 Ghostkeeper
|
2a4c8aa3fd
Set default for 3rd-party printers to Inside-Out
|
2 years ago |
|
Rijk van Manen
|
b14774292f
reduce minimum support xy distance
|
2 years ago |
|
Rijk van Manen
|
a42a15199f
increase support horizontal expansion
|
2 years ago |
|
p.kuiper
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 years ago |
|
p.kuiper
|
633e80292d
Bug fix for tree support. Wall count should switch to 1 for tree support.
|
2 years ago |
|
p.kuiper
|
ba275c546e
Renoved settings that already have a good default value in fdmprinter.def.json. Added support_use_towers to the PVA quality files.
|
2 years ago |
|
p.kuiper
|
6b30273686
Made xy support distance to the wall 1mm iso support_offset (support_offset was 0mm when no support interface was used).
|
2 years ago |
|
p.kuiper
|
8e3ec5655a
Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA.
|
2 years ago |
|
p.kuiper
|
8ef3444b4a
Enable interface layer for BAM (also for PVA, but this was already enabled via the BB core variant).
|
2 years ago |
|
p.kuiper
|
ea929fdf46
Fixed typo in minium_support_area formula
|
2 years ago |
|
p.kuiper
|
79eb41e947
Add zigzag support pattern to ultimaker.def.json.
|
2 years ago |
|
p.kuiper
|
6e7e0b5f77
Switching on support gradual infill and support offset to 2*line width when support interface layer is enabled.
|
2 years ago |
|
p.kuiper
|
12ccb667b2
Bug fixes in ultimaker.def.json file. Formulas do not require '=' and strings must be double quoted.
|
2 years ago |
|
p.kuiper
|
6d50ab152d
Cleaned up of the support settings for the S5 quality modes.
|
2 years ago |
|
p.kuiper
|
fdc48495e5
Forgot a comma, fixed json.
|
2 years ago |
|
p.kuiper
|
647402375b
Merged in changes in from main.
|
2 years ago |
|
p.kuiper
|
d6f98b20ad
Merge branch 'main' into PP-108_Large_speed_up_in_PVA_support_printing
|
2 years ago |
|
Jaime van Kessel
|
afd7f5507d
Merge pull request #12394 from Ultimaker/PP-15-enable-skin-edge-support
|
2 years ago |
|
Jaime van Kessel
|
952da63230
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2 years ago |
|
Rijk van Manen
|
3a7341f761
Disable travel acceleration/jerk
|
2 years ago |
|
Rijk van Manen
|
a970e455d4
Merge branch 'main' into PP-15-enable-skin-edge-support
|
2 years ago |
|
p.kuiper
|
7916407951
Implementation of various support structure improvements as explained in ticket PP-108.
|
2 years ago |
|
Jaime van Kessel
|
2d1abf79a8
Merge pull request #12416 from Ultimaker/PP-46-print-infill-before-walls
|
2 years ago |
|
Jaime van Kessel
|
65e4b0e0d7
Merge pull request #12412 from Ultimaker/PP-19_also_increase_jerk_for_support
|
2 years ago |
|
Jaime van Kessel
|
9fc3357818
Merge pull request #12398 from Ultimaker/PP-93-enable-top-surface-skin-layers
|
2 years ago |
|
p.kuiper
|
977b81da7f
Removed duplicate entry bridge fan speed 3.
|
2 years ago |
|
p.kuiper
|
fec4888989
Clean up of jerk settings. Moved the jerk setting up to ultimaker.def.json. Removed duplicate entries in quality profiles and removed a number of strange jerk entries in the quality profiles.
|
2 years ago |
|
Rijk van Manen
|
877f8ca1cf
revert PP-37
|
2 years ago |
|
Rijk van Manen
|
14355aa904
default retraction limit settings
|
2 years ago |
|
Rijk van Manen
|
d352bbbbc5
reduce support interface flow
|
2 years ago |
|
Rijk van Manen
|
7c2b84184b
reduce top/bottom flow by enabling top surface skin layers
|
2 years ago |
|
Rijk van Manen
|
e543416deb
enable skin edge support
|
2 years ago |
|
p.kuiper
|
0db75501a3
Merge remote-tracking branch 'origin/main' into PP-3_improved_experimental_bridge_settings
|
2 years ago |
|
j.delarago
|
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
|
2 years ago |
|
p.kuiper
|
e24d2d15ae
Reduced horizontal expansion offset to the theoretically correct value of 0.1*layer_height if the correction is performed on both sides of the wall (then totals 0.2*layer_height).
|
2 years ago |
|
Rijk van Manen
|
df72cd8da4
new default settings for ultimaker printers
|
2 years ago |
|
Ghostkeeper
|
2d1b9c5409
Set Top Surface Layers to 0 and adjust flow to compensate
|
2 years ago |
|
p.kuiper
|
9fdeffd564
Better default for the experimental bridge settings. See PP-3 for details.
|
2 years ago |
|
Ghostkeeper
|
775d85b420
Merge branch 'PP-93_improve-top-bottom-flow'
|
2 years ago |
|
Jaime van Kessel
|
efdb60e153
Remove area_deviation from ultimaker.def.json
|
2 years ago |
|
Jaime van Kessel
|
40fc587d64
Merge pull request #11675 from Ultimaker/PP-115_unify-wall-thickness
|
2 years ago |
|
Rijk van Manen
|
943e126cb4
set wall thickness to two lines by default
|
2 years ago |
|
p.kuiper
|
a88cb2bb48
I accidently deleted the files while testing the profile changes and committed without them. Restored the files.
|
2 years ago |
|
p.kuiper
|
6f36998feb
Moved the horizontal layer expansion correction (corrects for the bulging of the extruded beads) from the engineering intent profiles to the default profiles for all ultimaker machines (ultimaker.def.json). This will improve the dimensional accuracy of the default, visual and draft intents.
|
2 years ago |
|
Rijk van Manen
|
826b697329
reduce top bottom flow
|
2 years ago |
|
Rijk van Manen
|
2e25b84184
reduce flow for high infill density
|
2 years ago |
|
Jaime van Kessel
|
571ee5525b
Merge branch 'libArachne_rebased' of github.com:Ultimaker/Cura into PP-25_close-to-100%-density-infill-behaviour-Arachne
|
3 years ago |
|
Jelle Spijker
|
52d639f980
fixed missing , in json
|
3 years ago |
|
Jaime van Kessel
|
34aa7240d4
Merge branch 'PP-55_reduce-cross3D-top-layer-bridge-distance_Arachne' of github.com:Ultimaker/Cura into libArachne_rebased
|
3 years ago |
|
Jelle Spijker
|
322d48cdd7
Fixed speed flow equalization width factor
|
3 years ago |
