{
    "version": 2,
    "name": "MP Mini Delta",
    "inherits": "fdmprinter",
    "metadata": {
        "author": "MPMD V1 Facebook Group",
        "manufacturer": "Monoprice",
        "file_formats": "text/x-gcode",
        "platform": "mp_mini_delta_platform.3mf",
        "supports_usb_connection": true,
        "has_machine_quality": false,
        "visible": true,
        "platform_offset": [0, 0, 0],
        "has_materials": true,
        "has_variants": false,
        "has_machine_materials": false,
        "has_variant_materials": false,
        "preferred_quality_type": "normal",
        "machine_extruder_trains":
        {
            "0": "mp_mini_delta_extruder_0"
        }
    },

    "overrides": {
        "machine_start_gcode":
        {
            "default_value": ";MPMD V1 Basic Calibration Tutorial: \n; https://www.thingiverse.com/thing:3892011 \n; \n; If you want to put calibration values in your \n; Start Gcode, put them here. \n; \n;If on stock firmware, at minimum, consider adding \n;M665 R here since there is a firmware bug.  \n; \n; Calibration part ends here \n; \nG90 ; switch to absolute positioning \nG92 E0 ; reset extrusion distance \nG1 E20 F200 ; purge 20mm of filament to prime nozzle. \nG92 E0 ; reset extrusion distance \nG4 S5 ; Pause for 5 seconds to allow time for removing extruded filament \nG28 ; start from home position \nG1 E-6 F900 ; retract 6mm of filament before starting the bed leveling process \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for removing extruded filament \nG29 P2 Z0.28 ; Auto-level ; ADJUST Z higher or lower to set first layer height. Start with 0.02 adjustments. \nG1 Z30 ; raise Z 30mm to prepare for priming the nozzle \nG1 E5 F200 ; extrude 5mm of filament to help prime the nozzle just prior to the start of the print \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for cleaning the nozzle and build plate if needed "
        },
        "machine_end_gcode":
        {        
            "default_value": "M107; \nM104 S0; turn off hotend heater \nM140 S0; turn off bed heater \nG91; Switch to use Relative Coordinates \nG1 E-2 F300; retract the filament a bit before lifting the nozzle to release some of the pressure \nG1 Z5 E-5 F4800; move nozzle up a bit and retract filament even more \nG28 X0; return to home positions so the nozzle is out of the way \nM84; turn off stepper motors \nG90; switch to absolute positioning \nM82; absolute extrusion mode"
        },
        "machine_width": { "default_value": 110 },
        "machine_depth": { "default_value": 110 },
        "machine_height": { "default_value": 120 },
        "machine_heated_bed": { "default_value": true },
        "machine_shape": { "default_value": "elliptic" },
        "machine_center_is_zero": { "default_value": true },
        "machine_nozzle_size": {
            "default_value": 0.4
        },
        "layer_height": {
            "default_value": 0.14
        },
        "layer_height_0": {
            "default_value": 0.21
        },
        "material_bed_temperature": { "value": 40 },
        "line_width": { "value": "round(machine_nozzle_size, 2)" },
        "material_bed_temperature_layer_0": { "value": "material_bed_temperature" },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_max_feedrate_x": { "default_value": 150 },
        "machine_max_feedrate_y": { "default_value": 150 },
        "machine_max_feedrate_z": { "default_value": 150 },
        "machine_max_feedrate_e": { "default_value": 50 },
        "machine_max_acceleration_x": { "default_value": 800 },
        "machine_max_acceleration_y": { "default_value": 800 },
        "machine_max_acceleration_z": { "default_value": 800 },
        "machine_max_acceleration_e": { "default_value": 10000 },
        "machine_acceleration": { "default_value": 3000 },
        "machine_max_jerk_xy": { "default_value": 20 },
        "machine_max_jerk_z": { "default_value": 20 },
        "machine_max_jerk_e": { "default_value": 5},
        "retraction_amount": { "default_value": 4 },
        "retraction_speed": { "default_value": 50 },
        "retraction_hop_enabled": { "default_value": false },
        "retract_at_layer_change": { "default_value": true },
        "coasting_enable": { "default_value": true }
    }
}