{
    "version": 2,
    "name": "Deltacomb 3D",
    "inherits": "fdmprinter",
    "metadata": {
        "author": "Gabriele Rossetti",
        "visible": true,
        "manufacturer": "Deltacomb 3D",
        "category": "Other",
        "file_formats": "text/x-gcode",
        "icon": "icon_ultimaker2",
        "platform": "deltacomb.stl",
        "has_machine_quality": true
    },

    "overrides": {
        "machine_heated_bed":                    { "default_value": true },
        "machine_width":                         { "default_value": 190 },
        "machine_height":                        { "default_value": 250 },
        "machine_depth":                         { "default_value": 190 },
        "machine_center_is_zero":                { "default_value": true },
        "machine_nozzle_size":                   { "default_value": 0.4 },
        "material_diameter":                     { "default_value": 1.75 },
        "machine_gcode_flavor":                  { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_start_gcode":                   { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home all axes (max endstops)\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."},
        "machine_end_gcode":                     { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG28 ;Home all axes (max endstops)\nM84 ;steppers off\nG90 ;absolute positioning" },
        "machine_shape":                         { "default_value": "elliptic" },
        "retraction_hop_enabled":                { "default_value": true },
        "retraction_amount" :                    { "default_value": 3.5 },
        "retraction_speed" :                     { "default_value": 50 },
        "material_diameter":                     { "default_value": 1.75 },
        "material_final_print_temperature":      { "value": "material_print_temperature - 5" },
        "material_initial_print_temperature":    { "value": "material_print_temperature" },
        "material_print_temperature_layer_0":    { "value": "material_print_temperature + 5" },
        "travel_avoid_distance":                 { "default_value": 1, "value": "1" },
        "speed_print" :                          { "default_value": 60 },
        "speed_travel":                          { "value": "150.0" },
        "speed_infill":                          { "value": "round(speed_print * 1.05, 0)" },
        "speed_topbottom":                       { "value": "round(speed_print * 0.95, 0)" },
        "speed_wall":                            { "value": "speed_print" },
        "speed_wall_0":                          { "value": "20" },
        "speed_wall_x":                          { "value": "speed_wall" },
        "speed_layer_0":                         { "value": "min(round(speed_print * 0.75, 0), 45.0)" },
        "speed_travel_layer_0":                  { "value": "round(speed_travel * 0.7, 0)" },
        "skirt_brim_speed":                      { "value": "speed_layer_0" },
        "skirt_line_count":                      { "default_value": 3 },
        "skirt_brim_minimal_length":             { "default_value": 150 },
        "infill_sparse_density":                 { "default_value": 90 },
        "gradual_infill_steps":                  { "default_value": 2 },
        "infill_before_walls" :                  { "default_value": false },
        "top_bottom_thickness":                  { "default_value": 0.6 },
        "support_z_distance":                    { "value": "layer_height * 2" },
        "support_bottom_distance":               { "value": "layer_height" },
        "support_use_towers" :                   { "default_value": false }
    }
}