JSON fix: fixed all start/end gcode references to settings and non-existent variables

resources/definitions/innovo_inventor.def.json

@@ -54,7 +54,7 @@
             "default_value": "RepRap (Marlin/Sprinter)"
         },
         "machine_start_gcode": {
-            "default_value": "G28 ; Home extruder\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\n{IF_BED}M190 S{BED}\n{IF_EXT0}M104 T0 S{TEMP0}\n{IF_EXT0}M109 T0 S{TEMP0}\n{IF_EXT1}M104 T1 S{TEMP1}\n{IF_EXT1}M109 T1 S{TEMP1}\nG32 S3 ; auto level\nG92 E0 ; Reset extruder position"
+            "default_value": "G28 ; Home extruder\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nM190 S{material_bed_temperature}\nM104 T0 S{material_print_temperature}\nM109 T0 S{material_print_temperature}\nM104 T1 S{material_print_temperature}\nM109 T1 S{material_print_temperature}\nG32 S3 ; auto level\nG92 E0 ; Reset extruder position"
         },
         "machine_end_gcode": {
             "default_value": "M104 S0 ; turn off extruders\nM140 S0 ; heated bed heater off\nG91 ; relative positioning\nG1 E-2 F5000; retract 2mm\nG28 Z; move bed down\nG90 ; absolute positioning\nM84   ; disable motors"

resources/definitions/julia.def.json

@@ -14,10 +14,10 @@
 
     "overrides": {
         "machine_start_gcode": {
-            "default_value": " ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}\n ;Print time: {print_time}\n ;Filament used: {filament_amount}m {filament_weight}g\n ;Filament cost: {filament_cost}\n G21        ;metric values\n M107\n G28\n G29\n G90        ;absolute positioning\n G92 E0; reset extruder distance\n G1 Z5 F300 ;move nozzle up 5mm for safe homing\n G1 X0 Y0 Z0 F5000; move nozzle to home\n M300 S600P200\n M300 S800 P200\n M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n M109 S{print_temperature} ;Uncomment to add your own temperature line\n M82        ;set extruder to absolute mode\n M107       ;start with the fan off\n G1 Z15.0 F{travel_speed} ;move the platform down 15mm\n G92 E0                  ;zero the extruded length\n G1 F200 E3              ;extrude 3mm of feed stock\n G92 E0                  ;zero the extruded length again\n G1 F{travel_speed}\n ;Put printing message on LCD screen\n M117 Printing...\n"
+            "default_value": " ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n ;metric values\n M107\n G28\n G29\n G90        ;absolute positioning\n G92 E0; reset extruder distance\n G1 Z5 F300 ;move nozzle up 5mm for safe homing\n G1 X0 Y0 Z0 F5000; move nozzle to home\n M300 S600P200\n M300 S800 P200\n M190 S{material_bed_temperature} ;Uncomment to add your own bed temperature line\n M109 S{material_print_temperature} ;Uncomment to add your own temperature line\n M82        ;set extruder to absolute mode\n M107       ;start with the fan off\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0                  ;zero the extruded length\n G1 F200 E3              ;extrude 3mm of feed stock\n G92 E0                  ;zero the extruded length again\n G1 F{speed_travel}\n ;Put printing message on LCD screen\n M117 Printing...\n"
         },
         "machine_end_gcode": {
-            "default_value": " M104 S0                     ;extruder heater off\n M140 S0                     ;heated bed heater off (if you have it)\n G91                                    ;relative positioning\n G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\n G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\n M84                         ;steppers off\n G90                         ;absolute positioning\n ;{profile_string}\n"
+            "default_value": " M104 S0                     ;extruder heater off\n M140 S0                     ;heated bed heater off (if you have it)\n G91                                    ;relative positioning\n G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\n M84                         ;steppers off\n G90                         ;absolute positioning\n"
         },
         "material_bed_temperature": { "default_value": 100 },
         "layer_height": { "default_value": 0.2 },

resources/definitions/kupido.def.json

@@ -15,10 +15,10 @@
     "overrides": {
         "machine_name": { "default_value": "Kupido" },
         "machine_start_gcode": {
-            "default_value": " ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}\n ;Print time: {print_time}\n ;Filament used: {filament_amount}m {filament_weight}g\n ;Filament cost: {filament_cost}\n ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n ;M109 S{print_temperature} ;Uncomment to add your own temperature line\n G21        ;metric values\n G90        ;absolute positioning\n M82        ;set extruder to absolute mode\n M107       ;start with the fan off\n G28 X0 Y0  ;move X Y to endstops\n G28 Z0     ;move Z to endstops\n G1 Z20.0 F{40} ;move the platform down 20mm\n G1 Y0 X170 F{travel_speed}\n G92 E0                  ;zero the extruded length\n G1 F200 E10              ;extrude 3mm of feed stock\n G92 E0                  ;zero the extruded length again\n G4 P7000\n G1 F{travel_speed}\n ;Put printing message on LCD screen\n M117 Printing...\n"
+            "default_value": " ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n ;M190 S{material_bed_temperature} ;Uncomment to add your own bed temperature line\n ;M109 S{material_print_temperature} ;Uncomment to add your own temperature line\n G21        ;metric values\n G90        ;absolute positioning\n M82        ;set extruder to absolute mode\n M107       ;start with the fan off\n G28 X0 Y0  ;move X Y to endstops\n G28 Z0     ;move Z to endstops\n G1 Z20.0 F40 ;move the platform down 20mm\n G1 Y0 X170 F{speed_travel}\n G92 E0                  ;zero the extruded length\n G1 F200 E10              ;extrude 3mm of feed stock\n G92 E0                  ;zero the extruded length again\n G4 P7000\n G1 F{speed_travel}\n ;Put printing message on LCD screen\n M117 Printing...\n"
         },
         "machine_end_gcode": {
-            "default_value": " M104 S0                     ;extruder heater off\n M140 S0                     ;heated bed heater off (if you have it)\n G91                                    ;relative positioning\n G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\n G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\n M84                         ;steppers off\n G90                         ;absolute positioning\n ;{profile_string}\n"
+            "default_value": " M104 S0                     ;extruder heater off\n M140 S0                     ;heated bed heater off (if you have it)\n G91                                    ;relative positioning\n G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\n M84                         ;steppers off\n G90                         ;absolute positioning\n"
         },
         "prime_tower_size": { "default_value": 8.660254037844387 },
         "retraction_speed": { "default_value": 60 },

resources/definitions/rigidbot.def.json

@@ -39,10 +39,10 @@
             "default_value": "RepRap (Marlin/Sprinter)"
         },
         "machine_start_gcode": {
-            "default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nM205 X8 ;X/Y Jerk settings\nG1 Z15.0 F{travel_speed} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E7 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\n;Put printing message on LCD screen\nM117 Rigibot Printing..."
+            "default_value": ";Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n;M190 S{material_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{material_print_temperature} ;Uncomment to add your own temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nM205 X8 ;X/Y Jerk settings\nG1 Z15.0 F{travel_speed} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E7 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\n;Put printing message on LCD screen\nM117 Rigibot Printing..."
         },
         "machine_end_gcode": {
-            "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+10 E-1 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y230 F3000 ;move Y so the head is out of the way and Plate is moved forward\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
+            "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+10 E-1 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y230 F3000 ;move Y so the head is out of the way and Plate is moved forward\nM84 ;steppers off\nG90 ;absolute positioning"
         },
         "layer_height": {
             "default_value": 0.2

resources/definitions/rigidbot_big.def.json

@@ -42,10 +42,10 @@
             "default_value": "RepRap (Marlin/Sprinter)"
         },
         "machine_start_gcode": {
-            "default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nM205 X8 ;X/Y Jerk settings\nG1 Z15.0 F{travel_speed} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E7 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\n;Put printing message on LCD screen\nM117 Rigibot Printing..."
+            "default_value": ";Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n;Print time: {print_time}\n;M190 S{material_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{material_print_temperature} ;Uncomment to add your own temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nM205 X8 ;X/Y Jerk settings\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E7 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\n;Put printing message on LCD screen\nM117 Rigibot Printing..."
         },
         "machine_end_gcode": {
-            "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+10 E-1 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y230 F3000 ;move Y so the head is out of the way and Plate is moved forward\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
+            "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+10 E-1 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y230 F3000 ;move Y so the head is out of the way and Plate is moved forward\nM84 ;steppers off\nG90 ;absolute positioning"
         },
         "layer_height": {
             "default_value": 0.2

resources/definitions/robo_3d_r1.def.json

@@ -17,7 +17,7 @@
             "default_value": " G92 E0 ;\n M565 Z-1 ;\n G1 Z5 F5000 ;\n G29 ;\n"
         },
         "machine_end_gcode": {
-            "default_value": " M104 S0                     ;extruder heater off\n M140 S0                     ;heated bed heater off (if you have it)\n G91                                    ;relative positioning\n G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\n G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\n M84                         ;steppers off\n G90                         ;absolute positioning\n ;{profile_string}\n"
+            "default_value": " M104 S0                     ;extruder heater off\n M140 S0                     ;heated bed heater off (if you have it)\n G91                                    ;relative positioning\n G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\n M84                         ;steppers off\n G90                         ;absolute positioning\n"
         },
         "cool_min_layer_time": { "default_value": 7 },
         "speed_topbottom": { "default_value": 40 },