{
    "version": 2,
    "name": "Fusion3 F410",
    "inherits": "fusion3",
    "metadata":
    {
        "visible": true,
        "quality_definition": "fusion3"
    },
    "overrides":
    {
        "acceleration_print": { "value": "machine_acceleration" },
        "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
        "acceleration_travel": { "value": "machine_acceleration" },
        "acceleration_travel_layer_0": { "value": "acceleration_travel" },
        "adaptive_layer_height_variation": { "value": 0.04 },
        "adaptive_layer_height_variation_step": { "value": 0.04 },
        "adhesion_type": { "value": "'skirt'" },
        "bottom_layers": { "value": "math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))" },
        "brim_replaces_support": { "value": false },
        "cool_fan_full_at_height": { "value": "layer_height_0 * 4" },
        "cool_min_speed": { "value": "speed_print * 0.3" },
        "gantry_height": { "value": 40 },
        "infill_before_walls": { "value": false },
        "infill_overlap": { "value": 20.0 },
        "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 89 else 'lines' if infill_sparse_density > 31 else 'cubic'" },
        "infill_wipe_dist": { "value": 0.0 },
        "jerk_print": { "value": 10 },
        "jerk_travel": { "value": "jerk_print" },
        "jerk_travel_layer_0": { "value": "jerk_travel" },
        "machine_acceleration": { "value": 2000 },
        "machine_depth": { "default_value": 355 },
        "machine_end_gcode": { "default_value": "; Fusion3 F410 end code\nG91  ;relative positioning\nG1 E-5.00 F1000  ;retract 5mm of filament\nG1 Z+1.00 X-20.0 Y+20.0 F10000  ;short quick move to disengage from print\nG90  ;absolute positioning\nG1 X0.0 Y350.0 F9000  ; move head to back left corner\nG91  ; relative positioning\nG1 E-5.00 F500  ;retract additional filament to prevent oozing\nG90 ;absolute positioning\nM104 S0  ;turn off hotend\nM140 S0  ;turn off heatbed\n; Reset filament monitor\nM42 P63 S0\nG4 P100\nG4 P50\nM42 P63 S1\nG1 Z315 F1000 ;move print bed down to idle position\nM106 S0  ; shut off blower\nM84  ;motors off\nM561  ;clear bed probe transformation\n" },
        "machine_gcode_flavor": { "default_value": "RepRap (RepRap)" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-30, 30],
                [-30, -30],
                [30, -30],
                [30, 30]
            ]
        },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 315 },
        "machine_max_acceleration_x": { "value": 5000 },
        "machine_max_acceleration_y": { "value": 5000 },
        "machine_max_acceleration_z": { "value": 500 },
        "machine_max_feedrate_e": { "value": 166 },
        "machine_max_feedrate_x": { "value": 550 },
        "machine_max_feedrate_y": { "value": 550 },
        "machine_max_feedrate_z": { "value": 40 },
        "machine_max_jerk_e": { "value": 30 },
        "machine_max_jerk_z": { "value": 1 },
        "machine_name": { "default_value": "Fusion3 F410" },
        "machine_start_gcode": { "default_value": "; Fusion3 F410 start code\nM104 S0 ; shutdown heater and prepare to print\nG21  ; set units to mm\nG90  ; use absolute coordinates\nT0  ; select tool 0\nG92 E0.0  ; reset e count\nM220 S100 ; reset speed multiplier\nM140 S{material_bed_temperature_layer_0}  ; set bed temp and do not wait\nG32  ; call to run bed.g\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nM109 S{material_print_temperature_layer_0} ; set print head temperature and wait\n; === pause for heating ===\n; reset filament monitor\nM42 P63 S0\nG4 P100\nG4 P50\nM42 P63 S1\nG1 X350 Y0\nG1 Z10.0 F2000  ; move up\nG1 E10.0 F500  ; prime extruder\nG92 E0.0  ; reset e count\nG1 X330 Y15 F9000  ; move back\nG1 Z{layer_height_0} F1000  ; move down to begin wipe\nG1 X150 E4.0 F6000  ; wipe print head (extrude material while we do this)\nG92 E0.0  ; reset e count\n" },
        "machine_width": { "default_value": 355 },
        "material_final_print_temperature": { "value": "material_print_temperature" },
        "material_initial_print_temperature": { "value": "material_print_temperature" },
        "meshfix_maximum_resolution": { "value": "0.25" },
        "meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },
        "minimum_interface_area": { "value": 10 },
        "minimum_support_area": { "value": 2 },
        "optimize_wall_printing_order": { "value": "True" },
        "retract_at_layer_change": { "value": true },
        "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },
        "retraction_combing_max_distance": { "value": 30 },
        "retraction_count_max": { "value": 100 },
        "retraction_extrusion_window": { "value": 5 },
        "retraction_hop": { "value": 0.2 },
        "retraction_hop_enabled": { "value": true },
        "retraction_prime_speed":
        {
            "maximum_value": "machine_max_feedrate_e",
            "maximum_value_warning": "machine_max_feedrate_e *0.75"
        },
        "retraction_retract_speed":
        {
            "maximum_value": "machine_max_feedrate_e",
            "maximum_value_warning": "machine_max_feedrate_e *0.75"
        },
        "retraction_speed":
        {
            "default_value": 100,
            "maximum_value": "machine_max_feedrate_e",
            "maximum_value_warning": "machine_max_feedrate_e *0.75"
        },
        "skin_overlap": { "value": 10.0 },
        "skirt_gap": { "value": 10.0 },
        "skirt_line_count": { "value": 3 },
        "speed_infill": { "value": "speed_print *0.7" },
        "speed_layer_0": { "value": "speed_print *0.4" },
        "speed_prime_tower": { "value": "speed_topbottom" },
        "speed_print": { "value": 100 },
        "speed_support": { "value": "speed_wall_0" },
        "speed_support_interface": { "value": "speed_topbottom" },
        "speed_travel": { "value": "speed_print * 1.5" },
        "speed_travel_layer_0": { "value": "speed_travel *0.5" },
        "speed_wall": { "value": "speed_print *0.6" },
        "speed_wall_x": { "value": "speed_print *0.85" },
        "speed_z_hop": { "value": 5 },
        "support_angle": { "value": "math.floor(math.degrees(math.atan(line_width/2.0/layer_height)))" },
        "support_brim_enable": { "value": true },
        "support_brim_width": { "value": 4 },
        "support_infill_angles":
        {
            "value": [
                45
            ]
        },
        "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 30" },
        "support_interface_density": { "value": 33.333 },
        "support_interface_height": { "value": "layer_height * 4" },
        "support_interface_pattern": { "value": "'grid'" },
        "support_interface_skip_height": { "value": 0.2 },
        "support_pattern": { "value": "'zigzag'" },
        "support_wall_count": { "value": 0 },
        "support_xy_distance": { "value": "wall_line_width_0 * 3" },
        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
        "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
        "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
        "top_bottom_pattern": { "value": "'zigzag'" },
        "top_bottom_pattern_0": { "value": "'zigzag'" },
        "top_bottom_thickness":
        {
            "minimum_value_warning": "0.4",
            "value": "(layer_height*3) + layer_height_0"
        },
        "top_layers": { "value": "math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))" },
        "travel_avoid_other_parts": { "value": false },
        "travel_avoid_supports": { "value": true },
        "travel_retract_before_outer_wall": { "value": true },
        "wall_0_wipe_dist": { "value": 0.0 },
        "z_seam_corner": { "value": "'z_seam_corner_inner'" },
        "z_seam_type": { "value": "'sharpest_corner'" }
    }
}