{
    "name": "Neptune 2",
    "version": 2,
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "Toylerrr",
        "manufacturer": "Elegoo",
        "platform": "elegoo_neptune_2.stl",
        "platform_offset": [0,0,0],
        "has_machine_quality": true,
        "preferred_quality_type": "normal",
        "file_formats": "text/x-gcode",
        "machine_extruder_trains":
        {
            "0": "elegoo_neptune2_extruder_0"
        }
    },

    "overrides": {
        "machine_name": {"default_value": "ELEGOO Neptune 2"},
        "machine_width": {"default_value": 235},
        "machine_height": {"default_value": 260},
        "machine_depth": {"default_value": 235},
        "machine_heated_bed": {"default_value": true},
        "material_diameter": { "default_value": 1.75 },
		"machine_head_with_fans_polygon": {"value": [[-30, 35], [-30, -10], [25, 35], [25, -10]]},
		"gantry_height": {"value": 30},
        "speed_print": { "value": 60.0 } ,
        "z_seam_type":{"default_value": "back"},
        "z_seam_corner":{"default_value": "z_seam_corner_weighted"},
        "material_standby_temperature":{"default_value": 200,"settable_per_extruder": false},
        "retraction_enable":{"default_value": true},
        "retraction_amount":{"default_value": 5},
        "retraction_speed":{"default_value": 70},
        "adhesion_type":{"default_value": "skirt"},
        "raft_margin":{"default_value": 5},
        "raft_airgap":{"default_value": 0.25},
        "brim_width":{"default_value": 5},
        "skin_angles":{"default_value": [45, 135]},
        "machine_gcode_flavor": {"default_value": "RepRap (Marlin/Sprinter)"},
        "machine_start_gcode": {"default_value": ";simage\n;gimage\nG28 ;home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X1.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X1.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X1.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X1.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up"},
        "machine_end_gcode": {"default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F1600 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z"}
    }
}