# Copyright (c) 2016 Ultimaker B.V.
# Cura is released under the terms of the LGPLv3 or higher.

import copy
import uuid

from UM.Scene.SceneNodeDecorator import SceneNodeDecorator
from UM.Signal import Signal, signalemitter
from UM.Settings.InstanceContainer import InstanceContainer
from UM.Settings.ContainerRegistry import ContainerRegistry
from UM.Logger import Logger

from UM.Application import Application

from cura.Settings.PerObjectContainerStack import PerObjectContainerStack
from cura.Settings.ExtruderManager import ExtruderManager

@signalemitter
class SettingOverrideDecorator(SceneNodeDecorator):
    """A decorator that adds a container stack to a Node. This stack should be queried for all settings regarding

    the linked node. The Stack in question will refer to the global stack (so that settings that are not defined by
    this stack still resolve.
    """
    activeExtruderChanged = Signal()
    """Event indicating that the user selected a different extruder."""

    _non_printing_mesh_settings = {"anti_overhang_mesh", "infill_mesh", "cutting_mesh"}
    """Non-printing meshes

    If these settings are True for any mesh, the mesh does not need a convex hull,
    and is sent to the slicer regardless of whether it fits inside the build volume.
    Note that Support Mesh is not in here because it actually generates
    g-code in the volume of the mesh.
    """
    _non_thumbnail_visible_settings = {"anti_overhang_mesh", "infill_mesh", "cutting_mesh", "support_mesh"}

    def __init__(self, *, force_update = True):
        super().__init__()
        self._stack = PerObjectContainerStack(container_id = "per_object_stack_" + str(id(self)))
        self._stack.setDirty(False)  # This stack does not need to be saved.
        user_container = InstanceContainer(container_id = self._generateUniqueName())
        user_container.setMetaDataEntry("type", "user")
        self._stack.userChanges = user_container
        self._extruder_stack = ExtruderManager.getInstance().getExtruderStack(0).getId()

        self._is_non_printing_mesh = False
        self._is_non_thumbnail_visible_mesh = False
        self._is_support_mesh = False
        self._is_cutting_mesh = False
        self._is_infill_mesh = False
        self._is_anti_overhang_mesh = False

        self._stack.propertyChanged.connect(self._onSettingChanged)

        Application.getInstance().getContainerRegistry().addContainer(self._stack)

        Application.getInstance().globalContainerStackChanged.connect(self._updateNextStack)
        self.activeExtruderChanged.connect(self._updateNextStack)
        if force_update:
            self._updateNextStack()

    def clearDecoratorData(self) -> None:
        super().clearDecoratorData()
        self._stack = None
        self._extruder_stack = None
        self._is_non_printing_mesh = False
        self._is_non_thumbnail_visible_mesh = False
        self._is_support_mesh = False
        self._is_cutting_mesh = False
        self._is_infill_mesh = False
        self._is_anti_overhang_mesh = False

    def _generateUniqueName(self):
        return "SettingOverrideInstanceContainer-%s" % uuid.uuid1()

    def __deepcopy__(self, memo):
        deep_copy = SettingOverrideDecorator(force_update = False)
        """Create a fresh decorator object"""

        instance_container = copy.deepcopy(self._stack.getContainer(0), memo)
        """Copy the instance"""

        # A unique name must be added, or replaceContainer will not replace it
        instance_container.setMetaDataEntry("id", self._generateUniqueName())

        ## Set the copied instance as the first (and only) instance container of the stack.
        deep_copy._stack.replaceContainer(0, instance_container)

        # Properly set the right extruder on the copy
        deep_copy.setActiveExtruder(self._extruder_stack)

        return deep_copy

    def getActiveExtruder(self):
        """Gets the currently active extruder to print this object with.

        :return: An extruder's container stack.
        """

        return self._extruder_stack

    def getActiveExtruderChangedSignal(self):
        """Gets the signal that emits if the active extruder changed.

        This can then be accessed via a decorator.
        """

        return self.activeExtruderChanged

    def getActiveExtruderPosition(self):
        """Gets the currently active extruders position

        :return: An extruder's position, or None if no position info is available.
        """

        # for support_meshes, always use the support_extruder
        if self._is_support_mesh:
            global_container_stack = Application.getInstance().getGlobalContainerStack()
            if global_container_stack:
                return str(global_container_stack.getProperty("support_extruder_nr", "value"))

        containers = ContainerRegistry.getInstance().findContainers(id = self.getActiveExtruder())
        if containers:
            container_stack = containers[0]
            return container_stack.getMetaDataEntry("position", default=None)

    def isCuttingMesh(self):
        return self._is_cutting_mesh

    def isSupportMesh(self):
        return self._is_support_mesh

    def isInfillMesh(self):
        return self._is_infill_mesh

    def isAntiOverhangMesh(self):
        return self._is_anti_overhang_mesh

    def _evaluateAntiOverhangMesh(self):
        return bool(self._stack.userChanges.getProperty("anti_overhang_mesh", "value"))

    def _evaluateIsCuttingMesh(self):
        return bool(self._stack.userChanges.getProperty("cutting_mesh", "value"))

    def _evaluateIsSupportMesh(self):
        return bool(self._stack.userChanges.getProperty("support_mesh", "value"))

    def _evaluateInfillMesh(self):
        return bool(self._stack.userChanges.getProperty("infill_mesh", "value"))

    def isNonPrintingMesh(self):
        return self._is_non_printing_mesh

    def _evaluateIsNonPrintingMesh(self):
        return any(bool(self._stack.getProperty(setting, "value")) for setting in self._non_printing_mesh_settings)

    def isNonThumbnailVisibleMesh(self):
        return self._is_non_thumbnail_visible_mesh

    def _evaluateIsNonThumbnailVisibleMesh(self):
        return any(bool(self._stack.getProperty(setting, "value")) for setting in self._non_thumbnail_visible_settings)

    def _onSettingChanged(self, setting_key, property_name): # Reminder: 'property' is a built-in function
        # We're only interested in a few settings and only if it's value changed.
        if property_name == "value":
            # Trigger slice/need slicing if the value has changed.
            self._is_non_printing_mesh = self._evaluateIsNonPrintingMesh()
            self._is_non_thumbnail_visible_mesh = self._evaluateIsNonThumbnailVisibleMesh()

            if setting_key == "anti_overhang_mesh":
                self._is_anti_overhang_mesh = self._evaluateAntiOverhangMesh()
            elif setting_key == "support_mesh":
                self._is_support_mesh = self._evaluateIsSupportMesh()
            elif setting_key == "cutting_mesh":
                self._is_cutting_mesh = self._evaluateIsCuttingMesh()
            elif setting_key == "infill_mesh":
                self._is_infill_mesh = self._evaluateInfillMesh()

            Application.getInstance().getBackend().needsSlicing()
            Application.getInstance().getBackend().tickle()

    def _updateNextStack(self):
        """Makes sure that the stack upon which the container stack is placed is

        kept up to date.
        """
        if self._extruder_stack:
            extruder_stack = ContainerRegistry.getInstance().findContainerStacks(id = self._extruder_stack)
            if extruder_stack:
                if self._stack.getNextStack():
                    old_extruder_stack_id = self._stack.getNextStack().getId()
                else:
                    old_extruder_stack_id = ""

                self._stack.setNextStack(extruder_stack[0])
                # Trigger slice/need slicing if the extruder changed.
                if self._stack.getNextStack().getId() != old_extruder_stack_id:
                    Application.getInstance().getBackend().needsSlicing()
                    Application.getInstance().getBackend().tickle()
            else:
                Logger.log("e", "Extruder stack %s below per-object settings does not exist.", self._extruder_stack)
        else:
            self._stack.setNextStack(Application.getInstance().getGlobalContainerStack())

    def setActiveExtruder(self, extruder_stack_id):
        """Changes the extruder with which to print this node.

        :param extruder_stack_id: The new extruder stack to print with.
        """

        self._extruder_stack = extruder_stack_id
        self._updateNextStack()
        ExtruderManager.getInstance().resetSelectedObjectExtruders()
        self.activeExtruderChanged.emit()

    def getStack(self):
        return self._stack