# Copyright (c) 2018 Ultimaker B.V.
# Cura is released under the terms of the LGPLv3 or higher.

import configparser #To parse the files we need to upgrade and write the new files.
import io #To serialise configparser output to a string.
import os
from typing import Dict, List, Set, Tuple
from urllib.parse import quote_plus

from UM.Resources import Resources
from UM.VersionUpgrade import VersionUpgrade

_removed_settings = { #Settings that were removed in 2.5.
    "start_layers_at_same_position",
    "sub_div_rad_mult"
} # type: Set[str]

_split_settings = { #These settings should be copied to all settings it was split into.
    "support_interface_line_distance": {"support_roof_line_distance", "support_bottom_line_distance"}
} # type: Dict[str, Set[str]]


##  A collection of functions that convert the configuration of the user in Cura
#   2.5 to a configuration for Cura 2.6.
#
#   All of these methods are essentially stateless.
class VersionUpgrade25to26(VersionUpgrade):
    def __init__(self) -> None:
        super().__init__()
        self._current_fdm_printer_count = 2

    ##  Upgrades the preferences file from version 2.5 to 2.6.
    #
    #   \param serialised The serialised form of a preferences file.
    #   \param filename The name of the file to upgrade.
    def upgradePreferences(self, serialised: str, filename: str) -> Tuple[List[str], List[str]]:
        parser = configparser.ConfigParser(interpolation = None)
        parser.read_string(serialised)

        #Remove settings from the visible_settings.
        if parser.has_section("general") and "visible_settings" in parser["general"]:
            visible_settings = parser["general"]["visible_settings"].split(";")
            new_visible_settings = []
            for setting in visible_settings:
                if setting in _removed_settings:
                    continue #Skip.
                if setting in _split_settings:
                    for replaced_setting in _split_settings[setting]:
                        new_visible_settings.append(replaced_setting)
                    continue #Don't add the original.
                new_visible_settings.append(setting) #No special handling, so just add the original visible setting back.
            parser["general"]["visible_settings"] = ";".join(new_visible_settings)

        #Change the version number in the file.
        if "general" not in parser:
            parser["general"] = {}
        parser.set("general", "version", "4")

        if "metadata" not in parser:
            parser["metadata"] = {}
        parser.set("metadata", "setting_version", "1")

        #Re-serialise the file.
        output = io.StringIO()
        parser.write(output)
        return [filename], [output.getvalue()]

    ##  Upgrades an instance container from version 2.5 to 2.6.
    #
    #   \param serialised The serialised form of a quality profile.
    #   \param filename The name of the file to upgrade.
    def upgradeInstanceContainer(self, serialised: str, filename: str) -> Tuple[List[str], List[str]]:
        parser = configparser.ConfigParser(interpolation = None)
        parser.read_string(serialised)

        #Remove settings from the [values] section.
        if parser.has_section("values"):
            for removed_setting in (_removed_settings & parser["values"].keys()): #Both in keys that need to be removed and in keys present in the file.
                del parser["values"][removed_setting]
            for replaced_setting in (_split_settings.keys() & parser["values"].keys()):
                for replacement in _split_settings[replaced_setting]:
                    parser["values"][replacement] = parser["values"][replaced_setting] #Copy to replacement before removing the original!
                del replaced_setting

        for each_section in ("general", "metadata"):
            if not parser.has_section(each_section):
                parser.add_section(each_section)

        # Update version numbers
        parser["general"]["version"] = "2"
        parser["metadata"]["setting_version"] = "1"

        #Re-serialise the file.
        output = io.StringIO()
        parser.write(output)
        return [filename], [output.getvalue()]

    ##  Upgrades a machine stack from version 2.5 to 2.6
    #
    #   \param serialised The serialised form of a quality profile.
    #   \param filename The name of the file to upgrade.
    def upgradeMachineStack(self, serialised: str, filename: str) -> Tuple[List[str], List[str]]:
        parser = configparser.ConfigParser(interpolation = None)
        parser.read_string(serialised)

        # NOTE: This is for Custom FDM printers
        # In 2.5, Custom FDM printers don't support multiple extruders, but since 2.6 they do.
        machine_id = parser["general"]["id"]
        quality_container_id = parser["containers"]["2"]
        material_container_id = parser["containers"]["3"]

        # we don't have definition_changes container in 2.5
        if "6" in parser["containers"]:
            definition_container_id = parser["containers"]["6"]
        else:
            definition_container_id = parser["containers"]["5"]

        if definition_container_id == "custom" and not self._checkCustomFdmPrinterHasExtruderStack(machine_id):
            # go through all extruders and make sure that this custom FDM printer has 8 extruder stacks.
            self._acquireNextUniqueCustomFdmPrinterExtruderStackIdIndex()
            for position in range(8):
                self._createCustomFdmPrinterExtruderStack(machine_id, position, quality_container_id, material_container_id)

        # Update version numbers
        parser["general"]["version"] = "3"
        parser["metadata"]["setting_version"] = "1"

        # Re-serialise the file.
        output = io.StringIO()
        parser.write(output)

        return [filename], [output.getvalue()]

    ##  Acquires the next unique extruder stack index number for the Custom FDM Printer.
    def _acquireNextUniqueCustomFdmPrinterExtruderStackIdIndex(self) -> int:
        extruder_stack_dir = os.path.join(Resources.getDataStoragePath(), "extruders")
        file_name_list = os.listdir(extruder_stack_dir)
        file_name_list = [os.path.basename(file_name) for file_name in file_name_list]
        while True:
            self._current_fdm_printer_count += 1
            stack_id_exists = False
            for position in range(8):
                stack_id = "custom_extruder_%s" % (position + 1)
                if self._current_fdm_printer_count > 1:
                    stack_id += " #%s" % self._current_fdm_printer_count

                if stack_id in file_name_list:
                    stack_id_exists = True
                    break
            if not stack_id_exists:
                break

        return self._current_fdm_printer_count

    def _checkCustomFdmPrinterHasExtruderStack(self, machine_id: str) -> bool:
        # go through all extruders and make sure that this custom FDM printer has extruder stacks.
        extruder_stack_dir = os.path.join(Resources.getDataStoragePath(), "extruders")
        has_extruders = False
        for item in os.listdir(extruder_stack_dir):
            file_path = os.path.join(extruder_stack_dir, item)
            if not os.path.isfile(file_path):
                continue

            parser = configparser.ConfigParser()
            try:
                parser.read([file_path])
            except:
                # skip, it is not a valid stack file
                continue

            if "metadata" not in parser:
                continue
            if "machine" not in parser["metadata"]:
                continue

            if machine_id != parser["metadata"]["machine"]:
                continue
            has_extruders = True
            break

        return has_extruders

    def _createCustomFdmPrinterExtruderStack(self, machine_id: str, position: int, quality_id: str, material_id: str) -> None:
        stack_id = "custom_extruder_%s" % (position + 1)
        if self._current_fdm_printer_count > 1:
            stack_id += " #%s" % self._current_fdm_printer_count

        definition_id = "custom_extruder_%s" % (position + 1)

        # create a definition changes container for this stack
        definition_changes_parser = self._getCustomFdmPrinterDefinitionChanges(stack_id)
        definition_changes_id = definition_changes_parser["general"]["name"]
        # create a user settings container
        user_settings_parser = self._getCustomFdmPrinterUserSettings(stack_id)
        user_settings_id = user_settings_parser["general"]["name"]

        parser = configparser.ConfigParser()
        parser.add_section("general")
        parser["general"]["version"] = str(2)
        parser["general"]["name"] = "Extruder %s" % (position + 1)
        parser["general"]["id"] = stack_id

        parser.add_section("metadata")
        parser["metadata"]["type"] = "extruder_train"
        parser["metadata"]["machine"] = machine_id
        parser["metadata"]["position"] = str(position)

        parser.add_section("containers")
        parser["containers"]["0"] = user_settings_id
        parser["containers"]["1"] = "empty_quality_changes"
        parser["containers"]["2"] = quality_id
        parser["containers"]["3"] = material_id
        parser["containers"]["4"] = "empty_variant"
        parser["containers"]["5"] = definition_changes_id
        parser["containers"]["6"] = definition_id

        definition_changes_output = io.StringIO()
        definition_changes_parser.write(definition_changes_output)
        definition_changes_filename = quote_plus(definition_changes_id) + ".inst.cfg"

        user_settings_output = io.StringIO()
        user_settings_parser.write(user_settings_output)
        user_settings_filename = quote_plus(user_settings_id) + ".inst.cfg"

        extruder_output = io.StringIO()
        parser.write(extruder_output)
        extruder_filename = quote_plus(stack_id) + ".extruder.cfg"

        extruder_stack_dir = os.path.join(Resources.getDataStoragePath(), "extruders")
        definition_changes_dir = os.path.join(Resources.getDataStoragePath(), "definition_changes")
        user_settings_dir = os.path.join(Resources.getDataStoragePath(), "user")

        with open(os.path.join(definition_changes_dir, definition_changes_filename), "w", encoding = "utf-8") as f:
            f.write(definition_changes_output.getvalue())
        with open(os.path.join(user_settings_dir, user_settings_filename), "w", encoding = "utf-8") as f:
            f.write(user_settings_output.getvalue())
        with open(os.path.join(extruder_stack_dir, extruder_filename), "w", encoding = "utf-8") as f:
            f.write(extruder_output.getvalue())

    ##  Creates a definition changes container which doesn't contain anything for the Custom FDM Printers.
    #   The container ID will be automatically generated according to the given stack name.
    def _getCustomFdmPrinterDefinitionChanges(self, stack_id: str) -> configparser.ConfigParser:
        # In 2.5, there is no definition_changes container for the Custom FDM printer, so it should be safe to use the
        # default name unless some one names the printer as something like "Custom FDM Printer_settings".
        definition_changes_id = stack_id + "_settings"

        parser = configparser.ConfigParser()
        parser.add_section("general")
        parser["general"]["version"] = str(2)
        parser["general"]["name"] = definition_changes_id
        parser["general"]["definition"] = "custom"

        parser.add_section("metadata")
        parser["metadata"]["type"] = "definition_changes"
        parser["metadata"]["setting_version"] = str(1)

        parser.add_section("values")

        return parser

    ##  Creates a user settings container which doesn't contain anything for the Custom FDM Printers.
    #   The container ID will be automatically generated according to the given stack name.
    def _getCustomFdmPrinterUserSettings(self, stack_id: str) -> configparser.ConfigParser:
        # For the extruder stacks created in the upgrade, also create user_settings containers so the user changes
        # will be saved.
        user_settings_id = stack_id + "_user"

        parser = configparser.ConfigParser()
        parser.add_section("general")
        parser["general"]["version"] = str(2)
        parser["general"]["name"] = user_settings_id
        parser["general"]["definition"] = "custom"

        parser.add_section("metadata")
        parser["metadata"]["extruder"] = stack_id
        parser["metadata"]["type"] = "user"
        parser["metadata"]["setting_version"] = str(1)

        parser.add_section("values")

        return parser