[general]
version = 4
name = Fine
definition = ultimaker3

[metadata]
setting_version = 6
type = quality
quality_type = normal
weight = 0
material = generic_bam
variant = AA 0.4

[values]
brim_replaces_support = False
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
cool_min_speed = 7
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature - 10
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
skin_overlap = 10
speed_layer_0 = =math.ceil(speed_print * 20 / 70)
support_brim_enable = True
support_interface_enable = True
support_interface_density = =min(extruderValues('material_surface_energy'))
support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
support_angle = 45
support_join_distance = 5
support_offset = 2
support_pattern = triangles
support_infill_rate = 10
top_bottom_thickness = 1
wall_thickness = 1