Enhance Dagoma DiscoEasy200 profile and add Dagoma Neva stuff (profile and mesh).

resources/definitions/dagoma_discoeasy200.def.json

@@ -7,7 +7,6 @@
         "author": "Dagoma",
         "manufacturer": "Dagoma",
         "file_formats": "text/x-gcode",
-        "icon": "icon_discoeasy200.png",
         "platform": "discoeasy200.stl",
         "platform_offset": [ 105, -59, 280]
     },
@@ -39,13 +38,25 @@
             "default_value": 10
         },
         "machine_start_gcode": {
-            "default_value": ";Gcode by Cura\nG90   ;absolute positioning\nM106 S250 ;fan on for the palpeur\nG28 X Y\nG1 X50\nM109 S180\nG28\nM104 S{material_print_temperature_layer_0}\n;Activation palpeur\n;bloc palpeur\nG29 ;Auto level\nM107 ;start with the fan off\nG1 X100 Y20 F3000\nG1 Z0.5\nM109 S{material_print_temperature_layer_0}\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z3\nG1 F6000"
+            "default_value": ";Gcode by Cura\nG90\nM106 S250\nG28 X Y\nG1 X50\nM109 S180\nG28\nM104 S{material_print_temperature_layer_0}\nG29\nM107\nG1 X100 Y20 F3000\nG1 Z0.5\nM109 S{material_print_temperature_layer_0}\nM82\nG92 E0\nG1 F200 E10\nG92 E0\nG1 Z3\nG1 F6000\n"
         },
         "machine_end_gcode": {
-            "default_value": "M104 S0\nM106 S255   ;start fan full power\nM140 S0   ;heated bed heater off (if you have it)\n;Home machine\nG91   ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+3 F3000  ;move Z up a bit and retract filament even more\nG90\nG28 X Y\n;Ventilation forcee\nM107    ;stop fan\n;Shut down motor\nM84   ;shut down motors"
+            "default_value": "\nM104 S0\nM106 S255\nM140 S0\nG91\nG1 E-1 F300\nG1 Z+3 F3000\nG90\nG28 X Y\nM107\nM84\n"
         },
         "material_diameter": {
             "default_value": 1.75
+        },
+        "speed_print": {
+            "default_value": 60
+        },
+        "speed_travel": {
+            "default_value": 100
+        },
+        "retraction_amount": {
+            "default_value": 3.5
+        },
+        "retraction_speed": {
+            "default_value": 50
         }
     }
 }

resources/definitions/dagoma_neva.def.json

@@ -0,0 +1,69 @@
+{
+    "id": "Dagoma_neva",
+    "name": "Dagoma NEVA",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Dagoma",
+        "manufacturer": "Dagoma",
+        "file_formats": "text/x-gcode",
+        "platform": "neva.stl",
+        "platform_offset": [ 0, 0, 0]
+    },
+    "overrides": {
+        "machine_width": {
+            "default_value": 195.55
+        },
+        "machine_height": {
+            "default_value": 205
+        },
+        "machine_depth": {
+            "default_value": 195.55
+        },
+        "machine_center_is_zero": {
+            "default_value": true
+        },
+        "machine_nozzle_size": {
+            "default_value": 0.4
+        },
+        "machine_head_with_fans_polygon": {
+            "default_value": [
+                [17, 40],
+                [17, -70],
+                [-17, -70],
+                [17, 40]
+            ]
+        },
+        "gantry_height": {
+          "default_value": 0
+        },
+        "machine_shape": {
+            "default_value": "elliptic"
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap"
+        },
+        "machine_start_gcode": {
+            "default_value": ";Gcode by Cura\nG90\nG28\nM109 S100\nG29\nM104 S{material_print_temperature_layer_0}\nG0 X0 Y-85\nG0 Z0.26\nM109 S{material_print_temperature_layer_0}\nM82\nG92 E0\nG1 F200 E6\nG92 E0\nG1 F200 E-3.5\nG0 Z0.15\nG0 X10\nG0 Z3\nG1 F6000\n"
+        },
+        "machine_end_gcode": {
+            "default_value": "\nM104 S0\nM106 S255\nM140 S0\nG91\nG1 E-1 F300\nG1 Z+3 E-2 F9000\nG90\nG28\n"
+        },
+        "material_diameter": {
+            "default_value": 1.75
+        },
+        "speed_print": {
+            "default_value": 40
+        },
+        "speed_travel": {
+            "default_value": 120
+        },
+        "retraction_amount": {
+            "default_value": 3.8
+        },
+        "retraction_speed": {
+            "default_value": 60
+        }
+    }
+}