[general]
definition = ultimaker_s3
name = Fast
version = 4

[metadata]
material = ultimaker_pla
quality_type = draft
setting_version = 23
type = quality
variant = AA 0.8
weight = -2

[values]
_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
acceleration_infill = =acceleration_print
acceleration_ironing = 1000
acceleration_layer_0 = =acceleration_wall_0
acceleration_print = 3500
acceleration_roofing = =acceleration_wall_0
acceleration_topbottom = =acceleration_wall
acceleration_wall = =acceleration_infill
acceleration_wall_0 = 1500
acceleration_wall_x = =acceleration_wall
bridge_skin_material_flow = 200
bridge_skin_speed = =bridge_wall_speed
bridge_sparse_infill_max_density = 50
bridge_wall_material_flow = 200
bridge_wall_speed = 30
cool_min_layer_time = 6
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
infill_sparse_density = 15
jerk_infill = =jerk_print
jerk_layer_0 = =jerk_wall_0
jerk_print = =max(30, speed_print/2)
jerk_roofing = =jerk_wall_0
jerk_topbottom = =jerk_wall
jerk_wall = =jerk_infill
jerk_wall_0 = =max(30, speed_wall_0/2)
machine_nozzle_cool_down_speed = 1.3
machine_nozzle_heat_up_speed = 1.9
material_extrusion_cool_down_speed = 0.7
material_flow = 93
material_max_flowrate = 15
material_print_temperature = =default_material_print_temperature + 10
meshfix_maximum_resolution = 0.7
optimize_wall_printing_order = False
raft_airgap = 0.25
retraction_amount = 4
retraction_prime_speed = 22
retraction_speed = 45
small_skin_on_surface = False
small_skin_width = 4
speed_infill = =speed_print
speed_ironing = 20
speed_layer_0 = 30
speed_prime_tower = =speed_wall_0
speed_print = 100
speed_roofing = =math.ceil(speed_wall*(45/100))
speed_support_interface = =speed_wall_0
speed_topbottom = =speed_print
speed_wall = =speed_infill
speed_wall_0 = =math.ceil(speed_wall*(30/100))
speed_wall_x = =speed_wall
speed_wall_x_roofing = =speed_roofing
support_angle = 70
support_interface_enable = False
support_structure = tree
top_bottom_thickness = =max(1 , layer_height * 5)
wall_0_wipe_dist = 0.8
z_seam_relative = True
z_seam_type = back
zig_zaggify_infill = True