[general]
name = AA 0.25
version = 4
definition = ultimaker3_extended

[metadata]
setting_version = 5
type = variant
hardware_type = nozzle

[values]
brim_width = 7
infill_line_width = 0.23
infill_overlap = 0
layer_height_0 = 0.17
line_width = 0.23
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
machine_nozzle_id = AA 0.25
machine_nozzle_size = 0.25
machine_nozzle_tip_outer_diameter = 0.65
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
raft_interface_thickness = =layer_height * 1.5
retraction_count_max = 25
retraction_extrusion_window = 1
retraction_min_travel = 0.7
skin_overlap = 15
speed_layer_0 = 20
speed_print = 55
speed_topbottom = 20
speed_wall = =math.ceil(speed_print * 30 / 55)
support_angle = 60
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance
support_z_distance = =layer_height * 2
top_bottom_thickness = 1.2
wall_line_width_x = 0.23
wall_thickness = 1.3