrintInformation.py:97 msgctxt "@tooltip" msgid "Retractions" msgstr "Intrekkingen" #: cura/UI/PrintInformation.py:98 msgctxt "@tooltip" msgid "Other" msgstr "Overig(e)" #: cura/UI/TextManager.py:37 cura/UI/TextManager.py:63 msgctxt "@text:window" msgid "The release notes could not be opened." msgstr "De release notes konden niet worden geopend." #: cura/UI/WelcomePagesModel.py:57 cura/UI/WelcomePagesModel.py:277 msgctxt "@action:button" msgid "Next" msgstr "Volgende" #: cura/UI/WelcomePagesModel.py:286 cura/UI/WhatsNewPagesModel.py:68 msgctxt "@action:button" msgid "Skip" msgstr "Overslaan" #: cura/UI/WhatsNewPagesModel.py:76 #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:175 #: plugins/PerObjectSettingsTool/SettingPickDialog.qml:135 #: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:444 #: resources/qml/Dialogs/AboutDialog.qml:188 msgctxt "@action:button" msgid "Close" msgstr "Sluiten" #: cura/UltimakerCloud/CloudMaterialSync.py:66 msgctxt "@action:button" msgid "Please sync the material profiles with your printers before starting to print." msgstr "Synchroniseer de materiaalprofielen met uw printer voordat u gaat printen." #: cura/UltimakerCloud/CloudMaterialSync.py:67 msgctxt "@action:button" msgid "New materials installed" msgstr "Nieuwe materialen geïnstalleerd" #: cura/UltimakerCloud/CloudMaterialSync.py:74 msgctxt "@action:button" msgid "Sync materials" msgstr "Materialen synchroniseren..." #: cura/UltimakerCloud/CloudMaterialSync.py:82 #: plugins/3MFReader/WorkspaceDialog.py:418 plugins/SolidView/SolidView.py:80 msgctxt "@action:button" msgid "Learn more" msgstr "Meer informatie" #: cura/UltimakerCloud/CloudMaterialSync.py:135 msgctxt "@message:text" msgid "Could not save material archive to {}:" msgstr "Kan materiaalarchief niet opslaan op {}:" #: cura/UltimakerCloud/CloudMaterialSync.py:136 msgctxt "@message:title" msgid "Failed to save material archive" msgstr "Opslaan materiaalarchief mislukt" #: cura/UltimakerCloud/CloudMaterialSync.py:188 msgctxt "@text" msgid "Unknown error." msgstr "Onbekende fout." #: plugins/3MFReader/ThreeMFWorkspaceReader.py:558 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Project file {0} contains an unknown machine type {1}. Cannot import the machine. Models will be imported instead." msgstr "Projectbestand {0} bevat een onbekend type machine {1}. Kan de machine niet importeren. In plaats daarvan worden er modellen geïmporteerd." #: plugins/3MFReader/ThreeMFWorkspaceReader.py:561 msgctxt "@info:title" msgid "Open Project File" msgstr "Projectbestand Openen" #: plugins/3MFReader/ThreeMFWorkspaceReader.py:642 #: plugins/3MFReader/WorkspaceDialog.qml:99 #: plugins/3MFReader/WorkspaceDialog.qml:127 #: plugins/3MFReader/WorkspaceDialog.qml:134 msgctxt "@button" msgid "Create new" msgstr "Nieuw maken" #: plugins/3MFReader/ThreeMFWorkspaceReader.py:692 #, python-brace-format msgctxt "@info:error Don't translate the XML tags or !" msgid "Project file {0} is suddenly inaccessible: {1}." msgstr "Projectbestand {0} is plotseling ontoegankelijk: {1}." #: plugins/3MFReader/ThreeMFWorkspaceReader.py:693 #: plugins/3MFReader/ThreeMFWorkspaceReader.py:701 #: plugins/3MFReader/ThreeMFWorkspaceReader.py:720 msgctxt "@info:title" msgid "Can't Open Project File" msgstr "Kan projectbestand niet openen" #: plugins/3MFReader/ThreeMFWorkspaceReader.py:700 #: plugins/3MFReader/ThreeMFWorkspaceReader.py:718 #, python-brace-format msgctxt "@info:error Don't translate the XML tags or !" msgid "Project file {0} is corrupt: {1}." msgstr "Projectbestand {0} is corrupt: {1}." #: plugins/3MFReader/ThreeMFWorkspaceReader.py:765 #, python-brace-format msgctxt "@info:error Don't translate the XML tag !" msgid "Project file {0} is made using profiles that are unknown to this version of UltiMaker Cura." msgstr "Projectbestand {0} wordt gemaakt met behulp van profielen die onbekend zijn bij deze versie van UltiMaker Cura." #: plugins/3MFReader/WorkspaceDialog.py:233 msgctxt "@title:tab" msgid "Recommended" msgstr "Aanbevolen" #: plugins/3MFReader/WorkspaceDialog.py:235 msgctxt "@title:tab" msgid "Custom" msgstr "Aangepast" #: plugins/3MFReader/WorkspaceDialog.py:411 msgctxt "@info:status" msgid "The material used in this project relies on some material definitions not available in Cura, this might produce undesirable print results. We highly recommend installing the full material package from the Marketplace." msgstr "Het materiaal dat in dit project wordt gebruikt, vertrouwt op materiaaldefinities die niet beschikbaar zijn in Cura, waardoor dit mogelijk tot ongewenste printresultaten leidt. We raden u ten zeerste aan om het volledige materiaalpakket te installeren van de marktplaats." #: plugins/3MFReader/WorkspaceDialog.py:413 msgctxt "@info:title" msgid "Material profiles not installed" msgstr "Materiaalprofielen niet geïnstalleerd" #: plugins/3MFReader/WorkspaceDialog.py:426 msgctxt "@action:button" msgid "Install Materials" msgstr "Materialen installeren" #: plugins/3MFReader/WorkspaceDialog.qml:15 msgctxt "@title:window" msgid "Open Project" msgstr "Project openen" #: plugins/3MFReader/WorkspaceDialog.qml:31 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:61 msgctxt "@action:title" msgid "Summary - Cura Project" msgstr "Samenvatting - Cura-project" #: plugins/3MFReader/WorkspaceDialog.qml:65 msgctxt "@action:ComboBox Update/override existing profile" msgid "Update existing" msgstr "Bestaand(e) bijwerken" #: plugins/3MFReader/WorkspaceDialog.qml:66 msgctxt "@action:ComboBox Save settings in a new profile" msgid "Create new" msgstr "Nieuw maken" #: plugins/3MFReader/WorkspaceDialog.qml:83 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97 msgctxt "@action:label" msgid "Printer settings" msgstr "Printerinstellingen" #: plugins/3MFReader/WorkspaceDialog.qml:92 #: plugins/3MFReader/WorkspaceRow.qml:23 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:106 msgctxt "@action:label" msgid "Type" msgstr "Type" #: plugins/3MFReader/WorkspaceDialog.qml:98 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121 msgctxt "@action:label" msgid "Printer Group" msgstr "Printergroep" #: plugins/3MFReader/WorkspaceDialog.qml:103 msgctxt "@action:label" msgid "Open With" msgstr "Openen" #: plugins/3MFReader/WorkspaceDialog.qml:104 msgctxt "@info:tooltip" msgid "Printer settings will be updated to match the settings saved with the project." msgstr "Printerinstellingen worden bijgewerkt zodat deze overeenkomen met de instellingen die zijn opgeslagen met het project." #: plugins/3MFReader/WorkspaceDialog.qml:156 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:222 msgctxt "@action:label" msgid "Profile settings" msgstr "Profielinstellingen" #: plugins/3MFReader/WorkspaceDialog.qml:166 #: plugins/3MFReader/WorkspaceDialog.qml:238 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:246 msgctxt "@action:label" msgid "Name" msgstr "Naam" #: plugins/3MFReader/WorkspaceDialog.qml:172 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:263 msgctxt "@action:label" msgid "Intent" msgstr "Intent" #: plugins/3MFReader/WorkspaceDialog.qml:178 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:230 msgctxt "@action:label" msgid "Not in profile" msgstr "Niet in profiel" #: plugins/3MFReader/WorkspaceDialog.qml:179 #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:235 msgctxt "@action:label" msgid "%1 override" msgid_plural "%1 overrides" msgstr[0] "%1 overschrijving" msgstr[1] "%1 overschrijvingen" #: plugins/3MFReader/WorkspaceDialog.qml:185 msgctxt "@action:label" msgid "Derivative from" msgstr "Afgeleide van" #: plugins/3MFReader/WorkspaceDialog.qml:186 msgctxt "@action:label" msgid "%1, %2 override" msgid_plural "%1, %2 overrides" msgstr[0] "%1, %2 overschrijving" msgstr[1] "%1, %2 overschrijvingen" #: plugins/3MFReader/WorkspaceDialog.qml:226 msgctxt "@action:label" msgid "Material settings" msgstr "Materiaalinstellingen" #: plugins/3MFReader/WorkspaceDialog.qml:280 msgctxt "@action:label" msgid "Setting visibility" msgstr "Zichtbaarheid instellen" #: plugins/3MFReader/WorkspaceDialog.qml:290 msgctxt "@action:label" msgid "Mode" msgstr "Modus" #: plugins/3MFReader/WorkspaceDialog.qml:296 msgctxt "@action:label" msgid "%1 out of %2" msgstr "%1 van %2" #: plugins/3MFReader/WorkspaceDialog.qml:321 msgctxt "@action:warning" msgid "Loading a project will clear all models on the build plate." msgstr "Als u een project laadt, worden alle modellen van het platform gewist." #: plugins/3MFReader/WorkspaceDialog.qml:367 msgctxt "@label" msgid "The material used in this project is currently not installed in Cura.
    Install the material profile and reopen the project." msgstr "Het materiaal dat in dit project wordt gebruikt, is momenteel niet geïnstalleerd in Cura.
    Installeer het materiaalprofiel en open het project opnieuw." #: plugins/3MFReader/WorkspaceDialog.qml:392 msgctxt "@action:button" msgid "Open" msgstr "Openen" #: plugins/3MFReader/WorkspaceDialog.qml:398 msgctxt "@action:button" msgid "Open project anyway" msgstr "Project toch openen" #: plugins/3MFReader/WorkspaceDialog.qml:407 msgctxt "@action:button" msgid "Install missing material" msgstr "Ontbrekend materiaal installeren" #: plugins/3MFReader/__init__.py:27 plugins/3MFReader/__init__.py:33 msgctxt "@item:inlistbox" msgid "3MF File" msgstr "3MF-bestand" #: plugins/3MFReader/plugin.json msgctxt "name" msgid "3MF Reader" msgstr "3MF-lezer" #: plugins/3MFReader/plugin.json msgctxt "description" msgid "Provides support for reading 3MF files." msgstr "Biedt ondersteuning voor het lezen van 3MF-bestanden." #: plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31 msgctxt "@error:zip" msgid "3MF Writer plug-in is corrupt." msgstr "3MF-schrijverplug-in is beschadigd." #: plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37 msgctxt "@error" msgid "There is no workspace yet to write. Please add a printer first." msgstr "Er is nog geen werkruimte om te schrijven. Voeg eerst een printer toe." #: plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64 #: plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97 msgctxt "@error:zip" msgid "No permission to write the workspace here." msgstr "Geen bevoegdheid om de werkruimte hier te schrijven." #: plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101 msgctxt "@error:zip" msgid "The operating system does not allow saving a project file to this location or with this file name." msgstr "Het besturingssysteem staat niet toe dat u een projectbestand opslaat op deze locatie of met deze bestandsnaam." #: plugins/3MFWriter/ThreeMFWriter.py:240 msgctxt "@error:zip" msgid "Error writing 3mf file." msgstr "Fout bij het schrijven van het 3mf-bestand." #: plugins/3MFWriter/__init__.py:28 msgctxt "@item:inlistbox" msgid "3MF file" msgstr "3MF-bestand" #: plugins/3MFWriter/__init__.py:36 msgctxt "@item:inlistbox" msgid "Cura Project 3MF file" msgstr "Cura-project 3MF-bestand" #: plugins/3MFWriter/plugin.json msgctxt "name" msgid "3MF Writer" msgstr "3MF-schrijver" #: plugins/3MFWriter/plugin.json msgctxt "description" msgid "Provides support for writing 3MF files." msgstr "Biedt ondersteuning voor het schrijven van 3MF-bestanden." #: plugins/AMFReader/__init__.py:15 msgctxt "@item:inlistbox" msgid "AMF File" msgstr "AMF-bestand" #: plugins/AMFReader/plugin.json msgctxt "name" msgid "AMF Reader" msgstr "AMF-lezer" #: plugins/AMFReader/plugin.json msgctxt "description" msgid "Provides support for reading AMF files." msgstr "Biedt ondersteuning voor het lezen van AMF-bestanden." #: plugins/CuraDrive/plugin.json msgctxt "description" msgid "Backup and restore your configuration." msgstr "Een back-up maken van uw configuratie en deze herstellen." #: plugins/CuraDrive/plugin.json msgctxt "name" msgid "Cura Backups" msgstr "Cura-back-ups" #: plugins/CuraDrive/src/CreateBackupJob.py:25 msgctxt "@info:title" msgid "Backups" msgstr "Back-ups" #: plugins/CuraDrive/src/CreateBackupJob.py:26 msgctxt "@info:backup_status" msgid "There was an error while uploading your backup." msgstr "Er is een fout opgetreden tijdens het uploaden van uw back-up." #: plugins/CuraDrive/src/CreateBackupJob.py:46 msgctxt "@info:backup_status" msgid "Creating your backup..." msgstr "Uw back-up maken..." #: plugins/CuraDrive/src/CreateBackupJob.py:55 msgctxt "@info:backup_status" msgid "There was an error while creating your backup." msgstr "Er is een fout opgetreden bij het maken van de back-up." #: plugins/CuraDrive/src/CreateBackupJob.py:59 msgctxt "@info:backup_status" msgid "Uploading your backup..." msgstr "Uw back-up wordt geüpload..." #: plugins/CuraDrive/src/CreateBackupJob.py:69 msgctxt "@info:backup_status" msgid "Your backup has finished uploading." msgstr "Uw back-up is geüpload." #: plugins/CuraDrive/src/CreateBackupJob.py:103 msgctxt "@error:file_size" msgid "The backup exceeds the maximum file size." msgstr "De back-up is groter dan de maximale bestandsgrootte." #: plugins/CuraDrive/src/DriveApiService.py:86 #: plugins/CuraDrive/src/RestoreBackupJob.py:26 msgctxt "@info:backup_status" msgid "There was an error trying to restore your backup." msgstr "Er is een fout opgetreden tijdens het herstellen van uw back-up." #: plugins/CuraDrive/src/DrivePluginExtension.py:69 msgctxt "@item:inmenu" msgid "Manage backups" msgstr "Back-ups beheren" #: plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22 msgctxt "@button" msgid "Want more?" msgstr "Wilt u meer?" #: plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31 msgctxt "@button" msgid "Backup Now" msgstr "Nu back-up maken" #: plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43 msgctxt "@checkbox:description" msgid "Auto Backup" msgstr "Auto back-up" #: plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44 msgctxt "@checkbox:description" msgid "Automatically create a backup each day that Cura is started." msgstr "Maak elke dag dat Cura wordt gestart, automatisch een back-up." #: plugins/CuraDrive/src/qml/components/BackupListItem.qml:64 msgctxt "@button" msgid "Restore" msgstr "Herstellen" #: plugins/CuraDrive/src/qml/components/BackupListItem.qml:93 msgctxt "@dialog:title" msgid "Delete Backup" msgstr "Back-up verwijderen" #: plugins/CuraDrive/src/qml/components/BackupListItem.qml:94 msgctxt "@dialog:info" msgid "Are you sure you want to delete this backup? This cannot be undone." msgstr "Weet u zeker dat u deze back-up wilt verwijderen? Dit kan niet ongedaan worden gemaakt." #: plugins/CuraDrive/src/qml/components/BackupListItem.qml:102 msgctxt "@dialog:title" msgid "Restore Backup" msgstr "Back-up herstellen" #: plugins/CuraDrive/src/qml/components/BackupListItem.qml:103 msgctxt "@dialog:info" msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?" msgstr "U moet Cura opnieuw starten voordat uw back-up wordt hersteld. Wilt u Cura nu sluiten?" #: plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21 msgctxt "@backuplist:label" msgid "Cura Version" msgstr "Cura-versie" #: plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29 msgctxt "@backuplist:label" msgid "Machines" msgstr "Machines" #: plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37 msgctxt "@backuplist:label" msgid "Materials" msgstr "Materialen" #: plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45 msgctxt "@backuplist:label" msgid "Profiles" msgstr "Profielen" #: plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53 msgctxt "@backuplist:label" msgid "Plugins" msgstr "Plug-ins" #: plugins/CuraDrive/src/qml/main.qml:25 msgctxt "@title:window" msgid "Cura Backups" msgstr "Cura-back-ups" #: plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28 msgctxt "@title" msgid "My Backups" msgstr "Mijn back-ups" #: plugins/CuraDrive/src/qml/pages/BackupsPage.qml:36 msgctxt "@empty_state" msgid "You don't have any backups currently. Use the 'Backup Now' button to create one." msgstr "U hebt momenteel geen back-ups. Gebruik de knop 'Nu back-up maken' om een back-up te maken." #: plugins/CuraDrive/src/qml/pages/BackupsPage.qml:55 msgctxt "@backup_limit_info" msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones." msgstr "Tijdens de voorbeeldfase zijn er maximaal 5 back-ups zichtbaar. Verwijder een back-up als u oudere back-ups wilt bekijken." #: plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34 msgctxt "@description" msgid "Backup and synchronize your Cura settings." msgstr "Maak een back-up van uw Cura-instellingen en synchroniseer deze." #: plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47 #: plugins/Marketplace/resources/qml/Marketplace.qml:312 #: resources/qml/Account/GeneralOperations.qml:49 #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:180 #: resources/qml/WelcomePages/CloudContent.qml:212 msgctxt "@button" msgid "Sign in" msgstr "Aanmelden" #: plugins/CuraEngineBackend/CuraEngineBackend.py:162 msgctxt "@message" msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker." msgstr "Slicen is mislukt door een onverwachte fout. Overweeg om de fout te melden via onze issue tracker." #: plugins/CuraEngineBackend/CuraEngineBackend.py:163 msgctxt "@message:title" msgid "Slicing failed" msgstr "Slicen mislukt" #: plugins/CuraEngineBackend/CuraEngineBackend.py:168 msgctxt "@message:button" msgid "Report a bug" msgstr "Een fout melden" #: plugins/CuraEngineBackend/CuraEngineBackend.py:169 msgctxt "@message:description" msgid "Report a bug on UltiMaker Cura's issue tracker." msgstr "Meld een fout via de issue tracker van UltiMaker Cura." #: plugins/CuraEngineBackend/CuraEngineBackend.py:416 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." msgstr "Met het huidige materiaal is slicen niet mogelijk, omdat het materiaal niet compatibel is met de geselecteerde machine of configuratie." #: plugins/CuraEngineBackend/CuraEngineBackend.py:417 #: plugins/CuraEngineBackend/CuraEngineBackend.py:450 #: plugins/CuraEngineBackend/CuraEngineBackend.py:477 #: plugins/CuraEngineBackend/CuraEngineBackend.py:489 #: plugins/CuraEngineBackend/CuraEngineBackend.py:501 #: plugins/CuraEngineBackend/CuraEngineBackend.py:514 msgctxt "@info:title" msgid "Unable to slice" msgstr "Kan niet slicen" #: plugins/CuraEngineBackend/CuraEngineBackend.py:449 #, python-brace-format msgctxt "@info:status" msgid "Unable to slice with the current settings. The following settings have errors: {0}" msgstr "Met de huidige instellingen is slicing niet mogelijk. De volgende instellingen bevatten fouten: {0}" #: plugins/CuraEngineBackend/CuraEngineBackend.py:476 #, python-brace-format msgctxt "@info:status" msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}" msgstr "Slicing is niet mogelijk vanwege enkele instellingen per model. De volgende instellingen bevatten fouten voor een of meer modellen: {error_labels}" #: plugins/CuraEngineBackend/CuraEngineBackend.py:488 msgctxt "@info:status" msgid "Unable to slice because the prime tower or prime position(s) are invalid." msgstr "Slicen is niet mogelijk omdat de terugduwpijler of terugduwpositie(s) ongeldig zijn." #: plugins/CuraEngineBackend/CuraEngineBackend.py:500 #, python-format msgctxt "@info:status" msgid "Unable to slice because there are objects associated with disabled Extruder %s." msgstr "Slicen is niet mogelijk omdat er objecten gekoppeld zijn aan uitgeschakelde Extruder %s." #: plugins/CuraEngineBackend/CuraEngineBackend.py:510 msgctxt "@info:status" msgid "" "Please review settings and check if your models:\n" "- Fit within the build volume\n" "- Are assigned to an enabled extruder\n" "- Are not all set as modifier meshes" msgstr "" "Controleer de instellingen en zorg ervoor dat uw modellen:\n" "- binnen het werkvolume passen\n" "- zijn toegewezen aan een ingeschakelde extruder\n" "- niet allemaal zijn ingesteld als modificatierasters" #: plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 #: plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 msgctxt "@info:status" msgid "Processing Layers" msgstr "Lagen verwerken" #: plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261 msgctxt "@info:title" msgid "Information" msgstr "Informatie" #: plugins/CuraEngineBackend/plugin.json msgctxt "name" msgid "CuraEngine Backend" msgstr "CuraEngine-back-end" #: plugins/CuraEngineBackend/plugin.json msgctxt "description" msgid "Provides the link to the CuraEngine slicing backend." msgstr "Voorziet in de koppeling naar het slicing-back-end van de CuraEngine." #: plugins/CuraProfileReader/__init__.py:14 #: plugins/CuraProfileWriter/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura Profile" msgstr "Cura-profiel" #: plugins/CuraProfileReader/plugin.json msgctxt "name" msgid "Cura Profile Reader" msgstr "Cura-profiellezer" #: plugins/CuraProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing Cura profiles." msgstr "Biedt ondersteuning bij het importeren van Cura-profielen." #: plugins/CuraProfileWriter/plugin.json msgctxt "name" msgid "Cura Profile Writer" msgstr "Cura-profielschrijver" #: plugins/CuraProfileWriter/plugin.json msgctxt "description" msgid "Provides support for exporting Cura profiles." msgstr "Biedt ondersteuning voor het exporteren van Cura-profielen." #: plugins/DigitalLibrary/plugin.json msgctxt "description" msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library." msgstr "Maakt verbinding met de digitale bibliotheek, zodat Cura bestanden kan openen vanuit, en bestanden kan opslaan in, de digitale bibliotheek." #: plugins/DigitalLibrary/plugin.json msgctxt "name" msgid "Ultimaker Digital Library" msgstr "Ultimaker Digital Library" #: plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:216 msgctxt "@option" msgid "Save Cura project and print file" msgstr "Cura-project opslaan en bestand printen" #: plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:217 msgctxt "@option" msgid "Save Cura project" msgstr "Cura-project opslaan" #: plugins/DigitalLibrary/src/DigitalFactoryProjectResponse.py:19 msgctxt "@text Placeholder for the username if it has been deleted" msgid "deleted user" msgstr "verwijderde gebruiker" #: plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127 msgctxt "@info" msgid "Could not access update information." msgstr "Geen toegang tot update-informatie." #: plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17 #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}." msgstr "Er zijn mogelijk nieuwe functies of foutoplossingen beschikbaar voor uw {machine_name}. Als u dit nog niet hebt gedaan, is het raadzaam om de firmware op uw printer bij te werken naar versie {latest_version}." #: plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s stable firmware available" msgstr "Nieuwe stabiele firmware voor %s beschikbaar" #: plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28 msgctxt "@action:button" msgid "How to update" msgstr "Instructies voor bijwerken" #: plugins/FirmwareUpdateChecker/plugin.json msgctxt "description" msgid "Checks for firmware updates." msgstr "Controleert op firmware-updates." #: plugins/FirmwareUpdateChecker/plugin.json msgctxt "name" msgid "Firmware Update Checker" msgstr "Firmware-updatecontrole" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27 msgctxt "@action" msgid "Update Firmware" msgstr "Firmware bijwerken" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31 msgctxt "@title" msgid "Update Firmware" msgstr "Firmware bijwerken" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37 msgctxt "@label" msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work." msgstr "Firmware is de software die direct op de 3D-printer wordt uitgevoerd. Deze firmware bedient de stappenmotoren, regelt de temperatuur en zorgt er in feite voor dat de printer doet wat deze moet doen." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43 msgctxt "@label" msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements." msgstr "De firmware die bij nieuwe printers wordt geleverd, werkt wel, maar nieuwe versies hebben vaak meer functies en verbeteringen." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55 msgctxt "@action:button" msgid "Automatically upgrade Firmware" msgstr "Firmware-upgrade Automatisch Uitvoeren" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66 msgctxt "@action:button" msgid "Upload custom Firmware" msgstr "Aangepaste Firmware Uploaden" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79 msgctxt "@label" msgid "Firmware can not be updated because there is no connection with the printer." msgstr "Kan de firmware niet bijwerken omdat er geen verbinding met de printer is." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86 msgctxt "@label" msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware." msgstr "Kan de firmware niet bijwerken omdat de verbinding met de printer geen ondersteuning biedt voor het uitvoeren van een firmware-upgrade." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93 msgctxt "@title:window" msgid "Select custom firmware" msgstr "Aangepaste firmware selecteren" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:113 msgctxt "@title:window" msgid "Firmware Update" msgstr "Firmware-update" #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:137 msgctxt "@label" msgid "Updating firmware." msgstr "De firmware wordt bijgewerkt." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:139 msgctxt "@label" msgid "Firmware update completed." msgstr "De firmware-update is voltooid." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:141 msgctxt "@label" msgid "Firmware update failed due to an unknown error." msgstr "Firmware-update mislukt door een onbekende fout." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143 msgctxt "@label" msgid "Firmware update failed due to an communication error." msgstr "Firmware-update mislukt door een communicatiefout." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145 msgctxt "@label" msgid "Firmware update failed due to an input/output error." msgstr "Firmware-update mislukt door een invoer-/uitvoerfout." #: plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147 msgctxt "@label" msgid "Firmware update failed due to missing firmware." msgstr "Firmware-update mislukt door ontbrekende firmware." #: plugins/FirmwareUpdater/plugin.json msgctxt "name" msgid "Firmware Updater" msgstr "Firmware-updater" #: plugins/FirmwareUpdater/plugin.json msgctxt "description" msgid "Provides a machine actions for updating firmware." msgstr "Biedt machineacties voor het bijwerken van de firmware." #: plugins/GCodeGzReader/__init__.py:17 plugins/GCodeGzWriter/__init__.py:17 msgctxt "@item:inlistbox" msgid "Compressed G-code File" msgstr "Gecomprimeerd G-code-bestand" #: plugins/GCodeGzReader/plugin.json msgctxt "name" msgid "Compressed G-code Reader" msgstr "Lezer voor gecomprimeerde G-code" #: plugins/GCodeGzReader/plugin.json msgctxt "description" msgid "Reads g-code from a compressed archive." msgstr "Hiermee leest u G-code uit een gecomprimeerd archief." #: plugins/GCodeGzWriter/GCodeGzWriter.py:43 msgctxt "@error:not supported" msgid "GCodeGzWriter does not support text mode." msgstr "GCodeGzWriter ondersteunt geen tekstmodus." #: plugins/GCodeGzWriter/plugin.json msgctxt "name" msgid "Compressed G-code Writer" msgstr "Schrijver voor gecomprimeerde G-code" #: plugins/GCodeGzWriter/plugin.json msgctxt "description" msgid "Writes g-code to a compressed archive." msgstr "Met deze optie schrijft u G-code naar een gecomprimeerd archief." #: plugins/GCodeProfileReader/__init__.py:14 plugins/GCodeReader/__init__.py:14 #: plugins/GCodeWriter/__init__.py:16 msgctxt "@item:inlistbox" msgid "G-code File" msgstr "G-code-bestand" #: plugins/GCodeProfileReader/plugin.json msgctxt "name" msgid "G-code Profile Reader" msgstr "G-code-profiellezer" #: plugins/GCodeProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing profiles from g-code files." msgstr "Biedt ondersteuning voor het importeren van profielen uit G-code-bestanden." #: plugins/GCodeReader/FlavorParser.py:359 msgctxt "@info:status" msgid "Parsing G-code" msgstr "G-code parseren" #: plugins/GCodeReader/FlavorParser.py:361 #: plugins/GCodeReader/FlavorParser.py:515 msgctxt "@info:title" msgid "G-code Details" msgstr "Details van de G-code" #: plugins/GCodeReader/FlavorParser.py:513 msgctxt "@info:generic" msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate." msgstr "Zorg ervoor dat de G-code geschikt is voor uw printer en de printerconfiguratie voordat u het bestand verzendt. Mogelijk is de weergave van de G-code niet nauwkeurig." #: plugins/GCodeReader/__init__.py:18 msgctxt "@item:inlistbox" msgid "G File" msgstr "G-bestand" #: plugins/GCodeReader/plugin.json msgctxt "description" msgid "Allows loading and displaying G-code files." msgstr "Hiermee kunt u G-code-bestanden laden en weergeven." #: plugins/GCodeReader/plugin.json msgctxt "name" msgid "G-code Reader" msgstr "G-code-lezer" #: plugins/GCodeWriter/GCodeWriter.py:75 msgctxt "@error:not supported" msgid "GCodeWriter does not support non-text mode." msgstr "GCodeWriter ondersteunt geen non-tekstmodus." #: plugins/GCodeWriter/GCodeWriter.py:81 plugins/GCodeWriter/GCodeWriter.py:97 msgctxt "@warning:status" msgid "Please prepare G-code before exporting." msgstr "Bereid voorafgaand aan het exporteren G-code voor." #: plugins/GCodeWriter/plugin.json msgctxt "name" msgid "G-code Writer" msgstr "G-code-schrijver" #: plugins/GCodeWriter/plugin.json msgctxt "description" msgid "Writes g-code to a file." msgstr "Met deze optie schrijft u G-code naar een bestand." #: plugins/ImageReader/ConfigUI.qml:14 msgctxt "@title:window" msgid "Convert Image" msgstr "Afbeelding converteren..." #: plugins/ImageReader/ConfigUI.qml:33 msgctxt "@action:label" msgid "Height (mm)" msgstr "Hoogte (mm)" #: plugins/ImageReader/ConfigUI.qml:56 msgctxt "@info:tooltip" msgid "The maximum distance of each pixel from \"Base.\"" msgstr "De maximale afstand van elke pixel tot de \"Basis\"." #: plugins/ImageReader/ConfigUI.qml:66 msgctxt "@action:label" msgid "Base (mm)" msgstr "Basis (mm)" #: plugins/ImageReader/ConfigUI.qml:90 msgctxt "@info:tooltip" msgid "The base height from the build plate in millimeters." msgstr "De basishoogte van het platform in millimeters." #: plugins/ImageReader/ConfigUI.qml:100 msgctxt "@action:label" msgid "Width (mm)" msgstr "Breedte (mm)" #: plugins/ImageReader/ConfigUI.qml:124 msgctxt "@info:tooltip" msgid "The width in millimeters on the build plate" msgstr "De breedte op het platform in millimeters" #: plugins/ImageReader/ConfigUI.qml:134 msgctxt "@action:label" msgid "Depth (mm)" msgstr "Diepte (mm)" #: plugins/ImageReader/ConfigUI.qml:158 msgctxt "@info:tooltip" msgid "The depth in millimeters on the build plate" msgstr "De diepte op het platform in millimeters" #: plugins/ImageReader/ConfigUI.qml:187 msgctxt "@item:inlistbox" msgid "Darker is higher" msgstr "Donkerder is hoger" #: plugins/ImageReader/ConfigUI.qml:188 msgctxt "@item:inlistbox" msgid "Lighter is higher" msgstr "Lichter is hoger" #: plugins/ImageReader/ConfigUI.qml:195 msgctxt "@info:tooltip" msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model." msgstr "Bij lithofanen dienen donkere pixels overeen te komen met de dikkere plekken om meer licht tegen te houden. Bij hoogtekaarten geven lichtere pixels hoger terrein aan. Lichtere pixels dienen daarom overeen te komen met dikkere plekken in het gegenereerde 3D-model." #: plugins/ImageReader/ConfigUI.qml:205 msgctxt "@action:label" msgid "Color Model" msgstr "Kleur model" #: plugins/ImageReader/ConfigUI.qml:224 msgctxt "@item:inlistbox" msgid "Linear" msgstr "Lineair" #: plugins/ImageReader/ConfigUI.qml:225 msgctxt "@item:inlistbox" msgid "Translucency" msgstr "Doorschijnendheid" #: plugins/ImageReader/ConfigUI.qml:232 msgctxt "@info:tooltip" msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly." msgstr "Voor lithofanen is een eenvoudig logaritmisch model voor doorschijnendheid beschikbaar. Voor hoogtekaarten corresponderen de pixelwaarden lineair met hoogten." #: plugins/ImageReader/ConfigUI.qml:242 msgctxt "@action:label" msgid "1mm Transmittance (%)" msgstr "Transmissie 1 mm (%)" #: plugins/ImageReader/ConfigUI.qml:263 msgctxt "@info:tooltip" msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image." msgstr "Het percentage licht dat doordringt in een print met een dikte van 1 millimeter. Een lagere waarde verhoogt het contrast in donkere gebieden en verlaagt het contrast in lichte gebieden van de afbeelding." #: plugins/ImageReader/ConfigUI.qml:274 msgctxt "@action:label" msgid "Smoothing" msgstr "Effenen" #: plugins/ImageReader/ConfigUI.qml:298 msgctxt "@info:tooltip" msgid "The amount of smoothing to apply to the image." msgstr "De mate van effening die op de afbeelding moet worden toegepast." #: plugins/ImageReader/ConfigUI.qml:329 #: plugins/SliceInfoPlugin/MoreInfoWindow.qml:136 #: resources/qml/ColorDialog.qml:148 resources/qml/Dialogs/RenameDialog.qml:25 msgctxt "@action:button" msgid "OK" msgstr "OK" #: plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "JPG Image" msgstr "JPG-afbeelding" #: plugins/ImageReader/__init__.py:18 msgctxt "@item:inlistbox" msgid "JPEG Image" msgstr "JPEG-afbeelding" #: plugins/ImageReader/__init__.py:22 msgctxt "@item:inlistbox" msgid "PNG Image" msgstr "PNG-afbeelding" #: plugins/ImageReader/__init__.py:26 msgctxt "@item:inlistbox" msgid "BMP Image" msgstr "BMP-afbeelding" #: plugins/ImageReader/__init__.py:30 msgctxt "@item:inlistbox" msgid "GIF Image" msgstr "GIF-afbeelding" #: plugins/ImageReader/plugin.json msgctxt "description" msgid "Enables ability to generate printable geometry from 2D image files." msgstr "Hiermee wordt het genereren van printbare geometrie van 2D-afbeeldingsbestanden mogelijk." #: plugins/ImageReader/plugin.json msgctxt "name" msgid "Image Reader" msgstr "Afbeeldinglezer" #: plugins/LegacyProfileReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura 15.04 profiles" msgstr "Cura 15.04-profielen" #: plugins/LegacyProfileReader/plugin.json msgctxt "name" msgid "Legacy Cura Profile Reader" msgstr "Lezer voor Profielen van oudere Cura-versies" #: plugins/LegacyProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing profiles from legacy Cura versions." msgstr "Biedt ondersteuning voor het importeren van profielen uit oudere Cura-versies." #: plugins/MachineSettingsAction/MachineSettingsAction.py:32 msgctxt "@action" msgid "Machine Settings" msgstr "Machine-instellingen" #: plugins/MachineSettingsAction/MachineSettingsAction.qml:42 msgctxt "@title:tab" msgid "Printer" msgstr "Printer" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63 msgctxt "@title:label" msgid "Nozzle Settings" msgstr "Nozzle-instellingen" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:74 msgctxt "@label" msgid "Nozzle size" msgstr "Maat nozzle" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:78 #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:92 #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:108 #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:123 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:72 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:87 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:102 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261 #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279 #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:85 #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:99 msgctxt "@label" msgid "mm" msgstr "mm" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:88 msgctxt "@label" msgid "Compatible material diameter" msgstr "Compatibele materiaaldiameter" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:104 msgctxt "@label" msgid "Nozzle offset X" msgstr "Nozzle-offset X" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:119 msgctxt "@label" msgid "Nozzle offset Y" msgstr "Nozzle-offset Y" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:134 msgctxt "@label" msgid "Cooling Fan Number" msgstr "Nummer van koelventilator" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162 msgctxt "@title:label" msgid "Extruder Start G-code" msgstr "Start-G-code van extruder" #: plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176 msgctxt "@title:label" msgid "Extruder End G-code" msgstr "Eind-G-code van extruder" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56 msgctxt "@title:label" msgid "Printer Settings" msgstr "Printerinstellingen" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:68 msgctxt "@label" msgid "X (Width)" msgstr "X (Breedte)" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:83 msgctxt "@label" msgid "Y (Depth)" msgstr "Y (Diepte)" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:98 msgctxt "@label" msgid "Z (Height)" msgstr "Z (Hoogte)" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:112 msgctxt "@label" msgid "Build plate shape" msgstr "Vorm van het platform" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:125 msgctxt "@label" msgid "Origin at center" msgstr "Centraal oorsprongpunt" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:137 msgctxt "@label" msgid "Heated bed" msgstr "Verwarmd bed" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:149 msgctxt "@label" msgid "Heated build volume" msgstr "Verwarmde werkvolume" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:161 msgctxt "@label" msgid "G-code flavor" msgstr "Versie G-code" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:185 msgctxt "@title:label" msgid "Printhead Settings" msgstr "Printkopinstellingen" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:197 msgctxt "@label" msgid "X min" msgstr "X min" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:217 msgctxt "@label" msgid "Y min" msgstr "Y min" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:237 msgctxt "@label" msgid "X max" msgstr "X max" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:257 msgctxt "@label" msgid "Y max" msgstr "Y max" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:275 msgctxt "@label" msgid "Gantry Height" msgstr "Rijbrughoogte" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:289 msgctxt "@label" msgid "Number of Extruders" msgstr "Aantal extruders" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:342 msgctxt "@label" msgid "Apply Extruder offsets to GCode" msgstr "Pas extruderoffsets toe op GCode" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:390 msgctxt "@title:label" msgid "Start G-code" msgstr "Start G-code" #: plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:401 msgctxt "@title:label" msgid "End G-code" msgstr "Eind G-code" #: plugins/MachineSettingsAction/plugin.json msgctxt "name" msgid "Machine Settings Action" msgstr "Actie machine-instellingen" #: plugins/MachineSettingsAction/plugin.json msgctxt "description" msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)." msgstr "Biedt een manier om de machine-instellingen (zoals bouwvolume, maat nozzle, enz.) te wijzigen." #: plugins/Marketplace/CloudSync/CloudPackageChecker.py:144 msgctxt "@info:generic" msgid "Do you want to sync material and software packages with your account?" msgstr "Wilt u materiaal- en softwarepackages synchroniseren met uw account?" #: plugins/Marketplace/CloudSync/CloudPackageChecker.py:145 #: plugins/Marketplace/CloudSync/DownloadPresenter.py:95 msgctxt "@info:title" msgid "Changes detected from your UltiMaker account" msgstr "Wijzigingen gedetecteerd van uw UltiMaker-account" #: plugins/Marketplace/CloudSync/CloudPackageChecker.py:147 msgctxt "@action:button" msgid "Sync" msgstr "Synchroniseren" #: plugins/Marketplace/CloudSync/DownloadPresenter.py:91 msgctxt "@info:generic" msgid "Syncing..." msgstr "Synchroniseren ..." #: plugins/Marketplace/CloudSync/LicenseModel.py:12 #: plugins/Marketplace/resources/qml/LicenseDialog.qml:79 msgctxt "@button" msgid "Decline" msgstr "Nee, ik ga niet akkoord" #: plugins/Marketplace/CloudSync/LicenseModel.py:13 #: resources/qml/WelcomePages/UserAgreementContent.qml:53 msgctxt "@button" msgid "Agree" msgstr "Akkoord" #: plugins/Marketplace/CloudSync/LicenseModel.py:77 msgctxt "@title:window" msgid "Plugin License Agreement" msgstr "Licentieovereenkomst plug-in" #: plugins/Marketplace/CloudSync/LicensePresenter.py:42 msgctxt "@button" msgid "Decline and remove from account" msgstr "Weigeren en verwijderen uit account" #: plugins/Marketplace/CloudSync/RestartApplicationPresenter.py:22 msgctxt "@info:generic" msgid "You need to quit and restart {} before changes have effect." msgstr "U moet {} afsluiten en herstarten voordat de wijzigingen van kracht worden." #: plugins/Marketplace/CloudSync/SyncOrchestrator.py:79 msgctxt "@info:generic" msgid "{} plugins failed to download" msgstr "{} plug-ins zijn niet gedownload" #: plugins/Marketplace/LocalPackageList.py:28 msgctxt "@label" msgid "Installed Plugins" msgstr "Geïnstalleerde plug-ins" #: plugins/Marketplace/LocalPackageList.py:29 msgctxt "@label" msgid "Installed Materials" msgstr "Geïnstalleerde materialen" #: plugins/Marketplace/LocalPackageList.py:33 msgctxt "@label" msgid "Bundled Plugins" msgstr "Gebundelde plug-ins" #: plugins/Marketplace/LocalPackageList.py:34 msgctxt "@label" msgid "Bundled Materials" msgstr "Gebundelde materialen" #: plugins/Marketplace/PackageModel.py:43 msgctxt "@label:property" msgid "Unknown Package" msgstr "Onbekend pakket" #: plugins/Marketplace/PackageModel.py:66 msgctxt "@label:property" msgid "Unknown Author" msgstr "Onbekende auteur" #: plugins/Marketplace/PackageModel.py:95 msgctxt "@label:label Ultimaker Marketplace is a brand name, don't translate" msgid "The material package associated with the Cura project could not be found on the Ultimaker Marketplace. Use the partial material profile definition stored in the Cura project file at your own risk." msgstr "Het materiaalpakket dat is gekoppeld aan het Cura-project kan niet worden gevonden op de Ultimaker Marketplace. Gebruik de definitie van het gedeeltelijke materiaalprofiel die is opgeslagen in het Cura-projectbestand op eigen risico." #: plugins/Marketplace/RemotePackageList.py:117 msgctxt "@info:error" msgid "Could not interpret the server's response." msgstr "Antwoord van de server is niet duidelijk." #: plugins/Marketplace/RemotePackageList.py:148 msgctxt "@info:error" msgid "Could not reach Marketplace." msgstr "Kan Marketplace niet bereiken." #: plugins/Marketplace/plugin.json msgctxt "description" msgid "Manages extensions to the application and allows browsing extensions from the UltiMaker website." msgstr "Beheert extensies voor de toepassing en staat browsingextensies toe van de UltiMaker-website." #: plugins/Marketplace/plugin.json msgctxt "name" msgid "Marketplace" msgstr "Marktplaats" #: plugins/Marketplace/resources/qml/CompatibilityDialog.qml:15 msgctxt "@title" msgid "Changes from your account" msgstr "Wijzigingen van uw account" #: plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24 msgctxt "@button" msgid "Dismiss" msgstr "Verwijderen" #: plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24 #: resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:76 #: resources/qml/WelcomePages/WhatsNewContent.qml:175 msgctxt "@button" msgid "Next" msgstr "Volgende" #: plugins/Marketplace/resources/qml/CompatibilityDialog.qml:52 msgctxt "@label" msgid "The following packages will be added:" msgstr "De volgende packages worden toegevoegd:" #: plugins/Marketplace/resources/qml/CompatibilityDialog.qml:94 msgctxt "@label" msgid "The following packages can not be installed because of an incompatible Cura version:" msgstr "De volgende packages kunnen niet worden geïnstalleerd omdat de Cura-versie niet compatibel is:" #: plugins/Marketplace/resources/qml/InstallMissingPackagesDialog.qml:15 msgctxt "@title" msgid "Install missing Materials" msgstr "Ontbrekend materiaal installeren" #: plugins/Marketplace/resources/qml/LicenseDialog.qml:15 msgctxt "@button" msgid "Plugin license agreement" msgstr "Licentieovereenkomst plug-in" #: plugins/Marketplace/resources/qml/LicenseDialog.qml:47 msgctxt "@text" msgid "Please read and agree with the plugin licence." msgstr "Lees de plug-in-licentie en stem hiermee in." #: plugins/Marketplace/resources/qml/LicenseDialog.qml:70 msgctxt "@button" msgid "Accept" msgstr "Ja, ik ga akkoord" #: plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32 msgctxt "@info:tooltip" msgid "Manage packages" msgstr "Pakketten beheren" #: plugins/Marketplace/resources/qml/ManagedPackages.qml:12 msgctxt "@header" msgid "Manage packages" msgstr "Pakketten beheren" #: plugins/Marketplace/resources/qml/ManagedPackages.qml:16 msgctxt "@text" msgid "Manage your UltiMaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly." msgstr "Beheer hier uw UltiMaker Cura-plug-ins en materiaalprofielen. Zorg ervoor dat uw plug-ins up-to-date blijven en maak regelmatig een back-up van uw instellingen." #: plugins/Marketplace/resources/qml/Marketplace.qml:87 msgctxt "@title" msgid "Loading..." msgstr "Laden..." #: plugins/Marketplace/resources/qml/Marketplace.qml:148 msgctxt "@button" msgid "Plugins" msgstr "Plug-ins" #: plugins/Marketplace/resources/qml/Marketplace.qml:156 msgctxt "@button" msgid "Materials" msgstr "Materialen" #: plugins/Marketplace/resources/qml/Marketplace.qml:193 msgctxt "@info" msgid "Search in the browser" msgstr "Zoeken in browser" #: plugins/Marketplace/resources/qml/Marketplace.qml:271 msgctxt "@button" msgid "In order to use the package you will need to restart Cura" msgstr "Om het pakket te gebruiken moet u Cura opnieuw opstarten" #: plugins/Marketplace/resources/qml/Marketplace.qml:279 msgctxt "@info:button, %1 is the application name" msgid "Quit %1" msgstr "Sluit %1" #: plugins/Marketplace/resources/qml/Marketplace.qml:300 msgctxt "@description" msgid "Please sign in to get verified plugins and materials for UltiMaker Cura Enterprise" msgstr "Meld u aan voor geverifieerde plug-ins en materialen voor UltiMaker Cura Enterprise" #: plugins/Marketplace/resources/qml/Materials.qml:8 #: plugins/Marketplace/resources/qml/MissingPackages.qml:8 msgctxt "@header" msgid "Install Materials" msgstr "Materialen installeren" #: plugins/Marketplace/resources/qml/Materials.qml:12 msgctxt "@text" msgid "Select and install material profiles optimised for your UltiMaker 3D printers." msgstr "Selecteer en installeer materiaalprofielen die zijn geoptimaliseerd voor uw UltiMaker 3D-printers." #: plugins/Marketplace/resources/qml/MultipleLicenseDialog.qml:35 msgctxt "@label" msgid "You need to accept the license to install the package" msgstr "U moet de licentie accepteren om de package te installeren" #: plugins/Marketplace/resources/qml/OnboardBanner.qml:101 #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:205 msgctxt "@button:label" msgid "Learn More" msgstr "Meer Informatie" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:170 msgctxt "@label Is followed by the name of an author" msgid "By" msgstr "Door" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:224 msgctxt "@button" msgid "Disable" msgstr "Uitschakelen" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:224 msgctxt "@button" msgid "Enable" msgstr "Inschakelen" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:242 msgctxt "@button" msgid "Downgrading..." msgstr "Downgraden..." #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:243 msgctxt "@button" msgid "Downgrade" msgstr "Downgraden" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:247 msgctxt "@button" msgid "Installing..." msgstr "Installeren..." #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:248 msgctxt "@button" msgid "Install" msgstr "Installeren" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:252 msgctxt "@button" msgid "Uninstall" msgstr "De-installeren" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:267 msgctxt "@button" msgid "Update" msgstr "Bijwerken" #: plugins/Marketplace/resources/qml/PackageCardHeader.qml:267 msgctxt "@button" msgid "Updating..." msgstr "Updaten..." #: plugins/Marketplace/resources/qml/PackageDetails.qml:15 msgctxt "@header" msgid "Package details" msgstr "Pakketgegevens" #: plugins/Marketplace/resources/qml/PackageDetails.qml:40 msgctxt "@button:tooltip" msgid "Back" msgstr "Terug" #: plugins/Marketplace/resources/qml/PackagePage.qml:81 msgctxt "@header" msgid "Description" msgstr "Beschrijving" #: plugins/Marketplace/resources/qml/PackagePage.qml:110 msgctxt "@header" msgid "Compatible printers" msgstr "Compatibele printers" #: plugins/Marketplace/resources/qml/PackagePage.qml:134 msgctxt "@info" msgid "No compatibility information" msgstr "Geen compatibiliteitsinformatie" #: plugins/Marketplace/resources/qml/PackagePage.qml:152 msgctxt "@header" msgid "Compatible support materials" msgstr "Compatibele ondersteuningsmaterialen" #: plugins/Marketplace/resources/qml/PackagePage.qml:176 msgctxt "@info No materials" msgid "None" msgstr "Geen" #: plugins/Marketplace/resources/qml/PackagePage.qml:193 msgctxt "@header" msgid "Compatible with Material Station" msgstr "Compatibel met Material Station" #: plugins/Marketplace/resources/qml/PackagePage.qml:202 #: plugins/Marketplace/resources/qml/PackagePage.qml:228 msgctxt "@info" msgid "No" msgstr "Nee" #: plugins/Marketplace/resources/qml/PackagePage.qml:202 #: plugins/Marketplace/resources/qml/PackagePage.qml:228 msgctxt "@info" msgid "Yes" msgstr "Ja" #: plugins/Marketplace/resources/qml/PackagePage.qml:219 msgctxt "@header" msgid "Optimized for Air Manager" msgstr "Geoptimaliseerd voor Air Manager" #: plugins/Marketplace/resources/qml/PackagePage.qml:243 msgctxt "@button" msgid "Visit plug-in website" msgstr "Bezoek de plug-in-website" #: plugins/Marketplace/resources/qml/PackagePage.qml:243 msgctxt "@button" msgid "Website" msgstr "Website" #: plugins/Marketplace/resources/qml/PackagePage.qml:252 msgctxt "@button" msgid "Buy spool" msgstr "Koop spoel" #: plugins/Marketplace/resources/qml/PackagePage.qml:261 msgctxt "@button" msgid "Safety datasheet" msgstr "Informatieblad veiligheid" #: plugins/Marketplace/resources/qml/PackagePage.qml:270 msgctxt "@button" msgid "Technical datasheet" msgstr "Technisch informatieblad" #: plugins/Marketplace/resources/qml/Packages.qml:151 msgctxt "@button" msgid "Failed to load packages:" msgstr "Kan pakketten niet laden:" #: plugins/Marketplace/resources/qml/Packages.qml:151 msgctxt "@button" msgid "Retry?" msgstr "Opnieuw proberen?" #: plugins/Marketplace/resources/qml/Packages.qml:167 msgctxt "@button" msgid "Loading" msgstr "Laden" #: plugins/Marketplace/resources/qml/Packages.qml:183 msgctxt "@message" msgid "No more results to load" msgstr "Geen resultaten meer om te laden" #: plugins/Marketplace/resources/qml/Packages.qml:183 msgctxt "@message" msgid "No results found with current filter" msgstr "Geen resultaten gevonden met huidige filter" #: plugins/Marketplace/resources/qml/Packages.qml:226 msgctxt "@button" msgid "Load more" msgstr "Meer laden" #: plugins/Marketplace/resources/qml/Plugins.qml:8 msgctxt "@header" msgid "Install Plugins" msgstr "Plugins installeren" #: plugins/Marketplace/resources/qml/Plugins.qml:12 msgctxt "@text" msgid "Streamline your workflow and customize your UltiMaker Cura experience with plugins contributed by our amazing community of users." msgstr "Stroomlijn uw workflow en pas uw UltiMaker Cura-ervaring aan de eisen aan met plugins die zijn geleverd door onze fantastische gebruikersgemeenschap." #: plugins/Marketplace/resources/qml/VerifiedIcon.qml:21 msgctxt "@info" msgid "UltiMaker Verified Plug-in" msgstr "Geverifieerde UltiMaker-plug-in" #: plugins/Marketplace/resources/qml/VerifiedIcon.qml:22 msgctxt "@info" msgid "UltiMaker Certified Material" msgstr "Gecertificeerd UltiMaker-materiaal" #: plugins/Marketplace/resources/qml/VerifiedIcon.qml:23 msgctxt "@info" msgid "UltiMaker Verified Package" msgstr "Geverifieerd UltiMaker-pakket" #: plugins/ModelChecker/ModelChecker.py:31 msgctxt "@info:title" msgid "3D Model Assistant" msgstr "3D-modelassistent" #: plugins/ModelChecker/ModelChecker.py:97 #, python-brace-format msgctxt "@info:status" msgid "" "

    One or more 3D models may not print optimally due to the model size and material configuration:

    \n" "

    {model_names}

    \n" "

    Find out how to ensure the best possible print quality and reliability.

    \n" "

    View print quality guide

    " msgstr "" "

    Een of meer 3D-modellen worden mogelijk niet optimaal geprint vanwege het modelformaat en de materiaalconfiguratie:

    \n" "

    {model_names}

    \n" "

    Ontdek hoe u de best mogelijke printkwaliteit en betrouwbaarheid verkrijgt.

    \n" "

    Handleiding printkwaliteit bekijken

    " #: plugins/ModelChecker/plugin.json msgctxt "description" msgid "Checks models and print configuration for possible printing issues and give suggestions." msgstr "Via deze optie controleert u de modellen en de printconfiguratie op mogelijke printproblemen en ontvangt u suggesties." #: plugins/ModelChecker/plugin.json msgctxt "name" msgid "Model Checker" msgstr "Modelcontrole" #: plugins/MonitorStage/MonitorMain.qml:100 msgctxt "@info" msgid "" "Please make sure your printer has a connection:\n" "- Check if the printer is turned on.\n" "- Check if the printer is connected to the network.\n" "- Check if you are signed in to discover cloud-connected printers." msgstr "" "Controleer of de printer verbonden is:\n" "- Controleer of de printer ingeschakeld is.\n" "- Controleer of de printer verbonden is met het netwerk.\n" "- Controleer of u bent aangemeld om met de cloud verbonden printers te detecteren." #: plugins/MonitorStage/MonitorMain.qml:113 msgctxt "@info" msgid "Please connect your printer to the network." msgstr "Verbind uw printer met het netwerk." #: plugins/MonitorStage/MonitorMain.qml:148 msgctxt "@label link to technical assistance" msgid "View user manuals online" msgstr "Gebruikershandleidingen online weergegeven" #: plugins/MonitorStage/MonitorMain.qml:164 msgctxt "@info" msgid "In order to monitor your print from Cura, please connect the printer." msgstr "Sluit de printer aan om uw printopdracht vanuit Cura te volgen." #: plugins/MonitorStage/__init__.py:14 msgctxt "@item:inmenu" msgid "Monitor" msgstr "Controleren" #: plugins/MonitorStage/plugin.json msgctxt "name" msgid "Monitor Stage" msgstr "Controlestadium" #: plugins/MonitorStage/plugin.json msgctxt "description" msgid "Provides a monitor stage in Cura." msgstr "Deze optie biedt een controlestadium in Cura." #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41 msgctxt "@label" msgid "Mesh Type" msgstr "Rastertype" #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81 msgctxt "@label" msgid "Normal model" msgstr "Normaal model" #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96 msgctxt "@label" msgid "Print as support" msgstr "Printen als supportstructuur" #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111 msgctxt "@label" msgid "Modify settings for overlaps" msgstr "Instellingen aanpassen voor overlapping" #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126 msgctxt "@label" msgid "Don't support overlaps" msgstr "Supportstructuur niet laten overlappen" #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160 msgctxt "@item:inlistbox" msgid "Infill mesh only" msgstr "Alleen vulraster" #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:161 msgctxt "@item:inlistbox" msgid "Cutting mesh" msgstr "Snijdend raster" #: plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:386 msgctxt "@action:button" msgid "Select settings" msgstr "Instellingen selecteren" #: plugins/PerObjectSettingsTool/SettingPickDialog.qml:17 msgctxt "@title:window" msgid "Select Settings to Customize for this model" msgstr "Instellingen Selecteren om Dit Model Aan te Passen" #: plugins/PerObjectSettingsTool/SettingPickDialog.qml:61 #: resources/qml/Preferences/SettingVisibilityPage.qml:102 msgctxt "@label:textbox" msgid "Filter..." msgstr "Filteren..." #: plugins/PerObjectSettingsTool/SettingPickDialog.qml:75 msgctxt "@label:checkbox" msgid "Show all" msgstr "Alles weergeven" #: plugins/PerObjectSettingsTool/__init__.py:14 msgctxt "@label" msgid "Per Model Settings" msgstr "Instellingen per Model" #: plugins/PerObjectSettingsTool/__init__.py:15 msgctxt "@info:tooltip" msgid "Configure Per Model Settings" msgstr "Instellingen per Model configureren" #: plugins/PerObjectSettingsTool/plugin.json msgctxt "name" msgid "Per Model Settings Tool" msgstr "Gereedschap voor Instellingen per Model" #: plugins/PerObjectSettingsTool/plugin.json msgctxt "description" msgid "Provides the Per Model Settings." msgstr "Biedt de Instellingen per Model." #: plugins/PostProcessingPlugin/PostProcessingPlugin.py:35 msgctxt "@item:inmenu" msgid "Post Processing" msgstr "Nabewerking" #: plugins/PostProcessingPlugin/PostProcessingPlugin.py:36 msgctxt "@item:inmenu" msgid "Modify G-Code" msgstr "G-code wijzigen" #: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17 msgctxt "@title:window" msgid "Post Processing Plugin" msgstr "Plug-in voor Nabewerking" #: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57 msgctxt "@label" msgid "Post Processing Scripts" msgstr "Scripts voor Nabewerking" #: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:215 msgctxt "@action" msgid "Add a script" msgstr "Een script toevoegen" #: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:251 msgctxt "@label" msgid "Settings" msgstr "Instellingen" #: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:460 msgctxt "@info:tooltip" msgid "Change active post-processing scripts." msgstr "Actieve scripts voor nabewerking wijzigen." #: plugins/PostProcessingPlugin/PostProcessingPlugin.qml:464 msgctxt "@info:tooltip" msgid "The following script is active:" msgid_plural "The following scripts are active:" msgstr[0] "Het volgende script is actief:" msgstr[1] "De volgende scripts zijn actief:" #: plugins/PostProcessingPlugin/plugin.json msgctxt "description" msgid "Extension that allows for user created scripts for post processing" msgstr "Uitbreiding waarmee door de gebruiker gemaakte scripts voor nabewerking kunnen worden gebruikt" #: plugins/PostProcessingPlugin/plugin.json msgctxt "name" msgid "Post Processing" msgstr "Nabewerking" #: plugins/PrepareStage/PrepareMenu.qml:74 msgctxt "@button" msgid "Add printer" msgstr "Printer toevoegen" #: plugins/PrepareStage/PrepareMenu.qml:90 msgctxt "@button" msgid "Manage printers" msgstr "Printers beheren" #: plugins/PrepareStage/__init__.py:12 msgctxt "@item:inmenu" msgid "Prepare" msgstr "Voorbereiden" #: plugins/PrepareStage/plugin.json msgctxt "name" msgid "Prepare Stage" msgstr "Stadium voorbereiden" #: plugins/PrepareStage/plugin.json msgctxt "description" msgid "Provides a prepare stage in Cura." msgstr "Deze optie biedt een voorbereidingsstadium in Cura." #: plugins/PreviewStage/__init__.py:13 msgctxt "@item:inmenu" msgid "Preview" msgstr "Voorbeeld" #: plugins/PreviewStage/plugin.json msgctxt "name" msgid "Preview Stage" msgstr "Voorbeeldstadium" #: plugins/PreviewStage/plugin.json msgctxt "description" msgid "Provides a preview stage in Cura." msgstr "Deze optie biedt een voorbeeldstadium in Cura." #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." msgid "Save to Removable Drive" msgstr "Opslaan op verwisselbaar station" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24 #, python-brace-format msgctxt "@item:inlistbox" msgid "Save to Removable Drive {0}" msgstr "Opslaan op Verwisselbaar Station {0}" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 #: plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118 msgctxt "@info:status" msgid "There are no file formats available to write with!" msgstr "Er zijn geen bestandsindelingen beschikbaar om te schrijven!" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109 #, python-brace-format msgctxt "@info:progress Don't translate the XML tags !" msgid "Saving to Removable Drive {0}" msgstr "Opslaan op Verwisselbaar Station {0}" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:110 msgctxt "@info:title" msgid "Saving" msgstr "Opslaan" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:120 #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" msgstr "Kan niet opslaan als {0}: {1}" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." msgstr "Kan geen bestandsnaam vinden tijdens het schrijven naar {device}." #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:152 #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:171 #, python-brace-format msgctxt "@info:status" msgid "Could not save to removable drive {0}: {1}" msgstr "Kan niet opslaan op verwisselbaar station {0}: {1}" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:162 #, python-brace-format msgctxt "@info:status" msgid "Saved to Removable Drive {0} as {1}" msgstr "Opgeslagen op Verwisselbaar Station {0} als {1}" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163 msgctxt "@info:title" msgid "File Saved" msgstr "Bestand opgeslagen" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 msgctxt "@action:button" msgid "Eject" msgstr "Uitwerpen" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 #, python-brace-format msgctxt "@action" msgid "Eject removable device {0}" msgstr "Verwisselbaar station {0} uitwerpen" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:184 #, python-brace-format msgctxt "@info:status" msgid "Ejected {0}. You can now safely remove the drive." msgstr "{0} is uitgeworpen. U kunt het station nu veilig verwijderen." #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:185 msgctxt "@info:title" msgid "Safely Remove Hardware" msgstr "Hardware veilig verwijderen" #: plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:188 #, python-brace-format msgctxt "@info:status" msgid "Failed to eject {0}. Another program may be using the drive." msgstr "Uitwerpen van {0} is niet gelukt. Mogelijk wordt het station door een ander programma gebruikt." #: plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76 msgctxt "@item:intext" msgid "Removable Drive" msgstr "Verwisselbaar Station" #: plugins/RemovableDriveOutputDevice/plugin.json msgctxt "description" msgid "Provides removable drive hotplugging and writing support." msgstr "Biedt hotplug- en schrijfondersteuning voor verwisselbare stations." #: plugins/RemovableDriveOutputDevice/plugin.json msgctxt "name" msgid "Removable Drive Output Device Plugin" msgstr "Plug-in voor Verwijderbaar Uitvoerapparaat" #: plugins/SentryLogger/plugin.json msgctxt "description" msgid "Logs certain events so that they can be used by the crash reporter" msgstr "Hiermee worden bepaalde gebeurtenissen geregistreerd, zodat deze door de crashrapportage kunnen worden gebruikt" #: plugins/SentryLogger/plugin.json msgctxt "name" msgid "Sentry Logger" msgstr "Sentrylogger" #: plugins/SimulationView/SimulationView.py:129 msgctxt "@info:status" msgid "Nothing is shown because you need to slice first." msgstr "Er wordt niets weergegeven omdat u eerst moet slicen." #: plugins/SimulationView/SimulationView.py:130 msgctxt "@info:title" msgid "No layers to show" msgstr "Geen lagen om weer te geven" #: plugins/SimulationView/SimulationView.py:132 #: plugins/SolidView/SolidView.py:74 msgctxt "@info:option_text" msgid "Do not show this message again" msgstr "Dit bericht niet meer weergeven" #: plugins/SimulationView/SimulationViewMenuComponent.qml:18 #: plugins/SimulationView/SimulationViewMenuComponent.qml:47 msgctxt "@label" msgid "Color scheme" msgstr "Kleurenschema" #: plugins/SimulationView/SimulationViewMenuComponent.qml:104 msgctxt "@label:listbox" msgid "Material Color" msgstr "Materiaalkleur" #: plugins/SimulationView/SimulationViewMenuComponent.qml:108 msgctxt "@label:listbox" msgid "Line Type" msgstr "Lijntype" #: plugins/SimulationView/SimulationViewMenuComponent.qml:112 msgctxt "@label:listbox" msgid "Speed" msgstr "Snelheid" #: plugins/SimulationView/SimulationViewMenuComponent.qml:116 msgctxt "@label:listbox" msgid "Layer Thickness" msgstr "Laagdikte" #: plugins/SimulationView/SimulationViewMenuComponent.qml:120 msgctxt "@label:listbox" msgid "Line Width" msgstr "Lijnbreedte" #: plugins/SimulationView/SimulationViewMenuComponent.qml:124 msgctxt "@label:listbox" msgid "Flow" msgstr "Doorvoer" #: plugins/SimulationView/SimulationViewMenuComponent.qml:164 msgctxt "@label" msgid "Compatibility Mode" msgstr "Compatibiliteitsmodus" #: plugins/SimulationView/SimulationViewMenuComponent.qml:231 msgctxt "@label" msgid "Travels" msgstr "Bewegingen" #: plugins/SimulationView/SimulationViewMenuComponent.qml:237 msgctxt "@label" msgid "Helpers" msgstr "Helpers" #: plugins/SimulationView/SimulationViewMenuComponent.qml:243 msgctxt "@label" msgid "Shell" msgstr "Shell" #: plugins/SimulationView/SimulationViewMenuComponent.qml:249 msgctxt "@label" msgid "Infill" msgstr "Vulling" #: plugins/SimulationView/SimulationViewMenuComponent.qml:257 msgctxt "@label" msgid "Starts" msgstr "Wordt gestart" #: plugins/SimulationView/SimulationViewMenuComponent.qml:304 msgctxt "@label" msgid "Only Show Top Layers" msgstr "Alleen bovenlagen weergegeven" #: plugins/SimulationView/SimulationViewMenuComponent.qml:313 msgctxt "@label" msgid "Show 5 Detailed Layers On Top" msgstr "5 gedetailleerde lagen bovenaan weergeven" #: plugins/SimulationView/SimulationViewMenuComponent.qml:326 msgctxt "@label" msgid "Top / Bottom" msgstr "Boven-/onderkant" #: plugins/SimulationView/SimulationViewMenuComponent.qml:330 msgctxt "@label" msgid "Inner Wall" msgstr "Binnenwand" #: plugins/SimulationView/SimulationViewMenuComponent.qml:397 msgctxt "@label" msgid "min" msgstr "min" #: plugins/SimulationView/SimulationViewMenuComponent.qml:462 msgctxt "@label" msgid "max" msgstr "max" #: plugins/SimulationView/__init__.py:15 msgctxt "@item:inlistbox" msgid "Layer view" msgstr "Laagweergave" #: plugins/SimulationView/plugin.json msgctxt "description" msgid "Provides the preview of sliced layerdata." msgstr "Biedt voorbeeld van geslicete laaggegevens." #: plugins/SimulationView/plugin.json msgctxt "name" msgid "Simulation View" msgstr "Simulatieweergave" #: plugins/SliceInfoPlugin/MoreInfoWindow.qml:16 msgctxt "@title:window" msgid "More information on anonymous data collection" msgstr "Meer informatie over anonieme gegevensverzameling" #: plugins/SliceInfoPlugin/MoreInfoWindow.qml:73 msgctxt "@text:window" msgid "UltiMaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:" msgstr "UltiMaker Cura verzamelt anonieme gegevens om de printkwaliteit en gebruikerservaring te verbeteren. Hieronder ziet u een voorbeeld van alle gegevens die worden gedeeld:" #: plugins/SliceInfoPlugin/MoreInfoWindow.qml:107 msgctxt "@text:window" msgid "I don't want to send anonymous data" msgstr "Ik wil geen anonieme gegevens verzenden" #: plugins/SliceInfoPlugin/MoreInfoWindow.qml:116 msgctxt "@text:window" msgid "Allow sending anonymous data" msgstr "Verzenden van anonieme gegevens toestaan" #: plugins/SliceInfoPlugin/SliceInfo.py:95 msgctxt "@text" msgid "Unable to read example data file." msgstr "Kan het voorbeeldgegevensbestand niet lezen." #: plugins/SliceInfoPlugin/plugin.json msgctxt "name" msgid "Slice info" msgstr "Slice-informatie" #: plugins/SliceInfoPlugin/plugin.json msgctxt "description" msgid "Submits anonymous slice info. Can be disabled through preferences." msgstr "Verzendt anonieme slice-informatie. Dit kan bij de voorkeuren worden uitgeschakeld." #: plugins/SolidView/SolidView.py:71 msgctxt "@info:status" msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura." msgstr "De gemarkeerde gebieden geven ofwel ontbrekende of ongebruikelijke oppervlakken aan. Corrigeer het model en open het opnieuw in Cura." #: plugins/SolidView/SolidView.py:73 msgctxt "@info:title" msgid "Model Errors" msgstr "Modelfouten" #: plugins/SolidView/__init__.py:12 msgctxt "@item:inmenu" msgid "Solid view" msgstr "Solide weergave" #: plugins/SolidView/plugin.json msgctxt "description" msgid "Provides a normal solid mesh view." msgstr "Biedt een normale, solide rasterweergave." #: plugins/SolidView/plugin.json msgctxt "name" msgid "Solid View" msgstr "Solide weergave" #: plugins/SupportEraser/__init__.py:12 msgctxt "@label" msgid "Support Blocker" msgstr "Supportblokkering" #: plugins/SupportEraser/__init__.py:13 msgctxt "@info:tooltip" msgid "Create a volume in which supports are not printed." msgstr "Maak een volume waarin supportstructuren niet worden geprint." #: plugins/SupportEraser/plugin.json msgctxt "description" msgid "Creates an eraser mesh to block the printing of support in certain places" msgstr "Hiermee maakt u een wisraster om het printen van een supportstructuur op bepaalde plekken te blokkeren" #: plugins/SupportEraser/plugin.json msgctxt "name" msgid "Support Eraser" msgstr "Supportwisser" #: plugins/TrimeshReader/__init__.py:15 msgctxt "@item:inlistbox 'Open' is part of the name of this file format." msgid "Open Compressed Triangle Mesh" msgstr "Gecomprimeerde driehoeksnet openen" #: plugins/TrimeshReader/__init__.py:19 msgctxt "@item:inlistbox" msgid "COLLADA Digital Asset Exchange" msgstr "COLLADA Digital Asset Exchange" #: plugins/TrimeshReader/__init__.py:23 msgctxt "@item:inlistbox" msgid "glTF Binary" msgstr "glTF-binair" #: plugins/TrimeshReader/__init__.py:27 msgctxt "@item:inlistbox" msgid "glTF Embedded JSON" msgstr "glTF-ingesloten JSON" #: plugins/TrimeshReader/__init__.py:36 msgctxt "@item:inlistbox" msgid "Stanford Triangle Format" msgstr "Stanford-driehoeksformaat" #: plugins/TrimeshReader/__init__.py:40 msgctxt "@item:inlistbox" msgid "Compressed COLLADA Digital Asset Exchange" msgstr "Gecomprimeerde COLLADA Digital Asset Exchange" #: plugins/TrimeshReader/plugin.json msgctxt "description" msgid "Provides support for reading model files." msgstr "Biedt ondersteuning voor het lezen van modelbestanden." #: plugins/TrimeshReader/plugin.json msgctxt "name" msgid "Trimesh Reader" msgstr "Trimesh-lezer" #: plugins/UFPReader/__init__.py:22 plugins/UFPWriter/__init__.py:28 msgctxt "@item:inlistbox" msgid "UltiMaker Format Package" msgstr "UltiMaker Format Package" #: plugins/UFPReader/plugin.json msgctxt "description" msgid "Provides support for reading Ultimaker Format Packages." msgstr "Deze optie biedt ondersteuning voor het lezen van UltiMaker Format Packages." #: plugins/UFPReader/plugin.json msgctxt "name" msgid "UFP Reader" msgstr "UFP-lezer" #: plugins/UFPWriter/UFPWriter.py:64 plugins/UFPWriter/UFPWriter.py:80 #: plugins/UFPWriter/UFPWriter.py:93 plugins/UFPWriter/UFPWriter.py:115 #: plugins/UFPWriter/UFPWriter.py:170 plugins/UFPWriter/UFPWriter.py:180 msgctxt "@info:error" msgid "Can't write to UFP file:" msgstr "Kan niet naar UFP-bestand schrijven:" #: plugins/UFPWriter/plugin.json msgctxt "description" msgid "Provides support for writing Ultimaker Format Packages." msgstr "Deze optie biedt ondersteuning voor het schrijven van UltiMaker Format Packages." #: plugins/UFPWriter/plugin.json msgctxt "name" msgid "UFP Writer" msgstr "UFP-schrijver" #: plugins/UM3NetworkPrinting/plugin.json msgctxt "description" msgid "Manages network connections to UltiMaker networked printers." msgstr "Hiermee beheert u netwerkverbindingen naar UltiMaker-netwerkprinters." #: plugins/UM3NetworkPrinting/plugin.json msgctxt "name" msgid "UltiMaker Network Connection" msgstr "UltiMaker-netwerkverbinding" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44 msgctxt "@title:window" msgid "Connect to Networked Printer" msgstr "Verbinding Maken met Printer in het Netwerk" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51 msgctxt "@label" msgid "Select your printer from the list below:" msgstr "Selecteer uw printer in de onderstaande lijst:" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51 msgctxt "@label" msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer." msgstr "Als u rechtstreeks via het netwerk wilt printen naar de printer, moet u ervoor zorgen dat de printer met een netwerkkabel is verbonden met het netwerk of moet u verbinding maken met de printer via het wifi-netwerk. Als u geen verbinding maakt tussen Cura en de printer, kunt u een USB-station gebruiken om G-code-bestanden naar de printer over te zetten." #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71 msgctxt "@action:button" msgid "Edit" msgstr "Bewerken" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82 #: resources/qml/Preferences/MachinesPage.qml:153 #: resources/qml/Preferences/Materials/MaterialsPage.qml:186 #: resources/qml/Preferences/ProfilesPage.qml:321 msgctxt "@action:button" msgid "Remove" msgstr "Verwijderen" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90 msgctxt "@action:button" msgid "Refresh" msgstr "Vernieuwen" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161 msgctxt "@label" msgid "If your printer is not listed, read the network printing troubleshooting guide" msgstr "Raadpleeg de handleiding voor probleemoplossing bij printen via het netwerk als uw printer niet in de lijst wordt vermeld" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186 #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:247 msgctxt "@label" msgid "Type" msgstr "Type" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202 #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:256 msgctxt "@label" msgid "Firmware version" msgstr "Firmwareversie" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212 #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:266 msgctxt "@label" msgid "Address" msgstr "Adres" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232 msgctxt "@label" msgid "This printer is not set up to host a group of printers." msgstr "Deze printer is niet ingesteld voor het hosten van een groep printers." #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236 msgctxt "@label" msgid "This printer is the host for a group of %1 printers." msgstr "Deze printer is de host voor een groep van %1 printers." #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245 msgctxt "@label" msgid "The printer at this address has not yet responded." msgstr "De printer op dit adres heeft nog niet gereageerd." #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250 msgctxt "@action:button" msgid "Connect" msgstr "Verbinden" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261 msgctxt "@title:window" msgid "Invalid IP address" msgstr "Ongeldig IP-adres" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262 #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:141 msgctxt "@text" msgid "Please enter a valid IP address." msgstr "Voer een geldig IP-adres in." #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272 msgctxt "@title:window" msgid "Printer Address" msgstr "Printeradres" #: plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:97 msgctxt "@label" msgid "Enter the IP address of your printer on the network." msgstr "Voer het IP-adres van uw printer in het netwerk in." #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20 msgctxt "@title:window" msgid "Configuration Changes" msgstr "Configuratiewijzigingen" #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36 msgctxt "@action:button" msgid "Override" msgstr "Overschrijven" #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83 msgctxt "@label" msgid "The assigned printer, %1, requires the following configuration change:" msgid_plural "The assigned printer, %1, requires the following configuration changes:" msgstr[0] "Voor de toegewezen printer, %1, is de volgende configuratiewijziging vereist:" msgstr[1] "Voor de toegewezen printer, %1, zijn de volgende configuratiewijzigingen vereist:" #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87 msgctxt "@label" msgid "The printer %1 is assigned, but the job contains an unknown material configuration." msgstr "De printer %1 is toegewezen. De taak bevat echter een onbekende materiaalconfiguratie." #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97 msgctxt "@label" msgid "Change material %1 from %2 to %3." msgstr "Wijzig het materiaal %1 van %2 in %3." #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100 msgctxt "@label" msgid "Load %3 as material %1 (This cannot be overridden)." msgstr "Laad %3 als materiaal %1 (kan niet worden overschreven)." #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103 msgctxt "@label" msgid "Change print core %1 from %2 to %3." msgstr "Wijzig de print core %1 van %2 in %3." #: plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:110 msgctxt "@label" msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print." msgstr "Met het overschrijven worden de opgegeven instellingen gebruikt met de bestaande printerconfiguratie. De print kan hierdoor mislukken." #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144 msgctxt "@label" msgid "Move to top" msgstr "Plaats bovenaan" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:155 msgctxt "@label" msgid "Delete" msgstr "Verwijderen" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:186 #: resources/qml/MonitorButton.qml:284 msgctxt "@label" msgid "Resume" msgstr "Hervatten" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:188 msgctxt "@label" msgid "Pausing..." msgstr "Pauzeren..." #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:190 msgctxt "@label" msgid "Resuming..." msgstr "Hervatten..." #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:192 #: resources/qml/MonitorButton.qml:279 resources/qml/MonitorButton.qml:288 msgctxt "@label" msgid "Pause" msgstr "Pauzeren" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:206 msgctxt "@label" msgid "Abort" msgstr "Afbreken" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:206 msgctxt "@label" msgid "Aborting..." msgstr "Afbreken..." #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:218 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to move %1 to the top of the queue?" msgstr "Weet u zeker dat u %1 bovenaan de wachtrij wilt plaatsen?" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:219 msgctxt "@window:title" msgid "Move print job to top" msgstr "Plaats printtaak bovenaan" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:227 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to delete %1?" msgstr "Weet u zeker dat u %1 wilt verwijderen?" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:228 msgctxt "@window:title" msgid "Delete print job" msgstr "Printtaak verwijderen" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:236 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to abort %1?" msgstr "Weet u zeker dat u %1 wilt afbreken?" #: plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:237 #: resources/qml/MonitorButton.qml:326 msgctxt "@window:title" msgid "Abort print" msgstr "Printen afbreken" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126 msgctxt "@label" msgid "Unavailable printer" msgstr "Niet‑beschikbare printer" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128 msgctxt "@label" msgid "First available" msgstr "Eerst beschikbaar" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:242 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:246 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:472 msgctxt "@info" msgid "Please update your printer's firmware to manage the queue remotely." msgstr "Werk de firmware van uw printer bij om de wachtrij op afstand te beheren." #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 msgctxt "@label:status" msgid "Aborted" msgstr "Afgebroken" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74 msgctxt "@label:status" msgid "Finished" msgstr "Gereed" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356 msgctxt "@label:status" msgid "Preparing..." msgstr "Voorbereiden..." #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 msgctxt "@label:status" msgid "Aborting..." msgstr "Afbreken..." #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 msgctxt "@label:status" msgid "Failed" msgstr "Mislukt" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98 msgctxt "@label:status" msgid "Pausing..." msgstr "Pauzeren..." #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100 msgctxt "@label:status" msgid "Paused" msgstr "Gepauzeerd" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102 msgctxt "@label:status" msgid "Resuming..." msgstr "Hervatten..." #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104 msgctxt "@label:status" msgid "Action required" msgstr "Handeling nodig" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106 msgctxt "@label:status" msgid "Finishes %1 at %2" msgstr "Voltooit %1 om %2" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148 msgctxt "@label link to Connect and Cloud interfaces" msgid "Manage printer" msgstr "Printer beheren" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:280 msgctxt "@info" msgid "Webcam feeds for cloud printers cannot be viewed from UltiMaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam." msgstr "Vanuit UltiMaker Cura kunt u de webcamfeeds voor cloudprinters niet bekijken. Klik op 'Printer beheren' om Ultimaker Digital Factory te bezoeken en deze webcam te bekijken." #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:340 msgctxt "@label:status" msgid "Loading..." msgstr "Laden..." #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:344 msgctxt "@label:status" msgid "Unavailable" msgstr "Niet beschikbaar" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348 msgctxt "@label:status" msgid "Unreachable" msgstr "Onbereikbaar" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352 msgctxt "@label:status" msgid "Idle" msgstr "Inactief" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:361 msgctxt "@label:status" msgid "Printing" msgstr "Printen" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:402 msgctxt "@label" msgid "Untitled" msgstr "Zonder titel" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:417 msgctxt "@label" msgid "Anonymous" msgstr "Anoniem" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:438 msgctxt "@label:status" msgid "Requires configuration changes" msgstr "Hiervoor zijn configuratiewijzigingen vereist" #: plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:452 msgctxt "@action:button" msgid "Details" msgstr "Details" #: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29 msgctxt "@label" msgid "Queued" msgstr "In wachtrij" #: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:64 msgctxt "@label link to connect manager" msgid "Manage in browser" msgstr "Beheren in browser" #: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:91 msgctxt "@label" msgid "There are no print jobs in the queue. Slice and send a job to add one." msgstr "Er staan geen afdruktaken in de wachtrij. Slice een taak en verzend deze om er een toe te voegen." #: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99 msgctxt "@label" msgid "Print jobs" msgstr "Printtaken" #: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:108 msgctxt "@label" msgid "Total print time" msgstr "Totale printtijd" #: plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:117 msgctxt "@label" msgid "Waiting for" msgstr "Wachten op" #: plugins/UM3NetworkPrinting/resources/qml/MonitorStage.qml:117 msgctxt "@info" msgid "Monitor your printers from everywhere using Ultimaker Digital Factory" msgstr "Monitor uw printers overal met Ultimaker Digital Factory" #: plugins/UM3NetworkPrinting/resources/qml/MonitorStage.qml:129 msgctxt "@button" msgid "View printers in Digital Factory" msgstr "Printers weergeven in Digital Factory" #: plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12 msgctxt "@title:window" msgid "Print over network" msgstr "Printen via netwerk" #: plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53 msgctxt "@action:button" msgid "Print" msgstr "Printen" #: plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81 msgctxt "@label" msgid "Printer selection" msgstr "Printerselectie" #: plugins/UM3NetworkPrinting/src/Cloud/AbstractCloudOutputDevice.py:80 #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:162 msgctxt "@action:button" msgid "Print via cloud" msgstr "Printen via Cloud" #: plugins/UM3NetworkPrinting/src/Cloud/AbstractCloudOutputDevice.py:81 #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:163 msgctxt "@properties:tooltip" msgid "Print via cloud" msgstr "Printen via Cloud" #: plugins/UM3NetworkPrinting/src/Cloud/AbstractCloudOutputDevice.py:82 #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:164 msgctxt "@info:status" msgid "Connected via cloud" msgstr "Verbonden via Cloud" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:276 msgctxt "@action:button" msgid "Monitor print" msgstr "Printen in de gaten houden" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:278 msgctxt "@action:tooltip" msgid "Track the print in Ultimaker Digital Factory" msgstr "Volg het printen in Ultimaker Digital Factory" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:298 #, python-brace-format msgctxt "@error:send" msgid "Unknown error code when uploading print job: {0}" msgstr "Onbekende foutcode bij uploaden printtaak: {0}" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422 #: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:23 msgctxt "info:name" msgid "Ultimaker Digital Factory" msgstr "Ultimaker Digital Factory" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:425 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "{printer_name} will be removed until the next account sync." msgstr "{printer_name} wordt verwijderd tot de volgende accountsynchronisatie." #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:426 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "To remove {printer_name} permanently, visit {digital_factory_link}" msgstr "Bezoek {digital_factory_link} om {printer_name} permanent te verwijderen" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:427 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "Are you sure you want to remove {printer_name} temporarily?" msgstr "Weet u zeker dat u {printer_name} tijdelijk wilt verwijderen?" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:474 msgctxt "@title:window" msgid "Remove printers?" msgstr "Printers verwijderen?" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:477 #, python-brace-format msgctxt "@label" msgid "" "You are about to remove {0} printer from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgid_plural "" "You are about to remove {0} printers from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgstr[0] "" "U staat op het punt om {0} printer uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\n" "Weet u zeker dat u door wilt gaan?" msgstr[1] "" "U staat op het punt om {0} printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\n" "Weet u zeker dat u door wilt gaan?" #: plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:484 msgctxt "@label" msgid "" "You are about to remove all printers from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgstr "" "U staat op het punt om alle printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\n" "Weet u zeker dat u door wilt gaan?" #: plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25 #, python-brace-format msgctxt "@info:status" msgid "" "Your printer {printer_name} could be connected via cloud.\n" " Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory" msgstr "" "U kunt uw printer {printer_name} via de cloud verbinden.\n" " Beheer uw printerwachtrij en controleer uw prints vanaf elke plek door uw printer te verbinden met Digital Factory" #: plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26 msgctxt "@info:title" msgid "Are you ready for cloud printing?" msgstr "Bent u klaar voor printen via de cloud?" #: plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30 msgctxt "@action" msgid "Get started" msgstr "Aan de slag" #: plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31 #: plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:24 msgctxt "@action" msgid "Learn more" msgstr "Meer informatie" #: plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18 msgctxt "@info:status" msgid "You are attempting to connect to a printer that is not running UltiMaker Connect. Please update the printer to the latest firmware." msgstr "U probeert verbinding te maken met een printer waarop UltiMaker Connect niet wordt uitgevoerd. Werk de printer bij naar de nieuwste firmware." #: plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21 msgctxt "@info:title" msgid "Update your printer" msgstr "Uw printer bijwerken" #: plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24 #, python-brace-format msgctxt "@info:status" msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}." msgstr "Cura heeft materiaalprofielen gedetecteerd die nog niet op de hostprinter van groep {0} zijn geïnstalleerd." #: plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26 msgctxt "@info:title" msgid "Sending materials to printer" msgstr "De materialen worden naar de printer verzonden" #: plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:13 msgctxt "info:status" msgid "New printer detected from your Ultimaker account" msgid_plural "New printers detected from your Ultimaker account" msgstr[0] "Nieuwe printer gedetecteerd van uw Ultimaker-account" msgstr[1] "Nieuwe printers gedetecteerd van uw Ultimaker-account" #: plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:29 #, python-brace-format msgctxt "info:status Filled in with printer name and printer model." msgid "Adding printer {name} ({model}) from your account" msgstr "Printer {name} ({model}) toevoegen vanaf uw account" #: plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:48 #, python-brace-format msgctxt "info:{0} gets replaced by a number of printers" msgid "... and {0} other" msgid_plural "... and {0} others" msgstr[0] "... en {0} andere" msgstr[1] "... en {0} andere" #: plugins/UM3NetworkPrinting/src/Messages/NewPrinterDetectedMessage.py:57 msgctxt "info:status" msgid "Printers added from Digital Factory:" msgstr "Printers toegevoegd vanuit Digital Factory:" #: plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27 #, python-brace-format msgctxt "@info:status" msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host." msgstr "U probeert verbinding te maken met {0}, maar deze is niet de host van een groep. U kunt de webpagina bezoeken om deze als groephost te configureren." #: plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30 msgctxt "@info:title" msgid "Not a group host" msgstr "Geen groephost" #: plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36 msgctxt "@action" msgid "Configure group" msgstr "Groep configureren" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:18 msgctxt "@info:status" msgid "You will receive a confirmation via email when the print job is approved" msgstr "U ontvangt een bevestiging via e-mail wanneer de printtaak is goedgekeurd" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:19 msgctxt "@info:title" msgid "The print job was successfully submitted" msgstr "De printtaak is succesvol ingediend" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobAwaitingApprovalMessage.py:22 msgctxt "@action" msgid "Manage print jobs" msgstr "Printtaken beheren" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15 msgctxt "@info:status" msgid "Please wait until the current job has been sent." msgstr "Wacht tot de huidige taak is verzonden." #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16 msgctxt "@info:title" msgid "Print error" msgstr "Printfout" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15 msgctxt "@info:text" msgid "Could not upload the data to the printer." msgstr "Kan de gegevens niet uploaden naar de printer." #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16 msgctxt "@info:title" msgid "Network error" msgstr "Netwerkfout" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15 msgctxt "@info:status" msgid "Sending Print Job" msgstr "Printtaak verzenden" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16 msgctxt "@info:status" msgid "Uploading print job to printer." msgstr "Printtaak naar printer aan het uploaden." #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16 msgctxt "@info:status" msgid "Print job queue is full. The printer can't accept a new job." msgstr "Wachtrij voor afdruktaken is vol. De printer kan geen nieuwe taken accepteren." #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17 msgctxt "@info:title" msgid "Queue Full" msgstr "Wachtrij vol" #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15 msgctxt "@info:status" msgid "Print job was successfully sent to the printer." msgstr "De printtaak is naar de printer verzonden." #: plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16 msgctxt "@info:title" msgid "Data Sent" msgstr "Gegevens verzonden" #: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:17 msgctxt "info:status" msgid "This printer is not linked to the Digital Factory:" msgid_plural "These printers are not linked to the Digital Factory:" msgstr[0] "Deze printer is niet gekoppeld aan de Digital Factory:" msgstr[1] "Deze printers zijn niet gekoppeld aan de Digital Factory:" #: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:29 #, python-brace-format msgctxt "info:status" msgid "To establish a connection, please visit the {website_link}" msgstr "Ga naar {website_link} om een verbinding tot stand te brengen" #: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:33 msgctxt "info:status" msgid "A cloud connection is not available for a printer" msgid_plural "A cloud connection is not available for some printers" msgstr[0] "Een cloudverbinding is niet beschikbaar voor een printer" msgstr[1] "Een cloudverbinding is niet beschikbaar voor meerdere printers" #: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:41 msgctxt "@action:button" msgid "Keep printer configurations" msgstr "Printerconfiguraties behouden" #: plugins/UM3NetworkPrinting/src/Messages/RemovedPrintersMessage.py:46 msgctxt "@action:button" msgid "Remove printers" msgstr "Printers verwijderen" #: plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:62 msgctxt "@action:button Preceded by 'Ready to'." msgid "Print over network" msgstr "Printen via netwerk" #: plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:63 msgctxt "@properties:tooltip" msgid "Print over network" msgstr "Printen via netwerk" #: plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:64 msgctxt "@info:status" msgid "Connected over the network" msgstr "Via het netwerk verbonden" #: plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28 msgctxt "@action" msgid "Connect via Network" msgstr "Verbinding Maken via Netwerk" #: plugins/UM3NetworkPrinting/src/Utils.py:27 msgctxt "@info:status" msgid "tomorrow" msgstr "morgen" #: plugins/UM3NetworkPrinting/src/Utils.py:30 msgctxt "@info:status" msgid "today" msgstr "vandaag" #: plugins/USBPrinting/USBPrinterOutputDevice.py:42 msgctxt "@item:inmenu" msgid "USB printing" msgstr "USB-printen" #: plugins/USBPrinting/USBPrinterOutputDevice.py:43 msgctxt "@action:button Preceded by 'Ready to'." msgid "Print via USB" msgstr "Printen via USB" #: plugins/USBPrinting/USBPrinterOutputDevice.py:44 msgctxt "@info:tooltip" msgid "Print via USB" msgstr "Via USB Printen" #: plugins/USBPrinting/USBPrinterOutputDevice.py:80 msgctxt "@info:status" msgid "Connected via USB" msgstr "Aangesloten via USB" #: plugins/USBPrinting/USBPrinterOutputDevice.py:110 msgctxt "@label" msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?" msgstr "Er wordt momenteel via USB geprint. Wanneer u Cura afsluit, wordt het printen gestopt. Weet u zeker dat u wilt afsluiten?" #: plugins/USBPrinting/USBPrinterOutputDevice.py:135 msgctxt "@message" msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed." msgstr "Er wordt nog een print afgedrukt. Cura kan pas een nieuwe print via USB starten zodra de vorige print is voltooid." #: plugins/USBPrinting/USBPrinterOutputDevice.py:136 msgctxt "@message" msgid "Print in Progress" msgstr "Bezig met printen" #: plugins/USBPrinting/plugin.json msgctxt "description" msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware." msgstr "Hiermee accepteert u G-code en verzendt u deze code naar een printer. Via de plug-in kan tevens de firmware worden bijgewerkt." #: plugins/USBPrinting/plugin.json msgctxt "name" msgid "USB printing" msgstr "USB-printen" #: plugins/UltimakerMachineActions/BedLevelMachineAction.py:24 msgctxt "@action" msgid "Level build plate" msgstr "Platform kalibreren" #: plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30 msgctxt "@title" msgid "Build Plate Leveling" msgstr "Platform Kalibreren" #: plugins/UltimakerMachineActions/BedLevelMachineAction.qml:42 msgctxt "@label" msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted." msgstr "Je kan nu je platform afstellen, zodat uw prints er altijd fantastisch uitzien. Als u op 'Naar de volgende positie bewegen' klikt, beweegt de nozzle naar de verschillende instelbare posities." #: plugins/UltimakerMachineActions/BedLevelMachineAction.qml:52 msgctxt "@label" msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle." msgstr "Voor elke positie legt u een stukje papier onder de nozzle en past u de hoogte van het printplatform aan. De hoogte van het printplatform is goed wanneer het papier net door de punt van de nozzle wordt meegenomen." #: plugins/UltimakerMachineActions/BedLevelMachineAction.qml:67 msgctxt "@action:button" msgid "Start Build Plate Leveling" msgstr "Kalibratie Platform Starten" #: plugins/UltimakerMachineActions/BedLevelMachineAction.qml:79 msgctxt "@action:button" msgid "Move to Next Position" msgstr "Beweeg Naar de Volgende Positie" #: plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21 msgctxt "@action" msgid "Select upgrades" msgstr "Upgrades selecteren" #: plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30 msgctxt "@label" msgid "Please select any upgrades made to this UltiMaker Original" msgstr "Selecteer eventuele upgrades die op deze UltiMaker Original zijn uitgevoerd" #: plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:39 msgctxt "@label" msgid "Heated Build Plate (official kit or self-built)" msgstr "Verwarmd Platform (officiële kit of zelf gebouwd)" #: plugins/UltimakerMachineActions/plugin.json msgctxt "description" msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)." msgstr "Biedt machineacties voor UltiMaker-machines (zoals wizard voor bedkalibratie, selecteren van upgrades, enz.)" #: plugins/UltimakerMachineActions/plugin.json msgctxt "name" msgid "UltiMaker machine actions" msgstr "Acties UltiMaker-machines" #: plugins/VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.1 naar Cura 2.2." #: plugins/VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "name" msgid "Version Upgrade 2.1 to 2.2" msgstr "Versie-upgrade van 2.1 naar 2.2" #: plugins/VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.2 to Cura 2.4." msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.2 naar Cura 2.4." #: plugins/VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "name" msgid "Version Upgrade 2.2 to 2.4" msgstr "Versie-upgrade van 2.2 naar 2.4" #: plugins/VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.5 naar Cura 2.6." #: plugins/VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "name" msgid "Version Upgrade 2.5 to 2.6" msgstr "Versie-upgrade van 2.5 naar 2.6" #: plugins/VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.6 to Cura 2.7." msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.6 naar Cura 2.7." #: plugins/VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "name" msgid "Version Upgrade 2.6 to 2.7" msgstr "Versie-upgrade van 2.6 naar 2.7" #: plugins/VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.7 naar Cura 3.0." #: plugins/VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" msgid "Version Upgrade 2.7 to 3.0" msgstr "Versie-upgrade van 2.7 naar 3.0" #: plugins/VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.0 to Cura 3.1." msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.0 naar Cura 3.1." #: plugins/VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "name" msgid "Version Upgrade 3.0 to 3.1" msgstr "Versie-upgrade van 3.0 naar 3.1" #: plugins/VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.2 to Cura 3.3." msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.2 naar Cura 3.3." #: plugins/VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "name" msgid "Version Upgrade 3.2 to 3.3" msgstr "Versie-upgrade van 3.2 naar 3.3" #: plugins/VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.3 to Cura 3.4." msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.3 naar Cura 3.4." #: plugins/VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "name" msgid "Version Upgrade 3.3 to 3.4" msgstr "Versie-upgrade van 3.3 naar 3.4" #: plugins/VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.4 to Cura 3.5." msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.4 naar Cura 3.5." #: plugins/VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "name" msgid "Version Upgrade 3.4 to 3.5" msgstr "Versie-upgrade van 3.4 naar 3.5" #: plugins/VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.5 to Cura 4.0." msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.5 naar Cura 4.0." #: plugins/VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "name" msgid "Version Upgrade 3.5 to 4.0" msgstr "Versie-upgrade van 3.5 naar 4.0" #: plugins/VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.0 to Cura 4.1." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.0 naar Cura 4.1." #: plugins/VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "name" msgid "Version Upgrade 4.0 to 4.1" msgstr "Versie-upgrade van 4.0 naar 4.1" #: plugins/VersionUpgrade/VersionUpgrade411to412/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.11 to Cura 4.12." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.11 naar Cura 4.12." #: plugins/VersionUpgrade/VersionUpgrade411to412/plugin.json msgctxt "name" msgid "Version Upgrade 4.11 to 4.12" msgstr "Versie-upgrade van 4.11 naar 4.12" #: plugins/VersionUpgrade/VersionUpgrade413to50/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.13 to Cura 5.0." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.13 naar Cura 5.0." #: plugins/VersionUpgrade/VersionUpgrade413to50/plugin.json msgctxt "name" msgid "Version Upgrade 4.13 to 5.0" msgstr "Versie-upgrade 4.13 naar 5.0" #: plugins/VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.1 to Cura 4.2." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.1 naar Cura 4.2." #: plugins/VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "name" msgid "Version Upgrade 4.1 to 4.2" msgstr "Versie-upgrade van 4.1 naar 4.2" #: plugins/VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.2 to Cura 4.3." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.2 naar Cura 4.3." #: plugins/VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "name" msgid "Version Upgrade 4.2 to 4.3" msgstr "Versie-upgrade van 4.2 naar 4.3" #: plugins/VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.3 to Cura 4.4." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.3 naar Cura 4.4." #: plugins/VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "name" msgid "Version Upgrade 4.3 to 4.4" msgstr "Versie-upgrade van 4.3 naar 4.4" #: plugins/VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.4 to Cura 4.5." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.4 naar Cura 4.5." #: plugins/VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "name" msgid "Version Upgrade 4.4 to 4.5" msgstr "Versie-upgrade van 4.4 naar 4.5" #: plugins/VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.5 to Cura 4.6." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.5 naar Cura 4.6." #: plugins/VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "name" msgid "Version Upgrade 4.5 to 4.6" msgstr "Versie-upgrade van 4.5 naar 4.6" #: plugins/VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.6.0 naar Cura 4.6.2." #: plugins/VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "name" msgid "Version Upgrade 4.6.0 to 4.6.2" msgstr "Versie-upgrade van 4.6.0 naar 4.6.2" #: plugins/VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.6.2 naar Cura 4.7." #: plugins/VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "name" msgid "Version Upgrade 4.6.2 to 4.7" msgstr "Versie-upgrade van 4.6.2 naar 4.7" #: plugins/VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.7 to Cura 4.8." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.7 naar Cura 4.8." #: plugins/VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "name" msgid "Version Upgrade 4.7 to 4.8" msgstr "Versie-upgrade van 4.7 naar 4.8" #: plugins/VersionUpgrade/VersionUpgrade48to49/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.8 to Cura 4.9." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.7 naar Cura 4.9." #: plugins/VersionUpgrade/VersionUpgrade48to49/plugin.json msgctxt "name" msgid "Version Upgrade 4.8 to 4.9" msgstr "Versie-upgrade van 4.8 naar 4.9" #: plugins/VersionUpgrade/VersionUpgrade49to410/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.9 to Cura 4.10." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.9 naar Cura 4.10." #: plugins/VersionUpgrade/VersionUpgrade49to410/plugin.json msgctxt "name" msgid "Version Upgrade 4.9 to 4.10" msgstr "Versie-upgrade 4.9 naar 4.10" #: plugins/VersionUpgrade/VersionUpgrade52to53/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 5.2 to Cura 5.3." msgstr "Hiermee worden configuraties bijgewerkt van Cura 5.2 naar Cura 5.3." #: plugins/VersionUpgrade/VersionUpgrade52to53/plugin.json msgctxt "name" msgid "Version Upgrade 5.2 to 5.3" msgstr "Versie-upgrade van 5.2 naar 5.3" #: plugins/VersionUpgrade/VersionUpgrade53to54/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 5.3 to Cura 5.4." msgstr "" #: plugins/VersionUpgrade/VersionUpgrade53to54/plugin.json msgctxt "name" msgid "Version Upgrade 5.3 to 5.4" msgstr "" #: plugins/X3DReader/__init__.py:13 msgctxt "@item:inlistbox" msgid "X3D File" msgstr "X3D-bestand" #: plugins/X3DReader/plugin.json msgctxt "description" msgid "Provides support for reading X3D files." msgstr "Deze optie biedt ondersteuning voor het lezen van X3D-bestanden." #: plugins/X3DReader/plugin.json msgctxt "name" msgid "X3D Reader" msgstr "X3D-lezer" #: plugins/XRayView/__init__.py:12 msgctxt "@item:inlistbox" msgid "X-Ray view" msgstr "Röntgenweergave" #: plugins/XRayView/plugin.json msgctxt "description" msgid "Provides the X-Ray view." msgstr "Biedt de röntgenweergave." #: plugins/XRayView/plugin.json msgctxt "name" msgid "X-Ray View" msgstr "Röntgenweergave" #: plugins/XmlMaterialProfile/plugin.json msgctxt "name" msgid "Material Profiles" msgstr "Materiaalprofielen" #: plugins/XmlMaterialProfile/plugin.json msgctxt "description" msgid "Provides capabilities to read and write XML-based material profiles." msgstr "Biedt mogelijkheden om materiaalprofielen op XML-basis te lezen en te schrijven." #: resources/qml/Account/AccountWidget.qml:24 msgctxt "@action:button" msgid "Sign in" msgstr "Aanmelden" #: resources/qml/Account/GeneralOperations.qml:19 #: resources/qml/WelcomePages/CloudContent.qml:64 msgctxt "@label" msgid "Sign in to the UltiMaker platform" msgstr "Meld u aan op het UltiMaker-platform" #: resources/qml/Account/GeneralOperations.qml:39 msgctxt "@text" msgid "" "- Add material profiles and plug-ins from the Marketplace\n" "- Back-up and sync your material profiles and plug-ins\n" "- Share ideas and get help from 48,000+ users in the UltiMaker community" msgstr "" "- Voeg materiaalprofielen en plug-ins toe uit de Marktplaats\n" "- Maak back-ups van uw materiaalprofielen en plug-ins en synchroniseer deze\n" "- Deel ideeën met 48.000+ gebruikers in de Ultimaker-community of vraag hen om ondersteuning" #: resources/qml/Account/GeneralOperations.qml:58 msgctxt "@button" msgid "Create a free UltiMaker account" msgstr "Maak een gratis UltiMaker-account aan" #: resources/qml/Account/SyncState.qml:35 msgctxt "@label" msgid "Checking..." msgstr "Aan het controleren..." #: resources/qml/Account/SyncState.qml:42 msgctxt "@label" msgid "Account synced" msgstr "Account gesynchroniseerd" #: resources/qml/Account/SyncState.qml:49 msgctxt "@label" msgid "Something went wrong..." msgstr "Er is een fout opgetreden..." #: resources/qml/Account/SyncState.qml:102 msgctxt "@button" msgid "Install pending updates" msgstr "Updates in afwachting installeren" #: resources/qml/Account/SyncState.qml:123 msgctxt "@button" msgid "Check for account updates" msgstr "Controleren op accountupdates" #: resources/qml/Account/UserOperations.qml:78 msgctxt "@label The argument is a timestamp" msgid "Last update: %1" msgstr "Laatste update: %1" #: resources/qml/Account/UserOperations.qml:107 msgctxt "@button" msgid "UltiMaker Account" msgstr "UltiMaker-account" #: resources/qml/Account/UserOperations.qml:126 msgctxt "@button" msgid "Sign Out" msgstr "Afmelden" #: resources/qml/ActionPanel/OutputProcessWidget.qml:59 msgctxt "@label" msgid "No time estimation available" msgstr "Geen tijdschatting beschikbaar" #: resources/qml/ActionPanel/OutputProcessWidget.qml:77 msgctxt "@label" msgid "No cost estimation available" msgstr "Geen kostenraming beschikbaar" #: resources/qml/ActionPanel/OutputProcessWidget.qml:127 msgctxt "@button" msgid "Preview" msgstr "Voorbeeld" #: resources/qml/ActionPanel/PrintJobInformation.qml:31 msgctxt "@label" msgid "Time estimation" msgstr "Tijdschatting" #: resources/qml/ActionPanel/PrintJobInformation.qml:107 msgctxt "@label" msgid "Material estimation" msgstr "Materiaalschatting" #: resources/qml/ActionPanel/PrintJobInformation.qml:156 msgctxt "@label m for meter" msgid "%1m" msgstr "%1m" #: resources/qml/ActionPanel/PrintJobInformation.qml:157 msgctxt "@label g for grams" msgid "%1g" msgstr "%1g" #: resources/qml/ActionPanel/SliceProcessWidget.qml:54 msgctxt "@label:PrintjobStatus" msgid "Slicing..." msgstr "Slicen..." #: resources/qml/ActionPanel/SliceProcessWidget.qml:78 msgctxt "@label:PrintjobStatus" msgid "Unable to slice" msgstr "Kan niet slicen" #: resources/qml/ActionPanel/SliceProcessWidget.qml:114 msgctxt "@button" msgid "Processing" msgstr "Verwerken" #: resources/qml/ActionPanel/SliceProcessWidget.qml:114 msgctxt "@button" msgid "Slice" msgstr "Slicen" #: resources/qml/ActionPanel/SliceProcessWidget.qml:115 msgctxt "@label" msgid "Start the slicing process" msgstr "Het sliceproces starten" #: resources/qml/ActionPanel/SliceProcessWidget.qml:132 msgctxt "@button" msgid "Cancel" msgstr "Annuleren" #: resources/qml/Actions.qml:81 msgctxt "@action:inmenu" msgid "Show Online Troubleshooting" msgstr "Online probleemoplossing weergeven" #: resources/qml/Actions.qml:88 msgctxt "@action:inmenu" msgid "Toggle Full Screen" msgstr "Volledig Scherm In-/Uitschakelen" #: resources/qml/Actions.qml:96 msgctxt "@action:inmenu" msgid "Exit Full Screen" msgstr "Volledig scherm sluiten" #: resources/qml/Actions.qml:103 msgctxt "@action:inmenu menubar:edit" msgid "&Undo" msgstr "Ongedaan &Maken" #: resources/qml/Actions.qml:113 msgctxt "@action:inmenu menubar:edit" msgid "&Redo" msgstr "&Opnieuw" #: resources/qml/Actions.qml:131 msgctxt "@action:inmenu menubar:file" msgid "&Quit" msgstr "&Afsluiten" #: resources/qml/Actions.qml:139 msgctxt "@action:inmenu menubar:view" msgid "3D View" msgstr "3D-weergave" #: resources/qml/Actions.qml:146 msgctxt "@action:inmenu menubar:view" msgid "Front View" msgstr "Weergave voorzijde" #: resources/qml/Actions.qml:153 msgctxt "@action:inmenu menubar:view" msgid "Top View" msgstr "Weergave bovenzijde" #: resources/qml/Actions.qml:160 msgctxt "@action:inmenu menubar:view" msgid "Bottom View" msgstr "Aanzicht onderzijde" #: resources/qml/Actions.qml:167 msgctxt "@action:inmenu menubar:view" msgid "Left Side View" msgstr "Weergave linkerzijde" #: resources/qml/Actions.qml:174 msgctxt "@action:inmenu menubar:view" msgid "Right Side View" msgstr "Weergave rechterzijde" #: resources/qml/Actions.qml:188 msgctxt "@action:inmenu" msgid "Configure Cura..." msgstr "Cura Configureren..." #: resources/qml/Actions.qml:197 msgctxt "@action:inmenu menubar:printer" msgid "&Add Printer..." msgstr "&Printer Toevoegen..." #: resources/qml/Actions.qml:203 msgctxt "@action:inmenu menubar:printer" msgid "Manage Pr&inters..." msgstr "Pr&inters Beheren..." #: resources/qml/Actions.qml:210 msgctxt "@action:inmenu" msgid "Manage Materials..." msgstr "Materialen Beheren..." #: resources/qml/Actions.qml:218 msgctxt "@action:inmenu Marketplace is a brand name of UltiMaker's, so don't translate." msgid "Add more materials from Marketplace" msgstr "Meer materialen toevoegen van Marketplace" #: resources/qml/Actions.qml:225 msgctxt "@action:inmenu menubar:profile" msgid "&Update profile with current settings/overrides" msgstr "Profiel bijwerken met h&uidige instellingen/overschrijvingen" #: resources/qml/Actions.qml:233 msgctxt "@action:inmenu menubar:profile" msgid "&Discard current changes" msgstr "Hui&dige wijzigingen verwijderen" #: resources/qml/Actions.qml:245 msgctxt "@action:inmenu menubar:profile" msgid "&Create profile from current settings/overrides..." msgstr "Profiel maken op basis van huidige instellingen/overs&chrijvingen..." #: resources/qml/Actions.qml:251 msgctxt "@action:inmenu menubar:profile" msgid "Manage Profiles..." msgstr "Profielen Beheren..." #: resources/qml/Actions.qml:259 msgctxt "@action:inmenu menubar:help" msgid "Show Online &Documentation" msgstr "Online &Documentatie Weergeven" #: resources/qml/Actions.qml:267 msgctxt "@action:inmenu menubar:help" msgid "Report a &Bug" msgstr "Een &Bug Rapporteren" #: resources/qml/Actions.qml:275 msgctxt "@action:inmenu menubar:help" msgid "What's New" msgstr "Nieuwe functies" #: resources/qml/Actions.qml:289 msgctxt "@action:inmenu menubar:help" msgid "About..." msgstr "Over..." #: resources/qml/Actions.qml:296 msgctxt "@action:inmenu menubar:edit" msgid "Delete Selected" msgstr "Verwijder geselecteerde items" #: resources/qml/Actions.qml:306 msgctxt "@action:inmenu menubar:edit" msgid "Center Selected" msgstr "Centreer geselecteerde items" #: resources/qml/Actions.qml:315 msgctxt "@action:inmenu menubar:edit" msgid "Multiply Selected" msgstr "Verveelvoudig geselecteerde items" #: resources/qml/Actions.qml:324 msgctxt "@action:inmenu" msgid "Delete Model" msgstr "Model Verwijderen" #: resources/qml/Actions.qml:332 msgctxt "@action:inmenu" msgid "Ce&nter Model on Platform" msgstr "Model op Platform Ce&ntreren" #: resources/qml/Actions.qml:338 msgctxt "@action:inmenu menubar:edit" msgid "&Group Models" msgstr "Modellen &Groeperen" #: resources/qml/Actions.qml:358 msgctxt "@action:inmenu menubar:edit" msgid "Ungroup Models" msgstr "Groeperen van Modellen Opheffen" #: resources/qml/Actions.qml:368 msgctxt "@action:inmenu menubar:edit" msgid "&Merge Models" msgstr "Modellen Samen&voegen" #: resources/qml/Actions.qml:378 msgctxt "@action:inmenu" msgid "&Multiply Model..." msgstr "&Model verveelvoudigen..." #: resources/qml/Actions.qml:385 msgctxt "@action:inmenu menubar:edit" msgid "Select All Models" msgstr "Alle Modellen Selecteren" #: resources/qml/Actions.qml:395 msgctxt "@action:inmenu menubar:edit" msgid "Clear Build Plate" msgstr "Platform Leegmaken" #: resources/qml/Actions.qml:405 msgctxt "@action:inmenu menubar:file" msgid "Reload All Models" msgstr "Alle Modellen Opnieuw Laden" #: resources/qml/Actions.qml:414 msgctxt "@action:inmenu menubar:edit" msgid "Arrange All Models" msgstr "Alle modellen schikken" #: resources/qml/Actions.qml:422 msgctxt "@action:inmenu menubar:edit" msgid "Arrange Selection" msgstr "Selectie schikken" #: resources/qml/Actions.qml:429 msgctxt "@action:inmenu menubar:edit" msgid "Reset All Model Positions" msgstr "Alle Modelposities Herstellen" #: resources/qml/Actions.qml:436 msgctxt "@action:inmenu menubar:edit" msgid "Reset All Model Transformations" msgstr "Alle Modeltransformaties Herstellen" #: resources/qml/Actions.qml:445 msgctxt "@action:inmenu menubar:file" msgid "&Open File(s)..." msgstr "Bestand(en) &openen..." #: resources/qml/Actions.qml:455 msgctxt "@action:inmenu menubar:file" msgid "&New Project..." msgstr "&Nieuw project..." #: resources/qml/Actions.qml:462 msgctxt "@action:inmenu menubar:help" msgid "Show Configuration Folder" msgstr "Open Configuratiemap" #: resources/qml/Actions.qml:469 resources/qml/Settings/SettingView.qml:476 msgctxt "@action:menu" msgid "Configure setting visibility..." msgstr "Zichtbaarheid Instelling Configureren..." #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32 msgctxt "@label:button" msgid "My printers" msgstr "Mijn printers" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34 msgctxt "@tooltip:button" msgid "Monitor printers in Ultimaker Digital Factory." msgstr "Volg uw printers in Ultimaker Digital Factory." #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41 msgctxt "@tooltip:button" msgid "Create print projects in Digital Library." msgstr "Maak printprojecten aan in Digital Library." #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46 msgctxt "@label:button" msgid "Print jobs" msgstr "Printtaken" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48 msgctxt "@tooltip:button" msgid "Monitor print jobs and reprint from your print history." msgstr "Volg printtaken en print opnieuw vanuit uw printgeschiedenis." #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55 msgctxt "@tooltip:button" msgid "Extend UltiMaker Cura with plugins and material profiles." msgstr "Breid UltiMaker Cura uit met plug-ins en materiaalprofielen." #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62 msgctxt "@tooltip:button" msgid "Become a 3D printing expert with UltiMaker e-learning." msgstr "Word een 3D-printexpert met UltiMaker e-learning." #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67 msgctxt "@label:button" msgid "UltiMaker support" msgstr "Ondersteuning van UltiMaker" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69 msgctxt "@tooltip:button" msgid "Learn how to get started with UltiMaker Cura." msgstr "Leer hoe u aan de slag gaat met UltiMaker Cura." #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74 msgctxt "@label:button" msgid "Ask a question" msgstr "Stel een vraag" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76 msgctxt "@tooltip:button" msgid "Consult the UltiMaker Community." msgstr "Consulteer de UltiMaker Community." #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81 msgctxt "@label:button" msgid "Report a bug" msgstr "Een fout melden" #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83 msgctxt "@tooltip:button" msgid "Let developers know that something is going wrong." msgstr "Laat ontwikkelaars weten dat er iets misgaat." #: resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90 msgctxt "@tooltip:button" msgid "Visit the UltiMaker website." msgstr "Bezoek de UltiMaker-website." #: resources/qml/ColorDialog.qml:110 msgctxt "@label" msgid "Hex" msgstr "Inbus" #: resources/qml/Cura.qml:256 msgctxt "@label" msgid "This package will be installed after restarting." msgstr "Dit package wordt na opnieuw starten geïnstalleerd." #: resources/qml/Cura.qml:467 resources/qml/Preferences/GeneralPage.qml:14 msgctxt "@title:tab" msgid "General" msgstr "Algemeen" #: resources/qml/Cura.qml:470 msgctxt "@title:tab" msgid "Settings" msgstr "Instellingen" #: resources/qml/Cura.qml:472 resources/qml/Preferences/MachinesPage.qml:17 msgctxt "@title:tab" msgid "Printers" msgstr "Printers" #: resources/qml/Cura.qml:474 #: resources/qml/Preferences/Materials/MaterialsPage.qml:70 msgctxt "@title:tab" msgid "Materials" msgstr "Materialen" #: resources/qml/Cura.qml:476 resources/qml/Preferences/ProfilesPage.qml:57 msgctxt "@title:tab" msgid "Profiles" msgstr "Profielen" #: resources/qml/Cura.qml:581 msgctxt "@title:window %1 is the application name" msgid "Closing %1" msgstr "%1 wordt gesloten" #: resources/qml/Cura.qml:582 resources/qml/Cura.qml:591 msgctxt "@label %1 is the application name" msgid "Are you sure you want to exit %1?" msgstr "Weet u zeker dat u %1 wilt afsluiten?" #: resources/qml/Cura.qml:629 #: resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16 msgctxt "@title:window" msgid "Open file(s)" msgstr "Bestand(en) openen" #: resources/qml/Cura.qml:734 msgctxt "@window:title" msgid "Install Package" msgstr "Package installeren" #: resources/qml/Cura.qml:741 msgctxt "@title:window" msgid "Open File(s)" msgstr "Bestand(en) openen" #: resources/qml/Cura.qml:743 msgctxt "@text:window" msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one." msgstr "Binnen de door u geselecteerde bestanden zijn een of meer G-code-bestanden aangetroffen. U kunt maximaal één G-code-bestand tegelijk openen. Selecteer maximaal één bestand als u dit wilt openen als G-code-bestand." #: resources/qml/Cura.qml:828 msgctxt "@title:window" msgid "Add Printer" msgstr "Printer Toevoegen" #: resources/qml/Cura.qml:836 msgctxt "@title:window" msgid "What's New" msgstr "Nieuwe functies" #: resources/qml/Cura.qml:890 msgctxt "@title:window" msgid "Save Custom Profile" msgstr "Bewaar aangepast profiel" #: resources/qml/Cura.qml:891 msgctxt "@textfield:placeholder" msgid "New Custom Profile" msgstr "Nieuw Aangepast Profiel" #: resources/qml/Cura.qml:892 msgctxt "@info" msgid "Custom profile name:" msgstr "Naam van nieuw profiel:" #: resources/qml/Cura.qml:909 msgctxt "@label %i will be replaced with a profile name" msgid "Only user changed settings will be saved in the custom profile.
    For materials that support it, the new custom profile will inherit properties from %1." msgstr "Alleen door de gebruiker gewijzigde instellingen worden opgeslagen in het aangepast profiel.
    Voor materialen die dit ondersteunen, neemt het nieuwe aangepaste profiel eigenschappen over van %1 ." #: resources/qml/Cura.qml:917 msgctxt "@action:button" msgid "Learn more about Cura print profiles" msgstr "Meer informatie over Cura-printprofielen" #: resources/qml/Cura.qml:926 msgctxt "@button" msgid "Save new profile" msgstr "Bewaar nieuw profiel" #: resources/qml/Dialogs/AboutDialog.qml:15 msgctxt "@title:window The argument is the application name." msgid "About %1" msgstr "Ongeveer %1" #: resources/qml/Dialogs/AboutDialog.qml:59 msgctxt "@label" msgid "version: %1" msgstr "versie: %1" #: resources/qml/Dialogs/AboutDialog.qml:74 msgctxt "@label" msgid "End-to-end solution for fused filament 3D printing." msgstr "End-to-end-oplossing voor fused filament 3D-printen." #: resources/qml/Dialogs/AboutDialog.qml:87 msgctxt "@info:credit" msgid "" "Cura is developed by UltiMaker in cooperation with the community.\n" "Cura proudly uses the following open source projects:" msgstr "" "Cura is ontwikkeld door UltiMaker in samenwerking met de community.\n" "Cura maakt met trots gebruik van de volgende opensourceprojecten:" #: resources/qml/Dialogs/AboutDialog.qml:138 msgctxt "@label Description for application component" msgid "Graphical user interface" msgstr "Grafische gebruikersinterface (GUI)" #: resources/qml/Dialogs/AboutDialog.qml:139 msgctxt "@label Description for application component" msgid "Application framework" msgstr "Toepassingskader" #: resources/qml/Dialogs/AboutDialog.qml:140 msgctxt "@label Description for application component" msgid "G-code generator" msgstr "G-code-generator" #: resources/qml/Dialogs/AboutDialog.qml:141 msgctxt "@label Description for application component" msgid "Interprocess communication library" msgstr "InterProcess Communication-bibliotheek" #: resources/qml/Dialogs/AboutDialog.qml:142 msgctxt "@label Description for application component" msgid "Python bindings for libnest2d" msgstr "Pythonbindingen voor libnest2d" #: resources/qml/Dialogs/AboutDialog.qml:143 msgctxt "@label Description for application component" msgid "Polygon packing library, developed by Prusa Research" msgstr "Verpakkingsbibliotheek met veelhoeken, ontwikkeld door Prusa Research" #: resources/qml/Dialogs/AboutDialog.qml:144 msgctxt "@label Description for application component" msgid "Support library for handling 3MF files" msgstr "Ondersteuningsbibliotheek voor het verwerken van 3MF-bestanden" #: resources/qml/Dialogs/AboutDialog.qml:145 msgctxt "@label Description for application component" msgid "Support library for file metadata and streaming" msgstr "Ondersteuningsbibliotheek voor bestandsmetadata en streaming" #: resources/qml/Dialogs/AboutDialog.qml:148 msgctxt "@label Description for application dependency" msgid "Programming language" msgstr "Programmeertaal" #: resources/qml/Dialogs/AboutDialog.qml:149 msgctxt "@label Description for application dependency" msgid "GUI framework" msgstr "GUI-kader" #: resources/qml/Dialogs/AboutDialog.qml:150 msgctxt "@label Description for application dependency" msgid "GUI framework bindings" msgstr "Bindingen met GUI-kader" #: resources/qml/Dialogs/AboutDialog.qml:151 msgctxt "@label Description for application dependency" msgid "C/C++ Binding library" msgstr "Bindingenbibliotheek C/C++" #: resources/qml/Dialogs/AboutDialog.qml:152 msgctxt "@label Description for application dependency" msgid "Data interchange format" msgstr "Indeling voor gegevensuitwisseling" #: resources/qml/Dialogs/AboutDialog.qml:153 msgctxt "@label" msgid "Font" msgstr "Lettertype" #: resources/qml/Dialogs/AboutDialog.qml:156 msgctxt "@label Description for application dependency" msgid "Polygon clipping library" msgstr "Bibliotheek met veelhoeken" #: resources/qml/Dialogs/AboutDialog.qml:157 msgctxt "@label Description for application dependency" msgid "JSON parser" msgstr "JSON-parser" #: resources/qml/Dialogs/AboutDialog.qml:158 msgctxt "@label Description for application dependency" msgid "Utility functions, including an image loader" msgstr "Gebruiksfuncties, waaronder een afbeeldinglader" #: resources/qml/Dialogs/AboutDialog.qml:159 msgctxt "@label Description for application dependency" msgid "Utility library, including Voronoi generation" msgstr "Gebruiksbibliotheek, waaronder Voronoi-generatie" #: resources/qml/Dialogs/AboutDialog.qml:162 #: resources/qml/Dialogs/AboutDialog.qml:163 msgctxt "@label Description for application dependency" msgid "Root Certificates for validating SSL trustworthiness" msgstr "Rootcertificaten voor het valideren van SSL-betrouwbaarheid" #: resources/qml/Dialogs/AboutDialog.qml:164 msgctxt "@label Description for application dependency" msgid "Compatibility between Python 2 and 3" msgstr "Compatibiliteit tussen Python 2 en 3" #: resources/qml/Dialogs/AboutDialog.qml:165 msgctxt "@label Description for application dependency" msgid "Support library for system keyring access" msgstr "Ondersteuningsbibliotheek voor toegang tot systeemkeyring" #: resources/qml/Dialogs/AboutDialog.qml:166 msgctxt "@label Description for application dependency" msgid "Support library for faster math" msgstr "Ondersteuningsbibliotheek voor snellere berekeningen" #: resources/qml/Dialogs/AboutDialog.qml:167 msgctxt "@label Description for application dependency" msgid "Support library for handling STL files" msgstr "Ondersteuningsbibliotheek voor het verwerken van STL-bestanden" #: resources/qml/Dialogs/AboutDialog.qml:168 msgctxt "@label Description for application dependency" msgid "Python bindings for Clipper" msgstr "Pythonbindingen voor Clipper" #: resources/qml/Dialogs/AboutDialog.qml:169 msgctxt "@label Description for application dependency" msgid "Serial communication library" msgstr "Seriële-communicatiebibliotheek" #: resources/qml/Dialogs/AboutDialog.qml:170 msgctxt "@label Description for application dependency" msgid "Support library for scientific computing" msgstr "Ondersteuningsbibliotheek voor wetenschappelijke berekeningen" #: resources/qml/Dialogs/AboutDialog.qml:171 msgctxt "@Label Description for application dependency" msgid "Python Error tracking library" msgstr "Python fouttraceringsbibliotheek" #: resources/qml/Dialogs/AboutDialog.qml:172 msgctxt "@label Description for application dependency" msgid "Support library for handling triangular meshes" msgstr "Ondersteuningsbibliotheek voor het verwerken van driehoekig rasters" #: resources/qml/Dialogs/AboutDialog.qml:173 msgctxt "@label Description for application dependency" msgid "ZeroConf discovery library" msgstr "ZeroConf-detectiebibliotheek" #: resources/qml/Dialogs/AboutDialog.qml:176 msgctxt "@label Description for development tool" msgid "Universal build system configuration" msgstr "Universele configuratie bouwsysteem" #: resources/qml/Dialogs/AboutDialog.qml:177 msgctxt "@label Description for development tool" msgid "Dependency and package manager" msgstr "Afhankelijkheden- en pakketbeheer" #: resources/qml/Dialogs/AboutDialog.qml:178 msgctxt "@label Description for development tool" msgid "Packaging Python-applications" msgstr "Verpakking Python-toepassingen" #: resources/qml/Dialogs/AboutDialog.qml:179 msgctxt "@label Description for development tool" msgid "Linux cross-distribution application deployment" msgstr "Implementatie van Linux-toepassing voor kruisdistributie" #: resources/qml/Dialogs/AboutDialog.qml:180 msgctxt "@label Description for development tool" msgid "Generating Windows installers" msgstr "Windows-installatieprogramma's genereren" #: resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17 msgctxt "@title:window" msgid "Open project file" msgstr "Projectbestand openen" #: resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:84 msgctxt "@text:window" msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?" msgstr "Dit is een Cura-projectbestand. Wilt u dit openen als project of de modellen eruit importeren?" #: resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91 msgctxt "@text:window" msgid "Remember my choice" msgstr "Mijn keuze onthouden" #: resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105 msgctxt "@action:button" msgid "Open as project" msgstr "Openen als project" #: resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110 msgctxt "@action:button" msgid "Import models" msgstr "Modellen importeren" #: resources/qml/Dialogs/ChoosePrinterDialog.qml:17 msgctxt "@title:window" msgid "Select Printer" msgstr "Printer selecteren" #: resources/qml/Dialogs/ChoosePrinterDialog.qml:54 msgctxt "@title:label" msgid "Compatible Printers" msgstr "Compatibele printers" #: resources/qml/Dialogs/ChoosePrinterDialog.qml:110 msgctxt "@description" msgid "No compatible printers, that are currently online, were found." msgstr "Geen compatibele printers, die momenteel online zijn, indien gevonden." #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:13 msgctxt "@title:window" msgid "Discard or Keep changes" msgstr "Wijzigingen verwijderen of behouden" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:64 msgctxt "@text:window, %1 is a profile name" msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'." msgstr "" "U hebt enkele profielinstellingen aangepast.\n" "Wilt u deze gewijzigde instellingen behouden na het verwisselen van profielen?\n" "U kunt de wijzigingen ook verwijderen om de standaardinstellingen van '%1' te laden." #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:90 msgctxt "@title:column" msgid "Profile settings" msgstr "Profielinstellingen" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:92 msgctxt "@title:column" msgid "Current changes" msgstr "Huidige wijzigingen" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:123 #: resources/qml/Preferences/GeneralPage.qml:820 msgctxt "@option:discardOrKeep" msgid "Always ask me this" msgstr "Altijd vragen" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:124 msgctxt "@option:discardOrKeep" msgid "Discard and never ask again" msgstr "Verwijderen en nooit meer vragen" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125 msgctxt "@option:discardOrKeep" msgid "Keep and never ask again" msgstr "Behouden en nooit meer vragen" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:157 msgctxt "@action:button" msgid "Discard changes" msgstr "Wijzigingen verwijderen" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:164 msgctxt "@action:button" msgid "Keep changes" msgstr "Wijzigingen behouden" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:171 msgctxt "@action:button" msgid "Save as new custom profile" msgstr "Behoud wijzigingen in een nieuw profiel" #: resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:178 msgctxt "@action:button" msgid "Save changes" msgstr "Wijzigingen behouden" #: resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47 msgctxt "@text:window" msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?" msgstr "Binnen de door u geselecteerde bestanden zijn een of meer projectbestanden aangetroffen. U kunt slechts één projectbestand tegelijk openen. Het wordt aangeraden alleen modellen uit deze bestanden te importeren. Wilt u verdergaan?" #: resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64 msgctxt "@action:button" msgid "Import all as models" msgstr "Allemaal als model importeren" #: resources/qml/Dialogs/RenameDialog.qml:23 msgctxt "@title:window" msgid "Rename" msgstr "Hernoemen" #: resources/qml/Dialogs/RenameDialog.qml:24 msgctxt "@info" msgid "Please provide a new name." msgstr "Geef een nieuwe naam op." #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14 msgctxt "@title:window" msgid "Save Project" msgstr "Project opslaan" #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:177 msgctxt "@action:label" msgid "Extruder %1" msgstr "Extruder %1" #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193 msgctxt "@action:label" msgid "%1 & material" msgstr "%1 &materiaal" #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:195 msgctxt "@action:label" msgid "Material" msgstr "Materiaal" #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284 msgctxt "@action:label" msgid "Don't show project summary on save again" msgstr "Bij opnieuw opslaan projectsamenvatting niet weergeven" #: resources/qml/Dialogs/WorkspaceSummaryDialog.qml:298 msgctxt "@action:button" msgid "Save" msgstr "Opslaan" #: resources/qml/JobSpecs.qml:93 msgctxt "@text Print job name" msgid "Untitled" msgstr "Zonder titel" #: resources/qml/MainWindow/ApplicationMenu.qml:63 #: resources/qml/Menus/SettingsMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&Settings" msgstr "In&stellingen" #: resources/qml/MainWindow/ApplicationMenu.qml:87 msgctxt "@title:window" msgid "New project" msgstr "Nieuw project" #: resources/qml/MainWindow/ApplicationMenu.qml:88 msgctxt "@info:question" msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings." msgstr "Weet u zeker dat u een nieuw project wilt starten? Hiermee wordt het platform leeggemaakt en worden eventuele niet-opgeslagen instellingen verwijderd." #: resources/qml/MainWindow/MainWindowHeader.qml:135 msgctxt "@action:button" msgid "Marketplace" msgstr "Marktplaats" #: resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18 msgctxt "@header" msgid "Configurations" msgstr "Configuraties" #: resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137 msgctxt "@label" msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile." msgstr "Deze configuratie is niet beschikbaar omdat %1 niet wordt herkend. Ga naar %2 om het juiste materiaalprofiel te downloaden." #: resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138 msgctxt "@label" msgid "Marketplace" msgstr "Marktplaats" #: resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52 msgctxt "@label" msgid "Loading available configurations from the printer..." msgstr "Beschikbare configuraties laden vanaf de printer..." #: resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53 msgctxt "@label" msgid "The configurations are not available because the printer is disconnected." msgstr "De configuraties zijn niet beschikbaar omdat de printer niet verbonden is." #: resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106 msgctxt "@tooltip" msgid "The configuration of this extruder is not allowed, and prohibits slicing." msgstr "De configuratie van deze extruder is niet toegestaan en verhindert slicen." #: resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:110 msgctxt "@tooltip" msgid "There are no profiles matching the configuration of this extruder." msgstr "Er zijn geen profielen die compatibel zijn met de configuratie van deze extruder." #: resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:250 msgctxt "@label" msgid "Select configuration" msgstr "Configuratie selecteren" #: resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:358 msgctxt "@label" msgid "Configurations" msgstr "Configuraties" #: resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27 msgctxt "@header" msgid "Custom" msgstr "Aangepast" #: resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:173 msgctxt "@label" msgid "Enabled" msgstr "Ingeschakeld" #: resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:222 msgctxt "@label" msgid "Material" msgstr "Materiaal" #: resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:348 msgctxt "@label" msgid "Use glue for better adhesion with this material combination." msgstr "Gebruik lijm bij deze combinatie van materialen voor een betere hechting." #: resources/qml/Menus/ContextMenu.qml:29 msgctxt "@label" msgid "Print Selected Model With:" msgid_plural "Print Selected Models With:" msgstr[0] "Geselecteerd model printen met:" msgstr[1] "Geselecteerde modellen printen met:" #: resources/qml/Menus/ContextMenu.qml:92 msgctxt "@title:window" msgid "Multiply Selected Model" msgid_plural "Multiply Selected Models" msgstr[0] "Geselecteerd model verveelvoudigen" msgstr[1] "Geselecteerde modellen verveelvoudigen" #: resources/qml/Menus/ContextMenu.qml:123 msgctxt "@label" msgid "Number of Copies" msgstr "Aantal exemplaren" #: resources/qml/Menus/EditMenu.qml:12 msgctxt "@title:menu menubar:toplevel" msgid "&Edit" msgstr "B&ewerken" #: resources/qml/Menus/ExtensionMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "E&xtensions" msgstr "E&xtensies" #: resources/qml/Menus/FileMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&File" msgstr "&Bestand" #: resources/qml/Menus/FileMenu.qml:45 msgctxt "@title:menu menubar:file" msgid "&Save Project..." msgstr "&Project opslaan..." #: resources/qml/Menus/FileMenu.qml:78 msgctxt "@title:menu menubar:file" msgid "&Export..." msgstr "&Exporteren..." #: resources/qml/Menus/FileMenu.qml:89 msgctxt "@action:inmenu menubar:file" msgid "Export Selection..." msgstr "Selectie Exporteren..." #: resources/qml/Menus/HelpMenu.qml:14 msgctxt "@title:menu menubar:toplevel" msgid "&Help" msgstr "&Help" #: resources/qml/Menus/MaterialMenu.qml:13 msgctxt "@label:category menu label" msgid "Material" msgstr "Materiaal" #: resources/qml/Menus/MaterialMenu.qml:53 msgctxt "@label:category menu label" msgid "Favorites" msgstr "Favorieten" #: resources/qml/Menus/MaterialMenu.qml:78 msgctxt "@label:category menu label" msgid "Generic" msgstr "Standaard" #: resources/qml/Menus/OpenFilesMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Open File(s)..." msgstr "Bestand(en) openen..." #: resources/qml/Menus/PreferencesMenu.qml:21 msgctxt "@title:menu menubar:toplevel" msgid "P&references" msgstr "Voo&rkeuren" #: resources/qml/Menus/PrinterMenu.qml:13 msgctxt "@title:menu menubar:settings" msgid "&Printer" msgstr "&Printer" #: resources/qml/Menus/PrinterMenu.qml:17 msgctxt "@label:category menu label" msgid "Network enabled printers" msgstr "Netwerkprinters" #: resources/qml/Menus/PrinterMenu.qml:50 msgctxt "@label:category menu label" msgid "Local printers" msgstr "Lokale printers" #: resources/qml/Menus/RecentFilesMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Open &Recent" msgstr "&Recente bestanden openen" #: resources/qml/Menus/SaveProjectMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Save Project..." msgstr "Project opslaan..." #: resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16 msgctxt "@action:inmenu" msgid "Visible Settings" msgstr "Zichtbare instellingen" #: resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42 msgctxt "@action:inmenu" msgid "Collapse All Categories" msgstr "Alle categorieën samenvouwen" #: resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51 msgctxt "@action:inmenu" msgid "Manage Setting Visibility..." msgstr "Instelling voor zichtbaarheid beheren..." #: resources/qml/Menus/SettingsMenu.qml:34 msgctxt "@title:menu" msgid "&Material" msgstr "&Materiaal" #: resources/qml/Menus/SettingsMenu.qml:49 msgctxt "@action:inmenu" msgid "Set as Active Extruder" msgstr "Instellen als Actieve Extruder" #: resources/qml/Menus/SettingsMenu.qml:55 msgctxt "@action:inmenu" msgid "Enable Extruder" msgstr "Extruder inschakelen" #: resources/qml/Menus/SettingsMenu.qml:63 msgctxt "@action:inmenu" msgid "Disable Extruder" msgstr "Extruder uitschakelen" #: resources/qml/Menus/ViewMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&View" msgstr "Beel&d" #: resources/qml/Menus/ViewMenu.qml:17 msgctxt "@action:inmenu menubar:view" msgid "&Camera position" msgstr "&Camerapositie" #: resources/qml/Menus/ViewMenu.qml:30 msgctxt "@action:inmenu menubar:view" msgid "Camera view" msgstr "Camerabeeld" #: resources/qml/Menus/ViewMenu.qml:48 msgctxt "@action:inmenu menubar:view" msgid "Perspective" msgstr "Perspectief" #: resources/qml/Menus/ViewMenu.qml:59 msgctxt "@action:inmenu menubar:view" msgid "Orthographic" msgstr "Orthografisch" #: resources/qml/MonitorButton.qml:115 msgctxt "@label:MonitorStatus" msgid "Not connected to a printer" msgstr "Niet met een printer verbonden" #: resources/qml/MonitorButton.qml:119 msgctxt "@label:MonitorStatus" msgid "Printer does not accept commands" msgstr "Printer accepteert geen opdrachten" #: resources/qml/MonitorButton.qml:129 msgctxt "@label:MonitorStatus" msgid "In maintenance. Please check the printer" msgstr "In onderhoud. Controleer de printer" #: resources/qml/MonitorButton.qml:140 msgctxt "@label:MonitorStatus" msgid "Lost connection with the printer" msgstr "Verbinding met de printer is verbroken" #: resources/qml/MonitorButton.qml:142 msgctxt "@label:MonitorStatus" msgid "Printing..." msgstr "Printen..." #: resources/qml/MonitorButton.qml:145 msgctxt "@label:MonitorStatus" msgid "Paused" msgstr "Gepauzeerd" #: resources/qml/MonitorButton.qml:148 msgctxt "@label:MonitorStatus" msgid "Preparing..." msgstr "Voorbereiden..." #: resources/qml/MonitorButton.qml:150 msgctxt "@label:MonitorStatus" msgid "Please remove the print" msgstr "Verwijder de print" #: resources/qml/MonitorButton.qml:318 msgctxt "@label" msgid "Abort Print" msgstr "Printen Afbreken" #: resources/qml/MonitorButton.qml:327 msgctxt "@label" msgid "Are you sure you want to abort the print?" msgstr "Weet u zeker dat u het printen wilt afbreken?" #: resources/qml/ObjectItemButton.qml:109 msgctxt "@label" msgid "Is printed as support." msgstr "Is geprint als support." #: resources/qml/ObjectItemButton.qml:112 msgctxt "@label" msgid "Other models overlapping with this model are modified." msgstr "Andere modellen die met dit model overlappen, zijn gewijzigd." #: resources/qml/ObjectItemButton.qml:115 msgctxt "@label" msgid "Infill overlapping with this model is modified." msgstr "De vulling die met dit model overlapt, is aangepast." #: resources/qml/ObjectItemButton.qml:118 msgctxt "@label" msgid "Overlaps with this model are not supported." msgstr "Overlappingen worden in dit model niet ondersteund." #: resources/qml/ObjectItemButton.qml:125 msgctxt "@label %1 is the number of settings it overrides." msgid "Overrides %1 setting." msgid_plural "Overrides %1 settings." msgstr[0] "Overschrijft %1 instelling." msgstr[1] "Overschrijft %1 instellingen." #: resources/qml/ObjectSelector.qml:59 msgctxt "@label" msgid "Object list" msgstr "Lijst met objecten" #: resources/qml/Preferences/GeneralPage.qml:134 #: resources/qml/Preferences/SettingVisibilityPage.qml:24 msgctxt "@action:button" msgid "Defaults" msgstr "Standaardwaarden" #: resources/qml/Preferences/GeneralPage.qml:172 msgctxt "@label" msgid "Interface" msgstr "Interface" #: resources/qml/Preferences/GeneralPage.qml:215 msgctxt "@heading" msgid "-- incomplete --" msgstr "-- onvolledig --" #: resources/qml/Preferences/GeneralPage.qml:261 msgctxt "@label" msgid "Currency:" msgstr "Valuta:" #: resources/qml/Preferences/GeneralPage.qml:277 msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed." msgid "Theme*:" msgstr "Thema*:" #: resources/qml/Preferences/GeneralPage.qml:323 msgctxt "@info:tooltip" msgid "Slice automatically when changing settings." msgstr "Automatisch slicen bij wijzigen van instellingen." #: resources/qml/Preferences/GeneralPage.qml:331 msgctxt "@option:check" msgid "Slice automatically" msgstr "Automatisch slicen" #: resources/qml/Preferences/GeneralPage.qml:340 msgctxt "@info:tooltip" msgid "Show an icon and notifications in the system notification area." msgstr "Toon een pictogram en meldingen in het systeemvak voor meldingen." #: resources/qml/Preferences/GeneralPage.qml:348 msgctxt "@option:check" msgid "Add icon to system tray *" msgstr "Pictogram toevoegen aan systeemvak *" #: resources/qml/Preferences/GeneralPage.qml:357 msgctxt "@label" msgid "*You will need to restart the application for these changes to have effect." msgstr "*U moet de toepassing opnieuw starten voordat deze wijzigingen van kracht worden." #: resources/qml/Preferences/GeneralPage.qml:373 msgctxt "@label" msgid "Viewport behavior" msgstr "Gedrag kijkvenster" #: resources/qml/Preferences/GeneralPage.qml:381 msgctxt "@info:tooltip" msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly." msgstr "Geef niet-ondersteunde gedeelten van het model een rode markering. Zonder ondersteuning zullen deze gedeelten niet goed worden geprint." #: resources/qml/Preferences/GeneralPage.qml:390 msgctxt "@option:check" msgid "Display overhang" msgstr "Overhang weergeven" #: resources/qml/Preferences/GeneralPage.qml:400 msgctxt "@info:tooltip" msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry." msgstr "Markeer ontbrekende of ongebruikelijke oppervlakken van het model met behulp van waarschuwingstekens. De toolpaths zullen vaak delen van de beoogde geometrie missen." #: resources/qml/Preferences/GeneralPage.qml:409 msgctxt "@option:check" msgid "Display model errors" msgstr "Modelfouten weergeven" #: resources/qml/Preferences/GeneralPage.qml:417 msgctxt "@info:tooltip" msgid "Moves the camera so the model is in the center of the view when a model is selected" msgstr "Verplaatst de camera zodanig dat wanneer een model wordt geselecteerd, het model in het midden van het beeld wordt weergegeven" #: resources/qml/Preferences/GeneralPage.qml:422 msgctxt "@action:button" msgid "Center camera when item is selected" msgstr "Camera centreren wanneer een item wordt geselecteerd" #: resources/qml/Preferences/GeneralPage.qml:432 msgctxt "@info:tooltip" msgid "Should the default zoom behavior of cura be inverted?" msgstr "Moet het standaard zoomgedrag van Cura worden omgekeerd?" #: resources/qml/Preferences/GeneralPage.qml:437 msgctxt "@action:button" msgid "Invert the direction of camera zoom." msgstr "Keer de richting van de camerazoom om." #: resources/qml/Preferences/GeneralPage.qml:453 msgctxt "@info:tooltip" msgid "Should zooming move in the direction of the mouse?" msgstr "Moet het zoomen in de richting van de muis gebeuren?" #: resources/qml/Preferences/GeneralPage.qml:453 msgctxt "@info:tooltip" msgid "Zooming towards the mouse is not supported in the orthographic perspective." msgstr "Zoomen in de richting van de muis wordt niet ondersteund in het orthografische perspectief." #: resources/qml/Preferences/GeneralPage.qml:458 msgctxt "@action:button" msgid "Zoom toward mouse direction" msgstr "Zoomen in de richting van de muis" #: resources/qml/Preferences/GeneralPage.qml:484 msgctxt "@info:tooltip" msgid "Should models on the platform be moved so that they no longer intersect?" msgstr "Moeten modellen op het platform zodanig worden verplaatst dat ze elkaar niet meer doorsnijden?" #: resources/qml/Preferences/GeneralPage.qml:489 msgctxt "@option:check" msgid "Ensure models are kept apart" msgstr "Modellen gescheiden houden" #: resources/qml/Preferences/GeneralPage.qml:498 msgctxt "@info:tooltip" msgid "Should models on the platform be moved down to touch the build plate?" msgstr "Moeten modellen in het printgebied omlaag worden gebracht zodat ze het platform raken?" #: resources/qml/Preferences/GeneralPage.qml:503 msgctxt "@option:check" msgid "Automatically drop models to the build plate" msgstr "Modellen automatisch op het platform laten vallen" #: resources/qml/Preferences/GeneralPage.qml:515 msgctxt "@info:tooltip" msgid "Show caution message in g-code reader." msgstr "Toon het waarschuwingsbericht in de G-code-lezer." #: resources/qml/Preferences/GeneralPage.qml:524 msgctxt "@option:check" msgid "Caution message in g-code reader" msgstr "Waarschuwingsbericht in de G-code-lezer" #: resources/qml/Preferences/GeneralPage.qml:532 msgctxt "@info:tooltip" msgid "Should layer be forced into compatibility mode?" msgstr "Moet de laag in de compatibiliteitsmodus worden geforceerd?" #: resources/qml/Preferences/GeneralPage.qml:537 msgctxt "@option:check" msgid "Force layer view compatibility mode (restart required)" msgstr "Compatibiliteitsmodus voor laagweergave forceren (opnieuw opstarten vereist)" #: resources/qml/Preferences/GeneralPage.qml:547 msgctxt "@info:tooltip" msgid "Should Cura open at the location it was closed?" msgstr "Moet Cura openen op de locatie waar het gesloten werd?" #: resources/qml/Preferences/GeneralPage.qml:552 msgctxt "@option:check" msgid "Restore window position on start" msgstr "Herstel de vensterpositie bij het opstarten" #: resources/qml/Preferences/GeneralPage.qml:562 msgctxt "@info:tooltip" msgid "What type of camera rendering should be used?" msgstr "Welk type cameraweergave moet worden gebruikt?" #: resources/qml/Preferences/GeneralPage.qml:569 msgctxt "@window:text" msgid "Camera rendering:" msgstr "Cameraweergave:" #: resources/qml/Preferences/GeneralPage.qml:576 msgid "Perspective" msgstr "Perspectief" #: resources/qml/Preferences/GeneralPage.qml:577 msgid "Orthographic" msgstr "Orthografisch" #: resources/qml/Preferences/GeneralPage.qml:617 msgctxt "@label" msgid "Opening and saving files" msgstr "Bestanden openen en opslaan" #: resources/qml/Preferences/GeneralPage.qml:624 msgctxt "@info:tooltip" msgid "Should opening files from the desktop or external applications open in the same instance of Cura?" msgstr "Wilt u dat bestanden vanaf de desktop of externe toepassingen in dezelfde instantie van Cura worden geopend?" #: resources/qml/Preferences/GeneralPage.qml:629 msgctxt "@option:check" msgid "Use a single instance of Cura" msgstr "Gebruik één instantie van Cura" #: resources/qml/Preferences/GeneralPage.qml:640 msgctxt "@info:tooltip" msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?" msgstr "Moet het platform worden leeggemaakt voordat u een nieuw model laadt in de dezelfde instantie van Cura?" #: resources/qml/Preferences/GeneralPage.qml:646 msgctxt "@option:check" msgid "Clear buildplate before loading model into the single instance" msgstr "Maak platform leeg voordat u een model laadt in dezelfde instantie" #: resources/qml/Preferences/GeneralPage.qml:656 msgctxt "@info:tooltip" msgid "Should models be scaled to the build volume if they are too large?" msgstr "Moeten modellen worden geschaald naar het werkvolume als ze te groot zijn?" #: resources/qml/Preferences/GeneralPage.qml:661 msgctxt "@option:check" msgid "Scale large models" msgstr "Grote modellen schalen" #: resources/qml/Preferences/GeneralPage.qml:671 msgctxt "@info:tooltip" msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?" msgstr "Een model wordt mogelijk extreem klein weergegeven als de eenheden bijvoorbeeld in meters zijn in plaats van in millimeters. Moeten dergelijke modellen worden opgeschaald?" #: resources/qml/Preferences/GeneralPage.qml:676 msgctxt "@option:check" msgid "Scale extremely small models" msgstr "Extreem kleine modellen schalen" #: resources/qml/Preferences/GeneralPage.qml:686 msgctxt "@info:tooltip" msgid "Should models be selected after they are loaded?" msgstr "Moeten modellen worden geselecteerd nadat ze zijn geladen?" #: resources/qml/Preferences/GeneralPage.qml:691 msgctxt "@option:check" msgid "Select models when loaded" msgstr "Modellen selecteren wanneer ze geladen zijn" #: resources/qml/Preferences/GeneralPage.qml:701 msgctxt "@info:tooltip" msgid "Should a prefix based on the printer name be added to the print job name automatically?" msgstr "Moet er automatisch een op de printernaam gebaseerde voorvoegsel aan de naam van de printtaak worden toegevoegd?" #: resources/qml/Preferences/GeneralPage.qml:706 msgctxt "@option:check" msgid "Add machine prefix to job name" msgstr "Machinevoorvoegsel toevoegen aan taaknaam" #: resources/qml/Preferences/GeneralPage.qml:716 msgctxt "@info:tooltip" msgid "Should a summary be shown when saving a project file?" msgstr "Dient er een samenvatting te worden weergegeven wanneer een projectbestand wordt opgeslagen?" #: resources/qml/Preferences/GeneralPage.qml:720 msgctxt "@option:check" msgid "Show summary dialog when saving project" msgstr "Dialoogvenster voor samenvatting weergeven tijdens het opslaan van een project" #: resources/qml/Preferences/GeneralPage.qml:730 msgctxt "@info:tooltip" msgid "Default behavior when opening a project file" msgstr "Standaardgedrag tijdens het openen van een projectbestand" #: resources/qml/Preferences/GeneralPage.qml:738 msgctxt "@window:text" msgid "Default behavior when opening a project file: " msgstr "Standaardgedrag tijdens het openen van een projectbestand: " #: resources/qml/Preferences/GeneralPage.qml:753 msgctxt "@option:openProject" msgid "Always ask me this" msgstr "Altijd vragen" #: resources/qml/Preferences/GeneralPage.qml:754 msgctxt "@option:openProject" msgid "Always open as a project" msgstr "Altijd als project openen" #: resources/qml/Preferences/GeneralPage.qml:755 msgctxt "@option:openProject" msgid "Always import models" msgstr "Altijd modellen importeren" #: resources/qml/Preferences/GeneralPage.qml:792 msgctxt "@info:tooltip" msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again." msgstr "Wanneer u wijzigingen hebt aangebracht aan een profiel en naar een ander profiel wisselt, wordt een dialoogvenster weergegeven waarin u wordt gevraagd of u de aanpassingen wilt behouden. U kunt ook een standaardgedrag kiezen en het dialoogvenster nooit meer laten weergeven." #: resources/qml/Preferences/GeneralPage.qml:801 #: resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:46 msgctxt "@label" msgid "Profiles" msgstr "Profielen" #: resources/qml/Preferences/GeneralPage.qml:806 msgctxt "@window:text" msgid "Default behavior for changed setting values when switching to a different profile: " msgstr "Standaardgedrag voor gewijzigde instellingen wanneer er naar een ander profiel wordt overgeschakeld: " #: resources/qml/Preferences/GeneralPage.qml:821 msgctxt "@option:discardOrKeep" msgid "Always discard changed settings" msgstr "Gewijzigde instellingen altijd verwijderen" #: resources/qml/Preferences/GeneralPage.qml:822 msgctxt "@option:discardOrKeep" msgid "Always transfer changed settings to new profile" msgstr "Gewijzigde instellingen altijd naar nieuw profiel overbrengen" #: resources/qml/Preferences/GeneralPage.qml:856 msgctxt "@label" msgid "Privacy" msgstr "Privacy" #: resources/qml/Preferences/GeneralPage.qml:862 msgctxt "@info:tooltip" msgid "Should anonymous data about your print be sent to UltiMaker? Note, no models, IP addresses or other personally identifiable information is sent or stored." msgstr "Mogen anonieme gegevens over uw print naar UltiMaker worden verzonden? Opmerking: er worden geen modellen, IP-adressen of andere persoonlijk identificeerbare gegevens verzonden of opgeslagen." #: resources/qml/Preferences/GeneralPage.qml:867 msgctxt "@option:check" msgid "Send (anonymous) print information" msgstr "(Anonieme) printgegevens verzenden" #: resources/qml/Preferences/GeneralPage.qml:897 msgctxt "@label" msgid "Updates" msgstr "Updates" #: resources/qml/Preferences/GeneralPage.qml:904 msgctxt "@info:tooltip" msgid "Should Cura check for updates when the program is started?" msgstr "Moet Cura op updates controleren wanneer het programma wordt gestart?" #: resources/qml/Preferences/GeneralPage.qml:909 msgctxt "@option:check" msgid "Check for updates on start" msgstr "Bij starten op updates controleren" #: resources/qml/Preferences/GeneralPage.qml:925 msgctxt "@info:tooltip" msgid "When checking for updates, only check for stable releases." msgstr "Kijk bij het controleren op updates alleen naar stabiele releases." #: resources/qml/Preferences/GeneralPage.qml:931 msgctxt "@option:radio" msgid "Stable releases only" msgstr "Alleen stabiele releases" #: resources/qml/Preferences/GeneralPage.qml:941 msgctxt "@info:tooltip" msgid "When checking for updates, check for both stable and for beta releases." msgstr "Kijk bij het controleren op updates naar stabiele releases en bèta-releases." #: resources/qml/Preferences/GeneralPage.qml:947 msgctxt "@option:radio" msgid "Stable and Beta releases" msgstr "Stabiele releases en bèta-releases" #: resources/qml/Preferences/GeneralPage.qml:957 msgctxt "@info:tooltip" msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!" msgstr "Moet er elke keer dat Cura wordt opgestart automatisch worden gecontroleerd op nieuwe plug-ins? Wij raden u ten zeerste aan dit niet uit te schakelen!" #: resources/qml/Preferences/GeneralPage.qml:962 msgctxt "@option:check" msgid "Get notifications for plugin updates" msgstr "Meldingen ontvangen als er updates zijn voor pug-ins" #: resources/qml/Preferences/MachinesPage.qml:50 msgctxt "@action:button" msgid "Add New" msgstr "Nieuwe toevoegen" #: resources/qml/Preferences/MachinesPage.qml:147 #: resources/qml/Preferences/Materials/MaterialsPage.qml:160 #: resources/qml/Preferences/ProfilesPage.qml:294 msgctxt "@action:button" msgid "Activate" msgstr "Activeren" #: resources/qml/Preferences/MachinesPage.qml:159 #: resources/qml/Preferences/ProfilesPage.qml:331 msgctxt "@action:button" msgid "Rename" msgstr "Hernoemen" #: resources/qml/Preferences/Materials/MaterialsPage.qml:72 msgctxt "@label" msgid "Materials compatible with active printer:" msgstr "Materialen die compatibel zijn met actieve printer:" #: resources/qml/Preferences/Materials/MaterialsPage.qml:78 #: resources/qml/Preferences/ProfilesPage.qml:94 msgctxt "@action:button" msgid "Create new" msgstr "Nieuw maken" #: resources/qml/Preferences/Materials/MaterialsPage.qml:90 #: resources/qml/Preferences/ProfilesPage.qml:88 msgctxt "@action:button" msgid "Import" msgstr "Importeren" #: resources/qml/Preferences/Materials/MaterialsPage.qml:101 msgctxt "@action:button" msgid "Sync with Printers" msgstr "Synchroniseren met printers" #: resources/qml/Preferences/Materials/MaterialsPage.qml:174 #: resources/qml/Preferences/ProfilesPage.qml:311 msgctxt "@action:button" msgid "Duplicate" msgstr "Dupliceren" #: resources/qml/Preferences/Materials/MaterialsPage.qml:198 #: resources/qml/Preferences/ProfilesPage.qml:342 msgctxt "@action:button" msgid "Export" msgstr "Exporteren" #: resources/qml/Preferences/Materials/MaterialsPage.qml:212 #: resources/qml/Preferences/ProfilesPage.qml:392 msgctxt "@title:window" msgid "Confirm Remove" msgstr "Verwijderen Bevestigen" #: resources/qml/Preferences/Materials/MaterialsPage.qml:215 #: resources/qml/Preferences/ProfilesPage.qml:393 msgctxt "@label (%1 is object name)" msgid "Are you sure you wish to remove %1? This cannot be undone!" msgstr "Weet u zeker dat u %1 wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!" #: resources/qml/Preferences/Materials/MaterialsPage.qml:228 #: resources/qml/Preferences/Materials/MaterialsPage.qml:238 msgctxt "@title:window" msgid "Import Material" msgstr "Materiaal Importeren" #: resources/qml/Preferences/Materials/MaterialsPage.qml:242 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" msgstr "Materiaal %1 is geïmporteerd" #: resources/qml/Preferences/Materials/MaterialsPage.qml:245 msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not import material %1: %2" msgstr "Kon materiaal %1 niet importeren: %2" #: resources/qml/Preferences/Materials/MaterialsPage.qml:256 #: resources/qml/Preferences/Materials/MaterialsPage.qml:267 msgctxt "@title:window" msgid "Export Material" msgstr "Materiaal Exporteren" #: resources/qml/Preferences/Materials/MaterialsPage.qml:272 msgctxt "@info:status Don't translate the XML tags and !" msgid "Failed to export material to %1: %2" msgstr "Exporteren van materiaal naar %1 is mislukt: %2" #: resources/qml/Preferences/Materials/MaterialsPage.qml:275 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully exported material to %1" msgstr "Materiaal is geëxporteerd naar %1" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:18 msgctxt "@title:window" msgid "Sync materials with printers" msgstr "Synchroniseer materialen met printers" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:49 msgctxt "@title:header" msgid "Sync materials with printers" msgstr "Synchroniseer materialen met printers" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:55 msgctxt "@text" msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers." msgstr "Met een paar simpele stappen kunt u al uw materiaalprofielen synchroniseren met uw printers." #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77 msgctxt "@button" msgid "Why do I need to sync material profiles?" msgstr "Waarom moet ik materiaalprofielen synchroniseren?" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:86 msgctxt "@button" msgid "Start" msgstr "Starten" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:144 msgctxt "@title:header" msgid "Sign in" msgstr "Aanmelden" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:150 msgctxt "@text" msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura." msgstr "Om de materiaalprofielen automatisch te synchroniseren met alle printers die op Digital Factory zijn aangesloten, moet u zich aanmelden bij Cura." #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:174 #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:462 #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:602 msgctxt "@button" msgid "Sync materials with USB" msgstr "Materialen synchroniseren met USB" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207 msgctxt "@title:header" msgid "The following printers will receive the new material profiles:" msgstr "De volgende printers ontvangen de nieuwe materiaalprofielen:" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214 msgctxt "@title:header" msgid "Something went wrong when sending the materials to the printers." msgstr "Er is iets misgegaan bij het verzenden van de materialen naar de printers." #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:221 msgctxt "@title:header" msgid "Material profiles successfully synced with the following printers:" msgstr "Materiaalprofielen zijn gesynchroniseerd met de volgende printers:" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:258 #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:445 msgctxt "@button" msgid "Troubleshooting" msgstr "Probleemoplossing" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:422 msgctxt "@text Asking the user whether printers are missing in a list." msgid "Printers missing?" msgstr "Ontbreken er printers?" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:424 msgctxt "@text" msgid "Make sure all your printers are turned ON and connected to Digital Factory." msgstr "Controleer of alle printers zijn ingeschakeld en zijn aangesloten op Digital Factory." #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:433 msgctxt "@button" msgid "Refresh List" msgstr "Lijst vernieuwen" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:473 msgctxt "@button" msgid "Try again" msgstr "Probeer het opnieuw" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:477 #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:712 msgctxt "@button" msgid "Done" msgstr "Klaar" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:479 #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:622 msgctxt "@button" msgid "Sync" msgstr "Synchroniseren" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:535 msgctxt "@button" msgid "Syncing" msgstr "Synchroniseren" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:553 msgctxt "@title:header" msgid "No printers found" msgstr "Geen printers gevonden" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:574 msgctxt "@text" msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware." msgstr "Mogelijk zijn er geen compatibele printers op Digital Factory aangesloten. Controleer of de printer is aangesloten en de nieuwste firmware op de printer is geïnstalleerd." #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:585 msgctxt "@button" msgid "Learn how to connect your printer to Digital Factory" msgstr "Meer informatie over het aansluiten van de printer op Digital Factory" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:613 msgctxt "@button" msgid "Refresh" msgstr "Vernieuwen" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:642 msgctxt "@title:header" msgid "Sync material profiles via USB" msgstr "Materiaalprofielen synchroniseren via USB" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:648 msgctxt "@text In the UI this is followed by a list of steps the user needs to take." msgid "Follow the following steps to load the new material profiles to your printer." msgstr "Volg onderstaande stappen om nieuwe materiaalprofielen op uw printer te laden." #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679 msgctxt "@text" msgid "Click the export material archive button." msgstr "Klik op de knop Materiaalarchief exporteren." #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680 msgctxt "@text" msgid "Save the .umm file on a USB stick." msgstr "Bewaar het .umm-bestand op een USB-stick." #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681 msgctxt "@text" msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles." msgstr "Steek de USB-stick in de printer en start de procedure om nieuwe materiaalprofielen te laden." #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689 msgctxt "@button" msgid "How to load new material profiles to my printer" msgstr "Hoe u nieuwe materiaalprofielen laadt op Mijn printer" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:703 #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:299 msgctxt "@button" msgid "Back" msgstr "Terug" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:712 msgctxt "@button" msgid "Export material archive" msgstr "Materiaalarchief exporteren" #: resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:747 msgctxt "@title:window" msgid "Export All Materials" msgstr "Alle materialen exporteren" #: resources/qml/Preferences/Materials/MaterialsView.qml:121 msgctxt "@title:window" msgid "Confirm Diameter Change" msgstr "Diameterwijziging bevestigen" #: resources/qml/Preferences/Materials/MaterialsView.qml:122 msgctxt "@label (%1 is a number)" msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?" msgstr "Het nieuwe filament is ingesteld op %1mm. Dit is niet compatibel met de huidige extruder. Wilt u verder gaan?" #: resources/qml/Preferences/Materials/MaterialsView.qml:152 msgctxt "@label" msgid "Display Name" msgstr "Naam" #: resources/qml/Preferences/Materials/MaterialsView.qml:171 msgctxt "@label" msgid "Brand" msgstr "Merk" #: resources/qml/Preferences/Materials/MaterialsView.qml:190 msgctxt "@label" msgid "Material Type" msgstr "Type Materiaal" #: resources/qml/Preferences/Materials/MaterialsView.qml:210 msgctxt "@label" msgid "Color" msgstr "Kleur" #: resources/qml/Preferences/Materials/MaterialsView.qml:262 msgctxt "@title" msgid "Material color picker" msgstr "Kleurkiezer materiaal" #: resources/qml/Preferences/Materials/MaterialsView.qml:275 msgctxt "@label" msgid "Properties" msgstr "Eigenschappen" #: resources/qml/Preferences/Materials/MaterialsView.qml:286 msgctxt "@label" msgid "Density" msgstr "Dichtheid" #: resources/qml/Preferences/Materials/MaterialsView.qml:319 msgctxt "@label" msgid "Diameter" msgstr "Diameter" #: resources/qml/Preferences/Materials/MaterialsView.qml:369 msgctxt "@label" msgid "Filament Cost" msgstr "Kostprijs Filament" #: resources/qml/Preferences/Materials/MaterialsView.qml:401 msgctxt "@label" msgid "Filament weight" msgstr "Gewicht filament" #: resources/qml/Preferences/Materials/MaterialsView.qml:433 msgctxt "@label" msgid "Filament length" msgstr "Lengte filament" #: resources/qml/Preferences/Materials/MaterialsView.qml:451 msgctxt "@label" msgid "Cost per Meter" msgstr "Kostprijs per meter" #: resources/qml/Preferences/Materials/MaterialsView.qml:465 msgctxt "@label" msgid "This material is linked to %1 and shares some of its properties." msgstr "Dit materiaal is gekoppeld aan %1 en deelt hiermee enkele eigenschappen." #: resources/qml/Preferences/Materials/MaterialsView.qml:472 msgctxt "@label" msgid "Unlink Material" msgstr "Materiaal ontkoppelen" #: resources/qml/Preferences/Materials/MaterialsView.qml:485 msgctxt "@label" msgid "Description" msgstr "Beschrijving" #: resources/qml/Preferences/Materials/MaterialsView.qml:503 msgctxt "@label" msgid "Adhesion Information" msgstr "Gegevens Hechting" #: resources/qml/Preferences/Materials/MaterialsView.qml:642 msgctxt "@title" msgid "Information" msgstr "Informatie" #: resources/qml/Preferences/Materials/MaterialsView.qml:647 #: resources/qml/PrintSetupSelector/PrintSetupSelector.qml:18 msgctxt "@label" msgid "Print settings" msgstr "Instellingen voor printen" #: resources/qml/Preferences/ProfilesPage.qml:59 msgctxt "@label" msgid "Profiles compatible with active printer:" msgstr "Profielen die compatibel zijn met actieve printer:" #: resources/qml/Preferences/ProfilesPage.qml:98 msgctxt "@action:tooltip" msgid "Create new profile from current settings/overrides" msgstr "Maak nieuw profiel op basis van huidige instellingen/overschrijvingen" #: resources/qml/Preferences/ProfilesPage.qml:125 msgctxt "@action:label" msgid "Some settings from current profile were overwritten." msgstr "Enkele instellingen van het huidige profiel zijn overschreven." #: resources/qml/Preferences/ProfilesPage.qml:140 msgctxt "@action:button" msgid "Update profile." msgstr "Werk profiel bij." #: resources/qml/Preferences/ProfilesPage.qml:143 msgctxt "@action:tooltip" msgid "Update profile with current settings/overrides" msgstr "Profiel bijwerken met huidige instellingen/overschrijvingen" #: resources/qml/Preferences/ProfilesPage.qml:148 msgctxt "@action:button" msgid "Discard current changes" msgstr "Huidige wijzigingen verwijderen" #: resources/qml/Preferences/ProfilesPage.qml:158 msgctxt "@action:label" msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below." msgstr "Dit profiel gebruikt de standaardinstellingen die door de printer zijn opgegeven, dus er zijn hiervoor geen instellingen/overschrijvingen in de onderstaande lijst." #: resources/qml/Preferences/ProfilesPage.qml:165 msgctxt "@action:label" msgid "Your current settings match the selected profile." msgstr "Uw huidige instellingen komen overeen met het geselecteerde profiel." #: resources/qml/Preferences/ProfilesPage.qml:175 msgctxt "@title:tab" msgid "Global Settings" msgstr "Algemene Instellingen" #: resources/qml/Preferences/ProfilesPage.qml:278 msgctxt "@title:window" msgid "Create Profile" msgstr "Profiel Maken" #: resources/qml/Preferences/ProfilesPage.qml:280 msgctxt "@info" msgid "Please provide a name for this profile." msgstr "Geef een naam op voor dit profiel." #: resources/qml/Preferences/ProfilesPage.qml:352 #: resources/qml/Preferences/ProfilesPage.qml:368 msgctxt "@title:window" msgid "Export Profile" msgstr "Profiel Exporteren" #: resources/qml/Preferences/ProfilesPage.qml:382 msgctxt "@title:window" msgid "Duplicate Profile" msgstr "Profiel Dupliceren" #: resources/qml/Preferences/ProfilesPage.qml:409 msgctxt "@title:window" msgid "Rename Profile" msgstr "Profiel Hernoemen" #: resources/qml/Preferences/ProfilesPage.qml:422 #: resources/qml/Preferences/ProfilesPage.qml:429 msgctxt "@title:window" msgid "Import Profile" msgstr "Profiel Importeren" #: resources/qml/Preferences/SettingVisibilityItem.qml:56 msgctxt "@item:tooltip" msgid "This setting has been hidden by the active machine and will not be visible." msgstr "Deze instelling is door de actieve machine verborgen en wordt niet zichtbaar." #: resources/qml/Preferences/SettingVisibilityItem.qml:73 msgctxt "@item:tooltip %1 is list of setting names" msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible." msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible." msgstr[0] "Deze instelling is verborgen vanwege de waarde van %1. Wijzig de waarde van die instelling om deze instelling zichtbaar te maken." msgstr[1] "Deze instelling is verborgen vanwege de waarden van %1. Wijzig de waarden van die instellingen om deze instelling zichtbaar te maken." #: resources/qml/Preferences/SettingVisibilityPage.qml:13 msgctxt "@title:tab" msgid "Setting Visibility" msgstr "Zichtbaarheid Instellen" #: resources/qml/Preferences/SettingVisibilityPage.qml:55 msgctxt "@label:textbox" msgid "Check all" msgstr "Alles aanvinken" #: resources/qml/PrintMonitor.qml:156 msgctxt "@label" msgid "Active print" msgstr "Actieve print" #: resources/qml/PrintMonitor.qml:164 msgctxt "@label" msgid "Job Name" msgstr "Taaknaam" #: resources/qml/PrintMonitor.qml:172 msgctxt "@label" msgid "Printing Time" msgstr "Printtijd" #: resources/qml/PrintMonitor.qml:180 msgctxt "@label" msgid "Estimated time left" msgstr "Geschatte resterende tijd" #: resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46 msgctxt "@label" msgid "Profile" msgstr "Profiel" #: resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:136 msgctxt "@tooltip" msgid "" "Some setting/override values are different from the values stored in the profile.\n" "\n" "Click to open the profile manager." msgstr "" "Sommige waarden of aanpassingen van instellingen zijn anders dan de waarden die in het profiel zijn opgeslagen.\n" "\n" "Klik om het profielbeheer te openen." #: resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158 msgctxt "@label:header" msgid "Custom profiles" msgstr "Aangepaste profielen" #: resources/qml/PrintSetupSelector/PrintSetupSelector.qml:20 msgctxt "@label shown when we load a Gcode file" msgid "Print setup disabled. G-code file can not be modified." msgstr "De printinstelling is uitgeschakeld. Het G-code-bestand kan niet worden gewijzigd." #: resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:179 msgctxt "@button" msgid "Recommended" msgstr "Aanbevolen" #: resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13 msgctxt "@label:Should be short" msgid "On" msgstr "Aan" #: resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14 msgctxt "@label:Should be short" msgid "Off" msgstr "Uit" #: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:65 msgctxt "@info, %1 is the name of the custom profile" msgid "%1 custom profile is active and you overwrote some settings." msgstr "%1 aangepast profiel is actief en u hebt bepaalde instellingen overschreven." #: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:78 msgctxt "@info, %1 is the name of the custom profile" msgid "%1 custom profile is overriding some settings." msgstr "%1 aangepast profiel overschrijft sommige instellingen." #: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:92 msgctxt "@info %1 is the name of a profile" msgid "Recommended settings (for %1) were altered." msgstr "Aanbevolen instellingen (voor %1) zijn gewijzigd." #: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:106 msgctxt "@info %1 is the name of a profile" msgid "Some setting-values defined in %1 were overridden." msgstr "" #: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:137 msgctxt "@info" msgid "Reset to defaults." msgstr "Terug zetten naar standaardwaarden." #: resources/qml/PrintSetupSelector/ProfileWarningReset.qml:178 msgctxt "@info" msgid "Compare and save." msgstr "Vergelijken en opslaan." #: resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:15 msgctxt "@label" msgid "Adhesion" msgstr "Hechting" #: resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:20 msgctxt "@label" msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards." msgstr "Het printen van een brim of raft inschakelen. Deze optie zorgt ervoor dat er extra materiaal rondom of onder het object wordt neergelegd, dat er naderhand eenvoudig kan worden afgesneden." #: resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:102 msgctxt "@label" msgid "Recommended print settings" msgstr "Aanbevolen print instellingen" #: resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:111 msgctxt "@button" msgid "Show Custom" msgstr "Aangepast" #: resources/qml/PrintSetupSelector/Recommended/RecommendedResolutionSelector.qml:27 msgctxt "@label" msgid "Resolution" msgstr "Resolutie" #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:16 msgctxt "@label" msgid "Strength" msgstr "Kracht" #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:20 msgctxt "@label" msgid "The following settings define the strength of your part." msgstr "De volgende instellingen bepalen de sterkte van uw onderdeel." #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:34 msgctxt "infill_sparse_density description" msgid "Infill Density" msgstr "Vuldichtheid" #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:35 msgctxt "@label" msgid "Adjusts the density of infill of the print." msgstr "Past de vuldichtheid van de print aan." #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:54 msgctxt "@action:label" msgid "Infill Pattern" msgstr "Vulpatroon" #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:56 msgctxt "@label" msgid "" "The pattern of the infill material of the print:\n" "\n" "For quick prints of non functional model choose line, zig zag or lightning infill.\n" "\n" "For functional part not subjected to a lot of stress we recommend grid or triangle or tri hexagon.\n" "\n" "For functional 3D prints which require high strength in multiple directions use cubic, cubic subdivision, quarter cubic, octet, and gyroid." msgstr "" "Het patroon van het invulmateriaal van de print:\n" "\n" "Voor snelle prints van een niet-functioneel model kiest u een lijn-, zigzag- of lichtvulling.\n" "\n" "Voor functionele onderdelen die niet aan veel spanning worden blootgesteld, raden we raster of driehoek of tri-zeshoek aan.\n" "\n" "Gebruik kubieke, kubieke onderverdeling, kwartkubiek, octet en gyrod voor functionele 3D-prints die in meerdere richtingen een hoge sterkte vereisen." #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:67 msgctxt "@action:label" msgid "Shell Thickness" msgstr "Wand Dikte" #: resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml:68 msgctxt "@label" msgid "Defines the thickness of your part side walls, roof and floor." msgstr "Definieert de dikte van de zijwanden, dak en vloer van uw onderdeel." #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:16 msgctxt "@label" msgid "Support" msgstr "Supportstructuur" #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:21 msgctxt "@label" msgid "Generate structures to support parts of the model which have overhangs. Without these structures, these parts would collapse during printing." msgstr "Genereer structuren om delen van het model met overhang te ondersteunen. Zonder deze structuren zakken dergelijke delen in tijdens het printen." #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:40 msgctxt "@action:label" msgid "Support Type" msgstr "Support Type" #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:41 msgctxt "@label" msgid "" "Chooses between the techniques available to generate support. \n" "\n" "\"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \n" "\n" "\"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible." msgstr "Kiest tussen de beschikbare technieken om support te genereren. \"Normale\" support creert een supportstructuur direct onder de overhangende delen en laat die gebieden recht naar beneden vallen. \"Boom\"-support creert takken naar de overhangende gebieden die het model op de toppen van die takken ondersteunen, en laat de takken rond het model kruipen om het zoveel mogelijk vanaf het platform te ondersteunen." #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:53 msgctxt "@action:label" msgid "Print with" msgstr "Print met" #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:54 msgctxt "@label" msgid "The extruder train to use for printing the support. This is used in multi-extrusion." msgstr "De extruder train die wordt gebruikt voor het printen van de supportstructuur. Deze optie wordt gebruikt in meervoudige doorvoer." #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:67 msgctxt "@action:label" msgid "Placement" msgstr "Plaatsing" #: resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:68 msgctxt "support_type description" msgid "Adjusts the placement of the support structures. The placement can be set to touching build plate or everywhere. When set to everywhere the support structures will also be printed on the model." msgstr "Past de plaatsing van de supportstructuur aan. De plaatsing kan worden ingesteld op Platform aanraken of Overal. Wanneer deze optie ingesteld is op Overal, worden de supportstructuren ook op het model geprint." #: resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:31 msgctxt "@error" msgid "Configuration not supported" msgstr "Configuratie niet ondersteund" #: resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:39 msgctxt "@message:text %1 is the name the printer uses for 'nozzle'." msgid "No profiles are available for the selected material/%1 configuration. Please change your configuration." msgstr "Er zijn geen profielen beschikbaar voor de geselecteerde materiaal/%1-configuratie. Wijzig uw configuratie." #: resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:47 msgctxt "@button:label" msgid "Learn more" msgstr "Meer informatie" #: resources/qml/PrinterOutput/ExtruderBox.qml:40 msgctxt "@label" msgid "Extruder" msgstr "Extruder" #: resources/qml/PrinterOutput/ExtruderBox.qml:70 msgctxt "@tooltip" msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." msgstr "De doeltemperatuur van de hot-end. De hot-end wordt verwarmd of afgekoeld totdat deze temperatuur bereikt is. Als deze waarde ingesteld is op 0, wordt de verwarming van de hot-end uitgeschakeld." #: resources/qml/PrinterOutput/ExtruderBox.qml:105 msgctxt "@tooltip" msgid "The current temperature of this hotend." msgstr "De huidige temperatuur van dit hotend." #: resources/qml/PrinterOutput/ExtruderBox.qml:182 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the hotend to." msgstr "De temperatuur waarnaar het hotend moet worden voorverwarmd." #: resources/qml/PrinterOutput/ExtruderBox.qml:271 #: resources/qml/PrinterOutput/HeatedBedBox.qml:259 msgctxt "@button Cancel pre-heating" msgid "Cancel" msgstr "Annuleren" #: resources/qml/PrinterOutput/ExtruderBox.qml:274 #: resources/qml/PrinterOutput/HeatedBedBox.qml:263 msgctxt "@button" msgid "Pre-heat" msgstr "Voorverwarmen" #: resources/qml/PrinterOutput/ExtruderBox.qml:297 msgctxt "@tooltip of pre-heat" msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print." msgstr "Verwarm het hotend voordat u gaat printen. U kunt doorgaan met het aanpassen van uw print terwijl het hotend wordt verwarmd. Zo hoeft u niet te wachten totdat het hotend is opgewarmd wanneer u gereed bent om te printen." #: resources/qml/PrinterOutput/ExtruderBox.qml:335 msgctxt "@tooltip" msgid "The colour of the material in this extruder." msgstr "De kleur van het materiaal in deze extruder." #: resources/qml/PrinterOutput/ExtruderBox.qml:367 msgctxt "@tooltip" msgid "The material in this extruder." msgstr "Het materiaal in deze extruder." #: resources/qml/PrinterOutput/ExtruderBox.qml:400 msgctxt "@tooltip" msgid "The nozzle inserted in this extruder." msgstr "De nozzle die in deze extruder geplaatst is." #: resources/qml/PrinterOutput/HeatedBedBox.qml:25 msgctxt "@label" msgid "Build plate" msgstr "Platform" #: resources/qml/PrinterOutput/HeatedBedBox.qml:55 msgctxt "@tooltip" msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off." msgstr "De doeltemperatuur van het verwarmde bed. Het bed wordt verwarmd of afgekoeld totdat deze temperatuur bereikt is. Als deze waarde ingesteld is op 0, wordt de verwarming van het bed uitgeschakeld." #: resources/qml/PrinterOutput/HeatedBedBox.qml:88 msgctxt "@tooltip" msgid "The current temperature of the heated bed." msgstr "De huidige temperatuur van het verwarmde bed." #: resources/qml/PrinterOutput/HeatedBedBox.qml:162 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the bed to." msgstr "De temperatuur waarnaar het bed moet worden voorverwarmd." #: resources/qml/PrinterOutput/HeatedBedBox.qml:286 msgctxt "@tooltip of pre-heat" msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print." msgstr "Verwarm het bed voordat u gaat printen. U kunt doorgaan met het aanpassen van uw print terwijl het bed wordt verwarmd. Zo hoeft u niet te wachten totdat het bed opgewarmd is wanneer u gereed bent om te printen." #: resources/qml/PrinterOutput/ManualPrinterControl.qml:51 msgctxt "@label" msgid "Printer control" msgstr "Printerbediening" #: resources/qml/PrinterOutput/ManualPrinterControl.qml:66 msgctxt "@label" msgid "Jog Position" msgstr "Jog-positie" #: resources/qml/PrinterOutput/ManualPrinterControl.qml:82 msgctxt "@label" msgid "X/Y" msgstr "X/Y" #: resources/qml/PrinterOutput/ManualPrinterControl.qml:162 msgctxt "@label" msgid "Z" msgstr "Z" #: resources/qml/PrinterOutput/ManualPrinterControl.qml:217 msgctxt "@label" msgid "Jog Distance" msgstr "Jog-afstand" #: resources/qml/PrinterOutput/ManualPrinterControl.qml:257 msgctxt "@label" msgid "Send G-code" msgstr "G-code verzenden" #: resources/qml/PrinterOutput/ManualPrinterControl.qml:319 msgctxt "@tooltip of G-code command input" msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command." msgstr "Verzend een aangepaste G-code-opdracht naar de verbonden printer. Druk op Enter om de opdracht te verzenden." #: resources/qml/PrinterOutput/OutputDeviceHeader.qml:55 msgctxt "@info:status" msgid "The printer is not connected." msgstr "Er is geen verbinding met de printer." #: resources/qml/PrinterSelector/MachineListButton.qml:34 msgctxt "@label" msgid "Hide all connected printers" msgstr "Alle aangesloten printers verbergen" #: resources/qml/PrinterSelector/MachineListButton.qml:47 msgctxt "@label" msgid "Show all connected printers" msgstr "Alle aangesloten printers tonen" #: resources/qml/PrinterSelector/MachineSelector.qml:64 msgctxt "@status" msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet." msgstr "De cloudprinter is offline. Controleer of de printer is ingeschakeld en verbonden is met internet." #: resources/qml/PrinterSelector/MachineSelector.qml:68 msgctxt "@status" msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection." msgstr "Deze printer is niet gekoppeld aan uw account. Ga naar de Ultimaker Digital Factory om een verbinding tot stand te brengen." #: resources/qml/PrinterSelector/MachineSelector.qml:73 msgctxt "@status" msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer." msgstr "De cloudverbinding is momenteel niet beschikbaar. Log in om verbinding te maken met de cloudprinter." #: resources/qml/PrinterSelector/MachineSelector.qml:78 msgctxt "@status" msgid "The cloud connection is currently unavailable. Please check your internet connection." msgstr "De cloudverbinding is momenteel niet beschikbaar. Controleer uw internetverbinding." #: resources/qml/PrinterSelector/MachineSelectorList.qml:30 #: resources/qml/PrinterSelector/MachineSelectorList.qml:32 msgctxt "@label" msgid "Other printers" msgstr "Andere printers" #: resources/qml/ProfileOverview.qml:36 msgctxt "@title:column" msgid "Setting" msgstr "Instelling" #: resources/qml/ProfileOverview.qml:37 msgctxt "@title:column" msgid "Profile" msgstr "Profiel" #: resources/qml/ProfileOverview.qml:38 msgctxt "@title:column" msgid "Current" msgstr "Huidig" #: resources/qml/ProfileOverview.qml:39 msgctxt "@title:column Unit of measurement" msgid "Unit" msgstr "Eenheid" #: resources/qml/SearchBar.qml:17 msgctxt "@placeholder" msgid "Search" msgstr "Zoeken" #: resources/qml/Settings/SettingCategory.qml:115 msgctxt "@label" msgid "" "Some hidden settings use values different from their normal calculated value.\n" "\n" "Click to make these settings visible." msgstr "" "Een aantal verborgen instellingen gebruiken andere waarden dan hun normale berekende waarde.\n" "\n" "Klik om deze instellingen zichtbaar te maken." #: resources/qml/Settings/SettingItem.qml:84 msgctxt "@label" msgid "This setting is not used because all the settings that it influences are overridden." msgstr "Deze instelling wordt niet gebruikt omdat alle instellingen waarop deze invloed heeft, worden overschreven." #: resources/qml/Settings/SettingItem.qml:89 msgctxt "@label Header for list of settings." msgid "Affects" msgstr "Beïnvloedt" #: resources/qml/Settings/SettingItem.qml:94 msgctxt "@label Header for list of settings." msgid "Affected By" msgstr "Beïnvloed door" #: resources/qml/Settings/SettingItem.qml:196 msgctxt "@label" msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders." msgstr "Deze instelling wordt altijd door alle extruders gedeeld. Als u hier de instelling wijzigt, wordt de waarde voor alle extruders gewijzigd." #: resources/qml/Settings/SettingItem.qml:200 msgctxt "@label" msgid "This setting is resolved from conflicting extruder-specific values:" msgstr "Deze instelling wordt afgeleid van strijdige extruderspecifieke waarden:" #: resources/qml/Settings/SettingItem.qml:240 msgctxt "@label" msgid "" "This setting has a value that is different from the profile.\n" "\n" "Click to restore the value of the profile." msgstr "" "Deze instelling heeft een andere waarde dan in het profiel.\n" "\n" "Klik om de waarde van het profiel te herstellen." #: resources/qml/Settings/SettingItem.qml:340 msgctxt "@label" msgid "" "This setting is normally calculated, but it currently has an absolute value set.\n" "\n" "Click to restore the calculated value." msgstr "" "Deze instelling wordt normaliter berekend, maar is nu ingesteld op een absolute waarde.\n" "\n" "Klik om de berekende waarde te herstellen." #: resources/qml/Settings/SettingView.qml:48 msgctxt "@label:textbox" msgid "Search settings" msgstr "Instellingen zoeken" #: resources/qml/Settings/SettingView.qml:395 msgctxt "@action:menu" msgid "Copy value to all extruders" msgstr "Waarde naar alle extruders kopiëren" #: resources/qml/Settings/SettingView.qml:404 msgctxt "@action:menu" msgid "Copy all changed values to all extruders" msgstr "Alle gewijzigde waarden naar alle extruders kopiëren" #: resources/qml/Settings/SettingView.qml:440 msgctxt "@action:menu" msgid "Hide this setting" msgstr "Deze instelling verbergen" #: resources/qml/Settings/SettingView.qml:453 msgctxt "@action:menu" msgid "Don't show this setting" msgstr "Deze instelling verbergen" #: resources/qml/Settings/SettingView.qml:457 msgctxt "@action:menu" msgid "Keep this setting visible" msgstr "Deze instelling zichtbaar houden" #: resources/qml/Toolbar.qml:142 msgctxt "@label %1 is filled in with the name of an extruder" msgid "Print Selected Model with %1" msgid_plural "Print Selected Models with %1" msgstr[0] "Geselecteerd model printen met %1" msgstr[1] "Geselecteerde modellen printen met %1" #: resources/qml/ViewOrientationControls.qml:25 msgctxt "@info:tooltip" msgid "3D View" msgstr "3D-weergave" #: resources/qml/ViewOrientationControls.qml:38 msgctxt "@info:tooltip" msgid "Front View" msgstr "Weergave voorzijde" #: resources/qml/ViewOrientationControls.qml:51 msgctxt "@info:tooltip" msgid "Top View" msgstr "Weergave bovenzijde" #: resources/qml/ViewOrientationControls.qml:64 msgctxt "@info:tooltip" msgid "Left View" msgstr "Linkeraanzicht" #: resources/qml/ViewOrientationControls.qml:77 msgctxt "@info:tooltip" msgid "Right View" msgstr "Rechteraanzicht" #: resources/qml/ViewsSelector.qml:50 msgctxt "@label" msgid "View type" msgstr "Type weergeven" #: resources/qml/WelcomePages/AddCloudPrintersView.qml:47 msgctxt "@label" msgid "Add a Cloud printer" msgstr "Een cloudprinter toevoegen" #: resources/qml/WelcomePages/AddCloudPrintersView.qml:73 msgctxt "@label" msgid "Waiting for Cloud response" msgstr "Wachten op cloudreactie" #: resources/qml/WelcomePages/AddCloudPrintersView.qml:83 msgctxt "@label" msgid "No printers found in your account?" msgstr "Geen printers gevonden in uw account?" #: resources/qml/WelcomePages/AddCloudPrintersView.qml:117 msgctxt "@label" msgid "The following printers in your account have been added in Cura:" msgstr "De volgende printers in uw account zijn toegevoegd in Cura:" #: resources/qml/WelcomePages/AddCloudPrintersView.qml:186 msgctxt "@button" msgid "Add printer manually" msgstr "Printer handmatig toevoegen" #: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "Fabrikant" #: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "Profieleigenaar" #: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "Printernaam" #: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "Geef uw printer een naam" #: resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43 msgctxt "@label" msgid "There is no printer found over your network." msgstr "Kan in uw netwerk geen printer vinden." #: resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162 msgctxt "@label" msgid "Refresh" msgstr "Vernieuwen" #: resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173 msgctxt "@label" msgid "Add printer by IP" msgstr "Printer toevoegen op IP" #: resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:205 msgctxt "@label" msgid "Troubleshooting" msgstr "Probleemoplossing" #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:70 msgctxt "@label" msgid "Add printer by IP address" msgstr "Een printer toevoegen op IP-adres" #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:128 msgctxt "@text" msgid "Enter your printer's IP address." msgstr "Voer het IP-adres van uw printer in." #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:150 msgctxt "@button" msgid "Add" msgstr "Toevoegen" #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:195 msgctxt "@label" msgid "Could not connect to device." msgstr "Kan geen verbinding maken met het apparaat." #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:196 #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:201 msgctxt "@label" msgid "Can't connect to your UltiMaker printer?" msgstr "Kunt u geen verbinding maken met uw UltiMaker-printer?" #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:200 msgctxt "@label" msgid "The printer at this address has not responded yet." msgstr "De printer op dit adres heeft nog niet gereageerd." #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:231 msgctxt "@label" msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group." msgstr "Kan de printer niet toevoegen omdat het een onbekende printer is of omdat het niet de host in een groep is." #: resources/qml/WelcomePages/AddPrinterByIpContent.qml:312 msgctxt "@button" msgid "Connect" msgstr "Verbinding maken" #: resources/qml/WelcomePages/AddThirdPartyPrinter.qml:29 msgctxt "@label" msgid "Add a networked printer" msgstr "Een netwerkprinter toevoegen" #: resources/qml/WelcomePages/AddThirdPartyPrinter.qml:78 msgctxt "@label" msgid "Add a non-networked printer" msgstr "Een niet-netwerkprinter toevoegen" #: resources/qml/WelcomePages/AddThirdPartyPrinter.qml:102 msgctxt "@button" msgid "Add UltiMaker printer via Digital Factory" msgstr "UltiMaker printer toevoegen via Digital Factory" #: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinter.qml:29 msgctxt "@label" msgid "In order to start using Cura you will need to configure a printer." msgstr "Om Cura te gebruiken moet u een printer configureren." #: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinter.qml:36 msgctxt "@label" msgid "What printer would you like to setup?" msgstr "Welke printer wilt u instellen?" #: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinter.qml:55 msgctxt "@button" msgid "UltiMaker printer" msgstr "UltiMaker printer" #: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinter.qml:64 msgctxt "@button" msgid "Non UltiMaker printer" msgstr "Non UltiMaker printer" #: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinter.qml:73 msgctxt "@button" msgid "Learn more about adding printers to Cura" msgstr "Meer informatie over het toevoegen van printers aan Cura" #: resources/qml/WelcomePages/AddUltimakerOrThirdPartyPrinterStack.qml:29 msgctxt "@label" msgid "Add printer" msgstr "Printer toevoegen" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:33 msgctxt "@label" msgid "New UltiMaker printers can be connected to Digital Factory and monitored remotely." msgstr "Nieuwe UltiMaker printers kunnen toegevoegd worden aan Digital Factory om van afstand beheerd te worden" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:70 msgctxt "@label" msgid "If you are trying to add a new UltiMaker printer to Cura" msgstr "Als u een nieuwe UltiMaker-printer probeert toe te voegen aan Cura" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:80 msgctxt "@info" msgid "Sign in into UltiMaker Digital Factory" msgstr "Inloggen bij UltiMaker Digital Factory" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:81 msgctxt "@info" msgid "Follow the procedure to add a new printer" msgstr "Volg de procedure om een nieuwe printer toe te voegen" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:82 msgctxt "@info" msgid "Your new printer will automatically appear in Cura" msgstr "Uw nieuwe printer wordt automatisch weergegeven in Cura" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:100 msgctxt "@button" msgid "Learn more" msgstr "Meer informatie" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:121 msgctxt "@button" msgid "Add local printer" msgstr "Een printer toevoegen" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:129 msgctxt "@button" msgid "Sign in to Digital Factory" msgstr "Inloggen bij Digital Factory" #: resources/qml/WelcomePages/AddUltimakerPrinter.qml:133 msgctxt "@button" msgid "Waiting for new printers" msgstr "Wachten op nieuwe printers" #: resources/qml/WelcomePages/ChangelogContent.qml:24 msgctxt "@label" msgid "Release Notes" msgstr "Release notes" #: resources/qml/WelcomePages/CloudContent.qml:123 msgctxt "@text" msgid "Add material settings and plugins from the Marketplace" msgstr "Voeg materiaalinstellingen en plugins uit de Marktplaats toe" #: resources/qml/WelcomePages/CloudContent.qml:149 msgctxt "@text" msgid "Backup and sync your material settings and plugins" msgstr "Maak een back-up van uw materiaalinstellingen en plug-ins en synchroniseer deze" #: resources/qml/WelcomePages/CloudContent.qml:175 msgctxt "@text" msgid "Share ideas and get help from 48,000+ users in the UltiMaker Community" msgstr "Deel ideeën met 48,000+ gebruikers in de UltiMaker Community of vraag hen om ondersteuning" #: resources/qml/WelcomePages/CloudContent.qml:189 msgctxt "@button" msgid "Skip" msgstr "Overslaan" #: resources/qml/WelcomePages/CloudContent.qml:201 msgctxt "@text" msgid "Create a free UltiMaker Account" msgstr "Maak een gratis UltiMaker-account aan" #: resources/qml/WelcomePages/DropDownWidget.qml:93 msgctxt "@label" msgid "Empty" msgstr "Leeg" #: resources/qml/WelcomePages/UserAgreementContent.qml:23 msgctxt "@label" msgid "User Agreement" msgstr "Gebruikersovereenkomst" #: resources/qml/WelcomePages/UserAgreementContent.qml:67 msgctxt "@button" msgid "Decline and close" msgstr "Afwijzen en sluiten" #: resources/qml/WelcomePages/WhatsNewContent.qml:28 msgctxt "@label" msgid "What's New" msgstr "Nieuwe functies" #: resources/qml/Widgets/ComboBox.qml:18 msgctxt "@label" msgid "No items to select from" msgstr "Geen items om uit te kiezen" #~ msgctxt "@info:status" #~ msgid "Cura does not accurately display layers when Wire Printing is enabled." #~ msgstr "Als Draadprinten is ingeschakeld, geeft Cura lagen niet goed weer." #~ msgctxt "@info:title" #~ msgid "Simulation View" #~ msgstr "Simulatieweergave"