[general]
definition = anycubic_kobra_max
name = Suggested parameters for PLA_V1.0
version = 4

[metadata]
global_quality = True
quality_type = pla
setting_version = 21
type = quality
weight = -2

[values]
acceleration_enabled = True
acceleration_print = 1000
acceleration_travel = 3000
brim_width = 7
default_material_print_temperature = 195
infill_sparse_density = 15
initial_layer_line_width_factor = 140
jerk_enabled = True
jerk_print = 8
jerk_travel = 10
layer_height = 0.2
layer_height_0 = 0.2
material_final_print_temperature = 195
material_flow = 95
material_flow_layer_0 = 120
material_initial_print_temperature = 195
material_print_temperature_layer_0 = 0
optimize_wall_printing_order = True
retraction_amount = 6
retraction_hop = 0.075
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 1.5
retraction_speed = 40
skirt_brim_speed = 40
speed_layer_0 = 45
speed_print = 80
speed_topbottom = 45
speed_travel = 100
speed_travel_layer_0 = 100
speed_wall = 80
speed_wall_0 = 45
speed_wall_x = 80
speed_z_hop = 20
top_bottom_thickness = 1.2
top_thickness = 1.2
wall_thickness = 1.2
z_seam_type = sharpest_corner
z_seam_x = 110
z_seam_y = 220