[general]
definition = ankermake_m5c
name = Normal
version = 4

[metadata]
global_quality = True
quality_type = normal
setting_version = 24
type = quality
weight = 0

[values]
acceleration_infill = 2500
acceleration_layer_0 = 2500
acceleration_prime_tower = 2500
acceleration_print = 2500
acceleration_print_layer_0 = 2500
acceleration_roofing = 2500
acceleration_skirt_brim = 2500
acceleration_support = 2500
acceleration_support_bottom = 2500
acceleration_support_infill = 2500
acceleration_support_interface = 2500
acceleration_support_roof = 2500
acceleration_topbottom = 2500
acceleration_travel = 2500
acceleration_travel_layer_0 = 2500
acceleration_wall = 2500
acceleration_wall_0 = 2500
acceleration_wall_x = 2500
bottom_layers = 4
infill_line_width = 0.40
initial_layer_line_width_factor = 100
jerk_enabled = true
jerk_infill = 10
jerk_layer_0 = 10
jerk_prime_tower = 10
jerk_print = 10
jerk_print_layer_0 = 10
jerk_roofing = 10
jerk_skirt_brim = 10
jerk_support = 10
jerk_support_bottom = 10
jerk_support_infill = 10
jerk_support_interface = 10
jerk_support_roof = 10
jerk_topbottom = 10
jerk_travel = 10
jerk_travel_layer_0 = 10
jerk_wall = 10
jerk_wall_0 = 8
jerk_wall_x = 8
layer_height = 0.2
layer_height_0 = 0.14
line_width = 0.40
min_wall_line_width = 0.10
prime_tower_line_width = 0.40
skin_line_width = 0.40
skirt_brim_line_width = 0.40
skirt_brim_speed = 50
speed_infill = 250
speed_layer_0 = 50
speed_prime_tower = 250
speed_print = 250
speed_print_layer_0 = 50
speed_roofing = 150
speed_support = 150
speed_support_bottom = 100
speed_support_infill = 150
speed_support_interface = 100
speed_support_roof = 100
speed_topbottom = 150
speed_travel = 250
speed_travel_layer_0 = 50
speed_wall = 150
speed_wall_0 = 150
speed_wall_x = 250
support_bottom_line_width = 0.40
support_interface_line_width = 0.40
support_line_width = 0.40
support_roof_line_width = 0.40
top_layers = 4
wall_0_extruder_nr = -1
wall_0_inset = 0
wall_0_wipe_dist = 0.20
wall_extruder_nr = -1
wall_line_count = 3
wall_line_width = 0.40
wall_line_width_0 = 0.44
wall_line_width_x = 0.40
wall_thickness = 1.24
wall_x_extruder_nr = -1