no infill overlap for high density infill

To avoid over extrusion for high density infill in overlap needs to be set to zero. (see PP-25)

resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg

@@ -17,7 +17,7 @@ cool_fan_speed = 50
 cool_fan_speed_min = =cool_fan_speed * 25 / 50
 cool_min_layer_time = 3
 cool_min_speed = 8
-infill_overlap = 5
+infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 30
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37

resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg

@@ -17,7 +17,7 @@ cool_fan_speed = 50
 cool_fan_speed_min = =cool_fan_speed * 25 / 50
 cool_min_layer_time = 3
 cool_min_speed = 8
-infill_overlap = 5
+infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 30
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37

resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg

@@ -17,7 +17,7 @@ cool_fan_speed = 45
 cool_fan_speed_min = =cool_fan_speed * 25 / 45
 cool_min_layer_time = 3
 cool_min_speed = 8
-infill_overlap = 5
+infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 35
 layer_0_z_overlap = 0.22
 

resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg

@@ -17,7 +17,7 @@ cool_fan_speed = 45
 cool_fan_speed_min = =cool_fan_speed * 25 / 45
 cool_min_layer_time = 3
 cool_min_speed = 8
-infill_overlap = 5
+infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 35
 layer_0_z_overlap = 0.22
 

resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg

@@ -17,7 +17,7 @@ brim_line_count = 10
 cool_fan_speed = 50
 cool_fan_speed_min = =cool_fan_speed * 25 / 50
 cool_min_layer_time = 3
-infill_overlap = 5
+infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 40
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37

resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg

@@ -17,7 +17,7 @@ brim_line_count = 10
 cool_fan_speed = 50
 cool_fan_speed_min = =cool_fan_speed * 25 / 50
 cool_min_layer_time = 3
-infill_overlap = 5
+infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 40
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37

resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg

@@ -17,7 +17,7 @@ brim_line_count = 8
 cool_fan_speed = 60
 cool_fan_speed_min = =cool_fan_speed * 35 / 60
 cool_min_speed = 15
-infill_overlap = 5
+infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 25
 layer_0_z_overlap = 0.1
 raft_airgap = 0.15

resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg

@@ -17,7 +17,7 @@ brim_line_count = 8
 cool_fan_speed = 60
 cool_fan_speed_min = =cool_fan_speed * 35 / 60
 cool_min_speed = 15
-infill_overlap = 5
+infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 25
 layer_0_z_overlap = 0.1
 raft_airgap = 0.15

resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg

@@ -16,7 +16,7 @@ adhesion_type = raft
 cool_fan_speed_min = =cool_fan_speed * 0.35
 cool_min_layer_time = 3
 cool_min_speed = 15
-infill_overlap = 5
+infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 30
 layer_0_z_overlap = 0.22
 raft_airgap = 0.57

resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg

@@ -16,7 +16,7 @@ adhesion_type = raft
 cool_fan_speed_min = =cool_fan_speed * 0.35
 cool_min_layer_time = 3
 cool_min_speed = 15
-infill_overlap = 5
+infill_overlap = =0 if infill_sparse_density > 80 else 5
 infill_sparse_density = 30
 layer_0_z_overlap = 0.22
 raft_airgap = 0.57