{
    "version": 2,
    "name": "Alya",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Alya",
        "manufacturer": "Kati Hal ARGE",
        "file_formats": "text/x-gcode",
        "platform": "alya_platform.3mf",
        "platform_offset": [-60, -45, 75 ],
        "exclude_materials": ["chromatik_pla", "dsm_arnitel2045_175", "dsm_novamid1070_175", "fabtotum_abs", "fabtotum_nylon", "fabtotum_pla", "fabtotum_tpu", "fiberlogy_hd_pla", "filo3d_pla", "filo3d_pla_green", "filo3d_pla_red", "generic_abs", "generic_abs_175", "generic_bam", "generic_cpe", "generic_cpe_175", "generic_cpe_plus", "generic_hips", "generic_hips_175", "generic_nylon", "generic_nylon_175", "generic_pc", "generic_pc_175", "generic_petg", "generic_petg_175", "generic_pp", "generic_pva", "generic_pva_175", "generic_tough_pla", "generic_tpu", "generic_tpu_175", "imade3d_petg_green", "imade3d_petg_pink", "imade3d_pla_green", "imade3d_pla_pink", "innofill_innoflex60_175", "octofiber_pla", "polyflex_pla", "polymax_pla", "polyplus_pla", "polywood_pla", "verbatim_bvoh_175", "Vertex_Delta_ABS", "Vertex_Delta_PET", "Vertex_Delta_PLA", "Vertex_Delta_TPU", "zyyx_pro_flex", "zyyx_pro_pla","tizyx_pla","tizyx_abs","tizyx_pla_bois" ],
        "preferred_material": "generic_pla",
        "has_machine_quality": true,
        "has_materials": true,
        "has_variants": false,
        "supports_usb_connection": false,
        "machine_extruder_trains":
        {
            "0": "alya3dp_extruder_0"
        }
    },

    "overrides": {
        "machine_name": { "default_value": "ALYA 3DP" },
        "machine_heated_bed":          {   "default_value": false            },
        "machine_width":               {   "default_value": 100             },
        "machine_height":              {   "default_value": 133             },
        "machine_depth":               {   "default_value": 100             },
        "machine_center_is_zero":      {   "default_value": false           },
        "gantry_height":               {   "value": "55"},
        "retraction_amount":           {   "default_value": 1.5 },
        "support_enable":              {   "default_value": true},
        "machine_head_with_fans_polygon": {
            "default_value": [[75, 18],[18, 18],[18, 35],[75, 35]]
        },
        "adhesion_type": {"options": {"raft": "Raft" ,"none": "None", "brim": "Brim"},  "default_value": "raft"},
        "machine_gcode_flavor":        {   "default_value": "RepRap (Marlin/Sprinter)"      },
        "machine_start_gcode":
        {
            "default_value": ";Sliced at: {day} {date} {time} \n ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} \n ;Print time: {print_time} \n ;Filament used: {filament_amount}m {filament_weight}g \n ;Filament cost: {filament_cost} \n G28 X0 Y0  ;move X Y to endstops \n G28 Z0     ;move Z to endstops \n ; M190 S{material_bed_temperature} ;bed temp \n M107 ; switch fan off \n M109 S{material_print_temperature} ;extruder temp set \n G1 F3000 \n G1 Z10 \n G92 E0                  ;zero the extruded length \n G1 F200 E1 ;extrude 1mm of feed stock \n G92 E0 ;zero the extruded length again \n  G4 P7000 ; wait 7000ms \n M117 Printing... ;Put printing message on LCD screen"
        },
        "machine_end_gcode":
        {
            "default_value": ";End GCode\nM104 S0 ;extruder heater off \nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
        }
    }
}