{
    "version": 2,
    "name": "Vivedino T-REX 3",
    "inherits": "vivedino_base",
    "metadata":
    {
        "visible": true,
        "platform": "vivedino_trex.stl",
        "machine_extruder_trains":
        {
            "0": "trex_extruder_0",
            "1": "trex_extruder_1"
        },
        "quality_definition": "vivedino_trex3"
    },
    "overrides":
    {
        "gantry_height": { "value": 30 },
        "machine_depth": { "default_value": 400 },
        "machine_end_gcode": { "default_value": "G28 X0 Y0\nM104 S0 T1 ; turn off extruder\nM104 S0 T0\nM140 S0 ; turn off bed\nG28 X0\nM106 P0 S0\nM106 P1 S0\nM84 S0\nM84 XYE; disable motors except Z" },
        "machine_extruder_count": { "default_value": 2 },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-30, 34],
                [-30, -32],
                [30, -32],
                [30, 34]
            ]
        },
        "machine_heat_zone_length": { "value": "10" },
        "machine_height": { "default_value": 500 },
        "machine_start_gcode": { "default_value": "M605 S1 ; Set dual carriage mode S0 slicer full control | S1 AutoPark inactive head | S2 duplicate\nT0\nM106 P0 S[fan_speed_pwm]\nM106 P1 S[fan_speed_pwm]\nG28 ; home all axes\nM420 S1 ; Enable bed leveling compensation using current grid/mesh\nG1 X-42 F8000\nG92 E0\nG1 E5 F500\nG1 X0 F5000\nG1 X-40\nG1 X0\nG1 X-40\nG1 X0\nG1 X-40\nG1 X200\nG1 Y200 F5000\nT1\nG1 X440 F8000 ; park T0 head at X=440\nG92 E0 ; Zero extruder count" },
        "machine_width": { "default_value": 400 },
        "retraction_amount": { "value": "2" }
    }
}