Commit History

Author SHA1 Message Date
  c.lamboo 501b15753d Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles" 9 months ago
  casperlamboo 8fcdd09b7b Applied printer-linter format 9 months ago
  c.lamboo bc41b8f801 Use string for prime tower enum value 9 months ago
  Erwan MATHIEU e642d85fcd Merge remote-tracking branch 'origin/main' into optimized-prime-tower 9 months ago
  Erwan MATHIEU 5a291f9ba9 Change prime_tower_enable to prime_tower_mode in all defs/profiles 9 months ago
  Paul Kuiper 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 10 months ago
  MariMakes d8e6a2b0b4 Align S-line printers 1 year ago
  Paul Kuiper 41562f55b2 Restored PETG and ABS profiles. Lowered outerwall speed to 30mm/s. Reduced gradual flow for PETG and ABS. Added extra parameter to reduce inner wall speeds on top surface. 1 year ago
  Paul Kuiper 3128ffb34a Make 0.2m the default layer height for S line printer (iso 0.15mm). 1 year ago
  Jelle Spijker e3a4c84463 Merge remote-tracking branch 'origin/PP-336_Cleanup_infill_overlap_settings' 1 year ago
  Jelle Spijker ba5cd429c0 Merge pull request #15632 from Ultimaker/PP-81_Easy_to_tear_of_brim 1 year ago
  Frederic98 afc36fbfd9 Applied printer-linter format 1 year ago
  Frederic Meeuwissen eb2aa80ffa PP-81: Set brim_gap to horizontal expansion + 50um 1 year ago
  Paul Kuiper ed4ad6b8ef Cleanup skin overlap. Set to 20% by default for S line machines. 1 year ago
  Paul Kuiper ffbc7bb310 Cleanup of infill overlap setting. Make it 10% for S line machines and keep it 0% for the other machines. Removed all overwrites from the quality profiles. 1 year ago
  Bryan Foley 3b538d975c Revert "SEM-166 Apply suggestions from code review" 1 year ago
  Bryan Foley 21de7a3667 SEM-166 Apply suggestions from code review 1 year ago
  Bryan Foley 807f407d9f SEM-166 Add extra BOM numbers to UMs3, UMs5 and UMs7 1 year ago
  Rijk van Manen 9171aa9168 follow the default settings 1 year ago
  Paul Kuiper 7a671eaa03 Change preffered quality from normal (0.1mm) to fast (0.15mm) (#13974) 2 years ago
  Rijk van Manen 205902ee68 printer linter format 2 years ago
  Rijk van Manen 27d56d378e improve initial layer settings 2 years ago
  Jaime van Kessel 0dea6d7cca Merge branch 'PP-243-cleanup-raft-settings' of github.com:Ultimaker/Cura 2 years ago
  Jaime van Kessel ee551e48b3 Restore incorrectly removed settings 2 years ago
  Rijk van Manen 4712c6abc3 restructure raft airgap 2 years ago
  Rijk van Manen 179e6bdfb6 cleanup raft speeds 2 years ago
  Rijk van Manen e4534943e7 new raft base thickness default 2 years ago
  Rijk van Manen 08a5f07d53 raft interface line spacing can follow default 2 years ago
  Rijk van Manen 96569edcf0 raft middle line width has new default 2 years ago
  Rijk van Manen 257d37eb73 raft middle layer thickness has new default 2 years ago
  Rijk van Manen 834cc4129e cleanup raft top layers 2 years ago
  Rijk van Manen e742a6afa8 set raft margin to default of 15mm 2 years ago
  Rijk van Manen e64a48bc86 cleanup jerk settings 2 years ago
  Jaime van Kessel 370d0bcf03 Add extra BOM numbers to UMs3 and UMs5 2 years ago
  Jaime van Kessel 2c331604e8 Clean up a lot of duplicate settings from machine profiles 2 years ago
  Rijk van Manen 246fcae0f8 disable travel_avoid_supports 2 years ago
  Rijk van Manen 6d489659f2 Clean up of standby temperatures 2 years ago
  j.delarago cd34294914 Revert "disable travel_avoid_supports" 2 years ago
  p.kuiper 6e7e0b5f77 Switching on support gradual infill and support offset to 2*line width when support interface layer is enabled. 2 years ago
  Jaime van Kessel 952da63230 Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max 2 years ago
  Jaime van Kessel b42a06fddd Merge pull request #12418 from Ultimaker/PP-172-dont-avoid-supports 2 years ago
  p.kuiper fec4888989 Clean up of jerk settings. Moved the jerk setting up to ultimaker.def.json. Removed duplicate entries in quality profiles and removed a number of strange jerk entries in the quality profiles. 2 years ago
  Rijk van Manen 8f2dff712e disable travel_avoid_supports 2 years ago
  Rijk van Manen 3a2a58f546 remove setting, follow the default 2 years ago
  p.kuiper 20efe02d8b Also changed the jerk setting for support material to 20mm/s to prevent flow ringing in the support material and increase productivity. 2 years ago
  Rijk van Manen 44a33e0fed follow the defaults set in ultimaker.def.json 2 years ago
  Rijk van Manen bf131f539e remove all wall_thickness statements 2 years ago
  Rijk van Manen 209ca566cd update definitions of ultimaker2+C, S3 and S5 2 years ago
  Rijk van Manen 78aec480e7 change infill pattern to zigzag for >80% infill 3 years ago
  p.kuiper 43e7edda54 PP-60: Remove thin wall settings from the S5 profile 3 years ago