Cleanup of infill overlap setting. Make it 10% for S line machines and keep it 0% for the other machines. Removed all overwrites from the quality profiles.

Relates to: PP-336

resources/definitions/ultimaker.def.json

@@ -45,6 +45,7 @@
         "gradual_support_infill_step_height": { "value": "4 * layer_height" },
         "gradual_support_infill_steps": { "value": "2 if support_interface_enable and support_structure != 'tree' else 0" },
         "infill_material_flow": { "value": "(1.95-infill_sparse_density / 100 if infill_sparse_density > 95 else 1) * material_flow" },
+        "infill_overlap": { "value": "0 if infill_sparse_density > 80 else 10" },
         "inset_direction": { "value": "'outside_in'" },
         "jerk_infill": { "minimum_value_warning": 20 },
         "jerk_prime_tower": { "minimum_value_warning": 20 },

resources/definitions/ultimaker_s3.def.json

@@ -65,7 +65,6 @@
         "default_material_print_temperature": { "value": "200" },
         "extruder_prime_pos_abs": { "default_value": true },
         "gantry_height": { "value": "55" },
-        "infill_overlap": { "value": "0" },
         "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
         "infill_wipe_dist": { "value": "0" },
         "jerk_enabled": { "value": "True" },

resources/definitions/ultimaker_s5.def.json

@@ -64,7 +64,6 @@
         "default_material_print_temperature": { "value": "200" },
         "extruder_prime_pos_abs": { "default_value": true },
         "gantry_height": { "value": "55" },
-        "infill_overlap": { "value": "0" },
         "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
         "infill_wipe_dist": { "value": "0" },
         "jerk_enabled": { "value": "True" },

resources/quality/ultimaker_s3/um_s3_aa0.25_abs_0.1mm.inst.cfg

@@ -12,6 +12,5 @@ variant = AA 0.25
 weight = 0
 
 [values]
-infill_overlap = =0 if infill_sparse_density > 80 else 15
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 

resources/quality/ultimaker_s3/um_s3_aa0.25_pla_0.1mm.inst.cfg

@@ -13,7 +13,6 @@ weight = 0
 
 [values]
 brim_width = 8
-infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4

resources/quality/ultimaker_s3/um_s3_aa0.25_tough-pla_0.1mm.inst.cfg

@@ -13,7 +13,6 @@ weight = 0
 
 [values]
 brim_width = 8
-infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4

resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = 1
 
 [values]
-infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
 material_print_temperature = =default_material_print_temperature + 10

resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = 0
 
 [values]
-infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -2
 
 [values]
-infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
 material_print_temperature = =default_material_print_temperature + 10