// Copyright (c) 2022 Ultimaker B.V.
// Cura is released under the terms of the LGPLv3 or higher.
import QtQuick 2.15
import QtQuick.Controls 2.4
import UM 1.5 as UM
import Cura 1.0 as Cura
Item
{
implicitWidth: parent.width
height: visible ? UM.Theme.getSize("print_setup_extruder_box").height : 0
property var printerModel
property var connectedPrinter: Cura.MachineManager.printerOutputDevices.length >= 1 ? Cura.MachineManager.printerOutputDevices[0] : null
Rectangle
{
color: UM.Theme.getColor("main_background")
anchors.fill: parent
// Build plate label.
UM.Label
{
text: catalog.i18nc("@label", "Build plate")
anchors.left: parent.left
anchors.top: parent.top
anchors.margins: UM.Theme.getSize("default_margin").width
}
// Target temperature.
UM.Label
{
id: bedTargetTemperature
text: printerModel != null ? Math.round(printerModel.targetBedTemperature) + "°C" : ""
font: UM.Theme.getFont("default_bold")
color: UM.Theme.getColor("text_inactive")
anchors.right: parent.right
anchors.rightMargin: UM.Theme.getSize("default_margin").width
anchors.bottom: bedCurrentTemperature.bottom
// For tooltip.
MouseArea
{
id: bedTargetTemperatureTooltipArea
hoverEnabled: true
anchors.fill: parent
onHoveredChanged:
{
if (containsMouse)
{
base.showTooltip(
base,
{x: 0, y: bedTargetTemperature.mapToItem(base, 0, -parent.height / 4).y},
catalog.i18nc("@tooltip", "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off.")
);
}
else
{
base.hideTooltip();
}
}
}
}
// Current temperature.
UM.Label
{
id: bedCurrentTemperature
text: printerModel != null ? Math.round(printerModel.bedTemperature) + "°C" : ""
font: UM.Theme.getFont("large_bold")
anchors.right: bedTargetTemperature.left
anchors.top: parent.top
anchors.margins: UM.Theme.getSize("default_margin").width
//For tooltip.
MouseArea
{
id: bedTemperatureTooltipArea
hoverEnabled: true
anchors.fill: parent
onHoveredChanged:
{
if (containsMouse)
{
base.showTooltip(
base,
{x: 0, y: bedCurrentTemperature.mapToItem(base, 0, -parent.height / 4).y},
catalog.i18nc("@tooltip", "The current temperature of the heated bed.")
);
}
else
{
base.hideTooltip();
}
}
}
}
//Input field for pre-heat temperature.
Rectangle
{
id: preheatTemperatureControl
color: !enabled ? UM.Theme.getColor("setting_control_disabled") : showError ? UM.Theme.getColor("setting_validation_error_background") : UM.Theme.getColor("setting_validation_ok")
property var showError:
{
if(bedTemperature.properties.maximum_value != "None" && bedTemperature.properties.maximum_value < Math.floor(preheatTemperatureInput.text))
{
return true;
} else
{
return false;
}
}
enabled:
{
if (printerModel == null)
{
return false; //Can't preheat if not connected.
}
if (connectedPrinter == null || !connectedPrinter.acceptsCommands)
{
return false; //Not allowed to do anything.
}
if (connectedPrinter.activePrinter && connectedPrinter.activePrinter.activePrintJob)
{
if((["printing", "pre_print", "resuming", "pausing", "paused", "error", "offline"]).indexOf(connectedPrinter.activePrinter.activePrintJob.state) != -1)
{
return false; //Printer is in a state where it can't react to pre-heating.
}
}
return true;
}
border.width: UM.Theme.getSize("default_lining").width
border.color: !enabled ? UM.Theme.getColor("setting_control_disabled_border") : preheatTemperatureInputMouseArea.containsMouse ? UM.Theme.getColor("setting_control_border_highlight") : UM.Theme.getColor("setting_control_border")
anchors.right: preheatButton.left
anchors.rightMargin: UM.Theme.getSize("default_margin").width
anchors.bottom: parent.bottom
anchors.bottomMargin: UM.Theme.getSize("default_margin").height
width: UM.Theme.getSize("monitor_preheat_temperature_control").width
height: UM.Theme.getSize("monitor_preheat_temperature_control").height
visible: printerModel != null ? enabled && printerModel.canPreHeatBed && !printerModel.isPreheating : true
Rectangle //Highlight of input field.
{
anchors.fill: parent
anchors.margins: UM.Theme.getSize("default_lining").width
color: UM.Theme.getColor("setting_control_highlight")
opacity: preheatTemperatureControl.hovered ? 1.0 : 0
}
MouseArea //Change cursor on hovering.
{
id: preheatTemperatureInputMouseArea
hoverEnabled: true
anchors.fill: parent
cursorShape: Qt.IBeamCursor
onHoveredChanged:
{
if (containsMouse)
{
base.showTooltip(
base,
{x: 0, y: preheatTemperatureInputMouseArea.mapToItem(base, 0, 0).y},
catalog.i18nc("@tooltip of temperature input", "The temperature to pre-heat the bed to.")
);
}
else
{
base.hideTooltip();
}
}
}
UM.Label
{
id: unit
anchors.right: parent.right
anchors.rightMargin: UM.Theme.getSize("setting_unit_margin").width
anchors.verticalCenter: parent.verticalCenter
text: "°C";
color: UM.Theme.getColor("setting_unit")
}
TextInput
{
id: preheatTemperatureInput
font: UM.Theme.getFont("default")
color: !enabled ? UM.Theme.getColor("setting_control_disabled_text") : UM.Theme.getColor("setting_control_text")
selectByMouse: true
maximumLength: 5
enabled: parent.enabled
validator: RegularExpressionValidator { regularExpression: /^-?[0-9]{0,9}[.,]?[0-9]{0,10}$/ } //Floating point regex.
anchors.left: parent.left
anchors.leftMargin: UM.Theme.getSize("setting_unit_margin").width
anchors.right: unit.left
anchors.verticalCenter: parent.verticalCenter
renderType: Text.NativeRendering
text:
{
if (!bedTemperature.properties.value)
{
return "";
}
if ((bedTemperature.resolve != "None" && bedTemperature.resolve) && (bedTemperature.stackLevels[0] != 0) && (bedTemperature.stackLevels[0] != 1))
{
// We have a resolve function. Indicates that the setting is not settable per extruder and that
// we have to choose between the resolved value (default) and the global value
// (if user has explicitly set this).
return bedTemperature.resolve;
}
else
{
return bedTemperature.properties.value;
}
}
}
}
// The pre-heat button.
Cura.SecondaryButton
{
id: preheatButton
height: UM.Theme.getSize("setting_control").height
visible: printerModel != null ? printerModel.canPreHeatBed: true
enabled:
{
if (!preheatTemperatureControl.enabled)
{
return false; //Not connected, not authenticated or printer is busy.
}
if (printerModel.isPreheating)
{
return true;
}
if (bedTemperature.properties.minimum_value != "None" && Math.floor(preheatTemperatureInput.text) < Math.floor(bedTemperature.properties.minimum_value))
{
return false; //Target temperature too low.
}
if (bedTemperature.properties.maximum_value != "None" && Math.floor(preheatTemperatureInput.text) > Math.floor(bedTemperature.properties.maximum_value))
{
return false; //Target temperature too high.
}
if (Math.floor(preheatTemperatureInput.text) == 0)
{
return false; //Setting the temperature to 0 is not allowed (since that cancels the pre-heating).
}
return true; //Preconditions are met.
}
anchors.right: parent.right
anchors.bottom: parent.bottom
anchors.margins: UM.Theme.getSize("default_margin").width
text:
{
if (printerModel == null)
{
return ""
}
if (printerModel.isPreheating )
{
return catalog.i18nc("@button Cancel pre-heating", "Cancel")
}
else
{
return catalog.i18nc("@button", "Pre-heat")
}
}
onClicked:
{
if (!printerModel.isPreheating)
{
printerModel.preheatBed(preheatTemperatureInput.text, 900);
}
else
{
printerModel.cancelPreheatBed();
}
}
onHoveredChanged:
{
if (hovered)
{
base.showTooltip(
base,
{ x: 0, y: preheatButton.mapToItem(base, 0, 0).y },
catalog.i18nc("@tooltip of pre-heat", "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print.")
);
}
else
{
base.hideTooltip();
}
}
}
}
}