{
    "version":                 2,
    "name":                    "Deltacomb DC-21 Flux",
    "inherits":                "deltacomb_base",

    "metadata": {
        "visible":                 true,
        "platform":                "deltacomb_dc20.stl",
        "quality_definition":      "deltacomb_base",
        "preferred_variant_name":  "FBE 0.40mm",
        "machine_extruder_trains": {
            "0": "deltacomb_dc20flux_extruder_0",
            "1": "deltacomb_dc20flux_extruder_1",
            "2": "deltacomb_dc20flux_extruder_2",
            "3": "deltacomb_dc20flux_extruder_3"
          }
    },

    "overrides": {
        "machine_name":                       { "default_value": "Deltacomb DC-21 FLUX" },
        "machine_width":                      { "default_value": 190 },
        "machine_depth":                      { "default_value": 190 },
        "machine_height":                     { "default_value": 400 },
        "machine_extruder_count":             { "default_value": 2, "maximum_value": "4" },
        "machine_end_gcode":                  { "default_value": ";---------------------------------------\n;Deltacomb end script\n;---------------------------------------\nG91 ;relative positioning\nG1 X8.0 E-10 F6000 ;wipe filament+material retraction\nG1 Z2 E9 ;Lift and start filament shaping\nG1 E-9\nG1 E8\nG1 E-8\nG1 E-10 F110\nG1 E-40 F5000 ; move to park position\nG28 ;home all axes (max endstops)\nM84 ;steppers off" },
        "switch_extruder_retraction_amount":  { "value": "0" },
        "prime_tower_min_volume":             { "value": "50" },
        "prime_tower_enable":                 { "value": true },
        "material_initial_print_temperature": { "value": "material_print_temperature" },
        "material_final_print_temperature":   { "value": "material_print_temperature" },
        "material_standby_temperature":       { "value": "material_print_temperature" }
    }
}