|
|
@@ -22,8 +22,8 @@
|
|
|
"machine_nozzle_offset_x_1": {"default": 0},
|
|
|
"machine_nozzle_offset_y_1": {"default": 15},
|
|
|
"machine_gcode_flavor": {"default": "RepRap (Marlin/Sprinter)"},
|
|
|
- "machine_start_gcode": {"default": "G28 ; Home extruder\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\n{IF_BED}M190 S{BED}\n{IF_EXT0}M104 T0 S{TEMP0}\n{IF_EXT0}M109 T0 S{TEMP0}\n{IF_EXT1}M104 T1 S{TEMP1}\n{IF_EXT1}M109 T1 S{TEMP1}\nG32 S3 ; auto level\nG92 E0 ; Reset extruder position},
|
|
|
- "machine_end_gcode": {"default": "M104 S0\nG91 ; relative positioning\nG1 E-2 F5000; retract 2mm\nG28 Z; move bed down\nG90 ; absolute positioning\nM84 ; disable motors"},
|
|
|
+ "machine_start_gcode": {"default": "G28 ; Home extruder\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\n{IF_BED}M190 S{BED}\n{IF_EXT0}M104 T0 S{TEMP0}\n{IF_EXT0}M109 T0 S{TEMP0}\n{IF_EXT1}M104 T1 S{TEMP1}\n{IF_EXT1}M109 T1 S{TEMP1}\nG32 S3 ; auto level\nG92 E0 ; Reset extruder position"},
|
|
|
+ "machine_end_gcode": {"default": "M104 S0\nG91 ; relative positioning\nG1 E-2 F5000; retract 2mm\nG28 Z; move bed down\nG90 ; absolute positioning\nM84 ; disable motors"}
|
|
|
},
|
|
|
|
|
|
"overrides": {
|
|
|
@@ -43,6 +43,6 @@
|
|
|
"speed_topbottom": { "default": 30.0, "visible": true },
|
|
|
"speed_travel": { "default": 150.0, "visible": true },
|
|
|
"speed_layer_0": { "min_value": 0.1, "default": 30.0, "visible": true },
|
|
|
- "infill_overlap": { "default": 10.0 },
|
|
|
+ "infill_overlap": { "default": 10.0 }
|
|
|
}
|
|
|
}
|
adamarumjahn