#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: Uranium json setting files\n"
"Report-Msgid-Bugs-To: http://github.com/Ultimaker/Cura\n"
"POT-Creation-Date: 2016-09-20 17:35+0000\n"
"PO-Revision-Date: 2016-10-11 16:05+0200\n"
"Last-Translator: Ruben Dulek <r.dulek@ultimaker.com>\n"
"Language-Team: Ultimaker\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: fdmextruder.def.json
msgctxt "machine_settings label"
msgid "Machine"
msgstr "Machine"

#: fdmextruder.def.json
msgctxt "machine_settings description"
msgid "Machine specific settings"
msgstr "Instellingen van de machine"

#: fdmextruder.def.json
msgctxt "extruder_nr label"
msgid "Extruder"
msgstr "Extruder"

#: fdmextruder.def.json
msgctxt "extruder_nr description"
msgid "The extruder train used for printing. This is used in multi-extrusion."
msgstr "De extruder train die voor het printen wordt gebruikt. Deze wordt gebruikt in meervoudige doorvoer."

#: fdmextruder.def.json
msgctxt "machine_nozzle_offset_x label"
msgid "Nozzle X Offset"
msgstr "X-Offset Nozzle"

#: fdmextruder.def.json
msgctxt "machine_nozzle_offset_x description"
msgid "The x-coordinate of the offset of the nozzle."
msgstr "De X-coördinaat van de offset van de nozzle."

#: fdmextruder.def.json
msgctxt "machine_nozzle_offset_y label"
msgid "Nozzle Y Offset"
msgstr "Y-Offset Nozzle"

#: fdmextruder.def.json
msgctxt "machine_nozzle_offset_y description"
msgid "The y-coordinate of the offset of the nozzle."
msgstr "De Y-coördinaat van de offset van de nozzle."

#: fdmextruder.def.json
msgctxt "machine_extruder_start_code label"
msgid "Extruder Start G-Code"
msgstr "Start G-code van Extruder"

#: fdmextruder.def.json
msgctxt "machine_extruder_start_code description"
msgid "Start g-code to execute whenever turning the extruder on."
msgstr "Start-g-code die wordt uitgevoerd wanneer de extruder wordt ingeschakeld."

#: fdmextruder.def.json
msgctxt "machine_extruder_start_pos_abs label"
msgid "Extruder Start Position Absolute"
msgstr "Absolute Startpositie Extruder"

#: fdmextruder.def.json
msgctxt "machine_extruder_start_pos_abs description"
msgid ""
"Make the extruder starting position absolute rather than relative to the "
"last-known location of the head."
msgstr "Maak van de startpositie van de extruder de absolute startpositie, in plaats van de relatieve startpositie ten opzichte van de laatst bekende locatie van de printkop."

#: fdmextruder.def.json
msgctxt "machine_extruder_start_pos_x label"
msgid "Extruder Start Position X"
msgstr "X-startpositie Extruder"

#: fdmextruder.def.json
msgctxt "machine_extruder_start_pos_x description"
msgid "The x-coordinate of the starting position when turning the extruder on."
msgstr "De X-coördinaat van de startpositie wanneer de extruder wordt ingeschakeld."

#: fdmextruder.def.json
msgctxt "machine_extruder_start_pos_y label"
msgid "Extruder Start Position Y"
msgstr "Y-startpositie Extruder"

#: fdmextruder.def.json
msgctxt "machine_extruder_start_pos_y description"
msgid "The y-coordinate of the starting position when turning the extruder on."
msgstr "De Y-coördinaat van de startpositie wanneer de extruder wordt ingeschakeld."

#: fdmextruder.def.json
msgctxt "machine_extruder_end_code label"
msgid "Extruder End G-Code"
msgstr "Eind-g-code van Extruder"

#: fdmextruder.def.json
msgctxt "machine_extruder_end_code description"
msgid "End g-code to execute whenever turning the extruder off."
msgstr "Eind-g-code die wordt uitgevoerd wanneer de extruder wordt uitgeschakeld."

#: fdmextruder.def.json
msgctxt "machine_extruder_end_pos_abs label"
msgid "Extruder End Position Absolute"
msgstr "Absolute Eindpositie Extruder"

#: fdmextruder.def.json
msgctxt "machine_extruder_end_pos_abs description"
msgid ""
"Make the extruder ending position absolute rather than relative to the last-"
"known location of the head."
msgstr "Maak van de eindpositie van de extruder de absolute eindpositie, in plaats van de relatieve eindpositie ten opzichte van de laatst bekende locatie van de printkop."

#: fdmextruder.def.json
msgctxt "machine_extruder_end_pos_x label"
msgid "Extruder End Position X"
msgstr "X-eindpositie Extruder"

#: fdmextruder.def.json
msgctxt "machine_extruder_end_pos_x description"
msgid "The x-coordinate of the ending position when turning the extruder off."
msgstr "De X-coördinaat van de eindpositie wanneer de extruder wordt uitgeschakeld."

#: fdmextruder.def.json
msgctxt "machine_extruder_end_pos_y label"
msgid "Extruder End Position Y"
msgstr "Y-eindpositie Extruder"

#: fdmextruder.def.json
msgctxt "machine_extruder_end_pos_y description"
msgid "The y-coordinate of the ending position when turning the extruder off."
msgstr "De Y-coördinaat van de eindpositie wanneer de extruder wordt uitgeschakeld."

#: fdmextruder.def.json
msgctxt "extruder_prime_pos_z label"
msgid "Extruder Prime Z Position"
msgstr "Z-positie voor Primen Extruder"

#: fdmextruder.def.json
msgctxt "extruder_prime_pos_z description"
msgid ""
"The Z coordinate of the position where the nozzle primes at the start of "
"printing."
msgstr "De Z-coördinaat van de positie waar filament in de nozzle wordt geprimet aan het begin van het printen."

#: fdmextruder.def.json
msgctxt "platform_adhesion label"
msgid "Build Plate Adhesion"
msgstr "Hechting aan Platform"

#: fdmextruder.def.json
msgctxt "platform_adhesion description"
msgid "Adhesion"
msgstr "Hechting"

#: fdmextruder.def.json
msgctxt "extruder_prime_pos_x label"
msgid "Extruder Prime X Position"
msgstr "X-positie voor Primen Extruder"

#: fdmextruder.def.json
msgctxt "extruder_prime_pos_x description"
msgid ""
"The X coordinate of the position where the nozzle primes at the start of "
"printing."
msgstr "De X-coördinaat van de positie waar filament in de nozzle wordt geprimet aan het begin van het printen."

#: fdmextruder.def.json
msgctxt "extruder_prime_pos_y label"
msgid "Extruder Prime Y Position"
msgstr "Y-positie voor Primen Extruder"

#: fdmextruder.def.json
msgctxt "extruder_prime_pos_y description"
msgid ""
"The Y coordinate of the position where the nozzle primes at the start of "
"printing."
msgstr "De Y-coördinaat van de positie waar filament in de nozzle wordt geprimet aan het begin van het printen."