|
|
@@ -41,7 +41,7 @@
|
|
|
"machine_max_jerk_e": { "default_value": 2.5 },
|
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
|
"machine_start_gcode": {
|
|
|
- "default_value": "G21 ; set units to millimeters\nG90 ; use absolute positioning\nM82 ; absolute extrusion mode\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nM104 S{material_print_temperature} ; set extruder temp\nM140 S{material_bed_temperature} ; set bed temp\nM190 S{material_bed_temperature} ; wait for bed temp\nM109 S{material_print_temperature} ; wait for extruder temp\nG92 E0.0 ; reset extruder distance position\nG1 Y-3.0 F1000.0 ; go outside print area\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E21.5 F1000.0 ; intro line\nG92 E0.0 ; reset extruder distance position"
|
|
|
+ "default_value": "G21 ; set units to millimeters\nG90 ; use absolute positioning\nM82 ; absolute extrusion mode\nM104 S{material_print_temperature} ; set extruder temp\nM140 S{material_bed_temperature} ; set bed temp\nM190 S{material_bed_temperature} ; wait for bed temp\nM109 S{material_print_temperature} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG92 E0.0 ; reset extruder distance position\nG1 Y-3.0 F1000.0 ; go outside print area\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E21.5 F1000.0 ; intro line\nG92 E0.0 ; reset extruder distance position"
|
|
|
},
|
|
|
"machine_end_gcode": {
|
|
|
"default_value": "M104 S0 ; turn off extruder\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y210; home X axis and push Y forward\nM84 ; disable motors"
|
Pieter Bos