New Definition

resources/definitions/arjun300.def.json

@@ -0,0 +1,54 @@
+{
+    "version": 2,
+    "name": "Arjun 300",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Venkat Kamesh",
+        "manufacturer": "Sri Vignan Technologies",
+        "weight": 3,
+        "file_formats": "text/x-gcode",
+        "platform": "arjun300_platform.stl",
+        "platform_offset": [-155, -6, 190],
+        "has_material": true,
+        "has_variants": true,
+        "preferred_variant_name": "0.4 mm",
+        "machine_extruder_trains":
+        {
+            "0": "arjun_extruder_0",
+            "1": "arjun_extruder_1"
+        }
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "Arjun 300" },
+        "machine_width": { "default_value": 317 },
+        "machine_height": { "default_value": 290 },
+        "machine_depth": { "default_value": 310 },
+        "machine_center_is_zero": {"default_value": false},
+        "machine_heated_bed": { "default_value": true },
+        "machine_nozzle_size": {"default_value": 0.4},
+        "machine_show_variants": {"default_value": true},
+        "machine_acceleration": {"default_value": 2000},
+        "machine_max_feedrate_x": { "value": 300 },
+        "machine_max_feedrate_y": { "value": 300 },
+        "machine_max_feedrate_z": { "value": 15 },
+        "machine_max_feedrate_e": { "value": 150 },
+        "machine_use_extruder_offset_to_offset_coords": {"default_value": false},
+        "line_width": {"value": "machine_nozzle_size"},
+        "speed_travel": {"maximum_value": "300", "value": "200"},
+        "optimize_wall_printing_order": { "value": "True" },
+        "material_diameter": { "default_value": 1.75},
+        "retraction_amount": {"default_value": 6.5},
+        "retraction_speed": { "default_value": 30},
+        
+		"adhesion_type": { "default_value": "skirt" },
+        "machine_gcode_flavor": { "default_value": "Marlin"},
+	    "ironing_enabled":{"label": "Enable Ironing",
+                    "description": "Go over the top surface one additional time, but this time extruding very little material. This is meant to melt the plastic on top further, creating a smoother surface. The pressure in the nozzle chamber is kept high so that the creases in the surface are filled with material.",
+                    "type": "bool", "default_value": true, "limit_to_extruder": "top_bottom_extruder_nr", "settable_per_mesh": true },
+        "machine_start_gcode": { "default_value": "M605 S0\nG21\nG90\nM82\nM107\nT1\nG28\nG1 Z0.3 F150\nT1\nG92 E0\nG1 E45 F210\nG92 E0\nT0\nG92 E0\nG1 E45 F210\nG92 E0\nM117\n"},
+        "machine_end_gcode": { "default_value": "G91\nG1 Z+0.5 E-16 Y+10 F9000\nG90\nM107\nM104 S0 T1\nM104 S0 T0\nM140 S0\nM117\nG28 X0 Y0\nT0\nM84"},
+        "machine_extruder_count": { "default_value": 2 }
+    }
+}

resources/definitions/arjun_duplication.def.json

@@ -0,0 +1,51 @@
+{
+    "version": 2,
+    "name": "Arjun 300 Duplication",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Venkat Kamesh",
+        "manufacturer": "Sri Vignan Technologies",
+        "weight": 3,
+        "file_formats": "text/x-gcode",
+        "has_material": true,
+        "has_variants": true,
+        "preferred_variant_name": "0.4 mm",
+        "machine_extruder_trains":
+        {
+            "0": "arjun_dm_extruder"
+        }
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "Arjun 300 Duplication" },
+        "machine_width": { "default_value": 158.5 },
+        "machine_height": { "default_value": 290 },
+        "machine_depth": { "default_value": 310 },
+        "machine_center_is_zero": {"default_value": false},
+        "machine_heated_bed": { "default_value": true },
+        "machine_nozzle_size": {"default_value": 0.4},
+        "machine_show_variants": {"default_value": true},
+        "machine_acceleration": {"default_value": 2000},
+        "machine_max_feedrate_x": { "value": 300 },
+        "machine_max_feedrate_y": { "value": 300 },
+        "machine_max_feedrate_z": { "value": 15 },
+        "machine_max_feedrate_e": { "value": 150 },
+        "machine_use_extruder_offset_to_offset_coords": {"default_value": false},
+        "line_width": {"value": "machine_nozzle_size"},
+        "speed_travel": {"maximum_value": "300", "value": "200"},
+        "optimize_wall_printing_order": { "value": "True" },
+        "material_diameter": { "default_value": 1.75},
+        "retraction_amount": {"default_value": 6.5},
+        "retraction_speed": { "default_value": 30},
+        
+		"adhesion_type": { "default_value": "skirt" },
+        "machine_gcode_flavor": { "default_value": "Marlin"},
+	    "ironing_enabled":{"label": "Enable Ironing",
+                    "description": "Go over the top surface one additional time, but this time extruding very little material. This is meant to melt the plastic on top further, creating a smoother surface. The pressure in the nozzle chamber is kept high so that the creases in the surface are filled with material.",
+                    "type": "bool", "default_value": true, "limit_to_extruder": "top_bottom_extruder_nr", "settable_per_mesh": true },
+        "machine_start_gcode": {"default_value": "M605 S2 R0 X155\nG21\nG90\nM82\nM107\nM104 S{material_print_temperature}\nM105\nM109 S{material_print_temperature}\nG28 Z0\nG1 Z15 F150\nG28 Y0\nG1 Y20 F6000\nG28 X0\nG1 X80 F9000\nT0\nG92 E0\nG1 E35 F250\nG1 E45 F120\nG92 E0\nG1 X100 Z0 F5000\nG1 X145 F9000\nM117\n"},
+        "machine_end_gcode": {"default_value": "G91\nG1 Z+0.5 E-16 Y+10 F9000\nG90\nM107\nM107 P1\nM104 S0\nM140 S0\nM117\nM605 S0\nG28 X0 Y0\nM84"},
+        "machine_extruder_count": { "default_value": 1 }
+    }
+}

resources/definitions/arjun_mirrored.def.json

@@ -0,0 +1,51 @@
+{
+    "version": 2,
+    "name": "Arjun 300 Mirror",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Venkat Kamesh",
+        "manufacturer": "Sri Vignan Technologies",
+        "weight": 3,
+        "file_formats": "text/x-gcode",
+        "has_material": true,
+        "has_variants": true,
+        "preferred_variant_name": "0.4 mm",
+        "machine_extruder_trains":
+        {
+            "0": "arjun_mm_extruder"
+        }
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "Arjun 300 Mirror" },
+        "machine_width": { "default_value": 158.5 },
+        "machine_height": { "default_value": 290 },
+        "machine_depth": { "default_value": 310 },
+        "machine_center_is_zero": {"default_value": false},
+        "machine_heated_bed": { "default_value": true },
+        "machine_nozzle_size": {"default_value": 0.4},
+        "machine_show_variants": {"default_value": true},
+        "machine_acceleration": {"default_value": 2000},
+        "machine_max_feedrate_x": { "value": 300 },
+        "machine_max_feedrate_y": { "value": 300 },
+        "machine_max_feedrate_z": { "value": 15 },
+        "machine_max_feedrate_e": { "value": 150 },
+        "machine_use_extruder_offset_to_offset_coords": {"default_value": false},
+        "line_width": {"value": "machine_nozzle_size"},
+        "speed_travel": {"maximum_value": "300", "value": "200"},
+        "optimize_wall_printing_order": { "value": "True" },
+        "material_diameter": { "default_value": 1.75},
+        "retraction_amount": {"default_value": 6.5},
+        "retraction_speed": { "default_value": 30},
+        
+		"adhesion_type": { "default_value": "skirt" },
+        "machine_gcode_flavor": { "default_value": "Marlin"},
+	    "ironing_enabled":{"label": "Enable Ironing",
+                    "description": "Go over the top surface one additional time, but this time extruding very little material. This is meant to melt the plastic on top further, creating a smoother surface. The pressure in the nozzle chamber is kept high so that the creases in the surface are filled with material.",
+                    "type": "bool", "default_value": true, "limit_to_extruder": "top_bottom_extruder_nr", "settable_per_mesh": true },
+        "machine_start_gcode": {"default_value": "M605 S2 R0 X155\nM605 S3 X155\nG21\nG90\nM82\nM107\nM104 S{material_print_temperature}\nM105\nM109 S{material_print_temperature}\nG28 Z0\nG1 Z15 F150\nG28 Y0\nG1 Y20 F6000\nG28 X0\nG1 X80 F9000\nT0\nG92 E0\nG1 E35 F250\nG1 E45 F120\nG92 E0\nG1 X100 Z0 F5000\nG1 X145 F9000\nM117\n"},
+        "machine_end_gcode": {"default_value": "G91\nG1 Z+0.5 E-16 Y+10 F9000\nG90\nM107\nM107 P1\nM104 S0\nM140 S0\nM117\nM605 S0\nG28 X0 Y0\nM84"},
+        "machine_extruder_count": { "default_value": 1 }
+    }
+}

resources/extruders/arjun_dm_extruder.def.json

@@ -0,0 +1,20 @@
+{
+    "version": 2,
+    "name": "Duplication Extruder",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "arjun_duplication",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 0,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_offset_x": { "default_value": 0 },
+        "machine_nozzle_offset_y": { "default_value": 0 }
+    }
+}

resources/extruders/arjun_extruder_0.def.json

@@ -0,0 +1,27 @@
+{
+    "version": 2,
+    "name": "Left Extruder",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "arjun300",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 0,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_offset_x": { "default_value": 0 },
+        "machine_nozzle_offset_y": { "default_value": 0 },
+        "machine_extruder_start_pos_abs": { "default_value": true },
+        "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },
+        "machine_extruder_start_pos_y": { "value": "prime_tower_position_y" },
+        "machine_extruder_end_pos_abs": { "default_value": true },
+        "machine_extruder_end_pos_x": { "value": -51 },
+        "machine_extruder_end_pos_y": { "value": "prime_tower_position_y" },
+        "machine_extruder_start_code": { "default_value": "T0" }
+    }
+}

resources/extruders/arjun_extruder_1.def.json

@@ -0,0 +1,27 @@
+{
+    "version": 2,
+    "name": "Right Extruder",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "arjun300",
+        "position": "1"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 1,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_offset_x": { "default_value": 0.0 },
+        "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "machine_extruder_start_pos_abs": { "default_value": true },
+        "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },
+        "machine_extruder_start_pos_y": { "value": "prime_tower_position_y" },
+        "machine_extruder_end_pos_abs": { "default_value": true },
+        "machine_extruder_end_pos_x": { "value": 257 },
+        "machine_extruder_end_pos_y": { "value": "prime_tower_position_y" },
+        "machine_extruder_start_code": { "default_value": "T1" }
+    }
+}

resources/extruders/arjun_mm_extruder.def.json

@@ -0,0 +1,20 @@
+{
+    "version": 2,
+    "name": "Mirror Extruder",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "arjun_mirrored",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 0,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_offset_x": { "default_value": 0 },
+        "machine_nozzle_offset_y": { "default_value": 0 }
+    }
+}

resources/variants/arjun300_0.2.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.2 mm Nozzle
+version = 4
+definition = arjun300
+
+[metadata]
+
+setting_version = 16
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.2

resources/variants/arjun300_0.3.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.3 mm Nozzle
+version = 4
+definition = arjun300
+
+[metadata]
+
+setting_version = 16
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.3