Главная Обзор Помощь
Вход
SMusatov
/
Cura
зеркало из https://github.com/Ultimaker/Cura.git
1
0
Ответвить 0
Файлы Вики
Дерево: 4f0f5fbd3e
Ветки Метки

История коммитов

Автор SHA1 Сообщение Дата
  Paul Kuiper 4f0f5fbd3e Decrease initial layer speed for S3 and S5 machine for the high speed print modes to improve robustness (esp. when no glue is used). 11 месяцев назад
  Frederic Meeuwissen d0f1641c4b Set bridging flow to 200 for PETG AA08 02 1 год назад
  Paul Kuiper 1d7ca16f41 Remove "no skin in z gap" from profiles. Created issues in some skin areas. 1 год назад
  Paul Kuiper e87560ef0f - Added PETG visual mode for 0.1mm and 0.06mm 1 год назад
  Paul Kuiper d6897e59c5 - Added extra quick intent profiles for 0.3 and 0.4mm mode 1 год назад
  c.lamboo c2f0a3cbdd Revert "- Added extra quick intent profiles for 0.3 and 0.4mm mode" 1 год назад
  Paul Kuiper dc7cd8f8c5 - Added extra quick intent profiles for 0.3 and 0.4mm mode 1 год назад
  saumyaj3 d66be6d745 Applied printer-linter format 1 год назад
  Paul Kuiper 41562f55b2 Restored PETG and ABS profiles. Lowered outerwall speed to 30mm/s. Reduced gradual flow for PETG and ABS. Added extra parameter to reduce inner wall speeds on top surface. 1 год назад
  Paul Kuiper 8e6c74f296 Remove PETG and ABS profiles for the beta release. 1 год назад
  Paul Kuiper 69dc72dda3 Bug fix. Wrong decimal separator for cooldown and heatup speeds in any color profiles. 1 год назад
  Paul Kuiper f174df9b9e Added extra speeds and accelerations for prime towers, irioning and self support interface layer. 1 год назад
  pkuiper-ultimaker a2e6db45f3 Applied printer-linter format 1 год назад
  Paul Kuiper 84653f08ca Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles) 1 год назад