[general]
version = 4
name = Normal
definition = ultimaker_s5

[metadata]
setting_version = 20
type = quality
quality_type = fast
weight = -1
material = generic_bam
variant = AA 0.4

[values]
support_infill_sparse_thickness = =2*layer_height
brim_replaces_support = False
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
# prime_tower_enable: see CURA-4248
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
speed_print = 80
speed_layer_0 = =math.ceil(speed_print * 20 / 80)
speed_topbottom = =math.ceil(speed_print * 30 / 80)
speed_wall = =math.ceil(speed_print * 40 / 80)
speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
top_bottom_thickness = 1
support_brim_enable = True
support_interface_enable = True
support_interface_density = =min(extruderValues('material_surface_energy'))
support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
support_angle = 45