[general]
version = 4
name = Suggested parameters for TPU_V1.0
definition = anycubic_kobra_max

[metadata]
setting_version = 20
type = quality
quality_type = tpu
weight = 1
global_quality = True

[values]
layer_height = 0.2
acceleration_enabled = True
jerk_enabled = False
layer_height_0 = 0.3
acceleration_print = 1000
acceleration_travel = 3000
brim_width = 5
cool_fan_speed_0 = 10
default_material_print_temperature = 210
infill_overlap = 15
infill_sparse_density = 15
initial_layer_line_width_factor = 130
jerk_print = 8
jerk_travel = 10
material_final_print_temperature = 210
material_flow = 90
material_flow_layer_0 = 100
material_initial_print_temperature = 210
material_print_temperature_layer_0 = 210
optimize_wall_printing_order = False
retraction_amount = 8
retraction_hop = 0.075
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 1.5
retraction_speed = 60
skirt_brim_speed = 40
speed_layer_0 = 40
speed_print = 80
speed_topbottom = 32
speed_travel = 100
speed_travel_layer_0 = 50
speed_wall = 80
speed_wall_0 = 45
speed_wall_x = 80
speed_z_hop = 10
top_bottom_thickness = 1.2
wall_thickness = 1.2
z_seam_type = sharpest_corner
z_seam_x = 110
z_seam_y = 220