# Copyright (c) 2021 Ultimaker B.V. # Cura is released under the terms of the LGPLv3 or higher. import sys from PyQt6.QtCore import Qt from PyQt6.QtGui import QOpenGLContext from PyQt6.QtWidgets import QApplication from UM.Application import Application from UM.Event import Event, KeyEvent from UM.Job import Job from UM.Logger import Logger from UM.Math.Color import Color from UM.Math.Matrix import Matrix from UM.Mesh.MeshBuilder import MeshBuilder from UM.Message import Message from UM.Platform import Platform from UM.PluginRegistry import PluginRegistry from UM.Qt.QtApplication import QtApplication from UM.Resources import Resources from UM.Scene.Iterator.DepthFirstIterator import DepthFirstIterator from UM.Scene.Selection import Selection from UM.Signal import Signal from UM.View.CompositePass import CompositePass from UM.View.GL.OpenGL import OpenGL from UM.View.GL.OpenGLContext import OpenGLContext from UM.View.GL.ShaderProgram import ShaderProgram from UM.i18n import i18nCatalog from cura.CuraView import CuraView from cura.LayerPolygon import LayerPolygon # To distinguish line types. from cura.Scene.ConvexHullNode import ConvexHullNode from cura.CuraApplication import CuraApplication from .NozzleNode import NozzleNode from .SimulationPass import SimulationPass from .SimulationViewProxy import SimulationViewProxy import numpy import os.path from typing import Optional, TYPE_CHECKING, List, cast if TYPE_CHECKING: from UM.Scene.SceneNode import SceneNode from UM.Scene.Scene import Scene from UM.Settings.ContainerStack import ContainerStack catalog = i18nCatalog("cura") class SimulationView(CuraView): """The preview layer view. It is used to display g-code paths.""" # Must match SimulationViewMenuComponent.qml LAYER_VIEW_TYPE_MATERIAL_TYPE = 0 LAYER_VIEW_TYPE_LINE_TYPE = 1 LAYER_VIEW_TYPE_FEEDRATE = 2 LAYER_VIEW_TYPE_THICKNESS = 3 _no_layers_warning_preference = "view/no_layers_warning" def __init__(self, parent = None) -> None: super().__init__(parent) self._max_layers = 0 self._current_layer_num = 0 self._minimum_layer_num = 0 self._current_layer_mesh = None self._current_layer_jumps = None self._top_layers_job = None # type: Optional["_CreateTopLayersJob"] self._activity = False self._old_max_layers = 0 self._max_paths = 0 self._current_path_num = 0 self._minimum_path_num = 0 self.currentLayerNumChanged.connect(self._onCurrentLayerNumChanged) self._current_feedrates = {} self._lengths_of_polyline ={} self._busy = False self._simulation_running = False self._ghost_shader = None # type: Optional["ShaderProgram"] self._layer_pass = None # type: Optional[SimulationPass] self._composite_pass = None # type: Optional[CompositePass] self._old_layer_bindings = None # type: Optional[List[str]] self._simulationview_composite_shader = None # type: Optional["ShaderProgram"] self._old_composite_shader = None # type: Optional["ShaderProgram"] self._max_feedrate = sys.float_info.min self._min_feedrate = sys.float_info.max self._max_thickness = sys.float_info.min self._min_thickness = sys.float_info.max self._max_line_width = sys.float_info.min self._min_line_width = sys.float_info.max self._min_flow_rate = sys.float_info.max self._max_flow_rate = sys.float_info.min self._global_container_stack = None # type: Optional[ContainerStack] self._proxy = None self._resetSettings() self._legend_items = None self._show_travel_moves = False self._nozzle_node = None # type: Optional[NozzleNode] Application.getInstance().getPreferences().addPreference("view/top_layer_count", 5) Application.getInstance().getPreferences().addPreference("view/only_show_top_layers", False) Application.getInstance().getPreferences().addPreference("view/force_layer_view_compatibility_mode", False) Application.getInstance().getPreferences().addPreference("layerview/layer_view_type", 1) # Default to "Line Type". Application.getInstance().getPreferences().addPreference("layerview/extruder_opacities", "") Application.getInstance().getPreferences().addPreference("layerview/show_travel_moves", False) Application.getInstance().getPreferences().addPreference("layerview/show_helpers", True) Application.getInstance().getPreferences().addPreference("layerview/show_skin", True) Application.getInstance().getPreferences().addPreference("layerview/show_infill", True) Application.getInstance().getPreferences().addPreference("layerview/show_starts", True) self.visibleStructuresChanged.connect(self.calculateColorSchemeLimits) self._updateWithPreferences() self._solid_layers = int(Application.getInstance().getPreferences().getValue("view/top_layer_count")) self._only_show_top_layers = bool(Application.getInstance().getPreferences().getValue("view/only_show_top_layers")) self._compatibility_mode = self._evaluateCompatibilityMode() self._slice_first_warning_message = Message(catalog.i18nc("@info:status", "Nothing is shown because you need to slice first."), title = catalog.i18nc("@info:title", "No layers to show"), option_text = catalog.i18nc("@info:option_text", "Do not show this message again"), option_state = False, message_type = Message.MessageType.WARNING) self._slice_first_warning_message.optionToggled.connect(self._onDontAskMeAgain) CuraApplication.getInstance().getPreferences().addPreference(self._no_layers_warning_preference, True) QtApplication.getInstance().engineCreatedSignal.connect(self._onEngineCreated) def _onEngineCreated(self) -> None: plugin_path = PluginRegistry.getInstance().getPluginPath(self.getPluginId()) if plugin_path: self.addDisplayComponent("main", os.path.join(plugin_path, "SimulationViewMainComponent.qml")) self.addDisplayComponent("menu", os.path.join(plugin_path, "SimulationViewMenuComponent.qml")) else: Logger.log("e", "Unable to find the path for %s", self.getPluginId()) def _evaluateCompatibilityMode(self) -> bool: return OpenGLContext.isLegacyOpenGL() or bool(Application.getInstance().getPreferences().getValue("view/force_layer_view_compatibility_mode")) def _resetSettings(self) -> None: self._layer_view_type = 0 # type: int # 0 is material color, 1 is color by linetype, 2 is speed, 3 is layer thickness self._extruder_count = 0 self._extruder_opacity = [[1.0, 1.0, 1.0, 1.0], [1.0, 1.0, 1.0, 1.0], [1.0, 1.0, 1.0, 1.0], [1.0, 1.0, 1.0, 1.0]] self._show_travel_moves = False self._show_helpers = True self._show_skin = True self._show_infill = True self._show_starts = True self.resetLayerData() def getActivity(self) -> bool: return self._activity def setActivity(self, activity: bool) -> None: if self._activity == activity: return self._activity = activity self._updateSliceWarningVisibility() self.activityChanged.emit() def getSimulationPass(self) -> SimulationPass: if not self._layer_pass: # Currently the RenderPass constructor requires a size > 0 # This should be fixed in RenderPass's constructor. self._layer_pass = SimulationPass(1, 1) self._compatibility_mode = self._evaluateCompatibilityMode() self._layer_pass.setSimulationView(self) return self._layer_pass def getCurrentLayer(self) -> int: return self._current_layer_num def getMinimumLayer(self) -> int: return self._minimum_layer_num def getMaxLayers(self) -> int: return self._max_layers def getCurrentPath(self) -> int: return self._current_path_num def getMinimumPath(self) -> int: return self._minimum_path_num def getMaxPaths(self) -> int: return self._max_paths def getNozzleNode(self) -> NozzleNode: if not self._nozzle_node: self._nozzle_node = NozzleNode() return self._nozzle_node def _onSceneChanged(self, node: "SceneNode") -> None: if node.getMeshData() is None: return self.setActivity(False) self.calculateColorSchemeLimits() self.calculateMaxLayers() self.calculateMaxPathsOnLayer(self._current_layer_num) def isBusy(self) -> bool: return self._busy def setBusy(self, busy: bool) -> None: if busy != self._busy: self._busy = busy self.busyChanged.emit() def isSimulationRunning(self) -> bool: return self._simulation_running def setSimulationRunning(self, running: bool) -> None: self._simulation_running = running def resetLayerData(self) -> None: self._current_layer_mesh = None self._current_layer_jumps = None def beginRendering(self) -> None: scene = self.getController().getScene() renderer = self.getRenderer() if renderer is None: return if not self._ghost_shader: self._ghost_shader = OpenGL.getInstance().createShaderProgram(Resources.getPath(Resources.Shaders, "color.shader")) theme = CuraApplication.getInstance().getTheme() if theme is not None: self._ghost_shader.setUniformValue("u_color", Color(*theme.getColor("layerview_ghost").getRgb())) for node in DepthFirstIterator(scene.getRoot()): # We do not want to render ConvexHullNode as it conflicts with the bottom layers. # However, it is somewhat relevant when the node is selected, so do render it then. if type(node) is ConvexHullNode and not Selection.isSelected(cast(ConvexHullNode, node).getWatchedNode()): continue if not node.render(renderer): if (node.getMeshData()) and node.isVisible(): renderer.queueNode(node, transparent = True, shader = self._ghost_shader) def setLayer(self, value: int) -> None: """ Set the upper end of the range of visible layers. If setting it below the lower end of the range, the lower end is lowered so that 1 layer stays visible. :param value: The new layer number to show, 0-indexed. """ if self._current_layer_num != value: self._current_layer_num = min(max(value, 0), self._max_layers) self._minimum_layer_num = min(self._current_layer_num, self._minimum_layer_num) self._startUpdateTopLayers() self.currentLayerNumChanged.emit() def setMinimumLayer(self, value: int) -> None: """ Set the lower end of the range of visible layers. If setting it above the upper end of the range, the upper end is increased so that 1 layer stays visible. :param value: The new lower end of the range of visible layers, 0-indexed. """ if self._minimum_layer_num != value: self._minimum_layer_num = min(max(value, 0), self._max_layers) self._current_layer_num = max(self._current_layer_num, self._minimum_layer_num) self._startUpdateTopLayers() self.currentLayerNumChanged.emit() def setPath(self, value: int) -> None: """ Set the upper end of the range of visible paths on the current layer. If setting it below the lower end of the range, the lower end is lowered so that 1 path stays visible. :param value: The new path index to show, 0-indexed. """ if self._current_path_num != value: self._current_path_num = min(max(value, 0), self._max_paths) self._minimum_path_num = min(self._minimum_path_num, self._current_path_num) self._startUpdateTopLayers() self.currentPathNumChanged.emit() def setMinimumPath(self, value: int) -> None: """ Set the lower end of the range of visible paths on the current layer. If setting it above the upper end of the range, the upper end is increased so that 1 path stays visible. :param value: The new lower end of the range of visible paths, 0-indexed. """ if self._minimum_path_num != value: self._minimum_path_num = min(max(value, 0), self._max_paths) self._current_path_num = max(self._current_path_num, self._minimum_path_num) self._startUpdateTopLayers() self.currentPathNumChanged.emit() def setSimulationViewType(self, layer_view_type: int) -> None: """Set the layer view type :param layer_view_type: integer as in SimulationView.qml and this class """ if layer_view_type != self._layer_view_type: self._layer_view_type = layer_view_type self.currentLayerNumChanged.emit() def getSimulationViewType(self) -> int: """Return the layer view type, integer as in SimulationView.qml and this class""" return self._layer_view_type def setExtruderOpacity(self, extruder_nr: int, opacity: float) -> None: """Set the extruder opacity :param extruder_nr: 0..15 :param opacity: 0.0 .. 1.0 """ if 0 <= extruder_nr <= 15: self._extruder_opacity[extruder_nr // 4][extruder_nr % 4] = opacity self.currentLayerNumChanged.emit() def getExtruderOpacities(self) -> Matrix: # NOTE: Extruder opacities are stored in a matrix for (minor) performance reasons (w.r.t. OpenGL/shaders). # If more than 16 extruders are called for, this should be converted to a sampler1d. return Matrix(self._extruder_opacity) def setShowTravelMoves(self, show: bool) -> None: if show == self._show_travel_moves: return self._show_travel_moves = show self.currentLayerNumChanged.emit() self.visibleStructuresChanged.emit() def getShowTravelMoves(self) -> bool: return self._show_travel_moves def setShowHelpers(self, show: bool) -> None: if show == self._show_helpers: return self._show_helpers = show self.currentLayerNumChanged.emit() self.visibleStructuresChanged.emit() def getShowHelpers(self) -> bool: return self._show_helpers def setShowSkin(self, show: bool) -> None: if show == self._show_skin: return self._show_skin = show self.currentLayerNumChanged.emit() self.visibleStructuresChanged.emit() def getShowSkin(self) -> bool: return self._show_skin def setShowInfill(self, show: bool) -> None: if show == self._show_infill: return self._show_infill = show self.currentLayerNumChanged.emit() self.visibleStructuresChanged.emit() def getShowInfill(self) -> bool: return self._show_infill def setShowStarts(self, show: bool) -> None: if show == self._show_starts: return self._show_starts = show self.currentLayerNumChanged.emit() self.visibleStructuresChanged.emit() def getShowStarts(self) -> bool: return self._show_starts def getCompatibilityMode(self) -> bool: return self._compatibility_mode def getExtruderCount(self) -> int: return self._extruder_count def getMinFeedrate(self) -> float: if abs(self._min_feedrate - sys.float_info.max) < 10: # Some lenience due to floating point rounding. return 0.0 # If it's still max-float, there are no measurements. Use 0 then. return self._min_feedrate def getMaxFeedrate(self) -> float: return self._max_feedrate def getSimulationTime(self, currentIndex) -> float: try: return (self._lengths_of_polyline[self._current_layer_num][currentIndex] / self._current_feedrates[self._current_layer_num][currentIndex])[0] except: # In case of change in layers, currentIndex comes one more than the items in the lengths_of_polyline # We give 1 second time for layer change return 1.0 def getMinThickness(self) -> float: if abs(self._min_thickness - sys.float_info.max) < 10: # Some lenience due to floating point rounding. return 0.0 # If it's still max-float, there are no measurements. Use 0 then. return self._min_thickness def getMaxThickness(self) -> float: return self._max_thickness def getMaxLineWidth(self) -> float: return self._max_line_width def getMinLineWidth(self) -> float: if abs(self._min_line_width - sys.float_info.max) < 10: # Some lenience due to floating point rounding. return 0.0 # If it's still max-float, there are no measurements. Use 0 then. return self._min_line_width def getMaxFlowRate(self) -> float: return self._max_flow_rate def getMinFlowRate(self) -> float: if abs(self._min_flow_rate - sys.float_info.max) < 10: # Some lenience due to floating point rounding. return 0.0 # If it's still max-float, there are no measurements. Use 0 then. return self._min_flow_rate def calculateMaxLayers(self) -> None: """ Calculates number of layers, triggers signals if the number of layers changed and makes sure the top layers are recalculated for legacy layer view. """ scene = self.getController().getScene() self._old_max_layers = self._max_layers new_max_layers = -1 for node in DepthFirstIterator(scene.getRoot()): # type: ignore layer_data = node.callDecoration("getLayerData") if not layer_data: continue self.setActivity(True) min_layer_number = sys.maxsize max_layer_number = -sys.maxsize for layer_id in layer_data.getLayers(): # If a layer doesn't contain any polygons, skip it (for infill meshes taller than print objects if len(layer_data.getLayer(layer_id).polygons) < 1: continue if max_layer_number < layer_id: max_layer_number = layer_id if min_layer_number > layer_id: min_layer_number = layer_id layer_count = max_layer_number - min_layer_number if new_max_layers < layer_count: new_max_layers = layer_count if new_max_layers >= 0 and new_max_layers != self._old_max_layers: self._max_layers = new_max_layers # The qt slider has a bit of weird behavior that if the maxvalue needs to be changed first # if it's the largest value. If we don't do this, we can have a slider block outside of the # slider. if new_max_layers > self._current_layer_num: self.maxLayersChanged.emit() self.setLayer(int(self._max_layers)) else: self.setLayer(int(self._max_layers)) self.maxLayersChanged.emit() self._startUpdateTopLayers() def calculateColorSchemeLimits(self) -> None: """ Calculates the limits of the colour schemes, depending on the layer view data that is visible to the user. """ # Before we start, save the old values so that we can tell if any of the spectrums need to change. old_min_feedrate = self._min_feedrate old_max_feedrate = self._max_feedrate old_min_linewidth = self._min_line_width old_max_linewidth = self._max_line_width old_min_thickness = self._min_thickness old_max_thickness = self._max_thickness old_min_flow_rate = self._min_flow_rate old_max_flow_rate = self._max_flow_rate self._min_feedrate = sys.float_info.max self._max_feedrate = sys.float_info.min self._min_line_width = sys.float_info.max self._max_line_width = sys.float_info.min self._min_thickness = sys.float_info.max self._max_thickness = sys.float_info.min self._min_flow_rate = sys.float_info.max self._max_flow_rate = sys.float_info.min # The colour scheme is only influenced by the visible lines, so filter the lines by if they should be visible. visible_line_types = [] if self.getShowSkin(): # Actually "shell". visible_line_types.append(LayerPolygon.SkinType) visible_line_types.append(LayerPolygon.Inset0Type) visible_line_types.append(LayerPolygon.InsetXType) if self.getShowInfill(): visible_line_types.append(LayerPolygon.InfillType) if self.getShowHelpers(): visible_line_types.append(LayerPolygon.PrimeTowerType) visible_line_types.append(LayerPolygon.SkirtType) visible_line_types.append(LayerPolygon.SupportType) visible_line_types.append(LayerPolygon.SupportInfillType) visible_line_types.append(LayerPolygon.SupportInterfaceType) visible_line_types_with_extrusion = visible_line_types.copy() # Copy before travel moves are added if self.getShowTravelMoves(): visible_line_types.append(LayerPolygon.MoveCombingType) visible_line_types.append(LayerPolygon.MoveRetractionType) for node in DepthFirstIterator(self.getController().getScene().getRoot()): layer_data = node.callDecoration("getLayerData") if not layer_data: continue for layer_index in layer_data.getLayers(): for polyline in layer_data.getLayer(layer_index).polygons: is_visible = numpy.isin(polyline.types, visible_line_types) visible_indices = numpy.where(is_visible)[0] visible_indicies_with_extrusion = numpy.where(numpy.isin(polyline.types, visible_line_types_with_extrusion))[0] if visible_indices.size == 0: # No items to take maximum or minimum of. continue self._lengths_of_polyline[layer_index] = polyline.lineLengths visible_feedrates = numpy.take(polyline.lineFeedrates, visible_indices) visible_feedrates_with_extrusion = numpy.take(polyline.lineFeedrates, visible_indicies_with_extrusion) self._current_feedrates[layer_index] = polyline.lineFeedrates visible_linewidths = numpy.take(polyline.lineWidths, visible_indices) visible_linewidths_with_extrusion = numpy.take(polyline.lineWidths, visible_indicies_with_extrusion) visible_thicknesses = numpy.take(polyline.lineThicknesses, visible_indices) visible_thicknesses_with_extrusion = numpy.take(polyline.lineThicknesses, visible_indicies_with_extrusion) self._max_feedrate = max(float(visible_feedrates.max()), self._max_feedrate) if visible_feedrates_with_extrusion.size != 0: flow_rates = visible_feedrates_with_extrusion * visible_linewidths_with_extrusion * visible_thicknesses_with_extrusion self._min_flow_rate = min(float(flow_rates.min()), self._min_flow_rate) self._max_flow_rate = max(float(flow_rates.max()), self._max_flow_rate) self._min_feedrate = min(float(visible_feedrates.min()), self._min_feedrate) self._max_line_width = max(float(visible_linewidths.max()), self._max_line_width) self._min_line_width = min(float(visible_linewidths.min()), self._min_line_width) self._max_thickness = max(float(visible_thicknesses.max()), self._max_thickness) try: self._min_thickness = min(float(visible_thicknesses[numpy.nonzero(visible_thicknesses)].min()), self._min_thickness) except ValueError: # Sometimes, when importing a GCode the line thicknesses are zero and so the minimum (avoiding the zero) can't be calculated. Logger.log("w", "Min thickness can't be calculated because all the values are zero") if old_min_feedrate != self._min_feedrate or old_max_feedrate != self._max_feedrate \ or old_min_linewidth != self._min_line_width or old_max_linewidth != self._max_line_width \ or old_min_thickness != self._min_thickness or old_max_thickness != self._max_thickness \ or old_min_flow_rate != self._min_flow_rate or old_max_flow_rate != self._max_flow_rate: self.colorSchemeLimitsChanged.emit() def calculateMaxPathsOnLayer(self, layer_num: int) -> None: # Update the currentPath scene = self.getController().getScene() for node in DepthFirstIterator(scene.getRoot()): # type: ignore layer_data = node.callDecoration("getLayerData") if not layer_data: continue layer = layer_data.getLayer(layer_num) if layer is None: return new_max_paths = layer.lineMeshElementCount() if new_max_paths >= 0 and new_max_paths != self._max_paths: self._max_paths = new_max_paths self.maxPathsChanged.emit() self.setPath(int(new_max_paths)) maxLayersChanged = Signal() maxPathsChanged = Signal() currentLayerNumChanged = Signal() currentPathNumChanged = Signal() globalStackChanged = Signal() preferencesChanged = Signal() busyChanged = Signal() activityChanged = Signal() visibleStructuresChanged = Signal() colorSchemeLimitsChanged = Signal() def getProxy(self, engine, script_engine): """Hackish way to ensure the proxy is already created which ensures that the layerview.qml is already created as this caused some issues. """ if self._proxy is None: self._proxy = SimulationViewProxy(self) return self._proxy def endRendering(self) -> None: pass def event(self, event) -> bool: modifiers = QApplication.keyboardModifiers() ctrl_is_active = modifiers & Qt.KeyboardModifier.ControlModifier shift_is_active = modifiers & Qt.KeyboardModifier.ShiftModifier if event.type == Event.KeyPressEvent and ctrl_is_active: amount = 10 if shift_is_active else 1 if event.key == KeyEvent.UpKey: self.setLayer(self._current_layer_num + amount) return True if event.key == KeyEvent.DownKey: self.setLayer(self._current_layer_num - amount) return True if event.type == Event.ViewActivateEvent: # Start listening to changes. Application.getInstance().getPreferences().preferenceChanged.connect(self._onPreferencesChanged) self._controller.getScene().getRoot().childrenChanged.connect(self._onSceneChanged) self.calculateColorSchemeLimits() self.calculateMaxLayers() self.calculateMaxPathsOnLayer(self._current_layer_num) # FIX: on Max OS X, somehow QOpenGLContext.currentContext() can become None during View switching. # This can happen when you do the following steps: # 1. Start Cura # 2. Load a model # 3. Switch to Custom mode # 4. Select the model and click on the per-object tool icon # 5. Switch view to Layer view or X-Ray # 6. Cura will very likely crash # It seems to be a timing issue that the currentContext can somehow be empty, but I have no clue why. # This fix tries to reschedule the view changing event call on the Qt thread again if the current OpenGL # context is None. if Platform.isOSX(): if QOpenGLContext.currentContext() is None: Logger.log("d", "current context of OpenGL is empty on Mac OS X, will try to create shaders later") CuraApplication.getInstance().callLater(lambda e=event: self.event(e)) return False # Make sure the SimulationPass is created layer_pass = self.getSimulationPass() renderer = self.getRenderer() if renderer is None: return False renderer.addRenderPass(layer_pass) # Make sure the NozzleNode is add to the root nozzle = self.getNozzleNode() nozzle.setParent(self.getController().getScene().getRoot()) nozzle.setVisible(False) Application.getInstance().globalContainerStackChanged.connect(self._onGlobalStackChanged) self._onGlobalStackChanged() if not self._simulationview_composite_shader: plugin_path = cast(str, PluginRegistry.getInstance().getPluginPath("SimulationView")) self._simulationview_composite_shader = OpenGL.getInstance().createShaderProgram(os.path.join(plugin_path, "simulationview_composite.shader")) theme = CuraApplication.getInstance().getTheme() if theme is not None: self._simulationview_composite_shader.setUniformValue("u_background_color", Color(*theme.getColor("viewport_background").getRgb())) self._simulationview_composite_shader.setUniformValue("u_outline_color", Color(*theme.getColor("model_selection_outline").getRgb())) if not self._composite_pass: self._composite_pass = cast(CompositePass, renderer.getRenderPass("composite")) self._old_layer_bindings = self._composite_pass.getLayerBindings()[:] # make a copy so we can restore to it later self._composite_pass.getLayerBindings().append("simulationview") self._old_composite_shader = self._composite_pass.getCompositeShader() self._composite_pass.setCompositeShader(self._simulationview_composite_shader) self._updateSliceWarningVisibility() elif event.type == Event.ViewDeactivateEvent: self._controller.getScene().getRoot().childrenChanged.disconnect(self._onSceneChanged) Application.getInstance().getPreferences().preferenceChanged.disconnect(self._onPreferencesChanged) self._slice_first_warning_message.hide() Application.getInstance().globalContainerStackChanged.disconnect(self._onGlobalStackChanged) if self._nozzle_node: self._nozzle_node.setParent(None) renderer = self.getRenderer() if renderer is None: return False if self._layer_pass is not None: renderer.removeRenderPass(self._layer_pass) if self._composite_pass: self._composite_pass.setLayerBindings(cast(List[str], self._old_layer_bindings)) self._composite_pass.setCompositeShader(cast(ShaderProgram, self._old_composite_shader)) return False def getCurrentLayerMesh(self): return self._current_layer_mesh def getCurrentLayerJumps(self): return self._current_layer_jumps def _onGlobalStackChanged(self) -> None: self._global_container_stack = Application.getInstance().getGlobalContainerStack() if self._global_container_stack: self._extruder_count = self._global_container_stack.getProperty("machine_extruder_count", "value") self.globalStackChanged.emit() def _onCurrentLayerNumChanged(self) -> None: self.calculateMaxPathsOnLayer(self._current_layer_num) scene = Application.getInstance().getController().getScene() scene.sceneChanged.emit(scene.getRoot()) def _startUpdateTopLayers(self) -> None: if not self._compatibility_mode: return if self._top_layers_job: self._top_layers_job.finished.disconnect(self._updateCurrentLayerMesh) self._top_layers_job.cancel() self.setBusy(True) self._top_layers_job = _CreateTopLayersJob(self._controller.getScene(), self._current_layer_num, self._solid_layers) self._top_layers_job.finished.connect(self._updateCurrentLayerMesh) # type: ignore # mypy doesn't understand the whole private class thing that's going on here. self._top_layers_job.start() # type: ignore def _updateCurrentLayerMesh(self, job: "_CreateTopLayersJob") -> None: self.setBusy(False) if not job.getResult(): return self.resetLayerData() # Reset the layer data only when job is done. Doing it now prevents "blinking" data. self._current_layer_mesh = job.getResult().get("layers") if self._show_travel_moves: self._current_layer_jumps = job.getResult().get("jumps") self._controller.getScene().sceneChanged.emit(self._controller.getScene().getRoot()) self._top_layers_job = None def _updateWithPreferences(self) -> None: self._solid_layers = int(Application.getInstance().getPreferences().getValue("view/top_layer_count")) self._only_show_top_layers = bool(Application.getInstance().getPreferences().getValue("view/only_show_top_layers")) self._compatibility_mode = self._evaluateCompatibilityMode() self.setSimulationViewType(int(float(Application.getInstance().getPreferences().getValue("layerview/layer_view_type")))) for extruder_nr, extruder_opacity in enumerate(Application.getInstance().getPreferences().getValue("layerview/extruder_opacities").split("|")): try: opacity = float(extruder_opacity) except ValueError: opacity = 1.0 self.setExtruderOpacity(extruder_nr, opacity) self.setShowTravelMoves(bool(Application.getInstance().getPreferences().getValue("layerview/show_travel_moves"))) self.setShowHelpers(bool(Application.getInstance().getPreferences().getValue("layerview/show_helpers"))) self.setShowSkin(bool(Application.getInstance().getPreferences().getValue("layerview/show_skin"))) self.setShowInfill(bool(Application.getInstance().getPreferences().getValue("layerview/show_infill"))) self.setShowStarts(bool(Application.getInstance().getPreferences().getValue("layerview/show_starts"))) self._startUpdateTopLayers() self.preferencesChanged.emit() def _onPreferencesChanged(self, preference: str) -> None: if preference not in { "view/top_layer_count", "view/only_show_top_layers", "view/force_layer_view_compatibility_mode", "layerview/layer_view_type", "layerview/extruder_opacities", "layerview/show_travel_moves", "layerview/show_helpers", "layerview/show_skin", "layerview/show_infill", "layerview/show_starts", }: return self._updateWithPreferences() def _updateSliceWarningVisibility(self): if not self.getActivity()\ and not CuraApplication.getInstance().getPreferences().getValue("general/auto_slice")\ and CuraApplication.getInstance().getPreferences().getValue(self._no_layers_warning_preference): self._slice_first_warning_message.show() else: self._slice_first_warning_message.hide() def _onDontAskMeAgain(self, checked: bool) -> None: CuraApplication.getInstance().getPreferences().setValue(self._no_layers_warning_preference, not checked) class _CreateTopLayersJob(Job): def __init__(self, scene: "Scene", layer_number: int, solid_layers: int) -> None: super().__init__() self._scene = scene self._layer_number = layer_number self._solid_layers = solid_layers self._cancel = False def run(self) -> None: layer_data = None for node in DepthFirstIterator(self._scene.getRoot()): # type: ignore layer_data = node.callDecoration("getLayerData") if layer_data: break if self._cancel or not layer_data: return layer_mesh = MeshBuilder() for i in range(self._solid_layers): layer_number = self._layer_number - i if layer_number < 0: continue try: layer = layer_data.getLayer(layer_number).createMesh() except Exception: Logger.logException("w", "An exception occurred while creating layer mesh.") return if not layer or layer.getVertices() is None: continue layer_mesh.addIndices(layer_mesh.getVertexCount() + layer.getIndices()) layer_mesh.addVertices(layer.getVertices()) # Scale layer color by a brightness factor based on the current layer number # This will result in a range of 0.5 - 1.0 to multiply colors by. brightness = numpy.ones((1, 4), dtype=numpy.float32) * (2.0 - (i / self._solid_layers)) / 2.0 brightness[0, 3] = 1.0 layer_mesh.addColors(layer.getColors() * brightness) if self._cancel: return Job.yieldThread() if self._cancel: return Job.yieldThread() jump_mesh = layer_data.getLayer(self._layer_number).createJumps() if not jump_mesh or jump_mesh.getVertices() is None: jump_mesh = None self.setResult({"layers": layer_mesh.build(), "jumps": jump_mesh}) def cancel(self) -> None: self._cancel = True super().cancel()