# Cura
# Copyright (C) 2022 Ultimaker B.V.
# This file is distributed under the same license as the Cura package.
#
msgid ""
msgstr ""
"Project-Id-Version: Cura 5.1\n"
"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
"POT-Creation-Date: 2022-06-21 12:50+0200\n"
"PO-Revision-Date: 2021-09-07 08:02+0200\n"
"Last-Translator: Mariusz Matłosz <matliks@gmail.com>\n"
"Language-Team: Mariusz Matłosz <matliks@gmail.com>, reprapy.pl\n"
"Language: pl_PL\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Generator: Poedit 3.0\n"
"X-Poedit-SourceCharset: UTF-8\n"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
msgctxt "@label"
msgid "Unknown"
msgstr "Nieznany"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
msgctxt "@label"
msgid "The printer(s) below cannot be connected because they are part of a group"
msgstr "Poniższa drukarka nie może być podłączona, ponieważ jest częścią grupy"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
msgctxt "@label"
msgid "Available networked printers"
msgstr "Dostępne drukarki sieciowe"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:219
msgctxt "@menuitem"
msgid "Not overridden"
msgstr "Nie zastąpione"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:138
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
msgctxt "@label"
msgid "Connected printers"
msgstr "Podłączone drukarki"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:138
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
msgctxt "@label"
msgid "Preset printers"
msgstr "Zdefiniowane drukarki"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:143
#, python-brace-format
msgctxt "@label {0} is the name of a printer that's about to be deleted."
msgid "Are you sure you wish to remove {0}? This cannot be undone!"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:61
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
msgctxt "@label"
msgid "Default"
msgstr "Domyślne"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:65
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
msgctxt "@label"
msgid "Visual"
msgstr "Wizualny"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:66
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
msgctxt "@text"
msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
msgstr "Profil wizualny jest przeznaczony do drukowania prototypów i modeli z zamiarem podkreślenia wysokiej jakości wizualnej i powierzchni."

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:70
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
msgctxt "@label"
msgid "Engineering"
msgstr "Inżynieria"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:71
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
msgctxt "@text"
msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
msgstr "Profil inżynieryjny jest przeznaczony do drukowania prototypów funkcjonalnych i części końcowych z naciskiem na lepszą dokładność i lepszą tolerancję."

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:75
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
msgctxt "@label"
msgid "Draft"
msgstr "Szkic"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:76
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
msgctxt "@text"
msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
msgstr "Profil szkicu służy do drukowania początkowych prototypów i weryfikacji koncepcji z naciskiem na krótki czasu drukowania."

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:232
msgctxt "@label"
msgid "Custom Material"
msgstr "Niestandardowy materiał"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:233
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:340
msgctxt "@label"
msgid "Custom"
msgstr "Niestandardowy"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:391
msgctxt "@label"
msgid "Custom profiles"
msgstr "Profile niestandardowe"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:426
#, python-brace-format
msgctxt "@item:inlistbox"
msgid "All Supported Types ({0})"
msgstr "Wszystkie Wspierane Typy ({0})"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:427
msgctxt "@item:inlistbox"
msgid "All Files (*)"
msgstr "Wszystkie Pliki (*)"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualitySettingsModel.py:182
msgctxt "@info:status"
msgid "Calculated"
msgstr "Przeliczone"

#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:190
msgctxt "@info:title"
msgid "Login failed"
msgstr "Logowanie nie powiodło się"

#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
msgctxt "@info:status"
msgid "Finding new location for objects"
msgstr "Znajdowanie nowej lokalizacji obiektów"

#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
msgctxt "@info:title"
msgid "Finding Location"
msgstr "Szukanie Lokalizacji"

#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:99
msgctxt "@info:status"
msgid "Unable to find a location within the build volume for all objects"
msgstr "Nie można znaleźć lokalizacji w obrębie obszaru roboczego dla wszystkich obiektów"

#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
msgctxt "@info:title"
msgid "Can't Find Location"
msgstr "Nie można Znaleźć Lokalizacji"

#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:115
msgctxt "@info:backup_failed"
msgid "Could not create archive from user data directory: {}"
msgstr "Nie można utworzyć archiwum z folderu danych użytkownika: {}"

#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:122
#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:159
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
msgctxt "@info:title"
msgid "Backup"
msgstr "Kopia zapasowa"

#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
msgctxt "@info:backup_failed"
msgid "Tried to restore a Cura backup without having proper data or meta data."
msgstr "Podjęto próbę przywrócenia kopii zapasowej Cura na podstawie niepoprawnych danych lub metadanych."

#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:145
msgctxt "@info:backup_failed"
msgid "Tried to restore a Cura backup that is higher than the current version."
msgstr "Próbowano przywrócić kopię zapasową Cura, nowszą od aktualnej wersji."

#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:158
msgctxt "@info:backup_failed"
msgid "The following error occurred while trying to restore a Cura backup:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
msgctxt "@info:status"
msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
msgstr "Wysokość obszaru roboczego została zmniejszona ze względu na wartość ustawienia Print Sequence (Sekwencja wydruku), aby zapobiec kolizji z wydrukowanymi modelami."

#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:103
msgctxt "@info:title"
msgid "Build Volume"
msgstr "Obszar Roboczy"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
msgctxt "@title:window"
msgid "Cura can't start"
msgstr "Cura nie może się uruchomić"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
msgctxt "@label crash message"
msgid ""
"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
"                    <p>Backups can be found in the configuration folder.</p>\n"
"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
"                "
msgstr ""
"<p><b>Ups, Ultimaker Cura natrafiła coś co nie wygląda dobrze.</p></b>\n"
"                    <p>Natrafiliśmy na nieodwracalny błąd podczas uruchamiania. Prawdopodobnie jest to spowodowane błędem w plikach konfiguracyjnych. Zalecamy backup i reset konfiguracji.</p>\n"
"                    <p>Backupy mogą być znalezione w folderze konfiguracyjnym.</p>\n"
"                    <p>Proszę wyślij do nas ten Raport Błędu, aby rozwiązać problem.</p>\n"
"              "

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
msgctxt "@action:button"
msgid "Send crash report to Ultimaker"
msgstr "Wyślij raport błędu do Ultimaker"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
msgctxt "@action:button"
msgid "Show detailed crash report"
msgstr "Pokaż szczegółowy raport błędu"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
msgctxt "@action:button"
msgid "Show configuration folder"
msgstr "Pokaż folder konfiguracyjny"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
msgctxt "@action:button"
msgid "Backup and Reset Configuration"
msgstr "Zrób Backup i Zresetuj Konfigurację"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
msgctxt "@title:window"
msgid "Crash Report"
msgstr "Raport Błędu"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
msgctxt "@label crash message"
msgid ""
"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
"        "
msgstr ""
"<p><b>Wystąpił błąd krytyczny. Proszę wyślij do nas ten Raport Błędu, aby rozwiązać problem</p></b>\n"
"            <p>Proszę użyj przycisku \"Wyślij raport\", aby wysłać raport błędu automatycznie na nasze serwery</p>\n"
"        "

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
msgctxt "@title:groupbox"
msgid "System information"
msgstr "Informacje o systemie"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
msgctxt "@label unknown version of Cura"
msgid "Unknown"
msgstr "Nieznany"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
msgctxt "@label Cura version number"
msgid "Cura version"
msgstr "Wersja Cura"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
msgctxt "@label"
msgid "Cura language"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
msgctxt "@label"
msgid "OS language"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
msgctxt "@label Type of platform"
msgid "Platform"
msgstr "Platforma"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
msgctxt "@label"
msgid "Qt version"
msgstr "Wersja Qt"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
msgctxt "@label"
msgid "PyQt version"
msgstr "Wersja PyQt"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
msgctxt "@label OpenGL version"
msgid "OpenGL"
msgstr "OpenGL"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
msgctxt "@label"
msgid "Not yet initialized"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
#, python-brace-format
msgctxt "@label OpenGL version"
msgid "<li>OpenGL Version: {version}</li>"
msgstr "<li>Wersja OpenGL: {version}</li>"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
#, python-brace-format
msgctxt "@label OpenGL vendor"
msgid "<li>OpenGL Vendor: {vendor}</li>"
msgstr "<li>Wydawca OpenGL: {vendor}</li>"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
#, python-brace-format
msgctxt "@label OpenGL renderer"
msgid "<li>OpenGL Renderer: {renderer}</li>"
msgstr "<li>OpenGL Renderer: {renderer}</li>"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:304
msgctxt "@title:groupbox"
msgid "Error traceback"
msgstr "Śledzenie błedu"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:390
msgctxt "@title:groupbox"
msgid "Logs"
msgstr "Logi"

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:418
msgctxt "@action:button"
msgid "Send report"
msgstr "Wyślij raport"

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:531
msgctxt "@info:progress"
msgid "Loading machines..."
msgstr "Ładowanie drukarek..."

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:538
msgctxt "@info:progress"
msgid "Setting up preferences..."
msgstr "Ustawianie preferencji..."

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:683
msgctxt "@info:progress"
msgid "Initializing Active Machine..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:823
msgctxt "@info:progress"
msgid "Initializing machine manager..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:837
msgctxt "@info:progress"
msgid "Initializing build volume..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:905
msgctxt "@info:progress"
msgid "Setting up scene..."
msgstr "Ustawianie sceny ..."

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:941
msgctxt "@info:progress"
msgid "Loading interface..."
msgstr "Ładowanie interfejsu ..."

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:946
msgctxt "@info:progress"
msgid "Initializing engine..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1272
#, python-format
msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
msgid "%(width).1f x %(depth).1f x %(height).1f mm"
msgstr "%(width).1f x %(depth).1f x %(height).1f mm"

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1798
#, python-brace-format
msgctxt "@info:status"
msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
msgstr "Jednocześnie można załadować tylko jeden plik G-code. Pominięto importowanie {0}"

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1800
#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:217
#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:189
msgctxt "@info:title"
msgid "Warning"
msgstr "Ostrzeżenie"

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1810
#, python-brace-format
msgctxt "@info:status"
msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
msgstr "Nie można otworzyć żadnego innego pliku, jeśli ładuje się G-code. Pominięto importowanie {0}"

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1812
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:166
#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
msgctxt "@info:title"
msgid "Error"
msgstr "Błąd"

#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:30
msgctxt "@info:status"
msgid "Multiplying and placing objects"
msgstr "Zwielokrotnienie i umieszczanie przedmiotów"

#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:32
msgctxt "@info:title"
msgid "Placing Objects"
msgstr "Umieść Obiekty"

#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:100
msgctxt "@info:title"
msgid "Placing Object"
msgstr "Rozmieszczenie Obiektów"

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:89
msgctxt "@message"
msgid "Could not read response."
msgstr "Nie można odczytać odpowiedzi."

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
msgctxt "@message"
msgid "The provided state is not correct."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
msgctxt "@message"
msgid "Timeout when authenticating with the account server."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
msgctxt "@message"
msgid "Please give the required permissions when authorizing this application."
msgstr "Proszę nadać wymagane uprawnienia podczas autoryzacji tej aplikacji."

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
msgctxt "@message"
msgid "Something unexpected happened when trying to log in, please try again."
msgstr "Coś nieoczekiwanego się stało, podczas próby logowania, spróbuj ponownie."

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:216
msgctxt "@info"
msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:277
msgctxt "@info"
msgid "Unable to reach the Ultimaker account server."
msgstr "Nie można uzyskać dostępu do serwera kont Ultimaker."

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:278
msgctxt "@info:title"
msgid "Log-in failed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
msgctxt "@text:error"
msgid "Failed to create archive of materials to sync with printers."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
msgctxt "@text:error"
msgid "Failed to load the archive of materials to sync it with printers."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
msgctxt "@text:error"
msgid "The response from Digital Factory appears to be corrupted."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
msgctxt "@text:error"
msgid "The response from Digital Factory is missing important information."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
msgctxt "@text:error"
msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
msgctxt "@text:error"
msgid "Failed to connect to Digital Factory."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:207
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:140
msgctxt "@title:window"
msgid "File Already Exists"
msgstr "Plik już istnieje"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:208
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:141
#, python-brace-format
msgctxt "@label Don't translate the XML tag <filename>!"
msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
msgstr "Plik <filename>{0}</filename> już istnieje. Czy na pewno chcesz go nadpisać?"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:459
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:462
msgctxt "@info:status"
msgid "Invalid file URL:"
msgstr "Nieprawidłowy adres URL pliku:"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
msgstr "Nie udało się wyeksportować profilu do <filename>{0}</filename>: <message>{1}</message>"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:163
#, python-brace-format
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
msgstr "Nie można eksportować profilu do <filename>{0}</filename>: Wtyczka pisarza zgłosiła błąd."

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:171
#, python-brace-format
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Exported profile to <filename>{0}</filename>"
msgstr "Wyeksportowano profil do <filename>{0}</filename>"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:173
msgctxt "@info:title"
msgid "Export succeeded"
msgstr "Eksport udany"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:205
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "Failed to import profile from <filename>{0}</filename>: {1}"
msgstr "Nie powiódł się import profilu z <filename>{0}</filename>: {1}"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:209
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
msgstr "Nie można importować profilu z <filename>{0}</filename> przed dodaniem drukarki."

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:224
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "No custom profile to import in file <filename>{0}</filename>"
msgstr "Brak niestandardowego profilu do importu w pliku <filename>{0}</filename>"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:228
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "Failed to import profile from <filename>{0}</filename>:"
msgstr "Nie powiódł się import profilu z <filename>{0}</filename>:"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:252
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:262
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
msgstr "Profil <filename>{0}</filename> zawiera błędne dane, nie można go importować."

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:355
#, python-brace-format
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Failed to import profile from <filename>{0}</filename>:"
msgstr "Błąd importu profilu z <filename>{0}</filename>:"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:359
#, python-brace-format
msgctxt "@info:status"
msgid "Successfully imported profile {0}."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:366
#, python-brace-format
msgctxt "@info:status"
msgid "File {0} does not contain any valid profile."
msgstr "Plik {0} nie zawiera żadnego poprawnego profilu."

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:369
#, python-brace-format
msgctxt "@info:status"
msgid "Profile {0} has an unknown file type or is corrupted."
msgstr "Profil {0} ma nieznany typ pliku lub jest uszkodzony."

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
msgctxt "@label"
msgid "Custom profile"
msgstr "Niestandardowy profil"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:459
msgctxt "@info:status"
msgid "Profile is missing a quality type."
msgstr "Profilowi brakuje typu jakości."

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
msgctxt "@info:status"
msgid "There is no active printer yet."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:469
msgctxt "@info:status"
msgid "Unable to add the profile."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:483
#, python-brace-format
msgctxt "@info:status"
msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:488
#, python-brace-format
msgctxt "@info:status"
msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
msgctxt "@info:not supported profile"
msgid "Not supported"
msgstr "Niewspierany"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
msgctxt "@info:No intent profile selected"
msgid "Default"
msgstr "Domyślne"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:713
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:219
msgctxt "@label"
msgid "Nozzle"
msgstr "Dysza"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:857
msgctxt "@info:message Followed by a list of settings."
msgid "Settings have been changed to match the current availability of extruders:"
msgstr "Ustawienia zostały zmienione w celu dopasowania do bieżącej dostępności ekstruderów:"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:858
msgctxt "@info:title"
msgid "Settings updated"
msgstr "Ustawienia zostały zaaktualizowane"

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1480
msgctxt "@info:title"
msgid "Extruder(s) Disabled"
msgstr "Ekstruder(y) wyłączony(/e)"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
msgctxt "@action:button"
msgid "Add"
msgstr "Dodaj"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:290
msgctxt "@action:button"
msgid "Finish"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:508
#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:323
#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:147
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ColorDialog.qml:139
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:291
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:74
msgctxt "@action:button"
msgid "Cancel"
msgstr "Anuluj"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
#, python-brace-format
msgctxt "@label"
msgid "Group #{group_nr}"
msgstr "Grupa #{group_nr}"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
msgctxt "@tooltip"
msgid "Outer Wall"
msgstr "Zewnętrzna ściana"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
msgctxt "@tooltip"
msgid "Inner Walls"
msgstr "Ściany wewnętrzne"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
msgctxt "@tooltip"
msgid "Skin"
msgstr "Skin"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
msgctxt "@tooltip"
msgid "Infill"
msgstr "Wypełnienie"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
msgctxt "@tooltip"
msgid "Support Infill"
msgstr "Wypełnienie podpór"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
msgctxt "@tooltip"
msgid "Support Interface"
msgstr "Łączenie podpory"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
msgctxt "@tooltip"
msgid "Support"
msgstr "Podpory"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
msgctxt "@tooltip"
msgid "Skirt"
msgstr "Obwódka"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
msgctxt "@tooltip"
msgid "Prime Tower"
msgstr "Wieża czyszcząca"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
msgctxt "@tooltip"
msgid "Travel"
msgstr "Ruch jałowy"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:95
msgctxt "@tooltip"
msgid "Retractions"
msgstr "Retrakcja"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:96
msgctxt "@tooltip"
msgid "Other"
msgstr "Inny"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:37
#: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:63
msgctxt "@text:window"
msgid "The release notes could not be opened."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:57
#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:277
msgctxt "@action:button"
msgid "Next"
msgstr "Następny"

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:286
#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:67
msgctxt "@action:button"
msgid "Skip"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:72
#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:175
#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:443
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:186
msgctxt "@action:button"
msgid "Close"
msgstr "Zamknij"

#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
msgctxt "@action:button"
msgid "Please sync the material profiles with your printers before starting to print."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
msgctxt "@action:button"
msgid "New materials installed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
msgctxt "@action:button"
msgid "Sync materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:397
#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:80
msgctxt "@action:button"
msgid "Learn more"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
msgctxt "@message:text"
msgid "Could not save material archive to {}:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
msgctxt "@message:title"
msgid "Failed to save material archive"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
msgctxt "@text"
msgid "Unknown error."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
msgctxt "@info:title"
msgid "3D Model Assistant"
msgstr "Asystent Modelu 3D"

#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:97
#, python-brace-format
msgctxt "@info:status"
msgid ""
"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
"<p>{model_names}</p>\n"
"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
msgstr ""
"<p>Jeden lub więcej modeli 3D może nie zostać wydrukowanych optymalnie ze względu na wymiary modelu oraz konfigurację materiału:</p>\n"
"<p>{model_names}</p>\n"
"<p>Dowiedz się, jak zapewnić najlepszą możliwą jakość oraz niezawodnośc wydruku.</p>\n"
"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Zobacz przewodnik po jakości wydruku (strona w języku angielskim)</a></p>"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
msgstr "Plik projektu <filename>{0}</filename> zawiera nieznany typ maszyny <message>{1}</message>. Nie można zaimportować maszyny. Zostaną zaimportowane modele."

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:548
msgctxt "@info:title"
msgid "Open Project File"
msgstr "Otwórz Plik Projektu"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
#, python-brace-format
msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:659
msgctxt "@info:title"
msgid "Can't Open Project File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:658
#, python-brace-format
msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:711
#, python-brace-format
msgctxt "@info:error Don't translate the XML tag <filename>!"
msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:212
msgctxt "@title:tab"
msgid "Recommended"
msgstr "Zalecane"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:214
msgctxt "@title:tab"
msgid "Custom"
msgstr "Niestandardowe"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:390
msgctxt "@info:status"
msgid "The material used in this project relies on some material definitions not available in Cura, this might produce undesirable print results. We highly recommend installing the full material package from the Marketplace."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:392
msgctxt "@info:title"
msgid "Material profiles not installed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:405
msgctxt "@action:button"
msgid "Install Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
msgctxt "@item:inlistbox"
msgid "3MF File"
msgstr "Plik 3MF"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
msgctxt "@error:zip"
msgid "3MF Writer plug-in is corrupt."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
msgctxt "@error"
msgid "There is no workspace yet to write. Please add a printer first."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
msgctxt "@error:zip"
msgid "No permission to write the workspace here."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
msgctxt "@error:zip"
msgid "The operating system does not allow saving a project file to this location or with this file name."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:238
msgctxt "@error:zip"
msgid "Error writing 3mf file."
msgstr "Błąd zapisu pliku 3mf."

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:282
#, python-brace-format
msgctxt "@error:material"
msgid "It was not possible to store material package information in project file: {material}. This project may not open correctly on other systems."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:283
msgctxt "@info:title"
msgid "Failed to save material package information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:28
msgctxt "@item:inlistbox"
msgid "3MF file"
msgstr "Plik 3MF"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:36
msgctxt "@item:inlistbox"
msgid "Cura Project 3MF file"
msgstr "Plik Cura Project 3MF"

#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
msgctxt "@item:inlistbox"
msgid "AMF File"
msgstr "Plik AMF"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
msgctxt "@info:title"
msgid "Backups"
msgstr "Kopie zapasowe"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
msgctxt "@info:backup_status"
msgid "There was an error while uploading your backup."
msgstr "Wystąpił błąd podczas wgrywania kopii zapasowej."

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
msgctxt "@info:backup_status"
msgid "Creating your backup..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
msgctxt "@info:backup_status"
msgid "There was an error while creating your backup."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
msgctxt "@info:backup_status"
msgid "Uploading your backup..."
msgstr "Wgrywanie kopii zapasowej..."

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
msgctxt "@info:backup_status"
msgid "Your backup has finished uploading."
msgstr "Wgrywanie kopii zapasowej zakończone."

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
msgctxt "@error:file_size"
msgid "The backup exceeds the maximum file size."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:86
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
msgctxt "@info:backup_status"
msgid "There was an error trying to restore your backup."
msgstr "Wystąpił błąd podczas próby przywrócenia kopii zapasowej."

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
msgctxt "@item:inmenu"
msgid "Manage backups"
msgstr "Zarządzaj kopiami zapasowymi"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
msgctxt "@message"
msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
msgctxt "@message:title"
msgid "Slicing failed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
msgctxt "@message:button"
msgid "Report a bug"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
msgctxt "@message:description"
msgid "Report a bug on Ultimaker Cura's issue tracker."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:400
msgctxt "@info:status"
msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
msgstr "Nie można pociąć z obecnym materiałem, ponieważ nie jest on kompatybilny z wybraną maszyną lub konfiguracją."

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:401
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:434
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:461
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:473
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:485
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:498
msgctxt "@info:title"
msgid "Unable to slice"
msgstr "Nie można pociąć"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:433
#, python-brace-format
msgctxt "@info:status"
msgid "Unable to slice with the current settings. The following settings have errors: {0}"
msgstr "Nie można pociąć z bieżącymi ustawieniami. Następujące ustawienia mają błędy: {0}"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:460
#, python-brace-format
msgctxt "@info:status"
msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
msgstr "Nie można pokroić przez ustawienia osobne dla modelu. Następujące ustawienia mają błędy w jednym lub więcej modeli: {error_labels}"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:472
msgctxt "@info:status"
msgid "Unable to slice because the prime tower or prime position(s) are invalid."
msgstr "Nie można pociąć, ponieważ wieża czyszcząca lub jej pozycja(e) są niewłaściwe."

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:484
#, python-format
msgctxt "@info:status"
msgid "Unable to slice because there are objects associated with disabled Extruder %s."
msgstr "Nie można pociąć, ponieważ obecne są obiekty powiązane z wyłączonym ekstruderem %s."

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:494
msgctxt "@info:status"
msgid ""
"Please review settings and check if your models:\n"
"- Fit within the build volume\n"
"- Are assigned to an enabled extruder\n"
"- Are not all set as modifier meshes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
msgctxt "@info:status"
msgid "Processing Layers"
msgstr "Przetwarzanie warstw"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
msgctxt "@info:title"
msgid "Information"
msgstr "Informacja"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
msgctxt "@item:inlistbox"
msgid "Cura Profile"
msgstr "Profile Cura"

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
msgctxt "@info"
msgid "Could not access update information."
msgstr "Nie można uzyskać dostępu do informacji o aktualizacji."

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
#, python-brace-format
msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
#, python-format
msgctxt "@info:title The %s gets replaced with the printer name."
msgid "New %s stable firmware available"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
msgctxt "@action:button"
msgid "How to update"
msgstr "Jak zaktualizować"

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
msgctxt "@action"
msgid "Update Firmware"
msgstr "Aktualizacja Oprogramowania Sprzętowego"

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
msgctxt "@item:inlistbox"
msgid "Compressed G-code File"
msgstr "Skompresowany Plik G-code"

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
msgctxt "@error:not supported"
msgid "GCodeGzWriter does not support text mode."
msgstr "Zapisywacz skompresowanego G-code nie obsługuje trybu tekstowego."

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
msgctxt "@item:inlistbox"
msgid "G-code File"
msgstr "Pliki G-code"

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:350
msgctxt "@info:status"
msgid "Parsing G-code"
msgstr "Analizowanie G-code"

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:352
#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:506
msgctxt "@info:title"
msgid "G-code Details"
msgstr "Szczegóły G-code"

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:504
msgctxt "@info:generic"
msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
msgstr "Przed wysłaniem pliku upewnij się, że G-code jest odpowiedni do konfiguracji drukarki. Przedstawienie G-kodu może nie być dokładne."

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
msgctxt "@item:inlistbox"
msgid "G File"
msgstr "Plik G-code"

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
msgctxt "@error:not supported"
msgid "GCodeWriter does not support non-text mode."
msgstr "Zapisywacz G-code nie obsługuje trybu nietekstowego."

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
msgctxt "@warning:status"
msgid "Please prepare G-code before exporting."
msgstr "Przygotuj G-code przed eksportem."

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
msgctxt "@item:inlistbox"
msgid "JPG Image"
msgstr "Obraz JPG"

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
msgctxt "@item:inlistbox"
msgid "JPEG Image"
msgstr "Obraz JPEG"

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
msgctxt "@item:inlistbox"
msgid "PNG Image"
msgstr "Obraz PNG"

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
msgctxt "@item:inlistbox"
msgid "BMP Image"
msgstr "Obraz BMP"

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
msgctxt "@item:inlistbox"
msgid "GIF Image"
msgstr "Obraz GIF"

#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
msgctxt "@item:inlistbox"
msgid "Cura 15.04 profiles"
msgstr "Profile Cura 15.04"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
msgctxt "@action"
msgid "Machine Settings"
msgstr "Ustawienia drukarki"

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/CloudPackageChecker.py:144
msgctxt "@info:generic"
msgid "Do you want to sync material and software packages with your account?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/CloudPackageChecker.py:145
#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/DownloadPresenter.py:95
msgctxt "@info:title"
msgid "Changes detected from your Ultimaker account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/CloudPackageChecker.py:147
msgctxt "@action:button"
msgid "Sync"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/DownloadPresenter.py:91
msgctxt "@info:generic"
msgid "Syncing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicenseModel.py:12
#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:79
msgctxt "@button"
msgid "Decline"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicenseModel.py:13
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
msgctxt "@button"
msgid "Agree"
msgstr "Zgadzam się"

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicenseModel.py:77
msgctxt "@title:window"
msgid "Plugin License Agreement"
msgstr "Akceptowanie Licencji Wtyczki"

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicensePresenter.py:42
msgctxt "@button"
msgid "Decline and remove from account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/RestartApplicationPresenter.py:22
msgctxt "@info:generic"
msgid "You need to quit and restart {} before changes have effect."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/SyncOrchestrator.py:79
msgctxt "@info:generic"
msgid "{} plugins failed to download"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:28
msgctxt "@label"
msgid "Installed Plugins"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:29
msgctxt "@label"
msgid "Installed Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:33
msgctxt "@label"
msgid "Bundled Plugins"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:34
msgctxt "@label"
msgid "Bundled Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/PackageModel.py:43
msgctxt "@label:property"
msgid "Unknown Package"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/PackageModel.py:66
msgctxt "@label:property"
msgid "Unknown Author"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/RemotePackageList.py:117
msgctxt "@info:error"
msgid "Could not interpret the server's response."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/RemotePackageList.py:148
msgctxt "@info:error"
msgid "Could not reach Marketplace."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
msgctxt "@item:inmenu"
msgid "Monitor"
msgstr "Monitor"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
msgctxt "@label"
msgid "Per Model Settings"
msgstr "Ustawienia każdego modelu osobno"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
msgctxt "@info:tooltip"
msgid "Configure Per Model Settings"
msgstr "Konfiguruj ustawienia każdego modelu z osobna"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
msgctxt "@item:inmenu"
msgid "Post Processing"
msgstr "Przetwarzanie końcowe"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
msgctxt "@item:inmenu"
msgid "Modify G-Code"
msgstr "Modyfikuj G-code"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
msgctxt "@item:inmenu"
msgid "Prepare"
msgstr "Przygotuj"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
msgctxt "@item:inmenu"
msgid "Preview"
msgstr "Podgląd"

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
msgctxt "@action:button Preceded by 'Ready to'."
msgid "Save to Removable Drive"
msgstr "Zapisz na dysk wymienny"

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
#, python-brace-format
msgctxt "@item:inlistbox"
msgid "Save to Removable Drive {0}"
msgstr "Zapisz na dysk wymienny {0}"

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
msgctxt "@info:status"
msgid "There are no file formats available to write with!"
msgstr "Nie ma żadnych formatów plików do zapisania!"

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
#, python-brace-format
msgctxt "@info:progress Don't translate the XML tags <filename>!"
msgid "Saving to Removable Drive <filename>{0}</filename>"
msgstr "Zapisywanie na Dysk Wymienny <filename>{0}</filename>"

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:110
msgctxt "@info:title"
msgid "Saving"
msgstr "Zapisywanie"

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:120
#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
msgstr "Nie mogę zapisać do <filename>{0}</filename>: <message>{1}</message>"

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
#, python-brace-format
msgctxt "@info:status Don't translate the tag {device}!"
msgid "Could not find a file name when trying to write to {device}."
msgstr "Nie mogę znaleźć nazwy pliku podczas próby zapisu do {device}."

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:152
#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:171
#, python-brace-format
msgctxt "@info:status"
msgid "Could not save to removable drive {0}: {1}"
msgstr "Nie można zapisać na wymiennym dysku {0}: {1}"

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:162
#, python-brace-format
msgctxt "@info:status"
msgid "Saved to Removable Drive {0} as {1}"
msgstr "Zapisano na dysk wymienny {0} jako {1}"

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
msgctxt "@info:title"
msgid "File Saved"
msgstr "Plik Zapisany"

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
msgctxt "@action:button"
msgid "Eject"
msgstr "Wyjmij"

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
#, python-brace-format
msgctxt "@action"
msgid "Eject removable device {0}"
msgstr "Wyjmij urządzenie wymienne {0}"

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:184
#, python-brace-format
msgctxt "@info:status"
msgid "Ejected {0}. You can now safely remove the drive."
msgstr "Wyjęto {0}. Możesz teraz bezpiecznie wyjąć dysk."

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:185
msgctxt "@info:title"
msgid "Safely Remove Hardware"
msgstr "Bezpiecznie Odłącz Urządzenie"

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:188
#, python-brace-format
msgctxt "@info:status"
msgid "Failed to eject {0}. Another program may be using the drive."
msgstr "Nie można wysunąć {0}. Inny program może używać dysku."

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
msgctxt "@item:intext"
msgid "Removable Drive"
msgstr "Dysk wymienny"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:129
msgctxt "@info:status"
msgid "Cura does not accurately display layers when Wire Printing is enabled."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:130
msgctxt "@info:title"
msgid "Simulation View"
msgstr "Widok symulacji"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:133
msgctxt "@info:status"
msgid "Nothing is shown because you need to slice first."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:134
msgctxt "@info:title"
msgid "No layers to show"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:136
#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:74
msgctxt "@info:option_text"
msgid "Do not show this message again"
msgstr "Nie pokazuj tego komunikatu ponownie"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
msgctxt "@item:inlistbox"
msgid "Layer view"
msgstr "Widok warstwy"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
msgctxt "@text"
msgid "Unable to read example data file."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:71
msgctxt "@info:status"
msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
msgctxt "@info:title"
msgid "Model Errors"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
msgctxt "@item:inmenu"
msgid "Solid view"
msgstr "Widok modelu"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
msgctxt "@label"
msgid "Support Blocker"
msgstr "Blokada Podpory"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
msgctxt "@info:tooltip"
msgid "Create a volume in which supports are not printed."
msgstr "Stwórz obszar, w którym podpory nie będą drukowane."

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
msgid "Open Compressed Triangle Mesh"
msgstr "Otwórz skompresowaną siatkę trójkątów"

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
msgctxt "@item:inlistbox"
msgid "COLLADA Digital Asset Exchange"
msgstr "Cyfrowa wymiana zasobów COLLADA"

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
msgctxt "@item:inlistbox"
msgid "glTF Binary"
msgstr "Biblioteka glTF"

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
msgctxt "@item:inlistbox"
msgid "glTF Embedded JSON"
msgstr "Załączony JSON glTF"

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
msgctxt "@item:inlistbox"
msgid "Stanford Triangle Format"
msgstr "Format trójkątów Stanforda"

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
msgctxt "@item:inlistbox"
msgid "Compressed COLLADA Digital Asset Exchange"
msgstr "Skompresowana cyfrowa wymiana zasobów COLLADA"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
msgctxt "@item:inlistbox"
msgid "Ultimaker Format Package"
msgstr "Pakiet Formatu Ultimaker"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:57
#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:72
#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:94
#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:149
#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:159
msgctxt "@info:error"
msgid "Can't write to UFP file:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
msgctxt "@action"
msgid "Level build plate"
msgstr "Wypoziomuj stół"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
msgctxt "@action"
msgid "Select upgrades"
msgstr "Wybierz aktualizacje"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
msgctxt "@action:button"
msgid "Print via cloud"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
msgctxt "@properties:tooltip"
msgid "Print via cloud"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
msgctxt "@info:status"
msgid "Connected via cloud"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
msgctxt "@action:button"
msgid "Monitor print"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
msgctxt "@action:tooltip"
msgid "Track the print in Ultimaker Digital Factory"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
#, python-brace-format
msgctxt "@error:send"
msgid "Unknown error code when uploading print job: {0}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
msgctxt "info:status"
msgid "New printer detected from your Ultimaker account"
msgid_plural "New printers detected from your Ultimaker account"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:242
#, python-brace-format
msgctxt "info:status Filled in with printer name and printer model."
msgid "Adding printer {name} ({model}) from your account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:261
#, python-brace-format
msgctxt "info:{0} gets replaced by a number of printers"
msgid "... and {0} other"
msgid_plural "... and {0} others"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:266
msgctxt "info:status"
msgid "Printers added from Digital Factory:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:334
msgctxt "info:status"
msgid "A cloud connection is not available for a printer"
msgid_plural "A cloud connection is not available for some printers"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:343
msgctxt "info:status"
msgid "This printer is not linked to the Digital Factory:"
msgid_plural "These printers are not linked to the Digital Factory:"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:348
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:440
msgctxt "info:name"
msgid "Ultimaker Digital Factory"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:352
#, python-brace-format
msgctxt "info:status"
msgid "To establish a connection, please visit the {website_link}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:356
msgctxt "@action:button"
msgid "Keep printer configurations"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:361
msgctxt "@action:button"
msgid "Remove printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:442
#, python-brace-format
msgctxt "@message {printer_name} is replaced with the name of the printer"
msgid "{printer_name} will be removed until the next account sync."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:443
#, python-brace-format
msgctxt "@message {printer_name} is replaced with the name of the printer"
msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:444
#, python-brace-format
msgctxt "@message {printer_name} is replaced with the name of the printer"
msgid "Are you sure you want to remove {printer_name} temporarily?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
msgctxt "@title:window"
msgid "Remove printers?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:484
#, python-brace-format
msgctxt "@label"
msgid ""
"You are about to remove {0} printer from Cura. This action cannot be undone.\n"
"Are you sure you want to continue?"
msgid_plural ""
"You are about to remove {0} printers from Cura. This action cannot be undone.\n"
"Are you sure you want to continue?"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:489
msgctxt "@label"
msgid ""
"You are about to remove all printers from Cura. This action cannot be undone.\n"
"Are you sure you want to continue?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
#, python-brace-format
msgctxt "@info:status"
msgid ""
"Your printer <b>{printer_name}</b> could be connected via cloud.\n"
" Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
msgctxt "@info:title"
msgid "Are you ready for cloud printing?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
msgctxt "@action"
msgid "Get started"
msgstr "Rozpocznij"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
msgctxt "@action"
msgid "Learn more"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
msgctxt "@info:status"
msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
msgstr "Próbujesz połączyć się z drukarką, na której nie działa Ultimaker Connect. Zaktualizuj drukarkę do najnowszej wersji firmware."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
msgctxt "@info:title"
msgid "Update your printer"
msgstr "Zaktualizuj swoją drukarkę"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
#, python-brace-format
msgctxt "@info:status"
msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
msgstr "Cura wykryła profile materiałów, które nie zostały jeszcze zainstalowane na gospodarzu grupy {0}."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
msgctxt "@info:title"
msgid "Sending materials to printer"
msgstr "Wysyłanie materiałów do drukarki"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
#, python-brace-format
msgctxt "@info:status"
msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
msgstr "Próbujesz połączyć się z {0}, ale nie jest to gospodarz grupy. Możesz odwiedzić stronę internetową, aby skonfigurować jako gospodarza."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
msgctxt "@info:title"
msgid "Not a group host"
msgstr "Nie jest gospodarzem grupy"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
msgctxt "@action"
msgid "Configure group"
msgstr "Konfiguruj grupę"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
msgctxt "@info:status"
msgid "Please wait until the current job has been sent."
msgstr "Poczekaj, aż bieżące zadanie zostanie wysłane."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
msgctxt "@info:title"
msgid "Print error"
msgstr "Błąd druku"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
msgctxt "@info:text"
msgid "Could not upload the data to the printer."
msgstr "Nie można wgrać danych do drukarki."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
msgctxt "@info:title"
msgid "Network error"
msgstr "Błąd sieci"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
msgctxt "@info:status"
msgid "Sending Print Job"
msgstr "Wysyłanie zadania druku"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
msgctxt "@info:status"
msgid "Uploading print job to printer."
msgstr "Przesyłanie zadania do drukarki."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
msgctxt "@info:status"
msgid "Print job queue is full. The printer can't accept a new job."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
msgctxt "@info:title"
msgid "Queue Full"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
msgctxt "@info:status"
msgid "Print job was successfully sent to the printer."
msgstr "Zadanie drukowania zostało pomyślnie wysłane do drukarki."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
msgctxt "@info:title"
msgid "Data Sent"
msgstr "Dane Wysłane"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
msgctxt "@action:button Preceded by 'Ready to'."
msgid "Print over network"
msgstr "Drukuj przez sieć"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
msgctxt "@properties:tooltip"
msgid "Print over network"
msgstr "Drukuj przez sieć"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
msgctxt "@info:status"
msgid "Connected over the network"
msgstr "Połączone przez sieć"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
msgctxt "@action"
msgid "Connect via Network"
msgstr "Połącz przez sieć"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
msgctxt "@info:status"
msgid "tomorrow"
msgstr "jutro"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
msgctxt "@info:status"
msgid "today"
msgstr "dziś"

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
msgctxt "@item:inmenu"
msgid "USB printing"
msgstr "Drukowanie USB"

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
msgctxt "@action:button Preceded by 'Ready to'."
msgid "Print via USB"
msgstr "Drukuj przez USB"

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
msgctxt "@info:tooltip"
msgid "Print via USB"
msgstr "Drukuj przez USB"

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
msgctxt "@info:status"
msgid "Connected via USB"
msgstr "Połączono przez USB"

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
msgctxt "@label"
msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
msgstr "Trwa drukowanie przez USB, zamknięcie Cura spowoduje jego zatrzymanie. Jesteś pewien?"

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
msgctxt "@message"
msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
msgstr "Nadal trwa drukowanie. Cura nie może rozpocząć kolejnego wydruku przez USB, dopóki poprzedni wydruk nie zostanie zakończony."

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
msgctxt "@message"
msgid "Print in Progress"
msgstr "Drukowanie w toku"

#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
msgctxt "@item:inlistbox"
msgid "X3D File"
msgstr "X3D Plik"

#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
msgctxt "@item:inlistbox"
msgid "X-Ray view"
msgstr "Widok X-Ray"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
msgctxt "@title:window"
msgid "Open Project"
msgstr "Otwórz projekt"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
msgctxt "@action:ComboBox Update/override existing profile"
msgid "Update existing"
msgstr "Zaktualizuj istniejące"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:64
msgctxt "@action:ComboBox Save settings in a new profile"
msgid "Create new"
msgstr "Utwórz nowy"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:82
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:59
msgctxt "@action:title"
msgid "Summary - Cura Project"
msgstr "Podsumowanie - Projekt Cura"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:108
msgctxt "@info:tooltip"
msgid "How should the conflict in the machine be resolved?"
msgstr "Jak powinny być rozwiązywane błędy w maszynie?"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:164
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:95
msgctxt "@action:label"
msgid "Printer settings"
msgstr "Ustawienia drukarki"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:175
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:104
msgctxt "@action:label"
msgid "Type"
msgstr "Typ"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:192
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:119
msgctxt "@action:label"
msgid "Printer Group"
msgstr "Grupa drukarek"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:217
msgctxt "@info:tooltip"
msgid "How should the conflict in the profile be resolved?"
msgstr "Jak powinien zostać rozwiązany problem z profilem?"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:220
msgctxt "@action:label"
msgid "Profile settings"
msgstr "Ustawienia profilu"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:250
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:375
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:119
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:244
msgctxt "@action:label"
msgid "Name"
msgstr "Nazwa"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:268
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:261
msgctxt "@action:label"
msgid "Intent"
msgstr "Cel"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:286
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:228
msgctxt "@action:label"
msgid "Not in profile"
msgstr "Nie w profilu"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:233
msgctxt "@action:label"
msgid "%1 override"
msgid_plural "%1 overrides"
msgstr[0] "%1 nadpisanie"
msgstr[1] "%1 Zastępuje"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:305
msgctxt "@action:label"
msgid "Derivative from"
msgstr "Pochodna z"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:311
msgctxt "@action:label"
msgid "%1, %2 override"
msgid_plural "%1, %2 overrides"
msgstr[0] "%1, %2 nadpisanie"
msgstr[1] "%1, %2 zastępuje"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:333
msgctxt "@info:tooltip"
msgid "How should the conflict in the material be resolved?"
msgstr "Jak powinien zostać rozwiązany problem z materiałem?"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:360
msgctxt "@action:label"
msgid "Material settings"
msgstr "Ustawienia materiału"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:396
msgctxt "@action:label"
msgid "Setting visibility"
msgstr "Ustawienie widoczności"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:405
msgctxt "@action:label"
msgid "Mode"
msgstr "Tryb"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:421
msgctxt "@action:label"
msgid "Visible settings:"
msgstr "Widoczne ustawienie:"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:426
msgctxt "@action:label"
msgid "%1 out of %2"
msgstr "%1 poza %2"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:447
msgctxt "@action:warning"
msgid "Loading a project will clear all models on the build plate."
msgstr "Ładowanie projektu usunie wszystkie modele z platformy roboczej."

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:514
msgctxt "@action:button"
msgid "Open"
msgstr "Otwórz"

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:520
msgctxt "@action:button"
msgid "Open project anyway"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:529
msgctxt "@action:button"
msgid "Install missing material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
msgctxt "@button"
msgid "Want more?"
msgstr "Chcesz więcej?"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
msgctxt "@button"
msgid "Backup Now"
msgstr "Utwórz kopię zapasową"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
msgctxt "@checkbox:description"
msgid "Auto Backup"
msgstr "Automatyczne tworzenie kopii zapasowej"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
msgctxt "@checkbox:description"
msgid "Automatically create a backup each day that Cura is started."
msgstr "Automatycznie twórz kopie zapasowe każdego dnia, w którym uruchomiono Curę."

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
msgctxt "@button"
msgid "Restore"
msgstr "Przywróć"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
msgctxt "@dialog:title"
msgid "Delete Backup"
msgstr "Usuń kopię zapasową"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
msgctxt "@dialog:info"
msgid "Are you sure you want to delete this backup? This cannot be undone."
msgstr "Czy na pewno chcesz usunąć tę kopię zapasową? Tej czynności nie można cofnąć."

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
msgctxt "@dialog:title"
msgid "Restore Backup"
msgstr "Przywróć kopię zapasową"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
msgctxt "@dialog:info"
msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
msgstr "Musisz zrestartować Curę przed przywróceniem kopii zapasowej. Czy chcesz teraz zamknąć Curę?"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
msgctxt "@backuplist:label"
msgid "Cura Version"
msgstr "Wersja Cura"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
msgctxt "@backuplist:label"
msgid "Machines"
msgstr "Drukarki"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
msgctxt "@backuplist:label"
msgid "Materials"
msgstr "Materiały"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
msgctxt "@backuplist:label"
msgid "Profiles"
msgstr "Profile"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
msgctxt "@backuplist:label"
msgid "Plugins"
msgstr "Pluginy"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
msgctxt "@title:window"
msgid "Cura Backups"
msgstr "Kopie zapasowe cura"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
msgctxt "@title"
msgid "My Backups"
msgstr "Moje Kopie Zapasowe"

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:36
msgctxt "@empty_state"
msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
msgstr "Nie masz żadnych kopii zapasowych. Użyj przycisku „Utwórz kopię zapasową”, aby go utworzyć."

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:55
msgctxt "@backup_limit_info"
msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
msgstr "Podczas fazy podglądu będziesz ograniczony do 5 widocznych kopii zapasowych. Usuń kopię zapasową, aby zobaczyć starsze."

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
msgctxt "@description"
msgid "Backup and synchronize your Cura settings."
msgstr "Wykonaj kopię zapasową i zsynchronizuj ustawienia Cura."

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:49
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:164
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:212
msgctxt "@button"
msgid "Sign in"
msgstr "Zaloguj"

#: /home/trin/Gedeeld/Projects/Cura/plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:216
msgctxt "@option"
msgid "Save Cura project and print file"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:217
msgctxt "@option"
msgid "Save Cura project"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
msgctxt "@title"
msgid "Update Firmware"
msgstr "Aktualizacja Oprogramowania Sprzętowego"

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
msgctxt "@label"
msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
msgstr "Oprogramowanie ukłądowe jest częścią oprogramowania działającego bezpośrednio na drukarce 3D. Oprogramowanie to steruje silnikami krokowymi, reguluje temperaturę i ostatecznie sprawia, że drukarka działa."

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
msgctxt "@label"
msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
msgstr "Oprogramowanie ukłądowe dostarczane z nowymi drukarkami działa, ale nowe wersje mają zazwyczaj więcej funkcji i ulepszeń."

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
msgctxt "@action:button"
msgid "Automatically upgrade Firmware"
msgstr "Automatycznie uaktualnij oprogramowanie"

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
msgctxt "@action:button"
msgid "Upload custom Firmware"
msgstr "Prześlij niestandardowe oprogramowanie"

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
msgctxt "@label"
msgid "Firmware can not be updated because there is no connection with the printer."
msgstr "Oprogramowanie sprzętowe nie może być zaktualizowane, ponieważ nie ma połączenia z drukarką."

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
msgctxt "@label"
msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
msgstr "Oprogramowanie sprzętowe nie może być zaktualizowane, ponieważ połączenie z drukarką nie wspiera usługi."

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
msgctxt "@title:window"
msgid "Select custom firmware"
msgstr "Wybierz niestandardowe oprogramowanie"

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:113
msgctxt "@title:window"
msgid "Firmware Update"
msgstr "Aktualizacja oprogramowania układowego"

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:137
msgctxt "@label"
msgid "Updating firmware."
msgstr "Aktualizowanie oprogramowania."

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:139
msgctxt "@label"
msgid "Firmware update completed."
msgstr "Aktualizacja oprogramowania zakończona."

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:141
msgctxt "@label"
msgid "Firmware update failed due to an unknown error."
msgstr "Aktualizacja oprogramowania nie powiodła się z powodu nieznanego błędu."

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
msgctxt "@label"
msgid "Firmware update failed due to an communication error."
msgstr "Aktualizacja oprogramowania nie powiodła się z powodu błędu komunikacji."

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
msgctxt "@label"
msgid "Firmware update failed due to an input/output error."
msgstr "Aktualizacja oprogramowania nie powiodła się z powodu błędu wejścia / wyjścia."

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
msgctxt "@label"
msgid "Firmware update failed due to missing firmware."
msgstr "Aktualizacja oprogramowania nie powiodła się z powodu utraconego oprogramowania."

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:14
msgctxt "@title:window"
msgid "Convert Image"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
msgctxt "@action:label"
msgid "Height (mm)"
msgstr "Wysokość (mm)"

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
msgctxt "@info:tooltip"
msgid "The maximum distance of each pixel from \"Base.\""
msgstr "Maksymalna odległość każdego piksela od \"Bazy.\""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:66
msgctxt "@action:label"
msgid "Base (mm)"
msgstr "Baza (mm)"

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:90
msgctxt "@info:tooltip"
msgid "The base height from the build plate in millimeters."
msgstr "Wysokość podstawy od stołu w milimetrach."

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:100
msgctxt "@action:label"
msgid "Width (mm)"
msgstr "Szerokość (mm)"

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:124
msgctxt "@info:tooltip"
msgid "The width in millimeters on the build plate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:134
msgctxt "@action:label"
msgid "Depth (mm)"
msgstr "Głębokość (mm)"

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:158
msgctxt "@info:tooltip"
msgid "The depth in millimeters on the build plate"
msgstr "Głębokość w milimetrach na stole"

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:187
msgctxt "@item:inlistbox"
msgid "Darker is higher"
msgstr "Ciemniejsze jest wyższe"

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:188
msgctxt "@item:inlistbox"
msgid "Lighter is higher"
msgstr "Jaśniejszy jest wyższy"

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
msgctxt "@info:tooltip"
msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
msgstr "Dla litofanów ciemne piksele powinny odpowiadać grubszym miejscom, aby zablokować więcej światła. Dla zaznaczenia wysokości map, jaśniejsze piksele oznaczają wyższy teren, więc jaśniejsze piksele powinny odpowiadać wyższym położeniom w wygenerowanym modelu 3D."

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:205
msgctxt "@action:label"
msgid "Color Model"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:224
msgctxt "@item:inlistbox"
msgid "Linear"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:225
msgctxt "@item:inlistbox"
msgid "Translucency"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:232
msgctxt "@info:tooltip"
msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:242
msgctxt "@action:label"
msgid "1mm Transmittance (%)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:263
msgctxt "@info:tooltip"
msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:274
msgctxt "@action:label"
msgid "Smoothing"
msgstr "Wygładzanie"

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:298
msgctxt "@info:tooltip"
msgid "The amount of smoothing to apply to the image."
msgstr "Ilość wygładzania do zastosowania do obrazu."

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:329
#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:136
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ColorDialog.qml:143
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:80
msgctxt "@action:button"
msgid "OK"
msgstr "OK"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
msgctxt "@title:tab"
msgid "Printer"
msgstr "Drukarka"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
msgctxt "@title:label"
msgid "Nozzle Settings"
msgstr "Ustawienia dyszy"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:74
msgctxt "@label"
msgid "Nozzle size"
msgstr "Rozmiar dyszy"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:78
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:92
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:108
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:123
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:72
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:87
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:102
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
msgctxt "@label"
msgid "mm"
msgstr "mm"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:88
msgctxt "@label"
msgid "Compatible material diameter"
msgstr "Kompatybilna średnica materiału"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:104
msgctxt "@label"
msgid "Nozzle offset X"
msgstr "Korekcja dyszy X"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:119
msgctxt "@label"
msgid "Nozzle offset Y"
msgstr "Korekcja dyszy Y"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:134
msgctxt "@label"
msgid "Cooling Fan Number"
msgstr "Numer Wentylatora"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
msgctxt "@title:label"
msgid "Extruder Start G-code"
msgstr "Początkowy G-code ekstrudera"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
msgctxt "@title:label"
msgid "Extruder End G-code"
msgstr "Końcowy G-code ekstrudera"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
msgctxt "@title:label"
msgid "Printer Settings"
msgstr "Ustawienia drukarki"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:68
msgctxt "@label"
msgid "X (Width)"
msgstr "X (Szerokość)"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:83
msgctxt "@label"
msgid "Y (Depth)"
msgstr "Y (Głębokość)"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:98
msgctxt "@label"
msgid "Z (Height)"
msgstr "Z (Wysokość)"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:112
msgctxt "@label"
msgid "Build plate shape"
msgstr "Kształt stołu roboczego"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:125
msgctxt "@label"
msgid "Origin at center"
msgstr "Początek na środku"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:137
msgctxt "@label"
msgid "Heated bed"
msgstr "Podgrzewany stół"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:149
msgctxt "@label"
msgid "Heated build volume"
msgstr "Grzany obszar roboczy"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:161
msgctxt "@label"
msgid "G-code flavor"
msgstr "Wersja G-code"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:185
msgctxt "@title:label"
msgid "Printhead Settings"
msgstr "Ustawienia głowicy"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:197
msgctxt "@label"
msgid "X min"
msgstr "X min"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:217
msgctxt "@label"
msgid "Y min"
msgstr "Y min"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:237
msgctxt "@label"
msgid "X max"
msgstr "X max"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:257
msgctxt "@label"
msgid "Y max"
msgstr "Y max"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:275
msgctxt "@label"
msgid "Gantry Height"
msgstr "Wysokość wózka"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:289
msgctxt "@label"
msgid "Number of Extruders"
msgstr "Liczba ekstruderów"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:341
msgctxt "@label"
msgid "Apply Extruder offsets to GCode"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:389
msgctxt "@title:label"
msgid "Start G-code"
msgstr "Początkowy G-code"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:400
msgctxt "@title:label"
msgid "End G-code"
msgstr "Końcowy G-code"

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:15
msgctxt "@title"
msgid "Changes from your account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24
msgctxt "@button"
msgid "Dismiss"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:118
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:76
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:175
msgctxt "@button"
msgid "Next"
msgstr "Dalej"

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:52
msgctxt "@label"
msgid "The following packages will be added:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:94
msgctxt "@label"
msgid "The following packages can not be installed because of an incompatible Cura version:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/InstallMissingPackagesDialog.qml:15
msgctxt "@title"
msgid "Install missing Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:15
msgctxt "@button"
msgid "Plugin license agreement"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:47
msgctxt "@text"
msgid "Please read and agree with the plugin licence."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:70
msgctxt "@button"
msgid "Accept"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
msgctxt "@header"
msgid "Manage packages"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
msgctxt "@text"
msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
msgctxt "@info:tooltip"
msgid "Manage packages"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:87
msgctxt "@title"
msgid "Loading..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:148
msgctxt "@button"
msgid "Plugins"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:156
msgctxt "@button"
msgid "Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:193
msgctxt "@info"
msgid "Search in the browser"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:271
msgctxt "@button"
msgid "In order to use the package you will need to restart Cura"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:279
msgctxt "@info:button, %1 is the application name"
msgid "Quit %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/MissingPackages.qml:8
msgctxt "@header"
msgid "Install Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
msgctxt "@text"
msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/MultipleLicenseDialog.qml:35
msgctxt "@label"
msgid "You need to accept the license to install the package"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/OnboardBanner.qml:101
#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:207
msgctxt "@button:label"
msgid "Learn More"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:172
msgctxt "@label Is followed by the name of an author"
msgid "By"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:226
msgctxt "@button"
msgid "Enable"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:226
msgctxt "@button"
msgid "Disable"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:244
msgctxt "@button"
msgid "Downgrading..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:245
msgctxt "@button"
msgid "Downgrade"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:249
msgctxt "@button"
msgid "Installing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:250
msgctxt "@button"
msgid "Install"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:254
msgctxt "@button"
msgid "Uninstall"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:269
msgctxt "@button"
msgid "Updating..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:269
msgctxt "@button"
msgid "Update"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
msgctxt "@header"
msgid "Package details"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
msgctxt "@button:tooltip"
msgid "Back"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:81
msgctxt "@header"
msgid "Description"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:110
msgctxt "@header"
msgid "Compatible printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:134
msgctxt "@info"
msgid "No compatibility information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:152
msgctxt "@header"
msgid "Compatible support materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:176
msgctxt "@info No materials"
msgid "None"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:193
msgctxt "@header"
msgid "Compatible with Material Station"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:202
#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:228
msgctxt "@info"
msgid "Yes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:202
#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:228
msgctxt "@info"
msgid "No"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:219
msgctxt "@header"
msgid "Optimized for Air Manager"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:243
msgctxt "@button"
msgid "Visit plug-in website"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:243
msgctxt "@button"
msgid "Website"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:252
msgctxt "@button"
msgid "Buy spool"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:261
msgctxt "@button"
msgid "Safety datasheet"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:270
msgctxt "@button"
msgid "Technical datasheet"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:151
msgctxt "@button"
msgid "Failed to load packages:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:151
msgctxt "@button"
msgid "Retry?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:167
msgctxt "@button"
msgid "Loading"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:183
msgctxt "@message"
msgid "No more results to load"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:183
msgctxt "@message"
msgid "No results found with current filter"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:226
msgctxt "@button"
msgid "Load more"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
msgctxt "@header"
msgid "Install Plugins"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
msgctxt "@text"
msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
msgctxt "@info"
msgid "Ultimaker Verified Plug-in"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
msgctxt "@info"
msgid "Ultimaker Certified Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
msgctxt "@info"
msgid "Ultimaker Verified Package"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
msgctxt "@info"
msgid ""
"Please make sure your printer has a connection:\n"
"- Check if the printer is turned on.\n"
"- Check if the printer is connected to the network.\n"
"- Check if you are signed in to discover cloud-connected printers."
msgstr ""
"Upewnij się, że drukarka ma połączenie:\n"
"- Sprawdź, czy drukarka jest włączona.\n"
"- Sprawdź, czy drukarka jest podłączona do sieci.\n"
"- Sprawdź, czy jesteś zalogowany, aby znaleźć drukarki podłączone do chmury."

#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:113
msgctxt "@info"
msgid "Please connect your printer to the network."
msgstr "Podłącz drukarkę do sieci."

#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:147
msgctxt "@label link to technical assistance"
msgid "View user manuals online"
msgstr "Pokaż instrukcję użytkownika online"

#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:163
msgctxt "@info"
msgid "In order to monitor your print from Cura, please connect the printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
msgctxt "@label"
msgid "Mesh Type"
msgstr "Typ siatki"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
msgctxt "@label"
msgid "Normal model"
msgstr "Normalny model"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
msgctxt "@label"
msgid "Print as support"
msgstr "Drukuj jako podpora"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
msgctxt "@label"
msgid "Modify settings for overlaps"
msgstr "Modyfikuj ustawienia nakładania"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
msgctxt "@label"
msgid "Don't support overlaps"
msgstr "Nie wspieraj nałożenia"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
msgctxt "@item:inlistbox"
msgid "Infill mesh only"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
msgctxt "@item:inlistbox"
msgid "Cutting mesh"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
msgctxt "@action:button"
msgid "Select settings"
msgstr "Wybierz ustawienia"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
msgctxt "@title:window"
msgid "Select Settings to Customize for this model"
msgstr "Wybierz Ustawienia, aby dostosować ten model"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:102
msgctxt "@label:textbox"
msgid "Filter..."
msgstr "Filtr..."

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
msgctxt "@label:checkbox"
msgid "Show all"
msgstr "Pokaż wszystko"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
msgctxt "@title:window"
msgid "Post Processing Plugin"
msgstr "Plugin post-processingu"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
msgctxt "@label"
msgid "Post Processing Scripts"
msgstr "Skrypty post-processingu"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:215
msgctxt "@action"
msgid "Add a script"
msgstr "Dodaj skrypt"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:251
msgctxt "@label"
msgid "Settings"
msgstr "Ustawienia"

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:459
msgctxt "@info:tooltip"
msgid "Change active post-processing scripts."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:463
msgctxt "@info:tooltip"
msgid "The following script is active:"
msgid_plural "The following scripts are active:"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:18
#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:47
msgctxt "@label"
msgid "Color scheme"
msgstr "Schemat kolorów"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:104
msgctxt "@label:listbox"
msgid "Material Color"
msgstr "Kolor materiału"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:108
msgctxt "@label:listbox"
msgid "Line Type"
msgstr "Rodzaj linii"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:112
msgctxt "@label:listbox"
msgid "Speed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:116
msgctxt "@label:listbox"
msgid "Layer Thickness"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:120
msgctxt "@label:listbox"
msgid "Line Width"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:124
msgctxt "@label:listbox"
msgid "Flow"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:164
msgctxt "@label"
msgid "Compatibility Mode"
msgstr "Tryb zgodności"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:231
msgctxt "@label"
msgid "Travels"
msgstr "Ruchy"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
msgctxt "@label"
msgid "Helpers"
msgstr "Pomoce"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
msgctxt "@label"
msgid "Shell"
msgstr "Obrys"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
msgctxt "@label"
msgid "Infill"
msgstr "Wypełnienie"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
msgctxt "@label"
msgid "Starts"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:304
msgctxt "@label"
msgid "Only Show Top Layers"
msgstr "Pokaż tylko najwyższe warstwy"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:313
msgctxt "@label"
msgid "Show 5 Detailed Layers On Top"
msgstr "Pokaż 5 Szczegółowych Warstw"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
msgctxt "@label"
msgid "Top / Bottom"
msgstr "Góra/ Dół"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:330
msgctxt "@label"
msgid "Inner Wall"
msgstr "Wewnętrzna ściana"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:397
msgctxt "@label"
msgid "min"
msgstr "min"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:462
msgctxt "@label"
msgid "max"
msgstr "max"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:16
msgctxt "@title:window"
msgid "More information on anonymous data collection"
msgstr "Wiećej informacji o zbieraniu anonimowych danych"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:73
msgctxt "@text:window"
msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkowania. Poniżej znajduje się przykład wszystkich udostępnianych danych:"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:107
msgctxt "@text:window"
msgid "I don't want to send anonymous data"
msgstr "Nie chcę wysyłać anonimowych danych"

#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:116
msgctxt "@text:window"
msgid "Allow sending anonymous data"
msgstr "Pozwól na wysyłanie anonimowych danych"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
msgctxt "@title"
msgid "Build Plate Leveling"
msgstr "Poziomowanie stołu"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:42
msgctxt "@label"
msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
msgstr "Aby upewnić się, że wydruki będą wychodziły świetne, możesz teraz wyregulować stół. Po kliknięciu przycisku \"Przejdź do następnego położenia\" dysza będzie się poruszać do różnych pozycji, które można wyregulować."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:52
msgctxt "@label"
msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
msgstr "Dla każdej pozycji; Włóż kartkę papieru pod dyszę i wyreguluj wysokość stołu roboczego. Wysokość stołu jest prawidłowa, gdy papier stawia lekki opór."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:67
msgctxt "@action:button"
msgid "Start Build Plate Leveling"
msgstr "Rozpocznij poziomowanie stołu roboczego"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:79
msgctxt "@action:button"
msgid "Move to Next Position"
msgstr "Przejdź do następnego położenia"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
msgctxt "@label"
msgid "Please select any upgrades made to this Ultimaker Original"
msgstr "Proszę wybrać ulepszenia wykonane w tym Ultimaker Original"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:39
msgctxt "@label"
msgid "Heated Build Plate (official kit or self-built)"
msgstr "Płyta grzewcza (zestaw oficjalny lub własnej roboty)"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
msgctxt "@title:window"
msgid "Connect to Networked Printer"
msgstr "Połącz się z drukarką sieciową"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
msgctxt "@label"
msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
msgstr "Aby drukować bezpośrednio na drukarce przez sieć, upewnij się, że drukarka jest podłączona do sieci za pomocą kabla sieciowego lub do sieci WIFI. Jeśli nie podłączysz Cury do drukarki, możesz nadal używać napędu USB do przesyłania plików G-Code do drukarki."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
msgctxt "@label"
msgid "Select your printer from the list below:"
msgstr "Wybierz swoją drukarkę z poniższej listy:"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
msgctxt "@action:button"
msgid "Edit"
msgstr "Edycja"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:140
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:321
msgctxt "@action:button"
msgid "Remove"
msgstr "Usunąć"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
msgctxt "@action:button"
msgid "Refresh"
msgstr "Odśwież"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
msgctxt "@label"
msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
msgstr "Jeżeli twojej drukarki nie ma na liście, przeczytaj <a href='%1'>poradnik o problemach z drukowaniem przez sieć</a>"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:247
msgctxt "@label"
msgid "Type"
msgstr "Rodzaj"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:256
msgctxt "@label"
msgid "Firmware version"
msgstr "Wersja oprogramowania"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:266
msgctxt "@label"
msgid "Address"
msgstr "Adres"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
msgctxt "@label"
msgid "This printer is not set up to host a group of printers."
msgstr "Ta drukarka nie jest skonfigurowana jako host dla grupy drukarek."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
msgctxt "@label"
msgid "This printer is the host for a group of %1 printers."
msgstr "Ta drukarka jest hostem grupy %1 drukarek."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
msgctxt "@label"
msgid "The printer at this address has not yet responded."
msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
msgctxt "@action:button"
msgid "Connect"
msgstr "Połącz"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
msgctxt "@title:window"
msgid "Invalid IP address"
msgstr "Nieprawidłowy adres IP"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:141
msgctxt "@text"
msgid "Please enter a valid IP address."
msgstr "Proszę podać poprawny adres IP."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
msgctxt "@title:window"
msgid "Printer Address"
msgstr "Adres drukarki"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:97
msgctxt "@label"
msgid "Enter the IP address of your printer on the network."
msgstr "Wprowadź adres IP drukarki."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
msgctxt "@title:window"
msgid "Configuration Changes"
msgstr "Zmiany konfiguracji"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
msgctxt "@action:button"
msgid "Override"
msgstr "Nadpisz"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
msgctxt "@label"
msgid "The assigned printer, %1, requires the following configuration change:"
msgid_plural "The assigned printer, %1, requires the following configuration changes:"
msgstr[0] "Przypisana drukarka, %1, wymaga następującej zmiany konfiguracji:"
msgstr[1] "Przypisana drukarka, %1, wymaga następujących zmian konfiguracji:"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
msgctxt "@label"
msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
msgstr "Drukarka %1 jest przypisana, ale zadanie zawiera nieznaną konfigurację materiału."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
msgctxt "@label"
msgid "Change material %1 from %2 to %3."
msgstr "Zmień materiał %1 z %2 na %3."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
msgctxt "@label"
msgid "Load %3 as material %1 (This cannot be overridden)."
msgstr "Załaduj %3 jako materiał %1 (Nie można nadpisać)."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
msgctxt "@label"
msgid "Change print core %1 from %2 to %3."
msgstr "Zmień rdzeń drukujący %1 z %2 na %3."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
msgctxt "@label"
msgid "Change build plate to %1 (This cannot be overridden)."
msgstr "Zmień stół na %1 (Nie można nadpisać)."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
msgctxt "@label"
msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
msgstr "Nadpisanie spowoduje użycie określonych ustawień w istniejącej konfiguracji drukarki. Może to spowodować niepowodzenie druku."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
msgctxt "@label"
msgid "Glass"
msgstr "Szkło"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
msgctxt "@label"
msgid "Aluminum"
msgstr "Aluminum"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
msgctxt "@label"
msgid "Move to top"
msgstr "Przesuń na początek"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
msgctxt "@label"
msgid "Delete"
msgstr "Usuń"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
msgctxt "@label"
msgid "Resume"
msgstr "Ponów"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
msgctxt "@label"
msgid "Pausing..."
msgstr "Zatrzymywanie..."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
msgctxt "@label"
msgid "Resuming..."
msgstr "Przywracanie..."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:279
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:288
msgctxt "@label"
msgid "Pause"
msgstr "Wstrzymaj"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
msgctxt "@label"
msgid "Aborting..."
msgstr "Przerywanie..."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
msgctxt "@label"
msgid "Abort"
msgstr "Anuluj"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
msgctxt "@label %1 is the name of a print job."
msgid "Are you sure you want to move %1 to the top of the queue?"
msgstr "Czy jesteś pewien, że chcesz przesunąć %1 na początek kolejki?"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
msgctxt "@window:title"
msgid "Move print job to top"
msgstr "Przesuń zadanie drukowania na początek"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
msgctxt "@label %1 is the name of a print job."
msgid "Are you sure you want to delete %1?"
msgstr "Czy jesteś pewien, że chcesz usunąć %1?"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
msgctxt "@window:title"
msgid "Delete print job"
msgstr "Usuń zadanie drukowania"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
msgctxt "@label %1 is the name of a print job."
msgid "Are you sure you want to abort %1?"
msgstr "Czy jesteś pewien, że chcesz anulować %1?"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:326
msgctxt "@window:title"
msgid "Abort print"
msgstr "Anuluj wydruk"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
msgctxt "@label link to Connect and Cloud interfaces"
msgid "Manage printer"
msgstr "Zarządzaj drukarkami"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
msgctxt "@info"
msgid "Please update your printer's firmware to manage the queue remotely."
msgstr "Zaktualizuj oprogramowanie drukarki, aby zdalnie zarządzać kolejką."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
msgctxt "@info"
msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
msgctxt "@label:status"
msgid "Loading..."
msgstr "Wczytywanie..."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
msgctxt "@label:status"
msgid "Unavailable"
msgstr "Niedostępne"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
msgctxt "@label:status"
msgid "Unreachable"
msgstr "Nieosiągalna"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
msgctxt "@label:status"
msgid "Idle"
msgstr "Zajęta"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
msgctxt "@label:status"
msgid "Preparing..."
msgstr "Przygotowyję..."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
msgctxt "@label:status"
msgid "Printing"
msgstr "Drukowanie"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
msgctxt "@label"
msgid "Untitled"
msgstr "Bez tytułu"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
msgctxt "@label"
msgid "Anonymous"
msgstr "Anonimowa"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
msgctxt "@label:status"
msgid "Requires configuration changes"
msgstr "Wymaga zmian konfiguracji"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
msgctxt "@action:button"
msgid "Details"
msgstr "Szczegóły"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
msgctxt "@label"
msgid "Unavailable printer"
msgstr "Drukarka niedostępna"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
msgctxt "@label"
msgid "First available"
msgstr "Pierwsza dostępna"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
msgctxt "@label:status"
msgid "Aborted"
msgstr "Anulowano"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
msgctxt "@label:status"
msgid "Finished"
msgstr "Zakończono"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
msgctxt "@label:status"
msgid "Aborting..."
msgstr "Przerywanie..."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
msgctxt "@label:status"
msgid "Failed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
msgctxt "@label:status"
msgid "Pausing..."
msgstr "Zatrzymywanie..."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
msgctxt "@label:status"
msgid "Paused"
msgstr "Wstrzymana"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
msgctxt "@label:status"
msgid "Resuming..."
msgstr "Przywracanie..."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
msgctxt "@label:status"
msgid "Action required"
msgstr "Konieczne są działania"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
msgctxt "@label:status"
msgid "Finishes %1 at %2"
msgstr "Zakończone %1 z %2"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
msgctxt "@label"
msgid "Queued"
msgstr "W kolejce"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
msgctxt "@label link to connect manager"
msgid "Manage in browser"
msgstr "Zarządzaj w przeglądarce"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
msgctxt "@label"
msgid "There are no print jobs in the queue. Slice and send a job to add one."
msgstr "W kolejce nie ma zadań drukowania. Potnij i wyślij zadanie, aby dodać."

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
msgctxt "@label"
msgid "Print jobs"
msgstr "Zadania druku"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
msgctxt "@label"
msgid "Total print time"
msgstr "Łączny czas druku"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
msgctxt "@label"
msgid "Waiting for"
msgstr "Oczekiwanie na"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
msgctxt "@title:window"
msgid "Print over network"
msgstr "Drukuj przez sieć"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
msgctxt "@action:button"
msgid "Print"
msgstr "Drukuj"

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
msgctxt "@label"
msgid "Printer selection"
msgstr "Wybór drukarki"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
msgctxt "@action:button"
msgid "Sign in"
msgstr "Zaloguj"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:19
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:64
msgctxt "@label"
msgid "Sign in to the Ultimaker platform"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:39
msgctxt "@text"
msgid ""
"- Add material profiles and plug-ins from the Marketplace\n"
"- Back-up and sync your material profiles and plug-ins\n"
"- Share ideas and get help from 48,000+ users in the Ultimaker community"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:58
msgctxt "@button"
msgid "Create a free Ultimaker account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
msgctxt "@label"
msgid "Checking..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
msgctxt "@label"
msgid "Account synced"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:49
msgctxt "@label"
msgid "Something went wrong..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:102
msgctxt "@button"
msgid "Install pending updates"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:123
msgctxt "@button"
msgid "Check for account updates"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:78
msgctxt "@label The argument is a timestamp"
msgid "Last update: %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:107
msgctxt "@button"
msgid "Ultimaker Account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:126
msgctxt "@button"
msgid "Sign Out"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
msgctxt "@label"
msgid "No time estimation available"
msgstr "Szacunkowy czas niedostępny"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
msgctxt "@label"
msgid "No cost estimation available"
msgstr "Szacunkowy koszt niedostępny"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
msgctxt "@button"
msgid "Preview"
msgstr "Podgląd"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
msgctxt "@label"
msgid "Time estimation"
msgstr "Szacunkowy czas"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:107
msgctxt "@label"
msgid "Material estimation"
msgstr "Szacunkowy materiał"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:156
msgctxt "@label m for meter"
msgid "%1m"
msgstr "%1m"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:157
msgctxt "@label g for grams"
msgid "%1g"
msgstr "%1g"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
msgctxt "@label:PrintjobStatus"
msgid "Slicing..."
msgstr "Cięcie..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:78
msgctxt "@label:PrintjobStatus"
msgid "Unable to slice"
msgstr "Nie można pociąć"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:114
msgctxt "@button"
msgid "Processing"
msgstr "Przetwarzanie"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:114
msgctxt "@button"
msgid "Slice"
msgstr "Potnij"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:115
msgctxt "@label"
msgid "Start the slicing process"
msgstr "Rozpocznij proces cięcia"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:132
msgctxt "@button"
msgid "Cancel"
msgstr "Anuluj"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:81
msgctxt "@action:inmenu"
msgid "Show Online Troubleshooting"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:88
msgctxt "@action:inmenu"
msgid "Toggle Full Screen"
msgstr "Przełącz tryb pełnoekranowy"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:96
msgctxt "@action:inmenu"
msgid "Exit Full Screen"
msgstr "Wyłącz tryb pełnoekranowy"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:103
msgctxt "@action:inmenu menubar:edit"
msgid "&Undo"
msgstr "&Cofnij"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:113
msgctxt "@action:inmenu menubar:edit"
msgid "&Redo"
msgstr "&Ponów"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:131
msgctxt "@action:inmenu menubar:file"
msgid "&Quit"
msgstr "&Zamknij"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
msgctxt "@action:inmenu menubar:view"
msgid "3D View"
msgstr "Widok 3D"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
msgctxt "@action:inmenu menubar:view"
msgid "Front View"
msgstr "Widok z przodu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
msgctxt "@action:inmenu menubar:view"
msgid "Top View"
msgstr "Widok z góry"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
msgctxt "@action:inmenu menubar:view"
msgid "Bottom View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
msgctxt "@action:inmenu menubar:view"
msgid "Left Side View"
msgstr "Widok z lewej strony"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
msgctxt "@action:inmenu menubar:view"
msgid "Right Side View"
msgstr "Widok z prawej strony"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:188
msgctxt "@action:inmenu"
msgid "Configure Cura..."
msgstr "Konfiguruj Cura..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
msgctxt "@action:inmenu menubar:printer"
msgid "&Add Printer..."
msgstr "&Dodaj drukarkę..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:201
msgctxt "@action:inmenu menubar:printer"
msgid "Manage Pr&inters..."
msgstr "Zarządzaj drukarkami..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:208
msgctxt "@action:inmenu"
msgid "Manage Materials..."
msgstr "Zarządzaj materiałami..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:216
msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
msgid "Add more materials from Marketplace"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:223
msgctxt "@action:inmenu menubar:profile"
msgid "&Update profile with current settings/overrides"
msgstr "&Aktualizuj profil z bieżącymi ustawieniami"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:231
msgctxt "@action:inmenu menubar:profile"
msgid "&Discard current changes"
msgstr "&Odrzuć bieżące zmiany"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:243
msgctxt "@action:inmenu menubar:profile"
msgid "&Create profile from current settings/overrides..."
msgstr "&Utwórz profil z bieżących ustawień..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:249
msgctxt "@action:inmenu menubar:profile"
msgid "Manage Profiles..."
msgstr "Zarządzaj profilami..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:257
msgctxt "@action:inmenu menubar:help"
msgid "Show Online &Documentation"
msgstr "Pokaż dokumentację internetową"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
msgctxt "@action:inmenu menubar:help"
msgid "Report a &Bug"
msgstr "Zgłoś błąd"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:273
msgctxt "@action:inmenu menubar:help"
msgid "What's New"
msgstr "Co nowego"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:287
msgctxt "@action:inmenu menubar:help"
msgid "About..."
msgstr "O..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:294
msgctxt "@action:inmenu menubar:edit"
msgid "Delete Selected"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:304
msgctxt "@action:inmenu menubar:edit"
msgid "Center Selected"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:313
msgctxt "@action:inmenu menubar:edit"
msgid "Multiply Selected"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:322
msgctxt "@action:inmenu"
msgid "Delete Model"
msgstr "Usuń model"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:330
msgctxt "@action:inmenu"
msgid "Ce&nter Model on Platform"
msgstr "Wyśrodkuj model na platformie"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:336
msgctxt "@action:inmenu menubar:edit"
msgid "&Group Models"
msgstr "&Grupuj modele"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:356
msgctxt "@action:inmenu menubar:edit"
msgid "Ungroup Models"
msgstr "Rozgrupuj modele"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:366
msgctxt "@action:inmenu menubar:edit"
msgid "&Merge Models"
msgstr "Połącz modele"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:376
msgctxt "@action:inmenu"
msgid "&Multiply Model..."
msgstr "&Powiel model..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
msgctxt "@action:inmenu menubar:edit"
msgid "Select All Models"
msgstr "Wybierz wszystkie modele"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:393
msgctxt "@action:inmenu menubar:edit"
msgid "Clear Build Plate"
msgstr "Wyczyść stół"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:403
msgctxt "@action:inmenu menubar:file"
msgid "Reload All Models"
msgstr "Przeładuj wszystkie modele"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
msgctxt "@action:inmenu menubar:edit"
msgid "Arrange All Models"
msgstr "Ułóż wszystkie modele"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:420
msgctxt "@action:inmenu menubar:edit"
msgid "Arrange Selection"
msgstr "Wybór ułożenia"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
msgctxt "@action:inmenu menubar:edit"
msgid "Reset All Model Positions"
msgstr "Zresetuj wszystkie pozycje modelu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
msgctxt "@action:inmenu menubar:edit"
msgid "Reset All Model Transformations"
msgstr "Zresetuj wszystkie przekształcenia modelu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:443
msgctxt "@action:inmenu menubar:file"
msgid "&Open File(s)..."
msgstr "&Otwórz plik(i)..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:453
msgctxt "@action:inmenu menubar:file"
msgid "&New Project..."
msgstr "&Nowy projekt..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:460
msgctxt "@action:inmenu menubar:help"
msgid "Show Configuration Folder"
msgstr "Pokaż folder konfiguracji"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:467
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:476
msgctxt "@action:menu"
msgid "Configure setting visibility..."
msgstr "Skonfiguruj widoczność ustawień ..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
msgctxt "@label:button"
msgid "My printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
msgctxt "@tooltip:button"
msgid "Monitor printers in Ultimaker Digital Factory."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
msgctxt "@tooltip:button"
msgid "Create print projects in Digital Library."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
msgctxt "@label:button"
msgid "Print jobs"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
msgctxt "@tooltip:button"
msgid "Monitor print jobs and reprint from your print history."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
msgctxt "@tooltip:button"
msgid "Extend Ultimaker Cura with plugins and material profiles."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
msgctxt "@tooltip:button"
msgid "Become a 3D printing expert with Ultimaker e-learning."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
msgctxt "@label:button"
msgid "Ultimaker support"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
msgctxt "@tooltip:button"
msgid "Learn how to get started with Ultimaker Cura."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
msgctxt "@label:button"
msgid "Ask a question"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
msgctxt "@tooltip:button"
msgid "Consult the Ultimaker Community."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
msgctxt "@label:button"
msgid "Report a bug"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
msgctxt "@tooltip:button"
msgid "Let developers know that something is going wrong."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
msgctxt "@tooltip:button"
msgid "Visit the Ultimaker website."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ColorDialog.qml:107
msgctxt "@label"
msgid "Hex"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:250
msgctxt "@label"
msgid "This package will be installed after restarting."
msgstr "Ten pakiet zostanie zainstalowany po ponownym uruchomieniu."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:463
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:14
msgctxt "@title:tab"
msgid "General"
msgstr "Ogólny"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
msgctxt "@title:tab"
msgid "Settings"
msgstr "Ustawienia"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:17
msgctxt "@title:tab"
msgid "Printers"
msgstr "Drukarki"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:470
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
msgctxt "@title:tab"
msgid "Materials"
msgstr "Materiał"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:472
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:57
msgctxt "@title:tab"
msgid "Profiles"
msgstr "Profile"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:589
msgctxt "@title:window %1 is the application name"
msgid "Closing %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:590
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:599
msgctxt "@label %1 is the application name"
msgid "Are you sure you want to exit %1?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:637
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
msgctxt "@title:window"
msgid "Open file(s)"
msgstr "Otwórz plik(i)"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:742
msgctxt "@window:title"
msgid "Install Package"
msgstr "Instaluj pakiety"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:749
msgctxt "@title:window"
msgid "Open File(s)"
msgstr "Otwórz plik(i)"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:751
msgctxt "@text:window"
msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
msgstr "Znaleziono jeden lub więcej plików G-code w wybranych plikach. Możesz otwierać tylko jeden plik G-code jednocześnie. Jeśli chcesz otworzyć plik G-code, proszę wybierz tylko jeden."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:831
msgctxt "@title:window"
msgid "Add Printer"
msgstr "Dodaj drukarkę"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:839
msgctxt "@title:window"
msgid "What's New"
msgstr "Co nowego"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
msgctxt "@title:window The argument is the application name."
msgid "About %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
msgctxt "@label"
msgid "version: %1"
msgstr "version: %1"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
msgctxt "@label"
msgid "End-to-end solution for fused filament 3D printing."
msgstr "Kompletne rozwiązanie do druku przestrzennego."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
msgctxt "@info:credit"
msgid ""
"Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
"Cura proudly uses the following open source projects:"
msgstr ""
"Cura jest rozwijana przez firmę Ultimaker B.V. we współpracy ze społecznością.\n"
"Cura z dumą korzysta z następujących projektów open source:"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
msgctxt "@label"
msgid "Graphical user interface"
msgstr "Graficzny interfejs użytkownika"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
msgctxt "@label"
msgid "Application framework"
msgstr "Struktura aplikacji"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
msgctxt "@label"
msgid "G-code generator"
msgstr "Generator g-code"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:139
msgctxt "@label"
msgid "Interprocess communication library"
msgstr "Biblioteka komunikacji międzyprocesowej"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
msgctxt "@label"
msgid "Python bindings for libnest2d"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
msgctxt "@label"
msgid "Polygon packing library, developed by Prusa Research"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
msgctxt "@label"
msgid "Support library for handling 3MF files"
msgstr "Wsparcie biblioteki do obsługi plików 3MF"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
msgctxt "@label"
msgid "Support library for file metadata and streaming"
msgstr "Biblioteka pomocy dla metadanych plików i przesyłania strumieniowego"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
msgctxt "@label"
msgid "Programming language"
msgstr "Język programowania"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
msgctxt "@label"
msgid "GUI framework"
msgstr "Framework GUI"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
msgctxt "@label"
msgid "GUI framework bindings"
msgstr "Powiązania Frameworka GUI"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
msgctxt "@label"
msgid "C/C++ Binding library"
msgstr "Biblioteka Powiązań C/C++"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
msgctxt "@label"
msgid "Data interchange format"
msgstr "Format wymiany danych"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
msgctxt "@label"
msgid "Font"
msgstr "Czcionka"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
msgctxt "@label"
msgid "Polygon clipping library"
msgstr "Biblioteka edytująca pola"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
msgctxt "@label"
msgid "JSON parser"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
msgctxt "@label"
msgid "Utility functions, including an image loader"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
msgctxt "@label"
msgid "Utility library, including Voronoi generation"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:161
msgctxt "@label"
msgid "Root Certificates for validating SSL trustworthiness"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
msgctxt "@label"
msgid "Compatibility between Python 2 and 3"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
msgctxt "@label"
msgid "Support library for system keyring access"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
msgctxt "@label"
msgid "Support library for faster math"
msgstr "Wsparcie biblioteki dla szybszej matematyki"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:165
msgctxt "@label"
msgid "Support library for handling STL files"
msgstr "Wsparcie biblioteki do obsługi plików STL"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:166
msgctxt "@label"
msgid "Python bindings for Clipper"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:167
msgctxt "@label"
msgid "Serial communication library"
msgstr "Biblioteka komunikacji szeregowej"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:168
msgctxt "@label"
msgid "Support library for scientific computing"
msgstr "Wsparcie biblioteki do obliczeń naukowych"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:169
msgctxt "@Label"
msgid "Python Error tracking library"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:170
msgctxt "@label"
msgid "Support library for handling triangular meshes"
msgstr "Biblioteka pomocnicza do obsługi siatek trójkątów"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:171
msgctxt "@label"
msgid "ZeroConf discovery library"
msgstr "Bilbiotek poszukująca Zeroconf"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:174
msgctxt "@label"
msgid "Universal build system configuration"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:175
msgctxt "@label"
msgid "Dependency and package manager"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:176
msgctxt "@label"
msgid "Packaging Python-applications"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:177
msgctxt "@label"
msgid "Linux cross-distribution application deployment"
msgstr "Wdrożenie aplikacji pomiędzy dystrybucjami Linux"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:178
msgctxt "@label"
msgid "Generating Windows installers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
msgctxt "@title:window"
msgid "Open project file"
msgstr "Otwórz plik projektu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
msgctxt "@text:window"
msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
msgstr "Jest to plik projektu Cura. Czy chcesz otworzyć go jako projekt, czy zaimportować z niego modele?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:90
msgctxt "@text:window"
msgid "Remember my choice"
msgstr "Zapamiętaj mój wybór"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:104
msgctxt "@action:button"
msgid "Open as project"
msgstr "Otwórz jako projekt"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:109
msgctxt "@action:button"
msgid "Import models"
msgstr "Importuj modele"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:13
msgctxt "@title:window"
msgid "Discard or Keep changes"
msgstr "Odrzuć lub zachowaj zmiany"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:49
msgctxt "@text:window, %1 is a profile name"
msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:75
msgctxt "@title:column"
msgid "Profile settings"
msgstr "Ustawienia profilu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:77
msgctxt "@title:column"
msgid "Current changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:104
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:799
msgctxt "@option:discardOrKeep"
msgid "Always ask me this"
msgstr "Zawsze pytaj o to"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:105
msgctxt "@option:discardOrKeep"
msgid "Discard and never ask again"
msgstr "Odrzuć i nigdy nie pytaj"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:106
msgctxt "@option:discardOrKeep"
msgid "Keep and never ask again"
msgstr "Zachowaj i nigdy nie pytaj"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:136
msgctxt "@action:button"
msgid "Discard changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:142
msgctxt "@action:button"
msgid "Keep changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
msgctxt "@text:window"
msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
msgstr "Znaleziono jeden lub więcej plików projektu w wybranych plikach. Możesz otwierać tylko jeden plik projektu na raz. Proponujemy importowanie tylko modeli z tych plików. Czy chcesz kontynuować?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
msgctxt "@action:button"
msgid "Import all as models"
msgstr "Importuj wszystkie jako modele"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
msgctxt "@title:window"
msgid "Save Project"
msgstr "Zapisz projekt"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:175
msgctxt "@action:label"
msgid "Extruder %1"
msgstr "Ekstruder %1"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
msgctxt "@action:label"
msgid "%1 & material"
msgstr "%1 & materiał"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193
msgctxt "@action:label"
msgid "Material"
msgstr "Materiał"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
msgctxt "@action:label"
msgid "Don't show project summary on save again"
msgstr "Nie pokazuj podsumowania projektu podczas ponownego zapisywania"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:296
msgctxt "@action:button"
msgid "Save"
msgstr "Zapisz"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
msgctxt "@label %1 is filled in with the name of an extruder"
msgid "Print Selected Model with %1"
msgid_plural "Print Selected Models with %1"
msgstr[0] "Drukuj Wybrany Model z %1"
msgstr[1] "Drukuj Wybrane Modele z %1"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:93
msgctxt "@text Print job name"
msgid "Untitled"
msgstr "Bez tytułu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
msgctxt "@title:menu menubar:toplevel"
msgid "&Settings"
msgstr "Opcje"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
msgctxt "@title:window"
msgid "New project"
msgstr "Nowy projekt"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
msgctxt "@info:question"
msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
msgstr "Czy na pewno chcesz rozpocząć nowy projekt? Spowoduje to wyczyszczenie stołu i niezapisanych ustawień."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
msgctxt "@action:button"
msgid "Marketplace"
msgstr "Marketplace"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
msgctxt "@header"
msgid "Configurations"
msgstr "Konfiguracje"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
msgctxt "@label"
msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
msgstr "Ta konfiguracja jest niedostępna, ponieważ %1 jest nierozpoznany. Przejdź do %2, aby pobrać prawidłowy profil materiału."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
msgctxt "@label"
msgid "Marketplace"
msgstr "Marketplace"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
msgctxt "@label"
msgid "Loading available configurations from the printer..."
msgstr "Ładowanie dostępnych konfiguracji z drukarki..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
msgctxt "@label"
msgid "The configurations are not available because the printer is disconnected."
msgstr "Konfiguracje są niedostępne, ponieważ drukarka jest odłączona."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
msgctxt "@tooltip"
msgid "The configuration of this extruder is not allowed, and prohibits slicing."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:110
msgctxt "@tooltip"
msgid "There are no profiles matching the configuration of this extruder."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:250
msgctxt "@label"
msgid "Select configuration"
msgstr "Wybierz konfigurację"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:358
msgctxt "@label"
msgid "Configurations"
msgstr "Konfiguracje"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
msgctxt "@header"
msgid "Custom"
msgstr "Niestandardowe"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
msgctxt "@label"
msgid "Printer"
msgstr "Drukarka"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:217
msgctxt "@label"
msgid "Enabled"
msgstr "Włączona"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:266
msgctxt "@label"
msgid "Material"
msgstr "Materiał"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:392
msgctxt "@label"
msgid "Use glue for better adhesion with this material combination."
msgstr "Użyj kleju dla lepszej przyczepności dla tej kombinacji materiałów."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:29
msgctxt "@label"
msgid "Print Selected Model With:"
msgid_plural "Print Selected Models With:"
msgstr[0] "Wydrukuj wybrany model z:"
msgstr[1] "Wydrukuj wybrane modele z:"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:92
msgctxt "@title:window"
msgid "Multiply Selected Model"
msgid_plural "Multiply Selected Models"
msgstr[0] "Zduplikuj wybrany model"
msgstr[1] "Zduplikuj wybrane modele"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:123
msgctxt "@label"
msgid "Number of Copies"
msgstr "Liczba kopii"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/EditMenu.qml:12
msgctxt "@title:menu menubar:toplevel"
msgid "&Edit"
msgstr "&Edytuj"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ExtensionMenu.qml:13
msgctxt "@title:menu menubar:toplevel"
msgid "E&xtensions"
msgstr "&Rozszerzenia"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
msgctxt "@title:menu menubar:toplevel"
msgid "&File"
msgstr "&Plik"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:45
msgctxt "@title:menu menubar:file"
msgid "&Save Project..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:78
msgctxt "@title:menu menubar:file"
msgid "&Export..."
msgstr "&Eksportuj..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:89
msgctxt "@action:inmenu menubar:file"
msgid "Export Selection..."
msgstr "Eksportuj Zaznaczenie..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/HelpMenu.qml:14
msgctxt "@title:menu menubar:toplevel"
msgid "&Help"
msgstr "P&omoc"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
msgctxt "@label:category menu label"
msgid "Material"
msgstr "Materiał"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:53
msgctxt "@label:category menu label"
msgid "Favorites"
msgstr "Ulubione"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:78
msgctxt "@label:category menu label"
msgid "Generic"
msgstr "Podstawowe"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
msgctxt "@title:menu menubar:file"
msgid "Open File(s)..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PreferencesMenu.qml:21
msgctxt "@title:menu menubar:toplevel"
msgid "P&references"
msgstr "Preferencje"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:13
msgctxt "@title:menu menubar:settings"
msgid "&Printer"
msgstr "&Drukarka"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:17
msgctxt "@label:category menu label"
msgid "Network enabled printers"
msgstr "Drukarki dostępne w sieci"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:50
msgctxt "@label:category menu label"
msgid "Local printers"
msgstr "Drukarki lokalne"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
msgctxt "@title:menu menubar:file"
msgid "Open &Recent"
msgstr "Otwórz &ostatnio używane"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
msgctxt "@title:menu menubar:file"
msgid "Save Project..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:34
msgctxt "@title:menu"
msgid "&Material"
msgstr "&Materiał"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:49
msgctxt "@action:inmenu"
msgid "Set as Active Extruder"
msgstr "Ustaw jako aktywną głowicę"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:55
msgctxt "@action:inmenu"
msgid "Enable Extruder"
msgstr "Włącz Ekstruder"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:63
msgctxt "@action:inmenu"
msgid "Disable Extruder"
msgstr "Wyłącz Ekstruder"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
msgctxt "@action:inmenu"
msgid "Visible Settings"
msgstr "Widoczne Ustawienia"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
msgctxt "@action:inmenu"
msgid "Collapse All Categories"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
msgctxt "@action:inmenu"
msgid "Manage Setting Visibility..."
msgstr "Ustaw Widoczność Ustawień..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:13
msgctxt "@title:menu menubar:toplevel"
msgid "&View"
msgstr "&Widok"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:17
msgctxt "@action:inmenu menubar:view"
msgid "&Camera position"
msgstr "&Pozycja kamery"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:30
msgctxt "@action:inmenu menubar:view"
msgid "Camera view"
msgstr "Widok z kamery"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:48
msgctxt "@action:inmenu menubar:view"
msgid "Perspective"
msgstr "Perspektywiczny"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
msgctxt "@action:inmenu menubar:view"
msgid "Orthographic"
msgstr "Rzut ortograficzny"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:115
msgctxt "@label:MonitorStatus"
msgid "Not connected to a printer"
msgstr "Nie podłączono do drukarki"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
msgctxt "@label:MonitorStatus"
msgid "Printer does not accept commands"
msgstr "Drukarka nie akceptuje poleceń"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:129
msgctxt "@label:MonitorStatus"
msgid "In maintenance. Please check the printer"
msgstr "W naprawie. Sprawdź drukarkę"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:140
msgctxt "@label:MonitorStatus"
msgid "Lost connection with the printer"
msgstr "Utracone połączenie z drukarką"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:142
msgctxt "@label:MonitorStatus"
msgid "Printing..."
msgstr "Drukowanie..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:145
msgctxt "@label:MonitorStatus"
msgid "Paused"
msgstr "Wstrzymano"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:148
msgctxt "@label:MonitorStatus"
msgid "Preparing..."
msgstr "Przygotowywanie ..."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:150
msgctxt "@label:MonitorStatus"
msgid "Please remove the print"
msgstr "Usuń wydruk"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:318
msgctxt "@label"
msgid "Abort Print"
msgstr "Anuluj Wydruk"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:327
msgctxt "@label"
msgid "Are you sure you want to abort the print?"
msgstr "Czy na pewno chcesz przerwać drukowanie?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:109
msgctxt "@label"
msgid "Is printed as support."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:112
msgctxt "@label"
msgid "Other models overlapping with this model are modified."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:115
msgctxt "@label"
msgid "Infill overlapping with this model is modified."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:118
msgctxt "@label"
msgid "Overlaps with this model are not supported."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:125
msgctxt "@label %1 is the number of settings it overrides."
msgid "Overrides %1 setting."
msgid_plural "Overrides %1 settings."
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
msgctxt "@label"
msgid "Object list"
msgstr "Lista obiektów"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:131
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:24
msgctxt "@action:button"
msgid "Defaults"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:169
msgctxt "@label"
msgid "Interface"
msgstr "Interfejs"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:212
msgctxt "@heading"
msgid "-- incomplete --"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:258
msgctxt "@label"
msgid "Currency:"
msgstr "Waluta:"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:274
msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
msgid "Theme*:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:320
msgctxt "@info:tooltip"
msgid "Slice automatically when changing settings."
msgstr "Tnij automatycznie podczas zmiany ustawień."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:328
msgctxt "@option:check"
msgid "Slice automatically"
msgstr "Automatyczne Cięcie"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:337
msgctxt "@label"
msgid "*You will need to restart the application for these changes to have effect."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:352
msgctxt "@label"
msgid "Viewport behavior"
msgstr "Zachowanie okna edycji"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
msgctxt "@info:tooltip"
msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
msgstr "Zaznacz nieobsługiwane obszary modelu na czerwono. Bez wsparcia te obszary nie będą drukowane prawidłowo."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:369
msgctxt "@option:check"
msgid "Display overhang"
msgstr "Wyświetl zwis"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:379
msgctxt "@info:tooltip"
msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
msgctxt "@option:check"
msgid "Display model errors"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:396
msgctxt "@info:tooltip"
msgid "Moves the camera so the model is in the center of the view when a model is selected"
msgstr "Przenosi kamerę, aby model był w centrum widoku, gdy wybrano model"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:401
msgctxt "@action:button"
msgid "Center camera when item is selected"
msgstr "Wyśrodkuj kamerę kiedy przedmiot jest zaznaczony"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:411
msgctxt "@info:tooltip"
msgid "Should the default zoom behavior of cura be inverted?"
msgstr "Czy domyślne zachowanie zoomu powinno zostać odwrócone?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:416
msgctxt "@action:button"
msgid "Invert the direction of camera zoom."
msgstr "Odwróć kierunek zoomu kamery."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:432
msgctxt "@info:tooltip"
msgid "Should zooming move in the direction of the mouse?"
msgstr "Czy przybliżanie powinno poruszać się w kierunku myszy?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:432
msgctxt "@info:tooltip"
msgid "Zooming towards the mouse is not supported in the orthographic perspective."
msgstr "Powiększanie w kierunku myszy nie jest obsługiwane w danej perspektywie."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:437
msgctxt "@action:button"
msgid "Zoom toward mouse direction"
msgstr "Przybliżaj w kierunku myszy"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:463
msgctxt "@info:tooltip"
msgid "Should models on the platform be moved so that they no longer intersect?"
msgstr "Czy modele na platformie powinny być przenoszone w taki sposób, aby nie przecinały się?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:468
msgctxt "@option:check"
msgid "Ensure models are kept apart"
msgstr "Upewnij się, że modele są oddzielone"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:477
msgctxt "@info:tooltip"
msgid "Should models on the platform be moved down to touch the build plate?"
msgstr "Czy modele na platformie powinny być przesunięte w dół, aby dotknęły stołu roboczego?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:482
msgctxt "@option:check"
msgid "Automatically drop models to the build plate"
msgstr "Automatycznie upuść modele na stół roboczy"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:494
msgctxt "@info:tooltip"
msgid "Show caution message in g-code reader."
msgstr "Pokaż wiadomości ostrzegawcze w czytniku g-code."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
msgctxt "@option:check"
msgid "Caution message in g-code reader"
msgstr "Wiadomość ostrzegawcza w czytniku g-code"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:511
msgctxt "@info:tooltip"
msgid "Should layer be forced into compatibility mode?"
msgstr "Czy warstwa powinna być wymuszona w trybie zgodności?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:516
msgctxt "@option:check"
msgid "Force layer view compatibility mode (restart required)"
msgstr "Wymuszenie widoku warstw w trybie zgodności (wymaga ponownego uruchomienia)"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:526
msgctxt "@info:tooltip"
msgid "Should Cura open at the location it was closed?"
msgstr "Czy Cura powinna się otwierać w miejscu, w którym została zamknięta?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
msgctxt "@option:check"
msgid "Restore window position on start"
msgstr "Przywróć pozycję okna przy starcie"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:541
msgctxt "@info:tooltip"
msgid "What type of camera rendering should be used?"
msgstr "Jakiego rodzaju kamery należy użyć do renderowania?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:548
msgctxt "@window:text"
msgid "Camera rendering:"
msgstr "Renderowanie z kamery:"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:555
msgid "Perspective"
msgstr "Perspektywiczny"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:556
msgid "Orthographic"
msgstr "Rzut ortograficzny"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:596
msgctxt "@label"
msgid "Opening and saving files"
msgstr "Otwieranie i zapisywanie plików"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:603
msgctxt "@info:tooltip"
msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:608
msgctxt "@option:check"
msgid "Use a single instance of Cura"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:619
msgctxt "@info:tooltip"
msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:625
msgctxt "@option:check"
msgid "Clear buildplate before loading model into the single instance"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
msgctxt "@info:tooltip"
msgid "Should models be scaled to the build volume if they are too large?"
msgstr "Czy modele powinny być skalowane do wielkości obszaru roboczego, jeśli są zbyt duże?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:640
msgctxt "@option:check"
msgid "Scale large models"
msgstr "Skaluj duże modele"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:650
msgctxt "@info:tooltip"
msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
msgstr "Model może wydawać się bardzo mały, jeśli jego jednostka jest na przykład w metrach, a nie w milimetrach. Czy takie modele powinny być skalowane?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:655
msgctxt "@option:check"
msgid "Scale extremely small models"
msgstr "Skaluj bardzo małe modele"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:665
msgctxt "@info:tooltip"
msgid "Should models be selected after they are loaded?"
msgstr "Czy modele powinny zostać zaznaczone po załadowaniu?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:670
msgctxt "@option:check"
msgid "Select models when loaded"
msgstr "Zaznaczaj modele po załadowaniu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:680
msgctxt "@info:tooltip"
msgid "Should a prefix based on the printer name be added to the print job name automatically?"
msgstr "Czy przedrostek oparty na nazwie drukarki powinien być automatycznie dodawany do nazwy zadania?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:685
msgctxt "@option:check"
msgid "Add machine prefix to job name"
msgstr "Dodaj przedrostek maszyny do nazwy zadania"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:695
msgctxt "@info:tooltip"
msgid "Should a summary be shown when saving a project file?"
msgstr "Czy podsumowanie powinno być wyświetlane podczas zapisu projektu?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:699
msgctxt "@option:check"
msgid "Show summary dialog when saving project"
msgstr "Pokaż okno podsumowania podczas zapisywaniu projektu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:709
msgctxt "@info:tooltip"
msgid "Default behavior when opening a project file"
msgstr "Domyślne zachowanie podczas otwierania pliku projektu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:717
msgctxt "@window:text"
msgid "Default behavior when opening a project file: "
msgstr "Domyślne zachowanie podczas otwierania pliku projektu: "

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:732
msgctxt "@option:openProject"
msgid "Always ask me this"
msgstr "Zawsze pytaj"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
msgctxt "@option:openProject"
msgid "Always open as a project"
msgstr "Zawsze otwieraj jako projekt"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:734
msgctxt "@option:openProject"
msgid "Always import models"
msgstr "Zawsze importuj modele"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:771
msgctxt "@info:tooltip"
msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
msgstr "Kiedy dokonasz zmian w profilu i przełączysz się na inny, zostanie wyświetlone okno z pytaniem, czy chcesz zachować twoje zmiany, czy nie. Możesz też wybrać domyślne zachowanie, żeby to okno już nigdy nie było pokazywane."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:780
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:36
msgctxt "@label"
msgid "Profiles"
msgstr "Profile"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:785
msgctxt "@window:text"
msgid "Default behavior for changed setting values when switching to a different profile: "
msgstr "Domyślne zachowanie dla zmienionych ustawień podczas zmiany profilu na inny: "

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:800
msgctxt "@option:discardOrKeep"
msgid "Always discard changed settings"
msgstr "Zawsze odrzucaj wprowadzone zmiany"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:801
msgctxt "@option:discardOrKeep"
msgid "Always transfer changed settings to new profile"
msgstr "Zawsze przenoś wprowadzone zmiany do nowego profilu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:835
msgctxt "@label"
msgid "Privacy"
msgstr "Prywatność"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:841
msgctxt "@info:tooltip"
msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
msgstr "Czy anonimowe dane na temat wydruku mają być wysyłane do Ultimaker? Uwaga. Żadne modele, adresy IP, ani żadne inne dane osobiste nie będą wysyłane i/lub przechowywane."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:846
msgctxt "@option:check"
msgid "Send (anonymous) print information"
msgstr "Wyślij (anonimowe) informacje o drukowaniu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:876
msgctxt "@label"
msgid "Updates"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:883
msgctxt "@info:tooltip"
msgid "Should Cura check for updates when the program is started?"
msgstr "Czy Cura ma sprawdzać dostępność aktualizacji podczas uruchamiania programu?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:888
msgctxt "@option:check"
msgid "Check for updates on start"
msgstr "Sprawdź, dostępność aktualizacji podczas uruchamiania"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:904
msgctxt "@info:tooltip"
msgid "When checking for updates, only check for stable releases."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:910
msgctxt "@option:radio"
msgid "Stable releases only"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:920
msgctxt "@info:tooltip"
msgid "When checking for updates, check for both stable and for beta releases."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:926
msgctxt "@option:radio"
msgid "Stable and Beta releases"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:936
msgctxt "@info:tooltip"
msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:941
msgctxt "@option:check"
msgid "Get notifications for plugin updates"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:50
msgctxt "@action:button"
msgid "Add New"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:134
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:294
msgctxt "@action:button"
msgid "Activate"
msgstr "Aktywuj"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:146
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:331
msgctxt "@action:button"
msgid "Rename"
msgstr "Zmień nazwę"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
msgctxt "@label"
msgid "Materials compatible with active printer:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:94
msgctxt "@action:button"
msgid "Create new"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:88
msgctxt "@action:button"
msgid "Import"
msgstr "Importuj"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
msgctxt "@action:button"
msgid "Sync with Printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:311
msgctxt "@action:button"
msgid "Duplicate"
msgstr "Duplikuj"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:342
msgctxt "@action:button"
msgid "Export"
msgstr "Eksportuj"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:392
msgctxt "@title:window"
msgid "Confirm Remove"
msgstr "Potwierdź Usunięcie"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:393
msgctxt "@label (%1 is object name)"
msgid "Are you sure you wish to remove %1? This cannot be undone!"
msgstr "Czy na pewno chcesz usunąć %1? Nie można tego cofnąć!"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
msgctxt "@title:window"
msgid "Import Material"
msgstr "Importuj Materiał"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Successfully imported material <filename>%1</filename>"
msgstr "Udało się zaimportować materiał <filename>%1</filename>"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
msgstr "Nie można zaimportować materiału <filename>%1</filename>: <message>%2</message>"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:267
msgctxt "@title:window"
msgid "Export Material"
msgstr "Eksportuj Materiał"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:272
msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
msgstr "Nie udało się wyeksportować materiału do <filename>%1</filename>: <message>%2</message>"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:275
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Successfully exported material to <filename>%1</filename>"
msgstr "Udało się wyeksportować materiał do <filename>%1</filename>"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:18
msgctxt "@title:window"
msgid "Sync materials with printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:49
msgctxt "@title:header"
msgid "Sync materials with printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:55
msgctxt "@text"
msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
msgctxt "@button"
msgid "Why do I need to sync material profiles?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:86
msgctxt "@button"
msgid "Start"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:128
msgctxt "@title:header"
msgid "Sign in"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:134
msgctxt "@text"
msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:158
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:586
msgctxt "@button"
msgid "Sync materials with USB"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:191
msgctxt "@title:header"
msgid "The following printers will receive the new material profiles:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:198
msgctxt "@title:header"
msgid "Something went wrong when sending the materials to the printers."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:205
msgctxt "@title:header"
msgid "Material profiles successfully synced with the following printers:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
msgctxt "@button"
msgid "Troubleshooting"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
msgctxt "@text Asking the user whether printers are missing in a list."
msgid "Printers missing?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
msgctxt "@text"
msgid "Make sure all your printers are turned ON and connected to Digital Factory."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
msgctxt "@button"
msgid "Refresh List"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
msgctxt "@button"
msgid "Try again"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:696
msgctxt "@button"
msgid "Done"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:606
msgctxt "@button"
msgid "Sync"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
msgctxt "@button"
msgid "Syncing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
msgctxt "@title:header"
msgid "No printers found"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
msgctxt "@text"
msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:569
msgctxt "@button"
msgid "Learn how to connect your printer to Digital Factory"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:597
msgctxt "@button"
msgid "Refresh"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:626
msgctxt "@title:header"
msgid "Sync material profiles via USB"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:632
msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
msgid "Follow the following steps to load the new material profiles to your printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:663
msgctxt "@text"
msgid "Click the export material archive button."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:664
msgctxt "@text"
msgid "Save the .umm file on a USB stick."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
msgctxt "@text"
msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:673
msgctxt "@button"
msgid "How to load new material profiles to my printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:687
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:299
msgctxt "@button"
msgid "Back"
msgstr "Wstecz"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:696
msgctxt "@button"
msgid "Export material archive"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:731
msgctxt "@title:window"
msgid "Export All Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
msgctxt "@title:window"
msgid "Confirm Diameter Change"
msgstr "Potwierdź Zmianę Średnicy"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
msgctxt "@label (%1 is a number)"
msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
msgstr "Średnica nowego filamentu została ustawiona na %1mm, i nie jest kompatybilna z bieżącym ekstruderem. Czy chcesz kontynuować?"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
msgctxt "@label"
msgid "Display Name"
msgstr "Wyświetlana nazwa"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
msgctxt "@label"
msgid "Brand"
msgstr "Marka"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
msgctxt "@label"
msgid "Material Type"
msgstr "Typ Materiału"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
msgctxt "@label"
msgid "Color"
msgstr "Kolor"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:262
msgctxt "@title"
msgid "Material color picker"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:275
msgctxt "@label"
msgid "Properties"
msgstr "Właściwości"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:286
msgctxt "@label"
msgid "Density"
msgstr "Gęstość"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:319
msgctxt "@label"
msgid "Diameter"
msgstr "Średnica"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:369
msgctxt "@label"
msgid "Filament Cost"
msgstr "Koszt Filamentu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:401
msgctxt "@label"
msgid "Filament weight"
msgstr "Waga filamentu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:433
msgctxt "@label"
msgid "Filament length"
msgstr "Długość Filamentu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:451
msgctxt "@label"
msgid "Cost per Meter"
msgstr "Koszt na metr"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:465
msgctxt "@label"
msgid "This material is linked to %1 and shares some of its properties."
msgstr "Ten materiał jest powiązany z %1 i dzieli się niekórymi swoimi właściwościami."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:472
msgctxt "@label"
msgid "Unlink Material"
msgstr "Odłącz materiał"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:485
msgctxt "@label"
msgid "Description"
msgstr "Opis"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:503
msgctxt "@label"
msgid "Adhesion Information"
msgstr "Informacje dotyczące przyczepności"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
msgctxt "@title"
msgid "Information"
msgstr "Informacja"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:647
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:18
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:82
msgctxt "@label"
msgid "Print settings"
msgstr "Ustawienia druku"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:59
msgctxt "@label"
msgid "Profiles compatible with active printer:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:98
msgctxt "@action:tooltip"
msgid "Create new profile from current settings/overrides"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:125
msgctxt "@action:label"
msgid "Some settings from current profile were overwritten."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:140
msgctxt "@action:button"
msgid "Update profile."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:143
msgctxt "@action:tooltip"
msgid "Update profile with current settings/overrides"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:148
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
msgctxt "@action:button"
msgid "Discard current changes"
msgstr "Odrzuć bieżące zmiany"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:158
msgctxt "@action:label"
msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
msgstr "Ten profil używa ustawień domyślnych określonych przez drukarkę, dlatego nie ma żadnych ustawień z poniższej liście."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:165
msgctxt "@action:label"
msgid "Your current settings match the selected profile."
msgstr "Aktualne ustawienia odpowiadają wybranemu profilowi."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:175
msgctxt "@title:tab"
msgid "Global Settings"
msgstr "Ustawienia ogólne"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:278
msgctxt "@title:window"
msgid "Create Profile"
msgstr "Stwórz profil"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:280
msgctxt "@info"
msgid "Please provide a name for this profile."
msgstr "Podaj nazwę tego profilu."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:352
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:368
msgctxt "@title:window"
msgid "Export Profile"
msgstr "Eksportuj Profil"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:382
msgctxt "@title:window"
msgid "Duplicate Profile"
msgstr "Duplikuj profil"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:409
msgctxt "@title:window"
msgid "Rename Profile"
msgstr "Zmień nazwę profilu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:422
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:429
msgctxt "@title:window"
msgid "Import Profile"
msgstr "Importuj Profil"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:22
msgctxt "@title:window"
msgid "Rename"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:23
msgctxt "@info"
msgid "Please provide a new name."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
msgctxt "@item:tooltip"
msgid "This setting has been hidden by the active machine and will not be visible."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
msgctxt "@item:tooltip %1 is list of setting names"
msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
msgctxt "@title:tab"
msgid "Setting Visibility"
msgstr "Widoczność ustawienia"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:55
msgctxt "@label:textbox"
msgid "Check all"
msgstr "Zaznacz wszystko"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
msgctxt "@label"
msgid "Extruder"
msgstr "Ekstruder"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
msgctxt "@tooltip"
msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
msgstr "Docelowa temperatura głowicy. Głowica będzie się rozgrzewać lub chłodzić do tej temperatury. Jeżeli jest równe 0, grzanie głowicy będzie wyłączone."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
msgctxt "@tooltip"
msgid "The current temperature of this hotend."
msgstr "Aktualna temperatura tej głowicy."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
msgctxt "@tooltip of temperature input"
msgid "The temperature to pre-heat the hotend to."
msgstr "Temperatura do wstępnego podgrzewania głowicy."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
msgctxt "@button Cancel pre-heating"
msgid "Cancel"
msgstr "Anuluj"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
msgctxt "@button"
msgid "Pre-heat"
msgstr "Podgrzewanie wstępne"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
msgctxt "@tooltip of pre-heat"
msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
msgstr "Podgrzej głowicę przed drukowaniem. Możesz w dalszym ciągu dostosowywać drukowanie podczas podgrzewania i nie będziesz musiał czekać na podgrzanie głowicy kiedy będziesz gotowy."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
msgctxt "@tooltip"
msgid "The colour of the material in this extruder."
msgstr "Kolor materiału w tym ekstruderze."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
msgctxt "@tooltip"
msgid "The material in this extruder."
msgstr "Materiał w głowicy drukującej."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
msgctxt "@tooltip"
msgid "The nozzle inserted in this extruder."
msgstr "Dysza włożona do tego ekstrudera."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
msgctxt "@label"
msgid "Build plate"
msgstr "Stół roboczy"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
msgctxt "@tooltip"
msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
msgstr "Temperatura docelowa podgrzewanego stołu. Stół rozgrzeje się lub schłodzi w kierunku tej temperatury. Jeśli ustawione jest 0, grzanie stołu jest wyłączone."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
msgctxt "@tooltip"
msgid "The current temperature of the heated bed."
msgstr "Bieżąca temperatura podgrzewanego stołu."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
msgctxt "@tooltip of temperature input"
msgid "The temperature to pre-heat the bed to."
msgstr "Temperatura do wstępnego podgrzewania stołu."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
msgctxt "@tooltip of pre-heat"
msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
msgstr "Przed drukowaniem podgrzej stół. W dalszym ciągu można dostosowywać druk podczas nagrzewania, a nie będziesz musiał czekać na rozgrzanie stołu, gdy będziesz gotowy do drukowania."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
msgctxt "@label"
msgid "Printer control"
msgstr "Kontrola drukarką"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
msgctxt "@label"
msgid "Jog Position"
msgstr "Pozycja Swobodnego Ruchu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
msgctxt "@label"
msgid "X/Y"
msgstr "X/Y"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
msgctxt "@label"
msgid "Z"
msgstr "Z"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
msgctxt "@label"
msgid "Jog Distance"
msgstr "Dystans Swobodnego Ruchu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
msgctxt "@label"
msgid "Send G-code"
msgstr "Wyślij G-code"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
msgctxt "@tooltip of G-code command input"
msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
msgstr "Wyślij niestandardową komendę G-code do podłączonej drukarki. Naciśnij 'enter', aby wysłać komendę."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
msgctxt "@info:status"
msgid "The printer is not connected."
msgstr "Drukarka nie jest podłączona."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
msgctxt "@status"
msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
msgctxt "@status"
msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
msgctxt "@status"
msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
msgctxt "@status"
msgid "The cloud connection is currently unavailable. Please check your internet connection."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:235
msgctxt "@button"
msgid "Add printer"
msgstr "Dodaj drukarkę"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
msgctxt "@button"
msgid "Manage printers"
msgstr "Zarządzaj drukarkami"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
msgctxt "@label"
msgid "Active print"
msgstr "Aktywny wydruk"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
msgctxt "@label"
msgid "Job Name"
msgstr "Nazwa pracy"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:172
msgctxt "@label"
msgid "Printing Time"
msgstr "Czas druku"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:180
msgctxt "@label"
msgid "Estimated time left"
msgstr "Szacowany czas pozostały"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
msgctxt "@label"
msgid "Profile"
msgstr "Profil"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:145
msgctxt "@tooltip"
msgid ""
"Some setting/override values are different from the values stored in the profile.\n"
"\n"
"Click to open the profile manager."
msgstr ""
"Niektóre wartości ustawień różnią się od wartości zapisanych w profilu.\n"
"\n"
"Kliknij, aby otworzyć menedżer profili."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
msgctxt "@label:header"
msgid "Custom profiles"
msgstr "Profile niestandardowe"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:20
msgctxt "@label shown when we load a Gcode file"
msgid "Print setup disabled. G-code file can not be modified."
msgstr "Ustawienia druku niedostępne. Plik .gcode nie może być modyfikowany."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:142
msgctxt "@button"
msgid "Recommended"
msgstr "Polecane"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:156
msgctxt "@button"
msgid "Custom"
msgstr "Niestandardowe"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
msgctxt "@label:Should be short"
msgid "On"
msgstr "Wł"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
msgctxt "@label:Should be short"
msgid "Off"
msgstr "Wył"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
msgctxt "@label"
msgid "Experimental"
msgstr "Eksperymentalne"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:54
msgctxt "@info"
msgid "custom profile is active and you overwrote some settings."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:68
msgctxt "@info"
msgid "custom profile is overriding some settings."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:79
msgctxt "@info"
msgid "Some settings were changed."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
msgctxt "@label"
msgid "Adhesion"
msgstr "Przyczepność"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
msgctxt "@label"
msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
msgstr "Włącz drukowanie obrysu lub tratwy. Spowoduje to dodanie płaskiej powierzchni wokół lub pod Twoim obiektem, która jest łatwa do usunięcia po wydruku."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:198
msgctxt "@label"
msgid "Gradual infill"
msgstr "Stopniowe wypełnienie"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:236
msgctxt "@label"
msgid "Gradual infill will gradually increase the amount of infill towards the top."
msgstr "Stopniowe wypełnienie stopniowo zwiększa ilość wypełnień w górę."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedResolutionSelector.qml:26
msgctxt "@label"
msgid "Resolution"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
msgctxt "@label"
msgid "Support"
msgstr "Podpory"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
msgctxt "@label"
msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
msgstr "Generuje podpory wspierające części modelu, które mają zwis. Bez tych podpór takie części mogłyby spaść podczas drukowania."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:31
msgctxt "@error"
msgid "Configuration not supported"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:39
msgctxt "@message:text %1 is the name the printer uses for 'nozzle'."
msgid "No profiles are available for the selected material/%1 configuration. Please change your configuration."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:47
msgctxt "@button:label"
msgid "Learn more"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:36
msgctxt "@title:column"
msgid "Setting"
msgstr "Ustawienie"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:37
msgctxt "@title:column"
msgid "Profile"
msgstr "Profil"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:38
msgctxt "@title:column"
msgid "Current"
msgstr "Aktualny"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:39
msgctxt "@title:column Unit of measurement"
msgid "Unit"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/SearchBar.qml:17
msgctxt "@placeholder"
msgid "Search"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:115
msgctxt "@label"
msgid ""
"Some hidden settings use values different from their normal calculated value.\n"
"\n"
"Click to make these settings visible."
msgstr ""
"Niektóre ukryte ustawienia używają wartości różniących się od ich normalnej, obliczonej wartości.\n"
"\n"
"Kliknij, aby te ustawienia były widoczne."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:84
msgctxt "@label"
msgid "This setting is not used because all the settings that it influences are overridden."
msgstr "To ustawienie nie jest używane, ponieważ wszystkie ustawienia, na które wpływa, są nadpisane."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:89
msgctxt "@label Header for list of settings."
msgid "Affects"
msgstr "Wpływać"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:94
msgctxt "@label Header for list of settings."
msgid "Affected By"
msgstr "Pod wpływem"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:190
msgctxt "@label"
msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
msgstr "To ustawienie jest dzielone pomiędzy wszystkimi ekstruderami. Zmiana tutaj spowoduje zmianę dla wszystkich ekstruderów."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:194
msgctxt "@label"
msgid "This setting is resolved from conflicting extruder-specific values:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:234
msgctxt "@label"
msgid ""
"This setting has a value that is different from the profile.\n"
"\n"
"Click to restore the value of the profile."
msgstr ""
"To ustawienie ma inną wartość niż w profilu.\n"
"\n"
"Kliknij, aby przywrócić wartość z profilu."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:334
msgctxt "@label"
msgid ""
"This setting is normally calculated, but it currently has an absolute value set.\n"
"\n"
"Click to restore the calculated value."
msgstr ""
"To ustawienie jest zwykle obliczane, ale obecnie ma wartość bezwzględną.\n"
"\n"
"Kliknij, aby przywrócić wartość obliczoną."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:48
msgctxt "@label:textbox"
msgid "Search settings"
msgstr "Ustawienia wyszukiwania"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:395
msgctxt "@action:menu"
msgid "Copy value to all extruders"
msgstr "Skopiuj wartość do wszystkich ekstruderów"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:404
msgctxt "@action:menu"
msgid "Copy all changed values to all extruders"
msgstr "Skopiuj wszystkie zmienione wartości do wszystkich ekstruderów"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:440
msgctxt "@action:menu"
msgid "Hide this setting"
msgstr "Ukryj tę opcję"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:453
msgctxt "@action:menu"
msgid "Don't show this setting"
msgstr "Nie pokazuj tej opcji"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:457
msgctxt "@action:menu"
msgid "Keep this setting visible"
msgstr "Pozostaw tę opcję widoczną"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:25
msgctxt "@info:tooltip"
msgid "3D View"
msgstr "Widok 3D"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:38
msgctxt "@info:tooltip"
msgid "Front View"
msgstr "Widok z przodu"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:51
msgctxt "@info:tooltip"
msgid "Top View"
msgstr "Widok z góry"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:64
msgctxt "@info:tooltip"
msgid "Left View"
msgstr "Widok z lewej strony"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:77
msgctxt "@info:tooltip"
msgid "Right View"
msgstr "Widok z prawej strony"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
msgctxt "@label"
msgid "View type"
msgstr "Typ widoku"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
msgctxt "@label"
msgid "Add a Cloud printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:73
msgctxt "@label"
msgid "Waiting for Cloud response"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:83
msgctxt "@label"
msgid "No printers found in your account?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:117
msgctxt "@label"
msgid "The following printers in your account have been added in Cura:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:186
msgctxt "@button"
msgid "Add printer manually"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203
msgctxt "@label"
msgid "Manufacturer"
msgstr "Producent"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214
msgctxt "@label"
msgid "Profile author"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226
msgctxt "@label"
msgid "Printer name"
msgstr "Nazwa drukarki"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232
msgctxt "@text"
msgid "Please name your printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
msgctxt "@label"
msgid "Add a printer"
msgstr "Dodaj drukarkę"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:38
msgctxt "@label"
msgid "Add a networked printer"
msgstr "Dodaj drukarkę sieciową"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:87
msgctxt "@label"
msgid "Add a non-networked printer"
msgstr "Dodaj drukarkę niesieciową"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
msgctxt "@label"
msgid "There is no printer found over your network."
msgstr "Nie znaleziono drukarki w Twojej sieci."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
msgctxt "@label"
msgid "Refresh"
msgstr "Odśwież"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
msgctxt "@label"
msgid "Add printer by IP"
msgstr "Dodaj drukarkę przez IP"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
msgctxt "@label"
msgid "Add cloud printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:220
msgctxt "@label"
msgid "Troubleshooting"
msgstr "Rozwiązywanie problemów"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
msgctxt "@label"
msgid "Add printer by IP address"
msgstr "Dodaj drukarkę przez IP"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:128
msgctxt "@text"
msgid "Enter your printer's IP address."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:150
msgctxt "@button"
msgid "Add"
msgstr "Dodaj"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:195
msgctxt "@label"
msgid "Could not connect to device."
msgstr "Nie można połączyć się z urządzeniem."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:196
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:201
msgctxt "@label"
msgid "Can't connect to your Ultimaker printer?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:200
msgctxt "@label"
msgid "The printer at this address has not responded yet."
msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:231
msgctxt "@label"
msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
msgstr "Ta drukarka nie może zostać dodana, ponieważ jest nieznana lub nie jest hostem grupy."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:312
msgctxt "@button"
msgid "Connect"
msgstr "Połącz"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
msgctxt "@label"
msgid "Release Notes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:123
msgctxt "@text"
msgid "Add material settings and plugins from the Marketplace"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:149
msgctxt "@text"
msgid "Backup and sync your material settings and plugins"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:175
msgctxt "@text"
msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:189
msgctxt "@button"
msgid "Skip"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:201
msgctxt "@text"
msgid "Create a free Ultimaker Account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
msgctxt "@label"
msgid "Help us to improve Ultimaker Cura"
msgstr "Pomóż nam ulepszyć Ultimaker Cura"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:56
msgctxt "@text"
msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkownika, w tym:"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:68
msgctxt "@text"
msgid "Machine types"
msgstr "Typy maszyn"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:74
msgctxt "@text"
msgid "Material usage"
msgstr "Zużycie materiału"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:80
msgctxt "@text"
msgid "Number of slices"
msgstr "Ilość warstw"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:86
msgctxt "@text"
msgid "Print settings"
msgstr "Ustawienia druku"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:99
msgctxt "@text"
msgid "Data collected by Ultimaker Cura will not contain any personal information."
msgstr "Dane zebrane przez Ultimaker Cura nie będą zawierać żadnych prywatnych danych osobowych."

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:100
msgctxt "@text"
msgid "More information"
msgstr "Więcej informacji"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
msgctxt "@label"
msgid "Empty"
msgstr "Pusty"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
msgctxt "@label"
msgid "User Agreement"
msgstr "Umowa z użytkownikiem"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
msgctxt "@button"
msgid "Decline and close"
msgstr "Odrzuć i zamknij"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
msgctxt "@label"
msgid "Welcome to Ultimaker Cura"
msgstr "Witaj w Ultimaker Cura"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:67
msgctxt "@text"
msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:82
msgctxt "@button"
msgid "Get started"
msgstr "Rozpocznij"

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
msgctxt "@label"
msgid "What's New"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Widgets/ComboBox.qml:18
msgctxt "@label"
msgid "No items to select from"
msgstr ""

#: ModelChecker/plugin.json
msgctxt "description"
msgid "Checks models and print configuration for possible printing issues and give suggestions."
msgstr "Sprawdza możliwe problemy drukowania modeli i konfiguracji wydruku i podaje porady."

#: ModelChecker/plugin.json
msgctxt "name"
msgid "Model Checker"
msgstr "Sprawdzacz Modelu"

#: 3MFReader/plugin.json
msgctxt "description"
msgid "Provides support for reading 3MF files."
msgstr "Zapewnia wsparcie dla czytania plików 3MF."

#: 3MFReader/plugin.json
msgctxt "name"
msgid "3MF Reader"
msgstr "Czytnik 3MF"

#: 3MFWriter/plugin.json
msgctxt "description"
msgid "Provides support for writing 3MF files."
msgstr "Zapewnia wsparcie dla tworzenia plików 3MF."

#: 3MFWriter/plugin.json
msgctxt "name"
msgid "3MF Writer"
msgstr "3MF Writer"

#: AMFReader/plugin.json
msgctxt "description"
msgid "Provides support for reading AMF files."
msgstr "Zapewnia wsparcie dla czytania plików AMF."

#: AMFReader/plugin.json
msgctxt "name"
msgid "AMF Reader"
msgstr "Czytnik AMF"

#: CuraDrive/plugin.json
msgctxt "description"
msgid "Backup and restore your configuration."
msgstr "Utwórz kopię zapasową i przywróć konfigurację."

#: CuraDrive/plugin.json
msgctxt "name"
msgid "Cura Backups"
msgstr "Kopie zapasowe Cura"

#: CuraEngineBackend/plugin.json
msgctxt "description"
msgid "Provides the link to the CuraEngine slicing backend."
msgstr "Zapewnia połączenie z tnącym zapleczem CuraEngine."

#: CuraEngineBackend/plugin.json
msgctxt "name"
msgid "CuraEngine Backend"
msgstr "Zaplecze CuraEngine"

#: CuraProfileReader/plugin.json
msgctxt "description"
msgid "Provides support for importing Cura profiles."
msgstr "Zapewnia wsparcie dla importowania profili Cura."

#: CuraProfileReader/plugin.json
msgctxt "name"
msgid "Cura Profile Reader"
msgstr "Czytnik Profili Cura"

#: CuraProfileWriter/plugin.json
msgctxt "description"
msgid "Provides support for exporting Cura profiles."
msgstr "Zapewnia wsparcie dla eksportowania profili Cura."

#: CuraProfileWriter/plugin.json
msgctxt "name"
msgid "Cura Profile Writer"
msgstr "Cura Profile Writer"

#: DigitalLibrary/plugin.json
msgctxt "description"
msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
msgstr ""

#: DigitalLibrary/plugin.json
msgctxt "name"
msgid "Ultimaker Digital Library"
msgstr ""

#: FirmwareUpdateChecker/plugin.json
msgctxt "description"
msgid "Checks for firmware updates."
msgstr "Sprawdź aktualizacje oprogramowania."

#: FirmwareUpdateChecker/plugin.json
msgctxt "name"
msgid "Firmware Update Checker"
msgstr "Sprawdzacz Aktualizacji Oprogramowania"

#: FirmwareUpdater/plugin.json
msgctxt "description"
msgid "Provides a machine actions for updating firmware."
msgstr "Dostarcza działanie, pozwalające na aktualizację oprogramowania sprzętowego."

#: FirmwareUpdater/plugin.json
msgctxt "name"
msgid "Firmware Updater"
msgstr "Aktualizacja oprogramowania sprzętowego"

#: GCodeGzReader/plugin.json
msgctxt "description"
msgid "Reads g-code from a compressed archive."
msgstr "Odczytuje g-code ze skompresowanych archiwum."

#: GCodeGzReader/plugin.json
msgctxt "name"
msgid "Compressed G-code Reader"
msgstr "Czytnik Skompresowanego G-code"

#: GCodeGzWriter/plugin.json
msgctxt "description"
msgid "Writes g-code to a compressed archive."
msgstr "Zapisuje g-code do skompresowanego archiwum."

#: GCodeGzWriter/plugin.json
msgctxt "name"
msgid "Compressed G-code Writer"
msgstr "Zapisywacz Skompresowanego G-code"

#: GCodeProfileReader/plugin.json
msgctxt "description"
msgid "Provides support for importing profiles from g-code files."
msgstr "Zapewnia wsparcie dla importowania profili z plików g-code."

#: GCodeProfileReader/plugin.json
msgctxt "name"
msgid "G-code Profile Reader"
msgstr "Czytnik Profili G-code"

#: GCodeReader/plugin.json
msgctxt "description"
msgid "Allows loading and displaying G-code files."
msgstr "Pozwala na ładowanie i wyświetlanie plików G-code."

#: GCodeReader/plugin.json
msgctxt "name"
msgid "G-code Reader"
msgstr "Czytnik G-code"

#: GCodeWriter/plugin.json
msgctxt "description"
msgid "Writes g-code to a file."
msgstr "Zapisuje g-code do pliku."

#: GCodeWriter/plugin.json
msgctxt "name"
msgid "G-code Writer"
msgstr "Zapisywacz G-code"

#: ImageReader/plugin.json
msgctxt "description"
msgid "Enables ability to generate printable geometry from 2D image files."
msgstr "Włącza możliwość generowania drukowalnej geometrii z pliku obrazu 2D."

#: ImageReader/plugin.json
msgctxt "name"
msgid "Image Reader"
msgstr "Czytnik Obrazu"

#: LegacyProfileReader/plugin.json
msgctxt "description"
msgid "Provides support for importing profiles from legacy Cura versions."
msgstr "Zapewnia wsparcie dla importowania profili ze starszych wersji Cura."

#: LegacyProfileReader/plugin.json
msgctxt "name"
msgid "Legacy Cura Profile Reader"
msgstr "Czytnik Profili Starszej Cura"

#: MachineSettingsAction/plugin.json
msgctxt "description"
msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
msgstr "Zapewnia możliwość zmiany ustawień maszyny (takich jak objętość robocza, rozmiar dyszy itp.)."

#: MachineSettingsAction/plugin.json
msgctxt "name"
msgid "Machine Settings Action"
msgstr ""

#: Marketplace/plugin.json
msgctxt "description"
msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
msgstr ""

#: Marketplace/plugin.json
msgctxt "name"
msgid "Marketplace"
msgstr ""

#: MonitorStage/plugin.json
msgctxt "description"
msgid "Provides a monitor stage in Cura."
msgstr "Zapewnia etap monitorowania w Cura."

#: MonitorStage/plugin.json
msgctxt "name"
msgid "Monitor Stage"
msgstr "Etap Monitorowania"

#: PerObjectSettingsTool/plugin.json
msgctxt "description"
msgid "Provides the Per Model Settings."
msgstr "Zapewnia Ustawienia dla Każdego Modelu."

#: PerObjectSettingsTool/plugin.json
msgctxt "name"
msgid "Per Model Settings Tool"
msgstr "Narzędzie Ustawień dla Każdego Modelu"

#: PostProcessingPlugin/plugin.json
msgctxt "description"
msgid "Extension that allows for user created scripts for post processing"
msgstr "Dodatek, który pozwala użytkownikowi tworzenie skryptów do post processingu"

#: PostProcessingPlugin/plugin.json
msgctxt "name"
msgid "Post Processing"
msgstr "Post Processing"

#: PrepareStage/plugin.json
msgctxt "description"
msgid "Provides a prepare stage in Cura."
msgstr "Zapewnia etap przygotowania w Cura."

#: PrepareStage/plugin.json
msgctxt "name"
msgid "Prepare Stage"
msgstr "Etap Przygotowania"

#: PreviewStage/plugin.json
msgctxt "description"
msgid "Provides a preview stage in Cura."
msgstr "Dostarcza podgląd w Cura."

#: PreviewStage/plugin.json
msgctxt "name"
msgid "Preview Stage"
msgstr "Podgląd"

#: RemovableDriveOutputDevice/plugin.json
msgctxt "description"
msgid "Provides removable drive hotplugging and writing support."
msgstr "Zapewnia wsparcie dla podłączania i zapisywania dysków zewnętrznych."

#: RemovableDriveOutputDevice/plugin.json
msgctxt "name"
msgid "Removable Drive Output Device Plugin"
msgstr "Wtyczka Urządzenia Wyjścia Dysku Zewnętrznego"

#: SentryLogger/plugin.json
msgctxt "description"
msgid "Logs certain events so that they can be used by the crash reporter"
msgstr ""

#: SentryLogger/plugin.json
msgctxt "name"
msgid "Sentry Logger"
msgstr ""

#: SimulationView/plugin.json
msgctxt "description"
msgid "Provides the preview of sliced layerdata."
msgstr ""

#: SimulationView/plugin.json
msgctxt "name"
msgid "Simulation View"
msgstr "Widok Symulacji"

#: SliceInfoPlugin/plugin.json
msgctxt "description"
msgid "Submits anonymous slice info. Can be disabled through preferences."
msgstr "Zatwierdza anonimowe informację o cięciu. Może być wyłączone w preferencjach."

#: SliceInfoPlugin/plugin.json
msgctxt "name"
msgid "Slice info"
msgstr "Informacje o cięciu"

#: SolidView/plugin.json
msgctxt "description"
msgid "Provides a normal solid mesh view."
msgstr "Zapewnia normalny widok siatki."

#: SolidView/plugin.json
msgctxt "name"
msgid "Solid View"
msgstr "Widok Bryły"

#: SupportEraser/plugin.json
msgctxt "description"
msgid "Creates an eraser mesh to block the printing of support in certain places"
msgstr "Tworzy siatkę do blokowania drukowania podpór w określonych miejscach"

#: SupportEraser/plugin.json
msgctxt "name"
msgid "Support Eraser"
msgstr "Usuwacz Podpór"

#: TrimeshReader/plugin.json
msgctxt "description"
msgid "Provides support for reading model files."
msgstr "Zapewnia wsparcie dla czytania plików modeli."

#: TrimeshReader/plugin.json
msgctxt "name"
msgid "Trimesh Reader"
msgstr "Czytnik siatki trójkątów"

#: UFPReader/plugin.json
msgctxt "description"
msgid "Provides support for reading Ultimaker Format Packages."
msgstr "Zapewnia obsługę odczytu pakietów formatu Ultimaker."

#: UFPReader/plugin.json
msgctxt "name"
msgid "UFP Reader"
msgstr "Czytnik UFP"

#: UFPWriter/plugin.json
msgctxt "description"
msgid "Provides support for writing Ultimaker Format Packages."
msgstr "Zapewnia wsparcie dla zapisywania Pakietów Formatów Ultimaker."

#: UFPWriter/plugin.json
msgctxt "name"
msgid "UFP Writer"
msgstr "Zapisywacz UFP"

#: UltimakerMachineActions/plugin.json
msgctxt "description"
msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
msgstr "Zapewnia czynności maszyny dla urządzeń Ultimaker (na przykład kreator poziomowania stołu, wybór ulepszeń itp.)."

#: UltimakerMachineActions/plugin.json
msgctxt "name"
msgid "Ultimaker machine actions"
msgstr "Czynności maszyny Ultimaker"

#: UM3NetworkPrinting/plugin.json
msgctxt "description"
msgid "Manages network connections to Ultimaker networked printers."
msgstr "Zarządza połączeniami z sieciowymi drukarkami Ultimaker."

#: UM3NetworkPrinting/plugin.json
msgctxt "name"
msgid "Ultimaker Network Connection"
msgstr "Połączenie sieciowe Ultimaker"

#: USBPrinting/plugin.json
msgctxt "description"
msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
msgstr "Akceptuje G-Code i wysyła je do drukarki. Wtyczka może też aktualizować oprogramowanie."

#: USBPrinting/plugin.json
msgctxt "name"
msgid "USB printing"
msgstr "Drukowanie USB"

#: VersionUpgrade/VersionUpgrade21to22/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
msgstr "Ulepsza konfigurację z Cura 2.1 do Cura 2.2."

#: VersionUpgrade/VersionUpgrade21to22/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.1 to 2.2"
msgstr "Ulepszenie Wersji z 2.1 do 2.2"

#: VersionUpgrade/VersionUpgrade22to24/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
msgstr "Ulepsza konfigurację z Cura 2.2 do Cura 2.4."

#: VersionUpgrade/VersionUpgrade22to24/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.2 to 2.4"
msgstr "Ulepszenie Wersji z 2.2 do 2.4"

#: VersionUpgrade/VersionUpgrade25to26/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
msgstr "Ulepsza konfigurację z Cura 2.5 do Cura 2.6."

#: VersionUpgrade/VersionUpgrade25to26/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.5 to 2.6"
msgstr "Ulepszenie Wersji z 2.5 do 2.6"

#: VersionUpgrade/VersionUpgrade26to27/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
msgstr "Ulepsza konfigurację z Cura 2.6 do Cura 2.7."

#: VersionUpgrade/VersionUpgrade26to27/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.6 to 2.7"
msgstr "Ulepszenie Wersji z 2.6 do 2.7"

#: VersionUpgrade/VersionUpgrade27to30/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
msgstr "Ulepsza konfigurację z Cura 2.7 do Cura 3.0."

#: VersionUpgrade/VersionUpgrade27to30/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.7 to 3.0"
msgstr "Ulepszenie Wersji 2.7 do 3.0"

#: VersionUpgrade/VersionUpgrade30to31/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
msgstr "Ulepsza konfigurację z Cura 3.0 do Cura 3.1."

#: VersionUpgrade/VersionUpgrade30to31/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.0 to 3.1"
msgstr "Ulepszenie Wersji 3.0 do 3.1"

#: VersionUpgrade/VersionUpgrade32to33/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
msgstr "Ulepsza konfigurację z Cura 3.2 do Cura 3.3."

#: VersionUpgrade/VersionUpgrade32to33/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.2 to 3.3"
msgstr "Ulepszenie Wersji z 3.2 do 3.3"

#: VersionUpgrade/VersionUpgrade33to34/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
msgstr "Ulepsza konfigurację z Cura 3.3 do Cura 3.4."

#: VersionUpgrade/VersionUpgrade33to34/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.3 to 3.4"
msgstr "Ulepszenie Wersji z 3.3 do 3.4"

#: VersionUpgrade/VersionUpgrade34to35/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
msgstr "Ulepsza konfigurację z Cura 3.4 do Cura 3.5."

#: VersionUpgrade/VersionUpgrade34to35/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.4 to 3.5"
msgstr "Ulepszenie Wersji z 3.4 do 3.5"

#: VersionUpgrade/VersionUpgrade35to40/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
msgstr "Uaktualnia konfiguracje z Cura 3.5 to Cura 4.0."

#: VersionUpgrade/VersionUpgrade35to40/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.5 to 4.0"
msgstr "Uaktualnij wersję 3.5 do 4.0"

#: VersionUpgrade/VersionUpgrade40to41/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
msgstr "Uaktualnia konfiguracje z Cura 4.0 to Cura 4.1."

#: VersionUpgrade/VersionUpgrade40to41/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.0 to 4.1"
msgstr "Uaktualnij wersję 4.0 do 4.1"

#: VersionUpgrade/VersionUpgrade411to412/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.11 to Cura 4.12."
msgstr ""

#: VersionUpgrade/VersionUpgrade411to412/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.11 to 4.12"
msgstr ""

#: VersionUpgrade/VersionUpgrade413to50/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
msgstr ""

#: VersionUpgrade/VersionUpgrade413to50/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.13 to 5.0"
msgstr ""

#: VersionUpgrade/VersionUpgrade41to42/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
msgstr "Uaktualnia konfiguracje z Cura 4.1 to Cura 4.2."

#: VersionUpgrade/VersionUpgrade41to42/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.1 to 4.2"
msgstr "Uaktualnij wersję 4.1 do 4.2"

#: VersionUpgrade/VersionUpgrade42to43/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
msgstr "Uaktualnia konfiguracje z Cura 4.2 to Cura 4.3."

#: VersionUpgrade/VersionUpgrade42to43/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.2 to 4.3"
msgstr "Uaktualnij wersję 4.2 do 4.3"

#: VersionUpgrade/VersionUpgrade43to44/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
msgstr "Uaktualnia konfiguracje z Cura 4.3 to Cura 4.4."

#: VersionUpgrade/VersionUpgrade43to44/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.3 to 4.4"
msgstr "Uaktualnij wersję 4.3 do 4.4"

#: VersionUpgrade/VersionUpgrade44to45/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
msgstr ""

#: VersionUpgrade/VersionUpgrade44to45/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.4 to 4.5"
msgstr ""

#: VersionUpgrade/VersionUpgrade45to46/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
msgstr ""

#: VersionUpgrade/VersionUpgrade45to46/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.5 to 4.6"
msgstr ""

#: VersionUpgrade/VersionUpgrade460to462/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
msgstr ""

#: VersionUpgrade/VersionUpgrade460to462/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.6.0 to 4.6.2"
msgstr ""

#: VersionUpgrade/VersionUpgrade462to47/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
msgstr ""

#: VersionUpgrade/VersionUpgrade462to47/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.6.2 to 4.7"
msgstr ""

#: VersionUpgrade/VersionUpgrade47to48/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
msgstr ""

#: VersionUpgrade/VersionUpgrade47to48/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.7 to 4.8"
msgstr ""

#: VersionUpgrade/VersionUpgrade48to49/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
msgstr ""

#: VersionUpgrade/VersionUpgrade48to49/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.8 to 4.9"
msgstr ""

#: VersionUpgrade/VersionUpgrade49to410/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
msgstr ""

#: VersionUpgrade/VersionUpgrade49to410/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.9 to 4.10"
msgstr ""

#: X3DReader/plugin.json
msgctxt "description"
msgid "Provides support for reading X3D files."
msgstr "Zapewnia możliwość czytania plików X3D."

#: X3DReader/plugin.json
msgctxt "name"
msgid "X3D Reader"
msgstr "Czytnik X3D"

#: XmlMaterialProfile/plugin.json
msgctxt "description"
msgid "Provides capabilities to read and write XML-based material profiles."
msgstr "Zapewnia możliwość czytania i tworzenia profili materiałów opartych o XML."

#: XmlMaterialProfile/plugin.json
msgctxt "name"
msgid "Material Profiles"
msgstr "Profile Materiału"

#: XRayView/plugin.json
msgctxt "description"
msgid "Provides the X-Ray view."
msgstr "Zapewnia widok rentgena."

#: XRayView/plugin.json
msgctxt "name"
msgid "X-Ray View"
msgstr "Widok Rentgena"

#~ msgctxt "@label"
#~ msgid "Not yet initialized<br/>"
#~ msgstr "Jeszcze nie uruchomiono<br/>"

#~ msgctxt "@label"
#~ msgid "SVG icons"
#~ msgstr "Ikony SVG"

#~ msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
#~ msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
#~ msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
#~ msgstr[0] "Nie ma profilu %1 dla konfiguracji w ekstruderze %2. Zamiast tego zostaną użyte domyślne cale"
#~ msgstr[1] "Nie ma profilu %1 dla konfiguracji w ekstruderach %2. Zamiast tego zostaną użyte domyślne cale"

#~ msgctxt "@tooltip"
#~ msgid "You have modified some profile settings. If you want to change these go to custom mode."
#~ msgstr "Zmodyfikowałeś ustawienia profilu. Jeżeli chcesz je zmienić, przejdź do trybu niestandardowego."

#~ msgctxt "@title:window"
#~ msgid "Convert Image..."
#~ msgstr "Konwertuj obraz ..."

#~ msgctxt "@info:tooltip"
#~ msgid "The width in millimeters on the build plate."
#~ msgstr "Szerokość w milimetrach na stole."

#~ msgctxt "@title"
#~ msgid "Marketplace"
#~ msgstr "Marketplace"

#~ msgctxt "@info"
#~ msgid "You will need to restart Cura before changes in packages have effect."
#~ msgstr "Należy uruchomić ponownie Cura, aby zmiany w pakietach przyniosły efekt."

#~ msgctxt "@action:button"
#~ msgid "Install"
#~ msgstr "Instaluj"

#~ msgctxt "@action:button"
#~ msgid "Installed"
#~ msgstr "Zainstalowane"

#~ msgctxt "@label"
#~ msgid "Compatibility"
#~ msgstr "Zgodność"

#~ msgctxt "@label:table_header"
#~ msgid "Machine"
#~ msgstr "Drukarka"

#~ msgctxt "@label:table_header"
#~ msgid "Build Plate"
#~ msgstr "Stół roboczy"

#~ msgctxt "@label:table_header"
#~ msgid "Support"
#~ msgstr "Podpory"

#~ msgctxt "@label:table_header"
#~ msgid "Quality"
#~ msgstr "Jakość"

#~ msgctxt "@action:label"
#~ msgid "Technical Data Sheet"
#~ msgstr "Dane Techniczne"

#~ msgctxt "@action:label"
#~ msgid "Safety Data Sheet"
#~ msgstr "Dane Bezpieczeństwa"

#~ msgctxt "@action:label"
#~ msgid "Printing Guidelines"
#~ msgstr "Wskazówki Drukowania"

#~ msgctxt "@action:label"
#~ msgid "Website"
#~ msgstr "Strona Internetowa"

#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
#~ msgid "<a href='%1'>Log in</a> is required to install or update"
#~ msgstr "<a href=‚%1’>Zaloguj</a> aby zainstalować lub aktualizować"

#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
#~ msgid "<a href='%1'>Buy material spools</a>"
#~ msgstr "<a href=‚%1’>Kup materiał na szpulach</a>"

#~ msgctxt "@action:button"
#~ msgid "Update"
#~ msgstr "Aktualizuj"

#~ msgctxt "@action:button"
#~ msgid "Updating"
#~ msgstr "Aktualizowanie"

#~ msgctxt "@action:button"
#~ msgid "Updated"
#~ msgstr "Zaktualizowano"

#~ msgctxt "@action:button"
#~ msgid "Back"
#~ msgstr "Powrót"

#~ msgctxt "@title:tab"
#~ msgid "Plugins"
#~ msgstr "Wtyczki"

#~ msgctxt "@title:tab"
#~ msgid "Installed"
#~ msgstr "Zainstalowano"

#~ msgctxt "@label"
#~ msgid "Will install upon restarting"
#~ msgstr "Zostanie zainstalowane po ponownym uruchomieniu"

#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
#~ msgid "<a href='%1'>Log in</a> is required to update"
#~ msgstr "<a href='%1'>Zaloguj</a> aby aktualizować"

#~ msgctxt "@action:button"
#~ msgid "Downgrade"
#~ msgstr "Zainstaluj poprzednią wersję"

#~ msgctxt "@action:button"
#~ msgid "Uninstall"
#~ msgstr "Odinstaluj"

#~ msgctxt "@label"
#~ msgid "Community Contributions"
#~ msgstr "Udział Społeczności"

#~ msgctxt "@label"
#~ msgid "Community Plugins"
#~ msgstr "Wtyczki Społeczności"

#~ msgctxt "@label"
#~ msgid "Generic Materials"
#~ msgstr "Materiały Podstawowe"

#~ msgctxt "@info"
#~ msgid "Fetching packages..."
#~ msgstr "Uzyskiwanie pakietów..."

#~ msgctxt "@label"
#~ msgid "Website"
#~ msgstr "Strona internetowa"

#~ msgctxt "@label"
#~ msgid "Email"
#~ msgstr "E-mail"

#~ msgctxt "@label"
#~ msgid "Version"
#~ msgstr "Wersja"

#~ msgctxt "@label"
#~ msgid "Last updated"
#~ msgstr "Ostatnia aktualizacja"

#~ msgctxt "@label"
#~ msgid "Downloads"
#~ msgstr "Pobrań"

#~ msgctxt "@info"
#~ msgid "Could not connect to the Cura Package database. Please check your connection."
#~ msgstr "Nie można połączyć się z bazą danych pakietów Cura. Sprawdź swoje połączenie z internetem."

#~ msgctxt "@title:window"
#~ msgid "Confirm uninstall"
#~ msgstr "Potwierdź deinstalację"

#~ msgctxt "@text:window"
#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
#~ msgstr "Odinstalowujesz materiały i/lub profile, które są aktualnie używane. Zatwierdzenie spowoduje przywrócenie bieżących ustawień materiału/profilu do ustawień domyślnych."

#~ msgctxt "@text:window"
#~ msgid "Materials"
#~ msgstr "Materiały"

#~ msgctxt "@text:window"
#~ msgid "Profiles"
#~ msgstr "Profile"

#~ msgctxt "@action:button"
#~ msgid "Confirm"
#~ msgstr "Potwierdź"

#~ msgctxt "@info:tooltip"
#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
#~ msgstr "Niektóre rzeczy mogą być problematyczne podczas tego wydruku. Kliknij, aby zobaczyć porady dotyczące regulacji."

#~ msgctxt "@label"
#~ msgid "Support library for handling planar objects"
#~ msgstr "Biblioteka pomocnicza do obsługi obiektów płaskich"

#~ msgctxt "@action:inmenu menubar:view"
#~ msgid "&Build plate"
#~ msgstr "P&ole robocze"

#~ msgctxt "@label"
#~ msgid "Create"
#~ msgstr "Stwórz"

#~ msgctxt "@label"
#~ msgid "Duplicate"
#~ msgstr "Duplikuj"

#~ msgctxt "@label %1 is printer name"
#~ msgid "Printer: %1"
#~ msgstr "Drukarka: %1"

#~ msgctxt "@action:button"
#~ msgid "Update profile with current settings/overrides"
#~ msgstr "Aktualizuj profil z bieżącymi ustawieniami"

#~ msgctxt "@label"
#~ msgid "Theme:"
#~ msgstr "Motyw:"

#~ msgctxt "@label"
#~ msgid "You will need to restart the application for these changes to have effect."
#~ msgstr "Musisz zrestartować aplikację, aby te zmiany zaczęły obowiązywać."

#~ msgctxt "@action:button"
#~ msgid "More information"
#~ msgstr "Więcej informacji"

#~ msgctxt "@action:button"
#~ msgid "Create"
#~ msgstr "Stwórz"

#~ msgctxt "@action:label"
#~ msgid "Printer"
#~ msgstr "Drukarka"

#~ msgctxt "@title:column"
#~ msgid "Unit"
#~ msgstr "Jednostka"

#~ msgctxt "@action:inmenu"
#~ msgid "Show Online Troubleshooting Guide"
#~ msgstr "Pokaż przewodnik rozwiązywania problemów online"

#~ msgctxt "@action:inmenu menubar:edit"
#~ msgid "Arrange All Models To All Build Plates"
#~ msgstr "Rozłóż Wszystkie Modele na Wszystkie Platformy Robocze"

#~ msgctxt "@action:menu"
#~ msgid "&Marketplace"
#~ msgstr "&Marketplace"

#~ msgctxt "description"
#~ msgid "Find, manage and install new Cura packages."
#~ msgstr "Znajdź, zarządzaj i instaluj nowe pakiety Cura."

#~ msgctxt "name"
#~ msgid "Toolbox"
#~ msgstr "Narzędzia"

#~ msgctxt "description"
#~ msgid "Provides the Simulation view."
#~ msgstr "Zapewnia widok Symulacji."

#~ msgctxt "@info:status"
#~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
#~ msgstr "Wyślij i nadzoruj zadania druku z każdego miejsca, używając konta Ultimaker."

#~ msgctxt "@info:title The %s gets replaced with the printer name."
#~ msgid "New %s firmware available"
#~ msgstr "Nowe oprogramowanie %s jest dostępne"

#~ msgctxt "@label:listbox"
#~ msgid "Layer thickness"
#~ msgstr "Grubość warstwy"

#~ msgctxt "@button"
#~ msgid "Create account"
#~ msgstr "Utwórz konto"

#~ msgctxt "@action:inmenu menubar:edit"
#~ msgid "Delete Selected Model"
#~ msgid_plural "Delete Selected Models"
#~ msgstr[0] "Usuń wybrany model"
#~ msgstr[1] "Usuń wybrane modele"

#~ msgctxt "@action:inmenu menubar:edit"
#~ msgid "Center Selected Model"
#~ msgid_plural "Center Selected Models"
#~ msgstr[0] "Wyśrodkuj wybrany model"
#~ msgstr[1] "Wyśrodkuj wybrane modele"

#~ msgctxt "@action:inmenu menubar:edit"
#~ msgid "Multiply Selected Model"
#~ msgid_plural "Multiply Selected Models"
#~ msgstr[0] "Rozmnóż wybrany model"
#~ msgstr[1] "Rozmnóż wybrane modele"

#~ msgctxt "@button"
#~ msgid "Finish"
#~ msgstr "Koniec"

#~ msgctxt "@text"
#~ msgid ""
#~ "Please follow these steps to set up\n"
#~ "Ultimaker Cura. This will only take a few moments."
#~ msgstr ""
#~ "Wykonaj poniższe kroki, aby skonfigurować\n"
#~ "Ultimaker Cura. To zajmie tylko kilka chwil."

#~ msgctxt "@label"
#~ msgid "What's new in Ultimaker Cura"
#~ msgstr "Co nowego w Ultimaker Cura"

#~ msgctxt "@info:status"
#~ msgid "The selected model was too small to load."
#~ msgstr "Wybrany model był zbyta mały do załadowania."

#~ msgctxt "@info:status"
#~ msgid "Successfully imported profile {0}"
#~ msgstr "Profil zaimportowany {0}"

#~ msgctxt "@info:status"
#~ msgid "Could not find a quality type {0} for the current configuration."
#~ msgstr "Nie można znaleźć typu jakości {0} dla bieżącej konfiguracji."

#~ msgctxt "@action:ComboBox option"
#~ msgid "Update"
#~ msgstr "Aktualizacja"

#~ msgctxt "@action:ComboBox option"
#~ msgid "Create new"
#~ msgstr "Utwórz nowy"

#~ msgctxt "@info"
#~ msgid "The webcam is not available because you are monitoring a cloud printer."
#~ msgstr "Kamera nie jest dostępna, ponieważ nadzorujesz drukarkę w chmurze."

#~ msgctxt "@text"
#~ msgid "Please give your printer a name"
#~ msgstr "Podaj nazwę drukarki"

#~ msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
#~ msgid "New features are available for your {machine_name}! It is recommended to update the firmware on your printer."
#~ msgstr "Nowe funkcje są dostępne dla twojej {machine_name}! Rekomendowane jest zaktualizowanie oprogramowania drukarki."

#~ msgctxt "@action:button"
#~ msgid "Print via Cloud"
#~ msgstr "Drukuj przez Chmurę"

#~ msgctxt "@properties:tooltip"
#~ msgid "Print via Cloud"
#~ msgstr "Drukuj przez Chmurę"

#~ msgctxt "@info:status"
#~ msgid "Connected via Cloud"
#~ msgstr "Połączony z Chmurą"

#~ msgctxt "@info:status Ultimaker Cloud should not be translated."
#~ msgid "Connect to Ultimaker Cloud"
#~ msgstr "Połacz z Ultimaker Cloud"

#~ msgctxt "@label"
#~ msgid "You need to login first before you can rate"
#~ msgstr "Musisz być zalogowany aby ocenić"

#~ msgctxt "@label"
#~ msgid "You need to install the package before you can rate"
#~ msgstr "Musisz zainstalować pakiety zanim będziesz mógł ocenić"

#~ msgctxt "@label"
#~ msgid "ratings"
#~ msgstr "oceny"

#~ msgctxt "@label"
#~ msgid "Featured"
#~ msgstr "Polecane"

#~ msgctxt "@label"
#~ msgid "Your rating"
#~ msgstr "Twoja ocena"

#~ msgctxt "@label"
#~ msgid "Author"
#~ msgstr "Autor"

#~ msgctxt "@label The argument is a username."
#~ msgid "Hi %1"
#~ msgstr "Cześć %1"

#~ msgctxt "@button"
#~ msgid "Ultimaker account"
#~ msgstr "Konto Ultimaker"

#~ msgctxt "@button"
#~ msgid "Sign out"
#~ msgstr "Wyloguj"

#~ msgctxt "@label"
#~ msgid "Support library for analysis of complex networks"
#~ msgstr "Biblioteka pomocnicza do analizy złożonych sieci"

#~ msgctxt "@Label"
#~ msgid "Python HTTP library"
#~ msgstr "Biblioteka Python HTTP"

#~ msgctxt "@text:window"
#~ msgid ""
#~ "You have customized some profile settings.\n"
#~ "Would you like to keep or discard those settings?"
#~ msgstr ""
#~ "Dostosowałeś ustawienia profilu.\n"
#~ "Chcesz zachować, czy usunąć te ustawienia?"

#~ msgctxt "@title:column"
#~ msgid "Default"
#~ msgstr "Domyślne"

#~ msgctxt "@title:column"
#~ msgid "Customized"
#~ msgstr "Dostosowane"

#~ msgctxt "@action:button"
#~ msgid "Discard"
#~ msgstr "Odrzuć"

#~ msgctxt "@action:button"
#~ msgid "Keep"
#~ msgstr "Zachowaj"

#~ msgctxt "@action:button"
#~ msgid "Create New Profile"
#~ msgstr "Utwórz nowy profil"

#~ msgctxt "@title:menu menubar:file"
#~ msgid "&Save..."
#~ msgstr "&Zapisz..."

#~ msgctxt "@text"
#~ msgid "Place enter your printer's IP address."
#~ msgstr "Wprowadź adres IP drukarki."

#~ msgctxt "@button"
#~ msgid "Create an account"
#~ msgstr "Stwórz konto"

#~ msgctxt "@info:status"
#~ msgid "Nothing to slice because none of the models fit the build volume or are assigned to a disabled extruder. Please scale or rotate models to fit, or enable an extruder."
#~ msgstr "Nic do pocięcia, ponieważ żaden z modeli nie mieści się w obszarze roboczym lub jest przypisany do wyłączonego ekstrudera. Skaluj lub obróć modele, aby dopasować lub włącz ekstruder."

#~ msgctxt "@info:backup_status"
#~ msgid "There was an error listing your backups."
#~ msgstr "Wystąpił błąd z listą kopii zapasowych."

#~ msgctxt "@title:groupbox"
#~ msgid "User description (Note: Developers may not speak your language, please use English if possible)"
#~ msgstr "Opis użytkownika (Uwaga: programiści mogą nie mówić w Twoim języku, w miarę możliwości używaj angielskiego)"

#~ msgctxt "@title:window"
#~ msgid "Closing Cura"
#~ msgstr "Zamykanie Cura"

#~ msgctxt "@label"
#~ msgid "Are you sure you want to exit Cura?"
#~ msgstr "Czy jesteś pewien, że chcesz zakończyć Cura?"

#~ msgctxt "@label"
#~ msgid "Language:"
#~ msgstr "Język:"

#~ msgctxt "@label"
#~ msgid "Ultimaker Cloud"
#~ msgstr "Chmura Ultimaker"

#~ msgctxt "@text"
#~ msgid "The next generation 3D printing workflow"
#~ msgstr "Nowa generacja systemu drukowania 3D"

#~ msgctxt "@text"
#~ msgid "- Send print jobs to Ultimaker printers outside your local network"
#~ msgstr "- Wysyłaj zadania druku do drukarek Ultimaker poza siecią lokalną"

#~ msgctxt "@text"
#~ msgid "- Store your Ultimaker Cura settings in the cloud for use anywhere"
#~ msgstr "- Przechowuj ustawienia Ultimaker Cura w chmurze, aby używać w każdym miejscu"

#~ msgctxt "@text"
#~ msgid "- Get exclusive access to print profiles from leading brands"
#~ msgstr "- Uzyskaj wyłączny dostęp do profili materiałów wiodących marek"

#~ msgctxt "@label"
#~ msgid "The value is resolved from per-extruder values "
#~ msgstr "Wartość jest pobierana z osobna dla każdego ekstrudera "

#~ msgctxt "@label"
#~ msgid "The next generation 3D printing workflow"
#~ msgstr "Nowa generacja systemu drukowania 3D"

#~ msgctxt "@text"
#~ msgid ""
#~ "- Send print jobs to Ultimaker printers outside your local network\n"
#~ "- Store your Ultimaker Cura settings in the cloud for use anywhere\n"
#~ "- Get exclusive access to print profiles from leading brands"
#~ msgstr ""
#~ "- Wysyłaj zadania druku do drukarek Ultimaker poza siecią lokalną\n"
#~ "- Przechowuj ustawienia Ultimaker Cura w chmurze, aby używać w każdym miejscu\n"
#~ "- Uzyskaj wyłączny dostęp do profili materiałów wiodących marek"

#~ msgctxt "@info:button"
#~ msgid "Quit Cura"
#~ msgstr "Zakończ Cura"

#~ msgctxt "@action:checkbox"
#~ msgid "Infill only"
#~ msgstr "Tylko wypełnienie"

#~ msgctxt "@info:tooltip"
#~ msgid "Change active post-processing scripts"
#~ msgstr "Zmień aktywne skrypty post-processingu"

#~ msgctxt "@label:listbox"
#~ msgid "Feedrate"
#~ msgstr "Szybkość Posuwu"

#~ msgctxt "name"
#~ msgid "Machine Settings action"
#~ msgstr "Ustawienia Maszyny"

#~ msgctxt "@info:title"
#~ msgid "New cloud printers found"
#~ msgstr "Znaleziono nowe drukarki w chmurze"

#~ msgctxt "@info:message"
#~ msgid "New printers have been found connected to your account, you can find them in your list of discovered printers."
#~ msgstr "Nowe drukarki podłączone do Twojego konta zostały znalezione, można je odszukać na liście wykrytych drukarek."

#~ msgctxt "@info:status"
#~ msgid "Cura does not accurately display layers when Wire Printing is enabled"
#~ msgstr "Cura nie wyświetla dokładnie warstw kiedy drukowanie przewodowe jest włączone"

#~ msgctxt "@label"
#~ msgid "Pre-sliced file {0}"
#~ msgstr "Plik pocięty wcześniej {0}"

#~ msgctxt "@label"
#~ msgid ""
#~ "This plugin contains a license.\n"
#~ "You need to accept this license to install this plugin.\n"
#~ "Do you agree with the terms below?"
#~ msgstr ""
#~ "Ten plugin zawiera licencje.\n"
#~ "Musisz zaakceptować tę licencję, aby zainstalować ten plugin.\n"
#~ "Akceptujesz poniższe postanowienia?"

#~ msgctxt "@action:button"
#~ msgid "Accept"
#~ msgstr "Akceptuj"

#~ msgctxt "@action:button"
#~ msgid "Decline"
#~ msgstr "Odrzuć"

#~ msgctxt "@action:inmenu"
#~ msgid "Show All Settings"
#~ msgstr "Pokaż Wszystkie Ustawienia"

#~ msgctxt "@title:window"
#~ msgid "Ultimaker Cura"
#~ msgstr "Cura Ultimaker"

#~ msgctxt "@title:window"
#~ msgid "About Cura"
#~ msgstr "O Cura"

#~ msgctxt "@item:inmenu"
#~ msgid "Flatten active settings"
#~ msgstr "Spłaszczyć aktywne ustawienia"

#~ msgctxt "@info:status"
#~ msgid "Profile has been flattened & activated."
#~ msgstr "Profil został spłaszczony i aktywowany."

#~ msgctxt "X3g Writer Plugin Description"
#~ msgid "Writes X3g to files"
#~ msgstr "Zapisuje do plików X3g"

#~ msgctxt "X3g Writer File Description"
#~ msgid "X3g File"
#~ msgstr "Plik X3g"

#~ msgctxt "X3G Writer File Description"
#~ msgid "X3G File"
#~ msgstr "Plik X3G"

#~ msgctxt "@item:inlistbox"
#~ msgid "Open Compressed Triangle Mesh"
#~ msgstr "Otwórz skompresowaną siatkę trójkątów"

#~ msgctxt "@item:inmenu"
#~ msgid "Profile Assistant"
#~ msgstr "Asystent Profilu"

#~ msgctxt "@item:inlistbox"
#~ msgid "Profile Assistant"
#~ msgstr "Asystent Profilu"

#~ msgctxt "@action:button"
#~ msgid "Retry"
#~ msgstr "Spróbuj ponownie"

#~ msgctxt "@label:table_header"
#~ msgid "Print Core"
#~ msgstr "Rdzeń drukujący"

#~ msgctxt "@label"
#~ msgid "Don't support overlap with other models"
#~ msgstr "Nie wspieraj nałożeń z innymi modelami"

#~ msgctxt "@label"
#~ msgid "Modify settings for overlap with other models"
#~ msgstr "Modyfikuj ustawienia nakładania z innymi modelami"

#~ msgctxt "@label"
#~ msgid "Modify settings for infill of other models"
#~ msgstr "Modyfikuj ustawienia wypełnienia innych modeli"

#~ msgctxt "@action:ComboBox option"
#~ msgid "Update existing"
#~ msgstr "Zaktualizuj istniejące"

#~ msgctxt "@label"
#~ msgid "Not supported"
#~ msgstr "Niewspierany"

#~ msgctxt "@action:button"
#~ msgid "Previous"
#~ msgstr "Poprzedni"

#~ msgctxt "@label"
#~ msgid "Tip"
#~ msgstr "Końcówka"

#~ msgctxt "@label"
#~ msgid "Print experiment"
#~ msgstr "Próbny wydruk"

#~ msgctxt "@label"
#~ msgid "Checklist"
#~ msgstr "Lista kontrolna"

#~ msgctxt "@label"
#~ msgid "Please select any upgrades made to this Ultimaker 2."
#~ msgstr "Proszę wybrać ulepszenia w tym Ultimaker 2."

#~ msgctxt "@label"
#~ msgid "Olsson Block"
#~ msgstr "Olsson Block"

#~ msgctxt "@window:text"
#~ msgid "Camera rendering: "
#~ msgstr "Renderowanie z kamery: "

#~ msgctxt "@info:tooltip"
#~ msgid "Use multi build plate functionality"
#~ msgstr "Użyj funkcji wielu pól roboczych"

#~ msgctxt "@option:check"
#~ msgid "Use multi build plate functionality (restart required)"
#~ msgstr "Użyj funkcji wielu pól roboczych (wymagany restart)"

#~ msgctxt "@label"
#~ msgid "Default profiles"
#~ msgstr "Domyślne profile"

#~ msgctxt "@label:textbox"
#~ msgid "search settings"
#~ msgstr "ustawienia wyszukiwania"

#~ msgctxt "@label"
#~ msgid "Layer Height"
#~ msgstr "Wysokość warstwy"

#~ msgctxt "@tooltip"
#~ msgid "This quality profile is not available for your current material and nozzle configuration. Please change these to enable this quality profile."
#~ msgstr "Ten profil jakości nie jest dostępny dla bieżącej konfiguracji materiałów i dysz. Zmień ją, aby włączyć ten profil jakości."

#~ msgctxt "@tooltip"
#~ msgid "A custom profile is currently active. To enable the quality slider, choose a default quality profile in Custom tab"
#~ msgstr "Niestandardowy profil jest obecnie aktywny. Aby włączyć pasek jakości, wybierz domyślny profil w zakładce Niestandardowe"

#~ msgctxt "@title:menu"
#~ msgid "&Build plate"
#~ msgstr "&Pole robocze"

#~ msgctxt "@title:settings"
#~ msgid "&Profile"
#~ msgstr "&Profil"

#~ msgctxt "@action:label"
#~ msgid "Build plate"
#~ msgstr "Pole robocze"

#~ msgctxt "description"
#~ msgid "Dump the contents of all settings to a HTML file."
#~ msgstr "Wsypuje zawartość wszystkich ustawień do pliku HTML."

#~ msgctxt "name"
#~ msgid "God Mode"
#~ msgstr "Tryb Boga"

#~ msgctxt "description"
#~ msgid "Create a flattened quality changes profile."
#~ msgstr "Stwórz spłaszczony profil zmian jakości."

#~ msgctxt "name"
#~ msgid "Profile Flattener"
#~ msgstr "Spłaszcz profil"

#~ msgctxt "description"
#~ msgid "Allows material manufacturers to create new material and quality profiles using a drop-in UI."
#~ msgstr "Pozwala twórcą materiałów na tworzenie nowych profili materiałów i jakości używając rozwijanego menu."

#~ msgctxt "name"
#~ msgid "Print Profile Assistant"
#~ msgstr "Asystent Profilów Druku"

#~ msgctxt "@info:status"
#~ msgid "Connected over the network."
#~ msgstr "Połączono przez sieć."

#~ msgctxt "@info:status"
#~ msgid "Connected over the network. Please approve the access request on the printer."
#~ msgstr "Połączono przez sieć. Proszę zatwierdzić żądanie dostępu na drukarce."

#~ msgctxt "@info:status"
#~ msgid "Connected over the network. No access to control the printer."
#~ msgstr "Połączono przez sieć. Brak dostępu do sterowania drukarką."

#~ msgctxt "@info:status"
#~ msgid "Access to the printer requested. Please approve the request on the printer"
#~ msgstr "Wymagany dostęp do drukarki. Proszę zatwierdzić prośbę na drukarce"

#~ msgctxt "@info:title"
#~ msgid "Authentication status"
#~ msgstr "Status uwierzytelniania"

#~ msgctxt "@info:title"
#~ msgid "Authentication Status"
#~ msgstr "Status Uwierzytelniania"

#~ msgctxt "@info:tooltip"
#~ msgid "Re-send the access request"
#~ msgstr "Prześlij ponownie żądanie dostępu"

#~ msgctxt "@info:status"
#~ msgid "Access to the printer accepted"
#~ msgstr "Dostęp do drukarki został zaakceptowany"

#~ msgctxt "@info:status"
#~ msgid "No access to print with this printer. Unable to send print job."
#~ msgstr "Brak dostępu do tej drukarki. Nie można wysłać zadania drukowania."

#~ msgctxt "@action:button"
#~ msgid "Request Access"
#~ msgstr "Poproś o dostęp"

#~ msgctxt "@info:tooltip"
#~ msgid "Send access request to the printer"
#~ msgstr "Wyślij żądanie dostępu do drukarki"

#~ msgctxt "@label"
#~ msgid "Unable to start a new print job."
#~ msgstr "Nie można uruchomić nowego zadania drukowania."

#~ msgctxt "@label"
#~ msgid "There is an issue with the configuration of your Ultimaker, which makes it impossible to start the print. Please resolve this issues before continuing."
#~ msgstr "Wystąpił problem z konfiguracją twojego Ultimaker'a, przez który nie można rozpocząć wydruku. Proszę rozwiąż te problemy przed kontynuowaniem."

#~ msgctxt "@window:title"
#~ msgid "Mismatched configuration"
#~ msgstr "Niedopasowana konfiguracja"

#~ msgctxt "@label"
#~ msgid "Are you sure you wish to print with the selected configuration?"
#~ msgstr "Czy na pewno chcesz drukować z wybraną konfiguracją?"

#~ msgctxt "@label"
#~ msgid "There is a mismatch between the configuration or calibration of the printer and Cura. For the best result, always slice for the PrintCores and materials that are inserted in your printer."
#~ msgstr "Występuje niezgodność między konfiguracją lub kalibracją drukarki a Curą. Aby uzyskać najlepszy rezultat, zawsze tnij dla Print core'ów i materiałów włożonych do drukarki."

#~ msgctxt "@info:status"
#~ msgid "Sending new jobs (temporarily) blocked, still sending the previous print job."
#~ msgstr "Wysyłanie nowych zadań (tymczasowo) zostało zablokowane, dalej wysyłane jest poprzednie zadanie."

#~ msgctxt "@info:status"
#~ msgid "Sending data to printer"
#~ msgstr "Wysyłanie danych do drukarki"

#~ msgctxt "@info:title"
#~ msgid "Sending Data"
#~ msgstr "Wysyłanie danych"

#~ msgctxt "@info:status"
#~ msgid "No Printcore loaded in slot {slot_number}"
#~ msgstr "Brak Printcore'a w slocie {slot_number}"

#~ msgctxt "@info:status"
#~ msgid "No material loaded in slot {slot_number}"
#~ msgstr "Brak załadowanego materiału w slocie {slot_number}"

#~ msgctxt "@label"
#~ msgid "Different PrintCore (Cura: {cura_printcore_name}, Printer: {remote_printcore_name}) selected for extruder {extruder_id}"
#~ msgstr "Inny PrintCore (Cura: {cura_printcore_name}, Drukarka: {remote_printcore_name}) wybrany dla extrudera {extruder_id}"

#~ msgctxt "@label"
#~ msgid "Different material (Cura: {0}, Printer: {1}) selected for extruder {2}"
#~ msgstr "Różne materiały (Cura: {0}, Drukarka: {1}) wybrane do dzyszy {2}"

#~ msgctxt "@window:title"
#~ msgid "Sync with your printer"
#~ msgstr "Synchronizuj się z drukarką"

#~ msgctxt "@label"
#~ msgid "Would you like to use your current printer configuration in Cura?"
#~ msgstr "Czy chcesz używać bieżącej konfiguracji drukarki w programie Cura?"

#~ msgctxt "@label"
#~ msgid "The PrintCores and/or materials on your printer differ from those within your current project. For the best result, always slice for the PrintCores and materials that are inserted in your printer."
#~ msgstr "PrintCore'y i/lub materiały w drukarce różnią się od tych w obecnym projekcie. Dla najlepszego rezultatu, zawsze tnij dla wybranych PrinCore'ów i materiałów, które są umieszczone w drukarce."

#~ msgctxt "@action:button"
#~ msgid "View in Monitor"
#~ msgstr "Zobacz w Monitorze"

#~ msgctxt "@info:status"
#~ msgid "Printer '{printer_name}' has finished printing '{job_name}'."
#~ msgstr "{printer_name} skończyła drukowanie '{job_name}'."

#~ msgctxt "@info:status"
#~ msgid "The print job '{job_name}' was finished."
#~ msgstr "Zadanie '{job_name}' zostało zakończone."

#~ msgctxt "@info:status"
#~ msgid "Print finished"
#~ msgstr "Drukowanie zakończone"

#~ msgctxt "@label:material"
#~ msgid "Empty"
#~ msgstr "Pusty"

#~ msgctxt "@label:material"
#~ msgid "Unknown"
#~ msgstr "Nieznany"

#~ msgctxt "@info:title"
#~ msgid "Cloud error"
#~ msgstr "Błąd Chmury"

#~ msgctxt "@info:status"
#~ msgid "Could not export print job."
#~ msgstr "Nie można eksportować zadania druku."

#~ msgctxt "@info:description"
#~ msgid "There was an error connecting to the cloud."
#~ msgstr "Wystąpił błąd połączenia z chmurą."

#~ msgctxt "@info:status"
#~ msgid "Uploading via Ultimaker Cloud"
#~ msgstr "Przesyłanie z Ultimaker Cloud"

#~ msgctxt "@info:status Ultimaker Cloud is a brand name and shouldn't be translated."
#~ msgid "Connect to Ultimaker Cloud"
#~ msgstr "Połącz z Ultimaker Cloud"

#~ msgctxt "@action"
#~ msgid "Don't ask me again for this printer."
#~ msgstr "Nie pytaj więcej dla tej drukarki."

#~ msgctxt "@info:status"
#~ msgid "You can now send and monitor print jobs from anywhere using your Ultimaker account."
#~ msgstr "Możesz teraz wysłać i nadzorować zadania druku z każdego miejsca, używając konta Ultimaker."

#~ msgctxt "@info:status"
#~ msgid "Connected!"
#~ msgstr "Połączono!"

#~ msgctxt "@action"
#~ msgid "Review your connection"
#~ msgstr "Odnów połączenie"

#~ msgctxt "@info:status Don't translate the XML tags <filename>!"
#~ msgid "The machine defined in profile <filename>{0}</filename> ({1}) doesn't match with your current machine ({2}), could not import it."
#~ msgstr "Drukarka zdefiniowana w profilu <filename>{0}</filename> ({1}) nie jest zgodna z bieżącą drukarką ({2}), nie można jej importować."

#~ msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
#~ msgid "Failed to import profile from <filename>{0}</filename>:"
#~ msgstr "Nie powiódł się import profilu z <filename>{0}</filename>:"

#~ msgctxt "@window:title"
#~ msgid "Existing Connection"
#~ msgstr "Istniejące Połączenie"

#~ msgctxt "@message:text"
#~ msgid "This printer/group is already added to Cura. Please select another printer/group."
#~ msgstr "Ta drukarka/grupa jest już dodana do Cura. Proszę wybierz inną drukarkę/grupę."

#~ msgctxt "@label"
#~ msgid "Enter the IP address or hostname of your printer on the network."
#~ msgstr "Podaj adres IP lub nazwę hosta drukarki w sieci."

#~ msgctxt "@info:tooltip"
#~ msgid "Connect to a printer"
#~ msgstr "Podłącz do drukarki"

#~ msgctxt "@title"
#~ msgid "Cura Settings Guide"
#~ msgstr "Przewodnik po ustawieniach Cura"

#~ msgctxt "description"
#~ msgid "Manages network connections to Ultimaker 3 printers."
#~ msgstr "Zarządza ustawieniami połączenia sieciowego z drukarkami Ultimaker 3."

#~ msgctxt "name"
#~ msgid "UM3 Network Connection"
#~ msgstr "Połączenie Sieciowe UM3"

#~ msgctxt "description"
#~ msgid "Provides extra information and explanations about settings in Cura, with images and animations."
#~ msgstr "Zawiera dodatkowe informacje i objaśnienia dotyczące ustawień w Cura, z obrazami i animacjami."

#~ msgctxt "name"
#~ msgid "Settings Guide"
#~ msgstr "Przewodnik po ustawieniach"

#~ msgctxt "@item:inmenu"
#~ msgid "Cura Settings Guide"
#~ msgstr "Przewodnik po ustawieniach Cura"

#~ msgctxt "@info:generic"
#~ msgid "Settings have been changed to match the current availability of extruders: [%s]"
#~ msgstr "Ustawienia został zmienione, aby pasowały do obecnej dostępności extruderów: [%s]"

#~ msgctxt "@title:groupbox"
#~ msgid "User description"
#~ msgstr "Opis użytkownika"

#~ msgctxt "@info"
#~ msgid "These options are not available because you are monitoring a cloud printer."
#~ msgstr "Te opcje nie są dostępne, ponieważ nadzorujesz drukarkę w chmurze."

#~ msgctxt "@label link to connect manager"
#~ msgid "Go to Cura Connect"
#~ msgstr "Idź do Cura Connect"

#~ msgctxt "@info"
#~ msgid "All jobs are printed."
#~ msgstr "Wszystkie zadania są drukowane."

#~ msgctxt "@label link to connect manager"
#~ msgid "View print history"
#~ msgstr "Poważ historię druku"

#~ msgctxt "@label"
#~ msgid ""
#~ "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer.\n"
#~ "\n"
#~ "Select your printer from the list below:"
#~ msgstr ""
#~ "Aby drukować bezpośrednio w drukarce w sieci, upewnij się, że drukarka jest podłączona do sieci przy użyciu kabla sieciowego lub sieci WIFI. Jeśli nie podłączasz Cury do drukarki, możesz nadal używać dysku USB do przesyłania plików g-code do drukarki.\n"
#~ "\n"
#~ "Wybierz drukarkę z poniższej listy:"

#~ msgctxt "@info"
#~ msgid ""
#~ "Please make sure your printer has a connection:\n"
#~ "- Check if the printer is turned on.\n"
#~ "- Check if the printer is connected to the network."
#~ msgstr ""
#~ "Upewnij się czy drukarka jest połączona:\n"
#~ "- Sprawdź czy drukarka jest włączona.\n"
#~ "- Sprawdź czy drukarka jest podłączona do sieci."

#~ msgctxt "@option:check"
#~ msgid "See only current build plate"
#~ msgstr "Pokaż tylko aktualną platformę roboczą"

#~ msgctxt "@action:button"
#~ msgid "Arrange to all build plates"
#~ msgstr "Rozłóż na wszystkich platformach roboczych"

#~ msgctxt "@action:button"
#~ msgid "Arrange current build plate"
#~ msgstr "Rozłóż na obecnej platformie roboczej"

#~ msgctxt "description"
#~ msgid "Allows saving the resulting slice as an X3G file, to support printers that read this format (Malyan, Makerbot and other Sailfish-based printers)."
#~ msgstr "Umożliwia zapisanie wyników cięcia jako plik X3G, aby wspierać drukarki obsługujące ten format (Malyan, Makerbot oraz inne oparte o oprogramowanie Sailfish)."

#~ msgctxt "name"
#~ msgid "X3GWriter"
#~ msgstr "Zapisywacz X3G"

#~ msgctxt "description"
#~ msgid "Reads SVG files as toolpaths, for debugging printer movements."
#~ msgstr "Czyta pliki SVG jako ścieżki, do debugowania ruchów drukarki."

#~ msgctxt "name"
#~ msgid "SVG Toolpath Reader"
#~ msgstr "Czytnik ścieżek SVG"

#~ msgctxt "@item:inmenu"
#~ msgid "Changelog"
#~ msgstr "Lista zmian"

#~ msgctxt "@item:inmenu"
#~ msgid "Show Changelog"
#~ msgstr "Pokaż Dziennik"

#~ msgctxt "@info:status"
#~ msgid "Sending data to remote cluster"
#~ msgstr "Wysyłanie danych do zdalnego klastra"

#~ msgctxt "@info:status"
#~ msgid "Connect to Ultimaker Cloud"
#~ msgstr "Połącz z Ultimaker Cloud"

#~ msgctxt "@info"
#~ msgid "Cura collects anonymized usage statistics."
#~ msgstr "Cura zbiera anonimowe dane statystyczne."

#~ msgctxt "@info:title"
#~ msgid "Collecting Data"
#~ msgstr "Zbieranie Danych"

#~ msgctxt "@action:button"
#~ msgid "More info"
#~ msgstr "Więcej informacji"

#~ msgctxt "@action:tooltip"
#~ msgid "See more information on what data Cura sends."
#~ msgstr "Zobacz więcej informacji o tym, jakie dane przesyła Cura."

#~ msgctxt "@action:button"
#~ msgid "Allow"
#~ msgstr "Zezwól"

#~ msgctxt "@action:tooltip"
#~ msgid "Allow Cura to send anonymized usage statistics to help prioritize future improvements to Cura. Some of your preferences and settings are sent, the Cura version and a hash of the models you're slicing."
#~ msgstr "Zezwól Cura na wysyłanie anonimowych danych statystycznych, aby pomóc w wyborze przyszłych usprawnień Cura. Część twoich ustawień i preferencji jest wysyłana, a także wersja Cury i kod modelu który tniesz."

#~ msgctxt "@item:inmenu"
#~ msgid "Evaluation"
#~ msgstr "Obliczanie"

#~ msgctxt "@info:title"
#~ msgid "Network enabled printers"
#~ msgstr "Drukarki dostępne w sieci"

#~ msgctxt "@info:title"
#~ msgid "Local printers"
#~ msgstr "Drukarki lokalne"

#~ msgctxt "@info:backup_failed"
#~ msgid "Tried to restore a Cura backup that does not match your current version."
#~ msgstr "Podjęto próbę przywrócenia kopii zapasowej Cura, która nie odpowiada obecnej wersji programu."

#~ msgctxt "@title"
#~ msgid "Machine Settings"
#~ msgstr "Ustawienia Drukarki"

#~ msgctxt "@label"
#~ msgid "Printer Settings"
#~ msgstr "Ustawienia drukarki"

#~ msgctxt "@option:check"
#~ msgid "Origin at center"
#~ msgstr "Początek na środku"

#~ msgctxt "@option:check"
#~ msgid "Heated bed"
#~ msgstr "Podgrzewany stół"

#~ msgctxt "@label"
#~ msgid "Printhead Settings"
#~ msgstr "Ustawienia głowic drukujących"

#~ msgctxt "@tooltip"
#~ msgid "Distance from the left of the printhead to the center of the nozzle. Used to prevent colissions between previous prints and the printhead when printing \"One at a Time\"."
#~ msgstr "Odległość od lewej strony głowicy do środka dyszy. Używane do unikania kolizji pomiędzy poprzednimi wydrukami a głowicą podczas drukowania \"Jeden na Raz\"."

#~ msgctxt "@tooltip"
#~ msgid "Distance from the front of the printhead to the center of the nozzle. Used to prevent colissions between previous prints and the printhead when printing \"One at a Time\"."
#~ msgstr "Odległość od przedniej strony głowicy do środka dyszy. Używane do unikania kolizji pomiędzy poprzednimi wydrukami a głowicą podczas drukowania \"Jeden na Raz\"."

#~ msgctxt "@tooltip"
#~ msgid "Distance from the right of the printhead to the center of the nozzle. Used to prevent colissions between previous prints and the printhead when printing \"One at a Time\"."
#~ msgstr "Odległość od prawej strony głowicy do środka dyszy. Używane do unikania kolizji pomiędzy poprzednimi wydrukami a głowicą podczas drukowania \"Jeden na Raz\"."

#~ msgctxt "@tooltip"
#~ msgid "Distance from the rear of the printhead to the center of the nozzle. Used to prevent colissions between previous prints and the printhead when printing \"One at a Time\"."
#~ msgstr "Odległość od tylnej strony głowicy do środka dyszy. Używane do unikania kolizji pomiędzy poprzednimi wydrukami a głowicą podczas drukowania \"Jeden na Raz\"."

#~ msgctxt "@label"
#~ msgid "Gantry height"
#~ msgstr "Wysokość ramy"

#~ msgctxt "@tooltip"
#~ msgid "The height difference between the tip of the nozzle and the gantry system (X and Y axes). Used to prevent collisions between previous prints and the gantry when printing \"One at a Time\"."
#~ msgstr "Różnica w wysokości pomiędzy końcówką dyszy i systemem suwnym (osie X i Y). Używane do unikania kolizji z poprzednimi wydrukami podczas drukowania \"Jeden na Raz\"."

#~ msgctxt "@label"
#~ msgid "Start G-code"
#~ msgstr "Początkowy G-code"

#~ msgctxt "@tooltip"
#~ msgid "G-code commands to be executed at the very start."
#~ msgstr "Komedy G-code, które są wykonywane na samym początku."

#~ msgctxt "@label"
#~ msgid "End G-code"
#~ msgstr "Końcowy G-code"

#~ msgctxt "@tooltip"
#~ msgid "G-code commands to be executed at the very end."
#~ msgstr "Komendy G-code, które są wykonywane na samym końcu."

#~ msgctxt "@label"
#~ msgid "Nozzle Settings"
#~ msgstr "Ustawienia dyszy"

#~ msgctxt "@tooltip"
#~ msgid "The nominal diameter of filament supported by the printer. The exact diameter will be overridden by the material and/or the profile."
#~ msgstr "Nominalna średnica filamentu wspierana przez drukarkę. Dokładna średnica będzie nadpisana przez materiał i/lub profil."

#~ msgctxt "@label"
#~ msgid "Extruder Start G-code"
#~ msgstr "Początkowy G-code Ekstrudera"

#~ msgctxt "@label"
#~ msgid "Extruder End G-code"
#~ msgstr "Końcowy G-code Ekstrudera"

#~ msgctxt "@label"
#~ msgid "Changelog"
#~ msgstr "Dziennik"

#~ msgctxt "@title:window"
#~ msgid "User Agreement"
#~ msgstr "Zgoda Użytkownika"

#~ msgctxt "@alabel"
#~ msgid "Enter the IP address or hostname of your printer on the network."
#~ msgstr "Wpisz adres IP lub nazwę hosta drukarki w sieci."

#~ msgctxt "@info"
#~ msgid "Please select a network connected printer to monitor."
#~ msgstr "Wybierz drukarkę połączoną z siecią, aby nadzorować."

#~ msgctxt "@info"
#~ msgid "Please connect your Ultimaker printer to your local network."
#~ msgstr "Połącz drukarkę Ultimaker z twoją siecią lokalną."

#~ msgctxt "@text:window"
#~ msgid "Cura sends anonymous data to Ultimaker in order to improve the print quality and user experience. Below is an example of all the data that is sent."
#~ msgstr "Cura wysyła anonimowe dane do Ultimaker w celu polepszenia jakości wydruków oraz interakcji z użytkownikiem. Poniżej podano przykład wszystkich danych, jakie mogą być przesyłane."

#~ msgctxt "@text:window"
#~ msgid "I don't want to send this data"
#~ msgstr "Nie chcę wysyłać danych"

#~ msgctxt "@text:window"
#~ msgid "Allow sending this data to Ultimaker and help us improve Cura"
#~ msgstr "Pozwól wysłać te dane do Ultimakera i pomóż nam ulepszyć Curę"

#~ msgctxt "@label"
#~ msgid "No print selected"
#~ msgstr "Żaden wydruk nie jest zaznaczony"

#~ msgctxt "@info:tooltip"
#~ msgid "By default, white pixels represent high points on the mesh and black pixels represent low points on the mesh. Change this option to reverse the behavior such that black pixels represent high points on the mesh and white pixels represent low points on the mesh."
#~ msgstr "Domyślnie białe piksele przedstawiają wysokie punkty na siatce, a czarne piksele przedstawiają niskie punkty na siatce. Zmień tę opcję, aby odwrócić takie zachowanie, tak żeby czarne piksele przedstawiają wysokie punkty na siatce, a białe piksele przedstawiają niskie punkty na siatce."

#~ msgctxt "@title"
#~ msgid "Select Printer Upgrades"
#~ msgstr "Wybierz ulepszenia drukarki"

#~ msgctxt "@label"
#~ msgid "Select which extruder to use for support. This will build up supporting structures below the model to prevent the model from sagging or printing in mid air."
#~ msgstr "Wybierz, który ekstruder ma służyć do drukowania podpór. Powoduje to tworzenie podpór poniżej modelu, aby zapobiec spadaniu lub drukowaniu modelu w powietrzu."

#~ msgctxt "@tooltip"
#~ msgid "This quality profile is not available for your current material and nozzle configuration. Please change these to enable this quality profile"
#~ msgstr "Ten profil jakości nie jest dostępny dla bieżącej konfiguracji materiałów i dysz. Zmień je, aby włączyć ten profil jakości"

#~ msgctxt "@label shown when we load a Gcode file"
#~ msgid "Print setup disabled. G code file can not be modified."
#~ msgstr "Ustawienia druku niedostępne. Plik .gcode nie może być modyfikowany."

#~ msgctxt "@label"
#~ msgid "See the material compatibility chart"
#~ msgstr "Zobacz tabelę kompatybilności materiałów"

#~ msgctxt "@label"
#~ msgid "View types"
#~ msgstr "Typy widoków"

#~ msgctxt "@label"
#~ msgid "Hi "
#~ msgstr "Cześć "

#~ msgctxt "@text"
#~ msgid ""
#~ "- Send print jobs to Ultimaker printers outside your local network\n"
#~ "- Store your Ultimaker Cura settings in the cloud for use anywhere\n"
#~ "- Get exclusive access to material profiles from leading brands"
#~ msgstr ""
#~ "- Wysyłaj zadania druku do drukarek Ultimaker poza siecią lokalną\n"
#~ "- Przechowuj ustawienia Ultimaker Cura w chmurze, aby używać w każdym miejscu\n"
#~ "- Uzyskaj wyłączny dostęp do profili materiałów wiodących marek"

#~ msgctxt "@label:PrintjobStatus"
#~ msgid "Unable to Slice"
#~ msgstr "Nie można pociąć"

#~ msgctxt "@label"
#~ msgid "Time specification"
#~ msgstr "Specyfikacja czasu"

#~ msgctxt "@label"
#~ msgid "Material specification"
#~ msgstr "Specyfikacja materiału"

#~ msgctxt "@title:tab"
#~ msgid "Add a printer to Cura"
#~ msgstr "Dodaj drukarkę do Cura"

#~ msgctxt "@title:tab"
#~ msgid ""
#~ "Select the printer you want to use from the list below.\n"
#~ "\n"
#~ "If your printer is not in the list, use the \"Custom FFF Printer\" from the \"Custom\" category and adjust the settings to match your printer in the next dialog."
#~ msgstr ""
#~ "Z poniższej listy wybierz drukarkę, której chcesz użyć.\n"
#~ "\n"
#~ "Jeśli drukarki nie ma na liście, użyj „Niestandardowa drukarka FFF” z kategorii „Niestandardowy” i dostosuj ustawienia, aby pasowały do drukarki w następnym oknie dialogowym."

#~ msgctxt "@label"
#~ msgid "Printer Name"
#~ msgstr "Nazwa drukarki"

#~ msgctxt "@action:button"
#~ msgid "Add Printer"
#~ msgstr "Dodaj drukarkę"

#~ msgid "Modify G-Code"
#~ msgstr "Modyfikuj G-Code"

#~ msgctxt "@info:status"
#~ msgid "Nothing to slice because none of the models fit the build volume. Please scale or rotate models to fit."
#~ msgstr "Nic do pocięcia, ponieważ żaden z modeli nie pasuje do obszaru roboczego. Proszę o przeskalowanie lub obrócenie modelu, żeby pasował."

#~ msgctxt "@info:status"
#~ msgid "The selected material is incompatible with the selected machine or configuration."
#~ msgstr "Wybrany materiał jest niezgodny z wybranym urządzeniem lub konfiguracją."

#~ msgctxt "@info:title"
#~ msgid "Incompatible Material"
#~ msgstr "Niekompatybilny Materiał"

#~ msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
#~ msgid "Failed to import profile from <filename>{0}</filename>: <message>{1}</message>"
#~ msgstr "Nie udało się zaimportować profilu z <filename>{0}</filename>: <message>{1}</message>"

#~ msgctxt "@title"
#~ msgid "Toolbox"
#~ msgstr "Narzędzia"

#~ msgctxt "@label"
#~ msgid "Not available"
#~ msgstr "Niedostępny"

#~ msgctxt "@label"
#~ msgid "Unreachable"
#~ msgstr "Nieosiągalny"

#~ msgctxt "@label"
#~ msgid "Available"
#~ msgstr "Dostępny"

#~ msgctxt "@label:status"
#~ msgid "Preparing"
#~ msgstr "Przygotowywanie"

#~ msgctxt "@label:status"
#~ msgid "Pausing"
#~ msgstr "Wstrzymywanie"

#~ msgctxt "@label:status"
#~ msgid "Resuming"
#~ msgstr "Wznawianie"

#~ msgctxt "@label"
#~ msgid "Waiting for: Unavailable printer"
#~ msgstr "Oczekiwanie na: Niedostępną drukarkę"

#~ msgctxt "@label"
#~ msgid "Waiting for: First available"
#~ msgstr "Oczekiwanie na: Pierwszą dostępną"

#~ msgctxt "@label"
#~ msgid "Waiting for: "
#~ msgstr "Oczekiwanie na: "

#~ msgctxt "@label link to connect manager"
#~ msgid "Manage queue"
#~ msgstr "Zarządzaj kolejką"

#~ msgctxt "@label"
#~ msgid "Printing"
#~ msgstr "Drukowanie"

#~ msgctxt "@label link to connect manager"
#~ msgid "Manage printers"
#~ msgstr "Zarządzaj drukarkami"

#~ msgctxt "@action:button"
#~ msgid "Activate Configuration"
#~ msgstr "Uaktywnij konfigurację"

#~ msgctxt "@info:tooltip"
#~ msgid "Load the configuration of the printer into Cura"
#~ msgstr "Załaduj konfigurację drukarki do Cura"

#~ msgctxt "@label"
#~ msgid "Show Travels"
#~ msgstr "Pokaż ruch jałowy"

#~ msgctxt "@label"
#~ msgid "Show Helpers"
#~ msgstr "Pokaż pomocnik"

#~ msgctxt "@label"
#~ msgid "Show Shell"
#~ msgstr "Pokaż powłokę"

#~ msgctxt "@label"
#~ msgid "Show Infill"
#~ msgstr "Pokaż wypełnienie"

#~ msgctxt "@text:window"
#~ msgid "I don't want to send these data"
#~ msgstr "Nie chcę przesyłać tych danych"

#~ msgctxt "@text:window"
#~ msgid "Allow sending these data to Ultimaker and help us improve Cura"
#~ msgstr "Zezwól na przesyłanie tych danych do Ultimaker i pomóż nam ulepszać Cura"

#~ msgctxt "@label"
#~ msgid "Printer type:"
#~ msgstr "Typ drukarki:"

#~ msgctxt "@label"
#~ msgid "Connection:"
#~ msgstr "Połączenie:"

#~ msgctxt "@label"
#~ msgid "State:"
#~ msgstr "Stan:"

#~ msgctxt "@label:MonitorStatus"
#~ msgid "Waiting for a printjob"
#~ msgstr "Oczekiwanie na zadanie drukowania"

#~ msgctxt "@label:MonitorStatus"
#~ msgid "Waiting for someone to clear the build plate"
#~ msgstr "Oczekiwanie na wyczyszczenie stołu roboczego"

#~ msgctxt "@label:MonitorStatus"
#~ msgid "Aborting print..."
#~ msgstr "Przerywanie drukowania..."

#~ msgctxt "@label"
#~ msgid "Protected profiles"
#~ msgstr "Chronione profile"

#~ msgctxt "@label"
#~ msgid "Printer Name:"
#~ msgstr "Nazwa drukarki:"

#~ msgctxt "@label"
#~ msgid "Profile:"
#~ msgstr "Profil:"

#~ msgctxt "@label:textbox"
#~ msgid "Search..."
#~ msgstr "Szukanie..."

#~ msgctxt "@action:inmenu"
#~ msgid "Collapse All"
#~ msgstr "Schowaj wszystkie"

#~ msgctxt "@action:inmenu"
#~ msgid "Expand All"
#~ msgstr "Rozwiń wszystkie"

#~ msgctxt "@label:header configurations"
#~ msgid "Available configurations"
#~ msgstr "Dostępne konfiguracje"

#~ msgctxt "@label:extruder label"
#~ msgid "Extruder"
#~ msgstr "Ekstruder"

#~ msgctxt "@label:extruder label"
#~ msgid "Yes"
#~ msgstr "Tak"

#~ msgctxt "@label:extruder label"
#~ msgid "No"
#~ msgstr "Nie"

#~ msgctxt "@label:listbox"
#~ msgid "Print Setup"
#~ msgstr "Ustawienia druku"

#~ msgctxt "@label:listbox"
#~ msgid ""
#~ "Print Setup disabled\n"
#~ "G-code files cannot be modified"
#~ msgstr ""
#~ "Konfiguracja wydruku jest wyłączona\n"
#~ "Pliki G-code nie mogą zostać zmodyfikowane"

#~ msgctxt "@label Hours and minutes"
#~ msgid "00h 00min"
#~ msgstr "00godz. 00min."

#~ msgctxt "@tooltip"
#~ msgid "Time specification"
#~ msgstr "Specyfikacja czasu"

#~ msgctxt "@label"
#~ msgid "Cost specification"
#~ msgstr "Szacowanie kosztów"

#~ msgctxt "@label"
#~ msgid "Total:"
#~ msgstr "Razem:"

#~ msgctxt "@tooltip"
#~ msgid "<b>Recommended Print Setup</b><br/><br/>Print with the recommended settings for the selected printer, material and quality."
#~ msgstr "<b>Zalecana konfiguracja wydruku</b><br/><br/>Drukowanie z zalecanymi ustawieniami dla wybranej drukarki, materiału i jakości."

#~ msgctxt "@tooltip"
#~ msgid "<b>Custom Print Setup</b><br/><br/>Print with finegrained control over every last bit of the slicing process."
#~ msgstr "<b>Niestandardowa konfiguracja wydruku</b><br/><br/>Drukowanie z precyzyjną kontrolą nad każdym elementem procesu cięcia."

#~ msgctxt "@action:inmenu menubar:help"
#~ msgid "Show Engine &Log..."
#~ msgstr "Pokaż &dziennik silnika..."

#~ msgctxt "@action:menu"
#~ msgid "Browse packages..."
#~ msgstr "Przeglądaj pakiety..."

#~ msgctxt "@action:inmenu menubar:view"
#~ msgid "Expand/Collapse Sidebar"
#~ msgstr "Rozłóż/Schowaj Pasek Boczny"

#~ msgctxt "@label:PrintjobStatus"
#~ msgid "Please load a 3D model"
#~ msgstr "Proszę załaduj model 3D"

#~ msgctxt "@label:PrintjobStatus"
#~ msgid "Ready to slice"
#~ msgstr "Gotowy do cięcia"

#~ msgctxt "@label:PrintjobStatus %1 is target operation"
#~ msgid "Ready to %1"
#~ msgstr "Gotowy do %1"

#~ msgctxt "@label:PrintjobStatus"
#~ msgid "Slicing unavailable"
#~ msgstr "Cięcie niedostępne"

#~ msgctxt "@info:tooltip"
#~ msgid "Slice current printjob"
#~ msgstr "Potnij aktualny wydruk"

#~ msgctxt "@info:tooltip"
#~ msgid "Cancel slicing process"
#~ msgstr "Przerwij proces cięcia"

#~ msgctxt "@label:Printjob"
#~ msgid "Prepare"
#~ msgstr "Przygotuj"

#~ msgctxt "@label:Printjob"
#~ msgid "Cancel"
#~ msgstr "Anuluj"

#~ msgctxt "@info:tooltip"
#~ msgid "Select the active output device"
#~ msgstr "Wybierz aktywne urządzenie wyjściowe"

#~ msgctxt "@title:menu"
#~ msgid "&View"
#~ msgstr "&Widok"

#~ msgctxt "@title:menu"
#~ msgid "&Settings"
#~ msgstr "&Ustawienia"

#~ msgctxt "@title:menu menubar:toplevel"
#~ msgid "&Toolbox"
#~ msgstr "&Narzędzia"

#~ msgctxt "@action:button"
#~ msgid "Open File"
#~ msgstr "Otwórz plik"

#~ msgctxt "@tooltip"
#~ msgid "This quality profile is not available for you current material and nozzle configuration. Please change these to enable this quality profile"
#~ msgstr "Ten profil jakości nie jest dostępny dla wybranego materiału i konfiguracji dyszy. Proszę to zmienić, aby włączyć ten profil jakości"

#~ msgctxt "@label"
#~ msgid "Print Speed"
#~ msgstr "Prędkość Druku"

#~ msgctxt "@label"
#~ msgid "Slower"
#~ msgstr "Wolniej"

#~ msgctxt "@label"
#~ msgid "Faster"
#~ msgstr "Szybciej"

#~ msgctxt "@label"
#~ msgid "Enable gradual"
#~ msgstr "Włącz stopniowane"

#~ msgctxt "@label"
#~ msgid "Generate Support"
#~ msgstr "Generuj podpory"

#~ msgctxt "@label"
#~ msgid "Build Plate Adhesion"
#~ msgstr "Popraw przycz. modelu"

#~ msgctxt "@label"
#~ msgid "Need help improving your prints?<br>Read the <a href='%1'>Ultimaker Troubleshooting Guides</a>"
#~ msgstr "Potrzebujesz pomocy w ulepszaniu wydruków?<br>Przeczytaj <a href='%1'>instrukcje dotyczące rozwiązywania problemów</a>"

#~ msgctxt "@title:window"
#~ msgid "Engine Log"
#~ msgstr "Dziennik silnika"

#~ msgctxt "@label"
#~ msgid "Printer type"
#~ msgstr "Typ drukarki"

#~ msgctxt "@label"
#~ msgid "Use glue with this material combination"
#~ msgstr "Użyj kleju z tą kombinacją materiałów"

#~ msgctxt "@label"
#~ msgid "Check compatibility"
#~ msgstr "Sprawdź kompatybilność"

#~ msgctxt "@tooltip"
#~ msgid "Click to check the material compatibility on Ultimaker.com."
#~ msgstr "Kliknij, aby sprawdzić zgodność materiału na Ultimaker.com."

#~ msgctxt "description"
#~ msgid "Shows changes since latest checked version."
#~ msgstr "Pokazuje zmiany od ostatniej sprawdzonej wersji."

#~ msgctxt "name"
#~ msgid "Changelog"
#~ msgstr "Lista zmian"

#~ msgctxt "description"
#~ msgid "Create a flattend quality changes profile."
#~ msgstr "Utwórz charakterystyczny profil zmiany jakości."

#~ msgctxt "name"
#~ msgid "Profile flatener"
#~ msgstr "Charakterystyka Profilu"

#~ msgctxt "description"
#~ msgid "Ask the user once if he/she agrees with our license."
#~ msgstr "Zapytaj użytkownika jednokrotnie, czy zgadza się z warunkami naszej licencji."

#~ msgctxt "name"
#~ msgid "UserAgreement"
#~ msgstr "ZgodaUżytkownika"

#~ msgctxt "@warning:status"
#~ msgid "Please generate G-code before saving."
#~ msgstr "Wygeneruj G-code przed zapisem."

#~ msgctxt "@action"
#~ msgid "Upgrade Firmware"
#~ msgstr "Uaktualnij oprogramowanie układowe"

#~ msgctxt "@label unknown material"
#~ msgid "Unknown"
#~ msgstr "Nieznany"

#~ msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
#~ msgid "No custom profile to import in file <filename>{0}</filename>"
#~ msgstr "Brak niestandardowego profilu do zaimportowania do pliku <filename>{0}</filename>"

#~ msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
#~ msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
#~ msgstr "Ten profil <filename>{0}</filename> zawiera błędne dane, nie można go zaimportować."

#~ msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
#~ msgid "The machine defined in profile <filename>{0}</filename> ({1}) doesn't match with your current machine ({2}), could not import it."
#~ msgstr "Maszyna zdefiniowana w profilu <filename>{0}</filename> ({1}) nie zgadza się z obecnie wybraną maszyną ({2}), nie można tego zaimportować."

#~ msgctxt "@title:window"
#~ msgid "Confirm uninstall "
#~ msgstr "Potwierdź odinstalowanie "

#~ msgctxt "@label Print estimates: m for meters, g for grams, %4 is currency and %3 is print cost"
#~ msgid "%1m / ~ %2g / ~ %4 %3"
#~ msgstr "%1m / ~ %2g / ~ %4 %3"

#~ msgctxt "@label Print estimates: m for meters, g for grams"
#~ msgid "%1m / ~ %2g"
#~ msgstr "%1m / ~ %2g"

#~ msgctxt "@title"
#~ msgid "Upgrade Firmware"
#~ msgstr "Uaktualnij oprogramowanie"

#~ msgctxt "@action:button"
#~ msgid "Print with Doodle3D WiFi-Box"
#~ msgstr "Drukuj z Doodle3D WiFi-Box"

#~ msgctxt "@properties:tooltip"
#~ msgid "Print with Doodle3D WiFi-Box"
#~ msgstr "Drukuj z Doodle3D WiFi-Box"

#~ msgctxt "@info:status"
#~ msgid "Connecting to Doodle3D Connect"
#~ msgstr "Łączenie z Doodle3D Connect"

#~ msgctxt "@info:status"
#~ msgid "Sending data to Doodle3D Connect"
#~ msgstr "Wysyłanie danych do Doodle3D Connect"

#~ msgctxt "@info:status"
#~ msgid "Unable to send data to Doodle3D Connect. Is another job still active?"
#~ msgstr "Nie można wysłać danych do Doodle3D Connect. Czy inne zadanie jest aktywne?"

#~ msgctxt "@info:status"
#~ msgid "Storing data on Doodle3D Connect"
#~ msgstr "Przetrzymywanie danych na Doodle3D Connect"

#~ msgctxt "@info:status"
#~ msgid "File sent to Doodle3D Connect"
#~ msgstr "Plik wysłany do Doodle3D Connect"

#~ msgctxt "@action:button"
#~ msgid "Open Connect..."
#~ msgstr "Otwórz Connect..."

#~ msgctxt "@info:tooltip"
#~ msgid "Open the Doodle3D Connect web interface"
#~ msgstr "Otwórz interfejs Doodle3D Connect"

#~ msgctxt "@item:inlistbox"
#~ msgid "Blender file"
#~ msgstr "Plik Blender"

#~ msgctxt "@info:status"
#~ msgid ""
#~ "Could not export using \"{}\" quality!\n"
#~ "Felt back to \"{}\"."
#~ msgstr ""
#~ "Nie można wyeksportować używając \"{}\" jakości!\n"
#~ "Powrócono do \"{}\"."

#~ msgctxt "@label"
#~ msgid "This printer is not set up to host a group of Ultimaker 3 printers."
#~ msgstr "Ta drukarka nie jest skonfigurowana do zarządzania grupą drukarek Ultimaker 3."

#~ msgctxt "@label"
#~ msgid "This printer is the host for a group of %1 Ultimaker 3 printers."
#~ msgstr "Ta drukarka jest gospodarzem grupy %1 drukarek Ultimaker 3."

#~ msgctxt "@label: arg 1 is group name"
#~ msgid "%1 is not set up to host a group of connected Ultimaker 3 printers"
#~ msgstr "%1 nie została ustawiona do hostowania grupy podłączonych drukarek Ultimaker 3"

#~ msgctxt "@label link to connect manager"
#~ msgid "Add/Remove printers"
#~ msgstr "Dodaj/Usuń drukarki"

#~ msgctxt "@info:tooltip"
#~ msgid "Opens the print jobs page with your default web browser."
#~ msgstr "Otwiera stronę zadań drukowania w twojej domyślnej przeglądarce sieciowej."

#~ msgctxt "@action:button"
#~ msgid "View print jobs"
#~ msgstr "Zobacz zadania drukowania"

#~ msgctxt "@label:status"
#~ msgid "Preparing to print"
#~ msgstr "Przygotowywanie do drukowania"

#~ msgctxt "@label:status"
#~ msgid "Available"
#~ msgstr "Dostępna"

#~ msgctxt "@label:status"
#~ msgid "Lost connection with the printer"
#~ msgstr "Utracono połączenie z drukarką"

#~ msgctxt "@label:status"
#~ msgid "Unknown"
#~ msgstr "Nieznane"

#~ msgctxt "@label:status"
#~ msgid "Disabled"
#~ msgstr "Wyłączona"

#~ msgctxt "@label:status"
#~ msgid "Reserved"
#~ msgstr "Zajęta"

#~ msgctxt "@label"
#~ msgid "Preparing to print"
#~ msgstr "Przygotowywanie do druku"

#~ msgctxt "@label:status"
#~ msgid "Print aborted"
#~ msgstr "Drukowanie zostaje przerwane"

#~ msgctxt "@label"
#~ msgid "Not accepting print jobs"
#~ msgstr "Nie akceptuje zadań drukowania"

#~ msgctxt "@label"
#~ msgid "Finishes at: "
#~ msgstr "Wykończenia na: "

#~ msgctxt "@label"
#~ msgid "Clear build plate"
#~ msgstr "Oczyść platformę roboczą"

#~ msgctxt "@label"
#~ msgid "Waiting for configuration change"
#~ msgstr "Oczekuje na zmianę konfiguracji"

#~ msgctxt "@title"
#~ msgid "Print jobs"
#~ msgstr "Zadania drukowania"

#~ msgctxt "@label:title"
#~ msgid "Printers"
#~ msgstr "Drukarki"

#~ msgctxt "@action:button"
#~ msgid "View printers"
#~ msgstr "Zobacz drukarki"

#~ msgctxt "@label:"
#~ msgid "Pause"
#~ msgstr "Wstrzymaj"

#~ msgctxt "@label:"
#~ msgid "Resume"
#~ msgstr "Wznów"

#~ msgctxt "@label:"
#~ msgid "Abort Print"
#~ msgstr "Przerwij wydruk"

#~ msgctxt "@option:openProject"
#~ msgid "Always ask"
#~ msgstr "Zawsze pytaj"

#~ msgctxt "@label"
#~ msgid "Override Profile"
#~ msgstr "Nadpisz profil"

#~ msgctxt "@info:tooltip"
#~ msgid "Should newly loaded models be arranged on the build plate? Used in conjunction with multi build plate (EXPERIMENTAL)"
#~ msgstr "Czy nowo załadowane modele powinny zostać rozłożone na platformie roboczej? Używane w połączeniu z multi platformą roboczą (EKSPERYMENTALNE)"

#~ msgctxt "@option:check"
#~ msgid "Do not arrange objects on load"
#~ msgstr "Nie układaj obiektów podczas ładowania"

#~ msgctxt "@action:inmenu menubar:file"
#~ msgid "&Save Selection to File"
#~ msgstr "Z&apisz wybór w pliku"

#~ msgctxt "@title:menu menubar:file"
#~ msgid "Save &As..."
#~ msgstr "Zapisz &jako..."

#~ msgctxt "@title:menu menubar:file"
#~ msgid "Save &Project..."
#~ msgstr "Zapisz &Project..."

#~ msgctxt "description"
#~ msgid "Accepts G-Code and sends them over WiFi to a Doodle3D WiFi-Box."
#~ msgstr "Akceptuje G-Code i wysyła go przez WiFi do Doodle3D WiFi-Box."

#~ msgctxt "name"
#~ msgid "Doodle3D WiFi-Box"
#~ msgstr "Doodle3D WiFi-Box"

#~ msgctxt "description"
#~ msgid "Provides an edit window for direct script editing."
#~ msgstr "Zapewnia okno edycji dla bezpośredniego edytowania skryptów."

#~ msgctxt "name"
#~ msgid "Live scripting tool"
#~ msgstr "Narzędzie pisania skryptów na żywo."

#~ msgctxt "description"
#~ msgid "Helps to open Blender files directly in Cura."
#~ msgstr "Pomaga w otwieraniu plików Blender bezpośrednio w Cura."

#~ msgctxt "name"
#~ msgid "Blender Integration (experimental)"
#~ msgstr "Integracja z Blenderem (eksperymentalny)"

#~ msgctxt "@info:title"
#~ msgid "Model Checker Warning"
#~ msgstr "Ostrzeżenie Sprawdzacza Modelu"

#~ msgctxt "@info:status"
#~ msgid ""
#~ "Some models may not be printed optimally due to object size and chosen material for models: {model_names}.\n"
#~ "Tips that may be useful to improve the print quality:\n"
#~ "1) Use rounded corners.\n"
#~ "2) Turn the fan off (only if there are no tiny details on the model).\n"
#~ "3) Use a different material."
#~ msgstr ""
#~ "Niektóre modele nie będą drukowane optymalnie z powodu rozmiaru obiektu i wybranych materiałów dla modeli: {model_names}.\n"
#~ "Porady, które mogą się przydać, aby poprawić jakość wydruku:\n"
#~ "1) Używaj zaokrąglonych narożników.\n"
#~ "2) Wyłącz wentylator (tylko jeśli model nie ma małych detali).\n"
#~ "3) Użyj innego materiału."

#~ msgctxt "@info:status"
#~ msgid "SolidWorks reported errors while opening your file. We recommend to solve these issues inside SolidWorks itself."
#~ msgstr "SolidWorks zgłosił błędy podczas otwierania twojego pliku. Zalecamy rozwiązanie tych problemów w samym SolidWorks."

#~ msgctxt "@info:status"
#~ msgid ""
#~ "Found no models inside your drawing. Could you please check its content again and make sure one part or assembly is inside?\n"
#~ "\n"
#~ "Thanks!"
#~ msgstr ""
#~ "Nie znaleziono modeli wewnątrz twojego rysunku. Czy mógłbyś sprawdzić jego zawartość ponownie i upewnić się, że znajduje się tam jedna część lub złożenie?\n"
#~ "\n"
#~ "Dziękuję!."

#~ msgctxt "@info:status"
#~ msgid ""
#~ "Found more than one part or assembly inside your drawing. We currently only support drawings with exactly one part or assembly inside.\n"
#~ "\n"
#~ "Sorry!"
#~ msgstr ""
#~ "Znaleziono więcej niż jedną część lub złożenie wewnątrz rysunku. Obecnie obsługujemy tylko rysunki z dokładnie jedną częścią lub złożeniem.\n"
#~ "\n"
#~ "Przepraszamy!"

#~ msgctxt "@item:inlistbox"
#~ msgid "SolidWorks part file"
#~ msgstr "Plik części SolidWorks"

#~ msgctxt "@item:inlistbox"
#~ msgid "SolidWorks assembly file"
#~ msgstr "Plik złożenia SolidWorks"

#~ msgctxt "@item:inlistbox"
#~ msgid "SolidWorks drawing file"
#~ msgstr "Plik rysunku SolidWorks"

#~ msgctxt "@info:status"
#~ msgid ""
#~ "Dear customer,\n"
#~ "We could not find a valid installation of SolidWorks on your system. That means that either SolidWorks is not installed or you don't own an valid license. Please make sure that running SolidWorks itself works without issues and/or contact your ICT.\n"
#~ "\n"
#~ "With kind regards\n"
#~ " - Thomas Karl Pietrowski"
#~ msgstr ""
#~ "Szanowny kliencie,\n"
#~ "Nie mogliśmy znaleźć poprawnej instalacji SolidWorks w twoim systemie. To oznacza, że albo nie masz zainstalowanego SolidWorks, albo nie masz ważnej licencji. Proszę upewnić się, że uruchomiony SolidWorks działa bez żadnych problemów i/lub skontaktuj się z ICT.\n"
#~ "\n"
#~ "Z wyrazami szacunku,\n"
#~ " - Thomas Karl Pietrowski"

#~ msgctxt "@info:status"
#~ msgid ""
#~ "Dear customer,\n"
#~ "You are currently running this plugin on an operating system other than Windows. This plugin will only work on Windows with SolidWorks installed, including an valid license. Please install this plugin on a Windows machine with SolidWorks installed.\n"
#~ "\n"
#~ "With kind regards\n"
#~ " - Thomas Karl Pietrowski"
#~ msgstr ""
#~ "Szanowny kliencie,\n"
#~ "Używasz aktualnie tego pluginu na innym systemie niż Windows. Ten plugin działa tylko w Windows razem z zainstalowanym SolidWorks, włączając w to poprawną licencję. Proszę zainstalować ten plugin na maszynie z systemem Windows z zainstalowanym SolidWorks.\n"
#~ "Z wyrazami szacunku,\n"
#~ " - Thomas Karl Pietrowski"

#~ msgid "Configure"
#~ msgstr "Konfiguruj"

#~ msgid "Installation guide for SolidWorks macro"
#~ msgstr "Instalacja poradnika dla skrótów SolidWorks"

#~ msgctxt "@action:button"
#~ msgid "Disable"
#~ msgstr "Wyłącz"

#~ msgctxt "@action:tooltip"
#~ msgid "Don't allow Cura to send anonymized usage statistics. You can enable it again in the preferences."
#~ msgstr "Nie zezwalaj Cura na wysyłanie anonimowych danych statystycznych. Możesz to włączyć ponownie w preferencjach."

#~ msgid "Install"
#~ msgstr "Zainstaluj"

#~ msgid "Failed to copy Siemens NX plugins files. Please check your UGII_USER_DIR. It is not set to a directory."
#~ msgstr "Nie udało się skopiować plików pluginu Siemens NX. Proszę sprawdź twój UGII_USER_DIR. Nie jest ustawiony do folderu."

#~ msgid "Successfully installed Siemens NX Cura plugin."
#~ msgstr "Udało się zainstalować plugin Cura Siemens NX."

#~ msgid "Failed to copy Siemens NX plugins files. Please check your UGII_USER_DIR."
#~ msgstr "Nie udało się skopiować plików pluginu Siemens NX. Proszę sprawdź twój UGII_USER_DIR."

#~ msgid "Failed to install Siemens NX plugin. Could not set environment variable UGII_USER_DIR for Siemens NX."
#~ msgstr "Nie udało się zainstalować pluginu Siemens NX. Nie można ustawić zmiennej środowiskowej UGII_USER_DIR dla Siemens NX."

#~ msgctxt "@info:status"
#~ msgid "Failed to get plugin ID from <filename>{0}</filename>"
#~ msgstr "Nie udało się uzyskać ID wtyczki z <filename>{0}</filename>"

#~ msgctxt "@info:tile"
#~ msgid "Warning"
#~ msgstr "Ostrzeżenie"

#~ msgctxt "@window:title"
#~ msgid "Plugin browser"
#~ msgstr "Przeglądarka wtyczek"

#~ msgctxt "@label"
#~ msgid "Ultimaker 3"
#~ msgstr "Ultimaker 3"

#~ msgctxt "@label"
#~ msgid "Ultimaker 3 Extended"
#~ msgstr "Ultimaker 3 Extended"

#~ msgctxt "@title:window"
#~ msgid "SolidWorks: Export wizard"
#~ msgstr "SolidWorks: Kreator eksportu"

#~ msgctxt "@action:label"
#~ msgid "Quality:"
#~ msgstr "Jakość:"

#~ msgctxt "@option:curaSolidworksStlQuality"
#~ msgid "Fine (3D-printing)"
#~ msgstr "Dobra (druk 3D)"

#~ msgctxt "@option:curaSolidworksStlQuality"
#~ msgid "Coarse (3D-printing)"
#~ msgstr "Słaba (druk 3D)"

#~ msgctxt "@option:curaSolidworksStlQuality"
#~ msgid "Fine (SolidWorks)"
#~ msgstr "Dobra (SolidWorks)"

#~ msgctxt "@option:curaSolidworksStlQuality"
#~ msgid "Coarse (SolidWorks)"
#~ msgstr "Słaba (Solidworks)"

#~ msgctxt "@text:window"
#~ msgid "Show this dialog again"
#~ msgstr "Pokaż to okno ponownie"

#~ msgctxt "@action:button"
#~ msgid "Continue"
#~ msgstr "Kontynuuj"

#~ msgctxt "@action:button"
#~ msgid "Abort"
#~ msgstr "Przerwij"

#~ msgctxt "@title:window"
#~ msgid "How to install Cura SolidWorks macro"
#~ msgstr "Jak zainstalować skróty SolidWorks dla Cura"

#~ msgctxt "@description:label"
#~ msgid "Steps:"
#~ msgstr "Kroki:"

#~ msgctxt "@action:button"
#~ msgid ""
#~ "Open the directory\n"
#~ "with macro and icon"
#~ msgstr ""
#~ "Otwórz folder\n"
#~ "ze skrótem i ikoną"

#~ msgctxt "@description:label"
#~ msgid "Instructions:"
#~ msgstr "Instrukcje:"

#~ msgctxt "@action:playpause"
#~ msgid "Play"
#~ msgstr "Odtwórz"

#~ msgctxt "@action:playpause"
#~ msgid "Pause"
#~ msgstr "Zatrzymaj"

#~ msgctxt "@action:button"
#~ msgid "Previous Step"
#~ msgstr "Poprzedni Krok"

#~ msgctxt "@action:button"
#~ msgid "Done"
#~ msgstr "Zrobione"

#~ msgctxt "@action:button"
#~ msgid "Next Step"
#~ msgstr "Następny Krok"

#~ msgctxt "@title:window"
#~ msgid "SolidWorks plugin: Configuration"
#~ msgstr "Plugin SolidWorks: Konfiguracja"

#~ msgctxt "@title:tab"
#~ msgid "Conversion settings"
#~ msgstr "Konwersja ustawień"

#~ msgctxt "@label"
#~ msgid "First choice:"
#~ msgstr "Pierwszy wybór:"

#~ msgctxt "@text:menu"
#~ msgid "Latest installed version (Recommended)"
#~ msgstr "Ostatnio zainstalowana wersja (Rekomendowana)"

#~ msgctxt "@text:menu"
#~ msgid "Default version"
#~ msgstr "Domyślna wersja"

#~ msgctxt "@label"
#~ msgid "Show wizard before opening SolidWorks files"
#~ msgstr "Pokaż konfigurator przed otworzeniem plików SolidWorks"

#~ msgctxt "@label"
#~ msgid "Automatically rotate opened file into normed orientation"
#~ msgstr "Automatycznie obracaj otworzone pliki do unormowanej pozycji"

#~ msgctxt "@title:tab"
#~ msgid "Installation(s)"
#~ msgstr "Instalacja(-e)"

#~ msgctxt "@label"
#~ msgid "COM service found"
#~ msgstr "Usługa COM znaleziona"

#~ msgctxt "@label"
#~ msgid "Executable found"
#~ msgstr "Znaleziono plik wykonywalny"

#~ msgctxt "@label"
#~ msgid "COM starting"
#~ msgstr "Uruchamianie COM"

#~ msgctxt "@label"
#~ msgid "Revision number"
#~ msgstr "Numer wydania"

#~ msgctxt "@label"
#~ msgid "Functions available"
#~ msgstr "Dostępne funkcje"

#~ msgctxt "@label (%1 is object name)"
#~ msgid "The new material diameter is set to %1 mm, which is not compatible to the current machine. Do you wish to continue?"
#~ msgstr "Nowa średnica materiał jest ustawiona na %1 mm, co nie jest kompatybilne z obecną maszyną. Czy chciałbyś kontynuować?"

#~ msgctxt "@action:menu"
#~ msgid "Browse plugins..."
#~ msgstr "Przeglądaj wtyczki..."

#~ msgctxt "@title:menu menubar:toplevel"
#~ msgid "P&lugins"
#~ msgstr "W&tyczki"

#~ msgctxt "@window:title"
#~ msgid "Install Plugin"
#~ msgstr "Zainstaluj Wtyczkę"

#~ msgctxt "description"
#~ msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc)"
#~ msgstr "Zapewnia możliwość zmiany ustawień maszyny (tj. obszaru roboczego, rozmiaru dyszy itd.)"

#~ msgctxt "description"
#~ msgid "Manages network connections to Ultimaker 3 printers"
#~ msgstr "Zarządza połączeniem sieciowym z drukarką Ultimaker 3"

#~ msgctxt "description"
#~ msgid "Gives you the possibility to open certain files using SolidWorks itself. Conversion is done by this plugin and additional optimizations."
#~ msgstr "Daje Tobie możliwość otwierania plików używają samego SolidWorks. Konwersja jest wykonywana przez ten plugin i dodatkowo optymalizowana."

#~ msgctxt "name"
#~ msgid "SolidWorks Integration"
#~ msgstr "Integracja z SolidWorks"

#~ msgctxt "description"
#~ msgid "Automatically saves Preferences, Machines and Profiles after changes."
#~ msgstr "Automatycznie zapisuje Preferencje, Maszyny i Profile po zmianie."

#~ msgctxt "name"
#~ msgid "Auto Save"
#~ msgstr "Auto Zapis"

#~ msgctxt "description"
#~ msgid "Helps you to install an 'export to Cura' button in Siemens NX."
#~ msgstr "Pomaga zainstalować przycisk 'eksportuj do Cura' w Siemens NX."

#~ msgctxt "name"
#~ msgid "Siemens NX Integration"
#~ msgstr "Integracja z Siemens NX"

#~ msgctxt "description"
#~ msgid "Find, manage and install new plugins."
#~ msgstr "Szuka, zarządza i instaluje nowe wtyczki."

#~ msgctxt "name"
#~ msgid "Plugin Browser"
#~ msgstr "Przeglądarka Wtyczek"

#~ msgctxt "description"
#~ msgid "Ask the user once if he/she agrees with our license"
#~ msgstr "Pyta użytkownika czy zgadza się z naszą licencją"

#~ msgctxt "description"
#~ msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc)"
#~ msgstr "Zapewnia czynności maszyny dla maszyn Ultimaker (tj. poziomowanie stołu, wybór ulepszeń, itd.)"

#~ msgctxt "@item:inlistbox"
#~ msgid "GCode File"
#~ msgstr "Plik GCode"

#~ msgctxt "@info:status"
#~ msgid "Unable to start a new job because the printer is busy or not connected."
#~ msgstr "Nie można uruchomić nowego zadania, ponieważ drukarka jest zajęta lub nie jest podłączona."

#~ msgctxt "@info:title"
#~ msgid "Printer Unavailable"
#~ msgstr "Drukarka Niedostępna"

#~ msgctxt "@info:status"
#~ msgid "This printer does not support USB printing because it uses UltiGCode flavor."
#~ msgstr "Ta drukarka nie obsługuje drukowania USB, ponieważ korzysta z UltiGCode."

#~ msgctxt "@info:title"
#~ msgid "USB Printing"
#~ msgstr "Drukowanie przez USB"

#~ msgctxt "@info:status"
#~ msgid "Unable to start a new job because the printer does not support usb printing."
#~ msgstr "Nie można uruchomić nowego zadania, ponieważ drukarka nie obsługuje drukowania poprzez USB."

#~ msgctxt "@info"
#~ msgid "Unable to update firmware because there are no printers connected."
#~ msgstr "Nie można zaktualizować oprogramowania, ponieważ nie ma podłączonych drukarek."

#~ msgctxt "@info"
#~ msgid "Could not find firmware required for the printer at %s."
#~ msgstr "Nie znaleziono oprogramowania wymaganego dla drukarki w %s."

#~ msgctxt "@info:title"
#~ msgid "Printer Firmware"
#~ msgstr "Oprogramowanie Drukarki"

#~ msgctxt "@info:title"
#~ msgid "Connection status"
#~ msgstr "Status połączenia"

#~ msgctxt "@info:title"
#~ msgid "Connection Status"
#~ msgstr "Status połączenia"

#~ msgctxt "@info:status"
#~ msgid "Access request was denied on the printer."
#~ msgstr "Żądanie dostępu zostało odrzucone na drukarce."

#~ msgctxt "@info:status"
#~ msgid "Access request failed due to a timeout."
#~ msgstr "Żądanie dostępu nie powiodło się z powodu limitu czasu."

#~ msgctxt "@info:status"
#~ msgid "The connection with the network was lost."
#~ msgstr "Połączenie z siecią zostało utracone."

#~ msgctxt "@info:status"
#~ msgid "The connection with the printer was lost. Check your printer to see if it is connected."
#~ msgstr "Połączenie z drukarką zostało utracone. Sprawdź, czy drukarka jest podłączona."

#~ msgctxt "@info:status"
#~ msgid "Unable to start a new print job, printer is busy. Current printer status is %s."
#~ msgstr "Nie można uruchomić nowego zadania, drukarka jest zajęta. Aktualny stan drukarki to %s."

#~ msgctxt "@info:title"
#~ msgid "Printer Status"
#~ msgstr "Status Drukarki"

#~ msgctxt "@info:status"
#~ msgid "Unable to start a new print job. No Printcore loaded in slot {0}"
#~ msgstr "Nie można uruchomić nowego zadania. Brak Printcore w slocie {0}"

#~ msgctxt "@info:status"
#~ msgid "Unable to start a new print job. No material loaded in slot {0}"
#~ msgstr "Nie można uruchomić nowego zadania. Brak materiału w slocie {0}"

#~ msgctxt "@label"
#~ msgid "Not enough material for spool {0}."
#~ msgstr "Nie ma wystarczającej ilości materiału na szpuli {0}."

#~ msgctxt "@label"
#~ msgid "Different PrintCore (Cura: {0}, Printer: {1}) selected for extruder {2}"
#~ msgstr "Różne PrintCore (Cura: {0}, Drukarka: {1}) wybrane dla ekstrudera {2}"

#~ msgctxt "@label"
#~ msgid "PrintCore {0} is not properly calibrated. XY calibration needs to be performed on the printer."
#~ msgstr "PrintCore {0} nie jest poprawnie skalibrowany. Kalibracja XY musi zostać wykonana na tej drukarce."

#~ msgctxt "@info:status"
#~ msgid "Unable to send data to printer. Is another job still active?"
#~ msgstr "Nie można wysłać danych do drukarki. Czy inna praca jest nadal aktywna?"

#~ msgctxt "@label:MonitorStatus"
#~ msgid "Print aborted. Please check the printer"
#~ msgstr "Wydruk został przerwany. Sprawdź drukarkę"

#~ msgctxt "@label:MonitorStatus"
#~ msgid "Pausing print..."
#~ msgstr "Wstrzymywanie drukowania..."

#~ msgctxt "@label:MonitorStatus"
#~ msgid "Resuming print..."
#~ msgstr "Wznawianie drukowania ..."

#~ msgid "This printer is not set up to host a group of connected Ultimaker 3 printers."
#~ msgstr "Ta drukarka nie jest skonfigurowana do zarządzania grupą podłączonych drukarek Ultimaker 3."

#~ msgctxt "Count is number of printers."
#~ msgid "This printer is the host for a group of {count} connected Ultimaker 3 printers."
#~ msgstr "Ta drukarka jest gospodarzem grupy {count} podłączonych drukarek Ultimaker 3."

#~ msgid "{printer_name} has finished printing '{job_name}'. Please collect the print and confirm clearing the build plate."
#~ msgstr "{printer_name} skończyła drukowanie '{job_name}'. Proszę zabrać wydruk i potwierdzić oczyszczenie platformy roboczej."

#~ msgid "{printer_name} is reserved to print '{job_name}'. Please change the printer's configuration to match the job, for it to start printing."
#~ msgstr "{printer_name} jest zarezerwowana do druku '{job_name}'. Proszę zmień konfigurację drukarki, żeby pasowała do zadania dla niej, aby rozpocząć drukowanie."

#~ msgctxt "@info:status"
#~ msgid "Unable to send new print job: this 3D printer is not (yet) set up to host a group of connected Ultimaker 3 printers."
#~ msgstr "Nie można wysłać nowego zadania: ta drukarka 3D nie jest (jeszcze) ustawiona jako gospodarz grupy podłączonych drukarek Ultimaker 3."

#~ msgctxt "@info:status"
#~ msgid "Unable to send print job to group {cluster_name}."
#~ msgstr "Nie można wysłać zadania do grupy {cluster_name}."

#~ msgctxt "@info:status"
#~ msgid "Sent {file_name} to group {cluster_name}."
#~ msgstr "Wysłano {file_name} do grupy {cluster_name}."

#~ msgctxt "@action:button"
#~ msgid "Show print jobs"
#~ msgstr "Pokaż zadania druku"

#~ msgctxt "@info:tooltip"
#~ msgid "Opens the print jobs interface in your browser."
#~ msgstr "Otwiera interfejs zadań druku w przeglądarce."

#~ msgctxt "@label Printer name"
#~ msgid "Unknown"
#~ msgstr "Nieznana"

#~ msgctxt "@info:progress"
#~ msgid "Sending <filename>{file_name}</filename> to group {cluster_name}"
#~ msgstr "Wysyłanie <filename>{file_name}</filename> do grupy {cluster_name}"

#~ msgctxt "@info:status"
#~ msgid "SolidWorks reported errors, while opening your file. We recommend to solve these issues inside SolidWorks itself."
#~ msgstr "SolidWorks zgłosił błędy podczas otwierania twojego pliku. Zalecamy rozwiązanie tego problemu w samym SolidWorksie."

#~ msgctxt "@info:status"
#~ msgid ""
#~ "Found no models inside your drawing. Could you please check it's content again and make sure one part or assembly is inside?\n"
#~ "\n"
#~ " Thanks!."
#~ msgstr ""
#~ "Nie znaleziono  modeli wewnątrz twojego rysunku. Czy mógłbyś sprawdzić jego zawartość ponownie i upewnić się, że znajduje się tam jedna część lub złożenie?\n"
#~ "\n"
#~ "Dziękuję!."

#~ msgctxt "@info:status"
#~ msgid ""
#~ "Found more then one part or assembly inside your drawing. We currently only support drawings with exactly one part or assembly inside.\n"
#~ "\n"
#~ "Sorry!"
#~ msgstr ""
#~ "Znaleziono więcej niż jedną część lub złożenie wewnątrz rysunku. Obecnie obsługujemy tylko rysunki z dokładnie jedną częścią lub złożeniem.\n"
#~ "\n"
#~ "Przepraszamy!"

#~ msgctxt "@item:material"
#~ msgid "No material loaded"
#~ msgstr "Nie załadowano materiału"

#~ msgctxt "@item:material"
#~ msgid "Unknown material"
#~ msgstr "Nieznany materiał"

#~ msgctxt "@info:status Has a cancel button next to it."
#~ msgid "The selected material diameter causes the material to become incompatible with the current printer."
#~ msgstr "Wybrana średnica materiału powoduje, że materiał jest niekompatybilny z obecną drukarką."

#~ msgctxt "@action:button"
#~ msgid "Undo"
#~ msgstr "Cofnij"

#~ msgctxt "@action"
#~ msgid "Undo changing the material diameter."
#~ msgstr "Cofnij zmianę średnicy materiału."

#~ msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
#~ msgid "The machine defined in profile <filename>{0}</filename> doesn't match with your current machine, could not import it."
#~ msgstr "Maszyna zdefiniowana w profilu <filename>{0}</filename> nie zgadza się z obecnie wybraną maszyną, nie można zaimportować."

#~ msgctxt "@label crash message"
#~ msgid ""
#~ "<p><b>A fatal error has occurred. Please send us this Crash Report to fix the problem</p></b>\n"
#~ "            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
#~ "        "
#~ msgstr ""
#~ "<p><b>Wystąpił błąd krytyczny. Proszę wysłać do nas ten Raport Błędu, aby rozwiązać ten problem</p></b>\n"
#~ "            <p>Proszę użyć przycisku \"Wyślij raport\" aby wysłać raport automatycznie na nasze serwery</p>\n"
#~ "        "

#~ msgctxt "@label"
#~ msgid "not yet initialised<br/>"
#~ msgstr "jeszcze nie uruchomiono<br/>"

#~ msgctxt "@label"
#~ msgid "Gcode flavor"
#~ msgstr "Wersja Gcode"

#~ msgctxt "@label"
#~ msgid "Start Gcode"
#~ msgstr "Początk. Gcode"

#~ msgctxt "@tooltip"
#~ msgid "Gcode commands to be executed at the very start."
#~ msgstr "Komendy Gcode wykonywane na samym początku."

#~ msgctxt "@label"
#~ msgid "End Gcode"
#~ msgstr "Końcowy Gcode"

#~ msgctxt "@tooltip"
#~ msgid "Gcode commands to be executed at the very end."
#~ msgstr "Komendy Gcode wykonywane na samym początku."

#~ msgctxt "@label"
#~ msgid "Extruder Start Gcode"
#~ msgstr "Początkowy Gcode ekstrudera"

#~ msgctxt "@label"
#~ msgid "Extruder End Gcode"
#~ msgstr "Końcowy Gcode ekstrudera"

#~ msgctxt "@label"
#~ msgid "Starting firmware update, this may take a while."
#~ msgstr "Uruchamianie aktualizacji oprogramowania, to może potrwać chwilę."

#~ msgctxt "@label"
#~ msgid "Unknown error code: %1"
#~ msgstr "Nieznany kod błędu: %1"

#~ msgctxt "@label Printer name"
#~ msgid "Ultimaker 3"
#~ msgstr "Ultimaker 3"

#~ msgctxt "@label Printer name"
#~ msgid "Ultimaker 3 Extended"
#~ msgstr "Ultimaker 3 Extended"

#~ msgctxt "@label Printer status"
#~ msgid "Unknown"
#~ msgstr "Nieznany"

#~ msgctxt "@title:window"
#~ msgid "Find & Update plugins"
#~ msgstr "Znajdź i Zaktualizuj Wtyczki"

#~ msgctxt "@label"
#~ msgid "Here you can find a list of Third Party plugins."
#~ msgstr "Tutaj możesz znaleźć listę wtyczek innych firm."

#~ msgctxt "@action:button"
#~ msgid "Upgrade"
#~ msgstr "Ulepsz"

#~ msgctxt "@action:button"
#~ msgid "Download"
#~ msgstr "Pobierz"

#~ msgctxt "@info:tooltip"
#~ msgid "Show caution message in gcode reader."
#~ msgstr "Pokaż komunikat ostrzegawczy w tekście G-code."

#~ msgctxt "@option:check"
#~ msgid "Caution message in gcode reader"
#~ msgstr "Komunikat ostrzegawczy w tekście G-code"

#~ msgctxt "@window:title"
#~ msgid "Import Profile"
#~ msgstr "Importuj Profil"

#~ msgctxt "@action:label %1 is printer name, %2 is how this printer names variants, %3 is variant name"
#~ msgid "Printer: %1, %2: %3"
#~ msgstr "Drukarka: %1, %2: %3"

#~ msgctxt "@action:label %1 is printer name"
#~ msgid "Printer: %1"
#~ msgstr "Drukarka: %1"

#~ msgctxt "@label"
#~ msgid "GCode generator"
#~ msgstr "Generator GCode"

#~ msgctxt "@action:menu"
#~ msgid "Configure setting visiblity..."
#~ msgstr "Skonfiguruj widoczność ustawień..."

#~ msgctxt "@title:menuitem %1 is the automatically selected material"
#~ msgid "Automatic: %1"
#~ msgstr "Automatyczny: %1"

#~ msgctxt "@title:menuitem %1 is the nozzle currently loaded in the printer"
#~ msgid "Automatic: %1"
#~ msgstr "Automatyczny: %1"

#~ msgctxt "@info:status"
#~ msgid "No printer connected"
#~ msgstr "Nie podłączono drukarki"

#~ msgctxt "@tooltip"
#~ msgid "The current temperature of this extruder."
#~ msgstr "Bieżąca temperatura głowicy drukującej."

#~ msgctxt "@action:menu"
#~ msgid "Installed plugins..."
#~ msgstr "Zainstalowane wtyczki..."

#~ msgctxt "@label"
#~ msgid "Support Extruder"
#~ msgstr "Ekstruder od podpór"

#~ msgctxt "description"
#~ msgid "Writes GCode to a file."
#~ msgstr "Zapisuje Gcode do pliku."

#~ msgctxt "name"
#~ msgid "GCode Writer"
#~ msgstr "GCode Writer"

#~ msgctxt "name"
#~ msgid "GCode Profile Reader"
#~ msgstr "Czytnik Profili GCode"

#~ msgctxt "@info:status"
#~ msgid "Errors appeared while opening your SolidWorks file!             Please check, whether it is possible to open your file in SolidWorks itself without any problems as well!"
#~ msgstr "Wystąpił błąd podczas otwierania pliku SolidWorks!             Proszę sprawdź, czy możesz otworzyć plik SolidWorks bez żadnych problemów!"

#~ msgctxt "@info:status"
#~ msgid "Error while starting %s!"
#~ msgstr "Błąd podczas rozpoczynania %s!"

#~ msgctxt "@item:inlistbox"
#~ msgid "Simulation view"
#~ msgstr "Widok symulacji"

#~ msgctxt "@info"
#~ msgid "Cura collects anonymised slicing statistics. You can disable this in the preferences."
#~ msgstr "Cura zbiera anonimowe statystyki cięcia. Możesz wyłączyć to w ustawieniach."

#~ msgctxt "@action:button"
#~ msgid "Dismiss"
#~ msgstr "Anuluj"

#~ msgctxt "@menuitem"
#~ msgid "Global"
#~ msgstr "Globalny"

#~ msgctxt "@label crash message"
#~ msgid ""
#~ "<p><b>A fatal exception has occurred. Please send us this Crash Report to fix the problem</p></b>\n"
#~ "            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
#~ "        "
#~ msgstr ""
#~ "<p><b>Wystąpił fatalny błąd. Proszę wyślij do nas ten Raport Błędu, abyśmy mogli naprawić błąd</p></b>\n"
#~ "            <p>Proszę użyj przycisku \"Wyślij raport\", aby wysłać raport błędu automatycznie na nasze serwery.</p>\n"
#~ "        "

#~ msgctxt "@label Cura version"
#~ msgid "<b>Cura version:</b> {version}<br/>"
#~ msgstr "<b>Wersja Cura:</b> {version}<br/>"

#~ msgctxt "@label Platform"
#~ msgid "<b>Platform:</b> {platform}<br/>"
#~ msgstr "<b>Platforma:</b> {platform}<br/>"

#~ msgctxt "@label Qt version"
#~ msgid "<b>Qt version:</b> {qt}<br/>"
#~ msgstr "<b>Wersja Qt:</b> {qt}<br/>"

#~ msgctxt "@label PyQt version"
#~ msgid "<b>PyQt version:</b> {pyqt}<br/>"
#~ msgstr "<b>Wersja PyQt:</b> {pyqt}<br/>"

#~ msgctxt "@label OpenGL"
#~ msgid "<b>OpenGL:</b> {opengl}<br/>"
#~ msgstr "<b>OpenGL:</b> {opengl}<br/>"

#~ msgctxt "@title:groupbox"
#~ msgid "Exception traceback"
#~ msgstr "Śledzenie błędów"

#~ msgctxt "@label"
#~ msgid "Material diameter"
#~ msgstr "Średnica materiału"

#~ msgctxt "@title:window"
#~ msgid "Cura SolidWorks Plugin Configuration"
#~ msgstr "Konfiguracja Wtyczki Cura SolidWorks"

#~ msgctxt "@action:label"
#~ msgid "Default quality of the exported STL:"
#~ msgstr "Domyślna jakość eksportowanego STL:"

#~ msgctxt "@option:curaSolidworksStlQuality"
#~ msgid "Always ask"
#~ msgstr "Zawsze pytaj"

#~ msgctxt "@option:curaSolidworksStlQuality"
#~ msgid "Always use Fine quality"
#~ msgstr "Zawsze używaj Dobrej jakości"

#~ msgctxt "@option:curaSolidworksStlQuality"
#~ msgid "Always use Coarse quality"
#~ msgstr "Zawsze używaj Słabej jakości"

#~ msgctxt "@title:window"
#~ msgid "Import SolidWorks File as STL..."
#~ msgstr "Importuj Plik SolidWorks jako STL..."

#~ msgctxt "@info:tooltip"
#~ msgid "Quality of the Exported STL"
#~ msgstr "Jakość Eksportowanego STL"

#~ msgctxt "@action:label"
#~ msgid "Quality"
#~ msgstr "Jakość"

#~ msgctxt "@option:curaSolidworksStlQuality"
#~ msgid "Coarse"
#~ msgstr "Słaba"

#~ msgctxt "@option:curaSolidworksStlQuality"
#~ msgid "Fine"
#~ msgstr "Dobra"

#~ msgctxt "@"
#~ msgid "No Profile Available"
#~ msgstr "Brak Dostępnego Profilu"

#~ msgctxt "@label"
#~ msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders"
#~ msgstr "To ustawienie jest zawsze dzielone między wszystkie ekstrudery. Zmiana jego wartości tutaj spowoduje zmianę dla wszystkich ekstruderów"

#~ msgctxt "@tooltip"
#~ msgid "<b>Time specification</b><br/><table>"
#~ msgstr "<b>Szacowany czas</b><br/><table>"

#~ msgctxt "@action:inmenu menubar:view"
#~ msgid "&Reset camera position"
#~ msgstr "&Zresetuj pozycję kamery"

#~ msgctxt "@title:menu menubar:file"
#~ msgid "Save project"
#~ msgstr "Zapisz projekt"

#~ msgctxt "@title:tab"
#~ msgid "Prepare"
#~ msgstr "Przygotuj"

#~ msgctxt "@title:tab"
#~ msgid "Monitor"
#~ msgstr "Monitor"

#~ msgctxt "@label"
#~ msgid "<a href='%1'>Check compatibility</a>"
#~ msgstr "<a href='%1'>Sprawdź kompatybilność</a>"

#~ msgctxt "description"
#~ msgid "Gives you the possibility to open certain files via SolidWorks itself. These are then converted and loaded into Cura"
#~ msgstr "Daje tobie możliwość otwierania plików poprzez SolidWorks. Pliki są potem konwertowane i ładowane do Cura"

#~ msgctxt "@label:status"
#~ msgid "Blocked"
#~ msgstr "Zablokowany"

#~ msgctxt "@label:status"
#~ msgid "Can't start print"
#~ msgstr "Nie mogę rozpocząć drukowania"

#~ msgctxt "@action:button"
#~ msgid "Open Connect.."
#~ msgstr "Otwórz Connect.."

#~ msgctxt "@info:title"
#~ msgid "Print Details"
#~ msgstr "Szczegółu druku"

#~ msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
#~ msgid "To ensure that your {machine_name} is equipped with the latest features it is recommended to update the firmware regularly. This can be done on the {machine_name} (when connected to the network) or via USB."
#~ msgstr "Aby upewnić się że twoja {machine_name} jest wyposażona w najnowsze opcje rekomendowane jest aktualizowanie oprogramowania regularnie. Może to być wykonane na {machine_name} (kiedy jest podłączona do sieci) lub przez USB."

#~ msgctxt "@info:title"
#~ msgid "Layer View"
#~ msgstr "Widok warstwy"

#~ msgctxt "@menuitem"
#~ msgid "Browse plugins"
#~ msgstr "Przeglądaj wtyczki"

#~ msgctxt "@info:title"
#~ msgid "Export Details"
#~ msgstr "Szczegóły Eskportu"

#~ msgctxt "@label"
#~ msgid ""
#~ "<p>A fatal exception has occurred that we could not recover from!</p>\n"
#~ "        <p>Please use the information below to post a bug report at <a href=\"http://github.com/Ultimaker/Cura/issues\">http://github.com/Ultimaker/Cura/issues</a></p>\n"
#~ "    "
#~ msgstr ""
#~ "<p>Pojawił się fatalny wyjątek, z którego nie możemy odzyskać!</p>\n"
#~ "        <p>Aby przesłać zgłoszenie błędu, skorzystaj z poniższych informacji <a href=\"http://github.com/Ultimaker/Cura/issues\">http://github.com/Ultimaker/Cura/issues</a></p>\n"
#~ "    "

#~ msgctxt "@action:button"
#~ msgid "Open Web Page"
#~ msgstr "Otwórz stronę sieci Web"

#~ msgctxt "@action:button"
#~ msgid "Ok"
#~ msgstr "Ok"

#~ msgctxt "@label"
#~ msgid "This printer is not set up to host a group of connected Ultimaker 3 printers"
#~ msgstr "Ta drukarka nie została ustawiona do hostowania grupy podłączonych drukarek Ultimaker 3"

#~ msgctxt "@label"
#~ msgid "This printer is the host for a group of %1 connected Ultimaker 3 printers"
#~ msgstr "Ta drukarka nie została ustawiona do hostowania grupy %1 podłączonych drukarek Ultimaker 3"

#~ msgctxt "@label"
#~ msgid "Completed on: "
#~ msgstr "Zakończono:"

#~ msgctxt "@info:tooltip"
#~ msgid "Opens the print jobs page with your default web  browser."
#~ msgstr "Otwiera stronę zadań drukowania za pomocą domyślnej przeglądarki."

#~ msgctxt "@label"
#~ msgid "PRINTER GROUP"
#~ msgstr "GRUPA DRUKAREK"

#~ msgctxt "@action:warning"
#~ msgid "Loading a project will clear all models on the buildplate"
#~ msgstr "Załadowanie projektu spowoduje usunięcie wszystkich modeli ze stołu"

#~ msgctxt "@label"
#~ msgid ""
#~ " plugin contains a license.\n"
#~ "You need to accept this license to install this plugin.\n"
#~ "Do you agree with the terms below?"
#~ msgstr ""
#~ " wtyczka zawiera licencje.\n"
#~ "Musisz zaakceptować tą licencję, aby zainstalować wtyczkę.\n"
#~ "Akceptujesz poniższe postanowienia?"

#~ msgctxt "@label"
#~ msgid "00h 00min"
#~ msgstr "00h 00min"

#~ msgctxt "@tooltip"
#~ msgid "<b>Time information</b>"
#~ msgstr "<b>Informacje o czasie</b>"

#~ msgctxt "@description"
#~ msgid "Print time"
#~ msgstr "Czas druku"

#~ msgctxt "@label"
#~ msgid "%1m / ~ %2g / ~ %4 %3"
#~ msgstr "%1m / ~ %2g / ~ %4 %3"

#~ msgctxt "@label"
#~ msgid "%1m / ~ %2g"
#~ msgstr "%1m / ~ %2g"

#~ msgctxt "@title:window"
#~ msgid "Cura"
#~ msgstr "Cura"

#~ msgctxt "@label"
#~ msgid "<a href='%1'>Check material compatibility</a>"
#~ msgstr "<a href='%1'>Sprawdź kompatybilność materiału</a>"

#~ msgctxt "name"
#~ msgid "UM3 Network Connection (Cluster)"
#~ msgstr "Połączenie Sieciowe UM3 (Grupa)"

#~ msgctxt "description"
#~ msgid "Provides the Layer view."
#~ msgstr "Zapewnia widok warstw."

#~ msgctxt "name"
#~ msgid "Layer View"
#~ msgstr "Widok Warstw"

#~ msgctxt "@item:inlistbox"
#~ msgid "X-Ray"
#~ msgstr "Prześwietlenie"

#~ msgctxt "@label"
#~ msgid "Doodle3D"
#~ msgstr "Doodle3D"

#~ msgctxt "@info:whatsthis"
#~ msgid "Accepts G-Code and sends them over WiFi to a Doodle3D WiFi-Box."
#~ msgstr "Akceptuje G-code i wysyła je przez WiFi do Doodle3D WiFi-Box."

#~ msgctxt "@item:inmenu"
#~ msgid "Doodle3D printing"
#~ msgstr "Drukowanie Doodle3D"

#~ msgctxt "@action:button"
#~ msgid "Print with Doodle3D"
#~ msgstr "Drukuj z Doodle3D"

#~ msgctxt "@info:tooltip"
#~ msgid "Print with "
#~ msgstr "Drukuj z "

#~ msgctxt "@title:menu"
#~ msgid "Doodle3D"
#~ msgstr "Doodle3D"

#~ msgctxt "@item:inlistbox"
#~ msgid "Enable Scan devices..."
#~ msgstr "Włącz skanowanie urządzeń ..."

#~ msgctxt "@info:progress"
#~ msgid "Saving to Removable Drive <filename>{0}</filename>"
#~ msgstr "Zapisywanie na dysk wymienny <filename>{0}</filename>"

#~ msgctxt "@info:status"
#~ msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
#~ msgstr "Nie udało się zapisać do <filename>{0}</filename>: <message>{1}</message>"

#~ msgctxt "@info:status"
#~ msgid "Please keep in mind, that you have to reopen your SolidWorks file manually! Reloading the model won't work!"
#~ msgstr "Pamiętaj, że musisz ponownie otworzyć plik SolidWorks ręcznie! Przeładowanie modelu nie będzie działać!"

#~ msgctxt "@item:inlistbox"
#~ msgid "Layers"
#~ msgstr "Warstwy"

#~ msgid "Browse plugins"
#~ msgstr "Przeglądaj wtyczki"

#~ msgctxt "@item:inmenu"
#~ msgid "Solid"
#~ msgstr "Bryła"

#~ msgctxt "@label"
#~ msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
#~ msgstr "Plik <filename>{0}</filename> już istnieje. Czy na pewno chcesz go nadpisać?"

#~ msgctxt "@info:status"
#~ msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
#~ msgstr "Nie można wyeksportować profilu do <filename>{0}</filename>: <message>{1}</message>"

#~ msgctxt "@info:status"
#~ msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
#~ msgstr "Nie można wyeksportować profilu do <filename>{0}</filename>: Wtyczka Cura zgłosiła błąd."

#~ msgctxt "@info:status"
#~ msgid "Exported profile to <filename>{0}</filename>"
#~ msgstr "Wyeksportowano profil do <filename>{0}</filename>"

#~ msgctxt "@info:status"
#~ msgid "Failed to import profile from <filename>{0}</filename>: <message>{1}</message>"
#~ msgstr "Nie można zaimportować profilu z <filename>{0}</filename>: <message>{1}</message>"

#~ msgctxt "@title:window"
#~ msgid "Doodle3D Settings"
#~ msgstr "Ustawienia Doodle3D"

#~ msgctxt "@title:window"
#~ msgid "Print to: %1"
#~ msgstr "Drukuj do: %1"

#~ msgctxt "@label"
#~ msgid "Extruder Temperature: %1/%2°C"
#~ msgstr "Temperatura dyszy: %1/%2°C"

#~ msgctxt "@label"
#~ msgid "Bed Temperature: %1/%2°C"
#~ msgstr "Temperatura stołu: %1/%2°C"

#~ msgctxt "@label"
#~ msgid "%1"
#~ msgstr "%1"

#~ msgctxt "@label"
#~ msgid "View Mode: Layers"
#~ msgstr "Tryb widoku: warstwy"

#~ msgctxt "@info:status"
#~ msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
#~ msgstr "Nie można zaimportować materiału <filename>%1</filename>: <message>%2</message>"

#~ msgctxt "@info:status"
#~ msgid "Successfully imported material <filename>%1</filename>"
#~ msgstr "Pomyślnie zaimportowano materiał <filename>%1</filename>"

#~ msgctxt "@info:status"
#~ msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
#~ msgstr "Nie udało się wyeksportować materiału do <filename>%1</filename>: <message>%2</message>"

#~ msgctxt "@info:status"
#~ msgid "Successfully exported material to <filename>%1</filename>"
#~ msgstr "Udało się wyeksportować materiał do <filename>%1</filename>"

#~ msgctxt "@label"
#~ msgid "%1 m / ~ %2 g / ~ %4 %3"
#~ msgstr "%1 m / ~ %2 g / ~ %4 %3"

#~ msgctxt "@label"
#~ msgid "%1 m / ~ %2 g"
#~ msgstr "%1 m / ~ %2 g"

#~ msgctxt "@label"
#~ msgid "Hotend"
#~ msgstr "Głowica"

#~ msgctxt "@action:button"
#~ msgid "View Mode"
#~ msgstr "Tryb podglądu"

#~ msgctxt "@title:tab"
#~ msgid "Print"
#~ msgstr "Drukuj"

#~ msgctxt "@label"
#~ msgid "0%"
#~ msgstr "0%"

#~ msgctxt "@label"
#~ msgid "Empty infill will leave your model hollow with low strength."
#~ msgstr "Puste wypełnienie pozostawi twój model pusty z niską wytrzymałością."

#~ msgctxt "@label"
#~ msgid "20%"
#~ msgstr "20%"

#~ msgctxt "@label"
#~ msgid "Light (20%) infill will give your model an average strength."
#~ msgstr "Lekkie (20%) wypełnienie sprawi, że model będzie średniej wytrzymałości."

#~ msgctxt "@label"
#~ msgid "50%"
#~ msgstr "50%"

#~ msgctxt "@label"
#~ msgid "Dense (50%) infill will give your model an above average strength."
#~ msgstr "Gęste wypełnienie (50%) da modelowi wyższą niż średnia wytrzymałość."

#~ msgctxt "@label"
#~ msgid "100%"
#~ msgstr "100%"

#~ msgctxt "@label"
#~ msgid "Solid (100%) infill will make your model completely solid."
#~ msgstr "Pełne (100%) wypełnienie sprawi, że model będzie całkowicie wypełniony."

#~ msgctxt "@label"
#~ msgid "Gradual"
#~ msgstr "Stopniowy"

#~ msgctxt "description"
#~ msgid "Provides support for writing X3G files"
#~ msgstr "Zapewnia wsparcie w tworzeniu plików X3G"

#~ msgctxt "name"
#~ msgid "X3G Writer"
#~ msgstr "X3G Writer"

#~ msgctxt "@label"
#~ msgid "Machine Settings action"
#~ msgstr "Czynność ustawienia drukarki"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc)"
#~ msgstr "Zapewnia sposób zmiany ustawień maszyn (takich jak objętość robocza, rozmiar dyszy itd.)"

#~ msgctxt "@label"
#~ msgid "X-Ray View"
#~ msgstr "Widok rentgenowski"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides the X-Ray view."
#~ msgstr "Zapewnia widok rentgenowski."

#~ msgctxt "@label"
#~ msgid "X3D Reader"
#~ msgstr "Czytnik X3D"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides support for reading X3D files."
#~ msgstr "Zapewnia obsługę czytania plików X3D."

#~ msgctxt "@label"
#~ msgid "GCode Writer"
#~ msgstr "GCode Autor"

#~ msgctxt "@info:whatsthis"
#~ msgid "Writes GCode to a file."
#~ msgstr "Zapisuje kod GCode do pliku."

#~ msgctxt "@action:button Preceded by 'Ready to'."
#~ msgid "Print with Doodle3D"
#~ msgstr "Drukuj z Doodle3D"

#~ msgctxt "@info:whatsthis"
#~ msgid "Shows changes since latest checked version."
#~ msgstr "Pokazuje zmiany od ostatniej sprawdzonej wersji."

#~ msgctxt "@label"
#~ msgid "Profile flatener"
#~ msgstr "Charakterystyka Profila"

#~ msgctxt "@info:whatsthis"
#~ msgid "Create a flattend quality changes profile."
#~ msgstr "Utwórz charakterystyczny profil jakości"

#~ msgctxt "@label"
#~ msgid "USB printing"
#~ msgstr "Drukowanie USB"

#~ msgctxt "@info:whatsthis"
#~ msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
#~ msgstr "Akceptuje G-code i wysyła je do drukarki. Wtyczka może również aktualizować oprogramowanie układowe."

#~ msgctxt "X3G Writer Plugin Description"
#~ msgid "Writes X3G to a file"
#~ msgstr "Zapisuje do pliku X3G"

#~ msgctxt "@label"
#~ msgid "Removable Drive Output Device Plugin"
#~ msgstr "Usuwana wtyczka urządzenia wyjściowego napędu"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides removable drive hotplugging and writing support."
#~ msgstr "Zapewnia podłączanie wymiennego dysku i zapisywania na bieżąco."

#~ msgctxt "@info:whatsthis"
#~ msgid "Manages network connections to Ultimaker 3 printers"
#~ msgstr "Zarządza połączeniami sieciowymi z drukarkami Ultimaker 3"

#~ msgctxt "@label"
#~ msgid "Different print core (Cura: {0}, Printer: {1}) selected for extruder {2}"
#~ msgstr "Różne Print core (Cura: {0}, Drukarka: {1}) wybrane dla dyszy {2}"

#~ msgctxt "@label"
#~ msgid "Print core {0} is not properly calibrated. XY calibration needs to be performed on the printer."
#~ msgstr "Print core {0} nie jest poprawnie skalibrowany. Na drukarce powinna zostać przeprowadzona Kalibracja XY."

#~ msgctxt "@label"
#~ msgid "The print cores and/or materials on your printer differ from those within your current project. For the best result, always slice for the print cores and materials that are inserted in your printer."
#~ msgstr "Print core'y i/lub materiały w twojej drukarce różnią się od tych, które zostały wybrane w obecnym projekcie. Dla najlepszego rezultatu, zawsze tnij modele dla pint core'ów i materiałów, które są umieszczone w twojej drukarce."

#~ msgctxt "@label"
#~ msgid "Post Processing"
#~ msgstr "Przetwarzanie "

#~ msgctxt "Description of plugin"
#~ msgid "Extension that allows for user created scripts for post processing"
#~ msgstr "Rozszerzenie, które pozwala tworzyć skrypty dla użytkowników po przetworzeniu"

#~ msgctxt "@label"
#~ msgid "Auto Save"
#~ msgstr "Automatyczne zapisywanie"

#~ msgctxt "@info:whatsthis"
#~ msgid "Automatically saves Preferences, Machines and Profiles after changes."
#~ msgstr "Automatycznie zapisuje ustawienia, maszyny i profile po zmianach."

#~ msgctxt "@label"
#~ msgid "Slice info"
#~ msgstr "Cura informacja"

#~ msgctxt "@info:whatsthis"
#~ msgid "Submits anonymous slice info. Can be disabled through preferences."
#~ msgstr "Składa anonimową listę cięc. Można wyłączyć przez preferencje."

#~ msgctxt "@info"
#~ msgid "Cura collects anonymised slicing statistics. You can disable this in preferences"
#~ msgstr "Cura zbiera anonimowe statystyki. Możesz wyłączyć to w preferencjach"

#~ msgctxt "@label"
#~ msgid "Material Profiles"
#~ msgstr "Profile materiałów"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides capabilities to read and write XML-based material profiles."
#~ msgstr "Zapewnia możliwość odczytu i zapisu profili materiałów opartych na XML."

#~ msgctxt "@label"
#~ msgid "Legacy Cura Profile Reader"
#~ msgstr "Starszy czytnik Cura"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides support for importing profiles from legacy Cura versions."
#~ msgstr "Zapewnia obsługę importowania profili w starszych wersjach Cura."

#~ msgctxt "@label"
#~ msgid "GCode Profile Reader"
#~ msgstr "Czytnik profilu GCode"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides support for importing profiles from g-code files."
#~ msgstr "Zapewnia obsługę importowania profili z plików g-code."

#~ msgctxt "@label"
#~ msgid "Layer View"
#~ msgstr "Widok warstwy"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides the Layer view."
#~ msgstr "Zapewnia widok warstwy."

#~ msgctxt "@label"
#~ msgid "Version Upgrade 2.5 to 2.6"
#~ msgstr "Aktualizacja wersji 2.5 do 2.6"

#~ msgctxt "@info:whatsthis"
#~ msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
#~ msgstr "Uaktualnia konfiguracji z Cura 2.5 do Cura 2.6."

#~ msgctxt "@label"
#~ msgid "Version Upgrade 2.1 to 2.2"
#~ msgstr "Aktualizacja wersji 2.1 do 2.2"

#~ msgctxt "@info:whatsthis"
#~ msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
#~ msgstr "Uaktualnia konfiguracji z Cura 2.1 do Cura 2.2."

#~ msgctxt "@label"
#~ msgid "Version Upgrade 2.2 to 2.4"
#~ msgstr "Aktualizacja wersji 2.2 do 2.4"

#~ msgctxt "@info:whatsthis"
#~ msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
#~ msgstr "Uaktualnia konfiguracji z Cura 2.2 do Cura 2.4."

#~ msgctxt "@label"
#~ msgid "Image Reader"
#~ msgstr "Czytnik Obrazów"

#~ msgctxt "@info:whatsthis"
#~ msgid "Enables ability to generate printable geometry from 2D image files."
#~ msgstr "Umożliwia generowanie drukowanej geometrii z plików obrazów 2D."

#~ msgctxt "@label"
#~ msgid "CuraEngine Backend"
#~ msgstr "CuraEngine Backend"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides the link to the CuraEngine slicing backend."
#~ msgstr "Zapewnia połączenie do narzędzi cięcia CuraEngine."

#~ msgctxt "@label"
#~ msgid "Per Model Settings Tool"
#~ msgstr "Narzędzie ustawień osobno dla każdego modelu"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides the Per Model Settings."
#~ msgstr "Zapewnia ustawienia każdego modelu osobno."

#~ msgctxt "@label"
#~ msgid "3MF Reader"
#~ msgstr "Czytnik 3MF"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides support for reading 3MF files."
#~ msgstr "Zapewnia obsługę czytania plików 3MF."

#~ msgctxt "@label"
#~ msgid "Solid View"
#~ msgstr "Widok bryły"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides a normal solid mesh view."
#~ msgstr "Zapewnia normalny widok siatki."

#~ msgctxt "@label"
#~ msgid "G-code Reader"
#~ msgstr "Czytnik G-code"

#~ msgctxt "@info:whatsthis"
#~ msgid "Allows loading and displaying G-code files."
#~ msgstr "Umożliwia ładowanie i wyświetlanie plików G-code."

#~ msgctxt "@label"
#~ msgid "Cura Profile Writer"
#~ msgstr "Pisarz Profili Cura"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides support for exporting Cura profiles."
#~ msgstr "Zapewnia obsługę eksportowania profili Cura."

#~ msgctxt "@label"
#~ msgid "3MF Writer"
#~ msgstr "3MF Writer"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides support for writing 3MF files."
#~ msgstr "Zapewnia obsługę pisania plików 3MF."

#~ msgctxt "@label"
#~ msgid "Ultimaker machine actions"
#~ msgstr "Działania maszyny Ultimaker"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc)"
#~ msgstr "Zapewnia działania maszyny Ultimaker (takie jak kreator poziomowania stołu, wybierania ulepszeń itd.)"

#~ msgctxt "@label"
#~ msgid "Cura Profile Reader"
#~ msgstr "Czytnik profilu Cura"

#~ msgctxt "@info:whatsthis"
#~ msgid "Provides support for importing Cura profiles."
#~ msgstr "Zapewnia wsparcie dla importowania profili Cura."

#~ msgctxt "@info"
#~ msgid "%(width).1f x %(depth).1f x %(height).1f mm"
#~ msgstr "%(width).1f x %(depth).1f x %(height).1f mm"

#~ msgctxt "@label"
#~ msgid "Build Plate Shape"
#~ msgstr "Kształt stołu"

#~ msgctxt "@option:check"
#~ msgid "Machine Center is Zero"
#~ msgstr "Środek drukarki to zero"

#~ msgctxt "@option:check"
#~ msgid "Heated Bed"
#~ msgstr "Stół podgrzewany"

#~ msgctxt "@label"
#~ msgid "GCode Flavor"
#~ msgstr "GCode Flavor"

#~ msgctxt "@label"
#~ msgid "Material Diameter"
#~ msgstr "Średnica filamentu"

#~ msgctxt "@label"
#~ msgid "If your printer is not listed, read the <a href='%1'>network-printing troubleshooting guide</a>"
#~ msgstr "Jeśli drukarka nie ma na liście, przeczytaj <a href='%1'>przewodnik o rozwiązywaniu problemów z drukowaniem sieciowym</a>"

#~ msgctxt "@item:inlistbox"
#~ msgid "Ultimaker"
#~ msgstr "Ultimaker"

#~ msgctxt "@label"
#~ msgid "Support library for scientific computing "
#~ msgstr "Wsparcie biblioteki dla obliczeń naukowych "

#~ msgctxt "@tooltip"
#~ msgid "<b>Print Setup</b><br/><br/>Edit or review the settings for the active print job."
#~ msgstr "<b>Ustawienia drukowania</b><br/><br/>Edytuj lub przejrzyj ustawienia dla aktywnego zadania."

#~ msgctxt "@tooltip"
#~ msgid "<b>Print Monitor</b><br/><br/>Monitor the state of the connected printer and the print job in progress."
#~ msgstr "<b>Monitor wydruku</b><br/><br/>Monitorowanie stanu podłączonej drukarki i aktualnego zadania."

#~ msgctxt "@title:menuitem %1 is the value from the printer"
#~ msgid "Automatic: %1"
#~ msgstr "Automatyczny: %1"

#~ msgctxt "@label:PrintjobStatus"
#~ msgid "Please load a 3d model"
#~ msgstr "Proszę załaduj model 3d"

#~ msgctxt "@label"
#~ msgid "Print Selected Model with %1"
#~ msgid_plural "Print Selected Models With %1"
#~ msgstr[0] "Wydrukuj wybrany model z %1"
#~ msgstr[1] "Wydrukuj wybrane modele z %1"